LE - Liquid Level Sensors

LE - Liquid Level Sensors
Prices as of April 15, 2015. Check Web site for most current prices.
Company
Information
Drives
Level Sensors
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Up-to-date price list:
www.automationdirect.com/pricelist
FREE Technical Support:
www.automationdirect.com/support
FREE Videos:
www.automationdirect.com/videos
In this interactive PDF you can:
•Use bookmarks to navigate
by product category
FREE Documentation:
•Use bookmarks to save,
search, print or e-mail the
catalog section
www.automationdirect.com/cad
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
www.automationdirect.com/documentation
FREE CAD drawings:
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
•Click on part #s to link
directly to our online store
for current pricing, specs,
stocking information and
more
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-1
Prices as of April 15, 2015. Check Web site for most current prices.
Liquid Level Sensors and Switches
Flowline® Ultrasonic Level
Sensors and Switches
(Non-contact)
The Flowline EchoPod®, EchoSonic® II,
Echotouch™, EchoSpan® and EchoSwitch®
are innovative ultrasonic liquid level sensor
families that replace float, conductance and
pressure sensors that fail due to contact with
dirty, sticky and scaling liquids in small, medium
and large capacity tanks. These liquid level
sensors can be used in either open or enclosed
tanks (not suitable for pressurized tanks).
PC software configured or pushbutton configured models are available.
Software Configured Ultrasonic Liquid Level
Sensors & Switches
Pushbutton Configured Ultrasonic Liquid Level
Sensors & Switches
Software Configuration: For software configured sensors, PC
configuration is simple with FREE (download) WebCal™ level
sensor software and the programming fob with USB adapter.
Pushbutton Configuration: With no software or PC required,
the Echotouch, EchoSpan, and EchoSwitch ultrasonic level
sensors are easily configured using integral pushbuttons and
LCD digital display. Configuration parameters are organized
in a simple menu structure so that parameter values are easily
accessed and set or changed as needed.
•Echotouch™ LU20 Ultrasonic Level Transmitter
•EchoSpan® LU Series Ultrasonic Level Transmitters
•EchoSwitch® LU Series Ultrasonic Level Sensors
•EchoPod DS14 Series Ultrasonic Liquid Level Switch & Controller
•EchoPod DX10 and DL10 Series Ultrasonic Liquid Level Transmitters
•EchoPod DL Series Multi-Function Ultrasonic Liquid Level Sensors
•EchoSonic II LU Series Ultrasonic Liquid Level Transmitters
WebCal Ultrasonic Level Sensor Configuration Software and Fob
USB Adapter
•Free WebCal Configuration Software (download only)
•WebCal Software CD also availaible for purchase
•LI99-1001 fob USB adapter
PodView®
The PodView digital level indicator is a low-cost general purpose
level indicator that displays engineering units for level or volume
and is compatible with the EchoPod Series ultrasonic sensors.
Flowline Level Sensors (Contact)
• Ultrasonic Level Switches: are intrinsically safe and provide reliable
liquid level detection of chemical, solvent, hydrocarbon and
petroleum based liquids.
• Vibration Point Level Switch: provides reliable liquid level detection of
dirty liquids such as those with light to medium coating, scaling or
foaming characteristics.
• Capacitance Level Switch: provides reliable high or low liquid level
detection of water based conductive liquids with light coating,
crystalizing or scaling characteristics with a 1A relay output.
• Buoyancy Level Switch: provides reliable liquid level detection of
relatively clean water and chemical solutions.
Book 2 (14.1)
eLE-2
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Company
Information
Drives
Flowline Level Controllers
Switch-Pro™ general purpose level controllers are available in three
discrete sensor input configurations for alarms, pump and valve control.
The LC52 DataPoint™ general purpose controller for analog sensor inputs
provides single tank level indication with 2 relays, up to three setpoints and
an isolated analog repeater.
• Switch-Pro LC40 Remote Level Controller: one level sensor input
and one non-latching 10A relay output for high level or low level alarm
• Switch-Pro LC41 Remote Level Controller: two level sensor inputs
and one latching 10A relay output for automatic fill or empty control
• Switch-Pro LC42 Remote Level Controller: three level sensor inputs
and one latching 10A relay output and one nonlatching 10A relay output
• DataPoint LC52 Remote Level Controller: one 4-20 mA input, two relay outputs,
•
one 4-20 mA output
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
ProSense® Submersible Level Sensors
The SLT1 series has a slim 1-inch diameter housing and a ported bullet
nose cap for protection of the sensor diaphragm. The SLT2 series features
a large 2.75 inch diameter PTFE flexible diaphragm surrounded by a 316
stainless steel non-fouling protective cage.
•SLT1 Series Transmitter with 1-inch Diameter Housing
•SLT2 Series Transmitter with 2.75-inch Diameter Diaphragm and Protective Cage
•Submersible Level Transmitter Vent Filter
•Submersible Level Transmitter Bellows
•Junction Boxes for Submersible Level Transmitters
•Submersible Level Transmitter Replacement Nose Caps
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
ProSense Float Level Switches
Process
These switches are available in several different material constructions for
compatibility with many types of liquids, a wide temperature range, and
various system pressure requirements. Vertical and horizontal mounting
styles with several mounting thread variations are available for ease of
installation.
•Vertical Top-Mount
•Vertical Suspendible / Submersible
•Horizontal Side-Mount
•Float Level Switch Kits
•Float Level Tilt Switches
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-3
Prices as of April 15, 2015. Check Web site for most current prices.
Ultrasonic Liquid Level Sensors
Quality level sensing solutions from Flowline and AutomationDirect!
• Innovative ultrasonic liquid level sensor families that replace float,
conductance and pressure sensors
• Applied in chemical, water and wastewater applications, these general
purpose non-contact sensors are available with single and multi-function capabilities including continuous level
measurement, switching and control.
• For input to a PLC or other controller, measurement
outputs include current, voltage and frequency
• Models with four relays can be configured for level alarms and/or
stand-alone level control such as automatic fill or empty functions
using the embedded level controller
• Software and pushbutton configurable models available
EchoPod® & EchoSonic® II
Ultrasonic Liquid Level Sensors
PC configuration is simple
with FREE WebCal™ software.
PodView®
The PodView digital level indicator is
a low-cost general purpose level indicator that displays engineering units for
level or volume and is compatible with
the EchoPod Series ultrasonic sensors.
Echotouch™, EchoSpan® & EchoSwitch®
Ultrasonic Liquid Level Sensors
Units are easily configured
using built-in pushbuttons
Book 2 (14.1)
eLE-4
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
EchoPod® & EchoSonic® II
Ultrasonic Liquid Level Sensors
The EchoPod and EchoSonic II are innovative ultrasonic liquid
level sensor families that replace float, conductance and
pressure sensors that fail due to contact with dirty, sticky and
scaling media in small, medium and large capacity tanks.
Applied in chemical, water and wastewater applications, these
general purpose non-contact sensors are available with single
and multi-function capabilities including continuous level
measurement, switching and control.
For input to a PLC or other controller, measurement outputs
include current, voltage and frequency. Models with four
relays can be configured for level alarms and/or stand-alone
level control such as automatic fill or empty functions using
the embedded level controller. PC configuration is simple with
WebCal™ software.
Company
Information
Drives
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
EchoPod & EchoSonic II Ultrasonic Liquid Level Sensors General Specifications
Model
DL34-00
DL24-00
DL14-00
DS14-00
DX10-00
DL10-00
LU27-00
LU23-00
LU28-00
LU29-00
Price
$511.00
$418.00
$325.00
$306.00
$260.00
$283.00
$469.00
$562.00
$655.00
$748.00
Type
EchoPod
EchoSonic II
Class
Range
Output Types
2 in to 4.1 ft (5 cm to 1.25m)
4-20 mA and (4) SPST relays
(4) SPST relays
Relays
4 in to 9.8 ft 8 in to 18 ft (20 8 in to 26.2 ft 8 in to 32.8 ft
(10 cm to 3m) cm to 5.5m) (20 cm to 8m) (20 cm to 10m)
0-5V, 0-10V,
976-2000 Hz
Install
Mounting
Sensors:
Temperature
General Purpose (non-hazardous)
8 in to 18 ft (20 4 in to 9.8 ft
cm to 5.5m) (10 cm to 3m)
1 in MNPT
Pushbuttons
and Lights
2 in MNPT
(4) SPST
Configuration
Ambient
Temperature
Process
Temperature
Pressure
No Relay
Stacklights
WebCal Software (free download) and LI99-1001 Fob USB Adapter (purchased separately)
Signal
Devices
-31° to 140°F (-35° to 60°C)
Process
20° to 140°F (-7° to 60°C)
-4° to 140°F (-20° to 60°C)
Relays and
Timers
30 PSI (2 bar) max.
Pneumatics:
Air Prep
WebCal Software
WebCal
LI99-1001
WebCal PC software is a utility program that allows users to easily configure their EchoSonic II and EchoPod level
transmitters, switches, and controllers. Download your free copy of WebCal at www.AutomationDirect.com, and
connect your sensor through our Fob USB adapter (LI99-1001). Develop your configuration using pre-programmed
function menus as the tank graphic and set point fields automatically change to match your configuration. Then,
input your level set point values and click the Write to Unit button. Your configuration will be downloaded into
the sensor and verified in less than a second. Last, click the Wiring Diagram button to open a wiring schematic of your configuration in PDF format. Print the document, disconnect the sensor and wire it per the schematic. As new software or firmware becomes available, they can be downloaded and updated through WebCal.
PodView®
LI40-1001
Sensors:
Level
Sensors:
Flow
4-20 mA
Vertical, top of tank
2 in MNPT
Sensors:
Pressure
The PodView digital level indicator is a low cost general purpose level indicator that displays engineering units for
level or volume and shares power with an EchoPod ultrasonic sensor, including loop powered devices. The LI40
can be field mounted for local indication as well as be used to make simple setting changes to the sensor. The
display can be easily attached to any EchoPod sensor that has been configured with WebCal 6.0 / firmware 50.0
or higher. PodView displays sensor output and can reconfigure sensor setpoints on the fly. PodView shares power
with the sensor and does not require any additional outside power supply.
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-5
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Prices as of April 15, 2015. Check Web site for most current prices.
EchoPod DS14 Ultrasonic
Liquid Level Switch & Controller
Overview
The EchoPod DS14 ultrasonic liquid level switch provides continuous level detection
up to 4.1 ft (1.25m), with 4 programmable relays for level switch or level control
functions, and is configured via WebCal software. The embedded level controller
can lower cost by replacing external control hardware. This non-contact liquid level
sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected
for small day tank, skid, intermediate bulk tanks, sump and process tank level
applications.
Features
DS14-00 Technical Specifications
Price
Range
Accuracy
Resolution
Sensing Dead Band*
Beam Width
Configuration
Memory
Supply Voltage
Consumption
Output Type
Contact Voltage Ratings
Contact Fail-Safe
Hysteresis
Process Temperature
Temp. Compensation
Ambient Temperature
Pressure
Enclosure Rating
Enclosure Material
Strain Relief Material
Transducer Material
Cable Jacket Material
Cable Type
Cable Length
$306.00
2 in to 4.1 ft (5 cm to 1.25m)
0.125 in (3 mm)
0.019 in (0.5 mm)
2 in (5 cm)
2 in (5 cm)
WebCal Free Software and
LI99-1001 USB Fob Adapter
Non-volatile
12 to 24 VAC/VDC
0.5W
Agency Approvals
• cFMus
Dimensions
inches [mm]
(4) SPST relays
120 VAC/DC @ 0.5A;
30 VAC/DC @ 1A
Power loss: Hold last
Echo loss: Open, close or hold last
Selectable
20° to 140°F (-7° to 60°C)
Automatic
-31° to 140°F (-35° to 60°C)
30 PSI (2 bar) MAX
NEMA Type 6P, IP67, encapsulated,
corrosion resistant & submersible,
UV stable
Polycarbonate
Santoprene
Polyvinylidene Flouride
Polyurethane
9-conductor, shielded
48 in (1.2m)
Viton® (included, replacement part
number 204038)
0.5
The settings for the the DS14 are configured
with free WebCal software (downloadable
from AutomationDirect Web site), and an
LI99-1001 Fob USB adapter (purchased
separately).
R ed
Blk
W ht
Gr n
Blu
Or g
Yel
Pur
Br n
-
Power
Return
TX (Out)
RX (In)
Rly 1
Rly 2
Rly 3
Rly 4
Rly Com
RED
GREEN
Mount Gasket
Wiring
Configuration
WHITE
BLACK
Process Mount
1 in MNPT (See accessories for
installation fittings)
Weight (lbs)
Classification
Compliance
Agency Approvals
•Continuous level detection up to 4.1 ft (1.25 m)
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2 inch beam width and short 2 inch dead band optimized for small tanks
• Four programmable relays for switch, pump or valve control and fail-safety
- 1 pump or valve with 3 alarms
- 2 pumps (lead-lag) with 2 alarms
- 2 pumps (duplexing) with 2 alarms
- 4 independent outputs
• PVDF transducer and NEMA Type 6P polycarbonate enclosure for corrosive liquids,
UV stable for outdoor use
• Automatic temperature compensation for accurate measurement
• Made in the USA
General purpose
CE, RoHS
PART NO.: LI99-1001
cFMus
* Dead band is the minimum distance the sensor must be
mounted above the max liquid level.
See the end of the Ultrasonic Level Sensor Section for further details and
Accessories
Book 2 (14.1)
eLE-6
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
EchoPod DX10 Ultrasonic
Liquid Level Transmitter
Company
Information
Drives
Soft Starters
Overview
Motors
The EchoPod DX10 ultrasonic liquid level transmitter provides continuous level
measurement up to 4.1 ft (1.25m), with a selectable 0-5 VDC, 0-10 VDC or
976-2000 Hz frequency signal output, and is configured via WebCal software.
Select the voltage output for interface with analog input cards. Select the frequency
output for interface with discrete input cards. This non-contact liquid level sensor is
ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for small
day tank, skid, intermediate bulk tanks, sump and process tank level applications.
Features
DX10-00 Technical Specifications
Price
Range
Accuracy
Resolution
Sensing Dead Band*
Beam Width
Configuration
Memory
Supply Voltage
Consumption
Signal Output
Minimum Load
Output Current
Signal Invert
Signal Fail-Safe
Process Temperature
Temp. Compensation
Ambient Temperature
Pressure
Enclosure Rating
Enclosure Material
Strain Relief Material
Transducer Material
Cable Jacket Material
Cable Type
Cable Length
$260.00
2 in to 4.1 ft (5 cm to 1.25m)
0.125 in (3 mm)
2 in (5 cm)
Sensors:
Pressure
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Level
inches [mm]
Sensors:
Flow
0.5W
Pushbuttons
and Lights
0-5V, 0-10V, 976-2000 Hz
800Ω at 12 VDC; 1600Ω at 24 VDC
Stacklights
Sink current, 15 mA nominal
Signal
Devices
5-0V, 10-0 V, 2000-976 Hz
Full, empty or hold last
Process
20° to 140°F (-7° to 60°C)
Automatic
Relays and
Timers
-31° to 140°F (-35° to 60°C)
30 PSI (2 bar) MAX
NEMA Type 6P, IP67, encapsulated,
corrosion resistant & submersible,
UV stable
Polycarbonate
Pneumatics:
Air Prep
Wiring
Configuration
Red
Blk
Wht
Grn
The settings for the the DX10 are configured
with free WebCal software (downloadable
from AutomationDirect Web site) and an
LI99-1001 Fob USB adapter (purchased
separately).
Santoprene
Polyvinylidene Flouride
Polyurethane
6-conductor, shielded
Viton® (included, replacement part
number 204038)
Pneumatics:
Cylinders
Pneumatics:
Air Fittings
RED
Mount Gasket
Power
Return
TX (Out)
RX (In)
Blu - Voltage Out
Brn - Frequency Out
GREEN
WHITE
BLACK
Process Mount
-
Pneumatics:
Directional Control
Valves
Pneumatics:
Tubing
48 in (1.2m)
Appendix
Book 2
0.5
Terms and
Conditions
PART NO.: LI99-1001
CE, RoHS
cFMus
* Dead band is the minimum distance the sensor
must be mounted above the max liquid level.
Sensors:
Encoders
Sensors:
Temperature
Non-volatile
General purpose
Sensors:
Proximity
Agency Approvals
12 to 24 VDC
1 in MNPT (See accessories for
installation fittings)
Weight (lbs)
Classification
Compliance
Agency Approvals
Motor Controls
Sensors:
Photoelectric
Dimensions
2 in (5 cm)
WebCal Free Software and
LI99-1001 USB Fob Adapter
Motion: Servos
and Steppers
•Continuous non-contact level measurement output up to 4.1 ft (1.25 m)
• Selectable voltage (analog) or frequency (discrete) signal outputs
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2 inch beam width and short 2 inch dead band optimized for small tanks
• PVDF transducer and NEMA Type 6P polycarbonate enclosure for corrosive liquids,
UV stable for outdoor use
• Automatic temperature compensation for accurate measurement
• Made in the USA
• cFMus
0.019 in (0.5 mm)
Power
Transmission
When installing the 1 inch NPT level sensors care should be used to mechanically isolate the sensor housing from
the tank. This can easily be done by using any of the Flowline mounting accessories which are designed to provide
the isolation needed. See the end of the Ultrasonic Level Sensor Section for further details and Accessories
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-7
Prices as of April 15, 2015. Check Web site for most current prices.
EchoPod DL10 Ultrasonic
Liquid Level Transmitter
Overview
The EchoPod DL10 ultrasonic liquid level transmitter provides continuous level
measurement up to 4.1 ft (1.25m), with a 4-20mA signal output, and is configured via WebCal software. This non-contact liquid level sensor is ideally suited for
corrosive, sticky or dirty liquids, and is broadly selected for small day tank, skid,
intermediate bulk tanks, sump and process tank level applications.
Features
• Continuous non-contact level measurement output up to 4.1 ft (1.25m)
•4-20 mA output for longer signal distances, up to 1000 ft. (300 m)
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2 inch beam width and short 2 inch dead band optimized for small tanks
• PVDF transducer and NEMA Type 6P polycarbonate enclosure for corrosive liquids,
UV stable for outdoor use
• Automatic temperature compensation for accurate measurement
• Made in the USA
DL10-00 Technical Specifications
Price
Range
Accuracy
Resolution
Sensing Dead Band*
Beam Width
Configuration
Memory
Loop Supply Voltage
Consumption
Loop Resistance
Signal Output
Signal Invert
Signal Fail-Safe
Process Temperature
Temp. Compensation
Ambient Temperature
Pressure
Enclosure Rating
Enclosure Material
Strain Relief Material
Transducer Material
Cable Jacket Material
Cable Type
Cable Length
$283.00
2 in to 4.1 ft (5 cm to 1.25m)
0.125 in (3 mm)
• cFMus
Dimensions
0.019 in (0.5 mm)
2 in (5 cm)
inches [mm]
2 in (5 cm)
WebCal Free Software and
LI99-1001 Fob USB Adapter
Non-volatile
14-28 VDC1
0.5W
500Ω max at 24 VDC
4-20 mA, two-wire
4-20 mA or 20-4 mA
4 mA, 20 mA, 21 mA, 22 mA or
hold last
20° to 140°F (-7° to 60°C)
Automatic
-31° to 140°F (-35° to 60°C)
30 PSI (2 bar) MAX
NEMA Type 6P, IP67, encapsulated,
corrosion resistant & submersible,
UV stable
Wiring
Configuration
The settings for the the DL10 are
configured with free WebCal
software (downloadable from
AutomationDirect Web site) and
an LI99-1001 Fob USB adapter
(purchased separately).
Polycarbonate
Santoprene
Polyvinylidene Flouride
Polyurethane
4-conductor, shielded
48 in (1.2m)
Viton (included, replacement part
number 204038)
Red
Blk
Wht
Grn
-
Power
Power Return or 4-20mA Loop Output
TX (Out)
RX (In)
RED
GREEN
WHITE
Mount Gasket
BLACK
Process Mount
1 in MNPT (See accessories for
installation fittings)
Weight (lbs)
Classification
Compliance
Agency Approvals
Agency Approvals
0.5
General purpose
CE, RoHS
PART NO.: LI99-1001
cFMus
* Dead band is the minimum distance the sensor must
be mounted above the max liquid level.
1
If supply exceeds 28 VDC damage to the
transmitter may occur.
When installing the 1 inch NPT level sensors care should be used to mechanically isolate the sensor housing from
the tank. This can easily be done by using any of the Flowline mounting accessories which are designed to provide
the isolation needed. See the end of the Ultrasonic Level Sensor Section for further details and Accessories
Book 2 (14.1)
eLE-8
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
EchoPod DL Series Multi-Function
Ultrasonic Liquid Level Sensors
Overview
Features
The EchoPod DL series multi-function ultrasonic liquid level sensors
provide continuous level measurement up to 4.1 ft (1.25m), 9.8 ft
(3m), or18 ft (5.5m), with a 4-20mA signal output and 4 programmable relays for level switch or level control functions, and are
configured via WebCal software. The embedded level controller
can lower cost by replacing external control hardware. This
non-contact liquid level sensor is ideally suited for corrosive, sticky
or dirty liquids, and is broadly selected for small day tank, skid,
intermediate bulk tanks, sump and process tank level applications.
Part No. DL24-00
Part No. DL34-00
• cFMus
DL14-00
DL24-00
$325.00
$418.00
$511.00
4 in to 9.8 ft (10 cm to 3m)
8 in to 18.0 ft (20 cm to 5.5m)
± 0.2% of range
0.019 in (0.5 mm)
0.039 in (1 mm)
0.079 in (2 mm)
2 in (5.1 cm)
4 in (10.2 cm)
8 in (20.3 cm)
2 in (5.1 cm)
3 in (7.6 cm)
2 in (5.1 cm)
WebCal Free Software and LI99-1001 Fob USB Adapter
Non-volatile
0.5W
4-20 mA or 20-4 mA
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Process
4 mA, 20 mA, 21 mA, 22 mA or hold last
(4) SPST relays
Relays and
Timers
0.5A @ 120 VAC/DC; 1A @ 30 VAC/DC
Power loss: Hold last; Echo loss: Open, close or hold last
Pneumatics:
Air Prep
Selectable
20° to 140°F (-7° to 60°C)
Pneumatics:
Directional Control
Valves
Automatic
-31° to 140°F (-35° to 60°C)
30 PSI (2 bar) MAX
Pneumatics:
Cylinders
NEMA Type 6P, IP67, encapsulated, corrosion resistant & submersible, UV stable
Polycarbonate
Pneumatics:
Tubing
Santoprene
Polyvinylidene Flouride
Pneumatics:
Air Fittings
Polyurethane
9-conductor, shielded
48 in (1.2m)
1 in MNPT (See accessories for installation fittings)
2 in MNPT (See accessories for installation fittings)
Viton (included, replacement part number 204038) Viton (included, replacement part number 200128)
Viton (included, replacement part number 200129)
1.8
General purpose
CE, RoHS
cFMus
If supply exceeds 28 VDC damage to the transmitter may occur.
www.automationdirect.com/ultrasonic-level-sensors
Sensors:
Proximity
Signal
Devices
4-20 mA, two-wire
* Dead band is the minimum distance the sensor must be mounted above the max liquid level.
1
Motor Controls
Stacklights
500Ω max @ 24 VDC
0.9
Motion: Servos
and Steppers
Pushbuttons
and Lights
14 - 28 VDC1
0.5
Power
Transmission
Sensors:
Pressure
DL34-00
2 in to 4.1 ft (5 cm to 1.25m)
0.125 in (3 mm)
Soft Starters
Sensors:
Current
DLx4 Series Technical Specifications
Model
Price
Range
Accuracy
Resolution
Sensing Dead Band*
Beam Width
Configuration
Memory
Loop Supply Voltage
Consumption
Loop Resistance
Signal Output
Signal Invert
Loop Fail-Safe
Contact Type
Contact Ratings
Contact Fail-Safe
Hysteresis
Process Temperature
Temp. Compensation
Ambient Temperature
Pressure
Enclosure Rating
Enclosure Material
Strain Relief Material
Transducer Material
Cable Jacket Material
Cable Type
Cable Length
Process Mount
Mount Gasket
Weight (lbs)
Classification
Compliance
Agency Approvals
Drives
Motors
• Switch and control functions with continuous level measurement
analog output up to 4.1 ft (1.25m), 9.8 ft (3m) or 18 ft (5.5m)
•Configuration is fast and easy via WebCal software and USB adapter
• Narrow beam width and short dead band optimized for small tanks
• 4-20 mA signal output and four programmable relays rated at
1A / 60VA for switch, pump or valve control and fail-safety
- 1 pump or valve with 3 alarms
- 2 pumps (lead-lag) with 2 alarms
- 2 pumps (duplexing) with 2 alarms
- 4 independent outputs
• PVDF transducer and NEMA Type 6P polycarbonate enclosure for
corrosive liquids, UV stable for outdoor use
• Automatic temperature compensation for accurate measurement
• Made in the USA
Agency Approvals
Part No. DL14-00
Company
Information
Book 2 (14.1)
Level Sensors
eLE-9
Appendix
Book 2
Terms and
Conditions
Prices as of April 15, 2015. Check Web site for most current prices.
EchoPod DL Series Multi-Function
Ultrasonic Liquid Level Sensors
Dimensions
inches [mm]
DL14-00
DL24-00
When installing the 1 inch NPT level sensors care should be used to mechanically isolate the sensor housing from the tank. This
can easily be done by using any of the Flowline mounting accessories which are designed to provide the isolation needed.
DL34-00
Configuration
The settings for the the DL series are configured with free
WebCal software (downloadable from AutomationDirect Web
site) and an LI99-1001 Fob USB adapter (purchased separately).
RED
GREEN
WHITE
BLACK
PART NO.: LI99-1001
See the end of the Ultrasonic Level Sensor Section for further details and
Accessories
Wiring
Red
Blk
Wht
Grn
Blu
Org
Yel
Pur
Brn
-
Power
Power Return or 4-20mA Loop Output
TX (Out)
RX (In)
Rly 1
Rly 2
Rly 3
Rly 4
Rly Com
Book 2 (14.1)
eLE-10
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
PodView® Digital Level Indicator
Company
Information
Drives
Overview
Soft Starters
The PodView digital level indicator is a low cost general purpose indicator that
displays engineering units for level or volume when combined with an EchoPod
ultrasonic sensor that has been configured with WebCal 6.0 / firmware 50.0 or
higher. The LI40 can be field mounted for local indication as well as be used
to make simple setting changes to the sensor. PodView displays sensor output
and can reconfigure sensor set points on the fly without needing to connect to
a PC. PodView shares power with the EchoPod sensor and does not require any
additional separate power supply.
LI40-1001 Technical Specifications
Price
Display (Engineering Units)
Character Height
Linearization
Level or Volume
0.374 in (9.5 mm)
per sensor configuration
User Interface
Input
Three button
EchoPod sensor family
Memory
Non-volatile
Supply Voltage
12-28 VDC power shared with
sensor (EchoPod not to exceed
28 VDC)
Operating Temperature
-4°F to 140°F (-20°C to 60°C)
Cable Type
4-conductor, 22 AWG (0.33 mm²)
Cable Length
4 ft (1.2m)*
Cable Jack Material
Polyurethane
Enclosure Rating
Agency Approvals
Dimensions
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Stacklights
Signal
Devices
Silicon rubber
Process
General purpose
Relays and
Timers
0.6
CE, RoHS
Pneumatics:
Air Prep
* Maximum distance between EchoPod sensor and PodView
display is 15 ft (4.5m)
Configuration
The settings for the the EchoPod series are configured with
free WebCal software (downloadable from AutomationDirect
Web site) and an LI99-1001 Fob USB adapter (purchased
separately). To be compatible with PodView the EchoPod
sensor must be configured with WebCal 6.0 / firmware 50.0
or higher.
Sensors:
Photoelectric
Pushbuttons
and Lights
Panel
Button Material
Motor Controls
Sensors:
Flow
inches [mm]
Polycarbonate
Enclosure Mount
Motion: Servos
and Steppers
Sensors:
Level
• CE
NEMA 4 (IP65) faceplate
Enclosure Material
Classification
Weight (lbs)
Compliance
• Operates with all EchoPod level sensors compatible with WebCal 6.0 software /
firmware 50.0 or higher
• No separate power supply required
• Use PodView to make simple adjustments to EchoPods sensor settings
• Provides level indication up to 15 feet from sensor
• Corrosion resistant NEMA 4 / IP65 enclosure
• No configuration required for the display. Simply wire the display directly to a
programmed compatible EchoPod sensor
• Display can be transferred from sensor to sensor without any configuration changes to
the display
• Make quick setpoint changes without the need to connect sensor back to a PC
• Made in the USA
LCD, 6-digit with 4 relay
indicators
Display Type
Power
Transmission
Sensors:
Proximity
Features
$181.00
Motors
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Wiring
Pneumatics:
Tubing
Red
4-20 mA
load
Pneumatics:
Air Fittings
Blk
if applicable
RED
GREEN
WHITE
BLACK
EchoPod®
Wht
Wht
Grn
Blu
Org
Yel
Pur
Brn
Grn
Appendix
Book 2
PodView®
PART NO.: LI99-1001
Note: M
aximum distance between EchoPod sensor
and PodView display is 15 ft. (4.5m)
See the WebCal software catalog page in this section for further details
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-11
Terms and
Conditions
Prices as of April 15, 2015. Check Web site for most current prices.
EchoSonic II LU Series Ultrasonic
Liquid Level Transmitters
Overview
Features
• Continuous level measurement up to 9.8 ft (3m), 18 ft (5.5m), 26.2 ft
(8m) or 32.8 ft (10m)
• DSP auto adaptive filters enable plug and play operation
optimizing signal output filtering and obstacle recognition
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2 inch or 3 inch beam width for applications with limited
measurement space
• Short 4 inch or 8 inch dead band maximizes the measurable
filling capacity of the tank
• PVDF transducer and NEMA Type 6P polycarbonate enclosure for
corrosive liquids, UV stable for outdoor use
• Automatic temperature compensation for accurate measurement
• Made in the USA
The EchoSonic II LU Series ultrasonic liquid level transmitters provide continuous level measurement up to 9.8 ft (3m),
18 ft (5.5m), 26.2 ft (8m) or 32.8 ft (10m), with a 4-20mA
signal output, and are configured via WebCal software. This
non-contact liquid level sensor is ideally suited for corrosive,
ultrapure, sticky or dirty liquids, and is broadly selected for bulk
storage, dry tank, lift station and process tank level applications.
Agency Approvals
• cFMus
Part No. LU27
Part No. LU23/28/29
LU20 Series Technical Specifications
Model
Price
Range
Accuracy
Resolution
Sensing Dead Band*
Beam Width
Configuration
Memory
Loop Supply Voltage
Consumption
Loop Resist
Signal Output
Signal Invert
Signal Fail-Safe
Process Temperature
Temp. Compensation
Ambient Temperature
Pressure
Enclosure Rating
Enclosure Material
Transducer Material
Cable Jacket Material
Cable Type
Cable Length
LU27-00
LU23-00
LU28-00
$469.00
$562.00
$655.00
LU29-00
$748.00
4 in to 9.8 ft (10 cm to 3m)
8 in to 18.0 ft (20 cm to 5.5m)
8 in to 26.2 ft (20 cm to 8m)
8 in to 32.8 ft (20 cm to 10m)
0.019 in (0.5 mm)
0.039 in (1 mm)
± 0.2% of range
0.079 in (2 mm)
4 in (10.2 cm)
8 in (20.3 cm)
2 in (5.1 cm)
3 in (7.6 cm)
WebCal Free Software and LI99-1001 Fob USB Adapter
Non-volatile
14 - 28 VDC1
0.5W
500Ω @ 24 VDC
4-20 mA, two-wire
4-20 mA or 20-4 mA
4 mA, 20 mA, 21 mA, 22 mA or hold last
-4° to 140°F (-20° to 60°C)
Automatic
-31° to 140°F (-35° to 60°C)
MWP = 30 PSI (2 bar)
NEMA Type 6P, IP67, encapsulated, corrosion resistant & submersible, UV stable
Polycarbonate
Polyvinylidene Flouride
Polyurethane
4-conductor, shielded
10 ft (3m)
Process Mount
1 in MNPT (See accessories for
installation fittings)
2 in MNPT (See accessories for installation fittings)
Mount Gasket
Viton (included, replacement part
number 200128)
Viton (included, replacement part number 200129)
Weight (lbs)
Classification
Compliance
Agency Approvals
1.4
1.8
1.8
1.8
General purpose
CE, RoHS
cFMus
* Dead band is the minimum distance the sensor must be mounted above the max liquid level.
1
If supply exceeds 28 VDC damage to the transmitter may occur.
Book 2 (14.1)
eLE-12
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
EchoSonic II LU Series Ultrasonic
Liquid Level Transmitters
Dimensions
Company
Information
Drives
Soft Starters
Motors
inches [mm]
Power
Transmission
LU20 Series
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Dimensions
LU27
LU23, 28, & 29
A
B
C
D
E
F
G
2.71 [68.9] 4.00 [101.7] 4.10 [104.1] 3.10 [78.8] 2.75 [69.7] 1.70 [43.1] 1.10 [28.0]
4.31 [109.6] 4.00 [101.7] 4.10 [104.1] 3.10 [78.8] 2.75 [69.7] 3.30 [83.8] 2.70 [68.7]
Sensors:
Flow
H
1” MNPT
2” MNPT
Pushbuttons
and Lights
When installing the 1” NPT level sensors care should be used to mechanically isolate the sensor housing from the tank. This
can easily be done by using any of the Flowline mounting accessories which are designed to provide the isolation needed.
Wiring
LU27
Stacklights
LU23, LU28, LU29
Signal
Devices
Process
Power - Red
Return (4-20 mA loop output) - Black
Tx (out) - Green
Rx (in) - White
Power - Red
Return (4-20 mA loop output) - Black
Rx (in) - White
Tx (out) - Green
Relays and
Timers
Shield
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Configuration
Pneumatics:
Air Fittings
Appendix
Book 2
RED
GREEN
WHITE
BLACK
The settings for the the LU series
are configured with free WebCal
software (downloadable from
AutomationDirect Web site) and
an LI99-1001 Fob USB adapter
(purchased separately).
Terms and
Conditions
PART NO.: LI99-1001
See the end of the Ultrasonic Level Sensor Section for further details and Accessories
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-13
Prices as of April 15, 2015. Check Web site for most current prices.
WebCal Ultrasonic Level
Sensor Software and USB Fob
Adapter
Overview
System Requirements
WebCal PC software is a utility program that allows users to
easily configure their EchoSonic II and EchoPod level transmitters, switches, and controllers. Download your free copy
of WebCal at www.AutomationDirect.com, and connect your
sensor through the Fob USB adapter (LI99-1001). Develop your
configuration using pre-programmed function menus as the tank
graphic and set point fields automatically change to match your
configuration. Then, input your level set point values and click
the Write to Unit button. Your configuration will be downloaded
into the sensor and verified in less than a second. Last, click
the Wiring Diagram button to open a wiring schematic of your
configuration in PDF format. Print the document, disconnect the
sensor and wire it per the schematic. It’s that simple.
• Windows XP, Vista, 7, 8 (WebCal 6.0 only)
®
• 32 or 64 bit system
• 1 USB 2.0 Port
®
• 10 Mb hard disk space
• 256 Mb RAM
Features
Configuration files can be named, saved, emailed, printed,
opened and used again under revision control. The advanced
feature page enables you to change the measurement signal,
output filtering and invert relay states from N.O. to N.C. As
new software or firmware becomes available, they can be
downloaded and updated through WebCal.
• 169 configurations with pull-down menu selections
• Graphical interface lets you visualize your configuration
• Applicable level set point fields appear automatically
• Installs and tests configuration in less than a second
• Available PDF wiring diagram for each configuration
• Technical help menu with FAQs, tips and glossary
• Rapidly program sensors to the same configuration
• Save configuration files for future use or reference
• Print wiring diagrams and configuration text files
• Email configuration files to other remote users
• Made in the USA
WebCal Ultrasonic Level Sensor Software and USB Adapter
Part No.
Item Photo
Description
Quantity Weight (lbs)
Price
LI99-1001
Flowline Fob USB adapter, required for use with WebCal software to configure Flowline EchoPod and
EchoSonic II ultrasonic level sensors.
1
0.1
$42.00
WEBCAL
Configuration software CD for Flowline EchoPod and EchoSonic II ultrasonic level sensors (also available
as a free download from the AutomationDirect Web site). Requires an LI99-1001 Fob USB adapter (purchased separately).
1
0.1
$9.00
EchoPod Configuration
EchoSonic II Configuration
Book 2 (14.1)
eLE-14
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Echotouch™, EchoSpan® &
EchoSwitch® Ultrasonic Liquid
Level Sensors
The Echotouch, EchoSpan and EchoSwitch are innovative
ultrasonic liquid level sensor families that replace float,
conductance and pressure sensors that fail due to contact with
dirty, sticky and scaling media in small, medium and large
capacity tanks. Applied in chemical, water and wastewater
applications, these general purpose non-contact sensors are
available with single and multi-function capabilities including
continuous level measurement, switching and control.
For input to a PLC or other controller, measurement outputs
include current, voltage and frequency. Models with three
relays can be configured for level alarms and/or stand-alone
level control such as automatic fill or empty functions using the
embedded level controller. Units are easily configured using
built -in pushbuttons.
Range
$864.00
$604.00
Pressure
LU83-5101
LU84-5101
LU77-5004
LU74-5004
LU78-5004
$697.00
$790.00
$883.00
$697.00
$744.00
$790.00
EchoSpan
Intrinsically safe
6 in to 18 ft
(15 cm to 5.5m)
EchoSwitch
General Purpose (non-hazardous)
4 in to 9.8 ft
(10 cm to 3m)
Output Types
Install
Mounting
Relays
Configuration
Ambient
Temperature
Process
Temperature
LU81-5101
Echotouch
8 in to 18 ft
(20 cm to 5.5m)
8 in to 26.2 ft
(20 cm to 8m)
12 in to 32.8 ft
(30 cm to 10m)
4 in to 9.8 ft
(10 cm to 3m)
8 in to 18 ft
(20 cm to 5.5m)
8 in to 26.2 ft
(20 cm to 8m)
(1) SPDT relay, (2) SPST relays
4-20 mA, two-wire
4-20 mA, two-wire
1 in MNPT
2 in MNPT
1 in MNPT
No relay
2 in MNPT
Pushbutton / LCD
-40° to 160°F (-40° to 71°C)
-40° to 140°F
(-40° to 60°C)
-4° to 140°F (-20° to 60°C)
30 PSI (2 bar) @
25°C, derated @
1.667 psi (0.113
bar) per °C above
25°C (77°F)
30 PSI (2 bar) MAX
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Signal
Devices
(1) SPDT relay, (2) SPST relays
-4° to 140°F
(-20° to 60°C)
Pushbutton Configuration
Motors
Stacklights
Vertical, top of tank
2 in MNPT
Soft Starters
Sensors:
Pressure
Echotouch, EchoSpan & EchoSwitch Ultrasonic Liquid Level Sensors General Specifications
LU20-5001-IS LU80-5101
Drives
Power
Transmission
Overview
Model
Price
Type
Class
Company
Information
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Example - EchoSpan Display and Menu
With no software or PC required, the Echotouch, EchoSpan, and
EchoSwitch ultrasonic level sensors are easily configured using
integral pushbuttons and LCD digital display. Configuration
parameters are organized in a simple menu structure so that
parameter values are easily accessed and set or changed as
needed. Parameters are stored in non-volatile memory so the
setting values are not lost when the sensor is powered down,
allowing configuration before installation in the field.
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Pneumatics:
Cylinders
Level Sensors
eLE-15
Prices as of April 15, 2015. Check Web site for most current prices.
Echotouch™ LU20 Ultrasonic
Level Transmitter
Overview
Features
The Echotouch LU20 ultrasonic level transmitter is
CSA approved for intrinsically safe applications. The
two-wire ultrasonic transmitter provides non-contact
measurement up to 18 ft (5.5m) and is ideally suited
for corrosive, slurry or waste liquids. The transmitter
is typically selected for atmospheric bulk storage,
day tank and waste sump applications located
within a classified hazardous area. Media examples include diesel fuel and hydrochloric acid. The
transmitter is calibrated in less than a minute using
the LCD display, 4-button interface and intuitive
calibration menu. All user setpoints are held in nonvolitile memory. In the event of acoustic signal loss,
the transmitter will hold the current output at the user
designated safe state.
Part No. LU20-5001-IS
• LCD digital display indicates level in inches or
centimeters
• Polypropylene enclosure rated NEMA 4X / IP65 with
rugged Kynar transducer
•Simple pushbutton calibration for all user setpoints
• Adjustable dead band and range filters eliminate
false echo returns
Agency Approvals
• CSA: Class I, Groups A, B, C & D; Class II, Groups E, F
and G; Class III; T3C
LU20-5001-IS Technical Specifications
Price
Range
Accuracy
Resolution
Sensing Dead Band*
Beam Width
Configuration
Display Type
Display Units
Memory
Loop Supply Voltage
Loop Resistance
Signal Output
Signal Invert
Loop Fail-Safe
Calibration
Process Temperature
Ambient Temperature
$864.00
6 in to 18 ft (15 cm to 5.5m)
w 0.25% of span in air
0.125 in (3 mm)
6 in (15 cm)
8° conical
Pushbutton / LCD
LCD, 4-digit
Inch or cm
Non-volatile
12 - 32 VDC
600Ω max @ 24 VDC, 900Ω max @ 32 VDC
4-20 mA, two-wire
4-20 mA or 20-4 mA
4 mA, 22 mA or hold last
digital, pushbutton, LCD
-4° to 140°F (-20° to 60°C)
-4° to 140°F (-20° to 60°C)
30 psi @ 77°F, derated @ 1.667 psi per 1.8°F above 77°F
(2 bar @ 25°C, derated @ 0.113 bar per 1°C above 25°C)
Pressure
Enclosure Rating
Installed Height
Enclosure Material
Transducer Material
Process Mount
Terminal Block
Conduit Entrance
Weight (lbs)
Classification
Agency Approvals
I.S. Parameters
NEMA 4X (IP65)
Beam Cone Data
The “Beam Cone” is the amount in which
the ultrasonic wave increases in diameter (Radius²) as the wave travels away
from the sensor. This is important to note
during installation to prevent objects in the
tank from providing false echoes.
Depth
(feet)
1
3
5
7
9
11
13
15
17
19
Radius Radius
(inches) (cm)
1.2
3.1
2.9
7.3
4.6
11.6
6.2
15.9
7.9
20.1
9.6
24.4
11.3
28.7
13.0
32.9
14.6
37.2
16.3
41.3
5.1 in (13 cm) above tank process mount
Polypropylene, UL94VO
Polyvinylidene Flouride, Kynar
2 in MNPT (See accessories for installation fittings)
26-12 AWG (tighten torque, 0.4 Nm), removable
Single, 1/2 in FNPT
2.2
Intrinsically safe (Haz-Loc)
CSA: Class I, Groups A, B, C & D; Class II, Groups E, F and G; Class III; T3C,
CE, RoHS
CSA Vmax < 32.0 V; Imax < 130 mA; Ca = 0 µF; La = 0 µH
Certificates
CSA: LR79326-10
Compliance
CE: EN 50082-2 immunity, EN 55011 emission
(Recommended I.S. barrier MTL7706+)
* Dead band is the minimum distance the sensor must be mounted above the max
liquid level.
D
R
Book 2 (14.1)
eLE-16
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Echotouch™ LU20 Ultrasonic
Level Transmitter
Wiring
Typically loop
powered indicator
(+)
(-)
DC Power
Supply
Echotouch™
-
-
Drives
Soft Starters
Dimensions
Motors
inches [mm]
Power
Transmission
12-32 VDC
+
Company
Information
Motion: Servos
and Steppers
+
Ultrasonic Level Transmitter
Motor Controls
MENU
Sensors:
Proximity
SET
Sensors:
Photoelectric
(+)
(-)
Sensors:
Encoders
Echotouch™
Sensors:
Limit Switches
Ultrasonic Level Transmitter
MENU
SET
Sensors:
Current
C
Sensors:
Pressure
Control Drawing
NON-HAZARDOUS LOCATION
Class I, Div I, Groups A, B, C & D
Sensors:
Level
Model LU20
I.S. Barrier
Ultrasonic
Level Transmitter
Vdc ≤ 32.0 V
Isc ≤ 130 mA
Ca ≥ 0 µF
La ≥ 0 µH
Supply
Sensors:
Temperature
HAZARDOUS LOCATION
Sensors:
Flow
Vmax = 32.0 V
Imax = 130 mA
Ci ≈ 0 µF
Li ≈ 0 µH
Pushbuttons
and Lights
Stacklights
Control drawing for the LU20-5001-IS ultrasonic level transmitter
approved under the entity concept as an I.S. apparatus
Signal
Devices
Control Drawing: LU20CD
Rev. 7-24-97
Process
For use in
Hazardous Locations:
Class I, Groups A, B, C & D
Class II, Groups E, F & G
Class III
Temperature Code: T3C
Intrinsically Safe when used with
an approved I.S. barrier. Entity
Parameters
= 32.0 VDC
Vmax
Imax
= 130 mA
= 0 µF
Ci
Li
= 0 µH
Warning: Suitable for Class I, Groups A, B,
C & D; Class II, Groups E, F & G; Class III,
T3C; when used with an approved I.S.
barrier. Substitution of components may
impair intrinsic safety LU20-50X1-IS
requirements for Intrinsically Safe
operation
Maximum Temperature/Voltage Derating
Continuous 20 mA Curve (LU20-50_1)
100
Unacceptable
Range
80
60
Acceptable
Range
40
20
0
12
16
20
24
28
32
36
Unacceptable
Range
500
Acceptable
Range
250
0
12
16
20
24
28
Supply Volyage (VDC)
32
Pneumatics:
Directional Control
Valves
80
60
Pneumatics:
Cylinders
Acceptable
Range
40
20
0
12
16
20
24
28
32
Pneumatics:
Tubing
36
Operating Voltage (VDC)
Flowline 4 or 20 mA
LU20-50_1 Electrical Loading Limits
750
Pneumatics:
Air Prep
Unacceptable
Range
Operating Voltage (VDC)
1,000
Relays and
Timers
Maximum Temperature/Voltage Derating
Continuous 20 mA Curve (LU20-50_1-IS)
100
Ambient Sensor Temperature (°C)
NRTL/C
Intrinsically Safe/
Securite Intrinseque
Exia
36
Max. Series Resistance (Ohms)
LR79326-10
Ambient Sensor Temperature (°C)
®
Temperature and Resistance
Derating Charts
Max. Series Resistance (Ohms)
CSA Label
1,000
Pneumatics:
Air Fittings
Flowline 4 or 20 mA
LU20-50_1-IS Electrical Loading Limits
Appendix
Book 2
Unacceptable
Range
750
500
0
Terms and
Conditions
Acceptable
Range
250
12
16
20
24
28
Supply Volyage (VDC)
32
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-17
Prices as of April 15, 2015. Check Web site for most current prices.
EchoSpan® LU Series Ultrasonic
Level Transmitters
Overview
Features
• 4 measurement ranges from 9.8 ft (3m) to 32.8 ft (10m)
• Configuration is simple via integral pushbutton display module
• LCD display indicates level in inches, centimeters and percentages
• Narrow 2 inch or 3 inch beam width for applications with limited
measurement space
• Fail-safe intelligence and diagnostic feedback for simple
troubleshooting
• PVDF transducer and NEMA 4X / IP65 polycarbonate enclosure for
corrosive liquids
• Automatic temperature compensation for accurate measurement
• Made in the USA
The EchoSpan LU series ultrasonic level transmitters provide
continuous level measurement up to 32.8 ft (10m) with a 4-20 mA
signal output, and is configured via its integral pushbutton display
module. This non-contact liquid level sensor is ideally suited for
corrosive, ultrapure, sticky or dirty liquids, and is broadly selected
for bulk storage, day tank, lift station and process tank level
applications.
Part No. LU80-5101
Part No. LU81-/83/84-5101
LU80 Series Technical Specifications
Model
Price
Range
Accuracy
Resolution
Sensing Dead Band*
Beam Width
Configuration
Memory
Display Type
Display Units
Supply Voltage
Loop Resistance
Signal Output
Signal Invert
Signal Fail-Safe
Terminal Block
Process Temperature
Temp. Compensation
Ambient Temperature
Pressure
Enclosure Rating
Enclosure Material
Enclosure Hardware
Enclosure Vent
Conduit Entrance
Transducer Material
LU80-5101
LU81-5101
LU83-5101
$604.00
$697.00
$790.00
LU84-5101
$883.00
4 in to 9.8 ft (10 cm to 3m)
8 in to 18 ft (20 cm to 5.5m)
8 in to 26.2 ft (20 cm to 8m)
12 in to 32.8 ft (30 cm to 10m)
± 0.2% of range
0.019 in (0.5 mm)
0.039 in (1 mm)
4 in (10 cm)
8 in (20 cm)
2 in (5.1 cm)
0.078 in (2 mm)
12 in (30 cm)
3 in (7.6 cm)
Pushbutton / LCD
Non-volatile
LCD, 6-digit
Inch, cm and percent
12 - 28 VDC**
500Ω @ 24 VDC
4-20 mA, two-wire
4-20 mA or 20-4 mA
4 mA, 20 mA, 21 mA, 22 mA or hold last
26-12 AWG (tighten torque, 0.5 Nm)
-4° to 140°F (-20° to 60°C)
Automatic
-40° to 160°F (-40° to 71°C)
30 PSI (2 bar) MAX
NEMA Type 4X (IP65)
Polycarbonate
Brass & stainless steel
Water tight membrane
Dual, 1/2 in FNPT
Polyvinylidene Flouride
Process Mount
1 in MNPT (See accessories for
installation fittings)
2 in MNPT (See accessories for installation fittings)
Mount Gasket
Viton (included, replacement part
number 200128)
Viton (included, replacement part number 200129)
Weight (lbs)
Classification
Compliance
1.5
1.9
General purpose
CE, RoHS
* Dead band is the minimum distance the sensor must be mounted above the max liquid level.
** If supply exceeds 28 VDC damage to the transmitter may occur.
Book 2 (14.1)
eLE-18
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
EchoSpan® LU Series Ultrasonic
Level Transmitters
Dimensions
Configuration
LU80 Series
The transmitter is configured using
the three buttons (UP, DOWN and
SELECT) and the transmitter’s LCD
on the transmitters face.
inches [mm]
Company
Information
Drives
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
More information about configuring
the LU series sensors can be found at
www.AutomationDirect.com
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Dimensions
LU80
LU81, 83 & 84
A
B
C
3.90 [99.1] 4.10 [104.1] 5.20 [132.1]
5.50 [139.6] 4.10 104.1] 5.20 [132.1]
D
E
F
G
H
3.10 [78.8]
3.10 [78.8]
2.80 [71.1]
2.80 [71.1]
1.90 [48.3]
3.40 [86.4]
1.25 [31.8]
2.70 [68.6]
1 in MNPT
2 in MNPT
Pushbuttons
and Lights
Stacklights
When installing the 1 inch NPT level sensors care should be used to mechanically isolate the sensor housing from the tank. This
can easily be done by using any of the Flowline mounting accessories which are designed to provide the isolation needed.
Signal
Devices
Wiring
Process
Typical Loop Powered Display
Typical Generic PLC
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
C
4
3
Pneumatics:
Cylinders
2
1
Pneumatics:
Tubing
Pneumatics:
Air Fittings
EchoSpan
Appendix
Book 2
EchoSpan
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-19
Prices as of April 15, 2015. Check Web site for most current prices.
EchoSwitch® LU Series Ultrasonic
Level Sensors
Overview
Features
The EchoSwitch LU series of ultrasonic level sensors are configured
via the integral pushbutton display module, provides continuous
level detection up to 26.2 ft (8m) with 3 programmable relays
for level switch or level control functions and a 4-20 mA output.
Each relay can be configured on a single setpoint (high level alarm
or low level alarm) or latched on two setpoints for automatic fill
or empty in simplex (one pump or valve), duplex (two pumps) or
triplex (three pumps) level control modes with selectable time delay
and fail-safe logic. The embedded level controller can lower cost
by replacing external control hardware. These non-contact level
sensors are ideally suited for corrosive, sticky or dirty liquids, and
are broadly selected for pump lift station, sump and day tank level
applications.
Features
• 3 level detection ranges: 9.8 ft (3m), 18.0 ft (5.5m) and 26.2 ft (8m)
• Configuration is simple via integral pushbutton display module
• Three programmable relays for switch, pump control and fail-safety
- 1 pump or valve with 2 alarms
- 2 pumps (lead-lag) with 1 alarm
- 2 pumps (duplexing) with 1 alarm
- 3 independent outputs
• 4-20 mA output can be used to provide local or remote level detection
• LCD display indicates level height in engineering units and relay status
• Narrow 2 inch or 3 inch beam width for applications with limited measurement space
• Short 4 inch or 8 inch dead band maximizes the measureable filling
capacity of the tank
• PVDF transducer and NEMA 4X / IP65 polycarbonate enclosure for corrosive liquids
• Automatic temperature compensation
• Made in the USA
LU70 Series Technical Specifications
Model
Price
Range
Repeatability
Loop Output
Loop Resistance
Sensing Dead Band*
Beam Width
Configuration
Memory
Display Type
Display Units
LCD Indication
Supply Voltage
Power
Contact Type
Contact Rating
Terminal Block
Contact Fail-Safe
Process Temperature
Temp. Compensation
Ambient Temperature
Pressure
Enclosure Rating
Enclosure Material
Transducer Material
Enclosure Hardware
Enclosure Vent
Conduit Entrance
Part No. LU77-5004
Part No. LU74-5004
Part No. LU78-5004
LU77-5004
LU74-5004
LU78-5004
$697.00
4 in to 9.8 ft (10 cm to 3m)
$744.00
$790.00
8 in to 18 ft (20 cm to 5.5m)
8 in to 26.2 ft (20 cm to 8m)
0.25 in (6.35 mm)
4-20 mA isolated, sinking 12 to 28 VDC**
500Ω max @ 24 VDC
4 in (10 cm)
8 in (20 cm)
2 in (5.1 cm)
3 in (7.6 cm)
Pushbutton / LCD
Non-volatile
Level and relay status, 6 character
Inch, cm, percent, feet or meter
Level and relay status
95 to 250 VAC (separate 12-28 VDC power supply required for 4-20 mA loop output)
20W @ 120 VAC
Relay 1, SPDT relay; Relay 2 & 3, SPST, N.O., all commons connected together
2A @ 30 VDC max / 2A @ VAC max
22-14 AWG (tighten torque, 0.5 Nm)
Programmable / selectable
-4° to 140°F (-20° to 60°C)
Automatic
-40° to 160°F (-40° to 71°C)
30 PSI (2 bar) MAX
NEMA Type 4X (IP65)
Polycarbonate
Polyvinylidene Flouride
Brass & stainless steel
Water tight membrane
Dual, 1/2” FNPT
Process Mount
1 in MNPT (See accessories for
installation fittings)
2 in MNPT (See accessories for installation fittings)
Mount Gasket
Viton (included, replacement part number 200128)
Viton (included, replacement part number 200129)
Weight (lbs)
Classification
Compliance
1.5
2.0
General purpose
CE, RoHS
* Dead band is the minimum distance the sensor must be mounted above the max liquid level.
Book 2 (14.1)
eLE-20
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
EchoSwitch® LU Series Ultrasonic
Level Sensors
Company
Information
Drives
Soft Starters
Dimensions
Configuration
LU70 Series
The transmitter is configured using
the three buttons (UP, DOWN and
SELECT) and the transmitter’s LCD
on the transmitters face.
Power
Transmission
More information about configuring
the LU series sensors can be found at
www.AutomationDirect.com
Motor Controls
inches [mm]
Motors
Motion: Servos
and Steppers
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Dimensions
LU74 & LU78
LU77
A
B
C
D
E
F
G
5.50 [139.6] 4.10 [104.1] 5.20 [132.1] 3.10 [78.8] 2.80 [71.1] 3.50 [89.0] 2.70 [89.0]
3.90 [99.1] 4.10 [104.1] 5.20 [132.1] 3.10 [78.8] 2.80 [71.1] 1.90 [48.3] 1.25 [31.8]
H
Pushbuttons
and Lights
2” MNPT
1” MNPT
Stacklights
When installing the 1” NPT level sensors care should be used to mechanically isolate the sensor housing from the tank. This can
easily be done by using any of the Flowline mounting accessories which are designed to provide the isolation needed.
Signal
Devices
Wiring
Relay Application
Process
Loop Application
Relays and
Timers
Pneumatics:
Air Prep
User Supplied
95 to 250 VAC
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Note: Isolate power to instrument from power to load (pumps, etc.) as
much as possible by running power to the sensor directly from main
power source. All relay commons are internally connected.
Note: Separate 12-28 VDC power
supply is required for loop output.
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-21
Prices as of April 15, 2015. Check Web site for most current prices.
Ultrasonic Liquid Level Sensor
Accessories
Ultrasonic Liquid Level Sensor Accessories
Part No.
Item Photo
Description
Quantity
Weight
Price
LI40-1001
Flowline PodView general purpose digital indicator, displays tank level or volume and sensor relay status,
6-digit LCD display with four relay status indicators, 3-button user interface, polycarbonate panel mount
enclosure with NEMA 4 (IP65) faceplate, 6-foot (1.8-meter) 22AWG 4-conductor cable, compatible with
any Flowline EchoPod series ultrasonic level sensor with firmware V50 or later
1
0.6
$181.00
LM50-1001
Flowline side mount bracket, 2 inch NPT female threads, polypropylene (PP), for use with Flowline DL34,
LU20, LU23, LU28, LU29, LU74, LU78, LU81, LU83, and LU84 series ultrasonic level sensors
1
0.4
$32.00
LM50-1001-1
Flowline side mount bracket, 2 inch NPT female threads, polypropylene (PP), and 2 inch NPT male x 1
inch NPT female reducer bushing (PVC), for use with Flowline DL14, DL24, DS14, DL10, DX10, LU27,
LU77, and LU80 series ultrasonic level sensors
1
0.6
$41.00
LM52-1400
Flowline reducer bushing, 2 inch NPT male x 1 inch NPT female threads, PVC, for use with Flowline DL14,
DL24, DS14, DL10, DX10, LU27, LU77, and LU80 series ultrasonic level sensors
1
0.2
$13.00
LM52-2400
Flowline reducer bushing, 3 inch NPT male x 2 inch NPT female threads, PVC, for use with Flowline DL34,
LU20, LU23, LU28, LU29, LU74, LU78, LU81, LU83, and LU84 series ultrasonic level sensors
1
0.6
$26.00
LM52-1890
Flowline low-profile bulkhead fitting, 1 inch NPT female x slip socket, with mounting nut, PVC, for use with
Flowline DL14, DL24, DS14, DL10, DX10, LU27, LU77 and LU80 series ultrasonic level sensors
1
0.5
$37.00
LM52-2890
Flowline low-profile bulkhead fitting, 2 inch NPT female x slip socket, with mounting nut, PVC, for use
with Flowline DL34, LU20, LU23, LU28, LU29, LU74, LU78, LU81, LU83, and LU84 series ultrasonic level
sensors
1
1.2
$60.00
LM52-1850
Flowline mounting flange, 1 inch NPT female threads, PVC, for use with Flowline DL14, DL24, DS14,
DL10, DX10, LU27, LU77, and LU80 series ultrasonic level sensors
1
0.5
$41.00
LM52-2850
Flowline mounting flange, 2 inch NPT female threads, PVC, for use with Flowline DL34, LU20, LU23,
LU28, LU29, LU74, LU78, LU81, LU83, and LU84 series ultrasonic level sensors
1
1.0
$60.00
204038
Replacement mounting gasket, for use with Flowline DL14, DL10, DX10, and DS14 series ultrasonic level
sensors
1
0.1
$5.00
200128
Replacement mounting gasket, for use with Flowline DL24, LU27, LU77, and LU80 series ultrasonic level
sensors
1
0.1
$9.00
200129
Replacement mounting gasket, for use with Flowline DL34, LU23, LU28, LU29, LU74, LU78, LU81, LU83,
and LU84 series ultrasonic level sensors
1
0.1
$13.00
When installing the 1” NPT level sensors care should be used to mechanically isolate the sensor housing from the tank. This can easily
be done by using any of the Flowline mounting accessories which are designed to provide the isolation needed.
Dimensions
inches [mm]
LM50-1001
LM50-1001-1
Book 2 (14.1)
eLE-22
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Ultrasonic Liquid Level Sensor
Accessories
Dimensions
Drives
Soft Starters
Motors
inches [mm]
LM52-1400
Company
Information
Power
Transmission
LM52-2400
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
LM52-1890
Sensors:
Pressure
LM52-2890
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
LM52-1850
Relays and
Timers
LM52-2850
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-23
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Tek™ LU10 Ultrasonic
Level Switches
Overview
CSA approved for hazardous environments, the intrinsically safe ultrasonic point level switch provides reliable liquid level detection of chemical, solvent, hydrocarbon and petroleum based liquids with a 1A relay
output. The submersible polypropylene (PP) liquid level sensor is universally
mounted through the tank wall or inside the tank as a high level alarm or
low level alarm.
Features
Part No. LU10-1305
Part No. LU10-1405
Switch-Tek™ LU10 Technical Specifications
Model
LU10-1305
LU10-1405
Price
$255.00
$265.00
0.7
0.7
Weight (lb)
Insertion Length
0.7 in [17.8 mm]
Orientation
2.1 in [53.3 mm]
Universal
Accuracy
w1mm [0.04 in] in water
Repeatability
• CSA approved intrinsically safe for use in hazardous environments
• Submersible polypropylene (PP) sensor and cable
• 60VA relay selectable NO or NC via power supply wiring polarity
• Compatible with Switch-Pak installation fittings
• Able to mount through the side wall or top wall of tank
• Made in the USA
IP
68
Dimensions
inches [mm]
w0.5 mm [0.02 in] in water
Supply Voltage
12-36 VDC
Consumption
25mA maximum
Contact Type
(1) SPST relay
Contact Rating
General purpose: 60VA @ 1A (125VAC
max)
Intrinsically safe: 32VDC @ 0.5 A
Contact Output
Selectable NO / NC
Process Temp.
Part No.LU10-1305
-40°F to 176°F [-40°C to 80°C]
150psi [10bar] @ 25°C, derated @
1.667 psi [0.113 bar] per °C above 25°C
Pressure
Sensor Rating
NEMA 6 (IP68)
Sensor Material
PP (polypropylene)
Cable Jacket Material
PP (polypropylene)
Cable Type
4-conductor, #22AWG, shielded
Cable Length
10ft (3m)
Process Mount
3/4” NPT
Classification
Agency Approvals*
Part No.LU10-1405
See our website www.AutomationDirect.com for complete Engineering drawings.
Compatible Products
Intrinsically safe (Haz-Loc)
CSA: Class 1, Groups A, B, C, & D; Class II
Groups E, F & G; Class III
EEx: Class 1, Division 1,
Groups A, B, C, & D;
EEx ib IIC T6
Intrinsically Safe (I.S.)
Parameters
CSA: Vmax = 32V, Imax = 300mA,
Pmax = 1.3 W; Ci = 0µF, Li = 0µH
EEx: Ui = 32V; li = 300mA; Pi = 1.3 W;
Ci = 0µF; Li = 0µH
Certificates*
CSA: LR 79326; EEx: LCIE 01.E6048 X
Compliance*
CE (EN61326, EN61010-1)
* To obtain the most current agency approval information, see the
Agency Approval Checklist section on the specific part number’s
web page at www.AutomationDirect.com
Switch-Pro™
Remote Level Controllers
LCXX
Switch-Pro™
Switch-Pak ™
Junction Box and Strobe
LC06-1001
Installation Fittings
LM45-7001-0000
LC06-1001
with LC09-1004
and LM90-1001
LM45-1001-12
See the Switch-Pro® LCXX and Accessories pages at the end of
the section for further details and pricing.
Book 2 (14.1)
eLE-24
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Tek™ LU10 Ultrasonic
Level Switches
Intrinsically Safe (Haz-Loc) Wiring Information
Company
Information
Drives
Soft Starters
Motors
Power
Transmission
Models LU10:
Motion: Servos
and Steppers
The LU10 level switch has been approved for use in Class I,
Groups A, B, C & D; UNDER CERTIFICATE NUMBER LR 793264. The Entity parameter for the LU10 are:
Motor Controls
Sensors:
Proximity
Vmax = 32 VDC
Imax = 0.5 A
Ci = 0 µF
Li = 0 mH
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Intrinsically Safe Control Drawing:
NON-HAZARDOUS LOCATION
Associated
Equipement
HAZARDOUS LOCATION
Class I, Groups A, B, C & D
Class II, Groups E, F & G
Class III
Sensors:
Current
Sensors:
Pressure
Sensor Models
(see notes 1 and 4)
Sensors:
Temperature
LU10
Red Wire
Black Wire
Shield
Sensors:
Level
Entity Parameters
Vmax = 32V
Imax = 0.5A
Ci = 0
Li = 0
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Notes:
1. CSA certified associated equipment with entity parameters.
2. Vmax ≥ Voc, Imax ≥ Isc, Ci + C cable ≤ Ca., Li + L cable ≤ La.
3. Installation should be in accordance with CEC Part I, or
NFPA 70.
4. Associated equipment must be installed per manufacturers
instructions
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Sensor Drawing: LSD1
Rev. B 10-01-02
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/level-switches
Level Sensors
eLE-25
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Tek™ LU10 Ultrasonic
Level Switches
Intrinsically Safe (Haz-Loc) Wiring Information
Models LU10:
The LU10 level switch has been approved for use in Class I,
Division 1, Groups A, B, C & D; EEx ib IIC T6;
UNDER CERTIFICATE NUMBER LCIE 01.E6048X.
The Entity parameter for the LU10 are:
North America
Vmax = 32 VDC
Imax = 0.5 A
Pmax = 1.3 W
Ci = 0 µF
Li = 0 µH
Europe
Ui = 32 VDC
Ii = 0.5 A
Pi = 1.3 W
Ci = 0 µF
Li = 0 µH
Intrinsically Safe Control Drawing:
NON-HAZARDOUS LOCATION
HAZARDOUS LOCATION
Class I, Division1,
Groups A,B,C,D
EEx ib IIC T6
Associated
Equipment
Sensor Models
LU10-___5
Entity Parameters:
North America
Voc ≤ Vmax
Isc ≤ Imax
Ca ≥ Ci +Ccable
La ≥ Li +Lcable
Europe
Uo ≤ U i
Io ≤ I i
Co ≥ Ci +Ccable
Lo ≥ Li +Lcable
Entity Parameters:
North America
Vmax = 32V
Imax = 300 mA
Pmax = 1.3 W
Ci = 0 µF
Li = 0 µH
Europe
Ui = 32V
Ii = 300 mA
Pi = 1.3 W
Ci = 0 µF
Li = 0 µH
Red Wire
Black Wire
Shield
Sensor Drawing: U10900
Sheet 1 of 2
Rev. B 4-02-01
NON-HAZARDOUS LOCATION
Associated Equipment
Entity Parameters for 12-32 Lines:
Voc ≤ Vmax,
Isc ≤ Imax,
Ca ≥ Ci +Ccable,
La ≥ Li +Lcable,
Uo ≤ Ui
Io ≤ Ii
Co ≥ Ci +Ccable
Lo ≥ Li +Lcable
HAZARDOUS LOCATION
Class I, Division1,
Groups A,B,C,D
EEx ib IIC T6
Red Wire
Black Wire
Shield
Entity Parameters for Switch Outputs:
Voc ≤ Vmax,
Isc ≤ Imax,
Ca ≥ Ci +Ccable,
La ≥ Li +Lcable,
Uo ≤ Ui
Io ≤ Ii
Co ≥ Ci +Ccable
Lo ≥ Li +Lcable
Green Wire
White Wire
Sensor Models
LU10-___5
Entity Parameters for 12-32 Lines:
Vmax = 32V,
Imax = 300 mA,
Pmax = 1.3 W,
Ci = 0 µF,
Li = 0 µH,
Ui = 32V
Ii = 300 mA
Pi = 1.3 W
Ci = 0 µF
Li = 0 µH
Entity Parameters for Switch Outputs:
Vmax = 32V,
Imax = 500 mA,
Pmax = 1.3 W,
Ci = 0 µF,
Li = 0 µH,
Ui = 32V
Ii = 500 mA
Pi = 1.3 W
Ci = 0 µF
Li = 0 µH
Notes: PARAMETERS DEPEND ON OUTPUT TYPE
1. Installation should be in accordance with CEC Part 1, or NFPA 70. Sensor Drawing: U10900
Sheet 2 of 2
2. Associated Equipment shall be CSA certified with entity parameters
connected in accordance with manufacturers instructions.
Rev. B 4-02-01
Book 2 (14.1)
eLE-26
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Tek™ LZ12 Vibration
Fork Level Switch
Overview
Part No. LZ12-1405
Switch-Tek LZ12 Technical Specifications
Model
LZ12-1405
Price
$274.00
Weight (lb)
Insertion Length
Orientation
Accuracy
Repeatability
Supply Voltage
0.7
25mA maximum
Contact Type
(1) SPST relay
Contact Rating
60VA, 1A maximum (125VAC max)
Contact Output
Selectable NO / NC
Maint. Alarm
NPN transistor, 10mA maximum
Process Temp.
-40°F to 176°F [-40°C to 80°C]
Pressure
Sensor Rating
Sensor Material
Cable Grommet Material
Cable Jacket Material
Cable Type
Power
Transmission
Features
Sensors:
Photoelectric
• Automatic coating adjustment optimizes sensor performance
• Submersible Ryton® sensor with polypropylene (PP) cable for corrosive liquids
• Coating alarm proactively alerts user when cleaning is required
• 60VA relay selectable NO or NC via power supply wiring polarity
• Compatible with Switch-Pak installation fittings
• Ideal for coating/scaling liquids
• Mounts through side wall or top wall of tank
• Made in the USA
150psi [10bar] @ 25°C, derated @
1.667 psi [0.113 bar] per °C above 25°C
NEMA 6 (IP68)
Ryton® (glass filled)
Viton®
PP (polypropylene)
IP
68
10ft (3m)
Process Mount
3/4” NPT
Classification
General purpose
Compliance*
CE (EN61326, EN61010-1)
* To obtain the most current agency approval information, see the Agency
Approval Checklist section on the specific part number’s web page at
www.AutomationDirect.com
Motor Controls
Sensors:
Proximity
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Level
Sensors:
Flow
Dimensions
inches [mm]
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Part No.LZ12-1405
See our website www.AutomationDirect.com
for complete Engineering drawings.
Switch-Pro™
Remote Level Controllers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Compatible Products
Switch-Pro™
Switch-Pak ™
Junction Box and Strobe
Installation Fittings
5-conductor, #24AWG, shielded
Cable Length
Motion: Servos
and Steppers
Sensors:
Temperature
w1mm [0.04 in] in water
Consumption
Soft Starters
The general purpose vibration point level switch provides reliable liquid
level detection of dirty liquids such as those with light to medium coating,
scaling or foaming characteristics with a 1A relay output. Media examples
include wastewater, diluted caustic soda and light weight oil. For optimum
performance, the liquid level switch automatically adjusts for coating build
up and, if necessary, outputs a proactive maintenance alarm to request
cleaning. The submersible Ryton® liquid level sensor is universally mounted
through the tank wall or inside the tank as a high level or low level alarm.
Universal
12-30 VDC
Drives
Motors
2.3 in [57mm]
w0.5 mm [0.02 in] in water
Company
Information
Pneumatics:
Cylinders
Pneumatics:
Tubing
LCXX
LC06-1001
LC06-1001
with LC09-1004
and LM90-1001
LM45-7001-0000
LM45-1001-12
Appendix
Book 2
See the Switch-Pro® LCXX and Accessories pages at the end of
the section for further details and pricing.
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/level-switches
Level Sensors
Pneumatics:
Air Fittings
eLE-27
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Tek™ LP15 Capacitance
Level Switch
Overview
The general purpose guard capacitance point level switch provides reliable high or low liquid level detection of water based conductive liquids
with light coating, crystalizing or scaling characteristics with a 1A relay
output. Media examples include copper sulfate and brine. The RF guard
circuit eliminates the coating signal path between the active and reference
electrodes. The submersible polypropylene (PP) liquid level sensor is universally mounted through non-metallic tank walls or inside the tank as a high
level or low level alarm.
Features
Part No. LP15-1405
Switch-Tek LP15 Technical Specifications
Model
LP15-1405
Price
$237.00
Weight (lb)
Insertion Length
Orientation
Accuracy
0.7
Universal
w0.5 mm [0.02 in] in water
Dielectric Range
>20 constants
Conductive range
>100µ
Consumption
Contact Type
(1) SPST relay
Contact Rating
60VA, 1A maximum (125VAC max)
Contact Output
Selectable NO / NC
Maint. Alarm
NPN transistor, 10mA maximum
Process Temp.
-40°F to 176°F [-40°C to 80°C]
150psi [10bar] @ 25°C, derated @
1.667 psi [0.113 bar] per °C above 25°C
Sensor Rating
See our website www.AutomationDirect.com
for complete Engineering drawings.
Part No.LP15-1405
Compatible Products
Switch-Pro™
Remote Level Controllers
Switch-Pro™
Junction Box and Strobe
Switch-Pak ™
Installation Fittings
NEMA 6 (IP68)
Sensor Material
PP (polypropylene)
Cable Jacket Material
PP (polypropylene)
Cable Type
inches [mm]
12-36 VDC
25mA maximum
Pressure
Dimensions
Ω
Supply Voltage
IP
68
2.6 in [67mm]
w1mm [0.04 in] in water
Repeatability
• Guard circuit optimized performance in coating type media
• Submersible polypropylene (PP) sensor body and cable for corrosive liquids
• 60VA relay selectable NO or NC via power supply wiring polarity
• Compatible with Switch-Pak installation fittings
• Ideal for side wall or top mount
• Ideal for coating liquids
• Great for waste water applications
• Made in the USA
4-conductor, #22AWG, shielded
Cable Length
10ft (3m)
Process Mount
3/4” NPT
Classification
General purpose
Compliance*
CE (EN61326, EN61010-1)
LCXX
LC06-1001
LC06-1001
with LC09-1004
and LM90-1001
LM45-7001-0000
LM45-1001-12
See the Switch-Pro® LCXX and Accessories pages at the end of
the section for further details and pricing.
* To obtain the most current agency approval information, see the Agency
Approval Checklist section on the specific part number’s web page at
www.AutomationDirect.com
Book 2 (14.1)
eLE-28
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Tek™ LV10 Buoyancy
Level Switch
Overview
Model
LV10-1301
Price
$102.00
Weight (lb)
Insertion Length
Orientation
• Baffle body and stabilized float dampen out switch chatter
• Submersible polypropylene (PP) sensor and cable for corrosive liquids
• 15VA dry contact (reed switch) selectable NO or NC state
• Compatible with Switch-Pak installation fittings
• Ideal for water and waste applications
• Float can wire directly to PLC/SCADA or controller
• Cage helps protect from debris
• Made in the USA
w20° vertical
Accuracy
w2mm [0.08 in] in water
Repeatability
w1mm [0.04 in] in water
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
IP
68
0.7
4.3 in [108mm]
Soft Starters
Sensors:
Proximity
Features
Switch-Tek LV10 Technical Specifications
Drives
Motors
The general purpose buoyancy point level switch provides reliable liquid
level detection of relatively clean water and chemical solutions. Media
examples include boric acid and ultrapure water. The baffle body eliminates level switch chatter caused by turbulence. The submersible polypropylene (PP) liquid level sensor is mounted vertically inside the tank as a high
level or low level alarm.
Part No. LV10-1301
Company
Information
Sensors:
Temperature
Dimensions
Sensors:
Level
inches [mm]
Sensors:
Flow
Specific Gravity
0.8 minimum
Pushbuttons
and Lights
Contact Type
(1) SPDT reed
Stacklights
Contact Rating
15VA, 0.25 A maximum (125VAC max)
Contact Output
Selectable NO / NC
Process Temp.
-40°F to 194°F [-40°C to 90°C]
Pressure
Sensor Rating
25psi [2bar] @ 25°C, derated @
1.667 psi [0.113 bar] per °C above 25°C
NEMA 6 (IP68)
Sensor Material
PP (polypropylene)
Cable Jacket Material
PP (polypropylene)
Cable Type
3-conductor, #22AWG, shielded
Cable Length
10ft (3m)
Process Mount
3/4” NPT
Classification
General purpose
Compliance*
CE (EN61326)
Signal
Devices
See our website www.AutomationDirect.com
for complete Engineering drawings.
Part No.LV10-1301
Relays and
Timers
Compatible Products
Switch-Pro™
Remote Level Controllers
Process
Switch-Pro™
Pneumatics:
Air Prep
Switch-Pak ™
Junction Box and Strobe
Installation Fittings
Pneumatics:
Directional Control
Valves
LCXX
LC06-1001
LC06-1001
with LC09-1004
when used
and LM90-1001
with
LM45-1001-12 or
LM45-7001-0000
LM45-7001-0000
LM45-1001-12
Pneumatics:
Tubing
See the Switch-Pro® LCXX and Accessories pages at the end of
the section for further details and pricing.
Pneumatics:
Air Fittings
Appendix
Book 2
* To obtain the most current agency approval information, see the Agency
Approval Checklist section on the specific part number’s web page at
www.AutomationDirect.com
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/level-switches
Pneumatics:
Cylinders
Level Sensors
eLE-29
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Pro™ Remote Level
Controllers
Overview
Part No. LC40-1001
Part No. LC41-1001
CSA approved, the Switch-Pro general
purpose level controllers are offered in three
configurations for alarms, pump and valve
control. The LC40 accepts one level sensor
input and provides one 10A relay for high
level or low level alarm. The LC41 accepts
two level sensor inputs and provides one
latching 10A relay for automatic fill or empty
control. The LC42 accepts three level sensor
inputs with one latching 10A relay output
for automatic fill or empty control, and a
second non-latching 10A relay for high level
or low level alarm.
Part No. LC42-1001
Features
• Fail-safe relay control of pumps or valves with 0-60 second delay
• Easy setup with LED indicators for sensor, power and relay status
• 35mm DIN rail mount or panel mount polypropylene (PP) enclosure
with removable terminal strips
• Invert switch changes relay state from NO to NC without rewiring
• Mounts easily in control panel
• Connects to any Flowline level switch
• Interfaces directly with any horn, buzzer, valve, etc...
• Use LC41, LC42 version for automatic fill/empty operations
• Made in the USA
Switch-Pro LC Series Technical Specifications
Model
LC40-1001
LC41-1001
LC42-1001
Price
$181.00
$209.00
$255.00
1.9
1.9
1.9
Weight (lb)
Supply Voltage
120VAC @ 50-60 Hz (can be field configured for 240VAC)
Consumption
Sensor Inputs
5W maximum
(1) two wire level switch
(2) two wire level switches
Sensor Supply
13.5 VDC @ 27mA
LED Indication
Sensor (green), power (green) & relay (red)
Contact Type
(1) SPDT relay (non-latching)
(1) SPDT relay (latching)
Contact Rating
250VAC @ 10A
Contact Output
Selectable NO / NC
Contact Latch
Contact Delay
Ambient Temperature
N/A
Selectable ON / OFF
(3) two wire level switches
(2) SPDT relays, (one non-latching, one latching)
Selectable ON / OFF
0-60 seconds
-40°F to 158°F [-40°C to 70°C]
Enclosure Mounting
35mm DIN rail or thru-hole panel mount
Enclosure Material
PP (polypropylene), UL94VO
Classificaton
General purpose
Compliance*
CE (EN61326, EN61010-1); CSA LR 79326
* To obtain the most current agency approval information, see the Agency Approval Checklist section on the specific part number’s web page at
www.AutomationDirect.com
Book 2 (14.1)
eLE-30
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Switch-Pro™ Remote Level
Controllers
Wiring
Low Level Alarm Output Wiring Example
(One level sensor input required):
LC40 series: 1 sensor input, 1 relay output.
Typical Applicaon:
Automac Fill Output Wiring Example
(Two level sensor inputs required):
High level or low
level alarm
Company
Information
Drives
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
LC41 series: 2 sensor inputs, 1 relay output. The
relay included is a latching relay.
Typical Applicaon:
Sensors:
Photoelectric
Automac fill or
empty
High Level Alarm Output Wiring Example
(One level sensor input required):
Automac Empty Output Wiring Example
(Two level sensor inputs required):
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
LC42 series: 3 sensor input, 2 relay outputs. One
relay is latching and the other is a single input relay.
Typical Applicaon:
Sensors:
Pressure
Automac fill or
empty with high
level or low level
alarm
Dimensions
inches [mm]
Sensors:
Temperature
Level Sensor Input Wiring Example:
Symbol Key:
Power:
Pump:
Horn:
Sensors:
Level
Sensors:
Flow
Valve:
Pushbuttons
and Lights
LZ12
LU10
LP15
LV10*
Stacklights
* LV10 series can be wired using the White
and Black wires for NO operaons or the
Red and Black wires for NC operaons.
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
See our website www.AutomationDirect.com for
complete Engineering drawings.
Pneumatics:
Cylinders
Compatible Products
ProSense Float Level Switches
Pneumatics:
Tubing
Switch-Tek™ Level Switch Sensors
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/level-switches
Level Sensors
eLE-31
Prices as of April 15, 2015. Check Web site for most current prices.
DataPoint™ Remote Level
Controller
Overview
The LC52 general purpose controller provides single tank level indication with 2 relays, up to three setpoints and an isolated analog repeater.
Relay 1 is configurable on a single setpoint. Relay 2 can be configured
on a single setpoint or latched on two setpoints for automatic fill or empty
control. The controller accepts a 4-20 mA input from any type of level
transmitter. The LC52 has a polycarbonate enclosure with integral 35mm
DIN rail mounting.
Part No. LC52-1001
Features
• 3.5 digit LED display indicates level in custom engineering units
• Fail-safe relay control of pumps or valves with 0-60 second delay
• Easy set up with pushbutton calibration for span, display and relay
set points
• 35mm DIN rail or panel mount polypropylene (PP) enclosure with
removable terminal strips
• Invert switch changes relay state from NO to NC without rewiring
• Simple controller for operating 2 alarms or 1 auto fill/empty with
alarm
• Bar graph provides instant confirmation of transmitter’s operational
performance
• Lock-out feature prevents inadvertent setting changes
• Made in the USA
DataPoint LC52 Series Technical Specifications
Model
Price
Weight (lb)
Supply Voltage
Display Type
Display Units
Display Output
LED Indication
LED Bar Graph
Memory
Security
Configuration
Alarm Indication
Sensor Input
Sensor Supply
Loop Power
Consumption
Contact Type
Contact Rating
Contact Output
Contact Latch
Contact Delay
Repeater Output
Ambient Temperature
Enclosure Mounting
Enclosure Material
Classificaton
Compliance*
LC52-1001
$320.00
1.9
120VAC @ 50-60 Hz (can be configured for 240VAC) 50-60 Hz
LED, 3.5 digit
Engineering
0 to 999
Power & relay
Span and setpoints
Non-volatile
Setpoint lock out
Pushbutton
Amber: < 4mA; Red: > 20mA
(1) 4-20 mA
24VDC @ 1.5 W
4-20 mA, 18VDC
5W maximum
(2) SPDT relays (one non-latching, one latching)
250VAC @ 10A
Selectable NO / NC
ON / OFF
0-60 seconds
4-20 mA, 12-36 VDC, 1200Ω max
-40°F to 158°F [-40°C to 70°C]
35mm DIN rail or direct panel mount
Polypropylene (PP), UL94VO
General purpose
CE (EN50082-2, EN55011, EN61010-1)
* To obtain the most current agency approval information, see the Agency Approval Checklist section on the specific
part number’s web page at www.AutomationDirect.com
Book 2 (14.1)
eLE-32
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
DataPoint™ Remote Level
Controller
DELAY
0%
INPUT
100%
4
20
OP
UP
DOWN
SET
INPUT
RLY2B
RLY1
SPAN
3.1"
RLY2A
OFF SET
0%
100%
+
EASY CAL
4
20
OP
UP
DOWN
SET
Soft Starters
Motors
Display
EASY CAL
INVERT
DELAY
Continuous
Controller
RLY1
RELAY 2
INVERT
RLY2B
RELAY 1
LATCH
ON OFF
Continuous
Controller
OFF SET
POWER
Drives
Repeater Ouput (4-20mA) Wiring Example:
RLY2A
LC52 series: One 4-20mA sensor input,
2 relay outputs, 4-20mA repeater output
SPAN
Wiring
Company
Information
+
Power
Transmission
-
Motion: Servos
and Steppers
-
12-36 VDC
POWER
High Level Alarm Output
Wiring Example:
Low Level Alarm Output
Wiring Example:
Motor Controls
AutomaŒc Fill Output
Wiring Example:
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
EchoSonic II (LU23, LU27, LU28 & LU29 Sensors &
EchoPod (DL10, DL14, DL24 & DL34)
Sourcing Mode (Factory Seng)
Wiring Example:
Symbol Key:
Sensors:
Limit Switches
EchoSpan (LU80, LU81, LU83 & LU84 Sensors)
Sourcing Mode (Factory Seng)
Wiring Example:
Sensors:
Current
Sensors:
Pressure
Power:
Horn:
Sensor
Sensors:
Temperature
Sensor
Sensors:
Level
Valve:
Sensors:
Flow
Dimensions
Pushbuttons
and Lights
inches [mm]
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Compatible Products
EchoSonic® II
Ultrasonic Level
Transmiters
EchoPod®
Ultrasonic
Level
Transmitters
Pneumatics:
Directional Control
Valves
See our website www.AutomationDirect.com for complete Engineering drawings.
EchoSpan®
Ultrasonic Level
Transmitter
EchoTouch®
Ultrasonic Level
Transmitters
ProSense®
Submersible Level
Transmitters
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/level-switches
Level Sensors
eLE-33
Prices as of April 15, 2015. Check Web site for most current prices.
Level Switch Accessories
Level Sensor Accessories
Part No.
Item Photo
Description
Quantity Weight (lb)
Price
LM45-1001-12
Flowline Switch-Pak level sensor extension installation fitting, polypropylene (PP)
construction, 12 inch insertion length, 2 inch NPT male process connection, 3/4
inch NPT female sensor threads, 3/4 inch NPT male electrical junction box threads
1
1.1
$41.50
LM45-7001-0000
Flowline Switch-Pak level sensor extension installation fitting kit, polyvinyl
chloride (PVC) construction, includes (1) fitting with 2 inch NPT male process
connection, 3/4 inch NPT male electrical junction box threads and 3/4 inch PVC
pipe socket; (1) fitting with 3/4 inch NPT female sensor threads and 3/4 inch
female PVC pipe socket. Purchase 3/4 inch schedule 40 PVC pipe separately,
cut to desired length and solvent weld to fittings in this kit.
1
0.7
$30.50
LC06-1001
Flowline Switch-Pro compact electrical junction box, polypropylene (PP) construction, screw cover with O-ring gasket, NEMA 4X rated, 3/4 inch NPT female
mounting threads with 300 degree swivel base, 1/2 inch NPT female conduit
entrance, removable 6-pole terminal strip
1
0.7
$55.50
LC09-1004
Flowline Strobe Alert flashing alarm beacon, 1 per second, polycarbonate (PC)
NEMA 4X housing, amber Xenon tube strobe, powered by 12-36 VDC, 5-inch
22AWG lead wires
1
0.7
$111.00
LM90-1001
Cable gland, 1/2 inch NPT male thread, Buna N sealing gland accommodates a
cable diameter range of 0.180 to 0.400 inches (4.6 to 10.2 mm), nylon housing,
IP68 protection level
1
0.4
$5.50
Accessory Field Assembly Examples
Order the following parts for field assembly:
(1) LC06-1001 - Junction box
(1) LM90-1001 - Cable gland
(1) LC09-1004 - Strobe alert flashing alarm
(1) LM45-1001-12 Extension installation
fitting kit
(1) LV10 Series buoyancy level switch
Order the following parts for field assembly:
(1) LC06-1001 - Junction box
(1) LM90-1001 - Cable gland
(1) LU10 Series ultrasonic level switch
Order the following parts for field assembly:
(1) LC06-1001 - Junction box
(1) LM90-1001 - Cable gland
(1) LC09-1004 - Strobe alert flashing alarm
beacon
Book 2 (14.1)
eLE-34
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Dimensions
Level Switch Accessory
Drawings
Company
Information
Drives
Soft Starters
Motors
inches [mm]
LM45-1001-12
Power
Transmission
LM45-7001-0000
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
LC06-1001
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
See our website www.AutomationDirect.com for
complete Engineering drawings.
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/level-switches
Level Sensors
eLE-35
Prices as of April 15, 2015. Check Web site for most current prices.
Dimensions
Level Switch Accessory
Drawings
inches [mm]
LC09-1004
LM90-1001
See our website www.AutomationDirect.com for
complete Engineering drawings.
Book 2 (14.1)
eLE-36
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
SLT Series Submersible Level
Transmitters
Submersible Level Transmitters
Features
Applications
• Models with ported nose cap or non-fouling cage
for diaphragm protection
• Durable 316 SS construction for reliable, long life
in harsh environments
• Shielded cable with atmospheric vent;
over-molded to prevent moisture intrusion
• 1/2 inch NPT male threaded conduit connection
on the sensor housing standard
• Pre-calibrated ranges up to 50 psig (115.3 ftWC)
to meet the most common submersible level
applications in vented tanks, reservoirs & ground
water systems
• +/-0.25% accuracy standard
• All sensors include UL and FM hazardous location
approvals for intrinsically safe applications and are
CE marked
• Made in the USA
Soft Starters
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
• Lift station monitoring
• Liquid level in vented tank
• Landfill leachate monitoring
• Construction by-pass pumping
• Dewatering
• Pump control
• Slurry tank liquid level
• Wastewater
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Part No. SLT2-005-L30
Stacklights
SLT Series Submersible Level Transmitters
Model
Drives
Motors
The ProSense SLT series submersible level sensors provide continuous liquid level measurement by
sensing the hydrostatic pressure produced by the height of liquid above the sensor and providing a
4-20 mA output signal compatible with PLCs, panel meters, data loggers, and other electronic
equipment. The shielded cable with atmospheric vent tube and a tough polyurethane jacket
incorporating an exclusive “water block” liner beneath the jacket is attached to the sensor using an
over-molding process that prevents moisture intrusion. The SLT1 series has a slim 1-inch diameter
housing and a ported bullet nose cap for protection of the sensor diaphragm. The SLT2 series features
a large 2.75 inch diameter PTFE flexible diaphragm surrounded by a 316 stainless steel non-fouling
protective cage. Accessories include a desiccant vent filter, aneroid bellows, junction boxes, and replacement nose caps.
Part No. SLT1-005-L30
Company
Information
Range
Cable Length*
Diaphragm / Protection
Price
Weight (lbs)
Signal
Devices
Process
SLT1-005-L30
0–5 psig (11.5 ftWC)
30ft (9.1 m)
$299.00
1.9
SLT1-010-L40
0–10 psig (23.1 ftWC)
40ft (12.2 m)
$314.00
2.4
SLT1-015-L60
0–15 psig (34.6 ftWC)
60ft (18.3 m)
$344.00
3.4
SLT1-020-L60
0–20 psig (46.1 ftWC)
60ft (18.3 m)
$344.00
3.4
SLT1-030-L100
0–30 psig (69.2 ftWC)
100ft (30.5 m)
$402.00
5.4
Pneumatics:
Cylinders
SLT1-050-L140
0–50 psig (115.3 ftWC)
140ft (42.7 m)
$462.00
7.4
Pneumatics:
Tubing
SLT2-005-L30
0–5 psig (11.5 ftWC)
30ft (9.1 m)
$470.00
5.0
SLT2-010-L40
0–10 psig (23.1 ftWC)
40ft (12.2 m)
$484.00
5.5
$514.00
6.5
316 Stainless steel diaphragm / Ported
POM (polyoxymethylene) nose cap
Flexible PTFE (polytetrafluoroethylene)
diaphragm / Non-fouling stainless
steel cage
SLT2-015-L60
0–15 psig (34.6 ftWC)
60ft (18.3 m)
SLT2-020-L60
0–20 psig (46.1 ftWC)
60ft (18.3 m)
$514.00
6.5
SLT2-030-L100
0–30 psig (69.2 ftWC)
100ft (30.5 m)
$573.00
8.5
* It is required that any excess cable length be accommodated in a service loop and that the cable NOT be shortened as this will void the warranty. If longer transmitter
cable is needed, terminate the sensor in an SLT-JB1 or SLT-JB2 junction box and run standard non-vented instrumentation cable between the junction box and the
measuring electronics.
Book 2 (14.1)
www.automationdirect.com/submersible-level-sensors
Level Sensors
eLE-37
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Prices as of April 15. Check Web site for most current prices.
SLT Series Submersible Level
Transmitters
SLT Series Submersible Level Transmittter Technical Specifications
Static Accuracy*
Resolution
±0.25% FS (full scale)
+0.0001% FS
Wetted Materials
Compensated Temp.
Range
Thermal Error
Operating Temp. Range
Protection Rating
SLT1: 316SS; POM (polyoxymethylene), PUR (polyurethane);
SLT2: 316SS; POM (polyoxymethylene), PUR (polyurethane), PTFE (polytetrafluoroethylene)
0 to 50°C [32 to 122°F]
±0.1% FS/°C (maximum allowable deviation from the best fit straight line due to a change in temperature)
-20 to 60°C [-4 to 140°F]
IP 68, NEMA 6P
Excitation
9–28 VDC
Input Current
20mA max
Output
4–20 mA
Zero Offset
w0.25 mA
Output Impedance
Mounting
750ΩΩ max. @ 24VDC (see loop resistance chart by the wiring drawings for other power supply voltages)
Vertical
Insulation Resistance
Circuit Protection
Cable Jacket Material
Cable Pull Strength
Number of Conductors
Conductor Size
100MΩ at 50VDC
Polarity, surge/shorted output
PUR (polyurethane)
200lbs (90kg)
2 + Drain
22AWG (0.33 mm²) spiral tinned copper wire foil shield with 20AWG (0.52 mm²) drain wire
Vent Tube
PUR (polyethylene) 0.016 in (0.41 mm) ID
Cable Seal
Molded PUR (polyurethane)
Certifications / Agency
Approvals
UL (E197886), CE, RoHS, FM (3036412)
* Combined effects of non-linearity, hysteresis and repeatability, best fit straight line method.
Dimensions
inches [mm]
SLT1 Series
See our website www.AutomationDirect.com for complete Engineering drawings.
Book 2 (14.1)
eLE-38
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
SLT Series Submersible Level
Transmitters
Dimensions
Company
Information
Drives
Soft Starters
Motors
inches [mm]
SLT2 Series
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
See our website www.AutomationDirect.com for complete Engineering drawings.
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Wiring
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Loop Resistance, RL (Ω)
LOOP RESISTANCE vs.
LOOP POWER SUPPLY
1750
Pneumatics:
Air Fittings
1500
1250
RL max =
Appendix
Book 2
(V+) – 9V
20 mA
1000
SLT1 & SLT2 Series Wiring Connection
750
4–20 mA output (22AWG conductors in a shielded cable with vent tube)
500
250
0
Operating
Area
9V
0
10
20
30
Loop Power Supply Voltage
+ Excitation
Red
- Excitation
Black
Shield
Drain Wire
Book 2 (14.1)
www.automationdirect.com/submersible-level-sensors
Level Sensors
eLE-39
Terms and
Conditions
Prices as of April 15. Check Web site for most current prices.
SLT Series Submersible Level
Transmitter Accessories
Submersible Level Transmitter Vent Filter (Desiccant)
Vent filters utilize indicating desiccant to prevent moisture from entering the vent tube and
damaging transmitters with vented gage reference pressure. The desiccant will turn from
blue to pink when exposed to moisture indicating the need for maintenance. This vent
filter design prevents moisture from entering the vent tube for at least one year without
maintenance.
Submersible Level Transmitter Vent Filter (Desiccant)
Part No.
Description
Housing Material Tubing Size
SLT-VF1
ProSense indicating desiccant vent filter,
PUR (polyethylene) tube
for ProSense submersible hydrostatic level with PP (polypropylene)
transmitters
fittings
13in (330mm)
Connector Material
PEEK
(Polyetheretherketone)
Price
$22.00
Weight (lbs)
0.5
Dimensions
inches [mm]
Submersible Level Transmitter Aneroid Bellows
The aneroid bellows is a maintenance-free alternative to desiccant filters for moisture
protection on vented gage transmitters. Made of flexible neoprene material attached to
a polycarbonate mounting bracket, the bellows fluctuates with changes in atmospheric
pressure, maintaining a constant barometric reference. Note that the use of the bellows
results in a closed reference pressure system subject to zero shift errors induced by
changing temperatures of up to 0.003 psi/°C.
Submersible Level Transmitter Aneroid Bellows
Part No.
Description
Housing Material Tubing Size
SLT-AB1
attached
ProSense aneroid bellows, for ProSense Neoprenetobellows
a PC
submersible hydrostatic level transmitters (polycarbonate)
bracket
12in (305mm)
Connector Material
PEEK
(Polyetheretherketone)
Price
$33.00
Weight (lbs)
0.8
Dimensions
inches [mm]
Always install a vent filter (desiccant) or aneroid bellows immediately after transmitter installation. Failure to use
one or the other could result in premature failure of the transmitter, which would not be covered by warranty.
See our website www.AutomationDirect.com for complete Engineering drawings.
Book 2 (14.1)
eLE-40
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
SLT Series Submersible Level
Transmitter Accessories
Junction Boxes for Submersible Level
Transmitters
The submersible level transmitter junction boxes provide a water-resistant
enclosure for electrically connecting the transmitter cable to the user’s
system via a terminal strip. The enclosure also provides a convenient
location for terminating the transmitter’s vent tube to a vent filter (included
in Part No. SLT-JB1) or an aneroid bellows (included in Part No.
SLT-JB2). The enclosure is constructed of polycarbonate with a clear top
incorporating a neoprene seal. The junction box is rated IP56.
Company
Information
Drives
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Application
• If longer transmitter cable is needed, terminate the sensor in an SLT-JB1 or
SLT-JB2 junction box and run standard instrumentation cable between the
junction box and the measuring electronics.
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
ProSense Junction Boxes for Submersible Level Transmitters
Part No.
Description
Price
SLT-JB1
ProSense junction box for ProSense submersible hydrostatic level transmitter with SLTVF1 indicating desiccant vent filter
$149.00
2.5
SLT-JB2
ProSense junction box for ProSense submersible hydrostatic level transmitters with
SLT-AB1 aneroid bellows
$149.00
2.5
Sensors:
Pressure
Weight (lbs)
Sensors:
Temperature
Sensors:
Level
Dimensions
Sensors:
Flow
inches [mm]
Part No. SLT-JB1
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
See our website www.AutomationDirect.com for complete Engineering drawings.
Book 2 (14.1)
www.automationdirect.com/submersible-level-sensors
Level Sensors
eLE-41
Prices as of April 15. Check Web site for most current prices.
SLT Series Submersible Level
Transmitter Accessories
Dimensions
inches [mm]
Part No. SLT-JB2
See our website www.AutomationDirect.com for complete Engineering drawings.
Book 2 (14.1)
eLE-42
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
SLT Series Submersible Level
Transmitters Accessories
Submersible Level Transmitter Replacement Open-face
Nose Cap
The open-face nose cap offers the best resistance to clogging. This single-piece nose cap provides
maximum exposure of the sensing diaphragm to the liquid media through a protective perforated
screen on the front. The open-face nose cap is constructed from molded polyoxymethylene (POM).
Company
Information
Drives
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Submersible Level Transmitter Replacement Open-Face Nose Cap
Part No.
Description
SLT-CAP1
ProSense open-faced nose cap, interchangeable with ported bullet nose cap on any ProSense SLT1
series hydrostatic level transmitter, polyoxymethylene (POM)
Price
Weight (lbs)
$25.00
0.1
Sensors:
Photoelectric
Sensors:
Encoders
Dimensions
Sensors:
Limit Switches
inches [mm]
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Submersible Level Transmitter Replacement Ported Bullet
Nose Cap
The ported bullet nose cap offers the best protection against damage to the sensing diaphragm. This
single-piece nose cap allows the liquid media to enter through six 1/8” holes around the outside
and includes a #8-32 UNC-2B threaded hole on the front. The closed-face nose cap is constructed
of molded polyoxymethylene (POM).
Submersible Level Transmitter Replacement Ported Bullet Nose Cap
Part No.
Description
Price
SLT-CAP2
ProSense ported bullet nose cap, replacement, for ProSense SLT1 series submersible hydrostatic level
transmitters, polyoxymethylene (POM)
Weight (lbs)
$25.00
0.1
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Dimensions
Pneumatics:
Cylinders
inches [mm]
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
See our website www.AutomationDirect.com for complete Engineering drawings.
Book 2 (14.1)
www.automationdirect.com/submersible-level-sensors
Level Sensors
eLE-43
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches
Float Level Switches,
Vertical Top-Mount
Float materials: Polypropylene (PP),
Buna-N, 316SS, Kynar (PVDF),
PTFE “Teflon”
See pg. LE-46
Float Level Switches,
Vertical Suspendible /
Submersible
Float material: Buna-N
See pg. LE-55
Float Level Switches,
Horizontal Side-Mount
Float materials: Polypropylene (PP),
Polybutylene Terephthalate (PBT),
316SS, Kynar (PVDF), Buna-N
• Stem materials: Polypropylene (PP),
Polybutylene Terephthalate (PBT), Brass,
316SS, Kynar (PVDF), PTFE “Teflon”
•Mounting: 3/8-16 UNC, 1/8” MNPT, 1/4”
MNPT (install +/- 30° from vertical)
- Can also be mounted with the mounting
threads below the float (bottom
mount) as in the bottom of a tank •Temperature range: -40°F up to 392°F
(depending on model)
• Max pressure ratings: up to 500 psig (FLS VL-600)
•Made in the USA
• Stem material: Brass
• Slosh shield: Polybutylene Terephthalate (PBT)
• Mounting: Suspendible cable
• Temperature range: -40°F to 221°F
• Max pressure: 50 psig
• Made in the USA
• The FLS-VL-900 suspendible /
submersible float
• Stem materials: Polypropylene (PP), Polybutylene
Terephthalate (PBT), 316SS, Kynar (PVDF), Brass
• Mounting: 3/8-24 UNC, 5/8-11 UNC, 1/2-13 UNC, 1/2” MNPT, dual 1/2” MNPT, 1” MNPT x 1/2” MNPT
• Temperature ranges: -40°F up to 392°F
(depending on model)
• Max pressures: up to 300 psig
• Made in the USA
See pg. LE-56
Float Level Switch Kits
ProSense float level switch kits provide
the opportunity to fabricate in the field a
customized two-float level switch using
the supplied kit components. Level
switch kits are available in three different
material constructions (polypropylene,
brass, stainless steel) for compatibility
with different liquids
See pg.LE-62
Each kit contains:
• 2-inch NPT male threaded pipe plug
with attached cuttable mounting tube
• Two additional cuttable connecting tubes
• Two floats
• Two SPST switch capsules that can
function as either normally closed or
normally open depending on float orientation
• Four compression unions
• One compression end cap
• Made in the USA
Float Level Tilt Switches
Float level tilt switches provide inexpensive,
efficient and highly reliable level detection in open vessels, sumps and ponds.
The molded rubber float has an integral
three-conductor cable and operates
on a mercury-free micro-switch device
that is located inside the float on an
anti-vibration mount.
See pg. LE-66
Book 2 (14.1)
eLE-44
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
ProSense Float Level Switches
Company
Information
ProSense float level switches provide a low-cost general purpose solution for
single point monitoring of liquid level in a variety of applications. Powerful
permanent magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid
level. These switches are available in several different material constructions for compatibility with many types of liquids, a wide temperature range,
and system pressure requirements. Vertical and horizontal mounting styles
with several mounting thread variations are offered for ease of installation.
Reed switches carry electrical ratings for both AC and DC voltage for adaptability to many control interface applications. Although these switches come
configured for normally closed operation, most models can be easily
converted to normally open operation in the field. Designed to be shock and
vibration resistant, ProSense float level switches ensure long and trouble-free
service.
Features
• Low-cost solution for general purpose single point liquid level monitoring
• Magnetically operated, highly reliable and repeatable hermetically sealed reed
switch
• Vertical and horizontal mounting styles with a variety of mounting threads
• Several material constructions for compatibility with different liquids
• Electrical ratings for AC and DC voltage
• Most switches easily converted in the field from normally closed to normally open
operation
• Made in the USA
Operation
Drives
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
ProSense float level switches are shipped configured for
normally closed switch operation. Except where noted, most
models can be easily converted to normally open operation in
the field.
Vertical Mount switches can also be mounted with the mounting
threads below the float (bottom mount) as in the bottom of a
tank. If bottom mounted, switch operation will be the opposite
of top mounted installation described above.
Sensors:
Flow
Vertical Mount Switches
Horizontal Mount Switches
Stacklights
For Vertical Mount switches, normally closed is defined as the
switch mounted in a vertical position with the mounting threads
above the float (top mount) and the float in the “dry” position
at the bottom of the stem (Figure 1). When the liquid raises the
float, the switch will open.
For Horizontal Mount switches installed in the side of a tank
(side-mounted), normally closed is defined as when the float
arm is below and parallel with the stem in the “dry” position
(Figure 2). When the liquid raises the float, the switch will open.
To change the operation of the switch to normally open, remove
the C-clip, remove the float from the stem, flip the float 180
degrees, re-install the float on the stem and replace the C-clip.
Now the switch will be normally open in the “dry” position and
will close when the liquid raises the float.
To change the operation of the switch, rotate the installed
position of the switch 180 degrees so the float arm is above
and hanging at an angle with the stem. Now the switch will
be normally open in the “dry” position and will close when the
liquid raises the float.
Pushbuttons
and Lights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Normally Closed Installation (Dry)
Normally Closed Installation (Dry)
To Change Operation To
Normally Open
Step 1: Remove C-Clip
Step 2: Flip Float On Stem 180°
Step 3: Reinstall C-Clip
Figure 1: Vertical (Top) Mount Switch Operation
Normally Open Installation (Dry)
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Figure 2: Horizontal Mount Switch Operation
Book 2 (14.1)
www.automationdirect.com/ultrasonic-level-sensors
Level Sensors
eLE-45
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-VS-100
Stem
Material
Temperature Pressure
Range
Polypropylene Polypropylene -40°F to 221°F
$20.25
(PP)
(PP)
[-40°C to 105°C]
Float
Specific Electrical
Gravity Rating*
50 psig
[3.4 bar]
0.7
SPST-NC,
15W max
120VAC, 0.12 A
100VDC, 0.1 A
24VDC, 0.3 A
12VDC, 0.3 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Hole
Ø 0.375 in
cURus, CE
[9.53 mm]
(Install w 30° (See Approvals
table for details)
max from
vertical)
Weight
(lbs)
0.02
* Normally closed switch only. Cannot be converted to function as normally open. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-VS-200
Stem
Material
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
Polypropylene Polypropylene -40°F to 221°F
$20.25
(PP)
(PP)
[-40°C to 105°C]
50 psig
[3.4 bar]
0.7
SPST-NC,
15W max
120VAC, 0.12 A
100VDC, 0.1 A
24VDC, 0.3 A
12VDC, 0.3 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
1/8 in MNPT
CE
(Install w 30° (See approvals
max from
table for details)
vertical)
Weight
(lbs)
0.02
* Normally closed switch only. Cannot be converted to function as normally open. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-46
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
FLS-VM-100
Price
$10.50
Float
Material
Stem
Material
Temperature Pressure Float
Specific
Range
Gravity
Polypropylene Polypropylene -40°F to 221°F
(PP)
(PP)
[-40°C to 105°C]
100 psig
[6.9 bar]
0.8
Electrical
Rating*
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Motors
Lead
Wires
22AWG,
MTW 24in
Mounting Approvals Weight
Thread
(lbs)
1/8 in MNPT cURus, CSA,
(Install w 30°
CE
max from (See Approvals
vertical)
table for details)
Power
Transmission
Motion: Servos
and Steppers
0.1
Motor Controls
Sensors:
Proximity
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Float Level Switch Specifications
Part No.
FLS-VM-200
Price Float
Material
$12.00
Buna-N
Stem
Material
Temperature Pressure Float
Specific
Range*
Gravity
Polybutylene
Terephthalate -40°F to 221°F
[-40°C to 105°C]
(PBT)
150 psig
[10.4 bar]
0.45
Electrical
Rating1
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals Weight
Thread
(lbs)
1/8 in MNPT cURus, CSA,
CE
(Install w 30°
max from (See Approvals
vertical)
table for details)
0.1
Stacklights
Signal
Devices
Process
Relays and
Timers
* Not for use in hot water at temperatures above 149ºF [65ºC]
1
ormally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
N
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Dimensions
Pneumatics:
Cylinders
inches [mm]
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-47
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-VM-300
$23.50
Buna-N
Stem
Material
Brass
Temperature Pressure Float
Specific
Range
Gravity
-40°F to 221°F
[-40°C to 105°C]
150 psig
[10.3 bar]
0.45
Electrical
Rating*
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
1/8 in MNPT cURus, CSA, CE
(Install w 30° (See Approvals
max from table for details)
vertical)
Weight
(lbs)
0.1
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Part No.
Price
FLS-VM-400
Float
Material
$38.00
316SS
Stem
Material
316SS
Temperature Pressure Float
Specific
Range
Gravity
-40°F to 392°F
[-40°C to 200°C]
300 psig
[20.7 bar]
0.7
Electrical
Rating*
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
1/8 in MNPT cURus, CSA,
CE
(Install w 30°
max from
(See Approvals
vertical)
table for details)
Weight
(lbs)
0.1
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-48
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
FLS-VM-500
Price Float
Material
Stem
Material
Kynar
(PVDF)
Kynar
(PVDF)
$29.50
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 221°F
[-40°C to 105°C]
15 psig
[1bar]
0.85
Motors
Lead
Wires
SPST-NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
22AWG,
Teflon 24in
Mounting Approvals Weight
Thread
(lbs)
1/8 in MNPT
cURus, CE
(Install w 30° (See Approvals
max from table for details)
vertical)
Power
Transmission
Motion: Servos
and Steppers
0.1
Motor Controls
Sensors:
Proximity
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Float Level Switch Specifications
Part No.
Price Float Material
FLS-VM-600
Polytetrafluoroethylene
$173.00
(PTFE)
“Teflon”
Stem
Temperature Pressure Float
Specific Electrical
Material Range
Gravity Rating*
PTFE
“Teflon”
-40°F to 302°F
[-40°C to 150°C]
25 psig
[1.7 bar]
@ 21°C
[69.8°F]
0.69
SPST-NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Lead
Wires
Mounting Approvals Weight
Thread
(lbs)
1/8 in MNPT
CE
22AWG, (Install w 30°
(See Approvals
Teflon 24in max from table
for details)
vertical)
Stacklights
Signal
Devices
Process
0.1
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Dimensions
Pneumatics:
Cylinders
inches [mm]
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-49
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Float Level Switch Specifications
Part No.
Price Float
Material
Stem /
Float
Slosh Shield Temperature
Pressure Specific Electrical
Range
Material
Gravity Rating*
Polypropylene Polypropylene
-40°F to 221°F
FLS-VL-010 $20.75
(PP)
(PP)
[-40°C to 105°C]
100 psig
[6.9 bar]
0.8
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
MTW 24in
Mounting Approvals Weight
Thread
(lbs)
1/8 in MNPT cURus, CSA, CE
(Install w 30° (See Approvals
max from table for details)
vertical)
0.1
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Part No.
Price Float
Material
FLS-VL-020 $25.25
Buna-N
Stem /
Float
Slosh Shield Temperature
Pressure Specific Electrical
1
Range*
Material
Gravity Rating
Polybutylene
Terephthalate
(PBT)
-40°F to 221°F
[-40°C to 105°C]
150 psig
[10.3 bar]
0.45
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
1/8 in MNPT cURus, CSA,
CE
(Install w 30°
max from
(See Approvals
vertical)
table for details)
Weight
(lbs)
0.1
* Not for use in hot water at temperatures above 149ºF [65ºC]
1
ormally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
N
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-50
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
Stem /
Float
Price Float
Shield Temperature
Pressure Specific Electrical
Material Slosh
Range
Material
Gravity Rating*
FLS-VL-030 $53.00
316SS
316SS
-40°F to 392°F
[-40°C to 200°C]
300 psig
[20.7 bar]
0.7
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Motors
Lead
Wires
Mounting Approvals
Thread
Weight
(lbs)
Motion: Servos
and Steppers
1/8 in MNPT cURus, CSA,
CE
(Install w 30°
max from
(See Approvals
vertical)
table for details)
22AWG,
Teflon 24in
Power
Transmission
0.2
Motor Controls
Sensors:
Proximity
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Sensors:
Photoelectric
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Float Level Switch Specifications
Part No.
Price
FLS-VL-040 $93.00
Float
Material
316SS
Stem /
Float
Slosh Shield Temperature
Pressure Specific Electrical
Range
Material
Gravity Rating*
316SS
-40°F to 392°F
[-40°C to 200°C]
200 psig
[13.8 bar]
0.55
SPST-NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Lead
Wires
Mounting Approvals
Thread
22AWG,
Teflon 24in
Weight
(lbs)
1/4 in MNPT
CSA, CE,
(Install w 30° (See Approvals
max from table for details)
vertical)
0.4
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Dimensions
inches [mm]
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-51
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-VL-100
$43.25
Stem
Material
Temperature Pressure Float
Specific
Range
Gravity
Polypropylene Polypropylene -40°F to 221°F
(PP)
(PP)
[-40°C to 105°C]
100 psig
[6.9 bar]
0.75
Electrical
Rating*
SPST-NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Lead
Wires
22AWG,
MTW 24in
Mounting Approvals
Thread
1/4 in MNPT cURus, CSA, CE
(Install w 30° (See Approvals
max from table for details)
vertical)
Weight
(lbs)
0.1
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-VL-200
$25.00
Buna-N
Stem
Material
Temperature Pressure Float
Specific Electrical
1
Range*
Gravity Rating
Polybutylene
Terephthalate -40°F to 221°F
[-40°C to 105°C]
(PBT)
150 psig
[10.3 bar]
0.45
SPST-NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
1/4 in MNPT cURus, CSA, CE
(Install w 30° (See Approvals
max from table for details)
vertical)
Weight
(lbs)
0.1
* Not for use in hot water at temperatures above 149ºF [65ºC]
1
ormally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
N
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-52
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
FLS-VL-300
Price Float
Material
$25.00
Stem
Material
Buna-N
Brass
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 221°F
[-40°C to 105°C]
150 psig
[10.3 bar]
0.45
Motors
Lead
Wires
SPST-NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
22AWG,
MTW 24in
Mounting Approvals
Thread
Weight
(lbs)
1/4 in MNPT cURus, CSA, CE
(Install w 30° (See Approvals
max from table for details)
vertical)
0.3
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Proximity
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Sensors:
Photoelectric
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Float Level Switch Specifications
Part No.
Stem
Minimum** Maximum Pressure Float
Price Float
Specific Electrical
Material Material Temperature Temperature
Gravity Rating*
FLS-VL-400 $53.00
316SS
316SS
-40°F
[-40°C]
392°F
[200°C]
200 psig
[13.8 bar]
0.55
Pushbuttons
and Lights
Lead
Wires
Mounting Approvals
Thread
Weight
(lbs)
UR, CSA, CE,
1/4 in MNPT
240VAC, 0.4 A
120VAC, 0.5 A 22AWG, (Install w 30° (See Approvals
table for details)
120VDC, 0.2 A Teflon 24in max from
Haz-Loc
24VDC, 0.5 A
vertical)
Approvals
Stacklights
Signal
Devices
0.3
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
** -40°F [-40°C] rating not UL tested
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Dimensions
inches [mm]
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-53
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Top-Mount
Float Level Switch Specifications
Part No.
Price Float Material
FLS-VL-500
Polytetrafluoroethylene
(PTFE)
$257.00
“Teflon”
Stem
Temperature Pressure Float
Specific Electrical
Material Range
Gravity Rating*
PTFE
“Teflon”
-40°F to 302°F
[-40°C to 150°C]
40 psig
[2.8 bar]
@ 21°C
[69.8°F]
0.63
SPST-NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Lead
Wires
22AWG,
Teflon 24in
Mounting
Thread
Weight
(lbs)
Approvals
1/4 in MNPT
(Install w 30°
max from
vertical)
CE
(See Approvals
table for details)
0.1
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-VL-600
$67.25
316SS
Stem
Material
316SS
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 392°F
[-40°C to 200°C]
500 psig
[34.5 bar]
0.7
SPST-NC,
100W max
240VAC, 0.4 A
120VAC, 1A
120VDC, 0.4 A
24VDC, 1A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
1/4 in MNPT
CE
(Install w 30° (See Approvals
max from table for details)
vertical)
Weight
(lbs)
0.3
* Normally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-54
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Vertical
Suspendible / Submersible
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
Stem
Slosh
Price Float
Material Material Shield
FLS-VL-900 $98.75
Buna-N
Brass
Temperature Pressure Float
Specific Electrical
1
Range*
Gravity Rating
Polybutylene
Terephthalate -40°F to 221°F
[-40°C to 105°C]
(PBT)
50 psig
[3.4 bar]
0.45
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Motors
Lead
Wires
Mounting Approvals Weight
(lbs)
22AWG,
CE
Suspendible
Halar jacketed
(See Approvals
cable
20-foot cable
table for details)
Motion: Servos
and Steppers
0.3
Motor Controls
Sensors:
Proximity
* Not for use in hot water at temperatures above 149ºF [65ºC]
1
Power
Transmission
ormally closed switch. Can be converted in the field to function as normally open as described under “Operation”. Electrical ratings are for resistive loads
N
ONLY. For inductive loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Sensors:
Encoders
Dimensions
Sensors:
Limit Switches
inches [mm]
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-55
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Horizontal
Side-Mount
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-HS-100
$12.00
Stem
Material
Polypropylene Polypropylene
(PP)
(PP)
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 221°F
[-40°C to 105°C]
100 psig
[6.9 bar]
0.6
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
MTW 24in
Mounting Approvals
Thread
cURus, CSA,
Dual
CE
1/2 in MNPT (See Approvals
table for details)
Weight
(lbs)
0.1
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Stem
Material
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
Part No.
Price Float
Material
FLS-HS-200
Polypropylene Polypropylene -40°F to 221°F
$14.25
(PP)
(PP)
[-40°C to 105°C]
100 psig
[6.9 bar]
0.6
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
MTW 24in
Mounting Approvals
Hole
Ø 0.625 in
[16 mm]
cURus, CSA,
CE
(See Approvals
table for details)
Weight
(lbs)
0.1
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-56
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Horizontal
Side-Mount
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Stem
Material
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
Part No.
Price Float
Material
FLS-HS-300
Polypropylene Polypropylene -40°F to 221°F
$25.75
(PP)
(PP)
[-40°C to 105°C]
100 psig
[6.9 bar]
0.6
Motors
Lead
Wires
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Mounting Approvals
Hole
22AWG,
MTW 24in
Ø 0.91 in
[23.1 mm]
CE
(See Approvals
table for details)
Weight
(lbs)
Power
Transmission
Motion: Servos
and Steppers
0.1
Motor Controls
Sensors:
Proximity
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
TANK WALL
COMPRESSION
GASKET FLANGE
COMPRESSED
GASKET
Sensors:
Flow
TO INSTALL:
INSERT SWITCH
FROM OUTSIDE
OF TANK & TIGHTEN
COMPRESSION NUT
Ø0.91 [Ø23.1]
MOUNTING HOLE
Pushbuttons
and Lights
Stacklights
Float Level Switch Specifications
Part No.
Price Float
Material
Polybutylene
Stem
Material
Temperature Pressure Float
Specific Electrical
1
Range*
Gravity Rating
Polybutylene
-40°F to 266°F
FLS-HM-100 $18.00 Terephthalate Terephthalate [-40°C to 130°C]
(PBT)
(PBT)
100 psig
[6.9 bar]
0.7
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Signal
Devices
Lead
Wires2
Mounting Approvals
Thread
Weight
(lbs)
Process
Relays and
Timers
22AWG,
Teflon 24in
cURus, CSA, CE
Dual
(See Approvals
1/2 in MNPT table
for details)
0.1
* Not for use in hot water at temperatures above 149ºF [65ºC]
1
an be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
C
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
2
Leadwires rated for 140ºF [60ºC] max when exposed to oil
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Dimensions
Pneumatics:
Air Fittings
inches [mm]
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-57
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Horizontal
Side-Mount
Float Level Switch Specifications
Part No.
Float
Stem
Minimum** Maximum
Electrical
Price Float
Material Material Temperature Temperature Pressure Specific
Gravity Rating*
FLS-HM-200 $130.00
316SS
316SS
-40°F
[-40°C]
392°F
[200°C]
300 psig
[20.7 bar]
0.6
Lead
Wires
Mounting Approvals
Thread
Weight
(lbs)
UR, CSA,
CE
240VAC, 0.14 A
22AWG,
Dual
120VAC, 0.28 A
(See Approvals
120VDC, 0.07 A Teflon 24in 1/2 in MNPT table for details)
24VDC, 0.28 A
Haz-Loc
Approvals
0.3
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
** -40°F [-40°C] rating not UL tested
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Part No.
Price Float
Material
FLS-HM-300 $24.50
Kynar
(PVDF)
Stem
Material
Kynar
(PVDF)
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 221°F
[-40°C to 105°C]
100 psig
[6.9 bar]
0.93
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
cURus, CE,
Dual
(See Approvals
1/2 in MNPT table
for details)
Weight
(lbs)
0.2
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-58
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Horizontal
Side-Mount
Company
Information
Drives
Soft Starters
Float Level Switch Specificationsld
Part No.
Price Float
Material
FLS-HL-010
Polypropylene
$25.25
(PP)
Motors
Stem / Slosh Temperature Pressure Float
Specific Electrical
Shield Material Range
Gravity Rating*
Polypropylene
(PP)
-40°F to 221°F
[-40°C to 105°C]
100 psig
[6.9 bar]
0.6
Lead
Wires
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Mounting Approvals Weight
Thread
(lbs)
Power
Transmission
Motion: Servos
and Steppers
CE
22AWG, 1in MNPT x
(See Approvals
MTW 24in 1/2 in MNPT table
for details)
0.2
Motor Controls
Sensors:
Proximity
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Float Level Switch Specifications
Part No.
FLS-HL-200
Price Float
Material
$72.50
316SS
Stem
Material
316SS
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 392°F
[-40°C to 200°C]
100 psig
[6.9 bar]
0.7
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Stacklights
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Hole
Ø 0.563 in
[14.3 mm]
cURus, CE
(See Approvals
table for details)
Weight
(lbs)
Signal
Devices
Process
0.3
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Dimensions
Pneumatics:
Cylinders
inches [mm]
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-59
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Horizontal
Side-Mount
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-BM-100
Polypropylene
$44.25
(PP)
Stem
Material
316SS
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 221°F
[-40°C to 105°C]
100 psig
[6.9 bar]
0.8
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Hole
Ø 0.406 in
[10.3 mm]
CE
(See Approvals
table for details)
Weight
(lbs)
0.2
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Float Level Switch Specifications
Part No.
Price Float
Material
FLS-BM-200 $38.00
Buna-N
Stem
Material
Brass
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 221°F
[-40°C to 105°C]
150 psig
[10.3 bar]
0.45
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Hole
Ø 0.406 in
[10.3 mm]
CE
(See Approvals
table for details)
Weight
(lbs)
0.2
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-60
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches, Horizontal
Side-Mount
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
FLS-BM-300
Price Float
Material
$41.50
316SS
Stem
Material
316SS
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 392°F
[-40°C to 200°C]
300 psig
[20.7 bar]
0.7
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Motors
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Hole
Ø 0.406 in
[10.3 mm]
CSA, cURus, CE
(See Approvals
table for details)
Weight
(lbs)
Power
Transmission
Motion: Servos
and Steppers
0.2
Motor Controls
Sensors:
Proximity
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Float Level Switch Specifications
Part No.
FLS-BL-100
Price Float
Material
$91.75
316SS
Stem
Material
316SS
Temperature Pressure Float
Specific Electrical
Range
Gravity Rating*
-40°F to 392°F
[-40°C to 200°C]
50 psig
(3.4 bar)
0.6
SPST-NC,
30W max
240VAC, 0.14 A
120VAC, 0.28 A
120VDC, 0.07 A
24VDC, 0.28 A
Lead
Wires
22AWG,
Teflon 24in
Mounting Approvals
Thread
1/2 in MNPT
CE
(See Approvals
table for details)
Weight
(lbs)
Stacklights
Signal
Devices
0.3
* Can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads, maximum
life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
inches [mm]
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-61
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switch Kits
Float Level Switch Kits
ProSense float level switch kits provide the opportunity to fabricate in the field
a customized two-float level switch with a maximum stem length of 36 inches
(914.4 mm) using the supplied kit components. Level switch kits are available
in three different material constructions for compatibility with different liquids.
Each kit is furnished with the following components:
• 2-inch NPT male threaded pipe plug with attached cuttable mounting tube
• Two additional cuttable connecting tubes
Plastic
Brass
• Two floats
• Two SPST switch capsules that can function as either normally closed or normally
open depending on float orientation
• Four compression unions
• One compression end cap
Assembly of ProSense float level switch kits generally involves the following
steps:
• Lay out the supplied components in the required configuration
• Determine the lengths of the connecting tubes and cut them accordingly
• De-burr and smooth the sharp edges of the cut tubes prior to installation
• Perform a trial assembly and using a continuity indicator (light, buzzer, Ohm meter,
etc.), verify that the switch actuation levels are at the required levels and the switch
action (normally open or normally closed) is correct for the application.
• When switch set-up is satisfactory, tighten the fittings and apply thread sealant to
the pipe threads on the top fitting before installing the switch into the tank.
Installation Example
RED WIRES FROM
BLACK WIRES
L1 SWITCH
FROM L2 SWITCH
PIPE FITTING
2" NPT MALE
TUBECUT TO L1 - 2.46"
UNION - TYP
.90"
( L1 )
TUBE END
WITNESS MARKFLOAT IN NORMALLY
OPEN POSITION
INSERTION
DEPTH
L1
2.46"
Stainless Steel
ACTUATION
POINT
ACTUATION
POINT
2.46"
L2
L1 SWITCH
CAPSULE
RED WIRES
SWITCH CAPSULE
DO NOT CUT
TUBE END
TIGHTEN NUT
WHILE HOLDING
FITTING BODY
HOLD
WHEN
TIGHTENING
CONNECTING TUBE
UNION-TYPICAL
BLACK WIRES
FROM L2 SWITCH
L2 SWITCH
CAPSULE
BLACK WIRES
ACTUATION
POINT
WITNESS MARKFLOAT IN NORMALLY
CLOSED POSITION
END CAP
Book 2 (14.1)
eLE-62
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switch Kits
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
FLS-VK-100
Price Float
Material
Polypropylene
$314.00
(PP)
Other
Float
Components Temperature
Pressure
Specific Electrical
Range
Material
Gravity Rating*
Polypropylene
(PP)
-40°F to 221°F
[-40°C to 105°C]
100 psig
[6.89 bar]
0.75
SPST NO or NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Motors
Lead
Wires
22AWG,
Teflon 6ft
Mounting Approvals
Thread
Weight
(lbs)
2in MNPT
cURus, CE
pipe plug /
1/2 in MNPT (See Approvals
table for details)
conduit
Power
Transmission
Motion: Servos
and Steppers
1.0
Motor Controls
Sensors:
Proximity
* Each float can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive
loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-63
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switch Kits
Float Level Switch Specifications
Price Float
Material
Part No.
FLS-VK-200
$177.00
Buna-N
Other
Float
Components Temperature
Pressure
Specific Electrical
Range
Material
Gravity Rating*
Brass
-40°F to 221°F
[-40°C to 105°C]
150 psig
[10.34 bar]
0.45
SPST NO or NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Lead
Wires
22AWG,
Teflon 6ft
Mounting
Thread
Approvals
2in MNPT pipe
cURus, CE
plug /
(See Approvals
1/2 in MNPT table
for details)
conduit
Weight
(lbs)
4.0
* Each float can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive loads,
maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
inches [mm]
Book 2 (14.1)
eLE-64
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switch Kits
Company
Information
Drives
Soft Starters
Float Level Switch Specifications
Part No.
Other
Temperature Pressure Float
Price Float
Components
Specific Electrical
Material Material
Range
Gravity Rating*
FLS-VK-300 $358.00
316SS
316SS
-40°F to 392°F
200 psig
[-40°C to 200°C] [13.79 bar]
0.55
SPST NO or NC,
60W max
240VAC, 0.4 A
120VAC, 0.5 A
120VDC, 0.2 A
24VDC, 0.5 A
Motors
Lead
Wires
22AWG,
Teflon 6ft
Mounting Approvals
Thread
2in MNPT
cURus, CE
pipe plug /
1/2 in MNPT (See Approvals
table for details)
conduit
Weight
(lbs)
Power
Transmission
Motion: Servos
and Steppers
4.0
Motor Controls
Sensors:
Proximity
* Each float can be installed to function as either normally open or normally closed switch. Electrical ratings are for resistive loads ONLY. For inductive
loads, maximum life will be obtained with the use of appropriate transient suppression such as an MOV or TVS.
Sensors:
Photoelectric
Caution: Not recommended for use with PLC AC inputs or other digital AC input devices due to damage that may occur to the switch or input device.
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-65
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Tilt Switches
Float Level Tilt Switches
Float level tilt switches provide inexpensive, efficient and highly reliable level
detection in open vessels, sumps and ponds.
The molded rubber float has an integral three-conductor cable and operates
on a mercury-free micro-switch device that is located inside the float on an
antivibration mount.
The rubber float is constructed of ethylene propylene diene (EPDM), a
synthetic rubber with rigid and durable characteristics for long service life
and resistance to heat, oxidation, ozone and aging due to weather. EPDM
has good electrical resistivity, as well as resistance to solvents such as water,
acids, alkalies, phosphate esters and many ketones and alcohols.
The basic operating principle is that as the fluid level rises, the float will
rise, causing the microswitch to tilt and generate a signal that can be used
to start or stop a pump, open or close a valve or actuate indicator alarms
as required. Float travel is in an approximately ± 45˚ arc from its nominal
position.
Features
• Low cost
• Easy installation
• Versatile application
• Mercury-free SPDT 16 amp switch
• 7 meter (22.9 foot) PVC jacketed cable
Installation Example
Float Travel is proportional to distance between float body and weight or anchor point.
Example 1: 6 inches between float body and weight will require 12 inches total float travel for proper
opertaion of switch.
Example 2: 18 inches between float body and weight will require 36 inches total float travel to proper
operation of switch.
Switch point is approximately ± 45 deg from horizontal at tethered or weighted point on cable.
Book 2 (14.1)
eLE-66
Level Sensors
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Tilt Switches
Company
Information
Drives
Soft Starters
Float Level Tilt Switch Specifications
Part No.
FLS-HT-100
Price Float
Material
Sealed
Weight
Housing
Material
Polypropylene
$32.25 EPDM Rubber
(PP)
Motors
Float
Float Shape Temperature
Pressure
Specific Electrical
Range
Gravity Ratings*
Rectangle
32°F to 158°F
[0°C to 70°C]
14.5 psig
[1bar]
Max
submerged
depth 65 feet
[20 meters]
Cable
Approvals Weight
Power
Transmission
Motion: Servos
and Steppers
SPDT
3-conductor
16A
18AWG PVC
0.9 to 1.3
250VAC, 60Hz
jacket 22.9 ft
1/2 HP, 250VAC, 60Hz [7 meter]
10A, 24VDC
Motor Controls
CE
3.5
Sensors:
Proximity
Sensors:
Photoelectric
Dimensions
Sensors:
Encoders
inches [mm]
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Wiring
Sensors:
Temperature
Brown
Sensors:
Level
Black
Blue
Sensors:
Flow
Pushbuttons
and Lights
Float Level Tilt Switch Specifications
Part No.
FLS-HT-200
Price Float
Material
Sealed
Weight
Housing
Material
Polypropylene
$32.25 EPDM Rubber
(PP)
Stacklights
Float
Float Shape Temperature
Pressure Specific Electrical
Range
Gravity Ratings*
Oval
32°F to 158°F
(0°C to 70°C)
14.5 psig
[1bar] Max
submerged
depth 65 feet
[20 meters]
0.7 to 1.3
Cable
Approvals Weight
Signal
Devices
Process
SPDT
3-conductor
16A
18AWG PVC
250VAC, 60Hz
jacket 22.9 ft
1/2 HP, 250VAC, 60Hz [7 meter]
10A, 24VDC
CE
3.5
Relays and
Timers
Pneumatics:
Air Prep
Dimensions
Pneumatics:
Directional Control
Valves
inches [mm]
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Wiring
Appendix
Book 2
Brown
Terms and
Conditions
Black
Blue
Book 2 (14.1)
www.automationdirect.com/float-level-switches
Level Sensors
eLE-67
Prices as of April 15, 2015. Check Web site for most current prices.
Float Level Switches
Agency Approvals
Part Number
cURus
(E320431)
FLS-VS-100
4
UR
Class I, Group A,B,C,D /
Class II, Group E, F, G /
Class III
(E366154)
CSA
(2679134)
CSA
Class I, Group A,B,C,D /
Class II, Group E, F, G /
Class III
(2685021)
CE
4
FLS-VS-200
4
FLS-VM-100
4
4
4
FLS-VM-200
4
4
4
FLS-VM-300
4
4
4
FLS-VM-400
4
4
4
FLS-VM-500
4
4
FLS-VM-600
4
FLS-VL-010
4
4
4
FLS-VL-020
4
4
4
FLS-VL-030
4
4
4
4
4
FLS-VL-040
FLS-VL-100
4
4
4
FLS-VL-200
4
4
4
FLS-VL-300
4
4
4
FLS-VL-400
4
4
4
FLS-VL-500
4
FLS-VL-600
4
FLS-VL-900
4
FLS-HS-100
4
4
4
FLS-HS-200
4
4
4
FLS-HS-300
4
FLS-HM-100
4
FLS-HM-200
4
FLS-HM-300
4
4
4
4
4
FLS-HL-010
FLS-HL-200
4
4
4
4
4
FLS-BM-100
4
FLS-BM-200
4
FLS-BM-300
4
FLS-BL-100
4
4
4
FLS-VK-100
4
4
FLS-VK-200
4
4
FLS-VK-300
4
4
FLS-HT-100
4
FLS-HT-200
4
Book 2 (14.1)
eLE-68
Level Sensors
1-800-633-0405
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement