Холодильники Dometic

Холодильники Dometic
Specification Sheets for:
Refrigerators & Freezers
Do-It-Yourself Cooling Kits
Custom Refrigeration
Eskimo Ice Systems
L-0004
LB-04
Rev. 20101210
Specification Sheets for:
Refrigerators & Freezers
Do-It-Yourself Cooling Kits
Custom Refrigeration
Eskimo Ice Systems
Lit. ID#
Revision Date
Description
Page
REFRIGERATORS/FREEZERS
2604
12/10/10
CR Series Front-Loading Refrigerators/Freezers
3
2603
05/13/08
RS Series Front-Loading Refrigerators/Freezers
5
2605
05/13/08
RPF-50SS Front-Loading Freezer
7
2607
08/06/10
CF Series Portable Refrigerators/Freezers
9
2691
06/30/09
CB Series Top-Loading Refrigerators/Freezers
11
2690
12/10/10
CD-030 Drawer Refrigerator
13
DO-IT-YOURSELF COOLING KITS
2693
10/22/10
Adler/Barbour ColdMachine Series
15
2692
06/30/09
CoolMatic Series
17
2694
06/30/09
Adler/Barbour CS-NC-15 Kit
19
CUSTOM REFRIGERATION
0831
05/28/10
KRA Cabinet Condensing Units
21
2146
10/23/09
Grunert Passagemaker Series
23
0974
05/18/06
Custom Evaporators
25
2148
05/30/06
Dry Evaporator Plates
27
2147
05/30/06
Grunert Holdover Plates
29
2450
08/28/09
Eskimo Ice Fishbox Ice Systems
31
2617
08/21/09
Ice Cube Fishbox Ice System
33
ESKIMO ICE SYSTEMS
Refrigerators/Freezers
3
CR Series Refrigerators/Freezers
For Your Galley or Cockpit
CR-1080E-S shown
without flange
Luxury meets performance and top-of-the-line technology with
Dometic’s CR Series of premium refrigerators with freezer
Key Benefits
compartments. CR refrigerator/freezers are constructed for the rigors of
■12/24
marine use, but designed to compliment any galley or cockpit.
■Exclusive
Each CR Series appliance is equipped with a premium Danfoss DC compressor,
■Cool-blue
providing excellent cooling performance, ultra-quiet operation, and minimal
■Diagnostic
power consumption whether operating on DC or AC power. During rough sea
conditions, the door remains securely closed—at top and bottom—as a result of
the patented double-lock mechanism. The CR’s vent mechanism holds the door
open slightly for easy defrosting and mildew prevention. The door can be set to
open to the left or right to accommodate any
galley configuration.
volts DC; 110/220 volts AC.
protected evaporator eliminates the
risk of ice-pick damage.
circuitry installed with green and red
LED indicator lights.
■Face
panel is interchangeable—even while
installed in the boat.
■Four
sizes and many colors to choose from.
■Recessed
“Beyond pleasing aesthetics, the
CR Series compressor refrigerators
offer several clever design touches,
including a lock to allow the cabinet
to ventilate when not in use and a
very positive latching mechanism.”
— As commented by the awards jury at METS Amsterdam, the
world’s leading trade show for marine equipment
ISO 9001:2008
L–2604
Rev. 20101210
handle provides a smooth, sleek
surface.
■Full-width
■Features
Award Winning Design
interior light.
freezer compartment.
include egg tray, bottle holder, extralarge vegetable bin, and adjustable shelves
and racks.
4
Refrigerators/Freezers
Specification Details for CR Series Refrigerators/Freezers
Model
Freezer Gross Capacity
Refrigerator Gross Capacity
Voltage
Avg. Power Consumption
Insulation
CR-1050
CR-1065
CR-1080
CR-1110
4.8 quarts (4.5 liters)
4.8 quarts (4.5 liters)
4.8 quarts (4.5 liters)
8.9 quarts (8.4 liters)
1.7 cu ft (48.1 liters)
2.3 cu ft (65.1 liters)
2.8 cu ft (79.1 liters)
3.8 cu ft (107 liters)
12/24V DC (110/220V AC)
12/24V DC (110/220V AC)
12/24V DC (110/220V AC)
12/24V DC (110/220V AC)
40 watts (3.3 amps)
40 watts (3.3 amps)
40 watts (3.3 amps)
45 watts (3.75 amps)
CFC-free polyurethane
CFC-free polyurethane
CFC-free polyurethane
CFC-free polyurethane
Danfoss BD35F
Danfoss BD35F
Danfoss BD35F
Danfoss BD35F
Compressor
Refrigerant
Environmentally safe R-134A
Environmentally safe R-134A
Environmentally safe R-134A
Environmentally safe R-134A
Material
Stainless-steel fittings, plastic
interior, door frame in plastic body
with coated-metal frame
Stainless-steel fittings, plastic
interior, door frame in plastic body
with coated-metal frame
Stainless-steel fittings, plastic
interior, door frame in plastic body
with coated-metal frame
Stainless-steel fittings, plastic
interior, door frame in plastic body
with coated-metal frame
Color Options
CR-1050U/F: black face panel,
black door surround, black flushmount flange
CR-1065U/F: black face panel,
black door surround, black flushmount flange
CR-1080U/F: black face panel,
black door surround, black flushmount flange
CR-1110U/F: black face panel,
black door surround, black flushmount flange
CR-1050E/F-W: white face panel,
silver door surround, silver flushmount flange
CR-1065E/F-W: white face panel,
silver door surround, silver flushmount flange
CR-1080E/F-S: stainless-steel
face panel, silver door surround,
silver flush-mount flange
CR-1110E/F-S: stainless-steel face
panel, silver door surround, silver
flush-mount flange
CR-1050E/F-S: stainless-steel
face panel, silver door surround,
silver flush-mount flange
CR-1065E/F-S: stainless-steel
face panel, silver door surround,
silver flush-mount flange
*Cut-Out Dimensions
with flush-mount flange
16.1" W x 21.3" H x 19.6" D
(408mm x 542mm x 497mm)
18.8" W x 21.1" H x 21.3" D
(478mm x 537mm x 542mm)
19.9" W x 25.6" H x 20.9" D
(505mm x 649mm x 530mm)
21.6" W x 29.8" H x 22.1" D
(548mm x 756mm x 560mm)
*Cut-Out Dimensions
with space-saver flange
15.1" W x 21.0" H x 17.7" D
(383mm x 532mm x 450mm)
17.9" W x 21.1" H x 19.4" D
(454mm x 535mm x 494mm)
18.9" W x 25.5" H x 19.0" D
(481mm x 648mm x 481mm)
20.6" W x 29.7" H x 20.1" D
(523mm x 755mm x 511mm)
Net Weight
42 lbs (19 kg)
46 lbs (20 kg)
52 lbs (23 kg)
62 lbs (28 kg)
Flange Options
EST-0050U: black space-saver
EST-0050E: silver space-saver
EST-0065U: black space-saver
EST-0065E: silver space-saver
EST-0080U: black space-saver
EST-0080E: silver space-saver
EST-0110U: black space-saver
EST-0110E: silver space-saver
Replacement
Flange Options
EFM-0050U: black flush-mt
EFM-0050E: silver flush-mt
EFM-0065U: black flush-mt
EFM-0065E: silver flush-mt
EFM-0080U: black flush-mt
EFM-0080E: silver flush-mt
EFM-0110U: black flush-mt
EFM-0110E: silver flush-mt
■Premium
cooling
technology in an
elegant design.
■Patented
double-lock door
mechanism (indicated by
white arrows).
■ Full-length
recessed door
handle provides comfortable
opening and closing.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2604 Rev. 20101210
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
■Freezer
door.
compartment with
Refrigerators/Freezers
Built-In Refrigerator & Freezer
With Stainless-Steel Interior
■
Savor the tastes of home.
RSD-115 shown without
mounting frame.
Whether your journeys require reliable refrigeration or
deep-freezing capability, the RSD-115 refrigerator and
the RSF-115 freezer meet those needs. Each can be used
as a stand-alone installation, or paired to create a cool side-by-side
combination.
These attractive built-in units are ideally designed for the rigors
of mobile use. A steel frame fitted on all edges keeps the overall
body firmly in place. Additional stability is provided by a sturdy steel
sheet behind the insulation instead of the typical cardboard fill. The
3.94 cubic-foot refrigerator and the 3.9 cubic-foot freezer are each
equipped with a powerful Danfoss compressor.
During rough sea conditions, the door remains securely closed—
at top and bottom—as a result of the patented double-lock door
mechanism. When not in use, choose the mechanism’s vent position,
which holds the door open slightly for easy defrosting and mildew
prevention. The attractive, unobtrusive, full-width handle provides
comfortable opening and closing. Enjoy optimal ease of movement
with a door you can set to open left or right to accommodate any
galley configuration.
ISO 9001:2008
L–2603
Rev. 20080513
Key Benefits
■12/24
volts DC.
■Optional
factory-installed adapter for AC
operation.
■Danfoss
BD35F compressor
provides extremely quiet operation.
■Brushed
stainless-steel finish.
■Reversible
■Interior
■Choice
door opening.
light.
of standard mount
or flush mount flange.
5
6
Refrigerators/Freezers
Specification Details for RSD-115 & RSF-115
Model
Gross Capacity
RSD-0115E Refrigerator
RSF-0115E Freezer
3.94 cubic feet
3.9 cubic feet
12/24V DC
12/24V DC
45 watts / 3.3 amps
50 watts / 4.1 amps
Voltage
Average Power Consumption
Insulation
CFC-free polyurethane
CFC-free polyurethane
Compressor
Danfoss BD35F
Danfoss BD35F
Refrigerant
Environmentally-safe R134A
Environmentally-safe R134A
Stainless-steel fittings,
stainless-steel interior,
door frame in plastic body
with coated metal frame
Stainless-steel fittings,
stainless-steel interior,
door frame in plastic body
with coated metal frame
Stainless-steel face panel,
black door surround, black flange
Stainless-steel face panel,
black door surround, black flange
20.5”W x 29.12”H x 22”D
520mm x 739mm x 558mm
20.5”W x 29.12”H x 22”D
520mm x 739mm x 558mm
63 lbs / 28.5 kg
63 lbs / 28.5 kg
Yes
Yes
Yes, left or right
Yes, left or right
MPS-35
MPS-35
EST-0400
EFM-0400
EST-0400
EFM-0400
Material
Color
Cut-Out Dimensions
Net Weight
Interior Light
Reversible Door Opening
AC Adapter Option
Flange Options:
Standard Mount, Black
Flush Mount, Black
■Compressor
■Condensation
Dimensions for RSD-115 & RSF-115
20.5"
22"
29.12"
7"
6"
■A
powerful side-by-side combo:
RSF-115 and RSD-115.
.9"
1"
Front
18.8"
1.8"
Side
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2603 Rev. 20080513
can be mounted up to five
feet away.
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
drain.
Refrigerators/Freezers
Full-Size Built-In Freezer
With Easy-to-Clean Plastic Interior
■Frozen
treats, anytime.
RPF-50SS shown
without mounting frame.
Equipped with a powerful Danfoss compressor, the RPF50SS offers 1.6 cubic feet of deep-freezing space. Frozen
food is practical and convenient, both at home and on-the-move.
But if the freezer compartment in your onboard fridge is too small to
accommodate all you want to take on your journey, check out this
full-size freezer offered by Dometic. The RPF-50SS can be used as a
Key Benefits
■12/24
volts DC.
■Optional
factory-installed adapter for AC
operation.
■Danfoss
BD35F compressor provides
extremely quiet operation.
stand-alone freezer or paired with the same size refrigerator to create
■Brushed
a cool side-by-side combination.
■
stainless-steel finish.
Condensation drain.
■Reversible
During rough sea conditions, the door remains securely closed—
at top and bottom—as a result of the patented double-lock door
mechanism. When not in use, choose the mechanism’s vent position,
which holds the door open slightly for easy defrosting and mildew
prevention. The attractive, unobtrusive, full width handle provides
comfortable use. Enjoy optimal ease of movement with a door you
can set to open left or right to accommodate any galley configuration.
ISO 9001:2008
L–2605
Rev. 20080513
door opening.
■Interior
light.
■Choice
of standard mount or flush mount
flange.
7
Refrigerators/Freezers
Specification Details for RPF-50SS
Model
RPF-0050SS
Gross Capacity
1.6 cubic feet
Voltage
12/24V DC
Average Power Consumption
40 watts / 3.3 amps
Insulation
CFC-free polyurethane
Compressor
Danfoss BD35F
Refrigerant
Environmentally-safe R134A
Material
Stainless-steel fittings,
plastic interior,
door frame in plastic body
with coated metal frame
Color
Stainless-steel finish face panel,
black door surround, black flange
Cut-Out Dimensions
■Condensation
drain.
17.5" W x 20.5" H x 21.12" D
444mm x 520mm x 536mm
Net Weight
55 lbs / 25 kg
Interior Light
Yes
Reversible Door Opening
Yes, left or right
AC Adapter Option
MPS-35
Flange Options:
Standard Mount, Black
Flush Mount, Black
EST-0200
EFM-0200
RPF-50SS Dimensions
■Easy
21.12"
17.5"
20.5"
8
.9"
.9"
Front
18"
1.8"
Side
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2605 Rev. 20080513
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
to clean plastic interior.
Refrigerators/Freezers
CF Series Portable Refrigerators/Freezers
Refrigerate or Freeze to 0°F
Charter Fishing Boat Success Story:
"Our savings have been substantial. No more wasted
bait since we only thaw out what we need. Thanks!"
— Capt. Roger Wright
Charter Boat Rendevous, Port Canaveral, FL
CF-25
CF-18
CF-35
CF-40
CF-50
CF-80
CF Series refrigerators/freezers offer powerful cooling
Key Benefits
and deep-freezing from 50° to 0°F and state-of-the-art
■AC/DC
electronics for additional convenience. There’s an ideal appliance for
■
every requirement – from the slim 19-quart model to the extra-large
■
function which runs the compressor at maximum performance until
or DC-only models.
Seven sizes to choose from.
■Can
capacity 113-quart model. The CF Series features a quick-chill/turbo
operate as a refrigerator or freezer.
Lightweight and easily portable.
■Battery
monitor with low-voltage shut-off
protects against a dead battery.
the desired temperature is reached. All models work perfectly even in
inclined positions.
■Memory
feature maintains presets if the
system is turned off.
Special electronics include a
digital temperature display in
Fahrenheit or Celsius. Eight
models (CF-25 to CF-110)
are equipped with a unique soft-touch operating panel.
Insulating and Protective Covers with Velcro® closures and zip
panels are available for all CF Series Refrigerators/Freezers.
Constructed of high-quality Oxford nylon, the covers feature
aluminum-coated polyester insulation and a non-skid bottom. The
operating panel and connection sockets remain accessible through
openings in the cover. Convenient side pockets store small items.
ISO 9001:2008
L–2607
Rev. 20100806
CF-110
■Optional
insulated
protective cover available
for all CF Series models.
9
27.5/12.5
• Insulating/protective
cover (IC-CF-35)
• Special electronics
• Removable carrying
handles
• Removable coatedwire grid
• Interior light
Removable
33.0/15.0
22.8 x 15.1 x 14.0
579 x 383 x 355
L–2607 Rev. 20100806
Environmentally
Responsible
Specifications and availability subject to change without notice.
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
CF-50 fits in most
marine slide drawers.
■The
• AC adapter
• Insulating/protective
cover (IC-CF-25)
• AC adapter
• Insulating/protective
cover (IC-CF-18)
Accessories
Removable
• Special electronics
• Removable coatedwire basket
Hinged
Net Weight (lbs/kg)
Lid
• Repositional grid
• Carrying handle
25.0/11.5
L x H x W (in/mm)
21.7 x 16.7 x 10.2
551 x 424 x 259
Standard Features
18.0 x 16.0 x 12.0
457 x 406 x 304
Color
Lid Material
• Insulating/protective
cover (IC-CF-40)
• Special electronics
• Removable carrying
handles
• Removable coatedwire basket
• Interior light
Removable
35.0/16.0
22.8 x 17.5 x 14.0
579 x 444 x 355
• AC adapter
• Insulating/protective
cover (IC-CF-50)
• Special electronics
• Removable carrying
handles
• Removable coatedwire basket
• Interior light
Removable
40.0/18.0
24.8 x 19.4 x 14.0
629 x 492 x 355
Pale gray/dark gray
Weather-resistant polyethylene
R-134A
Cabinet Material
High-impact polypropylene
45 watts, 3.75 amps
Refrigerant
45 watts, 3.75 amps
Danfoss BD35F
45 watts, 3.75 amps
12/24V DC
68
52/1.70
CF-050DC
CFC-free polyurethane foam
35 watts, 2.9 amps
12/24V DC
48
12/24V DC,
100-240V AC
41
39/1.30
CF-040AC
12/24V DC,
100-240V AC
33/1.10
CF-035AC
Compressor
35 watts, 2.9 amps
12/24V DC
27
24/0.90
CF-025DC
Insulation
Avg. Power Consumption
Voltage
23
19/0.70
Gross Capacity
(qt./cu. ft.)
12 oz. Can Capacity
CF-018DC
Model
Removable
40.0/18.0
24.8 x 19.4 x 14.0
629 x 492 x 355
45 watts, 3.75 amps
12/24V DC,
100-240V AC
68
52/1.70
CF-050AC
Dealer:
• Insulating/protective
cover (IC-CF-50)
• Special electronics
• Removable carrying
handles
• Removable coatedwire basket
• Interior light
Specification Details for the CF Series Portable Refrigerators/Freezers
• Insulating/protective
cover (IC-CF-80)
• Special electronics
• Removable carrying
handles
• Removable coatedwire basket
• Interior light
Hinged
68.0/31.0
31 x 18.1 x 19.6
787 x 459 x 497
Coated sheet steel
65 watts, 4.5 amps
12/24V DC,
100-240V AC
103
85/2.80
CF-080AC
• Insulating/protective
cover (IC-CF-110)
• Special electronics
• Removable carrying
handles
• 2 removable coatedwire baskets
• Interior light
Hinged
73.0/33.0
31.0 x 22.0 x 19.6
787 x 558 x 497
Coated sheet steel
65 watts, 4.5 amps
12/24V DC,
100-240V AC
144
113/3.77
CF-110AC
10 Refrigerators/Freezers
Refrigerators/Freezers
11
CB Series Refrigerators/Freezers
Top-Loading, Space-Saving Built-Ins
CB-040 1.4 cu. ft. unit
CB-036 1.3 cu. ft. unit
The top-loading CB Series can operate as built-in refrigerators or
freezers depending on the temperature you set. Available in 1.3 cu. ft.
(36 liters), 1.4 cu. ft. (39 liters), and 3.5 cu. ft. (100 liters) capacities, these units
have energy-efficient Danfoss compressors that run on 12/24V DC power or
110/220V AC power (optional).
Key Benefits
■Permanent
installation in cupboard space.
■Lid
can accommodate laminate to match
countertops.
■
Ideal for use as a bait freezer or refrigerator.
A CB unit permanently installs in a cupboard space and continues working
■Stainless-steel
even in inclined positions. Its lift-off lid has superior seal and insulation and can
■Impeccable
accommodate a laminate to match your countertops.
■Lift-off
interior housing.
operation in inclined positions.
lid with superior seal and insulation.
■Top
loading for improved efficiency and better
performance.
■CFC-free
polyurethane insulation.
■Variable
thermostat allows operation at a wide
range of temperatures from refrigeration to
freezing.
■Environmentally
CB Series refrigerators/freezers
feature a convenient space-saving
design and an easy-open lid.
ISO 9001:2008
L–2691
Rev. 20090630
safe R-134a refrigerant.
12 Refrigerators/Freezers
Specification Details for CB Series Top-Loading Refrigerators/Freezers
Model
Gross Capacity
Voltage
Avg. Power Consumption
Insulation
CB-036
CB-040
CB-110
1.3 cu. ft. (36 liters)
1.4 cu. ft. (39 liters)
3.5 cu. ft. (100 liters)
12/24V DC
10/220V AC Optional
12/24V DC
10/220V AC Optional
12/24V DC
10/220V AC Optional
45 watts/3.75 amps
45 watts/3.75 amps
60 watts/3.75 amps
1.6 in. (40mm) solid polyurethane
foam
1.6 in. (40mm) solid polyurethane
foam
2.0 in. (50mm) solid polyurethane
foam
Compressor
Danfoss BD35F
Danfoss BD35F
Danfoss BD35F
Refrigerant
Environmentally safe R-134A
Environmentally safe R-134A
Environmentally safe R-134A
Material
Zinc-coated sheet steel with
stainless-steel interior; shock
resistant plastic base.
Zinc-coated sheet steel with
stainless-steel interior; shock
resistant plastic base.
Zinc-coated sheet steel with
stainless-steel interior; shock
resistant plastic base.
Color
Gray body with dark gray lid.
Gray body with dark gray lid.
Gray body with dark gray lid.
16.0" x 16.0" x 23.0"
(406mm x 406mm x 584mm (1))
13.3" x 26.0" x 19.7"
(337mm x 660mm x 500mm)
19.1" x 25.6" x 31.7"
(485mm x 650mm x 805mm)
41 lbs./18.59 kg.
44 lbs./19.95 kg.
62 lbs./27.9 kg.
Cut-Out Dimensions (WxHxD)
Net Weight
(1)
Notes:
(1)
Depth is 16.0" (406mm) if the compressor is mounted remotely.
CB-110 3.5 cu. ft. unit shown
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2691 Rev. 20090630
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Refrigerators/Freezers
13
CD-030 Drawer Refrigerator
Smart Cooling for Confined Spaces
CD-030 drawer
refrigerator shown
This compact refrigerator turns any unused nook into a practical
31 quart (29 liter) cooler. The CD-030 permanently installs in any cupboard
space. A convenient variable thermostat protects your contents from freezing,
and the Danfoss compressor is extremely energy efficient.
For installation flexibility, the compressor can be mounted on the unit’s rear, left
or right side, or up to 5 ft. (1.5 m) away. The CD-030 drawer refrigerator provides
a very energy efficient, flexible solution for boats with limited space.
Key Benefits
■Permanent
installation in cupboard space
or under a settee.
■Easy
pull drawer on ball-bearing slides.
■Continually
variable thermostat prevents
contents from freezing.
■Compressor
can be mounted on the unit’s
rear, left or right side, or up to 5 ft. (1.5 m)
away.
■
Extremely energy efficient.
■Available
The CD-030 converts empty niches
in the galley or under a settee into a
30-liter capacity refrigerator.
ISO 9001:2008
L–2690
Rev. 20101210
in black or white.
14 Refrigerators/Freezers
Specification Details for CD-030 Drawer Refrigerator
Model
Gross Capacity
Voltage
Average Power Consumption
Insulation
CD-030DC
31 quarts/29 liters
12/24V DC
10/220V AC Optional
40 watts/3.3 amps
CFC-free polyurethane
Compressor
Danfoss BD35F
Refrigerant
Environmentally safe R-134A
Material
Color Options
Cut-Out Dimensions (WxHxD)
Net Weight
Sturdy metal housing with
injection-molded parts
CD-030DC-D65A: Black drawer
CD-030DCW-D65A: White drawer
17.0" x 9.8" x 28.7"(1)
(431mm x 248mm x 728mm (1))
44 lbs./19.95 kg.
Notes:
(1)
Depth is 20.0" (508mm) if the compressor is mounted remotely.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2690 Rev. 20101210
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
C Ne
on w
ne Q
c t uic
H kos
es
Do-It-Yourself Cooling Kits
15
Adler/Barbour ColdMachine Kits
Customized Do-It-Yourself Refrigeration
CU-100 ColdMachine &
VD-150 Evaporating Unit
(shown with ice trays)
Performance, efficiency, and quality are hallmarks of Adler/Barbour
ColdMachine Kits by Dometic. Two configurations are offered: The air-cooled
CU-100 ColdMachine, and the air- and water-cooled CU-200 SuperColdMachine.
Powered by a Danfoss BD50F compressor, these easy-to-install units provide
Key Benefits
■Now
with self-sealing quick-connect fittings.
■Oversized
air condensers.
up to 15 cu. ft. (424 liters) of refrigeration and work with a variety of 100-Series
■Up
to 15 cu. ft. (424 liters) of refrigeration.
evaporators (see reverse side).
■Danfoss
ColdMachines are specifically designed to survive the rigors of the harsh marine
■Stainless-steel
environment, and to provide exceptional performance in hot and humid conditions,
■Shrouded
erratic or low voltage, and continuous use.
■Modular
ColdMachine kits now come with self-sealing quick-connect fittings for easy
■Quick-connect
BD50F compressor provides 25%
more cooling performance.
phone-jack connection for
thermostat.
attachment. Unlike the old “one-shot” connections, quick-connect fittings can be
adapters keep older “oneshot” units in service.
disconnected and reconnected whenever necessary without loss of refrigerant or
■Optimal
exposing the system to air or moisture.
■High-CFM
■Built-in
Dometic also offers quick-connect adapters (shown below), which join “one-shot”
units to their quick-connect counterparts (professional installation required).
performance in warmer waters.
fan.
troubleshooting diagnostics.
■Environmentally
ISO 9001:2008
L–2693
Rev. 20101022
“One-shot” to Quick-Connect Adapters
ColdMachine or
Evaporator With
Quick-Connect
Fittings
safe R-134a refrigerant.
■Can
be installed up to 15 ft. (4.57 m) from
evaporator.
■Precharged
ColdMachine or
Evaporator With
“One-Shot”
Connections
construction.
forced-air condensers.
and ready to install.
16 Refrigerators/Freezers
Technical Specifications for Adler/Barbour ColdMachine Cooling Units
Model
CU-100 ColdMachine
CU-200 SuperColdMachine
Capacity
15.0 cu. ft. (424 liters)
15.0 cu. ft. (424 liters)
Voltage
12V DC
12V DC
Application
General Boating
Tropical-Water Boating
Dimensions
(WxHxD)
10.0 in. x 7.5 in. x 11.1 in.
(254mm x 190mm x 281mm)
10.0 in. x 7.5 in. x 11.1 in.
(254mm x 190mm x 281mm)
Net Weight
18 lbs./8.2 kg.
18 lbs./8.2 kg.
Adler/Barbour
CU-200 ColdMachine
Technical Specifications for Adler/Barbour 100 Series Evaporating Units
Model
Capacity
Application
Configuration
Dimensions (WxHxD)
Net Weight
VD-150
VD-151
VD-152
9.0 cu. ft. (254 liters)
9.0 cu. ft. (254 liters)
15.0 cu. ft. (424 liters)
Medium-sized refrigerator
to small freezer
Medium-sized refrigerator
to small freezer
Large-sized refrigerator
to medium freezer
Closed evaporator
Closed evaporator with door
Closed evaporator
10.5 in. x 11.0 in. x 6.0 in.
(266mm x 279mm x 152mm)
10.75 in. x 7.0 in. x 11.25 in.
(273mm x 177mm x 285mm)
15.0 in. x 12.0 in. x 6.0 in.
(381mm x 304mm x 152mm)
12 lbs. (5.4 kg.)
10 lbs. (4.5 kg.)
13 lbs. (5.9 kg.)
VD-153
VD-160
Optional Water-Cooling Kit
Simplify water cooling installation for your
CU-200 SuperColdMachine. Kit includes
12V DC water pump and mounting bracket,
5 ft. of 5/8" hose, 10 ft. of 3/8" hose, hose
clamps, seawater strainer, 5/8" plastic
through-hull discharge fitting, wiring diagram
and mounting screws. Pump draws less
than 1A and must be plumbed to a seawater
source for operation. P/N #C8350
Image
Model
Capacity
15.0 cu. ft. (424 liters)
4 cu. ft. (113 liters)
Large-sized refrigerator
to medium freezer
Medium- to small-sized freezer
Configuration
Closed evaporator with door
Power plate with holdover capabilities
Dimensions (WxHxD)
15.5 in. x 7.5 in. x 12.0 in.
(393mm x 190mm x 304mm)
19.0 in. x 11.25 in. 1.25 in.
(482mm x 285mm x 31mm)
14 lbs. (6.4 kg.)
23 lbs. (10.4 kg.)
Application
Net Weight
Image
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2693 Rev. 20101022
Assembled in the USA
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Do-It-Yourself Cooling Kits
17
CoolMatic Cooling Kits
Customized Do-It-Yourself Refrigeration
Dometic CU-86
condensing unit shown
Performance, efficiency, and quality are hallmarks of the CoolMatic
80 Series by Dometic. Compact, easy-to-install CoolMatic units are designed
to provide up to 8.8 cu. ft. (249 liters) of refrigeration or up to 2.5 cu. ft. (65 liters) of
deep freezing. Powered by a Danfoss BD35F compressor, the versatile CoolMatic
Series offers three different configurations for installation flexibility and tailor-made
cooling applications.
Key Benefits
■Designed
for small to medium refrigerator or
small freezer capacities.
■Designed
to work in warmer waters.
■Corrision-resistant
stainless-steel mounting
plate.
These cooling units are designed to work with CoolMatic 80 Series Evaporating
units. Six configurations are offered (see reverse side) to match the performance
■Applications
up to 8.8 cu. ft. (249 liters) of
refrigeration and up to 2.5 cu. ft. (65 liters) of
deep freezing.
of the compressor.
■Equipped
The CoolMatic Series is specifically designed to survive the rigors of the harsh
■Environmentally-safe
marine environment, and to provide exceptional performance in hot and humid
■Six
with a power-regulated Danfoss
BD35F compressor.
conditions, erratic or low voltage, and continuous use.
CU-84
CU-85
ISO 9001:2008
L–2692
Rev. 20090630
R-134a refrigerant.
evaporator types to match the
performance of the compressor (details on
reverse side).
18 Refrigerators/Freezers
Technical Specifications for CoolMatic 80 Series Cooling Units
Model
Capacity
Voltage
Configuration
Dimensions (WxHxD)
Net Weight
CU-84
CU-85
CU-86
Refrigeration: 8.83 cu. ft. (250 liters)
Deep freezing: 2.47 cu. ft. (70 liters)
Refrigeration: 8.83 cu. ft. (250 liters)
Deep freezing: 2.47 cu. ft. (70 liters)
Refrigeration: 8.83 cu. ft. (250 liters)
Deep freezing: 2.47 cu. ft. (70 liters)
12/24V DC
12/24V DC
12/24V DC
Horizontal Platform
Square Layout
Vertical or Wall Mount
15.2 in. x 6.1 in. x 5.1 in.
(386mm x 155mm x 129mm)
8.7 in. x 6.1 in. x 8.7 in.
(220mm x 155mm x 220mm)
8.7 in. x 9.0 in. x 7.6 in.
(220mm x 228mm x 193mm)
13.2 lbs. (5.98 kg.)
13.2 lbs. (5.98 kg.)
14.3 lbs. (6.40 kg.)
Installation
Technical Specifications for Adler/Barbour 80 Series Evaporating Units
Model
Capacity
Configuration
Dimensions (WxHxD)
Net Weight
VD-04
VD-05
VD-08
4.5 cu. ft. (127 liters)
4.5 cu. ft. (127 liters)
5.6 cu. ft. (158 liters)
“L” shape
Plate
90° Angle
14.8 in. x 10.0 in. x 3.9 in.
(357mm x 254mm x 99mm)
14.8 in. x 13.7 in. x 1.0 in.
(375mm x 348mm x 25.4 mm)
13.4 in. x 17.7 in. x 10.6 in.
(340mm x 449mm x 269mm)
3.3 lbs. (1.49 kg.)
3.3 lbs. (1.49 kg.)
4.4 lbs. (1.99 kg.)
Installation
Model
Capacity
Configuration
Dimensions (WxHxD)
Net Weight
VD-09
VD-15
VD-18
5.6 cu. ft. (158 liters)
7.0 cu. ft. (198 liters)
4.5 cu. ft. (127 liters)
“O” shape
Circulating Air
Plate
14.4 in. x 5.5 in. x 10.6 in.
(365mm x 139mm x 269mm)
8.6 in. x 10.8 in. x 2.6 in.
(218mm x 274mm x 66mm)
9.8 in. x 13.7 in. x 1.0 in.
(248mm x 347mm x 25.4mm)
4.4 lbs. (1.99 kg.)
4.4 lbs. (1.99 kg.)
3.1 lbs. (1.40 kg.)
Installation
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2692 Rev. 20090630
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Do-It-Yourself Cooling Kits
19
CS-NC-15 Cooling Kit
Super Compact and Easy-to-Install
CoolMatic CS-NC-17
Cooling Kit shown
The CS-NC-15 compact cooling kit consists of the high-performance
air-circulating VD-15 fin evaporator and the power-regulated
CoolMatic cooling unit. These two units in one kit offer a perfect match of
rapid-chill capability and high cooling performance.
The tried and tested Danfoss BD35F compressor ensures economical and super
quiet operation. This cooling unit is specifically designed for chest coolers with
capacities from 2.12 cu. ft. (60 liters) for deep freezing to 8.8 cu. ft. (249 liters) for
normal refrigeration.
Installation is quick and easy. All that’s required is a hole cut to match the size of
the cooling kit. The CS-NC-15 is then simply screwed from inside to the mounting
Key Benefits
■Ideal
for converting an existing, passive,
insulated cooling area into a full,
compressor-powered refrigerator.
■Up
to 8.8 cu. ft. (249 liters) of refrigeration.
■Rapid
chill capability with forced air
circulation operation.
■Efficient
■Vertical
Danfoss BD35F compressor.
layout or wall mount.
■Integrated
low voltage protection.
■Continuously
variable thermostat.
■Integrated
rubber seal ensures that the
coolbox is securely sealed.
plate.
■Coolant
lines are fully assembled and
connected at the factory.
■Environmentally-safe
ISO 9001:2008
L–2694
Rev. 20090630
R-134a refrigerant.
20 Do-It-Yourself Cooling Kits
Technical Specifications for Adler/Barbour CS-NC-15 Cooling Kit
Model
Capacity
Voltage
Dimensions (WxHxD)
Net Weight
CS-NC-15
Deep Freezing: 2.12 cu. ft. (60 liters)
Refrigerating: 8.8 cu. ft. (249 liters)
12/24V DC
10.6 in. x 14.3 in. x 8.9 in.
(258mm x 363mm x 227mm)
14.3"/363mm
14 lbs. (6.35 kg.)
2.0"/50.5mm
5.9"/150mm
8.9"/227mm
Installation
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2694 Rev. 20090630
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
10.6"/258mm
N
M ew
od L
el ow
s
Av -P
ai rofi
la le
bl
e!
Custom Refrigeration
21
KRA Cabinet Condensing Units
For Use In Refrigeration & Freezer Systems
KRA025 water-cooledonly unit shown
KRA cabinet condensing units are designed for use in direct
expansion refrigeration and freezer systems, such as cockpit freezers/
refrigerators or catch-box chillers (not holdover plate systems), and can also be
used with built-in galley freezer/refrigerators. KRA units work in conjunction with
evaporator plates installed in an insulated box, or a box wrapped with evaporator
tubing. Box temperatures between -5° F and 40° F (-20° C and 5° C) can be
achieved with the proper application.
KRA condensing units are housed in an attractive white aluminum enclosure,
which can be mounted on a vertical bulkhead or a horizontal shelf. An integral drain
pan allows any condensate to be routed to the bilge or sump.
Units are available with 1/4, 3/8, and 1/2 HP compressors, and 115V 50/60Hz or
220V 50Hz. All KRAs have a durable cupronickel water-cooled condenser. Units
are available in two condenser configurations: Air/water-cooled or water-cooled
only. This dual configuration will ensure that the unit performs efficiently in hot
engine rooms, while also allowing full air-cooled operation when no cooling water is
available.
New Low-Profile Models
The water-cooled-only models are available in a new, compact, low-profile design.
At 11" (280mm) tall, these units are 4.75" (121mm) shorter and 10 pounds (4.5kg)
lighter than before. In addition, the re-configuration of the terminal strip and
additional access covers enable easier installation and maintenance.
ISO 9001:2008
L–0831
Rev. 20100528
Key Benefits
■Refrigeration/freezer
condensing unit in
attractive white aluminum enclosure.
■Air/water-cooled
or water-cooled-only
condensers available.
■Low-profile
models available.
■Can
be mounted on a vertical bulkhead or
a horizontal shelf.
■Drain
pan allows any condensate to be
routed to the bilge or sump.
■1/4,
3/8, and 1/2 HP compressors
available.
■115V
50/60Hz and 220V 50Hz models.
■Self-sealing,
■Charged
■Digital
quick connect fittings.
with leak-detector dye.
thermostats available.
■Optional
pre-charged refrigerant lines,
in copper or flexible hose, available in
lengths up to 25' (7.62m).
■Optional
dual-box system provides two
different boxes to be set at two different
temperatures using only one condensing
unit.
22 Custom Refrigeration
Technical Specifications for KRA Cabinet Condensing Units
Model
Horsepower
Volts/Hz/Phase
KRA025
KRA025
WaterCooled Only
KRA025CK
KRA025CK
WaterCooled Only
KRA038
KRA038
WaterCooled Only
KRA038CK
KRA038CK
WaterCooled Only
KRA050
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
115/60/1
115/60/1
220/50/1
220/50/1
115/60/1
115/60/1
220/50/1
220/50/1
115/60/1
Locked Rotor Amps
(Comp)
40.0
40.0
14.8
14.8
40.0
40.0
17.5
17.5
68.0
Max. Circuit Breaker
(Amps)
15.0
15.0
5.0
5.0
15.0
15.0
10.0
10.0
25.0
Min. Circuit Ampacity
(Amps)
11.0
11.0
4.0
4.0
11.0
10.0
5.0
5.0
15.0
Full Load Amps (FLA) Cool
Width (in/mm)
6.2
5.8
3.1
2.9
6.5
6.1
3.2
3.0
8.5
14.25/362
14.25/362
14.25/362
14.25/362
14.25/362
14.25/362
14.25/362
14.25/362
16.1/409
Depth (in/mm)
8.75/222
8.75/222
8.75/222
8.75/222
8.75/222
8.75/222
8.75/222
8.75/222
10.3/262
Height (in/mm)
14.75/375
11.00/279
14.75/375
11.00/279
14.75/375
11.00/279
14.75/375
11.00/279
17.50/445
Weight (lbs/kg)
50/22.7
40/18.1
50/22.7
40/18.1
51/23.1
41/18.6
51/23.1
41/18.6
65/29.5
Water inlet
Service ports
H
Discharge connection
Suction connection
Water outlet
Condensate drain
D
W
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–0831 Rev. 20090821
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Custom Refrigeration
23
Grunert Passagemaker Series
AC Operation Refrigeration Systems
Passagemaker AC450
model shown
Grunert Passagemaker compressors are hermetically sealed for
quiet, efficient operation. Vibration isolators are incorporated in all mounting
platforms to provide additional noise reduction.
Key Benefits
■Filter/drier
is replaceable without refrigerant
charge loss.
■Effectively
cools one or multiple boxes of
virtually any configuration.
■Sight
glass / moisture indicator assembly to
monitor system refrigerant charge.
■Remote
electrical box is completely enclosed
to protect all components.
■5'
(1.5 m) harness allows for a dry, accessible
mounting location.
■Low
12 voltage controls provide an extra
margin of safety.
■Hermetically
sealed compressor for quiet,
efficient operation.
■Vibration
isolation mounts for additional noise
reduction.
■Charge
Guard® protection provides sealed
access ports to ensure system integrity during
handling and installation.
ISO 9001:2008
L–2146
Rev. 20091023
24 Custom Refrigeration
Technical Specifications for Passagemaker Series
Model1
Refrigerant
Charge (oz./g.)
Capacity (BTU/hr)2
26°F (-3°C)
0°F (-18°C)
-9°F (-23°C)
-18°F (-28°C)
Electrical Data
RLA - 115V/230V
(water-cooled)
RLA - 115V/230V
(air/water-cooled)
LRA - 115V/230V
Max. Circ. Breaker
115V/230V
Min. Circ. Ampacity
115V/230V
AC425
R-404A
26/737
AC450
R-404A
50/1420
AC475
R-404A
50/1420
AC4100Z
R-404A
50/1420
AC4150Z
R-404A
76/2152
AC4200Z
R-404A
76/2152
1850
1650
1500
1250
3400
2800
2200
1800
5000
4200
3600
3200
6500
5500
4500
3900
9000
7000
5500
4800
15000
11900
9350
480
5.9/2.9
6.7/3.0
15.2/7.7
– /10.9
– /10.9
– /18.6
6.9/3.4
7.7/3.5
16.2/8.2
– /11.4
– /11.4
N/A
40.0/20.5
68.0/34.0
59.0/37.0
– /56.0
– /56.0
– /107.0
15.0/10.0
20.0/10.0
35.0/15.0
– /25.0
– /30.0
– /40.0
10.0/5.0
16.0/7.0
27.0/14.0
– /20.0
– /20.0
– /30.0
14.1/358
13.1/334
13.6/346
14.1/358
13.1/334
14.8/375
20.0/508
17.0/432
15.3/387
20.0/508
17.0/432
15.3/387
20.0/508
17.0/432
16.0/406
75.0/34.0
93.0/42.2
77.0/34.9
95.0/43.1
92/41.7
110/49.9
Unit Dimensions (in/mm)
14.1/358
D (Depth)4
13.1/334
W (Width)5
H (Height)
10.5/267
Electrical Box Dimensions (in/mm)
D (Depth)
W (Width)
H (Height)
Weight (lbs/kg)6
Net
47.0/21.3
Ship
63.0/28.6
10.875/276
10.625/270
4.0/102
78.0/35.4
94.0/42.6
74.0/33.6
92.0/41.7
Notes:
Add a ‘Z’ to the model number to indicate 230 VAC for models AC425 through AC475. Also
add HA to model numbers for air cooled option (not available on AC4200Z).
BTU/hr. ratings are the average rate of heat extraction from holdover plates and are not the
capacity of the compressor or condensing unit. These figures are to be used to determine
run times required to maintain box design temperatures.
3
Physical dimensions of 50Hz models may vary.
4
Add 2" (51 mm) for condensate hose connector. Add additional 10.75" (273 mm) for air
cooled option.
5
Add ½" to width for air cooled option on AC425-475HA.
6
Add 8 lbs (3.6kg) for remote electrical box. Add 20-30 lbs. for air cooled option. All weights
include refrigerant charge. Ship weights include electric boxes.
1
2
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2146 Rev. 20091023
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Custom Refrigeration
Custom Evaporators
Custom Flat Plate Evaporators
Custom stainless steel plates are available for installation into an
insulated box. The plates have stainless tubing with special heat
transfer compound to improve efficiency. Rectangular plates of
any dimension from 10" - 36" (254mm - 914mm) are available.
Plate size is chosen to maximize the surface area in the box, with
a minimum of 40% of the inside wall area covered. Plates are
pre-charged with R-134A, and have quick connect fittings. Plates
without charge are also available.
Custom Wrapped Box Evaporators
Custom Stainless Flat Plates Shown
Cruisair custom wrapped boxes are ideal for use where a clean
box interior is necessary, although almost any refrigeration
application can be built. Using the wrapped box as bait
freezers or catch boxes helps keep the items from freezing to
the evaporator surface, and aids in cleaning of the box. The
fiberglass box is wrapped with copper tubing and pre-charged
with R-134A at the factory. A special heat transfer compound is
used to help heat transfer from the box to the tubing. All boxes
are supplied with quick connect fittings to speed installation. In
fact, Cruisair can offer a turn-key product: the fiberglass box per
your design, wrapped with tubing and insulated.
Pre-charged 3/8" copper tubing for wrapping boxes is also
available in lengths of 50' - 150' (15.2m - 45.7m).
Contact the applications department for help in designing your
refrigeration system.
Custom Wrapped Box Evaporators Shown
Key Benefits
Custom Wrapped Box
•Inside of freezer box is free of all refrigeration equipment, and has a clean look.
• Less holes through box mean less chance of content leakage.
• There are no plates for food, bait, or catch to freeze on.
• Easy cleaning of box.
• Excellent performance as a freezer or refrigerator.
•Factory sealed refrigerant connections of evaporator tubing.
• Cruisair will help design the box that will fit your needs.
•Refrigeration plates can be built to the exact dimensions of each
particular box requirement.
•Cruisair refrigeration plates are ideal for both freezer and
refrigeration applications.
•Refrigeration plates are constructed of durable 18 gauge 304
stainless steel which will resist corrosion from harsh environments
and damage from objects in the box.
•Total thickness of plate is held to a max. of 5/8” which allows for use
of virtually all of the interior of the box.
•Cruisair can build a turn-key unit which includes the fiber glass box, tubing wrap, and insulation.
•Refrigerant tubing is spot welded to the underside of the plate. The
tubing is 3/8" stainless steel, so it also resists corrosion from harsh
environments.
Custom Flat Plates
•Cruisair will help with box design, thickness, condenser sizing and
plate sizing.
•Cruisair custom stainless steel refrigeration plates can be the answer to refrigeration of your fish box, cockpit freezer, drink box,
bait freezer, or any other custom refrigeration needs.
ISO 9001:2008
L–0974
Rev. 20060518
25
26 Custom Refrigeration
Specifying Your Custom Flat Plate Evaporators
To Determine what size plates you will need to order, first decide where
you can place the plates in the box to maximize plate surface area. Plate
surface area should be at least 40% of the box's total surface area, which
means adding all six sides of the inside of the box into the equation. Less
plate surface can be used when box is operating only as a refrigerator
(35°F+).
For example, a box that is 20" long, 20" deep, and 10" wide has a total of
1600 sq. inches. Forty percent of 1600 sq. inches is 640 sq. inches, so we
will need plates to cover at least 640 sq. inches. If we pick the two ends,
that only gives about 400 sq., but if we cover the two sides that are 20" x
20", we have about 800 sq. inches to cover. This would give enough plate
surface area to efficiently cool the box.
When ordering, be sure to specify length and width of plate, where the
refrigerant lines need to come out of the plate, and length of the lines.
Contact the applications department for help in designing your
refrigeration system.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–0974 Rev. 20060518
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Custom Refrigeration
Dry Evaporator Plates
Features
•Grunert stainless steel dry Evaporator Plates provide an
effective solution for cooling cockpit freezers, drink boxes and
custom refrigeration applications.
•Evaporator plates are a cost effective solution when holdover
systems are not required.
•Evaporator plates can be specified for both refrigeration and/
or freezer applications.
•Minimal plate thickness (9/16") allows for a clean, wall to wall
installation inside any box.
•Plates are constructed of 20 gauge #304 stainless steel for
strength and a #3 finish for aesthetics.
•Refrigerant connections are constructed of 3/8" O.D. copper
tube. Optional flare quick disconnect (QD) or swagelok fittings
are available upon request.
•Properly sized plates will rapidly lower and thermostatically
maintain box temperature on demand. Properly insulated
boxes will maintain desired temperatures with minimum compressor duty cycles.
ISO 9001:2008
L–2148
Rev. 20060530
27
28 Custom Refrigeration
When choosing the proper plate sizes, primary consideration should
be given to calculated BTU loads as well as box design and usage.
Any special requirements must be determined prior to selection and
installation.
Evaporator plates may be used for freezer or refrigerator box applications.
Plates must be specified for horizontal or vertical operation and must be
oriented correctly when mounting. Vertical plates must be mounted with
the refrigerant connections going up or down. However, in either case,
the refrigerant must feed into the tube on the right. Horizontal plates must
be mounted with the refrigerant connections going left or right. However,
in either case, the refrigerant must feed into the bottom tube. Either may
be used as a shelf across the interior surface. Each plate has mounting
flanges with 1/4" diameter holes for securing the plates.
Plates must be mounted with stand-offs to expose the back surface area
of the plate to provide proper performance. A minimum of 5/8" clearance
between the box and the back of the plate is recommended.
Expansion valves must be located and fastened properly. Do not install
expansion valves with the diaphragm on the bottom. Recommended
location of the valve is in the box with the plate(s). The expansion valve
sensing bulbs are to be properly located and secured on the outlet
(suction line) of the last plate(s) in series. Recommended location is on
a horizontal portion of tubing on the top (between ten and two o’clock).
If either the expansion valve or its sensing bulb must be located outside
of the box, each part must be properly insulated to protect against
condensation, as well as to allow accurate temperature sensing of the
bulb.
Information needed when ordering dry flat evaporator plates:
1) Measure internal dimensions of refrigerator/ freezer box.
2) Calculate internal volume of box ((see example below).
3) Measure thickness of insulation around box.
4) Use appropriate chart below to get BTU/Hr gain.
5)See charts on front of this sheet to determine which plate(s) will fit
your application.
6) Type of plate needed:_______horizontal_______vertical
7) List dimensions of plate(s), (width x height) ______" x______".
8) Will plates fit through the opening of the box: yes/ no.
9) Length of refrigerant connections (8” is standard) ______".
10)Location of connections on horizontal plate, top/center/bottom
(center is standard)__________.
Location of connections on vertical plate, left/center/right
(center is standard)__________.
HORIZONTAL PLATE SHOWN
SEE FRONT OF THIS SHEET
FOR VERTICAL PLATE CONFIGURATION
48 Example Circled: A 10° freezer box with inside dimensions of 24" height, 12" depth and 18" width has an internal volume of 5,184 in3 (24.00" x 12.00" x 18.00"). Divide the 5,184 in3 by 1,728 (one cubic
foot) to get three cubic feet. With 4"of insulation, a 48 BTU/hr gain is found on the chart. Referring to the capacities charts on the front of this sheet, two 12.00" x 12.00" horizontal (48 BTU/hr), two 13.50" x
10.50" vertical (48 BTU/hr), one 12.00" x 23.25" horizontal (50 BTU/hr) or one 13.50" x 21.75" vertical (50 BTU/hr) plate(s) may be used.
* To convert cubic meters to cubic feet, multiply by 35.31
** Two pound density poly-foam insulation with an R value of 5.5 and ambient temperature of 95° F.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2148 Rev. 20060530
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Custom Refrigeration
Holdover Plates
True Eutectic Solution
• Specially formulated mixture of water, salts and inhibitors.
• Provides stable box temperatures throughout holdover period.
• Injected into plates under a vacuum (30 microns).
•Four temperature ranges available: 0°F (-18°C), -9°F (-23°C),
and -18°F (-28°C) for freezer applications and 26°F (-3°C) for
refrigerator applications.
Unique Stainless Steel Construction
•Hand polished #304 stainless steel (.062) for clean, aesthetic
appearance.
• Easy mount flange system on short side of all plates.
•Internally gusseted steel tubing improves thermal transfer and is
high pressure tested to 550 psi.
• Hand welded seams by certified TIG welders.
•Wide variety of sizes and ranges to accommodate various box
designs.
Dual Circuit Design
•Permits paralleled operation for engine drive and AC or DC
voltage condensing units for redundancy.
• Retrofit crossover assembly for easy conversion to single unit.
•Rapid “pull down” of plate temperature when run with a double
pass on one condensing unit.
•Dual set of thermostat sensing wells for accurate temperature
control.
Plate Selection1
Capacity (BTU/hr)
Refrigerator (26°F/-3°C)
Freezer (0°F/-18°C)
Freezer (-9°F/-23°C)
Freezer (-18°F/-28°C)
Dimensions (in/mm)2
H1 (Height)
H2 (Height)3
W (Width)
12 x 10
16 x 10
20 x 8
20 x 10
16 x 14
24 x 10
24 x 13
1243
1117
1023
1058
1708
1536
1438
1486
1980
1780
1480
1531
2174
1955
1851
1914
2356
2118
2025
2095
2653
2385
2265
2342
3469
3118
2984
3086
10.0/254
11.5/292
10.0/254
14.0/356
15.5/394
10.0/254
22.0/559
23.5/597
10.0/254
22.0/559
23.5/597
13.0/330
19.0/8.6
26.0/11.8
35.0/15.9
54.0/24.5
D (Depth)
Weight (lb/kg)
Refrigerant Connections4
18.0/457
18.0/457
14.0/356
19.5/495
19.5/495
15.5/394
8.0/203
10.0/254
14.0/356
26°F and 0°F plates = 3.0/7.6
-9°F and -18°F plates = 3.38/8.6
28.0/12.7
33.0/15.0
34.0/15.5
1/2" O.D. x 3/4" L - S.S. Stubs
Notes:
Plates can be mounted in either horizontal or vertical configurations, with connections either at right, left, up or down. Refrigerant line connections are always located on short dimension of plate.
Custom plate sizes on request.
Dimension includes two 3/4" flanges with 1/4" diameter mounting holes.
4
All plates can be prefabricated to customer’s requirements, including copper stubs, flare connections and fittings, crossover assemblies and Swagelock™ fittings.
1
2
3
ISO 9001:2008
L–2147
Rev. 20060530
29
30 Custom Refrigeration
When choosing the proper plate sizes, primary consideration should
be given to calculated BTU loads as well as box design and usage.
Any special requirements must be determined prior to selection and
installation.
Holdover plates are available with 26°F (-3°C) eutectic solution for
refrigerator box applications, and 0°F (-18°C), -9°F (-23°C) and -18°F
(-28°C) solutions for freezer box applications. The freezer plates are
identified with 1, 2, or 3 ( for the 0, -9 and -18°F plates respectively)
V-notches located on the mounting flange at the same end as the
refrigerant line connections. The 26°F plates have no notch in the flange.
All plates have a serial code and plate temperature inscribed on the back
of the mounting flange on the opposite end.
The Grunert line of holdover plates is designed to be installed in any
position on a box’s interior surface, or as a shelf across the interior
space. Each plate has mounting flanges across both short ends (smaller
dimension) with 1/4" diameter mounting holes. Secure the plate(s) with
the proper fasteners (lag screws, thru-wall connectors, etc.) to support the
weight and torsion load from the vessel’s movement.
Plates must be mounted with stand-offs to expose the back surface area
of the plate to provide proper performance. A minimum of 5/8" (1.6cm)
clearance between the box and the back of the plate is recommended.
Expansion valves must be located and fastened properly. Do not install
expansion valves with the diaphragm on the bottom. Recommended
location of the valve is in the box(es) with the plate. The expansion
valve sensing bulbs are to be properly located and secured on the outlet
(suction line) of the last plate in series. Recommended location is on a
horizontal portion of tubing on the top (between ten and twelve o’clock).
If either the expansion valve or its sensing bulb must be located outside
of the box, each part must be properly insulated to protect against
condensation, as well as to allow accurate temperature sensing of the
bulb.
Thermostat sensing bulbs are to be inserted into the sensing wells
located on the holdover plate. Two sets of wells are located on two sides
of each plate. Once a plate has been positioned in a box, the well(s) that
are located on the side (vertical surface) should be used for the most
accurate sensing of plate temperature.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2147 Rev. 20060530
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Eskimo Ice Systems
Eskimo Ice Fishbox Ice Systems
For Serious Tournament Anglers
■Keep
your catch fresh all day.
EI600D-115 SelfContained Model
Crushed ice—preferred by fishermen—cools more quickly and
packs better. A Dometic Eskimo Ice system produces up to 600 pounds (272
kg) of crushed ice per day to keep even the largest catches fresh. Ice is generated
within minutes after starting the unit, and makes up to 25 pounds (11.3 kg) of ice
Key Benefits
■Available
■Self-contained
and remote models
available with Smart Logic digital
control.
per hour under normal operating conditions.
The easy-to-install Eskimo Ice system is designed to be mounted below deck or
in 60Hz or 50Hz.
■ Up
to two remotely mounted digital
displays/user interface panels.
in an engine room where it is protected from salt spray. The ice it produces can
■
Photo-electric ice-level sensor.
be pumped through hose lengths up to 30 feet (9.1 meters) to nearly any desired
■
Start-time delay.
location onboard, such as a fish box or cooler.
■
Fresh water filter included.
All self-contained and remote Eskimo Ice systems feature the
■
Pre-charged system.
Smart Logic Digital Display. A full menu of sensors and status
■
Sensors monitor all system functions.
lights monitor gas pressure, auger motor, compressor, water
level, ice level, and ice clogs, and will shut off the system if
problems are detected. The system automatically resets and
restarts for certain key functions that can be triggered by
extreme boat motion.
Available in either 60Hz or 50Hz versions. Digital-control retrofit kits are available.
ISO 9001:2008
L–2450
Rev. 20090828
■ Manual
reset to restart system from
lock-out.
■
Improved fresh-water float switch.
■ Redesigned
refrigerant meter for
improved performance in cold water.
■ O ptional
side and top covers for
protection and improved appearance.
31
32 Eskimo Ice Systems
Technical Specifications for Eskimo Ice 600 Series
Water
Consumption
Dimensions (in/mm)
Volts/Freq/Ph
Running
Amps
LRA
EIR600-115 Condensing Unit
115/60/1
14.0
66.3
N/A
N/A
12.88/327
EIR600-115 Auger Unit
115/60/1
2.0
N/A
600 lb/day
60 gal/day
14.25/362
Model
Capacity (1)
Height
Net Weight
(lb/kg)
12.88/327
15.00/381
67/30.5
16.38/416.1
20.88/530.4
83/37.7
Width
Depth
Remote Systems
EIR600-230 Condensing Unit
230/60/1
7.0
33.5
N/A
N/A
12.88/327
12.88/327
15.00/381
67/30.5
EIR600-230 Auger Unit
230/60/1
1.0
N/A
600 lb/day
60 gal/day
14.25/362
16.38/416.1
20.88/530.4
83/37.7
67/30.5
EIR600-220 Condensing Unit
220/50/1
6.5
40.0
N/A
N/A
12.88/327
12.88/327
15.00/381
EIR600-220 Auger Unit
220/50/1
1.0
N/A
500 lb/day (2)
60 gal/day
14.25/362
16.38/416.1
20.88/530.4
83/37.7
Remote Electrical Box
N/A
N/A
N/A
N/A
N/A
9.25/234
5.38/136
6.38/162
4.00/1.81
EI600D-115
115/60/1
16.0
66.3
600 lb/day
60 gal/day
17.50/445
23.50/597
22.00/559
135.00/61.4
EI600D-230
230/60/1
7.5
33.5
600 lb/day
60 gal/day
17.50/445
23.50/597
22.00/559
135.00/61.4
EI600D-220
220/50/1
8.0
40.0
500 lb/day
60 gal/day
17.50/445
23.50/597
22.00/559
135.00/61.4
Self-Contained Systems
(2)
Notes:
(1)
Capacity ratings depend upon conditions.
(2)
Rated at 500 (227 kg) lbs per day because of 50Hz derate.
The Eskimo Ice basic kit includes:
• Ice Machine with condensate pan.
• 15' (4.5m) of ice-delivery hose and insulation.
• Electronic ice-level control unit.
• Complete installation instructions.
• Fresh water filter
EI600D Split System Installation
Ice Delivery Hose:
1-1/4" I.D. x 1-3/4" O.D.
Hose Length 1' - 30' Insulated
Fish
Box
Condensing Unit
Pump
Seawater Strainer
ENGINE ROOM
Auger Unit
Water
Line
Linesets
Water Filter
Overboard
Discharge
Thru-Hull Fitting
Fresh Water
Supply Line
Seawater Supply Line
Mid-Ship
Fresh Water
Tank
Water
Line
EI600D Self-Contained System Installation
Ice Delivery Hose:
1-1/4" I.D. x 1-3/4" O.D.
Hose Length 1' - 30' Insulated
Fish
Box
Water
Line
ENGINE ROOM
Overboard
Discharge
Self-Contained Unit
Pump
Seawater Strainer
Fresh Water
Supply Line
Seawater Supply Line
Fresh Water
Tank
Water Filter
Thru-Hull Fitting
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2450 Rev. 20090828
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
Water
Line
N 50H
ow z
Av Mo
a i de
la ls
bl
e!
Eskimo Ice Systems
Ice Cube Fishbox Ice System
Produces Up to 250 Lbs. of Ice a Day
■Keep
your catch fresh all day.
EI250D-115 shown
The Ice Cube – A Smaller Crushed-Ice System
Dometic Eskimo Ice is available in a smaller version—the Ice Cube—for boats with
Key Benefits
■Small
footprint—16" x 16" (413mm x
413mm).
less space or less demand for daily ice output. Cube-shaped, with a footprint
of only 16" x 16" (413mm x 413mm), the Ice Cube makes up to 250 lbs. (113 kg)
■
of crushed ice per day. Ice is generated within minutes after starting the unit,
■
conditions.
Available in 50Hz and 60Hz models.
Up to two remotely mounted digital
displays/user interface panels.
and makes more than 10 lbs. (4.5 kg) of ice per hour under optimal operating
■
Photo-electric ice-level sensor.
■
Start-time delay.
The Ice Cube is a self-contained unit and easy to install. The ice it produces can
■
Water filter included.
be pumped through insulated hose lengths up to 15' (4.5m), to nearly any desired
■
Pre-charged system.
location onboard, such as a fish box or cooler.
■
Sensors monitor all system functions.
Operation of the Ice Cube is easy with its Smart
Logic Digital Displays. A full menu of sensors and
status lights monitor gas pressure, auger motor,
compressor, water level, ice level, and ice clogs, and
will shut off the system if problems are detected.
But the system automatically resets and restarts for
certain key faults.
ISO 9001:2008
L-2617
33
Rev. 20090821
■Manual
reset to restart system after lock-
out.
■
Improved fresh-water float switch.
■ Ventilated
cover panels are removable
for servicing from virtually any side of the
unit.
34 Eskimo Ice Systems
Technical Specifications for Ice Cube
Model
Capacity per day (lbs/kg)
Capacity per hour (lbs/kg)
Voltage
Frequency
Full Load Amps (FLA) Cool
Locked Rotor Amps (LRA)
Refrigerant
Water consumption, gallons per day
Water consumption, liters per day
Dimensions
Height (in/mm)
Width (in/mm)
Length (in/mm)
Connections
Sea water (in/type)
Fresh water (in/type)
Weight
Net weight (lbs/kg)
Shipping weight (lbs/kg)
EI250D-115
250/113(1)
>10.42/>4.73 (1)
Seawater
Outlet
115
60Hz
9.68
40.00
R-134A
30 @ 250 lbs
113.56 @ 113.4
16.25/413
16.25/413
16.25/413
5/8"/hose barb
1/4"/SAE
Seawater
Inlet
Condensate
Drain
82.0/37.2
97.0/43.9
Recommended Ice Cube System Installation
Ice Delivery Hose:
1-1/4" I.D. x 1-3/4" O.D.
Hose Length 1' - 15' Insulated
Water
Line
Opening for
Electrical
The Ice Cube basic kit includes:
Under optimal conditions.
Fish
Box
Fresh Water
Supply
220
50Hz
4.50
14.80
Notes:
(1)
Opening for
Ice Delivery Hose
EI250D-220V/50
Overboard
Discharge
Fresh Water
Supply Line
Water Filter
ICE
CUBE
Pump
Seawater Strainer
• Ice Cube ice-making system.
• (1) Smart Logic digital display.
• Water filter.
• 15' (4.5m) of ice-delivery hose and insulation.
Fresh Water
Tank
ENGINE ROOM
Seawater Supply Line
Thru-Hull Fitting
Mid-Ship
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–2617 Rev. 20090821
Environmentally
Responsible
Specifications and availability subject to change without notice.
Dealer:
For new products and older products (still available on special request), please go to www.dometic.com/marine or call 954-973-2477. This booklet of
specification sheets is provided to you for inspection of products. Realize that these sheets contain data that is time-sensitive and subject to change without
notice. Changes are made on these sheets periodically as models are improved. We thank you for your interest in Dometic Marine.
Certified Worldwide Sales & Service Network
Represents sales
and service
coverage range
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. l Pompano Beach, FL 33069 USA l 954-973-2477 l Fax 954-979-4414
www.DometicUSA.com l [email protected]
24/7 Tech Support for United States & Canada:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
International Sales & Service:
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L–0004
LB-04 Rev. 20101210
ISO 9001:2008
Environmentally
Responsible
Made in the USA
Dealer:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement