Kuryakyn 3159 License Plate Mounting Hole Covers Installation Instructions
Advertisement
Advertisement
I N S TA L L AT I O N t r I b a l l I c e n s e P l at e h o l e c ov e r 315 9 fIts: fIts all h-d models wIth standard 3-bolt fender mounted lIcense
Plate bracket. (also, covers the fourth hole found on some dyna and sPortster models)
Parts Included
1 Tribal License Plate Mounting Hole Cover
1 Alcohol Pad
1 Installation Instructions
Please read and understand entire instructions before starting installation.
thank you for choosIng küryakyn!
In order to Protect you and others from PossIble Injury and/ or ProPerty damage or loss, Please Pay close attentIon to all
InstructIons, warnIngs, cautIons and attentIon notes regardIng the use and care of thIs Product.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE
CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR
SERIOUS INJURY.
CAUTION! This indication alerts you to the fact that ignoring the contents described herein can result in potential injury or material damage.
ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.
tools suggested
Set of hex wrenches, soapy water and a clean rag strIctly observe the followIng guIdelInes In order to use the
Product ProPerly and avoId PotentIally dangerous accIdents.
Procedure
steP 1 Park the motorcycle on a hard, level surface; turn off the ignition.
steP 2 Remove the existing license plate, plate bracket and hardware; set it all aside, it will not be re-used.
PIc.1
steP 3 Remove any grease or debris from the installation area (see PIC.1) with soapy water and a clean rag; allow the area to dry completely.
-cont.-
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS [email protected]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
• Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
• The product must be properly installed, maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.
• Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s will be warranted for defects in materials and workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online today–select the ”CATALOGS” icon. Each Küryakyn® product comes with a Proof-of-Purchase good for a complimentary catalog. Details in packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and accessories designed for riders by riders.
©2005 Küryakyn USA All Rights reserved.
3159-11HD-0707
ATTENTION! Thoroughly clean the area of grease, oil, dirt, or other debris to ensure proper adhesion.
Küryakyn WILL NOT warranty any parts lost due to improper installation.
ATTENTION! The adhesive may not correctly bond if applied at temperatures less than 50°F. Do not attempt this installation in temperatures less than 50°F.
steP 4 Clean the area (see PIC.1) with the included alcohol cleaning pad; allow the area to dry completely. steP 5 Rub the backing on the adhesive strip to activate the adhesive before applying.
steP 6 Remove the adhesive backing.
steP 7 Press the cover into place (see PIC.2) for 1 minute to ensure proper adhesion. Full bond strength will occur within 24 hours.
Ride On!
PIc.2
Page 2 l I c e n s e P l at e h o l e c o v e r
InstallatIon

Public link updated
The public link to your chat has been updated.
Advertisement