Raptor | Edge System | Raptor 75x - Eastman Machine Company

Raptor 75x - Eastman Machine Company
Raptor 75x
Multi-Ply Cutting System
Quick-connect, modular design for productivity
Eastman RaptorTM models have been uniquely crafted in the USA to automatically pull stacked material plies from the spreading table to a modular,
bristle-block conveyor bed for reciprocating knife cutting of patterns. Featuring precise system operations and driven by state-of-the-art motion control
communications, the Raptor is an industrial-strength solution for low- to high-ply cutting of flexible material goods. Eastman’s exclusive IntellicutTM knife
control software increases the accuracy and integrity of the cut from top to bottom ply. Eastman’s comprehensive range of equipment, from front-end
preparation through the cutting phase, are an integral part of composite, technical textile and apparel factories around the world.
Heavy-Duty
Software
The RaptorTM frame is made of heavy-gauge welded
The Raptor’s operating control software is all-inclusive with your purchase.
steel and is engineered to withstand challenging mass
The intelligence behind advanced operations and algorithms will become
production environments. Eastman’s exclusive tool
an integral part of your daily operations.
head design allows for a short and rigid reciprocating
The software features proactive reporting
blade which ensures less deflection when cutting
on blade-wear and usage. It also has
heavy-loads of stacked material goods — a recipe for
user-controlled settings for knife control,
accurately cut pattern pieces from top-to-bottom ply.
vacuum power and blade sharpening.
Blade image at left.
Control settings manage user levels.
Modular Design
Strength
All components of the tool head are modular making it easily accessible
The RaptorTM has been engineered to
for maintenance and replacement of internal components and
handle heavy-ounce materials like denim,
consumable items. Quick disconnect plugs further simplify the process.
high tenacity synthetics and complex fiber
The frame design is also modular; custom widths and lengths are
blends, alongside the finest silks and
available. Maximize your production and minimize maintenance time!
lightweight fabrics. Cut multiple plies at
once, shown at left.
Real-time diagnostics for immediate support
Environmental
Systems that are networked may be accessed by Eastman technicians
A variable frequency drive control with Eastman’s high-efficiency vacuum
off-site in real-time for immediate troubleshooting and support. Real-
provides consistent material compression for the entire job while reducing
time diagnostics monitor all wires and signals, as well as motors.
power consumption.
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Features
The Raptor™ Tool Head, patent pending
Safety
••Quick change knife and sharpening discs
••Six remote emergency stops: two on cutting gantry, four system-mounted
••Reciprocating knife provides precise vertical stroke cutting
••Additional gantry-mounted stop disks pause system operation until
••Intellicut knife control software ensures quality cuts from
returned to neutral and reset. Operation can then be resumed from any
TM
top to bottom ply
position
••Cutting up to 3 in. (7.5 cm) of compressed material
••Tool head is equipped with plexiglass safety window to keep hands free
••Low pressure, light-touch sharpening unit. Sharpening can be
adjusted to user defined angle. Utilizes magnets to maintain
of potential knife injury during operation
••Single turn-off point with a universal power system for lockout/tagout
even pressure of the sharpening discs against the knife edge
safeguards employees from unexpected start-up
••Stack light indicator marks operation status
ensuring the sharpest blade
••High-speed-single or dual pneumatic drills for punching
••Air chillers direct air flow onto the blade for maximum cooling
efficiency
••Easy access to knife system and assembly parts simplifies
daily maintenance procedures
Options
••Knife Chiller | Direct knife cooling improves cutting
speeds and the ability to cut heavier-ounce materials
••Lateral drive | Motorized device for moving the system
Other Features
••Cutting area is made up of durable bristle blocks
••Reciprocating knife blade penetrates bristle blocks with precision and
from one spreading table to another
minimal damage to cutting area
••Automatic bristle cleaner | No separate cleaning cycle
••Easy to replace, the bristle blocks snap-in and snap-out individually,
••Motorized Resealer | Reseals the area that is cut to generate
featuring a unique design for maximum life
better vacuum hold-down so that material does not shift while
••Blast gate reduces time in advancing material
being cut.
••Optional overhead light maximizes visual inspection of parts
••Heavy-Duty Knife | Lower blade deflection for tough materials
Spreading Options
Raptor Technical Specifications
BASIC SPECIFICATIONS
Custom widths and lengths
available. Contact the factory
for additional specifications.
Maximum Thickness of
Compressed Material
ENGLISH (METRIC)
Width
Length
Drive System
Raptor 75x
78.74 in. (2.00 m)
8.2 ft. (2.5m)
Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive,
Brushless Servo Motors
3 in. (7.5cm)
POWER REQUIREMENTS
Control Power
Vacuum Blower
Pneumatic
208/230/380/460/575V, 3 ph, 50/60 Hz, 9.0 kVA
208/230/380/460/575V, 50/60 Hz, 30 HP, VFD control
90 psi (6.2 bars), 18 cfm
Maximum Cutting Speed (Material Dependent)
Maximum Conveyor Speed
Maximum Acceleration
Reciprocating Knife Speed
Up to 40 in./sec. (60m/min.)
8 in./sec. (12 m/min)
0.8 g
Variable up to 5,000 RPM
Electric
SPEEDS
ENVIRONMENTAL
Sound Level
Operating Temperature
Humidity
<76 dB(A)
55 – 100°F (12 – 37°C)
20 – 80% (non-condensing)
**Achievable speeds and accelerations are tool-, material- and thickness-dependent. All indicated speeds, dimensions, weights and
performance data are approximate and subject to change without notice.
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
August 2013
EASTMANCUTS.COM
Eagle C125 Conveyor Cutting System
Taking continuous
cutting to new heights
The Eagle™ C125 conveyor system has supreme capabilities for single- to low-ply cutting requirements. It has the ability to continuously convey rolled
material goods with consistent speed and control. Eastman’s gantry and tool-head design are engineered to cut the most diverse technical and
industrial fabrics available, while exceeding industry standards for accuracy. The robust conveyor design delivers unrivaled levels of material utilization
and is often capable of cutting multiple layers without plastic overlay*. This computer-controlled cutting system requires minimal operator guidance to
automatically feed and spread material to the identified start position. Smooth and accurate cutting of long markers is accomplished with the support of
a powerful, yet quiet and self-contained vacuum system.
Cutting Surface
Material Hold-Down
Made to Order
The cutting surface is a smooth and durable,
The C125 is equipped with a self-contained, high-flow
Available in a range of widths,
high-durometer cast urethane conveyor belt
vacuum system to ensure optimum material hold-down
lengths and various tool head
suitable for even sticky or downy materials.
for cutting. Millions of holes are perforated in a random
accessory options, the C125
It has proven reliable for 2,000+ hours of
pattern that provides evenly dispersed vacuum flow, no
will be built to match your appli-
normal operation, with some customers
matter where you are cutting. The piece removal zone is
cation needs, allowing you to
testifying to more than four years of continu-
integrated into the design, eliminating the need for
customize the tools and capabili-
ous use.
extension tabling.
ties to maximize productivity.
International Compliance Ratings
The operating computer, and control cabinet
Industrial Design for Rigorous Use
•
are housed in independent enclosures that
Advanced electro-pneumatic regulator for precise tool
pressure control
are sealed to offer dust and water resistant
•
Built-in surge protection to block voltage spikes and surges
protection in harsh or high particulate
•
Heavy-duty cable connectors
environments. Additionally, cabling connectors,
•
Hi/Low voltage systematic panel layout for easy troubleshooting
servo motors and display components meet
•
Easy access, sealed doors for inspection and maintenance
recognized international protection ratings
•
Heavy-gauge steel construction with scratch-resistant powder
coated finish
requirements.
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
*Material dependent
EASTMANCUTS.COM
Flexible Design
Tool Head
Safety
• Four remote emergency stops: two on cutting gantry,
two system-mounted
• Additional gantry-mounted stop disks pause system operation
until returned to neutral and reset. Operation can then be
resumed from any position
• Tool head is equipped with plexiglass safety window to keep
hands free of knife during operation
• Single turn-off point with a universal power system for lockout/
tagout safeguards employees from unexpected start-up
Choice of standard, heavy-duty or fiber
tool head, featuring individually aligned
and calibrated tool spindles with your
choice of over 60 blades, punches and
notches.
A library feature within the operating
control software allows the opeartor to
save commonly used tool pressures and
blade assignments based on job and
material files.
Marking/Labeling
All tool heads are equipped with a pen or
Sharpie® assembly for marking. Additional
options available for airbrush ink spray,
adhesive labels or drop-on-demand inkjet.
Options
Additional Solutions
EasiHold® | for cutting lofted material
EasiLabel | adhesive label system
■■ EasiMark | airbrush marking system
■■ JetPRO
| drop-on-demand inkjet
■■ ■■ Variety of material
handling equipment
■■ Fiber tool head
■■ Heavy-Duty tool head
■■ Conveyor Technical Specifications*
BASIC SPECIFICATIONS*
Please contact the factory for active
cutting zone dimensions. Custom
widths and lengths available.
ENGLISH
Width
Length
Drive System
METRIC
78 in.
1.98 m
96 in.
2.44 m
108 in.
2.74 m
114 in.
2.90 m
126 in.
3.20 m
156 in.
3.96 m
12 ft.
3.66 m
16 ft.
4.88 m
20 ft.
6.10 m
36 ft.
10.97 m
Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors
POWER REQUIREMENTS
Electric
Diagnostic Control Cabinet/PC
Vacuum Blower
Pneumatic
230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down transformer required for other voltages.
208/230/380/460V, 3 ph, 50/60 Hz, 10 HP, VFD control
75 – 90 psi at 15 SCFM
5.17 – 6.2 bars at 0.42 cmm
SPEEDS
Maximum Cutting Speed
Maximum Conveyor Speed (System size dependent)
Maximum Acceleration
Maximum X/Y Speed
60 in./sec.
11 in./sec.
1.3 g
60 in./sec.
152.4 cm/sec.
28 cm/sec.
ENVIRONMENTAL
Compressed Air Consumption
Sound Level
Operating Temperature
Humidity
15 CFM
<76 dB(A)
55 – 100°F
20 – 80% (non-condensing)
12 – 37°C
*Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
August 2013
EASTMANCUTS.COM
Eagle S125 Static Table Cutting System
Go ahead. Get tough.
Eastman’sstatictablesystemiscapableofcutting,marking,drillingandpunchingvirtuallyanyflexiblematerialatspeedsofupto60inches
per second (152.4 cm/sec.). The static cutting table has proven itself as the go-to resource for materials like cotton, nylon and vinyl as well as
difficult-to-cutmaterials—suchaspolystrand,p-tex,andfiberglass-polyesterblends.Thestatictablesystemisavailableinarangeofsystem
lengthsandwidthstomeetthedemandsforprototypes,one-offsandfull-productionruns.Thesystem’shigh-precisionconfigurationfeatures
multi-axismotionformoredefinedandaccuratecuts.Materialisspreadacrossthestatictablebyanoperatororwiththeuseofapneumatic
gripperbar.Theopenplenumvacuumsystemdesignensuresevenlydispersedairflowforoptimalmaterialhold-down.Thiscomputer-controlled
systemfeatureszoningcapabilitiestoenablecuttinginoneareawhiletheoperatorissimultaneouslypickingpartsinanother,maximizingdaily
production capacity.
Cutting Surface
Material Hold-Down
Made to Order
The standard cutting surface is a porous
TheS125isequippedwithahigh-flowvacuumsystem
Available in a range of widths,
plastic sheet. Alternative cutting surfaces are
to ensure optimum material hold-down for cutting. The
lengths and various tool head
available to optimize cutting results for any
poroussurfaceensuresevenlydispersedvacuumflow,
accessory options, the S125
given material or aid in controlling material
no matter where you are cutting. Cutting zones may
will be built to match your appli-
contamination concerns. Proven reliable for
be designated so that cutting occurs in one area while
cation needs, allowing you to
2,000+hoursofnormaloperationuse.
piece removal takes place in another.
customize the tools and capabilitiestomaximizeproductivity.
International Compliance Ratings
The operating computer, and control cabinet
Industrial Design for Rigorous Use
•
are housed in independent enclosures that
Advanced electro-pneumatic regulator for precise tool
pressure control
are sealed to offer dust and water resistant
•
Built-in surge protection to block voltage spikes and surges
protection in harsh or high particulate
•
Heavy-duty cable connectors
environments. Additionally, cabling connectors,
•
Hi/Low voltage systematic panel layout for easy troubleshooting
servo motors and display components meet
•
Easy access, sealed doors for inspection and maintenance
recognized international protection ratings
•
Heavy-gauge steel construction with scratch-resistant powder
requirements.
coatedfinish
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTmANCuTS.COm
Flexible Design
Tool Head
Safety
• Four remote emergency stops: two on cutting gantry,
two system-mounted
• Additional gantry-mounted stop disks pause system operation
until returned to neutral and reset. Operation can then be
resumed from any position
• Tool head is equipped with plexiglass safety window to keep
hands free of knife during operation
• Single turn-off point with a universal power system for lockout/
tagout safeguards employees from unexpected start-up
Options
Choice of standard, heavy-duty or fiber
tool head, featuring individually aligned
and calibrated tool spindles with your
choice of over 60 blades, punches and
notches.
A library feature within the operating
control software allows the opeartor to
save commonly used tool pressures and
blade assignments based on job and
material files.
Marking/Labeling
All tool heads are equipped with a pen or
Sharpie® assembly for marking. Additional
options available for airbrush ink spray,
adhesive labels or drop-on-demand inkjet.
Additional Solutions
EasiHold® | for cutting lofted material
EasiLabel | adhesive label system
■■ EasiMark | airbrush marking system
■■ JetPRO
| drop-on-demand inkjet
■■ EasiPull
| material pulling system
Fiber tool head
Heavy-Duty tool head
■■ Router tool head
■■ Laser tool head
■■ ■■ ■■ ■■ Static Cutting Table Technical Specifications*
BASIC SPECIFICATIONS*
Please contact the factory for active
cutting zone dimensions. Custom
widths and lengths available.
Width
Length
Drive System
english
54 in.
60 in.
72 in.
78 in.
96 in.
108 in.
114 in.
126 in.
156 in.
8 ft.
12 ft.
16 ft.
20 ft.
36 ft.+
metric
1.37 m
1.54 m
1.82 m
1.98 m
2.44 m
2.74 m
2.90 m
3.20 m
3.96 m
2.44 m
3.66 m
4.88 m
6.10 m
10.97 m
Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors
power requirements
Electric
Diagnostic Control Cabinet/PC
Vacuum Blower
Pneumatic
230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down transformer required for other voltages.
208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional
75 – 90 psi at 15 SCFM
5.17 – 6.2 bars at 0.42 cmm
SPEEDS
Maximum Cutting Speed
Maximum Acceleration
Maximum X/Y Speed
60 in./sec.
1.3 g
60 in./sec.
152.4 cm/sec.
ENVIRONMENTAL
Compressed Air Consumption
Sound Level
Operating Temperature
Humidity
15 CFM
<76 dB(A)
55 – 100°F
20 – 80% (non-condensing)
12 – 37°C
*Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.
10-29- 2013
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
east m anc u ts . co m
Combi Laser & Cutting - Static Table System
• Cut, mark, punch and seal edges all on one system
• Laser provides cintered edge to prevent fraying - great
for materials like nylon and other materials that unravel.
• Single gantry design offers three cutting tools, a laser and
a marking tool, minimizing switchover time between
Sealed Edge, Precision of Cuts
material files and set up. (Laser and blade cutting cannot
The Eastman combination laser and cutting system offers a laser
be performed simultaneously).
for cutting fabrics that require a fused edge as well as the proven,
reliable technology of Eastman’s static cutting table. The tool head
is equipped with a 200 watt gas assist laser (100 watt optional),
three individually aligned and calibrated tool spindles, and a
• 200 watt laser has no contact with the fabric, improving
the quality and speed of the cut
• Adjustable laser power within software, reducing
pneumatic pen/marker holder.
unnecessary operating costs
Laser Technical Specifications
STANDARDS
ENGLISH
METRIC
72 in.
Width
78 in.
Length
Up to 100 ft.
Please contact the factory for active cutting zone dimensions. Custom widths and lengths available.
1.82 m
1.98 m
Up to 30 m
POWER REQUIREMENTS
Electric
Diagnostic Control Cabinet/PC
Vacuum Blower
Pneumatic
230V, 3ph, 50/60 Hz, 30 amps
208/230/380/460/575V, 3ph, 50/60 Hz, 7.5 HP, VFD control optional
75 – 90 psi at 15 SCFM
5.17-6.2 bars at 0.42 cmm
SPEEDS
Material and table length dependent
Maximum Laser/Plotting Speed
Material and table length dependent
ENVIRONMENTAL
Compressed Air Consumption
Sound Level
Operating Temperature
Humidity
15 CFM
<75 dB(A)
55 – 100°F
20 – 80% (non-condensing)
12 – 37°C
*Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
August 2013
Combi Router & Cutting - Static Table System
Dual router and static
cutting table system
Eastman’s router tool head option delivers heavy-duty
performance for thick and dense materials. This system offers
a two-spindle tool head in addition to the router for a variety of
cutting and routing options. Features such as a pneumatically
controlled z-axis and a manually adjustable depth-control
function facilitate cutting materials such as soft or hard wood,
composites, fiberboard, and a variety of plastics. A large-capacity
debris-collection system helps create a clean work environment.
• Multi-use—Cut, route, and mark
• Single- or low-ply layer cutting.
• Two spindle tool holders and a router.
• Exclusive carbon impregnated anti-static fiber belt
for long life and cutting quality
• Sacrificial routing surface.
• Large capacity router debris collection system.
Combi Router & Static Cutting Table Technical Specifications*
BASIC SPECIFICATIONS*
ENGLISH
Please contact the factory for active cutting zone
dimensions. Custom widths and lengths available.
Width
Length
Drive System
METRIC
60 in.
1.54 m
72 in.
1.82 m
78 in.
1.98 m
96 in.
2.44 m
108 in.
2.74 m
114 in.
2.90 m
8 ft.
2.44 m
12 ft.
3.66 m
16 ft.
4.88 m
24 ft.
7.32 m
36 ft. +
10.97 m +
Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors
POWER REQUIREMENTS
Electric
Diagnostic Control Cabinet/PC
Vacuum Blower
Pneumatic
115/230V, 1 ph, 50/60 Hz, 3.6 kVA
208/230/380/460/575V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional
75 – 90 psi at 15 SCFM
5.17 – 6.2 bars at 0.42 cmm
SPEEDS
Maximum Cutting Speed
Maximum Routing Speed
Maximum Acceleration
40 in./sec.
20 in./sec.
0.5 g
101 cm/sec.
50.8 cm/sec.
ENVIRONMENTAL
Compressed Air Consumption
Sound Level
Operating Temperature
Humidity
15 CFM
<75 dB(A)
55 – 100°F
20 – 80% (non-condensing)
12 – 37°C
*Achievable speeds and accelerations are tool-, material- and thickness-dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice. Maximum cutting and
routing thickness is material dependent.
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
ROUTER-082713
EASTMANCUTS.COM
Tool Heads
Heads Above the Rest
Eastman precision tools offer the utmost flexibility for hundreds of cutting applications and proven solutions for even the most difficult-to-cut
materials. Eastman’s tool heads have been engineered to offer maximum versatility and adaptability while adhering to stringent industry
requirements for accuracy, speed and repeated quality.
■■ A
library feature within the operating control software allows the operator to
save commonly used tool pressures and blade assignments based on job and
material files
Computer-assisted calibration minimizes downtime after tool changing
■■ ■■ B
lade life is dependent on the materials being cut.
Eastman tool depth limiters and exclusive tool depth gauges are available to
■■ limit the exposure of the blade and minimize blade penetration into the cutting
surface. Also great for kiss cutting when you need to cut the top layer
of material without cutting through an attached material.
Standard Tool Head
Heavy-Duty Tool Head
Fiber Tool Head
The standard tool head is equipped with three
■ Designed for more rigid materials
■ Designed for cutting fiberfill and foam
individually aligned and calibrated tool spindles
■ Two individually aligned and calibrated
■ Two individually aligned and calibrated
tool spindles, choice of up to two tools
tool spindles, choice of up to two tools
as well as a pneumatic pen holder assembly.
The spindles can be equipped with any three tool
combination to include round and drag blades,
punches and/or notches.
■ Three individually aligned and calibrated
tool spindles
■ Pneumatic pen lift/holder assembly
■ Provides more clearance for thicker
■ Provides more clearance for thicker
materials
materials
■ Stiffer, thicker tool spindles offer less
deflection when cutting rigid materials
■ Pneumatic pen lift/holder assembly
not available
■ Pneumatic pen lift/holder assembly
■ 60 – 75 mm round blades available
■ 3 inch (7.62cm) stroke
■ 3 inch (7.62cm) stroke
Over 60 Blades, Punches, Notches & More!
2” Round Knife
Drag Knife
1” Round Knife
Punch
Pen
Notch
TOOLS - 082713
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
System Options
EasiHold™
For Cutting Lofted Material
Eastman’s EasiHold™ dynamic
vacuum compressor allows users to
cut lofted material, such as fiberfill and
foam, with unparalleled speed and
ease. EasiHold’s vacuum apparatus
uses a tough, transparent plastic
voeraly to hold down porous and thick
fabrics.
The plastic curtain overlay curtain is
never cut, eliminating consumable
waste.
EasiHold is an optional feature
for the conveyor system only.
Please see conveyor cutting system
documentation for additional technical
specifications.
EasiPull™
Eastman’s EasiPull increases throughput by
streamlining spreading.
It is a perfect attachment for a longer or wider
cutting table. EasiPull utilizes a pneumaticcontrolled gripper bar to pull material from the
end of the table to the exact length needed for
each cut.
The system is equipped with a no-lift Blue Jay
End Cutter and is available for the static table
system only.
Please see static table system documentation
for additional technical specifications.
System Options August 2013
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Pattern Marking/Labeling
EasiMark™
labelPRO™
jetPRO™
Eastman’s innovative airbrush marking
Eastman’s LabelPRO™ system is for
JetPRO™ is an inkjet drop-on-demand
system, EasiMark™, can be added as
simple pattern identification. Integrated
printer allows full speed character printing
a convenient option to the tool head
with the cutting tool head, a printhead
with an ink color and formulas available
of Eastman’s Eagle™ Conveyor or
is used to print and place self-adhesive
for most surfaces.
Static Cutting Table to simplify parts
labels onto pattern pieces as they are cut.
• X,Y printer
LabelPRO™ reduces the time & effort
• Scalable fonts and barcode from 1/2”
to 2-1/2”
identification.
Airbrushing is especially useful for fabrics
required to manage cut pieces. Label
such as fiberglass and other materials
data comes directly from a CAD pattern
where traditional printing will not work.
database and can be barcoded or printed
EasiMark’s™ non-clogging ink is fed from
a reservoir mounted on the tool-head. Air
pressure sends the ink to an industrial
spray head and onto the material.
• Permanent and washable inks
• Available in single or dual airbrush
configurations
with multiple fonts.
• 2”x1” or 1.25 x .5” printheads
or labels available
• Supports numbers 0-9; characters A-Z
(capital letters only); +/-/./$/% and
SPACE
• One of seven available barcode types
may be selected (standard is CODE39)
• Printing angles include 0, 90, 180, 170,
and 360 degree
•Printing Speed: 2.5 cm/s – 100 cm/s
(actual print speed may vary between
porous and non-porous materials)
• Ink: Variety of colors (pigmented and
non-pigmented ink available)
• Manual height adjustment to raise and
lower the head
• Reservoir for ink is 1 liter
• Maximum number of characters is 13
for 2” wide label
• Tilt reductions from 100% (full vertical)
down to 10%
• 5,500 labels per roll
• “Bold” feature available to add
additional dot column for each
character.
• Reverse (mirror image), inverted (upside
down), 90 degree rotation, and negative
print are available.
Marking August 2013
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
EasiWrap Sound Curtain
Acoustic Blanket System for Sound Reduction
The EasiWrap Sound Curtain is an optional accessory for the
• Outer barrier made of silicone impregnated fiberglass cloth
static table systems and offers:
• Interior quiet barriers consist of PVC and “Quietglass” insulation
• Attached to the table with eyelet hooks, drilled into table frame
• Sound reduction
• Velcro system at panel overlaps
• Conceals under-table plumbing, the blower and cabling
• Reduces overall sound levels
• Easy Installation
• Hides plumbing, blower & cabling
• Water and oil resistant
• Flame retardant
• Priced per lineal foot
EasiWrap August 2013
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
EastmanPRO Software Suite
Tools of the Trade
EastmanPRO Software Suite
cutPRO - Operating Control Software
EastmanPRO is a sophisticated and intelligent software suite that
Eastman’s operating control software is a robust, flexibleWindows®
is the backbone of Eastman’s turnkey systems. The comprehensive
platform making it effortless to operate Eastman’s automated
software package offers powerful new ways to boost productivity while
cutting system. Included with your system investment, cutPRO
focusing your investment on the tools you need now. The flexible suite
makes it easy to import files in many formats and it puts you in
design integrates dynamic add-on capabilities and features, helping you
control of generating cut paths, managing speeds, accelerations
accomplish your tasks quickly and with better results.
and tool types per material requirement. The ability to remove
■ Build your suite—Invest in the modules you need, when you need them
■ Features rich and powerful design, as well as nesting and digitizing
tools for a wide variety of industries and applications
■ Upgrades and support packages available
common lines, duplicate
entities, and edge cuts
enhances efficiency while
maximizing material
utilization.
■ On-site and online training available
■ Piece manipulation functions
■ Intuitive, easy-to-use interface
include move, rotate, scale,
■ Available in multiple languages
■ Custom barcode reader/scanner capabilities
■ Capable of integrating with ERP systems via built-in scripting language
mirror, erase and copy
■ Adjustable speed, pressure, overcut and acceleration while
cutting is active
■ Real-time on-screen display of cutting status
■ File storage by user preference
■ Importing of most CAD file formats
■ Remote diagnostic capabilities
■ Simplified calibration
■ Material database
■ Prevent unauthorized changes to the system and software
with restricted login access
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
EastmanPRO Software Suite
patternPRO Design & Nesting Software
Eastman’s patternPRO design and nesting software is a comprehensive set of tools to help you design pattern pieces from the start with the
program’s drafting and editing tools, or even edit and finalize your existing digital patterns, all within the same easy-to-learn interface.
patternPRO - PDS
patternPRO - Mark
Merge Style Files
Merge CAD Files
Draft tool
Extend internal line
TrimHalf tools
All Rotation and flip
Join Pieces
Measurements
Change cut order
Global Change internal Parameters
Internals dialog box
Align points
Scale and shrink
Piece to hole / hole to piece
Tracing piece
Build piece
Create and cut parallel
Round corner
Create a notch
Create a button
Buttons on a line
Export to CAD
Save as PDS and DSN
Batch
Arrange to plot
Digitizer
Plot to Eastman
Plot to basic plot format
Regular 2D CAD import
Full access to preferences and view options
patternPRO - Optional Items
nest++
nest++2
Grade Module
3D Flattener (3D to 2D)
Network Keys
Standard Nesting
All flip & rotation tools
All shooting and adjusts
Internals ( CTRL + E )
Cut order view
Optimize cut order
Global Change internal Parameters
Export to CAD
Regular 2D CAD import
Plot to Eastman
Plot to basic plot format
Print minimarker
Full access to preferences and view options
patternPRO - Import Compatibility
Available within PDS and Mark
DXF
AAMA
ASTM
CADL
DFT
Gerber Cutter
HP-GL
DM-PL
Microjet
AI
SPF
Converter Modules, optional add-on:
Gerber converter
Lectra converter
Investronica converter
Micro converter
IGES
PRO-10-24-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Blue Jay Spread & End Cutting System
Precisely What You Need
The Blue Jay is available as a stand-alone end-cutting unit or with an optional Pull-Off for even
faster cutting production and improved accuracy. The system requires only one operator to spread
and cut material with the simple press of a button. The Pull-Off, a moveable pneumatic clamp,
grabs the ply to be spread and pulls it down the table to the desired length. The cutting attachment,
a powerful round knife, automatically drives across the width of the fabric in a guided track for
repeated, perfectly straight-line cutting.
•Various system footprints for savings in floor space
•Adjustable grip pressure
•One-touch joystick control
•LCD display with keypad for simple operation and
system status messaging
•Programmable lift time
•Sharpener preset
•Adjustable ply counter
•Flaw cut key
•Watchdog timer forces control box to reset in the
event of software failure
END CUTTER (CRA-395)
•Digital controls include ply counter, return carriage, auto and manual lift, sharpener mode
•Clamp pressure setting
•Clamping bar
•Remote control option
Specifications
STANDARDS
Maximum width
Horsepower
Maximum Spread Height
Maximum Cutting Capacity
Machine Weight
Traverse Cutting Speed
Blade Speed
Operating Voltage
ENGLISH
METRIC
60 to 156 in. (6 in. increments)
.20 HP
9 in.
14 in.
¾ in. material thickness
Approx. 125 lbs.
Variable
1800 RPM
220V, 5 amps, 3 ph
1.5 to 4.0m (15.2 cm increments)
22.9 cm
35 cm
1.9 cm material thickness
Approx. 56.7 kg
Variable
P U L L O F F ( C R A - 37 5 )
Specifications
Additional Options
Mirror image configuration
Custom spread programs
12.5" spread height (31.75 cm)
Air Jet for Laminates
Custom spread lengths up to 999" (25m)
STANDARDS
ENGLISH
Maximum machine speed
End Cutting Accuracy
Length of Pull
Machine Weight
Compressed Air
Electric Requirements
91 m/min.
100 yards/min.
+/- .25 in.
+/- 6 mm
32 ft., Optional: 50 ft. or 83 ft.
9.8 m, Optional: 15.2 m or 25.3 m
325 lbs.
147 kg
50 psi at 15 SCFM
3.4 bars at 0.42 cmm
220V, 8 amps, 1 ph OR 110V, 15 amps, 1 ph
HEAVY DUTY BLUE JAY
Blue Jay with Slitters
• More robust design with a heavy-duty base to help support
For added panel cutting features,
Eastman’s 548BK round knife slitters
can be added to the Blue Jay End
Cutting System. This will allow for
cutting in both horizontal and vertical
directions, maximizing material
utilization and further decrease labor
costs. Each slitter can be adjusted on
the track to within 3 in. of the width
of the table, allowing for complete
coverage of the width of the material
being cut. The number of slitters
fitted on the track is material-width
and table-size dependent.
the cutting of tougher materials, such as fiberglass
• Offset blade design to avoid material interference with the
baseplate support
•Thicker blade used to generate a tough, longer-lasting
cutting edge
•Heavy-duty shear plate with adjustable pressure has been
added to produce “scissor-like” cutting results
• The cutting blade has a unique edge relief, which helps
when cutting pre-preg materials
METRIC
Blue Jay 10-10-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Roll Stand Systems
Flexible By Design
The Roll Stand System allows the user to easily handle rolled goods for spreading onto the cutting system, maintaining precise
alignment of each ply with a photo-electric edge control unit. Many configurations and styles available.
• Widths available from 60” (1.52m) in
6” (15.2cm) width increments
• Flat fold system suitable for material on skids
• Single or multiple unit configuration for feeding several layers of material
• Optional cones and core stops available
• Not recommended for stretchy fabric or vinyl
• Expandabar available for different size cores
• Custom configurations, widths and roll weight capacities available
Single Roll (CRA-310)
Specifications
standards
Custom sizes available in 6 in.
(15.2 cm) width increments.
Width
Maximum Weight
Maximum Roll Diameter
english
metric
66 in.
72 in.
78 in.
300 lbs.
24 in.
1.7 m
1.8 m
2.0 m
136 kg
61 cm
Power requirements
110V at 15 amps, 1 ph
220V at 8 amps, 1 ph
Single Roll Heavy-Duty (CRA-315)
Specifications
standards
Maximum weight
Maximum Roll Diameter
Single Roll (CRA-315)
With Chute & Roller Assembly
english
metric
1,000 lbs.
30 in.
40 in. option
450 kg
76 cm
101 cm option
english
metric
>300 lbs, less than 1,000 lbs.
20 in.
>136 kg, less than
51 cm
Specifications
standards
Maximum weight
Maximum Roll Diameter
• Available starting at 72” (1.8m) wide, and greater
• Automatic edge control included
• Frozen bar, core stops optional
• 110V/220V, 1 phase
• Up to 2-3/4” heavy-duty roller tubes with 3-strap brake
• Shown with chute and roller assembly for feeding multiple rolls
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
eastmancuts.com
Roll Stand Systems
Motor-Driven (CRA-317)
Specifications
Standards
Maximum Weight
Maximum Roll Diameter
english
metric
2,000 lbs.
52 in.
907 kg
132 cm
Power Requirements
230V, 3 ph, 3 HP (5 HP opt.)
• Dancer bar control to minimize stretch
• Optional air shafts
• Optional 60” (152cm) roll diameter capacity,
maximum roll weight is 500lbs. (227kg)
• Automatic edge control included
• Ultrasonic beam to measure roll diameter
and control feeding speeds to the cutter
Two-Roll Heavy-Duty (CRA-318)
• 3 strap brakes
• Center roll drive
• Overhead loading only
• Roll drive can be disabled
• Includes super chucks and air bar
• Not recommended for clear material, or vinyl
Specifications
Standards
Maximum weight
Maximum Roll Diameter
english
metric
2,500 lbs.
30 in.
48 in. if only one bar used
1,134 kg
76 cm
122 cm if only one bar used
Power Requirements
110V or 220V, 1 phase
•With or without automatic edge control
• 3-strap brake
• Center support for wider machines, and for narrow heavy materials
• Shown with one bar
• Bar options include frozen, solid or expandabar
• Not recommended for stretchy fabrics, vinyl or lycra
Three-Roll (CRA-318)
Specifications
Standards
Maximum Weight
Maximum Roll Diameter
english
metric
2,000 lbs., 750 lb. per bar
20 in.
907 kg, 340 kg per bar
51 cm
Power Requirements
110V or 220V, 1 phase
• Infra-red edge control sensors to detect edge of material
• Optional 4th bar available
• Three sets of cones recommended
• Bar options include frozen, solid or expandabar
Roll Stand 10-10-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
eastmancuts.com
Power Feed Systems
Flexible By Design
The Power Feed System simplifies material feeding to the cutting system by automatically adjusting and maintaining consistent tension
for any material type. An optional photo-electric edge control unit ensures precise alignment of each ply. Available in one-roll, two-roll,
three-roll, six-roll with cart, or flat fold configurations, the Power Feed continuously supplies material for the length of marker or until the
roll is consumed.
Single Roll (CRA-355)
Specifications
standards
Width
Custom sizes available in
Maximum Weight
Maximum Roll Diameter
english
metric
78 in.
84 in.
96 in.
108 in.
6 in. width increments
1,500 lbs.
30 in.
2.0 m
2.1 m
2.4 m
2.7 m
15.2 cm width increments
680 kg
76 cm
Power requirements
110V at 15 amps, 1 ph
220V at 8 amps, 1 ph
• Automatic edge control included
• Available in mirror image or standard configuration
Two-Roll, Heavy-Duty (CRA-355)
(not shown)
Specifications
standards
Maximum Weight
Weight Capacity per bar
Maximum Roll Diameter
english
metric
5,000 lbs.
2,500 lbs.
30 in.
2,268 kg
1,134 kg
76 cm
Power requirements
110V at 15 amps, 1 ph
220V at 8 amps, 1 ph
• Automatic edge control included
• Available in mirror image or standard configuration
• Optional upgrade to pneumatic dual disc brake with inflatable bar available
Three-Roll (CRA-355)
Specifications
standards
Maximum Weight
Weight Capacity per bar
Maximum Roll Diameter
english
metric
2,000 lbs.
750 lbs.
20 in.
907 kg
341 kg
51 cm
Power requirements
110V at 15 amps, 1 ph
220V at 8 amps, 1 ph
• Automatic edge control included
• Available in mirror image or standard configuration
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
eastmancuts.com
Power Feed Systems
With Roll Stand Interface (CRA-355)
Specifications
Standards
Maximum Weight
Weight Capacity per bar
Maximum Roll Diameter
english
4,000 lbs.
750 lbs.
20 in.
1,814 kg
341 kg
51 cm
Power Requirements
110V at 15 amps, 1 ph
220V at 8 amps, 1 ph
metric
• Automatic edge control included
• Available in mirror image or standard configuration
• 6-roll cart
• Includes removable bar supports
Additional 6-Roll Capacity Cart
for Material Storage
(not shown)
Specifications
Standards
Maximum Weight
Maximum Roll Diameter
english
metric
4,000 lbs.
20 in.
1,814 kg
51 cm
• Includes 6 bars (2-3/4” diameter)
• Includes 6 sets of collars (total of 12)
• Available in mirror image or standard configuration
• Specify additional core sizes or cones required
• Larger diameter rolls may be accommodated when 1 or more bar positions are removed
• Includes removable bar supports
Front-End System Only (CRA-355)
(not shown)
Specifications
• 78” (2.0m) and wider, in 6” (15.2cm) increments
• Automatic edge control not available
• Available in mirror image or standard configuration
• No capacity for rolls
• May be used in conjunction with carousel
Power Feed 10-10-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
eastmancuts.com
Power Cradle System
Flexible By Design
The Power Cradle System provides an efficient way of feeding a variety of material to the cutting system from a cradle, in a relaxed
or tensionless state with precise edge control. This system is ideal for tightly wound materials like canvas, kevlar, cordura and other
industrial textiles.
• Variable speed rate controlled by a dancer bar
• Optional upright assembly to enhance feeding flexibility
• Tilt-back option for loading heavy material rolls
• Available in mirror image or standard configuration
• Dual-cradle configuration available
• Automatic edge control included
Power Cradle (CRA-360)
Specifications
STANDARDS
Width
Custom sizes available in
Standard Weight Capacity
Maximum Roll Diameter
Custom-built systems
available for up to
ENGLISH
METRIC
66 in.
72 in.
78 in.
96 in.
108 in.
6 in. width increments
300 lbs.
24 in.
1.7 m
1.8 m
2.0 m
2.4 m
2.7 m
15.2 cm width increments
136 kg
61 cm
48 in. diameter rolls
1.2 m diameter rolls
ENGLISH
METRIC
66 in.
72 in.
78 in.
96 in.
108 in.
6 in. width increments
500 lbs.
30 in.
1.7 m
1.8 m
2.0 m
2.4 m
2.7 m
15.2 cm width increments
227 kg
76 cm
48 in. diameter rolls
1.2 m diameter rolls
POWER REQUIREMENTS
110V at 15 amps, 1 ph
220V at 8 amps, 1 ph
Power Cradle (CRA-365)
Tilt-Back Option
Specifications
(not shown)
STANDARDS
Width
Custom sizes available in
Standard Weight Capacity
Maximum ROll Diameter
Custom-built systems
available for up to
POWER REQUIREMENTS
110V at 15 amps, 1 ph
220V at 8 amps, 1 ph
Optional Features
• Available in mirror image or
standard configuration
• Reverse Roll Attachment
• Uprights / Expandabar
• Uprights / Frozen Bar
• Out of cloth sensor
• Out of Cloth switch for use with Blue Jay system
• Loop Sensor for tension-free spreading
• Extended dancer arm
• Dual-cradle configuration available
Power Cradle 10-10-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Pacemaker
Pacemaker (CRA-120)
Eastman’s top-of-the-line manual spreader, the
Pacemaker, can be utilized efficiently and with
ease for face-up and face-to-face spreading.
This lightweight, economical machine
combines strength and reliability to increase
the productivity of your spreading operations.
The Pacemaker is equipped with end catchers,
S t a n d a rd Fe a t u re s
•Manual Edge Control
•End Catchers
•Ply Counter
•Expandabar
Specifications
STANDARDS
Maximum Roll Weight
Maximum Roll Diameter
Maximum Spread Height
Electric Power Requirements
Machine Weight
which automatically fold and clamp the fabric
at each end of the spread.
ENGLISH
METRIC
125 lbs.
24 in.
8.5 in.
110V at 7 amps, 220V at 4 amps
250 lbs.
57 kg
61 cm
22 cm
113.4 kg
Optional Features
Automatic Infra-Red Edge Control:
+/- .25 in. (6 mm) accuracy
End Catchers
Quick-Cut Attachment for face-up
spreading
Front or Double Upright
Piece Goods Bars:
Frozen Bar Assembly (250 lb. max)
Standard Expandabar (125 lb. max)
Heavy Duty Expandabar (300 lb. max)
Pacemaker 0-24-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Expandable
Expandable (CRA-8472)
The Expandable Roll Carrier is conducive to
S t a n d a rd Fe a t u re s
spreading various width materials using one
Manual Edge Control
system. The Expandable is an ideal first machine
Roll Bar
or an emergency machine for cutting rooms with
motorized spreaders. The manual edge control
and lifters guide the material onto the table as
Specifications
STANDARDS
Maximum Spread Height
Maximum Roll Weight
Maximum Roll Diameter
Roll Width
Machine Weight
the operator spreads it along the cutting table.
ENGLISH
METRIC
9 in.; 15 in. opt.
150 lbs.
57 in.; 48 in. opt.
72 in. to 84 in.
75 lbs.
22.9 cm; 38.1 cm opt.
68 kg
1.5 m; 1.2 m opt.
1.8 m to 2.1 m
34 kg
Optional Features
Double uprights
Extended Uprights
Rodway catchers
Cloth Weights
Extended Height Capacity
Expandable 10-24-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Turntable
Turntable (CRA-180)
The Turntable is a lightweight easy-to-use
spreader. When positioned at the end of a cutting
table, the material is manually spread across
the table. The maneuverable spreader adjusts
for face-up-one way, face-to-face-nap-one-way
and face-to-face spreading. To improve efficiency
when spreading face-up-one way, a guided
S t a n d a rd Fe a t u re s
•Manual Edge Control
•Roll Bar
Specifications
STANDARDS
Maximum Spread Height
Maximum Roll Weight
Maximum Roll Diameter
Machine Weight
Falcon end cutter can be added to end cut each
ply with perfect accuracy.
ENGLISH
METRIC
9 in.; 15 in. opt.
150 lbs.
24 in.; 48 in. opt.
125 lbs.
22.9 cm; 38.1 cm opt.
68 kg
61.0 cm; 1.2 m opt.
56.7 kg
Optional Features
Falcon Cut Off
Additional Lifter Arms
Double Uprights
Cloth Weights
Turntable 10-24-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
A-Frame Roll Rack
The A-Frame manual feeder is an economical
solution for trouble-free spreading of different
fabrics. The standard 78 inch wide model is fully
Specifications
STANDARDS
ENGLISH
Maximum Rolls
Maximum Weight per bar
Max. Outer Roll Diameter
Unit Height
Unit Depth
16 in.
75.5 in.
33 in.
40.6 cm
192 cm
84 cm
330 lbs.
150kg
375 lbs.
170kg
portable with a total weight capacity of 2,000 lbs.
(1000 lbs/453.6kg per side).
Width
• Fully portable, allowing goods to be unrolled
directly from the A-Frame to the cutting table
*Standard stock model
• Maneuverable narrow design with 6 inch (15.2cm)
rubber caster wheels
• 1-5/16” rotating roll bars equipped with ball bearing
brackets
• Optional cones available
METRIC
60 in.
1.52 m
72 in.
1.83 m
78 in.*
1.98 m*
84 in.
2.13 m
96 in.
2.44 m
102 in.
2.59 m
108 in.
2.74 m
126 in.
3.20 m
132 in.
3.35 m
Contact factory for wider sizes available
8 (four on each side)
250 lbs.
113kg
Heavy-Duty - 6 Roll
• Optional core reducers available
Maximum Weight per bar
Heavy-Duty - 8 Roll
Maximum Weight per bar
A-Frame 10-24-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Multi-Roll Carousel
The Multi-Roll Carousel system, available in many sizes and styles,
provides tremendously simple access to multiple material rolls for
end-of-table spreading, using minimal floor space. With the press
of a button, material rolls turn around the carousel, stopping on
the desired roll.
• Easy mobility with motorized control
• Simplified roll loading right off the floor or cart
• Shielded motors prevent materials from being
soiled
• Dual controls for loading and operating ease
• Single tower, multiple tower or overhead
configurations available
• Casters and track configuration
• Material can feed from either side
Specifications
STANDARDS
ENGLISH
METRIC
Standard Height
Maximum Width
Maximum Outer Diameter
Total Weight Capacity
Maximum Weight Per Roll
Heavy-Duty Option Wt. / Roll
10 – 24 ft.
15 ft.
36 in.
12,000 lbs.
300 lbs.
3,000 lbs.
3 – 7.3 m
4.5 m
91.4 cm
5443 kg
136 kg
1360 kg
Carousel 10-24-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Digitizing Tablet
Easy to set up, easy to use.
The digitizer’s streamlined contemporary design
makes everything look simple. And it is! Tablet
set-up is done with a user-friendly menu – there
are no dip switches to set and reset. On-tablet
soft keys make switching between user-defined
configurations as easy as one key press. It’s fast.
Efficient. Accurate. Designed to work the way you
do.
Low Profile, High Performance
The high performance tablet with the low profile. The
digitizer’s thin profile contains a wide range of impressive
features including:
• An easy, user-friendly set-up menu
• On-tablet softkeys for easy configuration switching
• Resolution 1000 lpi
• Drivers for Win 9X /Me / NT / 2000 / XP
Operating Systems and multipointing
The digitizer carries a limited lifetime warranty against manufacturing
mode, allowing mouse/cursor and tablet
defects. The accessories shipped with the AccuGrid, such as the
to work together
16-button cursors, are under warranty for two years from the date of
• 16-button cursor
purchase.
Specifications
STANDARDS
Baud Rates
Modes
Resolution
Electric Input
Safety Approvals
STANDARDS
Tablet dimensions
Weight
Operating Temperature
StorageTemperature
Humidity
1200 - 19,2000
Stream, Switched Stream, Point & Polled
1000 lpi, settable up to 100 lpmm (2540 lpi)
110V to 240V
UL 1950; CAN/CSA C22.2 No. 950; EN 60950
ENGLISH
METRIC
36” x 48”
44” x 60”
36” x 48” - 23 lbs.
44” x 60” - 31 lbs.
50º F - 104º F
14º F - 131º F
90% (non-condensing)
90cm x 120cm
110cm x 150cm
10.5 kg
14.1 kg
10º C - 40º C
-10º C - 55º C
Digitizer 10-25-13
779 Washington Street
Buffalo, NY 14203
1.716.856.2200
sales@eastmancuts.com
EASTMANCUTS.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising