Direct hydraulic open/closed position indicating system for BHH/BHHF actuators

Direct hydraulic open/closed position indicating system for BHH/BHHF actuators
Data sheet
DPI-02
Sheet No.: DPI-02.01 RevA
Date: October 2010
Direct hydraulic open/closed position
indicating system for BHH/BHHF actuators
Advantages:
-Direct return message from the actuator.
-Hydraulic system allowing continuous submerged duty or safe operation in a
hazardous area.
-No installation costs when used with double acting actuators.
Description:
The system uses the flow of oil in the actuator control line to give an indication of
valve position. The oil flow is controlled by the bypass valve that is operated by an
internal cam. While the actuator is in its middle position, the bypass valve will be open
for flow in either direction. When the actuator reaches its end position, a non-return
valve in the bypass prevents further oil flow. The direction of flow is registered in the
flow indicator. Even if the actuator does not move, oil will continue to flow through the
bypass non-return valve and will be registered by the flow indicator spool. It will remain
in this position until the actuator reaches end position and the bypass valve is closed
to prevent further oil flow. This will be registered by the indicator moving to its neutral
middle position.
Components:
The system consists of two main components:
- the bypass valve and the flow indicator.
The bypass valve is fitted direct on the actuator and is operated by a cam on the
actuator stem. The bypass valve is built into a block, which also acts as a supply
manifold for the actuator.
The spool type flow indicator is supplied as a separate unit mounted in the
solenoid valve rack.
Electric hydraulic control:
The flow indicator is built into the control valve rack and will give local visual indication.
An electronic switch unit is fitted direct on the back of the flow indicator to give impulses
to initiate lamp diodes fitted in the control panel, or give secondary signals for computer
input. The indication lamps can be arranged to burn continuously when the control command
has been fulfilled and will flash while the valve under control remains in a middle position.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
DPI-02
Sheet No.: DPI-02.02 RevA
Date: October 2010
Hydraulic diagram:
1
1. Solenoid valve
2. Bypass indicator
3. Manifold
4. By-pass Cartridge
Drop tight in end positions
5. BHH actuator
5
2
4
When the solenoid valve is operated, the
flow switch will break, and the direction
switch will shift. When the valve reaches
its end position, the flow switch will close.
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement