Classe Audio | CQDF201U | Operating instructions | Classe Audio CA-201 Operating instructions

Removable Full Front High-Power CD Player/
Receiver
BAN
CQ-DF201U
D
APM/SCAN
45WX4 CD RECEIVER
OPEN
bright display with level meters
LEVEL
VOL
TUNE
TRACK
CLOCK
DISP
R EMO
L
SE
SOURCE
Récepteur/lecteur CD à puissance élevée
avec panneau avant entièrement amovible
TE
MUTE
•
PWR
MONO/LOC
7
1
8
2
9
3
10
4
11
5
12
6
RANDOM
LOUD
REP
Reproductor CD/receptor de alta potencia con
placa frontal completamente removible
CQ-DF201U
Operating Instructions
Manuel d’instructions
Manual de instrucciones
≥ Please read these instructions carefully before using this product and save this manual for future use.
≥ Prière de lire ces instructions attentivement avant d’utiliser Ie produit et garder ce manuel pour l’utilisation ultérieure.
≥ Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.
Safety Information
E
N
G
L
I
S
H
Consignes de sécurité
Radio Frequency Interference Statement:
Applies only in U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to
Part 15 of the FCC Rules.
≥ These limits are designed to provide reasonable protection against harmful interference in an automobile installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio reception, which can be determined by
turning the equipment off and on, the user is encouraged to consult the dealer or an experience radio
technician for help.
FCC Warning:
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate
this device.
This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
For Canada:
This Class B digital apparatus complies with Canadian ICES-003.
WARNING:
Label Indication and Location
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
THIS PRODUCT IS A CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
Laser products:
Wave length: 780 nm
Laser power: No hazardous radiation is emitted
with safety protection.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.
2
CQ-DF201U
MISE EN GARDE:
ADVERTENCIA:
POUR RÉDUIRE LES RISQUES D’INCENDIE OU D’ÉLECTROCUTION, N’EXPOSEZ PAS CET APPAREIL À LA
PLUIE OU À L’HUMIDITÉ.
PARA REDUCIR EL RIESGO DE INCENDIOS O
SACUDIDAS ELÉCTRICAS, NO EXPONGA ESTE
PRODUCTO A LA LLUVIA NI A LA HUMEDAD.
ATTENTION :
PRECAUCIÓN:
CET APPAREIL EST UN PRODUIT LASER DE LA CLASSE
I.
L’UTILISATION DE COMMANDES OU RÉGLAGES OU
L’EXÉCUTION D’OPÉRATIONS AUTRES QUE CELLES
QUI SONT INDIQUÉES DANS CE DOCUMENT PEUVENT
RÉSULTER EN UNE EXPOSITION À UN RAYONNEMENT
DANGEREUX.
N’OUVREZ PAS LES COUVERCLES ET N’ESSAYEZ PAS
D’EFFECTUER VOUS-MÊME DES RÉPARATIONS.
ADRESSEZ-VOUS À UN PERSONNEL QUALIFIÉ POUR
TOUTE RÉPARATION.
ÉSTE ES UN PRODUCTO LÁSER DE LA CLASE I.
LA UTILIZACIÓN DE CONTROLES, EL HACER
AJUSTES O EL SEGUIR PROCEDIMIENTOS DISTINTOS
DE LOS ESPECIFICADOS EN ESTE MANUAL PODRÍA
CAUSAR UNA EXPOSICIÓN PELIGROSA A LA RADIACIÓN.
NO ABRA LAS CUBIERTAS NI HAGA REPARACIONES
USTED MISMO. SOLICITE LOS TRABAJOS DE SERVICIO AL PERSONAL CALIFICADO.
Produits laser:
Productos láser:
Longueur d’onde: 780 nm
Puissance du laser: Aucune radiation dangereuse
n’est émise avec la protection de
sécurité.
Longitud de onda: 780 nm
Potencia láser: Con protección de seguridad no se
emite radiación peligrosa.
AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU
D’INTERFÉRENCES, UTILISER UNIQUEMENT LES
COMPOSANTS FOURNIS.
PARA REDUCIR EL RIESGO DE INCENDIOS O SACUDIDAS ELÉCTRICAS, Y PARA EVITAR LAS
INTERFERENCIAS MOLESTAS, UTILICE
SOLAMENTE LOS COMPONENTES INCLUIDOS.
Il est recommandé de noter, dans l’espace prévu cidessous, les numéros de modèle et de série inscrits soit
à l’arrière soit sous le fond de l’appareil, et de conserver
ce manuel comme mémorandum de l’achat afin de permettre l’identification de l’appareil en cas de vol.
Busque el número del modelo y el número de serie ya
sea en la parte trasera o en el fondo de la unidad. Sírvase
anotar dichos números en el espacio siguiente, y mantenga este librete como una anotación permanente de su
compra para ayudar en la identificación en el caso de
robo.
Model No.
N˚ De Modèle C Q - D F 2 0 1 U
CAUTION:
12V
4~8
15A
Información para su seguridad
F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
FM75
Manufactured by Dalian Matsushita
Communication Industrial Co., Ltd.
Dalian China Made in China
Serial No.
N˚ De Série
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
condition that this device does not cause
harmful interference.
Find the model number and serial number on either
the back or bottom of the unit. Please record them
in the space below and retain this booklet as a permanent record of your purchase to help with identification in case of theft.
MODEL NUMBER
CQ-DF201U
NUMÉRO DE MODÈLE
NUMÉRO DE SÉRIE
SERIAL NUMBER
DATE DE L’ACHAT
DATE PURCHASED
VENDEUR
CQ-DF201U
NÚMERO DEL MODELO
CQ-DF201U
NÚMERO DE SERIE
FACHA DE COMPRA
NOMBRE DE LA TIENDA
FROM
CQ-DF201U
3
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical
engineering, manufactured with carefully selected components and assembled by people who take pride in
their work. Once you discover the quality, reliability, and value we have built into this product, you too will
be proud to be a member of our family.
E
N
G
L
I
S
H
❐ Use this Product Safely
❐ Précautions à prendre
When Driving
Disc Mechanism
Au volant
Mécanisme de disque
Keep the volume level low enough to be aware of
road and traffic conditions.
Do not insert coins or any small objects. Keep
screwdrivers and other metallic objects away from
the disc mechanism and disc.
Réglez le volume à un niveau qui ne risque pas de masquer les bruits ambiants.
N’insérez pas de pièces de monnaie ou de petits objets.
Gardez les tournevis et autres objets métalliques à l’écart
du mécanisme de disque et du disque.
Use Authorized Servicenters
Do not attempt to disassemble or adjust this precision product. Please refer to the Servicenter list including with this product for service assistance.
Afin de prévenir tout risque de court-circuit ou d’incendie, n’exposez pas l’équipement, y compris les hautparleurs et les disques, à l’eau ou à une humidité
excessive.
For Installation
Voiture stationnée
When Car Washing
Do not expose the product, including the speakers
and CDs, to water or excessive moisture. This
could cause electrical shorts, fire, or other damage.
When Parked
Parking in direct sunlight can produce very high
temperatures inside your car. Give the interior a
chance to cool down before switching the unit on.
Use the Proper Power Supply
4
Panasonic est heureuse de vous compter parmi les utilisateurs de ses appareils électroniques. Nous pouvons vous assurer que cet appareil vous procurera de longues heures d’agrément. Notre réputation est
fondée sur une ingénierie électronique et mécanique de haute précision, laquelle préside à la fabrication
d’appareils ne comportant que des composants de choix assemblés par un personnel soucieux de la
bonne réputation acquise par la qualité de son travail. Après avoir découvert la qualité, la valeur et la fiabilité de cet appareil, vous aussi serez fier d’être un client Panasonic.
This product should be installed in a horizontal position with the front end up at a convenient angle,
but not more than 30x.
Lavage de la voiture
L’habitacle d’une voiture immobile exposée au soleil
toutes vitres fermées devient rapidement très chaud.
Laisser rafraîchir l’intérieur du véhicule avant d’utiliser
l’appareil.
This product is designed to operate with a 12 volt,
negative ground battery system (the normal system
in a North American car).
Source d’alimentation
❐ Components
❐ Éléments constitutifs
≥ Operating instructions .................................... 1
≥ Installation hardware................1 set (➡ page 18)
≥ Power connector ............................................ 1
≥ Remote control unit ........................................ 1
≥ Lithium battery (CR2025)................................ 1
≥ Warranty card.................................................. 1
≥ Manuel d’instructions.............................................. 1
≥ Quincaillerie pour l’installation
..............................................1 ensemble (➡ page 38)
≥ Connecteur d’alimentation ...................................... 1
≥ Télécommande ........................................................ 1
≥ Pile au lithium (CR2025) ........................................ 1
≥ Carte de garantie .................................................... 1
CQ-DF201U
F
R
A
N
Ç
A
I
S
Réparation
Ne tentez pas de démonter ou d’ajuster l’appareil vousmême. Veuillez vous référer à la liste des centres de service fournie avec cet appareil pour contacter le service
d’assistance.
Installation
L’apppareil doit être installé en position horizontale avec
son extrémité avant inclinée vers le haut à un angle commode, mais ne dépassant pas 30x.
Cet appareil est conçu pour fonctionner sur un système
d’alimentation avec batterie de 12 V à masse négative
(système standard sur les voitures de construction nordaméricaine).
CQ-DF201U
5
Panasonic le da la bienvenida a la familia constantemente en aumento de poseedores de productos electrónicos. Nos esforzamos en proporcionarle las ventajas de la ingeniería mecánica y electrónica de precisión, de una fabricación con componentes cuidadosamente seleccionados, y de un montaje realizado
por personas orgullosas de la reputación que su trabajo ha cimentado para nuestra empresa. Estamos seguros de que este producto le proporcionará muchas horas de distracción y, una vez comprobada la calidad, el valor y la fiabilidad incorporados, usted también se sentirá orgulloso de pertenecer a nuestra
familia.
❐ Uso de este equipo con seguridad
Cuando conduzca
Mecanismo de disco
Mantenga el nivel del volumen suficientemente bajo para
estar atento a la carretera y a las condiciones del tráfico.
No inserte monedas ni ningún objeto pequeño. Mantenga
los destornilladores u otros objetos metálicos apartados
del mecanismo de disco y del disco.
Cuando lave el automóvil
No exponga el equipo, incluyendo los altavoces y los
CDs, al agua o a una humedad excesiva. Esto puede
causar cortocircuitos eléctricos, incendios u otros daños.
E
S
P
A
Ñ
O
L
Cuando esté estacionado
El estacionamiento a la luz solar directa puede producir
temperaturas muy altas en el interior de su vehículo.
Procure enfriar el interior antes de encender la unidad.
Uso de la alimentación apropiada
Este equipo ha sido diseñado para funcionar con un sistema de batería de 12 voltios con negativo a masa (el sistema normal en un vehículo norteamericano).
Uso de los centros de servicio autorizados
No intente desmontar ni ajustar este equipo de precisión.
Consulte la lista de centros de servicio incluidos con este
producto para acudir a ellos cuando sea necesario.
Contents
E
N
G
L
I
S
H
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Part 15 of the FCC Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Use this Product Safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
❒ Power and Sound Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
How to adjust the volume, mute, tone and balance
❒ Radio Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Manual and automatic tuning, band selection, preset stations
FM
❒ CD Player Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disc insert and playback, stop and eject, CD play, track selection, search,
repeat, random, scan and direct selection
Instalación
La unidad deberá instalarse en posición horizontal, con el
extremo delantero hacia arriba formando un ángulo conveniente, pero con no más de 30x.
❒ Clock Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting/resetting the time, selecting the clock display
❒ Remote Control Unit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Battery installation, battery notes, main controls (buttons of the remote
control function)
❒ Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Step-by-step procedures
❐ Componentes
≥ Manual de instrucciones.......................................... 1
≥ Accesorios suministrados ........1 juego (➡ página 58)
≥ Conector de alimentación ........................................ 1
≥ Unidad del controlador remoto................................ 1
≥ Pila de litio (CR2025) .............................................. 1
≥ Tarjeta de garantía .................................................. 1
❒ Anti-Theft System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Place the removable face plate into case, install removable face plate,
security indicator
❒ Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cautions and wiring diagram
❒ Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Where to get service help, troubleshooting tips, error display messages
❒ Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Care of the unit, notes on CD
❒ Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6
CQ-DF201U
CQ-DF201U
7
F
R
A
N
Ç
A
I
S
8
Table des matières
Índice
Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page13
Précautions à prendre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Éléments constitutifs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Información para su seguridad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Página13
Uso de este equipo con seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
❒ Commandes d’alimentation et de son . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Réglage du volume, coupure du son, tonalité et équilibre
❒ Controles de alimentación y sonido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Cómo ajustar el volumen, silenciamiento, tono y equilibrio
❒ Fonctionnement de base de la radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Syntonisation manuelle et automatique, sélection de la bande et stations en
mémoire
❒ Radio: Conceptos generales. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Sintoniá manual y automática, selección de banda y preajuste de emisoras
FM
FM
❒ Fonctionnement de base du lecteur CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Chargement/éjection du disque, lecture de CD, sélection des plages, repérage,
lecture en reprise, lecture aléatoire, balayage des plages et sélection directe
❒ Reproductor de CD: Conceptos generales . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Carga/expulsión de un disco, reproducción de CD, selección de pista, búsqueda,
repetición, selección aleatoria, exploración y selección directa
❒ Fonctionnement de base de l’horloge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Réglage de l’heure, remise à l’heure, sélection de l’affichage de l’horloge
❒ Reloj: Conceptos generales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Puesta inicial de la hora, reposición de la hora, selección de la pantalla del reloj
❒ Préparation de la télécommande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installation de la pile, remarques sur la pile, principales commandes (touches de
fonction de la télécommande)
❒ Preparación del controlador remoto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Instalación de la pila, notas sobre la pila, controles principales (botones de
funcionamiento del controlador remoto)
❒ Guide d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Marche à suivre
❒ Guía de instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Procedimientos paso a paso
❒ Système antivol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Mettre la plaque de façade amovible dans l’étui, installer la plaque de façade
amovible, voyant du système de sécurité
❒ Sistema antirrobo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Coloque la placa frontal removible en la caja, instale la placa frontal removible, el
indicador de seguridad
❒ Branchements électriques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Précautions et schéma
❒ Conexiones eléctricas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Medidas de precaución y diagrama
❒ En cas de difficulté . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Service après-vente, guide de dépannage, affichage des messages d’erreur
❒ Solución de problemas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Dónde obtener ayuda técnica, consejos sobre solución de problemas, mensajes de
error
❒ Entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Entretien de l’appareil, remarques relatives aux disques CD
❒ Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Cuidado del aparato, notas sobre los discos compactos
❒ Données techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
❒ Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
CQ-DF201U
E
S
P
A
Ñ
O
L
CQ-DF201U
9
E
N
G
L
I
S
H
Power and Sound Controls
Power
Volume
Audio Mode (Bass/Treble/Balance/Fader)
1
Turn the key in the ignition until the
accessory indicator lights.
Power on: Press [SOURCE] (PWR).
Power off: Press [SOURCE] (PWR)
again and hold.
[" VOL]: Up
[# VOL]: Down
Press and hold for rapid adjustment.
1
ACC
ON
2
Press [SEL] to select the audio mode.
Volume
Regular Mode
Bass
Treble
Fader
D
BAN
CQ-DF201U
Balance
Volume level
(0 to 40)
Note:
≥ When the power is switched on for the first
time, a demonstration message appears on
the display.
To cancel this display, press [DISP].
Note:
≥ If no operation takes place for more than 5 seconds in audio mode (2 seconds in volume mode),
the display return to the regular mode.
N
APM/SCA
45WX4 CD RECEIVER
BAN
CQ-DF201U
OPEN
bright display with level meters
E
N
G
L
I
S
H
D
N
APM/SCA
45WX4 CD RECEIVER
OPEN
bright display with level meters
LEVEL
LEVEL
VOL
VOL
TUNE
TRACK
CLOCK
DISP
TE
R E MO
L
SE
SOURC
E
MUTE
•
PWR
7
1
8
2
9
3
10
4
11
5
12
6
TUNE
TRACK
L
SE
REP
MONO/LOC
Mute
Loudness
Press [•] (MUTE) to mute the sound completely.
Press [LOUD] to enhance bass and treble
tones at low or medium volume.
DISP
TE
R E MO
RANDOM
LOUD
CLOCK
2
SOURC
E
MUTE
•
PWR
7
1
8
2
9
3
10
4
11
5
12
6
RANDOM
LOUD
REP
MONO/LOC
Press [" VOL] or [# VOL] to change each
level.
Bass mode:
MONO
MUTE
LOUD
Press [•] (MUTE) again to cancel.
Adjustable range: j12 dB to i12 dB
Press [LOUD] again to cancel.
Treble mode:
Level Meter
Adjustable range: j12 dB to i12 dB
When the power is on, the level of sound sources,
such as radio and CD, is displayed.
Press [LEVEL] to change the level meter display.
Balance mode:
R (right speaker) or L (left speaker)
(Default)
Anti-volume-blast circuit:
When the power is switched off and on again,
the volume slowly rises to the previous level.
The anti-volume-blast circuit will not work when
the volume level is set lower than position 20 on
the display.
Pattern 1
Pattern off
Pattern 2
Pattern 3
Pattern 4
Adjustable range: 1 to 15 Balance center
Fader mode:
F (front speaker ) or R (rear speaker)
Adjustable range: 1 to 15 Fader center
10
CQ-DF201U
CQ-DF201U
11
E
N
G
L
I
S
H
3
Radio Basics
Source
Radio
Selection
1 Mode
Press [SOURCE] to change to
Preset Station Setting
CD player
(When a CD is inserted.)
the radio mode.
Caution:
≥ To ensure safety, never attempt to preset stations while you are driving.
Up to 6 stations each can be saved in the FM1,
FM2, FM3 and AM preset station memories.
2 Band
Press [BAND] to change the band.
D
BAN
Press [BAND] to select a desired band.
(➡ page 12)
Preset number
N
APM/SCA
45WX4 CD RECEIVER
L
VOL
ST MONO
OPEN
bright display with level meters
LOCAL TAon AF ΙΙ PTY
RDS
EON
TP
R
D
N
APM/SCA
45WX4 CD RECEIVER
L
VOL
CLOCK
LOUD REP RAND
MUTE
BAN
CQ-DF201U
LEVEL
DISC
TUNE
TRACK
ST MONO
OPEN
bright display with level meters
LOCAL TAon AF ΙΙ PTY
RDS
EON
TP
R
LEVEL
DISC
TUNE
TRACK
MUTE
CLOCK
LOUD REP RAND
DISP
DISP
R E MO
L
SE
4
1 Band
FM stereo indicator
CQ-DF201U
E
N
G
L
I
S
H
SOURC
E
TE
MUTE
•
PWR
7
1
8
2
9
3
10
4
11
5
12
6
R E MO
RANDOM
LOUD
REP
SE
L
SOURC
E
MONO/LOC
Tuning
3 Manual
[" TUNE]: Higher frequency
MUTE
•
PWR
Press and hold [BAND] (APM) for more
than 2 seconds (auto preset memory).
≥ The 6 strongest available stations will be
automatically saved in the memory
under preset buttons [1] to [6].
≥ Once set, the preset stations are sequentially scanned for 5 seconds each.
Seek Tuning
Note:
≥ The stations manually preset on the selected band will be deleted.
FM broadcast:
Mono/Local Selection
4 MONO: Noise is significantly decreased when weak
ST MONO
LOCAL
signals are received from an FM broadcast
station.
LOCAL: Only strong signals of stations are searched
in seek tuning, while at the LOCAL OFF setting, relatively weak signals are also
searched.
FM broadcasts:
Press and hold [•] (MONO/LOC) to change the mode.
Release when at the desired point.
AM broadcasts:
Press and hold [•] (MONO/LOC) to switch LOCAL
mode on and off.
ST MONO
LOCAL
ST MONO
LOCAL
ST MONO
LOCAL
MONO OFF/
LOCAL OFF
MONO ON/
LOCAL OFF
MONO ON/
LOCAL ON
MONO OFF/
LOCAL ON
7
1
8
2
9
3
10
4
11
5
12
6
RANDOM
LOUD
REP
MONO/LOC
2 Auto Station Preset
[# TUNE]: Lower frequency
Press and hold ...
[" TUNE]: Higher frequency
[# TUNE]: Lower frequency
Tuning will automatically stop when
the signals of the next broadcast
station are received.
TE
3 Tuning in a Preset
Station
Press the corresponding preset button
[1] to [6] to tune in a preset station.
Note:
≥ You can change the memory presetting by repeating the above procedure.
Manual Station Preset
1 Use manual or seek tuning to find a
station. (➡ page 12)
2 Press and hold one of the preset buttons [1] to [6] until the display blinks
once.
AM broadcast:
ST MONO
LOCAL
LOCAL OFF
ST MONO
LOCAL
LOCAL ON
12
CQ-DF201U
CQ-DF201U
13
E
N
G
L
I
S
H
CD Player Basics
Disc Insert and Playback
Lights when the disc is loaded.
5
Open the front panel
1 Press [OPEN] to open the front panel.
OPEN
bright display with level meters
R
LEVEL
DISC
E
N
G
L
I
S
H
Cautions:
≥ Only 12 cm CD is available for this unit.
≥ This unit is not designed for any 8 cm CD.
≥ If you insert an 8 cm CD and can not eject it, turn ACC of your
car off once and turn it on again, then press [<] (EJECT).
6
CLOCK
DISP
insert
2 Disc
Close the front panel manually.
Label side
< (EJECT)
Playback will start automatically.
Stop and Disc Eject
Press [<] (EJECT) to stop CD play and eject the
disc.
Close
Press [SOURCE] to change to CD play mode.
Listening to a CD
D
BAN
CQ-DF201U
45WX4 CD RECEIVER
Press and hold ...
[5TRACK]: Fast forward
[6TRACK]: Fast backward
Release to resume the regular CD play.
Lights when the disc is
loaded.
R
BAN
CQ-DF201U
CLOCK
MUTE
•
PWR
7
1
8
2
9
3
10
4
11
5
12
6
N
APM/SCA
CLOCK
DISP
R E MO
TE
L
SE
REP
MONO/LOC
SOURC
E
MUTE
•
PWR
7
1
8
2
9
3
10
4
11
5
Mode Selection
Display Change
Press [SOURCE] to change to the CD play mode.
Press [DISP] to switch to the clock display.
CD player
(When a CD is inserted.)
Track number/
Track playing time
Track random play
Track repeat play
CQ-DF201U
LOUD
REP
Random play
Repeat play
≥ Press and hold [REP] (RANDOM) for more
than 2 seconds.
All the tracks are played in random order.
≥ Press and hold [REP] (RANDOM) again to
cancel.
DISC
RAND
Clock display
Track scan play
14
12
6
RANDOM
MONO/LOC
Scan play
Source
Radio
OPEN
bright display with level meters
TUNE
TRACK
RANDOM
LOUD
45WX4 CD RECEIVER
LEVEL
VOL
DISP
TE
D
LEVEL
DISC
R E MO
SOURC
E
OPEN
bright display with level meters
TUNE
TRACK
L
SE
≥ Press a track number button from [1] to [6].
The corresponding track starts playing.
≥ Press and hold a track number button from [7] to
[12] ([1] to [6]) for more than 1 second.
The corresponding track starts playing.
N
APM/SCA
L
VOL
Direct Track Selection
[5TRACK]: Advance to the next track.
[6TRACK]: Back to beginning of the current track.
Back to previous track. (Press
twice.)
Track Search
When CD is in the player
<CD player display>
Track number
Track playing time
Track Selection
≥ Press [BAND] (SCAN).
The first 10 seconds of each track on the
disc are played in sequence.
≥ Press [BAND] (SCAN) again to cancel.
≥ Press [REP].
The current track is repeated.
≥ Press [REP] again to cancel.
DISC
DISC
REP
CQ-DF201U
15
E
N
G
L
I
S
H
Clock Basics
Remote Control Unit Preparation
The 12-hour system is used for the clock.
Battery Installation
7
D
BAN
CQ-DF201U
N
APM/SCA
45WX4 CD RECEIVER
OPEN
bright display with level meters
LEVEL
VOL
TUNE
TRACK
CLOCK
DISP
T
R E MO
L
SE
SOURC
E
E
MUTE
•
PWR
7
1
8
2
9
3
10
4
11
5
12
6
RANDOM
LOUD
REP
MONO/LOC
1 Remove the battery holder.
Pull the holder by the position B while pushing position A in the direction indicated by the arrow.
2 Install the battery on the battery holder.
Set a new battery properly with its (i) side facing up
as shown in the figure.
3 Insert the battery holder.
Push in the battery holder back into its original position.
Battery Notes
Initial Time
Clock Display
1 Press [DISP] (CLOCK).
Press [DISP] (CLOCK) to switch to the clock display.
In tuner mode:
Hours
2 Press and hold [DISP] (CLOCK).
(Hour blinks.)
3 Press [# TUNE] or [" TUNE].
(Hour sets.)
Minutes
4 Press [DISP] (CLOCK).
(Minutes blink.)
Broadcast station
Clock display
In CD player mode:
Playing time
Clock display
When the power is off:
Clock display
Lithium battery
(included)
E
N
G
L
I
S
H
8
Back side
Position B
Battery holder
Position A
Remove and dispose of an old battery immediately.
Battery Information:
≥ Battery type: Panasonic lithium battery (CR2025)
(included)
≥ Battery life: Approximately 6 months with normal use
(at room temperature)
Caution:
≥ Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.
Battery leakage may damage the unit.
≥ Do not disassemble or short the battery. Do not throw a battery into a fire.
≥ Keep batteries away from children to avoid the risk of accidents.
≥ Be careful to the local disposal rules when you dispose of batteries.
Main Controls
Buttons of the remote control function in the same way as the controls on the
main unit of the reference page.
No display
5 Press [# TUNE] or [" TUNE].
(Minutes set.)
6 Press [DISP] (CLOCK).
(End.)
Note:
≥ Press and hold [# TUNE] or [" TUNE] to
change numbers rapidly.
Note:
≥ The [DISP] (CLOCK) button will not work while
the CD player is set to the scan play mode.
Cancel the scan play mode before pressing
[DISP] (CLOCK).
(ATT)
Power button
(➡ page 10)
PWR
MODE button
(➡ pages 12, 14)
MUTE
MUTE button
(➡ page 10)
VOL
Volume control buttons
(➡ page 10)
MODE
Time Reset
Press and hold [DISP] (CLOCK) for more than
2 seconds to activate the time setting mode to reset
the time.
Then, repeat steps 3 to 6.
BAND button
(➡ page 12)
PRG
BAND/DISC UP
TUNE
TRACK
TUNE/ TRACK buttons
(➡ pages 12, 15)
Car Audio
16
CQ-DF201U
CQ-DF201U
17
E
N
G
L
I
S
H
Installation Guide
❐ Identify All Leads
WARNING
9
This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than qualified installer could cause damage to the electrical system and could result in serious personal injury or death.
❐ Installation Hardware
If you encounter problems, please consult your
nearest professional installer.
No.
Item
Diagram
Q’ty
1
Mounting collar
1
2
Hex. nut (5 mm·)
1
3
Rear support strap
1
4
Tapping screw
(5 mm·a16 mm)
1
5
Mounting bolt (5 mm·)
1
6
Power connector
1
7
Removable face plate case
1
8
Trim plate
1
Caution: This unit operates with a 12 volt DC negative ground auto battery system only. Do not attempt to use it in any other system. Doing so could
cause serious damage.
≥ Identify and label the car wires.
≥ Connect the car wires to the wires of the power
connector.
≥ Install the unit in the dashboard.
≥ Check the operation of the unit.
18
CQ-DF201U
Note: Do not connect the power connector to the
stereo unit until you have made all connections. If
there are no plastic caps on the stereo hooking
wires, insulate all exposed leads with electrical tape
until you are ready to use them. Identify the leads
in the following order.
Power Lead
If your car has a radio or is pre-wired for one:
Cut the connector wires one at a time from the plug
(leaving the leads as long as possible) so that you
can work with individual leads.
Before you begin installation, look for the items
which are packed with your unit.
≥ Warranty Card…Fill this out promptly.
≥ Panasonic Servicenter for Service Directory
…Keep for future reference in case the product
needs servicing.
≥ Installation Hardware…Needed for in-dash installation.
❐ Required Tools
You’ll need a screwdriver, a 1.5 volt AA battery, and
the following:
12 V DC
Electrical
Side-cut
Test bulb
tape
pliers
❐ Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please refer to the “WARNING” statement
above.)
The first step in installation is to identify all the car
wires you’ll use when hooking up your sound system.
As you identify each wire, we suggest that you label
it using masking tape and a permanent marker.
This will help avoid confusion when making connections later.
Turn the ignition on to the accessory position, and
ground one lead of the test bulb to the chassis.
Touch the other lead of the test bulb to each of the
exposed wires from the cut radio connector plug.
Touch one wire at a time until you find the outlet
that causes the test bulb to light.
Now turn the ignition off and then on. If the bulb
also turns off and on, that outlet is the car power
lead.
If your car is not wired for an audio unit:
Go to the fuse block and find the fuse port for radio
(RADIO), accessory (ACC), or ignition (IGN).
❐ Dashboard Specifications
Thickness
Min. 3⁄16z (4.75 mm)
Max. 7⁄32z (5.56 mm)
23⁄32z (53 mm)
75⁄32z (182 mm)
Battery Lead
If your stereo unit has a yellow lead, you will need
to locate the car’s battery lead. Otherwise you may
ignore this procedure. (The yellow battery lead provides continuous power to maintain a clock, memory storage, or other function.)
If your car has a radio or is pre-wired for one:
With the ignition and headlights off, identify the car
battery lead by grounding one lead of the test bulb
to the chassis and checking the remaining exposed
wires from the cut radio connector plug.
E
N
G
L
I
S
H
10
f your car is not wired for an audio unit:
Go to the fuse block and find the fuse port for the
battery, usually marked BAT.
Speakers
Identify the car speaker leads. There are two leads
for each speaker which are usually color coded.
A handy way to identify the speaker leads and the
speaker they are connected with is to test the leads
using a 1.5 volt AA battery as follows.
Hold one lead against one pole of the battery and
stroke the other lead across the other pole. You will
hear a scraping sound in one of the speakers if you
are holding a speaker lead.
If not, keep testing different lead combinations until
you have located all the speaker leads. When you
label them, include the speaker location for each.
Antenna Motor
If your car is equipped with an automatic power antenna, identify the car motor antenna lead by connecting one bulb tester lead to the car battery lead
and touching the remaining exposed wires from the
cut radio connector plug one at a time. You will
hear the antenna motor activate when you touch
the correct wire.
Antenna
The antenna lead is a thick, black wire with a metal
plug at the end.
❐ Connect All Leads
Now that you have identified all the wires in the car,
you are ready to begin connecting them to the
stereo unit wires. The wiring diagram (➡ page 24)
shows the proper connections and color coding of
the leads.
We strongly recommend that you test the unit before making a final installation.
You can set the unit on the floor and make temporary connections to test the unit. Use electrical tape
to cover all exposed wires.
Important: Connect the red power lead last, after
you have made and insulated all other connections.
Ground
Connect the black ground lead of the power connector to the metal car chassis.
CQ-DF201U
19
E
N
G
L
I
S
H
11
Installation Guide (Continued)
Speakers
Connect the speaker wires. See the connection diagram (➡ page 24) for the proper hookups. Follow
the diagram carefully to avoid damaging the speakers and the stereo unit.
The speakers used must be able to handle more
than 45 watts of audio power. If using an optional
audio amplifier, the speakers should be able to handle the maximum amplifier output power. Speakers
with low input ratings can be damaged. Speaker
impedance should measure 4–8 ohms, which is
typically marked on most speakers. Lower or higher impedance speakers will affect output and can
cause both speaker and stereo unit damage.
Motor Antenna
Connect the car motor antenna lead to the dark
blue motor antenna relay control lead.
Battery
Connect the yellow battery lead to the correct radio
wire or to the battery fuse port on the fuse block.
Antenna
Connect the antenna by plugging the antenna lead
into the antenna receptacle.
Equipment
Connect any optional equipment such as an amplifier, according to the instructions furnished with
the equipment. Leave about 12 inches (30 cm) of
distance between the speaker leads/amplifier unit
and the antenna/antenna extension cord. Read the
operating and installation instructions of any equipment you will connect to this unit.
Power
Connect the red power lead to the correct car radio
wire or to the appropriate fuse port on the fuse
block.
If the stereo unit functions properly with all these
connections made, disconnect the wires and proceed to the final installation.
❐ Final Installation
Lead Connections
Connect all wires, making sure that each connection is insulated and secure. Bundle all loose wires
and fasten them with tape so they will not fall down
later. Now insert the stereo unit into the mounting
collar.
Congratulations! After making a few final checks,
you’re ready to enjoy your new auto stereo system.
20
CQ-DF201U
E
N
G
L
I
S
H
❐ Final Checks
❐ Installation Procedures
1. Make sure that all wires are properly connected
and insulated.
2. Make sure that the stereo unit is securely held in
the mounting collar.
3. Turn on the ignition to check the unit for proper
operation.
First complete the electrical connections, and
then check them for correctness. (➡ page 24)
mounting collar 1 into the dashboard, and
1 Insert
bend the mounting tabs out with a screwdriver.
12
If you have difficulties, consult your nearest authorized professional installer for assistance.
❐ Preparation
≥ We strongly recommend that you wear gloves
for installation work to protect yourself from
injuries.
≥ When bending the mounting tabs of the
mounting collar with a screwdriver, be careful
not to injure your hands and fingers.
Lock lever (§)
6 Power connector
Mounting tabs
5 Mounting bolt
≥ Disconnect the cable from the negative - battery
terminal (see cautions below).
≥ Unit should be installed in a horizontal position
with the front end up at a convenient angle, but
not more than 30o.
Less than 30x
Caution:
≥ Do not disconnect the battery terminals of a
car with a trip or navigational computer since
all user settings stored in memory will be lost.
Instead take extra care with installing the unit
to prevent shorts.
the rear of the unit.
2 Secure
After fixing mounting bolt 5 and power connector
6, fix the rear of the unit to the car body by either
method (a) or (b) shown below.
3 Insert trim plate 8.
installation, reconnect
4 After
battery terminal.
Make sure that the lock
lever (§) is flush with the
mounting collar 1 (not
projecting outward).
Lock lever
(a) Using the rear support strap 3
Fire wall of car
Dashboard Installation
Installation Opening
4 Tapping screw
23/32q
(53 mm)
75/32q
(182 mm)
This unit can be installed in any dashboard having
an opening as shown above. The dashboard should
be 3⁄16z (4.75mm)j7⁄32z (5.56 mm) thick in order to
be able to support the unit.
the negative -
3 mm·
(b) Using the rubber cushion (option)
Rear support bracket
Rubber cushion (option) (provided on the car)
2 Hex. nut
3 Rear support
strap
5 Mounting bolt
1 Mounting collar
5 Mounting bolt
1 Mounting collar
CQ-DF201U
21
E
N
G
L
I
S
H
Installation Guide (Continued)
Anti-Theft System
Remove the Unit
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
The security indicator will blink.
13
Switch off the power of the unit.
Place the Removable Face
Plate into Case
the removable face plate.
1 Remove
1 Press [OPEN]. The removable face plate will
be opened.
vel meters
Main unit
1 Open
Contact
OPEN
2 Push
LEVEL
CLOCK
3 Pull out
E
N
G
L
I
S
H
14
7 Removable face plate case
1 Switch off the power of the unit.
2 Remove the removable face plate. (➡ page 22)
3 Gently press the button of the case and open
the cover. Place the face plate into the case and
take it with you when you leave the car.
2 Push the face plate to either the right or left,
then pull it out toward you.
Install Removable Face Plate
2
Remove the trim plate 8 with a screwdriver.
8 Trim plate
Screwdriver
1
2
out the unit while pushing down the lock
3 Pull
lever with a screwdriver.
Lock lever
1 Fit the face plate with its right or left hole on
one of the pins provided on the main unit.
2 Fit the other hold on the other pin applying
slight pressure.
3 Move the face plate up and down a few times to
make sure it is secure. Then close the front
panel and press down the right side of the face
plate until it clicks into plate.
Contact
2
3
1
Security Indicator
The security indicator blinks when the removable
face plate is removed from the unit.
Press and hold [SEL] to turn the security indicator
on or off. (“LED ON” or “LED OFF”)
Default
Display
Security indicator
Security indicator
Blinks
Lock lever
4
22
Remove the unit pulling with both hands.
CQ-DF201U
OFF
Cautions:
≥ This face plate is not water-proof. Do not expose it to water or excessive moisture.
≥ Do not remove the face plate while driving your car.
≥ Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
≥ Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.
≥ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
≥ Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or
it might be damaged.
CQ-DF201U
23
E
N
G
L
I
S
H
15
Electrical Connections
Troubleshooting
Cautions:
≥ This product is designed to operate of a 12 volt, negative ground battery system.
≥ To prevent damage to the unit, be sure to follow the connection diagram below.
≥ Remove approx. 1⁄4z (5 mm) of protective covering from the ends of the leads before connecting.
≥ Do not insert the power connector into the unit until the wiring is completed.
≥ Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
and keep cable terminals free from touching any metal parts.
≥ Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch power off.
Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs.
Never try to repair the unit yourself because it is dangerous to
do so.
Cautions:
≥ Do not use the unit if it malfunctions or
is something wrong.
≥ Do not use the unit in abnormal condition, for example, without sound, or
with smoke or foul smell, can cause ignition or electric shock. Immediately
stop using it and call the store where
you purchased it.
E
N
G
L
I
S
H
16
Troubleshooting Tips
Supplied hardware
No.
Item
Q’ty
6
Power connector
1
❐ Common
Trouble
Car’s engine switch is not on.
➡Turn your car’s ignition switch to ACC or ON.
❐ Wiring Diagram
Cables are not correctly connected.
➡Connect cables correctly.
Preamp out connector (front)
Preamp out connector (rear)
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always live.
L (White)
R (Red)
No power.
Antenna
6 Power connector
Ground lead
To a clean, bare metallic part of car chassis.
Motor antenna
relay control
Moves antenna up and down.
Gray/black stripe
Black
(s)
(r)
Speaker lead
Gray
(s)
Resistor (1 k≠)
Fuse is burnt.
➡Call the store where you purchased the unit, or your nearest service
station (see the attached sheet) and ask for fuse replacement.
Power lead
To ACC power,
+12 V DC
Mute is set to ON.
➡Set it to OFF.
Dark blue
FRONT SP
White
ACC
Red
(r)
Violet/black stripe
REAR SP
Green/black
stripe
(s)
Green
(r)
No sound.
Violet
(s)
Accessory cable is not correctly connected.
➡Connect the accessory cable to your car’s ACC source.
Grounding wire is not correctly connected.
➡Connect the grounding wire to a metal part of the car.
Battery lead
To the car battery,
continuous +12 V DC
BATTERY 15A
Fuse (15 A)
Yellow
White/black stripe
Cause/Step
Cables are not correctly connected.
➡Connect cables correctly.
Condensation (dew)
➡Wait for a while before use.
(r)
❐ Radio
Trouble
Left speaker
(Front)
24
CQ-DF201U
Right speaker
(Front)
Left speaker
(Rear)
Right speaker
(Rear)
Cause/Step
Much noise in FM stereo
and monaural broadcasts.
Station is too far, or signals are too weak.
➡Select other stations of higher signal level.
Preset station is reset.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always live.
CQ-DF201U
25
E
N
G
L
I
S
H
17
Troubleshooting (Continued)
❐ CD
E
N
G
L
I
S
H
❐ Remote Control
Trouble
Cause/Step
CD is inside but no
sound.
CD sound skips, tone
quality is low.
Sound skips due to vibration.
CD is upside down.
➡Place CD in the correct direction, and the label side up.
CD is dirty.
➡Clean CD, referring to the section on “Notes on CD”.
CD is dirty.
➡Clean CD, referring to the section on “Notes on CD”.
Instable mounting.
➡Mount the unit securely with the mounting parts, referring to the
section on installation.
Buttons are invalid for
operation.
No sound from
right, front or
speakers.
Remote control is in the wrong direction.
➡Direct the remote control at sensor (REMOTE) on the panel.
Error Display Messages
❐ CD
Display
Disc has scars.
➡Press [OPEN] to open the front panel, and then press [<] (EJECT) to
eject the disc.
Left and right sounds are
reversed in stereo listening.
No operation by some cause.
➡Turn off the car engine (ACC off) and remove the fuse from the battery lead (yellow) for 1 minute. Then reinstall the fuse.
Left and right balance, or front and rear balance is off on one side.
➡Adjust balance/fader mode as appropriate.
Cables are not correctly connected.
➡Connect the cables correctly.
The right speaker wire is connected to the left speaker and the left speaker wire to the right speaker.
➡Connect the speaker wires to the correct ones.
Cause/Step
Disc is dirty, or is upside down.
➡Press [OPEN] to open the front panel, and then press [<] (EJECT) to
eject the disc.
Cause/Step
left,
rear
Wrong batteries.
➡Check the batteries.
Batteries have run down.
➡Replace the batteries.
❐ Sound Setting
Trouble
18
Cause/Step
Battery polarities (i) (j) are reversed.
➡Insert the batteries correctly.
Mounting angle is over 30o.
➡Adjust mounting angle to less than 30o.
≥ CD is defective.
≥ Mechanical trouble.
➡Press [OPEN] to open the panel and press [<] (EJECT). If normal
operation is not restored yet, call the store where you purchased the
unit or the nearest service station to ask for repairs.
CD is not ejected.
Trouble
Maintenance
Your product is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician.
Replace the Fuse
Use fuses of the same specified rating (15 amps). Using different substitutes or fuses with higher ratings, or
connecting the product directly without a fuse, could cause fire or damage to the stereo unit.
If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.
26
CQ-DF201U
CQ-DF201U
27
E
N
G
L
I
S
H
Maintenance
Specifications
Care of the Unit
❐ General
19
❐ Cleaning this Unit
❐ Caution on Cleaning
Use a dry, soft cloth to wipe.
Never use solvents such as benzine, thinner as they
may mar the surface of the unit.
Notes on CD
Power supply:
Current consumption:
Maximum power output:
Tone adjustment range:
Bass:
Treble:
Suitable speaker impedance:
Pre-Amp output voltage:
Output impedance:
Dimensions (WaHaD):
Weight:
E
N
G
L
I
S
H
12 V DC (11 Vj16 V), test voltage 14.4 V, negative ground
Less than 2.2 A (CD play mode; 0.5 Wa4 channels)
45 Wa4 channels at 400 Hz, Volume control maximum
20
n12 dB at 100 Hz
n12 dB at 10 kHz
4j8 ≠
2.0 V (CD play mode; 1 kHz, 0 dB)
200 ≠
7za115/16 za57/8 z (178a50a150 mm)
3 lbs. 1 oz (1.4 kg)
ONLY USE DISCS CARRYING THE LABEL.
❐ FM Stereo Radio
How to hold the CD
≥ Do not touch the underside of the disc.
≥ Do not make scratches on the discs.
≥ Do not bend disc.
≥ When not in use, keep CD in the case.
Frequency range:
Usable sensitivity:
50 dB quieting sensitivity:
Frequency response:
Alternate channel selectivity:
Stereo separation:
Image response ratio:
IF response ratio:
Signal/noise ratio:
Label side
Do not use irregular shaped CDs.
87.9 MHzj107.9 MHz
11.0 dBf. (1.25 ¨V, 75 ≠)
15.2 dBf. (1.6 ¨V, 75 ≠)
30 Hzj15 kHz (n3 dB)
75 dB
42 dB (1 kHz)
75 dB
100 dB
70 dB
❐ AM Radio
Do not leave discs on the following places:
≥ Direct sunlight
≥ Near car heaters
≥ Dirty, dusty and damp areas
≥ Seats and dashboards
Do not use irregular shaped CDs.
530 kHzj1710 kHz
28 dB/¨V (25 ¨V, S/N 20 dB)
❐ CD Player
<Right>
Disc cleaning
Use a dry, soft cloth to wipe from the center outward.
Caution on new discs
A new disc may have rough edges on its inner and outer
perimeter. These may cause malfunction.
Remove the rough edges using a pencil, etc.
Frequency range:
Usable sensitivity:
Rough edge
<Wrong>
Sampling frequency:
DA converter:
Error correction system:
Pick-up type:
Light source:
Wave length:
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Wow and flutter:
Channel separation:
32 times oversampling
MASH • 1 bit/4 DAC system
Panasonic super decoding algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 Hzj20 kHz (n1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
Above specifications comply with EIA standards.
Rough edge
28
CQ-DF201U
Note:
≥ Specifications and the design are subject to modification without notice due to improvements in technology.
CQ-DF201U
29
Memorandum
70
CQ-DF201U
CQ-DF201U
71
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company.
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
YEFM283646
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
http://www.panasonic.ca
F1000-1110
Printed in China
Imprimé en Chine
Impreso en China
Download PDF

advertising