Cypress | CX-5100AH | CX-5100AH - CYP Converters

CX-5100AH
HDMI with Audio Amplifier
Operation Manual
CX-5100AH
Revision History
Revision
Date
V1
20080926
Summary of Change
Preliminary Release
Precaution
Failure to follow the precautions described below may cause damage to
Digital HDMI AV Receiver and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage Digital HDMI AV Receiver.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the case as they may
damage Digital HDMI AV Receiver.
Table of Contents
1.
Introduction…………………………………………................................ 1
2.
Application.............................…………………………………………… 1
3.
Contents.............................………………………………………………. 1
4.
System Require............................……………………………………….. 2
Features.............................……………………………………………….. 2
5.
6.
7.
8.
9.
Installation............................…………………………………………….. 3
Front View.............................…………………………………………….. 4
Remote Control...........................……………………………………….. 5
LCM Operation.............................………………………………………. 6
9.1 LCM Menu 1.................................................................................... 6
9.2 LCM Menu 2.................................................................................... 7
9.3 LCM Operation Table.................................................................... 8
10. Audio Input & Output Diagrm............................................................. 8
11. Audio Output Format Table................................................................ 9
12. Specification........................................................................................ 11
1. Introduction
Thank you for purchasing Digital HDMI AV Receiver with Audio Amplifier.
When HDMI products fill out the market speedily, many follow devices are
still yet catching up. How to enjoy a full HDMI solution with limited cost and
space is the most urgent request now in the market. How to display a total
solution HDMI AV on your HDMI TV that is with limited HDMI sound solution is
the key to enjoy your true HDMI AV.
Digital HDMI AV Receiver is the most advanced solution for HDMI Audio
Amplifier. Digital HDMI AV Receiver supports not only 3 (three) HDMI input
and 2 (two) HDMI output but also, Analog / Digital audio input/output.
Digital HDMI AV Receiver allows you to enjoy theater standard sounds with
less cost and space. Digital HDMI AV Receiver designs friendly use remote
control with entry level set up for your enjoyment of free space entertainment
environment. Digital HDMI AV Receiver makes your HDMI AV world ever the
best.
Please follow this manual to begin enjoying the benefit of your true HDMI AV.
We suggest keeping it in a safe place for future reference.
2. Application
 Home theater entertainment.
 Bridge between your audio devices and video devices.
 Enlarge sounds from stereo in TV to surround 5.1CH HDMI AV.
 Transforms analog sounds into digital sounds.
 Combination usage of Digital (Optical / Coaxial) & HDMI input Digital
(Optical / Coaxial) & HDMI output ports.
3. Contents
 Digital HDMI AV Receiver
 Power Adaptor
 Power Cord
 Remote Control RC36 (battery included)
 User Manual
1
4. System Requirements
Front LR/Rear LR/Center/Subwoofer speakers, Amplifier, Optical / Coaxial
cables, DVD player, HDMI/LCD TV and other audio equipment(s).
5. Features
 Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
 Full HD 1080p supported.
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480p to 1080p. Maximum resolution bandwidth is 165MHz.
 Built-in HDMI EDID simulator and HDCP keyset allows each output to work
independently in connecting to a HDMI display.
 7 Digital (Optical / Coaxial) input port and 4 Digital (Optical / Coaxial)
output port.




Lip Sync delay (up to 480ms can be split up to 3 channels).
8Ω speaker will produce sounds up to 9Wx 6 / 54W.
Easy to install and simple to operate.
Elegant design with thermal dispensation.
2
6. Installation
Follow the step-by-step instruction below to install your Digital HDMI AV
Receiver
Get familiar with the housing and connections of your new Digital HDMI AV
Receiver.
6
8
DIGITAL
IN
5.1CH AMP
OUTPUT
FRONT
R/Rt
L/Lt
L
REAR
R
CENTER
SUBWOOFER
OPTICAL
HDMI INPUT
DIGITAL
OUT
COAXIAL
1
HDMI OUT
2
3
1
(TOTAL)
1
2
1
2
OPTICAL COAXIAL
CENTER
L
2
R
1
2
3
ANALOG INPUT
1
2
3
4 5
7
4
FRONT
REAR
SUB
5.1CH OUTPUT
9
10
1
5.1CH AMP out: Connect the Front LR /Rear LR /Center/Subwoofer to the
Amplifier.
2 Optical 1~2 in: Connect the Optical input ports 1~2 to the Optical output
port of your source equipments.
3 Coaxial 1~2 in: Connect the Coaxial input ports 1~2 to the Coaxial output
port of your source equipments.
4 Optical out: Connect the Optical output port to the input port of your audio
equipment.
5 Coaxial out: Connect the Coaxial output port to the input port of your audio
equipment.
6 HDMI 1~3 in: Connect the HDMI 1 ~ 3 input ports to the HDMI output port of
your source equipments.
7 Analog audio in: There are four L/R input connectors; it can connect to four
different stereo audio sources.
8 HDMI out: Connect the HDMI 1 ~ 2 output ports to the HDMI input port of
your display or Amplifier.
9 5.1 CH out: Connect the Front LR/Rear LR/Center/Subwoofer to Multi CH
input.
10 Power: Plug the 18VDC power supply into the unit and connect the adaptor
to AC wall outlet.
Note:
a. A bitstream format sounds including AC-3 & DTS and others will not be
displayable hence, optical, coaxial & 6 RCA will output no sounds and the
LCM will show NONPCM. Digital HDMI AV Receiver is not supporting bit
steam sounds.
b. Coaxial / Optical / HDMI Audio Sample Rate: 48KHZ
3
7. Front View
Power
1
1
2
3
4
5
6
7
8
2
3
Home
Video In
Audio In
Menu


4
5
6
VOLUME
+
-
7
8
Power indicator: When power on, the LED will indicate in Green color.
When power off, the LED will indicate in Red color.
Power switch: Turn the system ON/OFF.
IR sensor.
Home menu: Press the button to enter the LCM menu selection. For the
LCM menu selections please refer to “section 9 LCM Operation”.
Video in: Press [Video in ▲] switch between different input video sources
(HDMI 1, HDMI 2, HDMI 3).
Audio in: Press [Audio in ▼] switch between different input audio sources
(Optical 1, Optical 2, Coaxial 1, Coaxial 2, L/R 1, L/R 2, L/R 3, L/R 4,
HDMI_2ch or HDMI_Mch). By choosing HDMI_2ch & HDMI_Mch the output
source will depend on HDMI input 1~3 single input’s original signal only.
Please refer to “section 10 LCM Operation”.
Volume -/+: Press [-] / [+] to adjust the volume up/down.
LCM display.
4
8. Remote Control
1. Power: Press to turn ON/OFF the system. When
power on the LED will indicate in Green color,
when power off the LED will indicate in Red
3
color.
2. Mute: Press to mute the audio, press again to
turn ON the audio.
3. HDMI in: Select the desire HDMI input source
from 1~3.
4. Audio in: Select the desire audio input source
(OPT1, OPT2, COAX1, COAX2).
5. Analog audio in: Select the desire stereo
analog input source from 1~4.
6. HDMI LPCM: <MULTI CH> for 5.1 CH output.
<2CH> for 2CH L/R output.
6
7. -/+: Press [-] / [+] to adjust the volume,
Press [-]: to decrease the volume, minimum
level to +0
Press [+]: to increase the volume, maximum
8
level to +64
8. Menu/▲/▼/←/→:
Press to enter the LCM menu and sub-menu.
From sub-menu press [▲/▼/←/→] to adjust
Bass /Treble /Loudness /LipSync LR, C and
default setting.
5
POWER
1
HDMI IN
1
2
3
MUTE
2
DIGITAL AUDIO IN
OPT1
OPT2
COAX1 COAX2
4
ANALOG AUDIO IN
1
2
3
4
5
7
MULTI CH 2CH
HDMI LPCM
VOLUME
MENU
CR-36
V:HDMI_3
A:Opt_1 L:+16
V:HDMI_2
A:Opt_1 L:+16
V:HDMI_1
A:Opt_1 L:+16
↓
↓
V:HDMI_1
A:Opt_2 L:+16
↓
↓
V:HDMI_1
A:Coax_1
V:HDMI_1
A:Coax_2
L:+16
V:HDMI_1
A:LR_1
L:+16
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
6
↓
↓
↓
Default On
>Press MENU Exit
↓
↓
Wait... ↓
Load Default
Wait…
Main menu
V:HDMI_1
Start Menu Display
A:Opt_1
↓ ( Manual )
L:16
Factory Setting - OFF Factory Setting - ON
↓( Manual )
Default +00
Default +00
LipSync C +16
>Press MENU Exit
↓
Default Off
>Press MENU Exit
9. Factory setting
Default +00
LipSync LR +16
>Press MENU Exit
↓
LipSync C +00
>Press MENU Exit
8. LipSync Center
Default +00
Loudness +16
>Press MENU Exit
↓
LipSync LR +00
>Press MENU Exit
7. LipSync LR
Default +00
↓
Loudness +00
>Press MENU Exit
6. Loudness Adjustment
Treble +12
>Press MENU Exit
↓
Treble -12
>Press MENU Exit
5. Treble Adjustment
Default +00
Bass +12
>Press MENU Exit
↓
Bass -12
>Press MENU Exit
4. Bass Adjustment
Default +16
V:HDMI_1
A:Opt_1 L:+64
↓
V:HDMI_1
A:Opt_1 L:+00
↓
L/R 3 input
V:HDMI_1
A:Opt_1 L:+16
L/R 4 input
↓
V:HDMI_1
A:HDMI L:+16
HDMI input
MENU:Switch between Main Manual or Sub-Manual or Confirm the selection.
←→ :Press ←→to move the cursor or adjust the value.
↓↑ :Press ↓↑to move the cursor.
Operation instruction:
V:HDMI_1
A:LR_3
L:+16
↓
L/R 2 input
↓
↓
3. Volume Adjustment
V:HDMI_1
A:LR_2
L:+16
↓
↓
Optical 1 input Optical 2 input Coaxial 1 input Coaxial 2 input L/R 1 input
V:HDMI_1
A:Opt_1 L:+16
2. Audio input selection
↓
L:+16
HDMI 3 input
HDMI 2 input
HDMI 1 input
9.1 LCM Menu
1. Video input selection
9. LCM Operation
↓
7
Wait
Default
LipSync C
LipSync LR
Loudness
Treble
Sub Menu Bass
Volume
Audio In
Main MenuVideo In
9.2 LCM Menu 1
H
s
r
1
a
0
B
υ P
H
r
r
r
r
r
a
i
o
W a
L
f
e
υ P
D
p
i
υ P
L
p
i
υ P
L
u
o
υ P
L
e
r
υ P
2
t
t
t
d
e
a
e
S
e
S
e
d
e
b
e
s
3
.
s
u
s
y
s
y
s
n
s
l
s
4
t
D M
O p
:
4
D M
O p
:
T
3
D M
O p
A
:
2
H
V
:
:
A
A
:
V
1
0
V
6
6
1
έ
1
έ
1
έ
.
D
s
l
s
n
s
n
s
e
s
e
s
.
e
t
c
c
s
Ё 1 2
5
έ
I
έ
I
_
I
5
E
8
8
f
M
M
M
M
s
M
a
E
O
E
C
E
L
E
E
Ё 1 2
M
7
1
1
1
7
u
N
f
N
N
R
N
: Ѐ 1 6
: Ѐ 1 6
: Ѐ 1 6
U
U
E x
Ѐ 0 0
E x
l
U
f
U
t
E x
E x
Ѐ 0 0
U
U
E x
E x
i
i
i
i
i
i
t
t
t
t
t
t
A B C D E F
L
L
L
A B C D E F
Ѐ 0 0
N
N
9
9
0
1
a
r
o
i
i
e
υ P
D
υ P
L
υ P
L
υ P
L
υ P
T
υ P
B
r
f
r
p
r
p
r
u
r
e
r
s
2
e
a
e
S
e
S
e
d
e
b
e
s
3
s
u
s
y
s
y
s
n
s
l
s
4
5
6
s
l
s
n
s
n
s
e
s
e
s
t
c
c
s
Ѐ 1 2
E
8
M
M
M
M
s
M
E
O
E
C
E
L
E
E
Ѐ 1 2
M
7
U
U
N
n
N
N
R
N
E x
Ѐ 1 6
E x
U
U
E x
E x
Ѐ 1 6
U
U
E x
E x
i
i
i
i
i
i
t
t
t
t
t
t
A B C D E F
Ѐ 1 6
N
N
9
9.3 LCM Operation table
Function
Level
Suggestion level
Bass
-6 ~ +6
0
Treble
-6 ~ +6
0
Loudness
-6 ~ +6
0
LipSync LR
0 ~ 16
0
LipSync C
0 ~ 16
0
Default
Off/On
off
LipSync
can
delay120ms
+/5%
for
each
mono
channel.

10. Audio input & output diagram
8
11. Audio output format table
Output Jacker & Format
HDMI_1
Out
HDMI_2
Out
OPT Out
COAX Out
6 RCA
Line Out
Input Jacker & Format
HDMI_1 PCM 5.1
In
CH
PCM 5.1
CH
PCM 2 CH PCM 2 CH Real 5.1
(Downmix) (Downmix) CH
PCM HDMI_2 PCM 5.1
5.1 CH
In
CH
PCM 5.1
CH
PCM 2 CH PCM 2 CH Real 5.1
(Downmix) (Downmix) CH
HDMI_3 PCM 5.1
In
CH
PCM 5.1
CH
PCM 2 CH PCM 2 CH Real 5.1
(Downmix) (Downmix) CH
HDMI_1
Virtual 5.1
PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH
In
CH
PCM 2 HDMI_2
Virtual 5.1
PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH
CH
In
CH
HDMI_3
Virtual 5.1
PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH
In
CH
9
PCM 2 CH
/ 5.1 CH
PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1
OPT_1 In (Audio
CH
from HDMI / 5.1 CH
In)
PCM 2 CH
/ 5.1 CH
PCM 2 CH PCM 2 CH PCM 2 CH
OPT_2 In (Audio
from HDMI / 5.1 CH
In)
PCM
2 CH
PCM 2 CH
5.1 CH
COAX_1 /(Audio
PCM 2 CH PCM 2 CH PCM 2 CH
In
from HDMI / 5.1 CH
In)
Virtual 5.1
CH
Virtual 5.1
CH
Input Jacker & Format PCM 2 CH
/ 5.1 CH
PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1
COAX_2 (Audio
CH
from HDMI / 5.1 CH
In)
PCM 2 CH
5.1 CH
RCA /(Audio
PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1
Line_1 In from HDMI / 5.1 CH
CH
In)
PCM 2 CH
5.1 CH
RCA /(Audio
PCM 2 CH PCM 2 CH PCM 2 CH
Line_2 In from HDMI / 5.1 CH
In)
Line
2 CH
PCM 2 CH
RCA / 5.1 CH
PCM 2 CH PCM 2 CH PCM 2 CH
Line_3 In (Audio
from HDMI / 5.1 CH
In)
Virtual 5.1
CH
Virtual 5.1
CH
PCM 2 CH
RCA / 5.1 CH
PCM 2 CH
Virtual 5.1
PCM 2 CH PCM 2 CH CH
Line_4 In (Audio
/
5.1
CH
from HDMI
In)
Note: 1. 6 ports of RCA output only support 5.1 Channels.
2. This system can’t support compress audio input (AC3 or DTS), if the
audio sources are contain compress audio the output from Optical,
Coaxial, 6 RCA and 5.1 CH amplifier are soundless, this is normal phenomena.
10
11. Specifications
Video Input Ports
3 x HDMI
Digital Audio Input Ports
2 x Coaxial, 2 x Optical
Analog Audio Input Ports
4 x Audio R/L
Video Output Ports
2 x HDMI
HDMI Format
V1.2
Support Resolution
480i/1080i, 1080p 50/60, 1080p 24, VGA/UXGA
HDMI Audio Format
PCM2, PCM5.1, Dolby 5.1 (PS3 Setting)
HDMI Cable in/out
15/15M
Digital Audio Output ports
1 x Coaxial, 1 x Optical
Analog Audio Output ports 5.1 channels output clips
(8ohm trumpets, the output power is around
15Wx6/90W )
Coaxial Audio Format
PCM2
Coaxial Audio Sampling
32, 44.1 and 48KHz
SPIDIF Audio Format
PCM2
SPIDIF Audio Sampling
32, 44.1 and 48KHz
Amplifier Output Format
5.1CH AMP output: PCM2, PCM5.1
5.1CH output: PCM2, PCM5.1
IR Distance
Power Supply
Horizontally free space 7M , 30 degree left/right free
space 3M
18V/3.33A DC (US/EU standards, CE/FCC/ULcertified)
Dimensions (mm)
171(W) x 356(D) x 70(H)
Weight(g)
1764
Chassis Material
Aluminum
Silk Skin Color
Silver
Operating Temperature
Operating from 0°C ~ 40°C
Power Consumption
60W (Max)
11
12
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20080902 MPM-CX5100AH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising