advertisement
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM
REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at
www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at
www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us:
(888) 88-SOURCE | [email protected] | www.artisantg.com
Defining the
Meaning of Quality in ATE
Agilent Technologies
3499 Switch/Control System
Data Sheet
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
High speed, high density, highly usable.
The Agilent 3499 gets high marks in ATE environments worldwide.
2
Performance Overview
There are three modular mainframes in the 3499 family:
• 3499B - two-slots, up to 80 channels
• 3499A - five-slots, up to 200 channels
• 3499C – 9/14 slots, up to 360 channels
The 3499C can accommodate up to nine plug-in modules that can occupy up to fourteen physical slots, thus providing a cost efficient configuration for modules that are one, two or three slots wide. All mainframe configurations of the Agilent can scan at rates up to
350 channels per second, or open/close 200 channels in less than 0.1 second.
You can choose from different plug-in modules to switch:
• electronic signals from DC to 20 GHz,
• voltages to 1,000 V, or currents to 8 A
• optical signals from 1270 to 1670 nm
All units have an efficient user interface that works equally well on the manufacturing floor and in desktop applications. High-performance switching modules, multifunction modules, built-in relay cycle counters and straightforward connections all contribute to the performance and day-to-day usability of the 3499.
Here’s what it means in the real world…
Improved Throughput
While traditional switching mainframes open/close relays in sequence, the Agilent 3499A/B/C systems use innovative parallel driving circuits to open/close switches simultaneously, significantly increasing test throughput. The systems also provide high-density modules with up to 40 channels per module.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Crimp & Insert terminal block
Total Flexibility
The 3499A/B/C mainframes accommodate a full range of modules, including multiplexers, fiber-optical multiplexers, generalpurpose relays, matrices, digital
I/O, VHF modules, RF modules, microwave modules, Form-C relays, and multifunction modules. By combining these mainframes and modules, a test system can be set up with fewer modules in less space, and the cost and complexity of the system can be reduced.
Fast Set-Up
An easy-to-use interface and industry-standard connections mean fast set-up and integration with the 3499. Usability features include:
• Standard RS-232 and GPIB interfaces
• SCPI (Standard Commands for
Programmable Instruments)
• Simplified configuration procedures
• Self-guiding front panel interface
• Easy-to-use module connection accessories
Simplify control of switch modules with Agilent TestExec SL software
(available separately). Operate switches using user-defined signal names rather than writing SCPI commands. TestExec SL includes example setups for the most popular 3499 modules.
Cost-Sensitive Test
With three mainframes and many modules to choose from, you can make sure the 3499 meets your exact needs. Build the system you need today, add more modules later as your needs change.
That means you buy only the test capability you need. Newly designed high-density switch modules further reduce the cost-of-test by combining a large number of channels on a single module. And with up to 40 switching channels per module, the 3499 reduces per-channel cost while saving rack and floor space.
You get a simpler system with fewer modules, reducing the cost of buying, owning and maintaining your system.
Learn more at www.agilent.com/find/3499
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Go Configure
Broad configuration flexibility using a wide choice of plug-in modules accounts for the wide adoption of the Agilent 3499 worldwide.
The following tables make the point. The 3499 is built for the unpredictable, ever-shifting needs of ATE.
Agilent 3499A/B/C Mainframe Specifications
Items Specifications
General
Display
Rear Panel Connectors
Power Supply
Vacuum fluorescent
GPIB; RS-232; 8-pin mini DIN Connector (5 pins for Digital I/O, 3 pins for external trigger)
Operating Environment
3499A/B: 100 to 240 VAC universal input (47 Hz to 63 Hz); 100-127 VAC (400Hz); 40 VA maximum.
3499C: 100 to 240 VAC universal input; 47 Hz to 63 Hz; 65 VA maximum.
0 °C to 55 °C, <80%RH (0 °C to 40 °C)
Storage Environment
Net Weight
Dimensions
Safety
RFI and ESD
Warranty
System
Slot Capacity
-40 °C to +70 °C
3499A: 3.8 kg (8.4 lbs);
3499B: 2.5 kg (5.5 lbs);
3499C: 7.4 kg (16.4 lbs).
3499A: H 89mm x W 426mm x L 348mm
3499B: H 89mm x W 213mm x L 348mm
3499C: H 222mm x W 426mm x L 354mm
Conforms to CSA, UL-1244, IEC 1010 Cat I
CISPR 11, IEC 80 1/2/3/4
1 year
Note: Modules with terminal blocks extend an additional 8.5cm beyond the rear of the mainframe.
Memory
Relay Setting Time
Trigger Source
External Trigger
3499A: 5 slots
3499B: 2 slots.
3499C: 9 logical slots/14 physical slots
3499A/B mainframe with controller board 1.0 (Firmware REV1.0/2.0/3.0): Capable of storing 10 instrument setups and
10 errors in SCPI mode or 40 instrument setups and 1 error in 3488A mode.
For 3499A/B/C mainframe with Controller board 2.0 (Firmware REV 4.0 or later): Capable of storing 50 instrument setups and
10 errors in SCPI mode or 40 instrument setups and 1 error in 3488A mode.
Automatically selected by the mainframe for each module.
External trigger (real panel Mini-DIN connector); GPIB bus (GET,*TRG) or RS-232 (*TRG).
Trigger pulse width: >2 µs; External trigger delay: <2ms
Built-in 4 digital I/O Input
Scan Speed
Digital I/O Block Transfer Rate
TTL compatible;V o
(L): <0.8V @ I o
= -100mA; V o
(H): >2.4V @I o
= 1mA; Vout (H) < = 42V.
350 chans/sec (equipped with N2266A)
20K bytes/sec (long word)
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Available plug-in modules include multiplexers, RF multiplexers, fiber-optical multiplexers, general-purpose relays, matrices, digital input/output, Form-C, breadboard and multifunction modules. Please refer to the following table for plug-in module selection.
Plug-in Module Specifications
Module Description Max.
Voltage
Max. Current Initial Closed Thermal Offset Bandwidth Connection Relay Cycle Page per Chan.
Channel Resistance per Chan.
Type Counter
Multiplexer Modules
N2260A
N2266A
N2270A
40-channel
40-channel
10-channel
200V
200V
1000V
44470A
44470D
10-channel
20-channel
General-purpose Relay Modules
250V
250V
N2261A
N2267A
44471A
44471D
40-channel
8-channel
10-channel
20-channel
44477A 7-channel
Matrix Modules
N2262A
44473A
4 x 8 matrix
4 x 4 matrix
200V
250V
250V
250V
250V
200V
250V
Digital I/O Modules
N2263A 32-bit TTL
44474 A 16-bit TTL
Multifunction Modules
N2264A 12 GP
3 GP
N2265A
16-bit DIO
4 x 4 matrix
16-bit DIO
42V
30V
200V
125V
42V
200V
42V
1A
0.5A
1A
2A
2A
1A
8A
2A
1A
2A
1A
2A
0.6A
0.125A
1A
5A
0.6A
1A
0.6A
Note: GP = General-purpose, DIO = Digital I/O, T = Terminal Block, C = Cable.
<1
Ω
<1
Ω
<1
Ω
<1
Ω
<1
Ω
<0.5
Ω
<0.08
Ω
<1
Ω
<1
Ω
<1
Ω
<1
Ω
NA
NA
<0.5
Ω
<0.1
Ω
NA
<1
Ω
NA
<3µV
<50µV
<200µV
<3µV
<3µV
<3µV
<3µV
<3µV
<3µV
<3µV
<3µV
<3µV
NA
NA
<3µV
<3µV
NA
<3µV
NA
10MHz T or C
40MHz T or C
5 MHz Crimp & Insert
10MHz
10MHz
T
T
10MHz T or C
20MHz Crimp & Insert
10MHz
10MHz
10MHz
T
T
T
10MHz
10MHz
NA
NA
10MHz
10MHz
NA
10MHz
NA
T or C
T
T or C
T
T or C
T or C
T or C
T or C
T or C
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
10
10
10
11
11
7
12
20
20
20
8
20
9
20
6
6
14
20
20
Fiber-optical Multiplexer Modules (typical specs)
Modules Description Insertion loss Stability
N2280A
N2281A
Quad 1 x 2
Dual 1 x 4
0.5 dB
0.5 dB
± 0.03dB
± 0.03dB
Repeatability
± 0.005dB
± 0.0065dB
Wavelength
1310/1550 nm
1310/1550 nm
N2282A Single 1 x 8
RF & Microwave Modules
0.5 dB ± 0.02dB
± 0.005/0.01dB 1270/1670 nm
Modules Description Insertion loss Cross talk
N2268A
N2272A
N2276A
N2276B
44472A
44478A
44478B
44476A
44476B
Dual 1 x 4
Single 1 x 9
Dual 1 x 6
<0.35dB
<0.5dB
<0.36dB
<-64dB
<-75dB
<-100dB
SWR
<1.20
<1.20
<1.20
Bandwidth
3.5 GHz
1.0 GHz
20 GHz
Relay driver can support 2 microwave switches. Technical specs depend on the mounted relays.
Dual 1 x 4 <0.75dB
<-85dB <1.12
300 MHz
Dual 1 x 4 <1.1dB
<-70dB <1.35
1.3 GHz
Dual 1 x 4
Triple 1 x 2
<1.1dB
<0.25dB
<-70dB
<-90dB
<1.35
<1.15
1.3 GHz
18 GHz
Relay driver can support 2 microwave switches. Technical specs depend on the mounted relays.
Module Connection Accessories
N2290A Screw terminal block for N2260A, N2266A
N2291A Screw terminal block for N2261A
N2292A Screw terminal block for N2262A
N2293A Screw terminal block for N2263A
N2294A Screw terminal block for N2264A
N2295A Screw terminal block for N2265A
N2297A 1.5 m cable for connecting DUT to N2260/1/3/4/5/6A, one DIN96-to-Twin-D50.
N2298A 1.5 m cable for connecting to DUT to N2262A, one DIN96-to-D25.
N2299A 1.5 m cable for connecting to N2260/1/3/4/5/6A, one DIN96-to-Quad D25.
N2327A Crimp & Insert Connection kit for N2267A
N2320A Crimp & Insert Connection kit for N2270A
Connector Switching Time
SC/APC 15 ms
SC/APC 20 ms
SC/APC 250 ms
Impedance Connector
50
Ω
50
Ω
50
Ω
SMA
BNC
SMA
50
Ω
50
Ω
75
Ω
50
Ω
BNC
BNC
BNC
SMA
16
20
19
13
15
16
19
18
18
17
17
17
Learn more at www.agilent.com/find/3499
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MODULES
2-wire, 40-channel Multiplexer Modules
Agilent N2260A, N2266A
• High speed switching
• Reconfigurable to 1, 2, and
4-wire mode
• Built-in relay cycle counters
The N2260A and N2266A are highdensity reconfigurable multiplexer
(MUX) modules for high-throughput production test. They can be operated in either SCPI or 3488A mode. In SCPI mode, they can be configured in any of the following ways:
• one 80-channel, 1-wire MUX
• one 40-channel, 2-wire MUX
• dual independent 20-channel
2-wire MUXs
• one 20-channel 4-wire MUX.
Up to five N2260/66As can be included in an 3499A mainframe to build a 1to 200-channel, 2-wire MUX. Screw terminal block, crimp & insert terminal block, and DIN96-to-D50/25 cables are available for ease of wiring. The N2266A can scan at up to 350 channels/second.
Low thermal offset voltage makes the
N2260A ideal for low-level signal switching.
N2260A/66A MUX Module Terminal Block
L
H
CH 00
L
H
CH 00
L
H CH 09
COMMON BUS
L
H
CH 10
L
H
CH 09
L
H
COM 0
L
H
CH 10
BANK 0
L
H
CH 19
T98
L
H
CH 19
SE-COM
T99
L
H
CH 20
L
H
CH 20
L
H
CH 29
COMMON BUS
L
H
CH 30
L
H
CH 29
L
H
COM 1
L
H
CH 30
BANK 1
L
H
CH 39
L
H
CH 39
Specifications
General Specifications
Relays:
N2266A
N2260A
Thermal Offset:
N2266A
N2260A
Reed non-latching relay
Armature latching relay
<50µV
<3 µV
Relay Life:
N2266A
N2260A
Mechanical:
Electrical:
10 9 @ 1V, 1mA
10 8
5x10 5 @ 1A
Maximum Scan Rate:
N2266A 350 Chan./sec
N2260A 80 Chan./sec
Input Characteristics
Maximum Current:
N2266A
N2260A
0.5A DC or AC peak
1A
Maximum Voltage: 200V
(AC peak for N2266A)
Maximum Power:
N2266A 10W DC or AC peak
N2260A 60W or 62.5VA
Initial Closed Channel Resistance:
<1
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10 10
Ω
HI-LO:
<(40°C, 50% RH) >10 10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10 10
Ω
Note: All voltage and current are in DC or AC
RMS if not specified.
AC Isolation/Performance
Capacitance (with 1 channel closed):
Open Channel, Channel-Channel
N2266A <7pF
N2260A <7pF
HI-LO
N2266A <50pF
<75pF N2260A
Channel-Chassis
N2266A
N2260A
<140pF
<150pF
Insertion Loss (with 50 Ohm termination):
N2266A
100kHz <0.20dB
1MHz
10MHz
40MHz
<0.30dB
<2.0 dB
<3.0 dB
N2260A
100kHz
1MHz
<0.20dB
<0.25dB
Crosstalk (with 50 Ohm termination):
N2266A
100kHz
1MHz
10MHz
<-75dB
<-55dB
<-33dB
N2260A
100kHz
1MHz
<-70dB
<-50dB
Module Accessories
N2290A
N2296A
N2297A
N2299A
Screw terminal block for N2260A, N2266A
Crimp & insert terminal block
DIN96-to-Twin-D50 cable
DIN96-to-Quad-D25 cable
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MODULES
40-channel General-purpose Relay Module
Agilent N2261A
• 40 independent relays in one module
• High-speed switching in parallel operation
• Built-in relay cycle counters
The N2261A general-purpose relay module provides 40 independent single-pole-single-throw (SPST) latching relays. Each channel can switch up to 200 V, 1 A, and 60 W or
62.5 VA. The innovative parallel driving circuits allow 10 channels to be operated simultaneously for high throughput. It can be operated in either SCPI mode or 3488A mode.
A pair of signals can be switched together by using a pair of channels on two N2261A modules. The N2261A can be operated in single-channel break-before-make (BBM) or multiplechannel open/close mode. Screw terminal block, crimp & insert terminal block and DIN96-to-D25/50 cables are available to simplify wiring.
N2261A GP Relay Module Terminal Block
L
H
CH 39
L
H
CH 39
L
H
CH 20
L
H
CH 19
L
H
CH 20
L
H
CH 19
L
H
CH 00
L
H
CH 00
Specifications
General Specifications
Relays:
Thermal Offset:
Armature latching relay
<3µV
Relay Life
Mechanical:
Electrical:
10 8
5x10
5
( at 1A load)
Maximum Scan Rate:
80 Chan/sec
Input Characteristics
Maximum Voltage: 200V
Maximum Current:
Per channel
Per module
1A
20A
Maximum Power:
Per channel
Per module
60W or 62.5VA
1200W or 1250 VA
Initial Closed Channel Resistance:
<0.5
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10
10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10 10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel,
Channel-Channel <10pF
Channel-Chassis <20pF
Insertion Loss (with 50
Ω termination):
100kHz <0.10dB
1MHz <0.20dB
10MHz <0.50dB
Crosstalk (with 50
Ω termination):
100kHz <-70dB
1MHz
10MHz
<-50dB
<-30dB
Module Accessories
N2291A
N2296A block
N2297A
Screw terminal block
Crimp & insert terminal
DIN-to-Twin-D50 cable
N2299A DIN-to-Quad-D25 cable
Note: All voltage and current are in DC or AC
RMS if not specified.
Learn more at www.agilent.com/find/3499
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7
MODULES
4 x 8 Matrix Module
Agilent N2262A
• Multiple inputs connecting to multiple outputs
• High-speed switching in parallel operation
• Built-in relay cycle counters
The N2262A 4x8 matrix module contains 32 cross points organized in a
4-row by 8-column configuration. It provides a convenient way to connect a group of test instruments to multiple test points on DUTs. Each cross point in the module switches two wires for the high and low measurement.
Multiple matrix modules can be connected for applications that require large matrices. For example, four
N2262As can be combined as a 16x8 matrix. N2262As can be used in conjunction with other modules (such as multiplexer modules) to provide a wide variety of switching combinations.
More than one switch can be closed at the same time, allowing any combination of rows to be connected to columns.
Up to eight channels can be operated in parallel for high-speed switching.
Three module accessories are available to simplify wiring.
COL0
H L
COL1
H L
COL7
H L
CHANNEL 31
(ROW 3, COLUMN 1)
H
L
ROW0
H
L
ROW1
H
L
ROW2
H
L
ROW3
Specifications
General Specifications
Relays: Armature latching relay
<3µV Thermal Offset:
Relay Life
Mechanical:
Electrical:
10 8
5x10
5
( at 1A load)
Input Characteristics
Maximum Voltage: 200V
Maximum Current:
Per channel
Per module
1A
4A
Maximum Power:
Per channel
Per module
60W or 62.5VA
240W or 250 VA
Initial Closed
Channel Resistance: <1
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10 10
Ω
HI-LO:
<(40°C, 50% RH) >10
10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10 10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel, Channel-Channel
<7pF
HI-LO <30pF
Channel-Chassis <50pF
Insertion Loss (with 50
Ω termination):
100kHz <0.10dB
1MHz <0.20dB
10MHz <0.60dB
Crosstalk (with 50
Ω termination):
100kHz <-73dB
1MHz
10MHz:
<-53dB
<-28dB
Module Accessories
N2292A
N2296A block
N2298A
Screw terminal block
Crimp & insert terminal
DIN96-to-D25
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MODULES
32-Bit Digital Input/Output Module
Agilent N2263A
• TTL compatible, sinking up to 0.6 A
• Input /output configurable byte-by-byte
• Three I/O control modes: static, strobe, and handshake
The N2263A provides 32-bit bidirectional lines and three handshake and control lines. The 32-bit I/O lines are TTL compatible input/output, or
TTL compatible input and open collector output up to 42 V. The 32-bit
I/O lines can be addressed individually
(byte-by-byte), either as a 32-bit port, four independent 8-bit ports, or as two independent 16-bit ports. A Zener diode is used in each channel for input voltage over-protection (> 42 V DC), including ESD protection. Each I/O line can sink up to 0.6 A to control external devices, including:
• High-voltage/high current relays
• Microwave relays and attenuators
(8710xx , 876xx and 849xx)
• Solenoid coils
The polarities of the I/O and handshake lines can be operated in positive or negative logic mode. With the three control lines (PCTL, I/O, and PFLG), you can define five handshake modes for communication with peripherals.
Screw terminal block, crimp & insert terminal block, and DIN96-to-D25/50 cables are available for simple wiring.
OPEN COLLECTOR/
CURRENT SINK
(VMOS FET)
DRIVER OUTPUT
+5V
10K
60V
INPUT SENSE
PCTL or I/O
Handshake Signal
215
REFERENCE
VOLTAGE
+5V
Resetable Fuse
+t
+5V
10K
PFLG Handshake Signal
+5V
Resetable Fuse
215
+5V
10K
+t
ONE I/0 LINE
TERMINAL
CONNECTION
BLOCK
TERMINAL
CONNECTION
BLOCK
TERMINAL
CONNECTION
BLOCK
Specifications
I /O Lines
Maximum Voltage(line-chassis):
+42V DC
Maximum Sink Current(per bit):
0.6A
Output Characteristics:
V out
V
(high) out
(low)
≥ 2.4V @
I
≤ 10mA output
≤ 0.8V @
I
≤ 600mA input
Input Characteristics:
V in
V in
(high)
(low)
≥ 2.0V
≤ 0.8V
Handshake Lines
Maximum Voltage(line-chassis):
+5V DC
Output Characteristics:
V out
(high)
≥ 2.4V @
V out
(low)
I
≤ 400µA output
≤ 0.5V @
I
≤ 1mA input
I out
(low) <25 mA ( when shorted to + 5V )
Input Characteristics:
V in
V in
(high)
(low)
≥ 2.0V
≤ 0.8V
Module Accessories
N2293A
N2296A
Screw terminal block
Crimp & insert terminal block
N2297A DIN96-to-
Twin-D50 cable
N2299A DIN96-to-
Quad-D25 cable
Learn more at www.agilent.com/find/3499
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9
MODULES
Multifunction Module
Agilent N2264A
• 12 + 3 GP + 16-bit digital I/O in one module
• High-speed switching in parallel operation
• Built-in relay cycle counters
The Agilent N2264A multifunction module combines 12 general-purpose relays, three high-current relays, and 16-bit digital input/output in one module, saving cost and space.
Its three high-current channels are especially useful in automated test systems for cellular phone test or battery test, where only two or three low-resistance channels are needed.
Four connection accessories simplify wiring.
The 12 general-purpose channels are non-latching relays that can switch up to 200 V, 1 A, 60 W or 62.5 VA. The three high-current channels are nonlatching relays switching up to 5 A,
125 V DC, or 200 V AC RMS. The 16-bit digital I/O provides 16 bi-directional data lines (bits) plus three lines used for control and handshaking. The 16-bit I/O lines are TTL compatible input/output, or
TTL compatible input and open collector output. The 16 I/O bits can be addressed individually, as two independent 8-bit ports, or as one
16-bit port. A Zener diode is used in each channel for input overvoltage protection (>42 V DC), including ESD protection. Each I/O line can sink up to 0.6 A to control external devices.
N2264A Multifunction Module
12-Channel GP Relay
L
H
L
H
Terminal Block
L
H
L
H
CH 00
CH 01
L
H
L
H
3-Channel High-Current GP Relay
L
H
L
H
L
H
16-Bit Digital I/O
OPEN COLLECTOR/
CURRENT SINK
(VMOS FET) +5V
10K
Bits 30-45 (ONE I/O LINE)
DRIVER OUTPUT
60V
TERMINAL
CONNECTION
BLOCK
L
H
L
H
CH 10
CH 11
L
H
L
H
L
H
CH 20
CH 21
CH 22
INPUT SENSE
REFERENCE
VOLTAGE
PCTL or I/O
Handshake Signal
215
+5V
Resetable Fuse
+t
+5V
10K
PFLG Handshake Signal
+5V
Resetable Fuse
+5V
10K
215
+t
TERMINAL
CONNECTION
BLOCK
TERMINAL
CONNECTION
BLOCK
Specifications
12-channel General-purpose Relay
General Specifications
Relays: Armature non-latching relay
<3µV Thermal Offset:
Relay Life
Mechanical: 10 8
Electrical: 5x10 5 ( at 1A load)
Maximum Scan Rate: 80 Chans./ sec
Input Characteristics
Maximum Voltage: 200V
Maximum Current:
Per channel 1A
Maximum Power:
Per channel 60W; 62.5VA
Initial Closed
Channel Resistance: <0.5
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10 10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel, Channel-Channel
<10pF
Channel-Chassis <20pF
For 16-bit Digital I/O specifications, please refer to the Agilent N2263A.
3-channel High-current Relay
General Specifications
Relays: Armature non-latching relay
Relay Life
Mechanical:
Electrical:
Thermal Offset:
5x10
10 5
7
( at 5A load)
<3µV
Time to close one channel:
16ms
Input Characteristics
Maximum Voltage: 125V DC or 200 V AC
Maximum Current: 5A
Maximum Power: 150W; 1250 VA
Initial Closed Channel Resistance:
<0.1
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10 10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10 10
Ω
Module Accessories
N2294A
N2296A
N2297A
Screw terminal block for N2264A
Crimp & insert terminal block
DIN96-to-Twin-D50 cable
N2299A DIN96-to-Quad-D25 cable
Note: All voltage and current are in DC or AC
RMS if not specified.
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MODULES
Multifunction Module
Agilent N2265A
• 4x4 matrix and 16-bit digital
I/O in one module
• High speed switching in parallel operation
• Built-in relay cycle counters
The N2265A multifunction module combines a 4x4 two-wire matrix and
16-bit digital I/O in one module to save floor space while reducing costs.
It includes four connection accessories to simplify wiring. The 4x4 matrix
(including 16 crosspoints) provides the most convenient way to connect a group of test instruments to multiple test points on DUTs. Each crosspoint in a module switches two wires for the high and low measurement. The
N2265A includes 16 bi-directional data lines (bits) plus three handshake lines.
The 16-bit I/O lines are TTL compatible input/output, or TTL compatible input and open collector output. The 16 I/O bits can be addressed individually, as two 8-bit ports, or one 16-bit port. A
Zener diode is used in each channel for input over voltage protection (>42 V DC) and ESD protection. Each I/O line can sink up to 0.6 A to control external devices.
N2265A Multifunction Module
COL0
H L
4 x 4 2-Wire Matrix
COL1 COL2 COL3
H L H L H L
Specifications
4 x 4 Matrix
16-Bit Digital I/O
OPEN COLLECTOR/
CURRENT SINK
(VMOS FET) +5V
10K
DRIVER OUTPUT
CHANNEL 32
(ROW 3, COLUMN 2)
60V
H
L
ROW0
H
L
ROW1
H
L
ROW2
H
L
ROW3
Bits 40-55
ONE I/0 LINE
INPUT SENSE
REFERENCE
VOLTAGE
+5V
PCTL or I/O
Handshake Signal
215
+5V
Resetable Fuse
10K
+t
PFLG Handshake Signal
+5V
Resetable Fuse
215
+5V
10K
+t
TERMINAL
CONNECTION
BLOCK
TERMINAL
CONNECTION
BLOCK
TERMINAL
CONNECTION
BLOCK
General Specifications
Relays: Armature latching relay
Relay Life
Mechanical: 10 8
Electrical: 5x10 5 (at 1A load)
Maximum Scan Rate: 80 Chans./ sec
Input Characteristics
Maximum Voltage: 200V
Maximum Current:
Per channel:
Per module:
1A
4A
Maximum Power:
Per channel:
Per module:
60W or 62.5VA
240W or 250 VA
Initial Closed
Channel Resistance: <1
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10 10
Ω
HI-LO:
<(40°C, 50% RH) >10 10
Ω
Channel-Chassis
<(40°C, 50% RH) >10 10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel, Channel-Channel
<7pF
HI-LO <25pF
Channel-Chassis <40pF
Insertion Loss (with 50
Ω termination):
100kHz <0.10dB
1MHz <0.20dB
10MHz <0.60dB
Crosstalk (with 50
Ω termination):
100kHz <-76dB
1MHz
10MHz
<-56dB
<-33dB
16-bit Digital I/O
I /O Lines
Output Characteristics:
V
V
V in out out
(high)
(low)
I
≤ +42V DC @ sink
≤ 0.6A
≥ 2.4V @
I
≤ 10mA output:
≤ 0.8V @ I ≤ 0.6A input
Input Characteristics:
V
V in in
(high)
(low)
≥ 2.0V
≤ 0.8V
Handshake Lines
V in
V out
(high)
V
V
V out in in
(low)
(high)
(low)
Module Accessories
N2295A
N2296A
≤ 5V DC
≥ 2.4V @
I
≤ 400µA output
≤ 0.5V @
I
≤ 1mA input
≥ 2.0V
≤ 0.8V
N2297A
N2299A
Screw terminal block
Crimp & insert terminal block
DIN96-to-Twin-D50 cable
DIN96-to-Quad-D25 cable
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11
MODULES
8-channel General-purpose Relay Module
Agilent N2267A
• Switching up to 8 A, 250 V
• Built-in overheat protection for high reliability
The N2267A is designed for highcurrent (up to 8 A continuous), lowresistance switching applications, such as AC/DC power supply testing.
It can also be used to switch on/off AC
(up to 250 V) or DC (up to 125 V) power supplies and current sources. Each channel can carry 8 A current at the same time. For thermal protection and reliability, the N2267A has built-in temperature control circuitry that uses sensor ICs and a cooling fan. An overtemperature warning signal is also available to activate an external LED or buzzer. A crimp & insert connector
(N2327A) is available. A protection network area is provided on the module’s PCB, for switching inductive loads such as electric motors, solenoids, contacts, chokes, electromagnets and incandescent lamps. To protect relays from overvoltage damage, the RC network or the varistors must be placed on this module, which can effectively absorb the surge voltage.
N2267A GP Relay Module
Connection Kit
L
H
L
H
L
H
L
H
CH 0
CH 1
L
H
L
H
CH 7
Specifications
General Specifications
Relays:
Thermal Offset:
Relay Life
Mechanical:
Non-latching relay
<3µV
5 x 10 7 (180cpm)
Electrical: 10 5
Maximum Scan Rate: 20 Chans./ sec
Input Characteristics
Maximum Current:
(per channel)
(per module)
8A
64A
Maximum Voltage: 125 VDC, 250VAC
Maximum Power:
Per channel
Per module
150W or 2000VA
1200W or 16000 VA
Initial Closed Channel Resistance:
<0.08
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10 10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10 10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel, Channel-Channel
<10pF
Channel-chassis <10pF
Insertion Loss (with 50
Ω termination):
100kHz <0.10dB
1MHz <0.20dB
Crosstalk (with 50
Ω termination):
100kHz <-75dB
1MHz <-55dB
Module Accessories
N2327A Crimp & insert connection kit for
N2267A
Note: All voltage and current are in DC or AC
RMS if not specified.
12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MODULES
Dual 1 x 4 RF Multiplexer (3.5 GHz, 50
Ω)
Agilent N2268A
• Ideal for wireless communication test
• Insertion loss <1.7 dB at
3.5 GHz
The N2268A multiplexer module has two 1x4 independent multiplexers with
SMA connectors, delivering high performance, very low insertion loss, high isolation, and excellent VSWR performance. This high-density RF multiplexer module is an economical
RF signal switching solution. Its
3.5 GHz bandwidth guarantees signals will not be degraded when switched from source to destination. Each group of four channels is isolated from the other and from the chassis to prevent ground loops. The wide-bandwidth performance enables quality dynamicrange RF signal measurements using oscilloscopes, spectrum analyzers, network analyzers, and GSM/CDMA test sets. Typical test applications include switching signals of Bluetooth transceivers and L1/L2 GPS receivers,
1.8/1.9 GHz wireless communication devices (such as GSM, CDMA, 3G,
DCS1800, and PCS1900 base stations), and mobile phones. It can be also used to route satellite signals.
CH 00
CH 01
CH 00 Group 00
CH 02
CH 03
CH 10
CH 11
CH 10 Group 10
CH 12
CH 13
Specifications
Input Characteristics
Maximum Scan Rate: 20 Chans./ sec
Maximum Voltage: 30V, DC+AC peak
Maximum Current: 0.5A, DC+AC peak
Maximum Power:
(per channel) 10W
Characteristic Impedance:
50
Ω
DC Performance
Thermal Offset: <3µV (<2µV, typ.)
Initial Closed Channel Resistance:
<1
Ω
Insulation Resistance (between terminals):
<(40°C, 50% RH) >10 10
Ω
Capacitance
Center-Center
Center-Shield
Rise Time:
Signal Delay:
<0.06pF
<20pF
<150psec
<1.5nsec
AC Performance
Insertion Loss
1 GHz
2 GHz
2.5 GHz
3.5 GHz
<0.9dB
<1.2dB
<1.4dB
<1.7dB
Crosstalk (Channel-Channel,
Channel-Common)
1 GHz <-64dB
2 GHz
2.5 GHz
3.5 GHz
VSWR
1 GHz
<-64dB
<-50dB
<-50dB
2 GHz
2.5 GHz
3.5 GHz
<1.20
<1.35
<1.35
<1.35
Learn more at www.agilent.com/find/3499
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
13
MODULES
10-channel 1000V Multiplexer
MODULES
Agilent N2270A
• Switching up to 1 A, 1000 V
• Ideal for breakdown and leakage testing
N2270A MUX Module
Connection Kit
L
H
L
H
L
H
CH 0
L
H
CH 1
L
H
L
H
CH 9
L
H
COM
The N2270A 2-wire multiplexer can be used to source external voltage up to
1000 V from the common end to any of
10 DUTs, or to monitor voltage from different sources using a voltmeter.
It can be used in a scanner application where only one channel is closed at a time, or in distribution applications where several channels are simultaneously closed. Applications include capacitor breakdown voltage testing as well as high-resistance measurements of transformers, capacitors, relays, connectors, PCBs, and cables. A crimp & insert connection kit is designed to work with
N2270A. High-voltage signals can be wired to the N2320A, which can be plugged into the connector on a
N2270A.
Specifications
General Specifications
Relays:
Thermal Offset:
Non-latching reed relay
<200µV
Relay Life: 10 8 @ 1V, 10mA
Maximum Scan Rate: 100 Chans./ sec
Input Characteristics
Maximum Current: 1 A
Maximum Voltage: 1000V
Maximum Power: 10W
Initial Closed Channel Resistance:
<1
Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) > 10 10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10 10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel, Channel-Channel
HI-LO
≤7pF
Channel-Chassis
≤50pF
Insertion Loss (with 50
Ω termination):
100kHz <0.10dB
1MHz <0.20dB
Crosstalk (with 50
Ω termination):
100kHz <-70dB
1MHz <-50dB
Module Accessories
N2320A Crimp & insert connection kit for
N2270A
Note: All voltage and current are in DC or AC
RMS if not specified.
The N2270A occupies 2 slots.
14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
14
MODULES
1 x 9 RF (1GHz) Multiplexer Module
Agilent N2272A
• Ease of channel density extension
• Ideal for high density RF signal routing
• Ease of wiring with BNC connectors
MODULES
The N2272A RF high-density module provides a 1x9 multiplexer that can be widely used in RF test and measurement system. It consists of a series of eight
RF latching relays in a tree structure.
The module’s low insertion loss, high isolation and excellent VSWR performance guarantee that the RF signals will not be degraded when routed from source to destination. In order to decrease the degradation when cascading, the auxiliary channel
(channel 08) with smaller insertion loss and lower VSWR, is provided.
In order to extend the channel count, channel 08 can be connected to the
COM channel of the next N2272A module. It can also be used as a standard channel. BNC connectors on the module's front panel are provided for ease of wiring.
The N2272A can only be operated in
SCPI mode when installed in 3499A/B mainframes with firmware 3.0 or later.
CH00
CH01
CO02
CH03
CH04
CH05
CH06
CH07
AUX/CH08
Specifications
Input Characteristics
Total Channels: 9
Maximum Voltage: 24V
Maximum Current:: 1A
Maximum Power: 24W
Characteristic Impedance:
50
Ω
Connector: BNC
Relay life
Mechanical 5x10 6
Electrical (24V@1A DC)
10 5
COM
AC Performance
Insertion Loss
Crosstalk (Channel-Channel)
VSWR
DC Performance
Thermal Offset: <8µV
Initial Closed Channel Resistance:
<0.8
Ω
Insulation Resistance (between terminals):
<(25°C, 50% RH) >10 10
Ω
Capacitance:
Center-Center <0.006pF
Center-Shield
Rise Time:
Signal Delay:
<60pF
<500psec
<2.5nsec
100 MHz 300MHz 800 MHz 1 GHz
<0.5dB
<0.8dB
<1.8dB
<2.5dB
<-75dB
<1.20
<-65dB
<1.30
<-55dB
<1.35
<-50dB
<1.55
15
Learn more at www.agilent.com/find/3499
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
15
MODULES
Dual 1x6 Microwave (20GHz) Multiplexer
MODULES
Agilent N2276A/B
• Quick set-up microwave switching to save integration time
• Modular microwave switching to fit each application
• Can also drive two external microwave attenuators
The 3-slot N2276A module (option 206) provides dual 1 x 6 microwave multiplexers, with excellent insertion loss, isolation and VSWR performance.
With option 204, the N2276A becomes a dual 1 x 4 microwave multiplexers, while keeping all the other features.
The modular N2276A can exactly fit your application channel density needs, minimizing the redundant channel, thus offering the most cost effective microwave switching. The SMA connectors on module's front panel are provided for high performance connections. The N2276A can also drive two external microwave attenuators (Agilent 84904/6/7/K/L).
The N2276B module is a microwave multiplexer/attenuator driver, deleting the microwave relays from the N2276A.
Offering the most flexibility, it can drive
Specifications
Total Channels (N2276A)
Dual 1 x 4 (option 204)
Dual 1 x 6 (option 206)
Connector
Frequency range
Insertion loss
SMA
DC to 20 GHz
Isolation
0.3 dB + 0.015 dB * frequency (GHz)
>100dB @12 GHz;
>80dB@15 GHz;
>70dB @20 GHz
VSWR <1.2@4 GHz;
< 1.35 @12.4 GHz;
<1.45@18 GHz;
<1.7@20 GHz
Repeatability (5M cycle @25C°)
< 0.03dB
Switching time
Switch life
25ms
5 M cycles any two 1x4 or 1x6 microwave relays
(Agilent 87104A/B/C, Agilent 87106A/B/C).
A custom microwave multiplexer module can be built with the N2276B and microwave relays, eliminating the external power supply or digital I/O that are used in previous customer-built microwave switching. Two 1.5m ribbon cables are included for connecting to external microwave relays. It can also drive two external microwave attenuators (Agilent 84904/6/7/K/L).
The N2276A/B can be used in the testing of cellular phone, cordless phone, mobile radios, cellular base station, broadband wireless communication transceivers, RFICs, and high-speed digital circuits.
The N2276A/B can only be operated in
SCPI mode when installed in 3499A/B mainframes with firmware 3.0 or later.
Module Accessories
87104A/B/C
87106A/B/C
84904/6/7/K/L
SP4T microwave relays (4, 20, 26.5 GHz)
SP6T microwave relays (4, 20, 26.5 GHz)
0-11dB, 0-90dB, 0-70dB microwave attenuators
(26.5, 40 GHz)
16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
16
MODULES
1x2, 1x4 and 1x8 Optical Multiplexer Module
MODULES
Agilent N2280A, N2281A and
N2282A
• Ideal for optical and electronic hybrid test system
• Modular optical switching to fit each test application
• High repeatability for accurate signal routing
N2280A MUX Module
CH 00
CH 01
Normally
Closed
COM 3
CH 30
CH 31
Normally
Closed
Powered State
COM 0
N2281A MUX Module
CH 00
CH 01
CH 02
Normally
Closed
CH 03
COM 1
CH 10
CH 11
CH 12
CH 13
Normally
Closed
COM
Powered State
N2282A MUX Module
CH00
CH01
CH02
CH03
CH04
CH05
CH06
CH07
The N2280A (Quad 1 x 2), N2281A
(Dual 1 x 4) and N2282A (1 x 8) optical modules bring the flexibility of modular optical switching based on the Agilent
3499 switching family. The optical switching modules, combined with other 3499 family electronic modules, provide a total switching solution in hybrid test systems. With this modular optical switching, test engineers can set up an ATE system with just enough optical switching channels to fit the current application, and add more channels later as the application grows. The collimating lenses optical relays in the N2280A/81A/82A minimize the switching insertion loss, and improve the switching repeatability and stability. These three modules are ideal for SONET/SDH test, fiber-optical component test, and fiber-optical
Specifications
Relay Life:
Fiber type:
>10
7
(cycle) Optical
9/125
Wavelength Range:
N2280A/N2281A 1310/1550nm
N2282A 1270/1670nm
Insertion loss (SM):
N2280A/N2281A
≤ 0.8dB
N2282A
≤ 0.7dB
Return loss 1 (SM):
N2280A/N2281A
≥ 55dB
N2282A
≤ 57dB
Polarization dependent loss (SM):
N2280A/N2281A
≤ 0.07dB
N2282A
≤ 0.04dB
Insertion loss stability 2 :
N2280A/N2281A
≤ ±0.05dB
N2282A
≤ ±0.025dB
network monitoring. They can also be used in fiber-optical network configuration and multi-source selection/measurement. Two channels in different modules can be synchronously switched with the
"CARD PAIR" command. These modules are optically passive operate independently of data rate, data format and optical signal direction; therefore, are transparent to signaling formats.
The SC/APC connectors provide reliable and easy connection. A
N2280A/81A/82A module occupies two slots in a 3499A/B mainframe. The
N2282A can only be operated in SCPI mode when installed in 3499A/B mainframes with firmware 3.0 or later.
The N2282A extends an additional
8.5cm beyond the rear of the mainframe.
Repeatability:
N2280A
N2281A
≤ ±0.005dB
≤ ±0.0065dB
N2282A(Sequential)
≤ ±0.01dB
N2282A(Random)
≤ ±0.05dB
Crosstalk:
N2280A/N2281A
≤ -60dB
N2282A
≤ -90dB
Optical input power:
≤ 300mW
Switching time:
N2280A
N2281A
N2282A
≤ 20ms
≤ 25ms
≤ 250ms
Connectors: SC/APC
Note 1: Excluding connectors.
Note 2: After one-hour warm-up. Drift of any channel relative to an assigned reference channel at ±3°C deviation of ambient temperature over a seven-day period.
1
Excluding connectors, 0.2dB typical connector insertion loss.
2
Excluding connectors.
3
Drift of any channel relative to an assigned reference channel at ±3°C deviation of ambient temperature over a seven-day period.
Learn more at www.agilent.com/find/3499
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
17
MODULES
Microwave Multiplexer Module
MODULES
Agilent 44476A
• Switching signals from DC to
18 GHz
• Triple 1-to-2 microwave multiplexers
Form C
Drive Relays
1
Drive
Jumpers
W1
ORG
HP8762B
2
50
Ω
The 44476A includes three independent SPDT 50
Ω coaxial relays with excellent electrical performance from DC to 18 GHz. For general-purpose microwave switching applications, the module can be used to switch separate signal sources for a multi-band receiver/transmitter testing application. The 3 mm SMA connector
MODULE*
PANEL
DESIGNATORS
on the module edge simplifies wiring.
1 = PORT 1
2 = PORT 2
NO = NORMALLY OPEN
NC = NORMALLY CLOSED
C = COMMON
2 NO
Relay
K901
COM
NO
+5
NC
2 YEL C
C C Channel 00
50
Ω
3 ORG 1 1 NC
1
Relay
K902
COM
NO
+5
NC
2
3
W2
ORG
YEL
HP8762B
2
C
ORG 1
50
Ω
Specifications
Input Characteristics
Frequency Range: DC to 18 GHz
Characteristic Impedance:
50
Ω
Input Power Rating: 1 W average
(Also less than ± 7 V DC)
100 W peak
Repeatability (after 10 6 operation):
0.03 dB
Connector: SMA
AC Isolation / Performance
Isolation:
DC-18GHz
Insertion Loss:
DC-2 GHz
DC-18GHz
VSWR (3 mm SMA):
DC-2GHz
DC-12.4GHz
DC-18.0GHz
>90 dB
<0.25 dB
<0.50 dB
<1.15 dB
<1.25 dB
<1.40 dB
50
Ω
2 NO
C C Channel 01
1 NC
1
W3
ORG
HP8762B
2
Relay
K903
COM
NO
+5
NC
2 YEL C
3 ORG 1
+5V
L901
+5 TO DRIVE JUMPERS (YEL)
C906
50
Ω
50
Ω
2 NO
C C
1 NC
* NOTE: Terminal designations inside the dashed boxes refer to the HP8762B only.
Module panel designators outside the dashed boxes are those silkscreenedon the
HP44476A panel. Any reference in this manual to a port refers to the module panel designators.
Channel 02
Microwave Relay Driver Module
Agilent 44476B
• Supporting varieties of microwave coaxial relays
• Two set mounting holes for coaxial relays
Form C
Drive Relays
1
Drive
Jumpers
W1
ORG
Relay
K901
COM
Relay
K902
COM
Relay
K903
COM
NO
+5
NC
NO
+5
NC
NO
+5
NC
2
3
1
2
3
1
2
YEL
ORG
W1
ORG
YEL
ORG
USER
INSTALLED
MICROWAVE
SWITCH
Channel 00
USER
INSTALLED
MICROWAVE
SWITCH
Channel 01
CHANNEL 02
AVAILABLE
BUT NOT
USED
The 44476B brings multi-port 50/75
Ω coaxial switching flexibility to your test system. It has two set mounting panels, so any two Agilent 876XX coaxial switches can be mounted.
The coaxial switches come in three-, four-, and five-port configurations.
This flexibility allows you to use the different switches for a variety of applications, constructing transfer switches, switch matrices and more.
Using the 876XX in conjunction with the
44476B allows you to extend your automated three-port switching to
26.5 GHz. Coaxial relays must be ordered separately when using with this module. The coaxial switches that can be used are listed below.
Option 011 designates the switches for a coil voltage of 5 V DC.
3
L901
18
+5V
+5 TO DRIVE JUMPERS (YEL)
C906
Agilent Technologies
Coaxial Switch Port
8762A/Option 011 3
8762B/Option 011 3
8762C/Option 011 3
8762F/Option 011 3
8763B/Option 011 4
8763C/Option 011 4
Frequency
DC to 4 GHz
DC to 18 GHz
DC to 26.5 GHz
DC to 4 GHz
DC to 18 GHz
DC to 26.5 GHz
8764B/Option 011 5
8764C/Option 011 5
DC to 18 GHz
DC to 26.5 GHz
Note: For details of Agilent 876XX specifications, please refer to publication number 5968-4314.
18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MODULES
Dual 1 x 4 RF Multiplexer (1.3 GHz, 50/75
Ω)
MODULES
Agilent 44478A/B
• Switching up to 1 A, 24 W or
24 VA
• Insertion loss less than 1.9 dB at 1.3 GHz
The 44478A/B multiplexer module is an ideal choice for broadband switching of high-frequency or fast pulse signals.
Dual 1-to-4 multiplexers provide bidirectional switching of signals from
DC to 1.3 GHz. High channel isolation
(>55 dB at 1 GHz) assures quality dynamic-range measurements using spectrum, network, or distortion analyzers. Each 1-to-4 multiplexer consists of seven relays in a "tree" structure, which provides high isolation and low VSWR (voltage standing wave ratio). All the connectors on the module’s edge are female BNC for ease of wiring.
Off-channels can be terminated in resistors to maintain proper operation of DUT circuitry. Simply plug a 50/75
Ω
SMB-type resistive termination onto the on-board male SMB connectors provided for each channel.
J101
3
CH00
CH01
J102
3
J104
3
COM00 GROUP 00
CH02
3
CH03
BNC CONNECTOR
J105
3
J106
4
SMB CONNECTOR
CH10
CH11
J107
4
J109
4
COM10
CH12
CH13
J110
4
4
TYPICAL CHANNEL RESISTIVE TERMINATIONS
For 44478A, R=50
Ω (or 75Ω)
For 44478B, R=75
Ω
ChXX
GROUP 10
Specifications
Input Characteristics
Maximum Scan Rate: 43 Chans./ sec
Maximum Voltage: 42V, DC+AC peak
Maximum Current: 1A
Maximum Power:
(Per channel) 24W, 24VA or 44dBm
Characteristic Impedance:
44478A: 50
Ω
44478B: 75
Ω
DC Performance
Thermal Offset: <6µV (<2µV, Typ.)
Initial Closed Channel Resistance:
<1
Ω
Insulation Resistance (between terminals):
<(25°C, 40% RH) >10 10
Ω
Capacitance:
Center-Center:
Center-Shield:
Rise Time:
Signal Delay:
<0.006pF
<60pF
<300psec
<3nsec
AC Performance
Insertion Loss
≤(40°C, 95% RH)
10MHz
100MHz
500 MHz
1.3GHz
≤(25°C, 40% RH)
10MHz
<0.3dB
<0.7dB
<1.5dB
<3.0dB
100MHz
500 MHz
1.3GHz
<0.2dB
<0.5dB
<1.1dB
<1.9dB
Crosstalk
Channel-Channel, Channel-Common
10MHz <-90dB
100MHz
500 MHz
<-80dB
<-65dB
1.3GHz
<-55dB
Group-Group, Module-Module
10MHz
100MHz
500 MHz
1.3GHz
VSWR
10MHz
100MHz
500 MHz
1.3GHz
<-90dB
<-80dB
<-70dB
<-60dB
<1.20
<1.25
<1.35
<1.55
19
Learn more at www.agilent.com/find/3499
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
19
MODULES
Agilent 44470A, 44470D, 44471A, 44471D,
44472A, 44473A, 44474A, 44475A, 44477A Modules
44470A 10-channel Multiplexer Module
(2 A, 250 V)
44470D 20-channel Multiplexer Module
(2 A, 250 V)
44471A 10-channel General-purpose
Module (2 A, 250 V)
44471D 20-channel General-purpose
Module (1 A, 250 V)
The 44470A, 44470D, 44471A, and
44471D are designed for low-channel count applications, with higher switching capability (current or voltage) than N2260A or N2261A modules.
44472A Dual 1x4 RF Multiplexer Module
(300 MHz, 50
Ω)
The 44472A RF multiplexer module offers broadband switching capability for high-frequency and pulse signals.
Two independent 50
Ω characteristic impedance 1x4 switches are provided for signal from DC to 300 MHz. BNC connectors on the module allow for easy connection.
44473A 4 x 4 Matrix Module (2 A, 250 V)
44474A 16-Bit Digital I/O Module
(TTL compatible)
MODULES
44475A Breadboard Module
The 44475A breadboard provides a means to customize, with two areas
(104mm x 74mm and 79mm x 74mm) for customer-designed circuitry.
44477A 7-channel Form-C Relay Module
(2 A, 250 V)
The 44477A is a 7-channel Form-C relay module for general-purpose switching and control of external devices.
All of the above modules, designed for 3488A mainframes, work in the
3499A/B/C.
Rack Mounting Kits
3499A 3499B
Agilent 3499A Rack Mount Kit with Handles (Opt. 1CP)
To rackmount an Agilent 3499B with a fill panel, order Option 1CM.
3499C
To rackmount the 3499C without handles, order the Agilent standard cabinet accessory 5063-9216.
To rackmount the 3499C with handles, order the Agilent standard cabinet accessory 5063-9223.
Agilent 3499A Rack Mount Kit (Opt. 1CM)
20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
20
Ordering Information
Agilent Technologies Products
Mainframes
3499A 5-Slot Switch/Control Mainframe, includes hard copy manual and power cord. Plug-in modules are ordered separately and are required for operation.
3499A-0B0 Delete Hard Copy User's Manual
3499A-1CP Rack Mount Kit with Handles
3499A-1CM Rack Mount Kit
3499A-0B1 Add additional User's Manual
3499B 2-Slot Switch/Control Mainframe, includes hard copy manual and power cord. Plug-in modules are ordered separately and are required for operation.
3499B-0B0 Delete Hard Copy User's Manual
3499B-1CM Rack Mount Kit with half-rack filler panel
3499B-0B1 Add additional User's Manual
3499C 9/14-Slot Switch/Control Mainframe.
User's manual is not included. Must order
3499C-0B1 for hardcopy of the User's Manual.
Plug-in modules are ordered separately and are required for operation.
3499C-0B1 Hardcopy of User's Manual
For rackmount kit w/o handles, order the Agilent standard cabinet accessory 5063-9216
For rackmount kit with handles, order the Agilent standard cabinet accessory 5063-9223.
Mainframe Filler Panels
3499C-FP1 1-slot width filler panel for
3499A/B/C mainframes
3499C-FP2 2-slot width filler panel for
3499A/B/C mainframes
Plug-in modules, screw terminal blocks
NOT included
N2260A 40-channel Multiplexer Module
N2261A 40-channel General Purpose Relay Module
N2262A 4 x 8 Matrix Module
N2263A 32-bit Digital I/O Module
N2264A 12 + 3 GP + 16-bit Digital I/O Module
N2265A 4 x 4 Matrix + 16-bit Digital I/O Module
N2266A 40-channel High-speed Multiplexer Module
N2267A 8-channel 8 A General Purpose
Relay Module
N2268A Dual 1 x 4 RF (3.5 GHz) Multiplexer Module
N2270A 10-channel 1000 V Multiplexer Module
N2272A 1 x 9 RF (1GHz) Multiplexer Module
N2276A Dual 1 x 6 Microwave Multiplexer Module
N2276A-204 Dual 1 x 4 Multiplexer
N2276A-206 Dual 1 x 6 Multiplexer
N2276B Microwave Multiplexer Driver Module
N2280A Quad Optical 1 x 2 Multiplexer Module,
SC/APC
N2281A Dual Optical 1 x 4 Multiplexer Module,
SC/APC
N2282A 1 x 8 Optical Multiplexer Module, SC/APC
N2289A Mini-DIN-to-D9 cable for built-in DIO in 3499A/B
N2290A Screw terminal block for N2260A and N2266A
N2291A Screw terminal block for N2261A
N2292A Screw terminal block for N2262A
N2293A Screw terminal block for N2263A
N2294A Screw terminal block for N2264A
N2295A Screw terminal block for N2265A
N2297A DIN96-to-Twin-D50 cable for N2260-5A
N2298A DIN96-to-D25 cable for N2262A
N2299A DIN96-to-Quad-D25 cable for N2260-5A
N2320A Crimp & Insert Connection kit for N2270A
N2327A Crimp & Insert Connection kit for N2267A
Plug-in modules (Agilent 3488A family), screw terminal blocks included
44470A 10-channel Relay Multiplexer Module
44470D 20-channel Relay Multiplexer Module
44471A 10-channel GP Relay Module
44471D 20-channel GP Relay Module
44472A Dual 1 x 4 RF (300MHz) Multiplexer
Module (50
Ω)
44473A 4x4 Matrix Switch Module
44474A 16-bit Digital I/O Module
44475A Breadboard Module
44476A Microwave Multiplexer Module
44476B Microwave Switch Driver Module
44477A 7-channel Form-C Relay Module
44478A Dual 1x4 RF (1.3 GHz) Multiplexer (50
Ω)
44478B Dual 1x4 RF (1.3 GHz) Multiplexer (75
Ω)
44480A Connector Kit for 44470A
44480B Connector Kit for 44470D
21
Learn more at www.agilent.com/find/3499
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
21
www.agilent.com
Agilent Technologies' Test and Measurement Support, Services, and Assistance
Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems.
We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. Support is available for at least five years beyond the production life of the product.
Two concepts underlie Agilent's overall support policy: "Our Promise" and "Your Advantage."
Our Promise
Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you use Agilent equipment, we can verify that it works properly, help with product operation, and provide basic measurement assistance for the use of specified capabilities, at no extra cost upon request. Many self-help tools are available.
Your Advantage
Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and on-site education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products.
Agilent Email Updates www.agilent.com/find/emailupdates
Get the latest information on the products and applications you select.
For more information on Agilent
Technologies’ products, applications or services, please contact your local
Agilent office. The complete list is available at: www.agilent.com/find/contactus
Phone or Fax
United States:
(tel) 800 829 4444
(fax) 800 829 4433
Canada:
(tel) 877 894 4414
(fax) 905 282 6495
China:
(tel) 800 810 0189
(fax) 800 820 2816
Europe:
(tel) 31 20 547 2111
Japan:
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
Korea:
(tel) (080) 769 0800
(fax) (080)769 0900
Latin America:
(tel) (305) 269 7500
Taiwan:
(tel) 0800 047 866
(fax) 0800 286 331
Other Asia Pacific Countries:
(tel) (65) 6375 8100
(fax) (65) 6755 0042
Email: [email protected]
Product specifications and descriptions in this document subject to change without notice.
© Agilent Technologies, Inc. 2004
Printed in the USA, July 30, 2004
5988-6103EN
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM
REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at
www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at
www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us:
(888) 88-SOURCE | [email protected] | www.artisantg.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project