advertisement
SPECIFICATIONS KF695z
FEATURES
• Compact Virtual Array™ three-way system
• Vented, LF horn-loaded MF/HF (90° x 45° coverage pattern)
• 15-in LF,10-in MF, 3-in voice coil/1.4-in exit HF
• Switchable powering: Tri-amp or Bi-amp
(passive LF/MF)
• For portable use or permanent installation
DESCRIPTION
A 3-way full range system in a vented trapezoidal enclosure.
Includes a 15-in woofer, vented, a horn-loaded 10-in midrange cone and a 1.4-in exit compression driver on a 90° x 45° constant directivity horn. Powering mode is switchable: bi-amplified (passive LF/MF crossover) or tri-amplified.
APPLICATION
The KF695z Virtual Array™ system’s true 3-way design dramatically improves the quality of vocal reproduction while its cone-driven midrange horn extends pattern control into the lower octaves. Universal suspension hardware (flytrack with integral 3/8"-16 mounting point) supports permanent or portable applications. Six year warranty.
Applications include:
Concert Tours
Band PA
Corporate Events
Ballroom Events
Convention Centers
Large Houses of Worship Live Music Club
PERFORMANCE
Frequency Response (Hz)
±3 db 65 Hz to 17 kHz
-10 dB 50 Hz
Axial Sensitivity (dB SPL, 1 Watt @1m)
Bi-amped LF/MF 100
LF 100
MF 109
HF 110
Impedance (Ohms)
Bi-amped LF/MF 8
LF 8
MF 8
HF 8
Power Handling, (Watts Continuous)
Bi-amped LF/MF 700
LF 700
MF 400
HF 160
Recommended High-Pass Frequency
24 dB/Octave 50 Hz
Calculated Maximum Output (dB SPL @ 1m)
Bi-amped LF/MF Peak 134.5
LF Peak 134.5
MF Peak 141.0
HF Peak 138.0
Bi-amped LF/MF Long Term 128.5
LF Long Term 128.5
MF Long Term 135.0
HF Long Term 132.0
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal 90
Vertical 45
PHYSICAL
LF Subsystem 1x 15-in, vented
MF Subsystem 1x 10-in horn-loaded cone
HF Subsystem 1x 1.4-in exit compression driver on constant directivity horn
Configuration 3-way, full fange
Powering Switchable: bi-amplified (passive
LF/MF crossover) or tri-amplified
Controls (switches, knobs) Powering mode switch
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic birch plywood
Finish Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
2x Neutrik NL8 Speakon
Suspension Hardware (6) 3-position flytracks with integral 3/8”-16 threaded mount ing points (3 each top and bottom)
Grille Powder coated perforated steel, foam backed
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
KF695z/2 pp [email protected]
October 2001 www.eaw.com
Printed in USA
SPECIFICATIONS KF695z
DIMENSIONAL DRAWING
1. SYMBOL INDICATES 3.00 X 1.35 FLYTRACK.
2. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (FLYTRACK) .
3. SYMBOL INDICATES CENTER OF BALANCE.
19.75 T.S.C.
2.13
(12.81)
C
A
12.25
5.94
14.25
20°
TOP
DIMENSIONS APPLY
TO TOP & BOTTOM
10.00
20.62
A
ACCESS PANEL
INPUT
28.98
16.75
8.00
10.08
BACK
4.50
33.25
8.25
6.05
22.42
2X 8.75
GRILLE PARTIALLY SHOWN
FRONT
2X 6.44
4X HANDLE
28.98
14.58
VIEW A-A
DIMENSIONS APPLY
2.13
TO BOTH SIDES
509098 (1)
6/19/01
Manufacturing tolerances are +/- 0.13 and +/- 1°
PHYSICAL continued
Dimensions
Weights
Inches
Height 33.3
Width (front) 19.8
Width (rear) 12.9
Millimeters
845
502
328
Depth 20.6
524
Trapezoid Angle 10 Degrees per Side
Pounds
Net Weight 135.0
Shipping Weight 142.0
Kilograms
61.4
64.6
A & E SPECIFICATIONS
The three-way full range loudspeaker system shall incorporate a 15-in LF transducer, a 10-in cone MF transducer and a 1.4in exit compression driver HF transducer.
The LF driver shall be mounted in a vented enclosure tuned for optimum low frequency response. The MF driver shall be loaded into a midrange horn constructed of 3mm birch plywood reinforced with high density polyurethane foam. The MF horn shall incorporate a phase/displacement plug. The HF driver shall be loaded on a constant directivity horn with a nominal coverage pattern of 90° (h) x 45° (v). An internal passive filter network shall provide system equalization and fourth order acoustical crossover between the low and mid frequency sections in bi-amped mode .
System frequency response shall vary no more than ±3 dB from 65 Hz to 17 kHz measured on axis. In bi-amped mode, the low/mid section shall produce a Sound Pressure Level
(SPL) of 100 dB SPL on axis at 1 meter with a power input of
1 Watt, and shall be capable of producing a peak output of
134.5 SPL on axis at 1 meter. It shall handle 700 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms. The HF section shall produce a Sound
Pressure Level (SPL) of 110 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 138 SPL on axis at 1 meter. It shall handle 160
Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms.
In tri-amped mode, the low frequency and high frequency sections shall meet all bi-amped mode performance criteria. In addition, the midrange frequency section in tri-amped mode shall produce a Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 141 SPL on axis at 1 meter. It shall handle 400 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of multi-ply, void-free cross-grain-laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connectors shall be 2x Neutrik NL4
Speakon and 2 x Neutrik NL8 Speakon. The system shall include a switch allowing it to be operated in bi-amp or triamp powering mode. A total of six 3-position flytracks with integral 3/8"-16 threaded mounting point (3 each top and bottom) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille backed with open cell foam to protect against dust.
The three-way full range loudspeaker shall be the EAW model
KF695z.
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
KF695z/2 pp [email protected]
October 2001 www.eaw.com
Printed in USA
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project