ATEX Flameproof Exd: QC41, QC42, QC43

ATEX Flameproof Exd: QC41, QC42, QC43
EC-Type Examination
Equipment and protective systems intended for use in
potentially explosive atmospheres - Directive 94/9/EC
EC-Type Examination Certificate Number: DEKRA 15ATEX0055 X
Actuator Control Module, Series Bettis Q QC41…, QC42…
and QC43…
Emerson Machinery Equipment (Shenzhen) Co. Ltd
Bao Heng Technology Industry Park Liu Xian 1st
Road, District 68, Boan District Shenzhen, China
This equipment and any acceptable variation thereto is specified in the schedule to this certificate and the
documents therein referred to.
DEKRA Certification B.V., notified body number 0344 in accordance with Article 9 of the Council Directive 94/9/EC
of 23 March 1994, certifies that this equipment has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of equipment and protective systems intended for use in
potentially explosive atmospheres given in Annex II to the directive.
Issue Number: 1
The examination and test results are recorded in confidential test report number NL/DEK/ExTR15.0045/00.
Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0 : 2009
EN 60079-1 : 2007
EN 60079-31 : 2009
If the sign ”X” is placed after the certificate number, it indicates that the equipment is subject to special conditions
for safe use specified in the schedule to this certificate.
This EC-Type Examination Certificate relates only to the design, examination and tests of the specified equipment
according to the Directive 94/9/EC. Further requirements of the directive apply to the manufacturing process and
supply of this equipment. These are not covered by this certificate.
The marking of the equipment shall include the following:
II 2 G
II 2 D
Ex db IIB+H2 T6 or T4
Ex tb IIIC T80ºC IP66
This certificate is issued on 23 September 2015 and, as far as applicable, shall be revised before the date of
cessation of presumption of conformity of (one of) the standards mentioned above as communicated in the Official
Journal of the European Union.
DEKRA Certification B.V.
R.H.D. Pommé
Certification Manager
Integral publication of this certificate and adjoining reports is allowed. This Certificate may only be reproduced
in its entirety and without any change.
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands
T +31 88 96 83000 F +31 88 96 83100 Registered Arnhem 09085396
Page 1/2
to EC-Type Examination Certificate DEKRA 15ATEX0055 X
Issue No. 1
The Actuator Control Module, Series Bettis Q QC41..., QC42… and QC43… is used to control an
actuator to its open or closed position and is intended to be mounted to a Bettis Q valve actuator.
The position feedback is achieved by switches. The control module has a degree of protection
IP66 when mounted to a Bettis Q valve actuator with minimum IP66.
Ambient temperature range -30 °C to +60 °C.
For details about the electrical data and type designation see Annex 1 to this certificate.
Installation instructions
The instructions provided with the equipment shall be followed in detail to assure safe operation.
Test Report
No. NL/DEK/ExTR15.0045/00.
Special conditions for safe use
The manufacturer shall be contacted for information on the dimensions of the flameproof joints.
Precaution shall be taken to avoid danger of ignition due to electrostatic charges on the marking
plate of the enclosure.
Essential Health and Safety Requirements
Covered by the standards listed at (9).
Test documentation
As listed in Test Report No. NL/DEK/ExTR15.0045/00.
Page 2/2
Form 100
Version 5 (2013-07)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF