Produktinformation  Essential
Produktinformation
Essential
Manual turntable with fitted cartridge
Ortofon OMB 3E
Turntable
Chassis available in red, white and black
A quiet running synchronous motor with a two-step pulley drives the platter's outside edge via a silicon belt.
The particle board plinth stands on three feet which act as shock absorbers.
The resonance-optimised platter is made of particle board and a felt mat.
A chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6up
The turntable is supplied with Ortofon OMB 3E MM-cartridge fitted.
The headshell and undamped armtube are fashioned from a single piece.
The uni pivot bearings consist of a hardened steel point bearing and a hardened and polished steel pad.
Eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing
warped records.
The counterweight supplied is suitable for cartridges weighing between 4 - 9g
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.
Dimensions W x H x D: With dust cover closed 415 x 112 x 335mm, dust cover open 415 x 365 x 390mm.
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 1.6.10
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement