PLASMA cutting
CHAPTER 4
PLASMA cutting
PLASMA CUTTING PROCESS INSTALLATIONS
Inverter technology
I SHARP 6 including integrated compressor with CCT 500 torch
and wear parts
page 56
I SHARP 10 with CCT 1000 torch and wear parts
page 57
I SHARP 22 with CCT 2500 torch and wear parts
page 58
Transformer technology
I SHARP 25 M with CCT 2500 torch and wear parts
page 59
I SHARP 40 M with CCT 4000 torch and wear parts
page 60
TORCHES AND WEAR PARTS FOR PLASMA CUTTING
I CP 40 R/CP 100 R and wear parts
www.cemont.com
page 61
55
Plasma cutting process installation
for all conducting metals. Inverter technology.
Single-phase input voltage.
PLASMA POWER
SOURCES
SHARP 6K
LE WITH
PORTAB MPRESSOR
TED CO
INTEGRA
The SHARP 6K is a plasma cutting installation
based on inverter technology and ensuring
an excellent regulation of the welding current,
which increases the cutting quality.
The SHARP 6K includes an integrated
compressor allowing a great autonomy.
Classification
EN 60974.1
EN 60974.7
EN 60974.10
The Advantages:
I
Input voltage: 230 V single-phase –
on domestic socket-outlet 16 A.
I
Autonomy: with the integrated compressor
it is no need to have a pressured air source
available.
I
Light weight: easy to transport (only 12 kg).
I
Easy: cutting without earth clamp up to
2 mm thickness. Specially appreciated for
painted sheets.
I
Digital display: for a better adjustment and
an optimal reading of the parameters.
SHARP 6K
Cat. nr : W 000 263 709
Drag cutting
Cutting capacity (on carbon steel)
in quality
in separation
4 mm
8 mm
1
2
1
3
4
3
2
1 Digital display
2 Display selection Volt/Amp.
4
3 Selection pressure display.
4 Adjustment encoder
TECHNICAL DATA:
SHARP 6K
Input voltage single-phase
Primary consumption* - Power*
Effective consumption
Welding current
11 A
10 - 20 A
Delivered equipped with:
I
Protection class
IP 23
I
440 x 185 x 310 mm
I
www.cemont.com
W 000 265 275
W 000 266 528
W 000 302 501
W 000 302 502
W 000 302 503
W 000 302 504
16 / 3.5 kVA
20 A
Weight
56
230 V - 50/60 Hz
CCT 500 replacement torch
1 Body torch
2 Electrode FL
3 Nozzle FL 0.65
4 Skirt
5 Wrench
Duty cycle at 40 °C at 50 %
Dimensions
5
12 kg
I
electric cable with 16 A plug,
equipped earh cable,
complete torch with wear parts,
safety instruction for use and maintenance
manual.
Plasma cutting process installation
for all conducting metals. Inverter technology.
Single-phase input voltage.
BLE
P O RTA
MM
TO 10
P
U
S
CUT
The SHARP 10 is a plasma cutting
installation based on inverter technology
and ensuring an excellent regulation of
the cutting current, which increases
the cutting quality.
Classification
EN 60974.1
EN 60974.7
EN 60974.10
The Advantages:
Light weight: easy to transport (only 8 kg).
I
Drag cutting: increases the cutting quality
and reduces the fume emissions.
I
Complete: delivered ready-to-use.
I
Digital display: for a better adjustment
and an optimal reading of the parameters.
PLASMA
I
CUTTING POWER SOURCES
SHARP 10
PLASMA POWER
SOURCES
SHARP 10
Cat. nr : W 000 263 707
Drag cutting
Cutting capacity (on carbon steel)
in quality
in separation
6 mm
10 mm
1
1
2
1 Digital display.
2 Display selection Volt/Amp.
4
2
3
3
5
3 Selection pressure display.
4 Adjustment encoder.
4
TECHNICAL DATA:
SHARP 10
Input voltage single-phase
230 V - 50/60 Hz
Primary consumption* - Power*
Effective consumption
14 A
Compressed air consumption
Welding current
Duty cycle at 40 °C
Protection class
Dimensions
Weight
23 A / 5 kVA
CCT 1000 replacement torch
1 Body torch
2 Electrode FL
3 Nozzle FL 0.8
4 Skirt
5 Wrench
W 000 265 276
W 000 266 530
W 000 302 501
W 000 302 505
W 000 302 503
W 000 302 504
> 100 l/min - 4 bars
10 - 30 A
Delivered equipped with:
at 35 %
30 A
at 60 %
25 A
at 100 %
20 A
I
IP 23
I
415 x 170 x 310 mm
I
8 kg
I
electric cable with 16 A plug,
equipped earh cable,
complete torch with wear parts,
safety instruction for use and maintenance
manual.
* at maximum cutting intensity
www.cemont.com
57
Plasma cutting process installation
for all conducting metals. Inverter technology.
Three-phase input voltage.
PLASMA POWER
SOURCES
SHARP 22
BLE
PORTA
MM
TO 24
P
U
S
CUT
The SHARP 22 is a powerful plasma cutting
installation based on inverter technology and
ensuring an excellent regulation of the cutting
current, which increases the cutting quality.
le o n
Av a il a b 2 0 0 7
e
t
r r
3rd q u a
The Advantages:
I
Compact and light weight: less than 25 kg and
compact. Easy handling.
I
Powerful: quality cutting up to 20 mm.
I
High cutting performance: cutting intensity
maxi 65 A at 40% (40 °C) or at 100% (25 °C).
I
Gouging: to make drains.
I
Cutting out metal grids: with automatic restarting.
I
Drag cutting: increases the cutting quality and
reduces the fume emissions.
I
Complete: delivered ready-to-use.
Classification
EN 60974.1
EN 60974.7
EN 60974.10
SHARP 22
Cat. nr : W 000 262 496
1
Cutting capacity (on steel)
in quality
in separation
20 mm
24 mm
1
2
2
3
3
6
4
1
Process selection:
cutting - grid - gouging.
Air pressure.
2 Cutting intensity
adjustment.
2
Drag cutting
Distance cutting
5
TECHNICAL DATA:
SHARP 22
Input voltage three-phase
400 V - 50/60 Hz
Primary consumption* - Power*
Effective consumption
14.5 A
Welding current
Duty cycle
Protection class
Dimensions
Weight
* at maximum cutting intensity
58
www.cemont.com
20.1 A (400V) / 13 kVA
10 - 65 A
at 40 %
65 A at 40 °C
at 100 %
50 A at 40 °C
at 100 %
65 A at 25 °C
IP 23
435 x 235 x 380 mm
25 kg
CCT 2500 replacement torch
1 Body torch
2 Electrode FL
3 Nozzle L 1.2
4 Skirt for drag cutting
5 Wrench
6 Skirt for distance cutting
W 000 265 277
W 000 266 530
W 000 302 501
W 000 302 506
W 000 302 503
W 000 302 504
W 000 302 507
Delivered equipped with:
I
I
I
electric cable, equipped earh cable,
complete torch with wear parts,
safety instruction for use and maintenance
manual.
Plasma power source
for cutting of all conducting metals.
Three-phase input voltage.
F
TRANS
The SHARP 25 M plasma cutting transformer
technology installation is a power source aimed
to both workshop and on site applications.
It shows a great adjustment facility.
ORMER
le o n
Av a il a b 2 0 0 7
rter
3rd q u a
The Advantages:
Classification
Input voltage: 220 V / 230 V / 380 V / 400 V
three-phase.
I
Easy: only 1 switch to adjust power on 3 positions.
I
Versatile: can cut and pierce all conducting metals.
I
Powerful: high duty cycle 80 A at 40% at 40 °C.
I
Complete: delivered ready-to-use.
I
Starting: without HF. Clean technology with blow-back.
PLASMA
EN 60974.1
EN 60974.7
EN 60974.10
I
CUTTING POWER SOURCES
SHARP 25 M
PLASMA POWER
SOURCES
SHARP 25 M
Cat. nr : W 000 261 830
Cutting capacity (on carbon steel)
percing
in quality
in separation
8 mm
20 mm
25 mm
1
2
2
3
1 Defect indicator.
2 Main power switch.
3
3 Cutting torch.
4 Output current selector.
5
4
4
5 Earth clamp plug.
Drag cutting
Distance cutting
TECHNICAL DATA:
5
SHARP 25 M
Input voltage three-phase 50/60 Hz
220 V
230 V
380 V
400 V
Primary consumption*
49 A
47 A
28 A
27 A
Effective consumption
31 A
29 A
18 A
17 A
Power
11 kVA
Pressured air consumption
Welding current
Duty cycle at 40 °C
Protection class
Dimensions
Weight
www.cemont.com
CCT 2500 replacement torch
1 Body torch
2 Electrode
3 Nozzle
4 Skirt for drag cutting
5 Wrench
6 Skirt for distance cutting
180 l/min - 5 bars
30 - 80 A
at 40 %
80 A
at 80 %
50 A
at 100 %
30 A
IP 23
500 x 855 x 705 mm
80 kg
W 000 265 277
W 000 266 529
W 000 302 501
W 000 302 506
W 000 302 503
W 000 302 504
W 000 302 507
Delivered equipped with:
I
I
I
electric cable and equipped earh cable,
complete torch with wear parts,
safety instruction for use and maintenance
manual.
59
Plasma power source
for cutting of all conducting metals.
Three-phase input voltage.
SHARP 40 M
The SHARP 40 M plasma cutting transformer
technology installation is a power source aimed
to both workshop and on site applications.
It shows a great adjustment facility.
The Advantages:
F
TRANS
PLASMA POWER
SOURCES
ORMER
le o n
Av a il a b 2 0 0 7
e
rt r
3rd q u a
Classification
I
Input voltage: 220 V / 230 V / 380 V / 400 V
three-phase.
I
Easy: only 1 switch to adjust power on 4 positions.
I
Versatile: can cut and pierce all conducting metals.
I
Powerful: high duty cycle 120 A at 50% at 40 °C.
I
Complete: delivered ready-to-use.
I
Starting: without HF. Clean technology with blow-back.
EN 60974.1
EN 60974.7
EN 60974.10
SHARP 40 M
Cat. nr : W 000 261 831
Cutting capacity (on carbon steel)
percing
in quality
in separation
8 mm
35 mm
40 mm
1
1
2
3
4
5
2
3
1 Defect indicator.
2 Main power switch.
4
5
6
5 Earth clamp plug.
TECHNICAL DATA:
8
CCT 4000 replacement torch
1 Body torch
2 Electrode for drag cutting
3 Electrode for distance cutting
4 Nozzle for drag cutting
5 Nozzle for distance cutting
6 Skirt for drag cutting
7 Skirt for distance cutting
8 Wrench
SHARP 40 M
Input voltage three-phase 50/60 Hz
220 V
230 V
380 V
400 V
Primary consumption*
74 A
71 A
42 A
40 A
Effective consumption
52 A
50 A
30 A
28 A
Power
16 kVA
Pressured air consumption
220 l/min - 5.5 bars
Welding current
Duty cycle at 40 °C
Protection class
Dimensions
Weight
60
www.cemont.com
7
3 Cutting torch.
4 Output current selector.
30 - 120 A
at 50 %
120 A
at 75 %
85 A
at 100 %
50 A
IP 23
500 x 855 x 705 mm
125 kg
W 000 265 279
W 000 266 534
W 000 302 501
W 000 302 508
W 000 302 506
W 000 302 509
W 000 302 510
W 000 302 511
W 000 302 504
Delivered equipped with:
I
I
I
electric cable and equipped earh cable,
complete torch with wear parts,
safety instruction for use and maintenance
manual.
Torches and wear parts for PLASMA cutting.
PLASMA torch
Type CP 40 R/CP 100 R
TORCHES WEAR PARTS:
1
REPLACEMENT TORCHES:
2
9
4
10
5
5
6
8
TORCHES
3
7
Cat. nr
Cat. nr
France / Italy
France / Italy
1
Torch body
40 006 396 / 090055516
CP 40 R length 6 m
090055597
2
Immersion tube
40 006 386 / 090055519
CP 100 R length 6 m
090055595
3
Short electrode
40 006 387 / 090055520
4
Short nozzle C
5
Skirt TN
40 006 391 / 090055533
6
Skirt TI
40 006 392 / 090055534
7
Embossing skirt TI
40 006 393 / 090055535
8
Guide shoe
40 006 394 / 090055517
9
Long electrode L
10 Conical nozzle
www.cemont.com
AND WEAR PARTS FOR PLASMA CUTTING
PLASMA
WEAR PARTS
Ø 1.0 mm
40 006 388 / 090055525
Ø 1.2 mm
40 006 389 / 090055526
Ø 1.6 mm
40 006 390 / 090055527
40 006 189 / Ø 0.8 mm
40 008 208 / -
Ø 1.2 mm
40 008 190 / -
61
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising