Excell Weighing Scale User manual

Excell Weighing Scale User manual
Price Computing Scale
User Manual
20key
©EXCELL PRECISION CO., LTD. 2013. All rights reserved worldwide.
The information contained herein is the property of EXCELL PRECISION CO., LTD. and is
supplied without liability for errors or omissions. No part may be reproduced or used
except as authorized by contract or other written permission. The copyright and the
foregoing restriction on reproduction and use extend to all media in which the information
may be embodied.
EXCELL PRECISION CO., LTD.
TABLE OF CONTENTS
INSTRUCTION FOR USE ................................................................................................... 2
PREPARATION BEFORE USING........................................................................................ 2
CHAPTER 1 PRODUCT INSTRUCTION............................................................................. 4
1-1 INTRODUCTION .............................................................................................................. 4
1-2 ERROR MESSAGES ....................................................................................................... 4
1-3 SCREEN DISPLAY .......................................................................................................... 4
1-4 POWER SUPPLY ............................................................................................................ 5
CHAPTER 2 KEYBOARD FUNCTION ................................................................................ 6
CHAPTER 3 OPERATION INSTRUCTION ......................................................................... 7
3-1 INTERNAL VALUE DISPLAY MODE .................................................................................... 7
3-2 SETTING UP BACKLIGHT MODE (OPTION)......................................................................... 7
3-3 SETTINGS OF PRICING UNIT ........................................................................................... 7
3-4 EXTERNAL WEIGHT CALIBRATION ................................................................................... 8
3-5 EXTERNAL WEIGHT FACTORY DEFAULT SETTING ............................................................. 8
CHAPTER 4 RS232 FUNCTION SETTING(OPTION)......................................................... 9
4-1 F1 ⇒ RS-232 BAUD RATE ............................................................................................ 9
4-2 F2 ⇒ TRANSMISSION MODE ( RS-232 ) ....................................................................... 10
APPENDIX: 7-SEGMENT DISPLAY CHARACTERS ........................................................ 14
01008043
1
ZSME100000091
EXCELL PRECISION CO., LTD.
Thank you for purchasing Price Computing Scale. In order to
operate smoothly, to last the durability, and to reduce the chance of
breakdown for this product, please read this Manual carefully.
Instruction for Use
1.
2.
3.
4.
5.
6.
7.
8.
9.
In order to prevent the scale from dust and static electricity, please fix the
dustproof cover on the scale with double-sided adhesive.
The scale should not be drenched by rain or water. (If it gets wet carelessly,
please wipe it dry with a cloth. If its operation is abnormal, please send it to our
distributor for service. )
Please keep the scale in a cool and dry place. Do not store at high temperatures
or damp places.
Please keep the scale clean and free from insect infestation.
To avoid impact and it is to be used under designated pressure (the weight put on
the platter can not exceed the maximum capacity of the scale).
If the scale is not going to be used for some time, please clean it and store it in a
plastic bag in dry condition. A desiccant sachet may be included to prevent
moisture build up. The scale should be recharged every 3 months to prevent
failure of the internal rechargeable battery.
The commodity should be placed in the center of platter for accurate weighing.
The dimension of the weighted commodity should not exceed the dimension of
platter.
Please release the protection screw “4” before weighing.
Any suggestion for product is welcomed
Preparation Before Using
1. Put the scale on a firm level surface free for accurate weight readings. Adjust the four
leveling feet to get the leveling bubble at the centre of circle.
2. Scale must be used under a stable temperature and stable air flow. Avoid direct
sunlight onto the scale or near the exhaust port of ventilating system.
3. Scale must be used under individual socket to avoid the interference of other
electric appliances.
4. Remove any weight that might be on the platter before the scale is switched on.
5. Please note that when
or
symbol appears on the screen, the scale
needs to be recharged.
6. Introduction of Storage Battery
01008043
2
ZSME100000091
EXCELL PRECISION CO., LTD.
Due to the storage battery adopt the advanced free-maintaining technique, customers
need not to replenish electrolyte.
The scale should be recharged every 3 months to prevent failure of the internal
rechargeable battery.
1. The battery should be charged for 8~10 hours.
2. The temperature of battery should below 45℃.
Maintaining
1. Please do not discharge with over-current when using the battery. Please charge the
battery after discharging current.
2. Please take down the battery when the scale is not used for a long time or break the
connection of cathode.
3. Do not short the battery terminals to check whether there is current. Please check
whether the connection point is firm to guarantee good connection.
4. The battery should be replaced by specialized person. No reverse-battery or the
product will be damaged.
a) Anode of battery should be connected with Anode of product battery(usually red
cable)
b) Cathode of battery should be connected with Cathode of product battery (usually
brown cable or black cable)
c) See the picture following
Brown cable(or black cable)
connected with Anode of
battery
Red cable connected with
Cathode of battery
Safety warnings
1. The electrolyte of battery is caustic which causes metal, cotton, etc to corrode.
2. The hydrogen will be resolved when using or charging the battery and it will cause
explosion when approaches fire.
01008043
3
ZSME100000091
EXCELL PRECISION CO., LTD.
Chapter 1 Product Instruction
1-1 Introduction
1. High performance A/D converter
0.3 uv/D high sensitivity
• Sampling speed 15 tines/second
• non-linear scale 0.01% full scale
•
zero point adjustable range -5mV~ +5mV
• use range -4mV ~ +4mV
• load cell stimulate power source 5V DC ±2%
100mA
•
2.
3.
4.
5.
6.
linearity calibration function
one group of RS232 output
adapter or rechargeable battery
LCD display
battery low protection
(When battery voltage is lower than system voltage , the system will cut the power off
automatically to ensure its stable and accuracy.)
7. LED backlight
1-2 Error Messages
⇒ The weight value is over 9 division of maximum capacity.
⇒ Zero value above 10% full scale.
⇒ Zero value below 10% full scale.
⇒ The internal value is over 350,000.
⇒ The internal value is below 80,000.
- - - - - ⇒If the negative weight is over 20 divisions and there is no T or PT, the
display shows
“- - - - - -”
1-3 Screen Display
Weight
Z
T
kg
Unit Price
To t a l
$/kg
M+
.
.
.
.
.
.
.
.
.
.
.
Price
$
.
.
.
.
.
.
Display Column
1. Weight
6 digits in total display the weight on platter.
The left digit is able to display the negative symbol.
01008043
4
ZSME100000091
EXCELL PRECISION CO., LTD.
2. Unit Price
6 digits in total display the unit price of objects on platter.
The decimal point floats two digits.
3. Total Price
6 digits in total display the total price of the objects on platter or the accumulation.
Symbol Display
1.
Z
:
“Zero” indication.
2. T
:
“Tare” indication.
3. M+ :
4.
:
“Accumulation” indication.
Low battery.
1-4 Power Supply
Power Selection
1. 6 V / 4 Ah Rechargeable battery
2. 110 / 220 V ±15 % AC Main power
Recharge Voltage
1. AC 110 V +10%, -15%
2. AC 220 V +10%, -15%
Power Consumption
30 mA (system + no backlight)
About 140 hours
40 mA (system + front display backlight)
About 100 hours
50 mA (system + front display backlight + rear display backlight)
About 80 hours
Low Power Alarm
When the (
) symbol keeps flashing on the left down corner of the display, it need
charging.
The indicator will turn off automatically after 5 ~ 10 hours (approximately 1 ~ 2
hours with backlight on), when the low battery warning symbol shows up. The
indicator must be fully charged, before operating again.
When the low battery warning symbol shows up, please recharge the indicator
immediately for fear of weight instability.
01008043
5
ZSME100000091
EXCELL PRECISION CO., LTD.
Chapter 2 Keyboard Function
0 ~ 9 : Number key. Press the keys to input the numbers (0 ~ 9) and to set unit
price.
Press the key to clear the old unit price and then input the new one if you
:
CE
would like to change the unit price (If the unit price has been input for 3
seconds, you can input the new one immediately).
1T1 : Press the key to deduct the containers’ weight and the symbol “◄” in Weight
will appear.
1Z1 : Weight return to zero
1. 1 : Press this key one time, the DECIMAL POINT is available. Press this key
two times with number key 1, 2, 3 or 4, PRICING UNIT function is available.
00 : Press this key to enter “00”
Q’TY : When there is more than one piece of the same item, such as cans which
are priced by quantity, input the unit price first and then press Q’TY to enter
the number of items (input an integer no more than 999). The total amount
will be shown in TOTAL PRICE (as same as the calculator’s multiply). At that
moment, please press + to store it in accumulation.
1+1 : Input unit price in the UNIT PRICE, then press + to memorize the sum.
M+ : After the number on TOTAL PRICE is stable, press M+ to memorize the
sum.
MR : If there is accumulation data in memory, please press MR continually to
display the last 99 data.
MC : When there is accumulation data in memory (accumulation symbol “◄”
displays in TOTAL PRICE), press this key to clear all accumulation data, and
accumulation symbol “◄” disappears.
CH : Press CH , then total price disappears in TOTAL PRICE. Please press
the payment of customer, and the change displays in the UNIT PRICE.
or
.
00 depends on different model.
20key keyboard (0.
20key keyboard ( 00 )
)
7
8
9
QTY
M+
7
8
9
QTY
M+
4
5
6
+
MR
4
5
6
+
MR
1
2
3
CH
MC
1
2
3
CH
MC
0
.
CE
Z
T
0
00
CE
Z
T
01008043
6
ZSME100000091
EXCELL PRECISION CO., LTD.
Chapter 3 Operation Instruction
3-1 Internal Value Display Mode
Press
Z
key, when the display show “
” ,then, press
immediately. The display will show internal value. Press
0
CE
key
to exit the internal
value mode and return to the weighing mode.
3-2 Setting up Backlight Mode (option)
<Method 1>
” ,then press
Press Z key, the display will show “
away. It is “auto-backlight mode”.
Press Z key, the display will show “
away.
It is “backlight-off mode”.
”, then press
key right
4
5
key right
<Method 2>
Press 0 key for 2 seconds, the beeper will beep …three times.
The scale will change to backlight mode ⇒
“Auto-backlight mode” or “backlight-off mode”.
Auto-backlight mode
When there is a weight on the pan which weight is over 10d or pressing any keys,
the backlight will be on. After back to zero for 10 desonds (the weight is under
10d,), backlight will be off
The scale will keep the auto-backlight mode after the next bootup, if the
auto-backlight mode is set before last power-off.
3-3 Settings of Pricing Unit
n Selecting the pricing unit:
Double press
z3
key, the display will show the current pricing unit:
kg
kg 3
.
o Press 1 ~ 6 to select pricing units. The scale will be back to weighing & price mode.
The display will show the symbol indication “◄” for the request pricing unit.
1 ⇒ kg
2 ⇒ 100g
3 ⇒ HK catty
4 ⇒ tl.T
5 ⇒ lb
6 ⇒ oz
If the price unit “lb"is seleteced, the displaying will show three symbols “3".
If the price unit “oz"is selected, the displaying will not show any symbol “3".
01008043
7
ZSME100000091
EXCELL PRECISION CO., LTD.
3-4 External Weight Calibration
Steps:
1. Make sure the scale backs to zero and is in “kg” mode.
2. Press
“
MC
key and do not release, the then press
” , the weight display “ .
key to show
.
” kg .
3. Release two keys.
4. Key-in pre-calibration weight, the display will show “pre-calibration” of
weight value in flash.
Place full weight(s) on the pan.
When the scale is
stable, take off the weight(s) from the pan. The calibration finished.
3-5 External Weight Factory Default Setting
To Return to the factory setting, hold
MC
key and press
CE
key.
After buzzer beep sound, release two keys.
The scale will return to factory setting.
01008043
8
ZSME100000091
EXCELL PRECISION CO., LTD.
Chapter 4 RS232 Function Setting(option)
Press
MC
press
key do not release, and turn power on to enter function setting mode.
T
⇒
RS-232 Baud Rate
⇒
Transmission Mode ( RS-232 )
key to circulate selection function.
4-1 F1 ⇒ RS-232 Baud Rate
Weight
Using
kg
0,1,2,3
Unit Price
$/kg
Total Price
$
keys to choose 0,1,2,3 in order
0 ⇒ 9600 bits/second
1 ⇒ 4800 bits/second
2 ⇒ 2400 bits/second
3 ⇒ 1200 bits/second
Press
T
key to enter the next setting mode.
Press M+ key to save setting values. The scale will count backwards to zero
and back to weighing mode.
RS-232 Interface Format
I . Type: UART Signal of EIA-RS0232 C
II . Protocol:
1. Baud rate
2. Data bits
3. Parity bit
4. Stop bits
5. Code
Starting bit
01008043
: 1 200, 2 400, 4 800, 9 600 bits/second
: 8 bits
: None
: 1 bit
: ASCII
(American Standard Code for Informaiton Interchange)
Data bits
9
Ending bit
ZSME100000091
EXCELL PRECISION CO., LTD.
4-2 F2 ⇒ Transmission Mode ( RS-232 )
Weight
Unit Price
kg
Press number key
0 ⇒ Press
M+
and
$/kg
0,1,2,3,4,5,6,7,8
MC
Total Price
$
to choose 0,1,2,3,4,5,6,7,8 in order
key transmit RS232
1 ⇒ Continuous transmission (only RS-232)
2 ⇒ Stable transmission (only RS-232)
3 ⇒ RS-232 off
4 ⇒ Continious transmission (weight transmission only)
5 ⇒ Stable transmission (weight transmission only)
6 ⇒ Continuous transmission (printing format: +001.000)
7 ⇒ Stable transmission (printing format: +001.000)
8 ⇒ Command mode
Press
T
the next setting mode.
Press M+ to save setting values. The scale will count backwards to zero and
back to weight mode.
01008043
10
ZSME100000091
EXCELL PRECISION CO., LTD.
When F2 setting is “0 ”, the RS232 format is as below.
Press
Press
Press
M+
+
MC
to print
NO.
N
T
U/P
T/P
001
10.005kg
0.500kg
50/kg
30
NO.
QTY
U/P
T/P
002
20pcs
10/pcs
200
to print
to print
After pressing
CH ,input
proper amounts, press
MC key again to
print PAY and CHANGE
If necessary
25
TOTAL NUMBER 002
AMOUNT
700
PAY
1000
CHANGE
← When recalled the returned good,
it will print the total price.
Otherwise, it will not.
300
When F2 setting is “4 ” or “5”, the RS232 format is as below.
4 ⇒ Continious transmission (weight transmission only)
5 ⇒ Stable transmission (weight transmission only)
When current weight is 10KG, the format is as below.
10.000
(In stable transmission, it only output once. You need put it up again and the
scale will read next data)
10.000
10.000
10.000
When F2 setting is “8”, the command format is as below.
Input order ‘W’ in PC, the scale will reply the weight to PC, for example +004.000
01008043
11
ZSME100000091
EXCELL PRECISION CO., LTD.
RS232 DATA FORMAT
Stable transmission or Continuous transmission
(1) Weight unit is g.
1
6
7
HEAD
, HEAD
,
(2) Weight unit is kg/lb
±
1
2
3
2
4
3
5
4
5
6
8
9
10
7
8
9
10
, HEAD
,
±
(3) Weight unit is g, lb or oz.
2
HEAD
3
4
5
6
7
,
HEAD
,
±
12 13 14 15 16
DATA
HEAD
1
11
11
UNIT CR
12 13 14 15 16
DATA
UNIT
17
g
LF
17 18 kg/lb
CR
LF
9 10 11 12 13 14 15 16 17 18 19 20 21 twg
8
DATA
UNIT
CR
LF
(4) Weight unit is Catty.
1
2
3
4
5
6
7
HEAD
,
HEAD
,
±
8
HEAD1 ( 2 BYTES )
OL - Overload , Under load
ST Display is Stable
US Display is Unstable
9
10 11 12 13 14 15 16 17 18 19 20 Catty
DATA
UNIT
CR
LF
HEAD2 ( 2 BYTES )
NT GS -
NET Mode
GROSS Mode
DATA ( 7 or 8 BYTE )
2D ( HEX ) = “ – ” ( MINUS )
2B ( HEX ) = “ + “ (PLUS)
2E ( HEX ) = “ . ” ( DECIMAL POINT )
UNIT ( 2、3 or 4 BYTE )
kg
lb
tl.T
hkg
= 6B ( HEX )
= 6C ( HEX )
= 74 ( HEX )
= 68 ( HEX )
01008043
;
;
;
;
67 ( HEX )
62 ( HEX )
6C ( HEX ) ; 2E ( HEX ) ; 54 ( HEX )
6B ( HEX ) ; 67 ( HEX )
12
ZSME100000091
EXCELL PRECISION CO., LTD.
Example of Transmission:
Data format for RS-232 continuous transmission are as below.
1. The gross weight (+0.876 kg) shown as below, after stable: (under no tare or pre-tare
mode)
S T
,
G S
,
+ 0
0 0
.
8 7 6
k
g 0D 0A
HEAD
,
HEAD
,
DATA
UNIT
C
LF
2. The net weight (-1.568lb) shows as below, after unstable: (under tare or pre-tare mode)
U S
,
N T
,
0 0 1
.
5 6 8
l
b 0D 0A
HEAD
,
HEAD ,
DATA
UNIT
C
LF
3. The net weight (+15 TW Catty and 6.24 tl.T), after stable: (under tare or pre-tare mode)
S T , N T , + 1 5 . 0 6 . 2 4 t
l
. T 0D 0A
HEAD
,
HEAD
,
DATA
UNIT
C
LF
4. The net weight (+15 Catty and 6.24 HK Catty), after stable: (under tare or pre-tare
mode)
S T , N T , + 1 5 . 0 6 . 2 4 h k g 0D 0A
HEAD
,
01008043
HEAD
,
DATA
13
UNIT
C
LF
ZSME100000091
EXCELL PRECISION CO., LTD.
Appendix: 7-Segment Display Characters
Number
Display
Letter
Display
Letter
0
A
N
1
B
O
2
C
P
3
D
Q
4
E
R
5
F
S
6
G
T
7
H
U
8
I
V
9
J
W
K
X
L
Y
M
Z
℃
01008043
14
Display
ZSME100000091
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement