VR1000

VR1000
VR1000
PRODUCT SPECIFICATION
AM VIDEO RECEIVER
FEATURES
• AM Video
• NTSC, PAL, SECAM Compatible
V
• Full Color Compatibility
• Utilizes Manual Gain
• Plug and Play Design for Ease of Installation
• Power Status Indicating LED to Monitor System Performance
DESCRIPTION
The IFS VR1000 video receiver detects an AM video signal on one
multimode optical fiber. The VR1000 utilizes manual gain control.
The receiver is compatible with the IFS VT1101M, VT1000AC, and
VT1001 series transmitters. Plug-and-play design ensures ease of
installation. The receiver incorporates a power status indicating LED
for monitoring proper system operation. The module is available in a
stand-alone version only.
• Automatic Resettable Fuses on all Power Lines
• Lifetime Warranty
Available at:
www.
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
APPLICATION EXAMPLES
• CCTV (Fixed Video)
ORDERING INFORMATION
PART
NUMBER
DESCRIPTION
FIBERS
REQUIRED
1
MULTIMODE VR1000
62.5/125µm**
OPTIONS
.com
Video Receiver (850 nm)
VR1000 is compatible with:
VT1101M, VT1000AC & VT1001 Series Transmitters
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected]
Europe, Middle East, Africa TEL +44(0) 1732 522 777 ■ Asia Pacific TEL +65 6235 2661
Australia TEL +61 2 9836 0600 ■ Latin America TEL (512) 477-8787
VR1000
TECHNICAL SPECIFICATION
AM VIDEO RECEIVER
SPECIFICATIONS
ELECTRICAL & MECHANICAL
VIDEO
Power:
Current Protection:
10 - 12 VDC @ 150 mA
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
Video Output:
Bandwidth:
1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
Circuit Board:
Differential Gain:
Differential Phase:
<5%
<5°
Size (in./cm.) (LxWxH)
Surface Mount:
4.2 x 3.5 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Tilt:
Signal-to-Noise Ratio (SNR):
<1%
60 dB typical, 54 dB minimum
Shipping Weight:
< 2 lbs./0.9 kg
WAVELENGTH
850 nm, Multimode
MTBF:
Operating Temp:
> 100,000 hours
-40° C to +74° C
NUMBER OF FIBERS
1
Storage Temp:
Relative Humidity:
-40° C to +85° C
0% to 95% (non-condensing)†
ST
Terminal Block with Screw Clamps
BNC (Gold Plated Center-Pin)
†May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
ENVIRONMENTAL
CONNECTORS
Optical:
Power:
Video:
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
OPTICAL POWER BUDGET
FIBER
Multimode
62.5/125µm**
WAVELENGTH
850 nm
TRANSMITTER
MODEL
OUTPUT
VT1000AC
VT1001
VT1101M
VT1002AC
VT1003
VT1102M
RECEIVER
MODEL SENSITIVITY
25µw
(-16 dBm)
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
14 dB
2.5 miles (4 km)
20 dB
3.5 miles (5.5 km)
1 µw
(-30 dBm)
VR1000
100 µw
(-10 dBm)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
up to 2.5 miles
(4 km)
VR1000
VT1101M
(Coax)
ifs
Video
ifs
203.426.1180
1 Fiber
62.5/125µm MM
International
Fiber
Video
Systems
Incorporated
(Coax)
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
06/16/03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement