LN Series NEMA-4X & NSF Certified Pictogram Sign

LN Series NEMA-4X & NSF Certified Pictogram Sign
Type:
Project/Location:
Contractor:
LN Series
Prepared By:
Date:
NEMA-4X & NSF Certified
Pictogram Sign
FEATURES
•NEMA-4X Certified
•NSF compliant for food processing
•Polymeric enclosure is fully gasketed around lens and canopy to secure
against water leaks
•Sealed, heavy-duty, vandal-resistant polycarbonate face plate
•Suitable for cold-weather: -40°C (-4°F) for AC/DC and -20°C (-40°F) for
Self-Powered models (option: -CW)
•Tamper-resistant, concealed test switch with magnetic action
•White LED light source
•Supplied standard with two pictogram films per face, for direction selection
•Listed CSA 22.2 No.141-10 standard for pictogram Exit Signs
•Universal AC input: two-wire 120 to 347VAC; standard DC input:
two-wire 6 to 24VDC
•Energy efficient – consumes less than 2.5W in AC or DC-remote mode
•Self-Powered models deliver two hours of back-up lighting
NEMA-4X
DIMENSIONS
Dimensions are approximate and subject to change.
Model No.:
TYPICAL SPECIFICATIONS
Supply and install the Lumacell® LN Series pictogram Exit Signs. The equipment
shall be certified for NEMA- 4X and designed specifically for high abuse areas,
wet location, and cold weather applications. The equipment frame shall be of
industrial grade polyvinyl chloride with a gasket around lenses and canopy. The
faceplate(s) shall be constructed of heavy-duty vandal-resistant polycarbonate
and feature an even illuminated legend. Each face plate shall come standard
with two legend films for pictogram and direction selection. The light source shall
be white light-emitting diodes (LED). The pictogram Exit Sign shall operate with
universal 2-wire AC input voltage of 120 to 347VAC at less than 2.5 Watts and
universal 2-wire DC input voltage from 6 to 24VDC at less than 1 Watt for single
and double face signs. The Self-Powered model shall include a concealed green
pilot light and magnet-sensitive test switch, shall use a sealed Nickel-Cadmium
battery of 2.4V nominal voltage and shall stay illuminated during emergency
operation for at least two hours upon AC failure. When specified, the Self-Powered
model shall include auto-test functions: it shall execute automatic tests for 5
minutes every 30 days, 30 minutes every 60 days and two hours annually. When
a fault is detected, the bi-colour pilot light shall turn from green to red and flash
following a particular code. The code description shall be visible on a label next to
the pilot light to identify the failure type: battery, charger circuitry, or LED lamps.
The pictogram Exit Sign shall be listed CSA 22.2 No.141-10 standard.
.
The equipment shall be Lumacell® Model:
POWER CONSUMPTION AND UNIT RATING
PICTOGRAM >
RIGHT FROM HERE
PICTOGRAM
STRAIGHT FROM HERE
< PICTOGRAM
LEFT FROM HERE
31/2” [8.7 cm]
37/8” [9.9 cm]
91/4” [23.4 cm]
14” [35.7 cm]
131/4” [33.6 cm]
DOUBLE FACE
SINGLE FACE
WIRE GUARDS
460.0079-L
Wall mount
460.0027-L
End mount
460.0028-L
Ceiling mount
MODEL
AC SPECS
DC SPECS
AC-only
120 to 347VAC
Less than 2.5W
-
-
AC/DC standard
120 to 347VAC
Less than 2.5W
6 to 24VDC
Less than 1W
AC/Special DC
120 to 347VAC
Less than 2.5W
36, 48, 120VDC
Less than 2.5W
Two-wire 120V AC/DC
120VAC
Less than 2.5W
120VDC
Less than 2.5W
Self-Powered
120 to 347VAC
Less than 3W
Ni-Cd battery
Min. 2 hours
Auto test
120 / 347VAC
Less than 3.5W
Ni-Cd battery
Min. 2 hours
IN THE SAME FAMILY: NEMA 4X
- LNC Series
Exit Sign
- RG-NX NEMA 4X Series
Battery Unit
p. 60
p. 112
- MQM-NX NEMA 4X
Remote Fixtures
p. 138
ORDERING INFORMATION
SERIES
FACES/ MOUNTING
COLOUR
LN= N
EMA-4X & NSF
pictogram exit sign
1= s ingle face universal mounting
2= d ouble face universal mounting
B= black
W= factory white
EXAMPLE: LN1BUCW
66
www.lumacell.com
VOLTAGE
S= self-powered, 120 to 347VAC
SD= self-powered diagnostic NiCad, 120 to 347VAC
SD2= self-powered diagnostic NiCad, 120 to 277VAC
U= universal 120 to 347VAC; 6 to 24VDC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2-wires 120VAC/VDC
NEX= NEXUS® system interface, 120/347VAC
NEX2= NEXUS® system interface, 120/277VAC
NEXRF= NEXUS® system interface, 120/347VAC
NEXRF2= NEXUS® system interface, 120/277VAC
OPTIONS
Blank= no options
CW= c old-weather (-20°C for SD, SD2
and NEXUS® only)
Unlike Exit Signs this pictogram sign is not available in double arrow configuration.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement