documents/pdfs/AFR/RCC for rev 09

documents/pdfs/AFR/RCC for rev 09
09
RC Fiber Collimator
(RCC Series )
The RC Fiber Collimator is the basic element for in-line RC fiber optics components,
such as RC isolator and RCFWDM. It has high extinction ratio, low insertion and high return loss. The
unique processing and high quality AR coating also enable this collimator to
handle high power.
Specifications
Parameters
Center Wavelength
Operating Wavelength Range
Working Distance
Typ. Insertion [email protected]
Max. Insertion [email protected]
Max. PDL
Min. Return Loss
Tensile Load
Fiber Type
Operating Temperature
Storage Temperature
Unit
nm
nm
mm
dB
dB
dB
dB
N
Single Fiber
0.05
55
5
RC 1550 Fiber or Specify
-5 to +70
-40 to +85
℃
℃
Package Dimensions
Ordering Information
RCC-①-②-③③-④-⑤-⑥-⑦-⑧
①: Lens Diameter
1 - 1.8mm
S - Specify
⑥: Connector Type
N - None
②: Pigtail Type
1 - Single fiber pigtail
2 - Dual fiber pigtail
S - Specify
⑦: Fiber Type
B - 170um bare fiber
L - 900um loose tube
S - Specify
③: Wavelength
1 - 1550nm
S - Specify
⑧: Fiber Length
C - 1.5 m
S - Specify
⑤: Working Distance
1 - 5 mm
S - Specify
0.6
0.75
0.55
0.70
*Above specifications are for device without connector.
④: Package Dimensions
1 - Metal holder
2 - Glass tube
Dual Fiber
1550
±20
5 or Specify
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement