SIEMENS
For replacement parts information or an application
guide, visit our website at www.usa.siemens.com
or contact your local Siemens sales office.
E87010-A0139-T003-A4
Instructions
January, 2016
Supersedes Issue of
April, 2015
Listed Ind
Cont Eq
A163
Size 2 Clamshell Enclosure
LR6535
Cat. No. 49EC14GB140807R
E n c o ss u r e Cover
C o v e r w thwith
O /LL O/L
R e s eReset
t
Enclosure
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR
VARIATIONS IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE
CONTINGENCY TO BE MET IN CONNECTION WITH INSTALLATION,
OPERATION OR MAINTENANCE. SHOULD FURTHER INFORMATION
BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE WHICH ARE
NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERREDTO THE LOCAL SIEMENS SALES
OFFICE.
C as e
Case
THE CONTENTS OFTHIS INSTRUCTION MANUAL SHALL NOT BECOME
PART OF OR MODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP. THE SALES CONTRACT CONTAINS THE
ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY CONTAINED IN
THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE
NEW WARRANTIES OR MODIFY THE EXISTING WARRANTY.
Note:1.
DIN rail mounting kit MTR5, sold separately, is required to
mount devices 3RA131 and 3RA132.
Description
Select device by Cat. No. from Table 1, case mounting hole
locations as speci ed in Figure 2. Tighten all screws per torques
speci cations included with devices. If a pilot device is required,
assemble and wire according to the instructions provided with each
pilot device kit.
When the O/L Reset is not needed, remove and replace with a
NEMA1 hole plug 49MZPB2.
Contents of kit: (1) enclosure case, (1) enclosure cover, (1) Reset
Button Assembly Kit, and miscellaneous self-tapping screws.
Hazardous voltage.
Can cause death, serious personal
injury, or property damage.
Disconnect power before working on
this equipment.
Figure 1
Catalog
Number
14 F,G
Mounting
Hole
Location
Mtg. Screw
Schedule by
Hole Location
A
A, B1
A, B2
A, N1, P
Self Tapping
Mounting Screw
10 - 32 x 5/16
B1
10 - 32 x 1/2 (Bimetallic
B2
10 - 32 x 5/16 (ESP
40F, G
A
3RT103,
LEN00D,
3RE413
C
3RA132
E
F
8 - 32 x 3/8
3RA133
F
K
Not provided
2: Aux.
Term DIN Rail
J
Fuse Block
Location
K
3RA131
M
CLM(2-12)0
N1
LC
N2
CLMOD
P
LEN00C 6 or 9 Pole
R
LEN00D 6 Pole
S
C
E, J, M
8 - 32 x 1/2
Plus Flat Washer
10 - 32 x 1/4 (DIN rail or
Softstart mtg. (Not provided)
N2
10 - 32 x1/2
R, S
10 - 32 x 1/2
Plus Flat Washer
Table 1
Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092
O/L)
O/L)
A5E31166528A-004
Instructions
Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092
For replacement parts information or an application
guide, visit our website at www.usa.siemens.com
or contact your local Siemens sales office.
A5E31166528A-004
">
