AEG | FAVORIT 99015 I | User manual | AEG FAVORIT 99015 I User manual

FAVORIT 99015 VI0P
EN User manual
2
www.aeg.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INSTRUCTIONS
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or
instruction for the operation of the appliance by a person who is responsible
for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the
appliance door when it is open.
1.2 Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Obey the installation instruction supplied with the appliance.
• Make sure that the appliance is installed below and adjacent to safe structures.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with
the power supply. If not, contact an
electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the appliance power supply
cable need to be replaced, this must
be carried out by our Service Centre.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
• Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
• This appliance complies with the
E.E.C. Directives.
Water connection
• Make sure not to cause damage to the
water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
• The water inlet hose has a safety valve
and a sheath with an inner mains cable.
4
www.aeg.com
WARNING!
Dangerous voltage.
• If the water inlet hose is damaged, immediately disconnect the mains plug
from the mains socket. Contact the
Service to replace the water inlet hose.
1.3 Use
• This appliance is intended to be used
in household and similar applications
such as:
– Staff kitchen areas in shops, offices
and other working environments
– Farm houses
– By clients in hotels, motels and other residential type environments
– Bed and breakfast type environments.
WARNING!
Risk of injury, burns, electrical
shock or fire.
• Do not change the specification of this
appliance.
• Put knives and cutlery with sharp
points in the cutlery basket with the
points down or in a horizontal position.
• Do not keep the appliance door open
without supervision to prevent to fall
on it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous.
Obey the safety instructions on the
detergent packaging.
• Do not drink and play with the water in
the appliance.
• Do not remove the dishes from the
appliance until the programme is
completed. There can be detergent
on the dishes.
• The appliance can release hot steam if
you open the door while a programme
operates.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Do not use water spray and steam to
clean the appliance.
1.4 Internal lamp
• This appliance has an internal lamp
that comes on when you open the
door and goes off when the door is
closed.
• The lamp in this appliance is not suitable for household room illumination.
• To replace the lamp, contact the Service.
1.5 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
ENGLISH
2. PRODUCT DESCRIPTION
1
2
3
12
11
10
9
8
7
6 5
4
1 Top spray arm
7 Water hardness dial
2 Upper spray arm
8 Rinse aid dispenser
3 Lower spray arm
4 Filters
9 Detergent dispenser
10 Cutlery basket
5 Rating plate
11 Lower basket
6 Salt container
12 Upper basket
2.1 TimeBeam
The TimeBeam is a display that shows
on the floor below the appliance door.
• When the programme starts, the programme duration comes on.
• When the programme is completed,
0:00 and CLEAN come on.
• When the delay start starts, the countdown and DELAY come on.
• When the appliance has a malfunction, an alarm code comes on.
3. CONTROL PANEL
Messages in the display and
acoustic signals help to operate
with the appliance.
5
6
www.aeg.com
2
1
3
4
5
6
1 On/off button
4 OPTION button
2 Menu button (up)
3 Display
5 OK START button
6 Menu button (down)
3.1 Display
B
A) This area shows messages, pro-
grammes, options and programme
phases.
B) This area shows the option symbols.
A
Symbols
DELAY START
It comes on when you activate the delay start.
MULTITAB
It comes on when you activate the multitab option.
SOUND VOLUME
It comes on when the acoustic signals are off.
EXTRA HYGIENE
It comes on when you activate the option or when
the INTENSIV PRO programme is set.
4. PROGRAMMES
Programme
Degree of soil
Type of load
Programme
phases
Options
AUTOSENSE 1)
All
Crockery, cutlery,
pots and pans
Prewash
Wash from 45 °C to
70 °C
Rinses
Dry
EXTRA HYGIENE
INTENSIV PRO
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
PROBOOST
2)
ENGLISH
Programme
Degree of soil
Type of load
Programme
phases
EXTRA SILENT
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
30 MINUTES 4)
Fresh soil
Crockery and cutlery
Wash 60 °C
Rinse
EXTRA HYGIENE
ECO 5)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
EXTRA HYGIENE
60 MINUTES
Normal soil
Crockery and cutlery
Wash 55 °C
Rinses
EXTRA HYGIENE
PROZONE 6)
Mixed soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
45° GLASS
Normal or light soil Wash 45 °C
Delicate crockery
Rinses
and glassware
Dry
PREWASH 7)
All
3)
7
Options
Prewash
1) The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy
consumption and the programme duration.
2) This programme has a high temperature rinsing phase for better hygiene results. During
the rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
3) This is the most silent programme. The pump works at a very low speed to decrease the
level of noise. Because of the low speed, the programme duration is long.
4) With this programme you can wash a load with fresh soil. It gives good washing results
in a short time.
5) With this programme you have the most efficient use of water and energy consumption
for crockery and cutlery with normal soil. (This is the standard programme for test
institutes).
6) With this programme you can wash a load with mixed soil. Very heavy soil in the lower
basket and normal soil in the upper basket. The water pressure and the water
temperature in the lower basket are higher than in the upper basket.
7) Use this programme to quickly rinse the dishes. This prevents the remaining food to
bond on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
Consumption values
Programme1)
Duration
(min)
Energy
(kWh)
Water
(l)
AUTOSENSE
40 - 150
0.6 - 1.4
7 - 14
INTENSIV PRO
150 - 160
1.4 - 1.6
13 - 14
8
www.aeg.com
Programme1)
Duration
(min)
Energy
(kWh)
Water
(l)
EXTRA SILENT
200 - 220
1.1 - 1.2
9 - 10
30 MINUTES
30
0.8
9
ECO
195
1.03
10.2
60 MINUTES
55 - 65
1.0 - 1.2
10 - 11
PROZONE
130 - 140
1.2 - 1.3
14 - 15
45° GLASS
70 - 80
0.7 - 0.9
11 - 12
PREWASH
14
0.1
4
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
5.1 Option menu
Activate or deactivate the options before the start of a programme. You cannot activate or
deactivate the options while a
programme operates.
Menu
Submenu
DELAY START
SETTINGS
Description of the option
To delay the start of the programme from 1 to 24 hours.
LANGUAGE ENGLISH
(Different languages are
available).
To set the language of the messages in the display.
BRIGHTNESS
(10 levels are available).
To increase or decrease the brightness of the display.
COLOUR
(Different colours are
available).
To set the colour of the TimeBeam.
0 = TimeBeam off.
SOUND VOLUME
(5 levels are available).
To adjust the volume of the acoustic signals.
Level 0 = volume off
RINSE AID
ON
OFF
To activate the rinse aid dispenser.
ENGLISH
Menu
9
Submenu
Description of the option
WATER HARDNESS
(10 levels are available).
To adjust electronically the level of
the water softener.
PROBOOST
ON
OFF
This option increases the water
pressure in the prewash and washing phases by 40%. The washing results are very good also with heavy
soiled loads.
MULTITAB
ON
OFF
Activate this option only when you
use the combi detergent tablets.
The programme duration can increase.
This option deactivates the use of
rinse aid and salt. The related messages for refilling stay off.
EXTRA HYGIENE
ON
OFF
This option gives better results for
the hygiene. During the rinsing
phase, the temperature stays at 70
°C for at least 10 minutes.
How to set an option
1. Press OPTION to open the option
menu.
2. Press one of the menu buttons to go
through the option menu.
3. Press OK START to confirm an option or to open the submenu.
4. Press one of the menu buttons to go
through the submenu and set an option.
5. Press OK START to confirm.
6. Press OPTION to close the option
menu.
6. BEFORE FIRST USE
1. Press the on/off button to activate
the appliance.
2. The display shows the default language: LANGUAGE ENGLISH.
• If you want to confirm English,
press OK START.
• If you want to set a different language, press one of the menu buttons to go through the list of languages and then press OK START
to confirm.
3. Press OPTION to close the option
menu.
4. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
5. Fill the salt container.
6. Fill the rinse aid dispenser.
7. Open the water tap.
8. Processing residues can stay in the
appliance. Start a programme to remove them. Do not use detergent
and do not load the baskets.
10 www.aeg.com
6.1 Adjusting the water softener
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Electronic
47 - 50
84 - 90
8.4. - 9.0
58 - 63
2 1)
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
2 1)
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
21)
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
21)
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
21)
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
21)
51)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
1
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
<4
<7
< 0.7
<5
12)
12)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or 2.
Electronic adjustment
Open the option menu and according to
the water hardness table, set the level of
the water softener. Refer to the option
menu table.
ENGLISH
11
6.2 Filling the salt container
1.
2.
3.
4.
5.
Turn the cap counterclockwise and
open the salt container.
Put 1 litre of water in the salt container (only for the first time).
Fill the salt container with dishwasher salt.
Remove the salt around the opening
of the salt container.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme.
The display shows a message
when it is necessary to refill the
salt container. The message stays
off while a programme operates.
6.3 Filling the rinse aid dispenser
Press the release button (D) to open
the lid (C).
2. Fill the rinse aid dispenser (A), no
more than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the release button locks into position.
1.
B
A
M AX
4
3 2
1
+
-
C
D
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 (highest quantity).
The display shows a message
when it is necessary to refill the
rinse aid dispenser. The message
stays off while a programme operates.
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
12 www.aeg.com
• If the display shows the salt message, fill the salt container.
• If the display shows the rinse aid
message, fill the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use combi detergent tablets,
activate the MULTITAB option.
5. Set and start the correct programme
for the type of load and the degree
of soil.
7.1 Using the detergent
A
1.
B
2.
30
3.
4
MAX
+
32
-
1
20
C
4.
5.
7.2 Setting and starting a
programme
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
3. Set a programme. You can also set
the applicable options.
4. Press OK START to confirm.
5. Close the appliance door, the programme starts.
• If DELAY START has been set, the
countdown starts when the appliance door is closed.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the appliance continues from the point of interruption.
Press the release button (B) to open
the lid (C).
Put the detergent in the compartment (A) .
If the programme has a prewash
phase, put a small quantity of detergent on the inner part of the appliance door.
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the release button locks into position.
Cancelling the delay start
while the countdown operates
The cancelling of the delay start
cancels also the set programme
and options.
1. Press and hold, at the same time,
OPTION and OK START until the
display shows the message CONFIRM CANCEL? .
2. Press OK START to confirm. The display shows the message CHOOSE
PROGRAMME .
Cancelling the programme
1. Press and hold, at the same time,
OPTION and OK START until the
display shows the message CONFIRM CANCEL? .
2. Press OK START to confirm. The display shows the message CHOOSE
PROGRAMME .
Make sure that there is detergent
in the detergent dispenser before you start a new programme.
At the end of the programme
An intermittent acoustic signal operates.
The display shows the messages PRO-
ENGLISH
GRAMME END and PLEASE SWITCH
OFF .
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
If you do not press the on/off
button, the AUTO OFF function
automatically deactivates the appliance a few minutes after the
end of the programme.
This helps to decrease the energy consumption.
13
Important
• Let the dishes become cold before
you remove them from the appliance.
Hot dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and
on the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
8. HINTS AND TIPS
8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water
softener clean and in good conditions. It
is important to set the right level of the
water softener. This makes sure that the
water softener uses the correct quantity
of dishwasher salt and water.
8.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• The rinse aid helps, during the last
rinsing phase, to dry the dishes without streaks and stains.
• Combi detergent tablets contain detergent, rinse aid and other added
agents. Be sure that these tablets are
applicable to the water hardness in
your area. Refer to the instructions on
the packaging of the products.
• Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the tablets with long programmes.
Do not use more than the correct
quantity of detergent. Refer to
the instructions on the detergent
packaging.
8.3 What to do if you want to
stop using the combi
detergent tablets
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
8.4 Loading the baskets
Refer to the supplied leaflet with
examples of the load of the baskets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items
made of wood, horn, aluminium, pewter and copper.
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove remaining food from the
items.
14 www.aeg.com
• To remove easily remaining burned
food, soak pots and pans in water before you put them in the appliance.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.
• Make sure that glasses do not touch
other glasses.
• Put the small items in the cutlery basket.
• Put the light items in the upper basket. Make sure that they do not move.
• Make sure that the spray arms can
move freely before you start a programme.
• The filters are clean and correctly installed.
• The spray arms are not clogged.
• The position of the items in the baskets is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
8.5 Before starting a
programme
Make sure that:
9. CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.
Dirty filters and clogged spray
arms decrease the washing results.
Make a check regularly and, if
necessary, clean them.
9.1 Cleaning the filters
1.
C
C
B
A
Turn the filter (A) counterclockwise
and remove it.
ENGLISH
2.
A1
3.
4.
5.
A2
6.
7.
15
To disassemble the filter (A), pull
apart (A1) and (A2).
Remove the filter (B).
Wash the filters with water.
Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge
of the sump.
Make sure that the filter (B) is correctly positioned under the 2 guides
(C).
Assemble the filter (A) and put it
back in filter (B). Turn it clockwise
until it locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
9.2 Cleaning the spray arms
9.4 Internal cleaning
Do not remove the spray arms.
If the holes in the spray arms are clogged, remove remaining parts of soil with
a thin pointed object.
If you regularly use short duration programmes, these can leave deposits of
grease and limescale inside the appliance.
To prevent this, we recommend to run
long duration programmes at least 2
times per month.
9.3 External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning
pads or solvents.
10. TROUBLESHOOTING
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution to the problem.
Display
TimeBeam
With some problems, the display
shows a message and the TimeBeam
shows an alarm code.
Problem
OPEN THE TAP
The appliance does not
fill with water.
DRAIN BLOCKED
The appliance does not
drain the water.
16 www.aeg.com
Display
TimeBeam
Problem
The anti-flood device is
on.
SERVICE CODE
WARNING!
Deactivate the appliance before
you do the checks.
Problem
Possible solution
You cannot activate the appliance.
Make sure that the mains plug is connected
to the mains socket.
Make sure that there is not a damaged fuse
in the fuse box.
The programme does not start.
Make sure that the appliance door is closed.
Press OK START.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance does not fill with
water.
Make sure that the water tap is open.
Make sure that the pressure of the water
supply is not too low. For this information,
contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is
not clogged.
Make sure that the inlet hose has no kinks or
bends.
The appliance does not drain
the water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks
or bends.
The anti-flood device is on.
Close the water tap and contact the Service.
After the checks are completed, activate
the appliance. The programme continues from the point of interruption.
If the problem occurs again, contact the
Service.
If the display shows other messages,
contact the Service.
10.1 If the washing and drying
results are not satisfactory
Whitish streaks or bluish layers on
glasses and dishes
• The released quantity of rinse aid is
too much. Adjust the rinse aid selector
to a lower position.
• The quantity of detergent is too much.
Stains and dry water drops on glasses
and dishes
• The released quantity of rinse aid is
not sufficient. Adjust the rinse aid selector to a higher position.
• The quality of the detergent can be
the cause.
Dishes are wet
• The programme is without a drying
phase or with a low temperature drying phase.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
ENGLISH
• The quality of the combi detergent
tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid together with
the combi detergent tablets.
17
Refer to ‘HINTS AND TIPS’ for
other possible causes.
11. TECHNICAL INFORMATION
Dimensions
Width / Height / Depth
(mm)
Electrical connection
Refer to the rating plate.
Voltage
596 / 818 - 898 / 550
220-240 V
Frequency
50 Hz
Water supply pressure
Min. / max. (bar / MPa)
Water supply 1)
Cold water or hot water2)
(0.5 / 0.05 ) / (8 / 0.8 )
Capacity
Place settings
12
Power consumption
Left-on mode
0.10 W
Off-mode
0.10 W
max. 60 °C
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
12. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
18 www.aeg.com
ENGLISH
19
117925961-A-082013
www.aeg.com/shop
Download PDF

advertising