Multiquip Mikasa MVH-306DS2 Plate Compactor Operation and Parts Manual

OPERATION AND PARTS MANUAL

SERIES

MODEL MVH-306DS2

REVERSIBLE PLATE COMPACTOR

(YANMAR L70V6GJ1R1AAS5 DIESEL ENGINE)

Revision #2 (08/15/07)

To find the latest revision of this publication, visit our website at: www.multiquip.com

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

MVH-306DS2 PLATE COMPACTOR — PROPOSITION 65 WARNING

PAGE 2 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

NOTES

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 3

TABLE OF CONTENTS

MIKASA MVH-306DS2

REVERSIBLE PLATE

COMPACTOR

Proposition 65 Warning ..............................................2

Table Of Contents ......................................................4

Parts Ordering Procedures ........................................5

Safety Message Alert Symbols .............................. 6-7

Rules for Safe Operation ....................................... 8-9

Operation and Safety Decals ...................................10

Specifications ...........................................................11

Dimensions ..............................................................12

Features ...................................................................13

Plate Compactor Components .................................14

Engine Components ................................................15

Pre-Inspection .................................................... 16-17

Operation ........................................................... 18-21

Maintenance ...................................................... 22-25

Troubleshooting (Engine) .........................................26

Troubleshooting (Compactor) ..................................27

YANMAR L70V6GJ1R1AAS5

ENGINE

Cylinder Block Assembly .................................... 50-51

Cylinder Head Assembly .................................... 52-53

Air Cleaner Assembly......................................... 54-55

Muffler Assembly ............................................... 56-57

Crankshaft and Camshaft Assembly ................. 58-59

Piston Assembly ................................................. 60-61

Lub. Oil Pump and Governor Assembly ............. 62-63

Cooling and Starting Device Assembly .............. 64-65

Fuel Injection Pump Assembly ........................... 66-67

Fuel Tank and Fuel Line Assembly .................... 68-69

Starting Motor and Dynamo Assembly .............. 70-71

Tools, Labels and Gasket Set Assembly............ 72-73

Terms and Conditions Of Sale — Parts .................. 74

PARTS ILLUSTRATIONS

Explanation Of Code In Remarks Column ...............28

Suggested Spare Parts ............................................29

Nameplate and Decals....................................... 30-31

Vibrating Plate Assembly ................................... 32-33

Base and Engine Assembly ............................... 34-37

Vibrator Assembly .............................................. 38-39

Control Handle Assembly .................................. 40-43

Hand Pump Assembly........................................ 44-45

Battery Assembly ............................................... 46-47

Electric Device.................................................... 48-49

Specification and part number are subject to change without notice

.

PAGE 4 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 PLATE COMPACTOR — SAFETY MESSAGE ALERT SYMBOLS

FOR YOUR SAFETY AND THE SAFETY OF OTHERS!

Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and

Operating Instructions could result in injury to yourself and others.

This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip

Model MVH-306DS2 Reversible Plate

Compactor.

Potential hazards associated with the operation of an

MVH-306DS2 Reversible Plate Compactor will be referenced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunction with Safety

Message Alert Symbols.

HAZARD SYMBOLS

WARNING - Lethal Exhaust Gases

Engine exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. NEVER operate this equipment in a confined area or enclosed structure that does not provide ample free flow air.

Refer to the engine manufacturer’s instructions for data relative to its safe operation.

Before using this reversible plate compactor, ensure that the operating individual has read and understands all instructions in this manual.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The

Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words:

DANGER, WARNING, or CAUTION.

WARNING - Explosive Fuel

Diesel fuel is extremely flammable, and its vapors can cause an explosion if ignited.

DO NOT start the engine near spilled fuel or combustible fluids.

DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in approved containers, in well-ventilated areas and away from sparks and flames.

You WILL be KILLED or SERIOUSLY INJURED if you DO NOT follow these directions.

You CAN be KILLED or SERIOUSLY INJURED if you DO NOT follow these directions.

WARNING - Burn Hazards

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operations. Never operate the engine with heat shields or heat guards removed.

CAUTION - Respiratory Hazard

ALWAYS wear approved respiratory protection when required.

You CAN be INJURED if you DO NOT follow these directions.

PAGE 6 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 PLATE COMPACTOR — SAFETY MESSAGE ALERT SYMBOLS

CAUTION - Rotating Parts

NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.

CAUTION - Equipment Damage Messages

Other important messages are provided throughout this manual to help prevent damage to your compactor, other property, or the surrounding environment.

CAUTION - Accidental Starting

ALWAYS place the ON/OFF switch in the OFF position, when the compactor is not in use.

This reversible plate compactor, other property, or the surrounding environment could be damaged if you do not follow instructions.

CAUTION - Sight and Hearing Hazards

ALWAYS wear approved eye and hearing protection.

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 7

MVH-306DS2 PLATE COMPACTOR — RULES FOR SAFE OPERATION

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

■ NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing engine or plate compactor.

The following safety guidelines should always be used when operating the compactor:

GENERAL SAFETY

■ DO NOT operate or service this equipment before reading this entire manual.

■ This equipment should not be operated by persons under 18 years of age.

■ NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

■ High Temperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot components can cause serious burns.

■ The engine of this compactor requires an adequate free flow of cooling air.

NEVER! operate the compactor in any enclosed or narrow area where free flow of the air is restricted. If the air flow is restricted it will cause serious damage to the compactor or engine and may cause injury to people and proper ty.

Remember the engine gives off DEADLY gases.

■ NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.

■ NEVER operate this equipment under the influence or drugs or alcohol.

■ Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

■ ALWAYS check the machine for loosened threads or bolts before starting.

■ ALWAYS wear proper respiratory (mask) hearing and eye protection equipment when operating the compactor.

■ ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

■ ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool.

DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

■ NEVER operate the equipment in an

explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm

or even death.

■ Topping-off to filler port is dangerous, as it tends to spill fuel.

■

Refer to the Engine Owner's Manual for engine technical questions or information.

■ NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

■ Manufacturer does not assume responsibility for any accident due to equipment modifications.

PAGE 8 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 PLATE COMPACTOR — RULES FOR SAFE OPERATION

Loading and Unloading (Crane):

■ Before lifting, make sure that machine parts (hook and vibration insulator) are not damaged and screws are not loosened or lost.

■ Always make sure crane or lifting device has been properly secured to the hook of guard frame on compactor.

■ NEVER lift the machine while the engine is running.

■ Use adequate lifting cable (wire or rope) of sufficient strength.

■ Use one point suspension hook and lift straight upwards.

■ NEVER allow any person or animal to stand underneath the machine while lifting.

■ Try not to lift machine to unnecessary heights.

TRANSPORTING

■ ALWAYS shutdown engine before transporting.

■ Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

■ Drain fuel when transporting compactor over long distances or bad roads.

■ ALWAYS tie down the compactor during transportation by securing the compactor's guard frame with rope.

Maintenance Safety:

■ NEVER lubricate components or attempt service on a running machine.

■

ALWAYS allow the machine a proper amount of time to cool before servicing.

■ Keep the machinery in proper running condition.

■ Fix damage to the machine immediately and always replace broken parts.

■ Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

■ DO NOT use food or plastic containers to dispose of hazardous waste.

■ DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.

Emergencies

■

ALWAYS know the location of the nearest fire extinguisher.

■

ALWAYS know the location of the nearest first aid kit.

■

In emergencies always know the location of the nearest phone or keep a phone on the job site.

Also know the phone numbers of the nearest

ambulance, doctor and fire department. This information will be invaluable in case of an emergency.

MVH-200DA2

Figure 18. Lifting the Compactor

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 9

MVH-306DS2 — OPERATION AND SAFETY DECALS

Figure 2 displays the operation and safety decals as they appear on the reversible plate compactor. Should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set.

Figure 2. Operation and Safety Decals

PAGE 10 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 —SPECIFICATIONS

C e n t r fi u g a l F o r c e

T a b l e 1 .

M V H 3 0 6 D S

C o m p a c t o r S

2 R p e c i f e v e r s i b l i c a t i o n s e P l a t e

1 0 , 1 2 5 l b s .

( 4 , 5 9 3 k g )

V i b r a it o n F r e q u e n c y

T r a v e il n g S p e e d

P l a t e S i z e ( L x W )

E x t e r n a l P l a t e S i z e ( L x W )

M a x .

A r e a o f C o m p a c it o n ( n o e x t e n s i o n s )

O v e r a ll L e n g t h

O v e r a ll W i d t h

O v e r a ll H e i g h t ( w ti h h a n d l e )

O v e r a ll H e i g h t ( w ti h o u t h a n d l e )

O p e r a it n g W e i g h t

O p e r a it n g W e i g h t ( e x t e n s i o n p l a t e s )

L u b r i c a it n g O li i n V i b r a it o n C a s e

4 , 4 0 0 v p m ( 7 0 H z )

0 t o 7 5 f /t m i n ( 0 t o 2 3 m / m i n )

1 8 x 3 4 i n ( 4 5 .

7 2 x 8 6 .

3 6 c m )

2 4 x 3 4 i n ( 6 0 .

9 6 x 8 6 .

3 6 c m )

6 , 7 5 0 s q .

f .t

( 2 , 0 5 7 s q .

m e t e r s )

6 1 .

8 i n ( 1 5 7 0 m m )

1 8 .

0 i n ( 4 5 7 m m )

4 4 .

1 i n ( 1 1 2 0 m m )

3 1 .

7 i n ( 8 0 5 m m )

6 9 2 l b s .

( 3 1 3 k g .

)

7 2 5 l b s .

( 3 2 8 k g .

)

5 0 .

7 f .l

o z .

( 1 5 0 0 c c )

E n g i n e M a k e

E n g i n e M o d e l

E n g i n e T y p e

C y il n d e r B o r e X S t r o k e

D i s p l a c e m e n t

M a x i m u m O u p u t

F u e l T a n k C a p a c ti y

O li C a p a c ti y

S t a r it n g M e t h o d D / D S

D r y N e t W e i g h t R e c o i /l E l e c t r i c

D i m e n s i o n s ( L x W x H )

T A B L E 2 .

E N G I N E S P E C I F I C A T I O N S

Y A N M A R

L 7 0 V 6 G J 1 R 1 A A S 5

A ri c o o l e d 4 c y c l e D i e s e l E n g i n e

3 .

0 7 x 2 .

5 1 i n ( 7 8 x 6 4 m m )

1 0 .

3 4 lf o z ( 3 0 6 c m 3 )

6 .

5 H P @ 3 , 6 0 0 R P M

3 .

5 q u a r t s ( 3 .

3 1 l ti e r s )

1 .

1 6 q u a r t s ( 1 .

1 0 l ti e r s )

R e c o i /l E l e c t r i c

7 2 .

7 5 l b s .

( 3 3 k g ) / 8 3 .

7 7 l b s .

( 3 8 k g )

1 5 .

1 1 x 1 6 .

5 7 x 1 7 .

7 1 i n ( 3 8 4 x 4 2 1 x 4 5 0 m m )

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 11

MVH-306DS2 — DIMENSIONS

Figure 3. MVH-306DS2 Reversible Plate Compactor Dimensions

C

D

E

R E F .

A

B

T A B L E 3 .

D I M E N S I O N S

D I M E N S I O N S

5 3 i n .

( 1 3 4 .

6 c m .

)

1 8 i n .

( 4 6 c m .

)

3 4 i n .

( 8 6 c m .

)

6 3 .

8 i n .

( 1 6 2 c m .

)

3 2 .

5 i n .

( 8 2 .

5 c m .

)

PAGE 12 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2— FEATURES

Plate Compactor

The Mikasa MVH-306DS2 is a walk behind, reversible plate compactor designed for the compaction of sand, clay and asphalt. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.

Vibratory Plates

The vibratory plates of the MVH-306DS2 produce low amplitude high frequency vibrations, designed to compact granular soils.

The resulting vibrations cause forward motion. The engine and handle are vibration isolated from the vibrating plate. The heavier the plate, the more compaction force it generates.

Reversible Vibratory Plates

Reversible vibratory plates have two eccentric weights that allow a smooth transition for forward and reverse travel, plus increased compaction force as the result of dual weights.

Due to their weight and force, reversible plates are ideal for semi-cohesive soils.

Frequency/Speed

The compactor's vibrating plate maximum frequency is 4400 vpm (vibrations per minute). The forward and reverse travel speed of the compactor is approximately 75 ft./minute (23 meters/ minute).

Engine

The Mikasa MVH-306DS2 Plate Compactor is equipped with a

YANMAR L70V6GJ1R1AAS5 ENGINE diesel engine.

Controls

Before starting the MVH-306DS2 Plate Compactor, identify and understand the function of the controls and components.

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 13

MVH-306DS2— PLATE COMPACTOR COMPONENTS

Figure 4. MVH-306DS2 Reversible Plate

Compactor Components

Figure 4 illustrates the location of the major components for the

MVH-306DS2 Reversible Plate Compactor. The function of each component is described below:

1. Hand Grip – When operating the compactor use this hand

2. Forward & Reverse Lever – Push the lever forward, the compactor will move in a forward direction, pull the lever

3. Handle Bar – When operating the compactor, this handle

4.

5.

6.

7.

grip to maneuver the compactor.

backwards, the compactor will move in backwards direction.

Placing the lever in the middle (midway) will cause the compactor not to move (neutral).

is to be in the downward position. When the compactor is to be stored, move the handle bar to the upright position.

Guard Hook - Used to lift the machine with crane or other lifting device.

Stopper - Locks the handle in place in the upward position for stowing.

Engine – This plate compactor uses a YANMAR L-70V6 diesel engine. Refer to the owner’s manual for engine information and related topics.

Battery (Option) - This unit uses a 12-volt battery. See maintenance of this manual for proper care of battery.

8. Belt Cover – Remove this cover to gain access to the Vbelts. NEVER run the compactor without the V-belt cover. If the V-belt cover is not installed, the possibility exist that your hand may get caught between the V-belt and clutch, thus causing serious injury and bodily harm.

9. Base Plate – Designed to compact sand, clay, and asphalt.

10. Oil Reservoir – Fill with Shell Tellus Oil 46 or equivalent grade hydraulic oil.

11. Vibration Case – Encloses the eccentric, gears and counter weights.

12. Hydraulic Cylinder – Activated by moving the travel lever.

The cylinder controls the direction of movement by the plate compactor.

13. Shock Absorber – Protects plate compactor from damage by absorbing vibration during operation.

14. Throttle Lever – Controls speed of the plate compactor.

Place straight vertically to start, push fully counterclockwise for full throttle and fully clockwise to stop plate compactor.

14. Ignition Switch (Option) – Provided for electric start models only

PAGE 14 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2— ENGINE COMPONENTS

1.

2.

Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tighten securely.

DO NOT over fill.

Fuel Tank – Capacity is 3.5 quarts (3.31 liters) of diesel fuel.

Figure 5. MVH-306DS2 Engine Components

ENGINE COMPONENTS

Figure 5 illustrates the location of the major lever components of the engine. Each component is described below:

6.

Recoil Starter– Manual-starting method. Pull the starter grip until resistance is felt, then pull briskly and smoothly.

7.

Oil Filler Cap / Dipstick – Remove this cap to add oil to the engine crankcase. Read dipstick to determine if oil level is low. DO NOT over fill.

8.

Oil Drain Plug – Unscrew plug to drain oil from engine crankcase. Dispose of oil in a safe manner.

3.

4.

5.

Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

Muffler – Used to reduce noise and emissions.

Recoil Starting Handle (pull rope) – Type of engine starting method. Alternate type would be electric start

(ignition key).

9.

Decompression Lever– Press down before starting engine. To prevent damage to engine, DO NOT use for any other purpose.

10. Fuel Cock– Controls the flow of diesel fuel to the carburetor.

Must be in the ON position when starting and running the engine.

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 15

CAUTION

NEVER operate the compactor in a confined area or enclosed area structure that does not provide ample free flow of air.

MVH-306DS2 — PRE-INSPECTION

4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Maximum oil capacity is 1.16 quarts (1.10 liters).

ALWAYS wear approved eye and hearing protection before operating the compactor.

Before Starting

1.

Read safety instructions at the beginning of manual.

2.

Familiarize yourself with the operating and control elements of the machine and the working environment. This includes obstacles in the working area, bearing capacity of the ground and the necessary safety provisions.

3.

Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required.

4.

Check fastening nuts and bolts for tightness. Loose threads may cause damage to the machine when vibrating.

5. Understand the geographical features and regulations of the job site.

6.

Clean the compactor, removing dirt and dust. Particularly, the bottom of the plate, engine cooling air inlet.

S e a s o n

S u m m e r

S p r i n g / F a ll

W i n t e r

Figure 7. Engine Oil Level

T a b l e 4 .

O li T y p e

T e m p e r a t u r e

2 5 ° C o r H i g h e r

2 5 ° C ~ 1 0 ° C

0 ° C o r L o w e r

O li T y p e

S A E 1 0 W 3 0

S A E 1 0 W 3 0 / 2 0

S A E 1 0 W 1 0

Checking Engine Oil Level

1.

To check the engine oil level, place the compactor on secure level ground with the engine stopped.

2.

Remove the dipstick from the engine oil filler hole (Figure 6) and wipe it clean.

3.

Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.

Checking the Hydraulic Oil Level

1.

To check the engine oil level, place the compactor on secure level ground with the engine stopped.

2.

Remove the hydraulic oil breather cap located at the top of the hydraulic oil tank (Figure 8).

3.

Using a 24 mm wrench, remove the hydraulic oil filler plug.

3.

Visually inspect to determine if hydraulic oil level is low. If oil level is low add Shell Tellus 46 hydraulic oil or equivalent through the hand pump oil filler port.

Figure 6. Engine Oil Dipstick Removal Figure 8. Hydraulic Oil Filler Plug Removal

PAGE 16 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — PRE-INSPECTION

CAUTION Explosive Fuel

DO NOT overfill hydraulic oil tank. This could cause oil leaks and sluggish operation. Clean cap and surrounding area before opening to prevent dirt from entering oil tank.

DANGER

4.

When adding hydraulic oil, only fill to the specified oil level as marked on the front of the hydraulic oil tank (Figure 9). DO

NOT overfill

Diesel fuel is highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the compactor if the engine is hot! or running.

Checking The Fuel

1. Remove the fuel cap located on top of fuel tank.

2. Visually inspect to see if fuel level is low. If fuel is low, replenish with diesel fuel (Figure 12).

3. When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. Wipe up any spilled fuel.

Figure 9. Oil Tank (Front View)

Checking the Air Cleaner

1.

To check the engine oil level, place the compactor on secure level ground with the engine stopped.

2.

Loosen the wing nut (Figure 10), remove the air cleaner cover.

Figure 12. Refueling

DANGER

Fuel spillage on a hot engine can cause a fire or explosion.

If fuel spillage occurs, wipe up the spilled fuel completely to prevent fire hazards. NEVER! smoke around or near the compactor.

Figure 10. Air Cleaner Element

3.

Remove the air cleaner element (Figure 11) and inspect it for signs of wear or dirt. If air cleaner element is dirty, clean or replace element.

Figure 11. Air Cleaner Element

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 17

MVH-306DS2 — OPERATION

CAUTION

DO NOT attempt to operate the compactor until the Safety, General Information and

Inspection sections of this manual have been read and thoroughly understood.

This section is intended to assist the operator with the initial start-up of the compactor. It is extremely important that this section be read carefully before attempting to use the compactor in the field.

Figure 14. Handle Adjustment

Refer to Figure 3 for the location of controls and components.

Releasing the Handle

1. Pull the handle release pin, (Figure 13) then push down on the hand grip to release the handle.

STARTING THE ENGINE

Electric Start (Option)

1.

Open the fuel cock (Figure 15).

Figure 15. Open Fuel Cock

2.

Place the throttle lever (Figure 16) in the START position

(center). Place the travel lever in the neutral position

(center)

Figure 13. Handle Release Pin

Adjusting Handle Height

The height of the handle is adjustable for your comfort .

1. Loosen the butterfly screw (Figure 14).

2. Turn the grip clockwise to raise the handle or counterclockwise to lower the handle.

3. When the handle is raised to the desired height, tighten the butterfly screw.

Figure 16. Travel/Throttle Lever (Start Positions)

3.

Insert the ignition key into the ignition switch and turn it to the RUN position (Figure 17). The buzzer should sound at this time.

4.

Turn the ignition key further to the right to the START position to start the engine. Buzzer stops sounding and the engine starts.

PAGE 18 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — OPERATION

5.

If the engine fails to start, DO NOT continue to rotate the ignition key for more than 5 seconds. Return the key to the

RUN position and wait 10 seconds before starting again

Figure 17. Starter Switch (Option)

Figure 18. Engine Start Handle

4.

Push down decompression lever (Figure 19) and release.

CAUTION

While the engine is running, never try to turn the ignition key to the START position.

6.

After starting the engine, continue to warm up the engine for about 3 to 10 seconds especially in cold weather.

7.

If the buzzer does not stop sounding after the engine has started, shutdown engine immediately and check engine oil level. The buzzer functions as a engine oil level alarm warning device.

Figure 19. Decompression Lever

5.

If the engine does not start, repeat steps 4 and 5.

TRAVELING

When starting a unit with an electric start capability, a decompressor is not normally required.

However, when ambient temperature or battery charger level is low, use of a decompressor will help make the start-up easier.

CAUTION

Make sure to follow all safety rules referenced in the safety section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause damage to the compactor or bodily harm.

1. Grasp the compactor's hand grip (Figure 20), and move the engine throttle lever (Figure 20) quickly to the fast position.

2. With the throttle lever in the fast position, the engine speed should be around 3,600 RPM, therefore engaging the centrifugal clutch

Recoil Start

1.

Open the fuel cock (Figure 15).

2.

Move the throttle lever to the START position (Figure 16).

3.

Grasp the starter grip (Figure 18) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting.

Figure 20. Throttle Lever (Fast)

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 19

ALWAYS move the throttle lever quickly without hesitation, because increasing the engine speed slowly causes the clutch to slip.

3. To make the compactor move in the forward direction push the travel lever ( Figure 21) forward.

MVH-306DS2—OPERATION

Figure 22. Throttle Lever (Stop)

Figure 23. Starter Switch (STOP)

Figure 21. Travel Lever

4. To make the compactor move in the reverse direction pull the travel lever ( Figure 21) backwards.

5. Firmly gasp the compactor's hand grip, the compactor will begin moving in the desired position when the direction lever has been placed in the desired position.

6. Slowly walk behind the compactor and be on the lookout for any large objects or foreign matter that might cause damage to the compactor or bodily injury.

7. If travel lever is placed in the neutral position, the machine will vibrate in place.

8. To move the compactor laterally, hold the hand grip firmly and swing compactor. DO NOT swing compactor while gripping the travel lever.

Emergency Shutdown

1. For a recoil start type engine, move the throttle lever quickly to the STOP position.

2. For a electric start type engine, place the engine IGNITION switch in the OFF position.

STOWING THE HANDLE

1.

Push up the handle upward (Figure 24) until the handle locks in place.

Normal Shutdown

1.

Return the throttle lever to the START position (Figure 16).

Allow the machine to cool down for 2 to 3 minutes.

2.

Place the travel lever in the NEUTRAL position.

3.

Place the throttle lever in the STOP position (Figure 22) to stop the engine. If using an electric start unit, return the key switch to the STOP position (Figure 23) as soon as the engine stops.

4.

Close the fuel cock (Figure 15).

Figure 24. Stowing the Handle

PAGE 20 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — MAINTENANCE

CAUTION

Inspection and other services should always be carried out on hard and level ground with the engine shutdown.

CAUTION

Fuel piping and connections should be replaced every 2 years.

T A B L E 6 .

M V H 3 0 6 D S 2 E N G I N E C H E C K

Inspection and Maintenance Service Tables.

1. To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7.

I T E M H O U R S O F O P E R A T I O N

O li o r F u e l L e a k E v e r y 8 h o u r s ( e v e r y d a y )

T i g h t n e s s

T h r e a d s o f F a s t e n i n g

E v e r y 8 h o u r s ( e v e r y d a y )

T A B L E 5 .

M V H 3 0 6 D S 2 M A C H I N E I N S P E C T I O N

I T E M

L o o s e o r M i s s i n g S c r e w s

H O U R S O F O P E R A T I O N

E v e r y 8 h o u r s ( e v e r y d a y )

E n g i n e O li C h e c k

R e p l e n i s h m e n t a n d

E n g i n e O li R e p l a c e m e n t

E v

( R e r y e p l e

8 n i h o u r s s h t o

( e v e r y d s p e c i if e d a y m

) a x i m u m l e v e )l

A tf e r f ri s t

1 0 0 h o u r s

2 5 h o u r s t h e n e v e r y 5 0 t o

D a m a g e d P a tr s E v e r y 8 h o u r s ( e v e r y d a y )

A ri F i tl e r C l e a n i n g E v e r y 1 0 0 h o u r s

F u n c it o n

P a tr o f C o n rt o ill n g S y s t e m

E v e r y 8 h o u r s ( e v e r y d a y ) S e e s e p a r a t e e n g i n e m a n u a l f o r d e t a li s o n e n g i n e c h e c k .

H y d r a u il c S y s t e m L e a k

V i b r a t o r O li C h e c k

V i b r a t o r O li R e p l a c e m e n t

H y d r a u il c O li C h e c k

H y d r a u il c O li R e p l a c e m e n t

V b e tl ( c l u t c h ) C h e c k

B a tt e r y C h e c k

E v e r y 1 0 0 h o u r s

E v e r y 1 0 0 h o u r s

E v e r y 3 0 0 h o u r s

E v e r y 1 0 0 h o u r s

F ri s t t h e n a tf e r e v e r y

2 0 0

1 , 0 0 h

0 o u r s , h o u r s

E v e r y 2 0 0 h o u r s

E v e r y 1 0 0 h o u r s

CAUTION

These inspection intervals are for operation under normal conditions. Adjust your inspection intervals based on the number hours plate compactor is in use, and particular working conditions.

Daily Service z Check for leakage of fuel or oil.

z Check for loose screws including tightness. See Table 7 below (tightening torque ), for retightening:

T A B L E 7 .

T I G H T E N I N G T O R Q U E ( i n .

k g / c m ) D i a m e t e r

M a t e r i a l 6 m m 8 m m 1 0 m m 1 2 m m

4 T

6 8 T

1 1 T

7

1

1

0

0

5

0

0

1

2

5

5

0

0

3

5

0

0

0

0

5

8

0

0

0

0

* 1 0 0

4 0 0 8 0 0

3 0 0 ~

3 5 0

6 5 0 ~

7 0 0

1 , 2 0 0

1 4 m m

7 5 0

1 , 3 0 0

2 , 0 0 0

1 6 m m

1

2

2

,

,

,

1

0

9

0

0

0

0

0

0

1

1

2

4 ,

,

,

8

4

7

2 m

0

0

0 m

0

0

0

* ( I n c a s

( T h r e a d s e i n c o u n t e r p a r t u s e w ti h t h i i s s

M a t e r i a l a n d q u a l ti y o f m a o m t f e a r i a l u m i n u m ) c a h l i i n s e a r e a ll m a r k e d r i g h t o n h a n e a c h d e d ) b o l ,t a n d s c r e w .

2 0 m m

2

3

5 ,

,

,

0

8

6

0

0

0

0

0

0 z Remove soil and clean the bottom of compaction plate.

z

Check hand pump, piping and hose for any leakage. A loosened hydraulic hose can be a cause for leakage. Check hydraulic hose connections with wrench applied for tightness.

z

Check engine oil.

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 21

MVH-306DS2 — MAINTENANCE

Engine Oil Replacement:

1. Replace engine oil, in first 25 hours of operation and every

50 to 100 hours afterwards.

2. Oil may be drained more easily when it is warm after operation (For more details, see separate engine Owner's

Manual).

Air Filter (Every 6 Months or 400 Hours)

1. The air filter element should be cleaned because a clogged air cleaner can cause poor engine starting, lack of power and shorten engine life substantially.

Figure 25. Engine Air Filter and Element

2. To clean or replace air filter loosen the wing nut on the air filter housing (Figure 25) remove the cover and take out air filter cartridge. If only cleaning of the air filter is desired blow through the air filter cartridge from the inside, moving a jet of dry compressed air up and down until all dust is removed.

CAUTION

NEVER attempt to check the V-belt with the engine running.

Severe injury can occur if your hand gets caught between the Vbelt and the clutch (Figure 26). Always use safety gloves.

CLUTCH

PULLEY

Figure 27. V-Belt Check z

Replacing the V-belt

Remove the belt cover. Engage an offset wrench 3/4”(19 mm) or the like to vibrator pulley (lower) fastening bolt. Engage waste cloth or the like at midway of V-belt on the left side and while pulling it back strongly, rotate the offset wrench clockwise so that the V-belt will come off.

z

Reinstalling the V-belt

Engage V-belt to lower vibrator pulley and push the V-belt to left side of upper clutch and, in the same manner as in removal, rotate offset wrench clockwise so that the V-belt goes back on.

z

Checking Clutch

Check the clutch simultaneously with V-belt checking. With belt cover removed, check outer drum of the clutch for seizure and

"V" groove for wear or damage with your eyes. Clean the "V" groove as necessary. If the shoe is worn, power transmission becomes deficient and slipping will result.

z

Replacing Clutch

Remove V-belt. Remove bolt at engine power output by giving a light tap with a hammer to an engaged wrench and rotate bolt counterclockwise. Remove clutch with a pulley extractor. To reinstall, reverse the procedure.

CAUTION

VIBRATOR

PULLEY

Figure 26 V-Belt Hazard

Checking and Replacing the V-Belt and Clutch

1. After 200 hours of operation, remove the belt cover to check the V-belt tension (Figure 27). Tension is proper if the belt bends about 3/8”(10 mm) when depressed strongly with finger between shafts. Loose or worn V-belts reduces power transmission efficiency, causing weak compaction and reduces the life of the belt itself.

Whenever the compactor's vibration becomes weak or lost during normal operation regardless of operation hours, check the V-belt and clutch immediately.

PAGE 22 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2—MAINTENANCE

Vibrator Oil Level Check 2. Push the travel lever back and forth to drain the hydraulic oil from the hand pump (hydraulic oil reservoir).

CAUTION

Always clean the area around the vibrator oil level check plug before removing oil check plug. This will prevent dirt and debris from entering the system.

1. In every 100 hours of operation, with the machine positioned horizontally, use a 3/4” (19 mm) wrench and remove vibrator oil level check plug (Figure 28). Visually inspect and see if vibrator oil level is up to filler port. Be sure to clean area around check hole to prevent dirt and dust from entering.

Figure 29. Hydraulic Oil Cylinder/Hose

3. After draining hydraulic oil, reconnect hydraulic oil hose to cylinder.

4. Place handle in upright position. Pull travel lever all the way back (reverse), and using a rope, secure travel lever to hand grip.

Adding Hydraulic Oil

1. Remove the breather cap and oil plug (Figure 30) from the hydraulic oil tank using a 24mm hex socket.

Figure 28. Vibrator Oil Drain and Check Plugs

Draining Vibrator Oil

1. Replace vibrator oil after first 200 hours and in every 1,000 hours of operation.

2. Position handle bar vertically (storage position).

3. Using a 14 mm wrench remove the vibrator oil drain plug

(Figure 28) from the vibrating plate assembly.

For draining oil through level check hole, have the machine inclined with a sleeper or the like placed under the compaction plate on opposite side.

Figure 30. Hydraulic Oil Tank

2. Using a funnel, add Shell Tellus Oil #46 or equivalent to the hydraulic oil tank through the oil filler port (Figure 31). Oil tank capacity is 50.7 fl. oz (1500 cc)

4. After hydraulic oil has been completely drained from machine, fill with 10W-30 motor oil to the appropriate safe operating level (Figure 28)

5. Reinstall drain plug into vibrating plate assembly. Apply seal tape or Loctite #575 to thread portion of drain plug.

Draining Hydraulic Oil

1. Disconnect the hydraulic hose (Figure 29) connected to the hydraulic oil cylinder.

Figure 31. Hydraulic Oil Maintenance

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 23

MVH-306DS2 — MAINTENANCE

CAUTION

Make sure hydraulic oil is at a normal safe operating level. DO

NOT over fill. Over filling (excessive oil) will cause excess oil to blow out of bleeder plug.

3. Loosen bleeder plug located at top of hydraulic cylinder on side of vibrator (Figure 32). Air remaining in the circuit will be forced out of the bleeder plug. Once all air has been purged from the hydraulic system, tighten bleeder plug securely

4. Reinsert oil plug into hydraulic oil tank and tighten securely.

Reinstall breather cap.

CAUTION

The bleeder plug should only be loosened, but not removed.

z Always wear eye protection and rubber gloves, since the battery contains sulfuric acid which burns skin and eats through clothing. In case of contact, flush thoroughly with water and contact a doctor immediately.

z Use wire brush or sand paper to clean the battery terminals.

z Always check battery for cracks or any other damage. If white pattern appears inside the battery or paste has accumulated at the bottom, replace the battery.

z If the compactor will not be in operation for a long period of time, store in cool dry place and check the battery charge level every month to maintain the performance of the battery.

z Check the battery regularly and make sure that each electrolyte level is to the bottom of the vent well

(Figure 33). If necessary add only distilled water in a wellventilated area.

CAUTION

Wear safety glasses or face mask, protective

clothes, and rubber gloves when working with battery.

z The battery electrolyte contains sulfuric acid, be careful not to let the battery electrolyte come in contact with your body or clothing.

z Always check the battery terminals periodically to ensure that they are in good condition.

Figure 33. Battery Electrolyte Levels

Figure 32. Bleeder Plug

BATTERY MAINTENANCE (Option)

Mishandling of the battery shortens the service life of the battery and adds to maintenance cost. When handling the battery do the following:

BATTERY CHARGING z DO NOT charge battery with the battery cables connected to the compactor. The diodes will be damage by the high voltage.

z Batteries generate hydrogen gas which can be highly explosive. DO NOT smoke or allow flames or sparks near the battery, especially during charging of the battery.

z Charge the battery in a open air environment (plenty of ventilation).

z Before charging , remove the cap from each cell of the battery.

z Connect the positive (+) lead of the charger to the positive

(+) terminal of the battery and the negative (-) lead of the charger to the negative (-) terminal of the battery. DO NOT reverse the polarity when charging. Reverse polarity will damage the charger rectifier or the battery.

PAGE 24 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — MAINTENANCE

z Battery fluid will be lost through continuous charging and discharging.

z Discontinue charging if the electrolyte temperature exceeds

117

°°°°°

F (45

°°°°°

C)

During summer much more battery fluid is lost than in winter. Before starting check battery electrolyte levels, and replenish with distilled water to the upper mark on the battery.

LONG TERM STORAGE

When storing your compactor for long periods do the following: z Run the engine at idle speed for 3-5 minutes.

z Stop the engine. Drain the engine crankcase oil while the engine is still warm. Fill Engine crankcase with fresh oil.

z Remove the rubber plug (Figure 36) on the rocker arm cover and add about 2 cc of lube oil. Reinstall rubber plug.

BATTERY CABLE CONNECTION (Option)

1.

Take off the battery cover by removing the M6 nuts (Figure 32).

2.

When removing cable, disconnect the ground side (normally negative) first (Figure 34).

3.

When installing cable connect the ground side (normally negative) last.

Figure 36. Decompression Lever z For recoil type compactors, push the decompression down

(non-decompression position) and hold it while you pull the recoil starter grip (Figure 37) rope 2 or 3 times. DO NOT start the engine.

Figure 34. Battery Removal

CHECKING FUEL FILTER

1.

Clean the fuel filter (Figure 35) every 3 months or 200 hours.

2.

Replace fuel filter every 6 months or 400 hours.

3.

To clean the fuel filter, loosen the nuts of the fuel cock and pull out the filter from the F.O. tank filler port. Wash the filter thoroughly with diesel fuel oil.

4.

Reinstall fuel filter and connect all associated hardware.

Figure 37. Recoil Starter Grip z For electric start type compactors, turn the engine for 2 or 3 seconds with the decompression lever set in the nondecompression position, and the starter key at the START position. DO NOT start the engine.

z Pull the decompression lever up. Pull the recoil starter grip slowly. STOP when it feels tight. This closes the intake and exhaust valves (compression position) , and helps prevents ruts from forming.

z Wipe any oil or dirt that may have accumulated on the compactor.

z Store compactor in a cool dry place out of the reach of children or unauthorized personnel

Figure 35. Fuel Filter

Troubleshooting

See Tables 8 (engine) and 9 (plate compactor) on proceeding pages for engine and plate compactor troubleshooting guide.

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 25

MVH-306DS2 —TROUBLESHOOTING

Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 8) information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant.

E n g i n e d e l a y e d ,

S Y M w i a ll tl n o t h o u s g t a h r t e n o r g i n s e t a r t i s c a n b e t u r n e d o v e .r

P T O N

A t n o t l o w s t a r t e m p e r a t u r e s

.t

e n g i n e w i ll l

T A B L E 8 .

E N G I N E T R O U B L E S H O O T I N G

P O S S I B L E P R O B L E M

S p e e d c o n t r o l l e v e r i s

N o f u e l f u e l p u m p ?

i n " S T O P " r e a c h i n g i n j e c it o n p u m p ?

D e f e c it v e p o s i it o n ?

S O L U T I O N

S e t s p e e d c o n t r o l l e v e r t o " S T A R T " p o s i it o n .

A d d f u e .l

C h e c k e n t ri e f u e l s y s t e m .

R e p l a c e f u e l p u m p .

F u e l if tl e r c l o g g e d ?

F a u tl y f u e l s u p p l y il n e ?

C

F

O

L

F o o u o u li m e l w e l w e s s i j e c t p r e s t p r i n s t a r o n o s u r e it n s e p a r e m p e g r t t n t o o e m a t e s r a t u o o t o h l w o r l o p e r a a s r e s ?

o w k i n g w ?

i n

?

t u r e c o a d e q il r r e c m ti u a t e e x lt y ?

c e r e e d s i s t e d a n c e t o

R e p l a c e f u e l if tl e r a n d c l e a n t a n k .

R e p l a c e o r r e p a ri f u e l il n e .

r

C h e c k e p a ri p i s p e r t o n e n

, g i c y il n d e r n e r e p a ri a n d v a l v e s .

A d j u s t m a n u a .l

o r

R e p a ri e n g i n e o r r e p l a c e i n j e c t o r r e p a ri m a n u a .l

i n a c c o r d a n c e w ti h

C h e c k e n g i n e o li p r e s s u r e .

C o m p l y w ti h c o l d s t a r it n g i n s t r u c it o n s a n d p r o p e r o li v i s c o s ti y .

C h e c k w h e t h e r c l e a r ( n o t t u r b i d ) f u e l e m e r g e s f r o p u m m p t h e

) .

fI f u e l t h e il n e f u e l i

( d e s t a c h t u r b i d f r o m o r s e i n j e c p a r a it o n t e d , w a r m u p t h e s u p p l y e n g i n e s y s t e m .

o r

R d r a i n e f u e l t h e w ti h c o m p l e t e w i n t e r f u e l g r a d e d i e s e l f u e .l

E n s t a

E n g i n e n o r m a l

L s

L o w p o e w l o w s m g i n e r t e r e s e n d e n g i n e p

.

o k e .

e f i s s o p e r a it o n .

g i n e e t ri e s d s o

, w p s b u b t y s ti c h e d p o w e p o w e r b l a c k t o o p s ti s e

,r o f u fl o u t

.f

p s o o n d u u e x h a u s t t r i t p u t n g a a n n a s d d

E

T

F

F

F

F

F

F

F n h r u u u u g i n o t e l u e l u e l e l e l e l u e l t if lt e t a if if a t a e o tl e r s u n k tl e r n k tl e r n k l li e v p p l y e e t o e m m r o b l o c b l b l o c v e n p c l o g i p t t t n h o c y g e d ?

it n g i c k ?

S T k e d ?

k e y ?

k e d ?

?

i s

O P d ?

p o s i it o n ?

i n a d e q u a t e ?

S p e e d c o n t r o l l e v e r d o e s n o t s e l e c t e d p o s i it o n ?

r e m a i n i n

E n g i n e o li l e v e l t o o f u ll ?

A ri if tl e r b l o c k e d ?

I n c o r r e c t v a l v e c l e a r a n c e s ?

M a fl u n c it o n a t i n j e c t o r ?

R e f o r if ll w i e n g i n e c r a n k c a s e n t e r e n v ri o n m e n .t

w ti h c o r r e c t t y p e o f o li

R e p o s i it o n t h r o t lt e l e v e r t o R U N p o s i it o n .

R e p l a c e f u e l if tl e .r

C h e c k t h e e n t ri e f u e l s y s t e m .

A d d f u e .l

R e p l a c e f u e l if tl e .r

F i ll w ti h N o .

2 d i e s e l f u e .l

R e p l a c e f u e l if tl e .r

E n s u r e t h a t t a n k i s a d e q u a t e l y v e n t e d .

S e e e n g i n e m a n u a l f o r c o r r e c it v e a c it o n .

C

C

A

S o l e d r r a n j u e e e s t c e n t o r e v a n g i r e p n e l v e s g i n e l a c e m o p e r a n li a l e ri v e if tl l ?

e e n g i n e u a .l

.r

s p e c i if c a it o n .

PAGE 26 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 —TROUBLESHOOTING

Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Compactor Troubleshooting (Table 9) information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant.

S Y M P T O M

T A B L E 9 .

T R O U B L E S H O O T I N G C O M P A C T O R

P O S S I B L E C A U S E S O L U T I O N

A d j u s t o r r e p l a c e c l u t c h .

C l u t c h s il p s ?

V b e tl s il p s ?

A d j u s t o r r e p l a c e V b e l .t

T r a v e l s p e e d l o w a n d v i b r a it o n w e a k .

E x c e s s i v e O li i n v i b r a t o r ?

T r o u b l e i n v i b r a t o r i n t e r n a l s ?

F i ll t o c o r r e c t l e v e l ..

C h e c k d e f e c it v v i e b r a t o r p a r t s , a s s e m b l y r e p l a c e a f o r n y a n y d e f e c w o r n it v e p a r t s .

o r

A e r a it o n r e v e r s i n g i n h y d r s y s t e .

?

a u il c o li f o r f o r t r a v e l

E n g i n e s p e e d i n c o r r e c t ?

T r a v e l r e v e r s i n g s y s t e m i n o p e r a it v e .

?

R e v e r s i n g l e v e r i n s t a ll a it o n c o r r e c t ?

B r o k e n o r d e f e c it v e o li h o s e ?

t

T r o a v e l s w ti s c f o r w a r d h d ri e c o r it o n .

b a c k w a r d b u t u n a b l e

A e r a it o n r e v e r s i n g i n h y d r s y s t e .

?

a u il c o li f o r f o r t r a v e l

E x c e s s i v e o li i n r e v e r s i n g s y s t e m ?

S e l e c t o r v a l v e c l o g g e d w ti h t r a s h ?

D o e s n o t t r a v e l i n f o r w a r d o r r e v e r s e .

C y il n d e r p i s t o n b e a r i n g f a li u r e ?

V b e tl d i s e n g a g e d o r s il p s ?

C l u t c h s il p s ?

P u m p i n p u t d a m a g e d ?

s h a t k e y o r a d a p t e r k e y w a y

P u r g e a ri i n h y d r a u il c o i .l

( B l e e d p l u g )

S e t e n g i n e s p e e d t o c o r r e c t R P M .

C h e c k e n t ri e t r a v e l s y s t e m .

C l e a n i n s t a ll a it o n o f r e v e r s i n g l e v e .r

R e p l a c e o li h o s e .

P u r g e a ri i n h y d r a u il c o i .l

( B l e e d p l u g )

F i ll t o c o r r e c t l e v e l ..

C l e a n s e l e c t o r v a l v e .

C h e c k l e a k a g e p i s t a t o n b e a r i n g

U S H p a c k i n i n g .

c y il n d e r f o r

E n g a g e V b e l ,t a d j u s t o r r e p l a c e .

A d j u s t c l u t c h , r e p l a c e fi n e c e s s a r y .

R e p l a c e i n p u t s h a t k e y o r a d a p t e r k e y w a y

C y il n d e r p i s t o n b e a r i n g f a li u r e ?

C h e c k l e a k a g e p i s t a t o n b e a r i n g

U S H p a c k i n i n g .

c y il n d e r f o r

R e v e r s i n g g r e a .t

l e v e r o p e r a it n g r e s i s t a n c e

E x c e s s i v e h y d r a u il c o li ?

F i ll t o c o r r e c t l e v e .l

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 27

The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions.

The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed.

Sample Parts List:

NO. PART NO. PART NAME QTY.

REMARKS

1 12345

2 *

2 * 12347

3 12348

4 12349

BOLT ...................... 1 ...... INCLUDES ITEMS W/ *

WASHER, 1/4 IN. ............. NOT SOLD SEPARATELY

WASHER, 3/8 IN. ... 1 ...... MQ-45T ONLY

HOSE ................... A/R .... MAKE LOCALLY

BEARING ............... 1 ...... S/N 2345B AND ABOVE

NO. Column

MVH-306DS2 — EXPLANATION OF CODES IN REMARKS COLUMN

Unique Symbols - All items with same unique symbol

( * , #, + , %, or >) in the number column belong to the same assembly or kit, which is indicated by a note in the “Remarks” column.

Duplicate Item Numbers - Duplicate numbers indicate multiple part numbers are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine.

When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order.

PART NO. Column

Numbers Used - Part numbers can be indicated by a number, a blank entry, or TBD.

TBD (To Be Determined) is generally used to show a part that has not been assigned a formal part number at time of publication.

A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column.

QTY. Column

Numbers Used - Item quantity can be indicated by a number, a blank entry, or A/R.

A/R (As Required) is generally used for hoses or other parts that are sold in bulk and cut to length.

A blank entry generally indicates that the item is not sold separately. Other entries will be clarified in the “Remarks”

Column.

REMARKS Column

Some of the most common notes found in the “Remarks”

Column are listed below. Other additional notes needed to describe the item can also be shown.

Assembly/Kit - All items on the parts list with the same unique symbol will be included when this item is purchased.

Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break - Used to list an effective serial number range where a particular part is used.

Indicated by:

“S/N XXXXX AND BELOW”

“S/N XXXX AND ABOVE”

“S/N XXXX TO S/N XXX”

Specific Model Number Use - Indicates that the part is used only with the specific model number or model number variant listed. It can also be used to show a part is NOT used on a specific model or model number variant.

Indicated by:

“XXXXX ONLY”

“NOT USED ON XXXX”

“Make/Obtain Locally” - Indicates that the part can be purchased at any hardware shop or made out of available items. Examples include battery cables, shims, and certain washers and nuts.

“Not Sold Separately” - Indicates that an item cannot be purchased as a separate item and is either part of an assembly/kit that can be purchased, or is not available for sale through Multiquip.

PAGE 28 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — SUGGESTED SPARE PARTS

MVH-306DS2 W/ YANMAR

L70V6

DIESEL ENGINE

1 to 3 Units

Qty. ..... P/N ......................... Description

1 ......... 956100054 .............. THROTTLE WIRE

2 ......... 070200373 .............. V-BELT

3 ......... 11425012580 .......... ELEMENT W/ PRE-FILTER

1 ......... 16081076630 .......... STARTER ROPE

2 ......... 11425055121 .......... FUEL FILTER W/GASKET

1 ......... 11428855010 .......... CAP, FUEL TANK W/GASKET

1 ......... 11425035110 .......... LUBE OIL STRAINER

1 ......... 11425055100 .......... FUEL STRAINER

1 ......... 955300680 .............. IGNITION SWITCH W/ KEY

3 ......... 955000010 .............. KEY, IGNITION SWITCH

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 29

NAMEPLATE AND DECALS

MVH-306DS2 — NAMEPLATE AND DECALS

PAGE 30 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — NAMEPLATE AND DECALS

NAMEPLATE AND DECALS

10

11

12

13

8

9

6

7

4

5

2

3

NO.

PART NO.

1 920201950

920105070

920110370

920209620

920207480

920204580

920203330

920211060

920206960

920201580

920211010

920106760

0732004460

PART NAME

DECAL: OIL SAE 10W-30

QTY.

REMARKS

1

DECAL: MIKASA LOGO ............................ 1......... ELECTRIC START MODEL ONLY

DECAL: MODEL LOGO MVH-306 1

DECAL: CAUTION

DECAL: SHELL TELLUS OIL 46

1

1

DECAL: FULL THROTTLE

DECAL: EAR PROTECTION

1

1

DECAL: CAUTION (TRAVEL LEVER) 1

DECAL: SERIAL NO. .................................. 1......... CONTACT MQ PARTS DEPT.

DECAL: MQ LOGO

DECAL: V-BELT HDPF-5370

DECAL: STOP-RUN-START

DECAL: STARTER SWITCH

1

1

1

1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 31

VIBRATING PLATE ASSY.

MVH-306DS2 — VIBRATING PLATE ASSY.

PAGE 32 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — VIBRATING PLATE ASSY.

VIBRATING PLATE ASSY.

19

20

21

31

15

16

17

18

32

33

9

10

11

12

7

8

5

6

NO.

PART NO.

3

4

1

2

464117840

953405840

953402930

953400270

953405260

939010260

020316130

030216400

001221635

001221830

58407

030216400

939010010

020310080

031110160

030210250

464343730

011008015

030208200

52993

012218050

58407

PART NAME

VIBRATING PLATE

DRAIN PLUG MI8 (H)

COPPER PACKING 19X30X1

PLUG 1/4X14 10L

PACKING 1/4 (CU)

SHOCK ABSORBER 110X60H

NUT M16

WASHER, LOCK M16

BOLT 16X35 T

BOLT 18X30 T

WASHER, LOCK M18

WASHER, LOCK M16

SHOCK ABSORBER, STOPPER 45

NUT M10

WASHER, FLAT M10

WASHER, LOCK M10

COVER, VIBRATING PLATE

BOLT 8X15 T

WASHER, LOCK M8

EXTENSION PLATE

BOLT 18X50 T

WASHER, LOCK M18

8

4

4

8

4

4

1

4

QTY.

1

1

1

1

8

2

2

8

8

8

4

4

4

4

REMARKS

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 33

BASE AND ENGINE ASSY.

MVH-306DS2 — BASE AND ENGINE ASSY.

PAGE 34 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — BASE AND ENGINE ASSY.

BASE & ENGINE ASSY.

10

11

12

13

8

9

6

7

4

5

2

3

NO.

PART NO.

1 464117850

914410026

0105051045

030210250

031110160

464216560

011208025

030208200

031108160

464343670

464457360

456343340

951400110

38

39

40

21

35

36

37

17

18

19

20

13-1 951406790

14 952400690

15

16

001220830

030208200

464216640

092006010

464343660

464216590

001521050

464117920

456449950

011208030

030208200

031108160

022710809

PART NAME

BASE

ENGINE ASSY. L70V6 (YANMAR)

BOLT 10X45 T

WASHER, LOCK M10

WASHER, FLAT M10

BELT COVER (IN)

BOLT 8X25 T

WASHER, LOCK M8

WASHER, FLAT M8

DUST-PROOF SPONGE (IN)

SPACER/MVH-306

CLUTCH ASSY./CHM03/W.FAN

KEY 7X7X35

KEY 7X7X36 RR

WASHER 9X35X4.5

BOLT 8X30 T

WASHER, LOCK M8

DUST-PROOF COVER

FLAT HEAD SCREW 6X10

DUST-PROOF SPONGE (OUT)

BELT COVER (OUT)

SOCKET HEAD BOLT 10X50 T

RUBBER COVER (GUARD FRAME)

PLATE, COVER

BOLT 8X30 T

WASHER, LOCK M8

WASHER, FLAT M8

NYLON NUT M8

3

3

3

1

1

4

1

1

1

1

3

1

1

1

1

1

1

1

1

4

4

1

4

QTY.

1

4

4

1

4

REMARKS

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 35

MVH-306DS2 — BASE AND ENGINE ASSY. (CONTINUED)

BASE AND ENGINE ASSY. (CONTINUED)

PAGE 36 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — BASE AND ENGINE ASSY. (CONTINUED)

BASE AND ENGINE ASSY. (CONTINUED)

49

51

52

53

45

46

47

48

NO.

PART NO.

41

42

43

44

459010060

459010070

459010090

459010080

0401140030

464457380

014208020

030208200

454010020

464117910

012214030

030214350

63

64

65

66

59

60

61

62

459455560

22190160002

070200373

2344600213

151010680

58151

020406040

959406800

70

71

959407260

001221015

72 030210250

103 464457600

104 2283720111

105 001220620

106 030206150

107 031106100

PART NAME

UNION TIP, DRAIN

DRAIN HOSE

HOSE BAND

GASKET (OIL DRAIN)

PLUG

DRAIN JOINT

BOLT 8X20 T

WASHER, LOCK M8

CLAMP TC-100

GUARD HOOK

BOLT 14X30 T

WASHER, LOCK M14

UNION, OIL DRAIN

SEAL WASHER 16S

V-BELT

RETURN SPRING

CLAMP CP.

WASHER, FLAT M5

NUT M6, H=4.2

NUT M6 (SPECIAL-L10)

CLIP D6 (FOR M10)

BOLT 10X15 T

WASHER, LOCK M10

EXHAUST DEFLECTOR

BAND CP

BOLT 6X20 T`

WASHER, LOCK M6

WASHER, FLAT M6

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

4

4

1

1

1

1

1

1

QTY.

2

2

1

1

REMARKS

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 37

VIBRATOR ASSY.

MVH-306DS2 — VIBRATOR ASSY.

PAGE 38 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

VIBRATOR ASSY.

NO.

PART NO.

2

3

A

1#

464910020

464117880

001221470

001221450

4

5#

6#

8#

030214350

047920120

457212410

951405370

9# 456327150

10# 080200550

11# 060105030

12# 951404970

13# 464343700

14# 009120301

15# 456337670

16# 009120302

17# 456337380

18# 456010010

19# 464343720

20# 040006911

21# 953010030

25# 042506000

26# 080200100

27# 455435051

28# 455010070

29# 080100260

30# 456327130

31# 456210636

33# 050101050

34# 001221025

35# 030210250

36# 011008015

37# 953404600

38# 455010020

39# 031110160

43# 952405470

46# 464343710

47# 464457370

48# 012212030

49# 030212300

51

52

464216600

001520852

MVH-306DS2 — VIBRATOR ASSY.

PART NAME QTY.

REMARKS

VIBRATOR ASSY. ...............................................1 ............. INCLUDES ITEMS W/ #

VIBRATING CASE 1

BOLT 14X150 T

BOLT 14X50 T

6

4

WASHER, LOCK M14

ROLLER BEARING NJ310EMC4

ROTARY SHAFT, DRIVE

KEY 15X10X39 RR

GEAR, DRIVE

STOP RING S-55

OIL SEAL SB-50729

KEY 12X8X30 R

10

4

1

1

1

2

1

1

ECCENTRIC ROTATOR

SOCKET HEAD BOLT 16X40 T

ROTARY SHAFT, DRIVEN

SOCKET HEAD BOLT 16X30 T

PISTON ROD

KNOCK PIN 10X70

GEAR (DRIVEN)

BEARING 6911

SEAL CAP/SC72-8N

BEARING 6000ZZSG

STOP RING S-10

PISTON, 22.4D

PACKING USH-22.4X30X5

STOP RING R-26

BEARING COVER

CYLINDER (L)/(AC)

4

2

1

2

1

1

1

2

1

2

1

1

1

1

1

1

O-RING G-105

BOLT 10X25 T

WASHER, LOCK M10

BOLT 8X12 T

COPPER PACKING 8X16X2

ELBOW 45 DEG. 15-0404

WASHER, FLAT M10

SHIM 90X110X0.5

PULLEY

WASHER

BOLT 12X30 T

WASHER, LOCK M12

BELT COVER (LOWER)

SOCKET HEAD BOLT 8X60 T

1

1

1

1

1

5

4

2

1

1

8

1

2

8

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 39

CONTROL HANDLE ASSY.

MVH-306DS2 — CONTROL HANDLE ASSY.

PAGE 40 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — CONTROL HANDLE ASSY.

35

36

37

38

27

28

29

34

22

23

25

26

18

19

20

21

45

46

47

48

39

40

43

44

12

13

14

15

8

9

10

11

5

7

3

4

1

2

CONTROL HANDLE ASSY.

NO.

PART NO.

464343680

456336420

012212035

030212300

031112230

456336400

456449940

456449930

001221681

032124400

025306016

0401450160

020316130

020416100

455434950

455010030

939010060

020310080

020412070

022411635

954404230

011206020

030206150

952404470

020106050

501402870

501402880

959403460

020310080

456449980

953405260

031110160

464343690

0105050616

030206150

952404470

464457710

464457720

PART NAME

HANDLE BRACKET

HANDLE BRACKET (R)

BOLT 12X35 T

WASHER, LOCK M12

WASHER, FLAT M12

RUBBER COUPLING

SHOCK ABSORBER

RUBBER PLATE

BOLT 16X250 T

CONICAL SPRING WASHER M24

SPRING PIN 6X16

WASHER, FLAT M16

NUT M16

NUT M16, H=10

SPINDLE

KNOB

SHOCK ABSORBER

NUT M10, H=6

NUT M12, H=7

WING NUT M16

CLAMP SA120-18

BOLT 6X20 T

WASHER, LOCK M6

WASHER, FLAT M6

NUT M6

HANDLE STOPPER

SPRING/HANDLE (1.4X18X44)

BALL GRIP 32D-M10

NUT M10, H=6

RUBBER PACKING 9D-20D-5T

PACKING 1/4 (CU)

WASHER, FLAT M10

HANDLE COVER

BOLT 6X15 T

WASHER, LOCK M6

WASHER, FLAT M6

PACKING A, HANDLE COVER

PACKING B, HANDLE COVER

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

6

6

1

6

1

1

1

1

2

2

1

2

2

2

QTY.

1

1

4

2

4

4

REMARKS

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 41

CONTROL HANDLE ASSY.

MVH-306DS2 — CONTROL HANDLE ASSY. (CONTINUED)

PAGE 42 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — CONTROL HANDLE ASSY. (CONTINUED)

CONTROL HANDLE ASSY.

71

72

73

80

67

68

69

70

NO.

PART NO.

61

64

65

66

464117890

464216630

464457400

012010030

030210250

464216620

030210250

031110160

020310080

011208025

030208200

464457340

94

95

96

99

89

90

91

93

85

86

87

88

81

82

83

84

959403840

464457420

464457350

001520820

031116260

458460660

033910080

464457440

464010010

001220625

020306050

464010020

001520520

031105080

020305040

954002270

101 956100054

103 454010020

104 959021815

104 959021810

PART NAME

HANDLE

TRAVEL LEVER

HANDLE BOSS

BOLT 10X30 T

WASHER, LOCK M10

GRIP

WASHER, LOCK M10

WASHER, FLAT M10

NUT M10

BOLT 8X25 T

WASHER, LOCK

THROTTLE LEVER

BAR GRIP I.D. 12 MM

COVER, THROTTLE

ARM, THROTTLE

SOCKET HEAD BOLT 8X20 T

WASHER, FLAT

WASHER 16.4-35-0.6

CONICAL SW 16.3 X 31.5 X 1.2

STEEL BALL D6 (SUJ)

DRY BUSHING/ LBF-1620

BOLT 6X25 T

NUT M6

ROD END M5

SOCKET HEAD BOLT 5X20 T

WASHER, FLAT M5

NUT M5

OIL HOSE W/SPRING 1/4 X 920

THROTTLE WIRE

CLAMP TC-100

SPIRAL TUBE 6D-330L

SPIRAL TUBE KEP6/ L=500

1

1

1

1

2

1

1

2

1

1

1

1

3

1

1

2

1

1

1

1

2

1

2

2

2

2

2

1

QTY.

1

2

1

1

REMARKS

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 43

HAND PUMP ASSY.

MVH-306DS2 — HAND PUMP ASSY.

PAGE 44 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

HAND PUMP ASSY.

B *

C *

2 *

3 *

4 *

9 *

10 *

11 *

NO.

PART NO.

4649-10040

464910080

464010040

464010050

22 *

22 *

26# *

27# *

28# *

50 *

51 *

52# *

53# *

81 *

82 *

83 *

84

12 *

13 *

14 *

15 *

16# *

17# *

18# *

19# *

464010060

464010070

099205005

464010080

464010090

464010100

458010080

001520620

050200200

050200220

050300380

050200180

464010110

464010111

050300400

050200150

050100400

464010120

458451630

069904010

069901010

984010030

984010040

984010050

464216721

MVH-306DS2 — HAND PUMP ASSY.

PART NAME QTY.

REMARKS

ACCUMLATOR 1

O-RING DUST,SEAL,SET ...................... 1 ............. INCLUDES ITEMS W/#

CONTROL SHAFT

BUSH

1

2

CAM

STOPPER

SOCKET HEAD SCREW 5X5 T

PLUG

PIN,STOPPER

PLUG

BREATHER

SOCKET HEAD BOLT 6X20 T

1

2

2

1

2

2

1

1

O-RING P-20

O-RING P-22

O-RING S-38

O-RING P-18

1

1

2

2

ACCUMULATOR CASE ..........................1 ............. S/N N2418 AND BELOW

ACCUMULATOR CASE ..........................1 ............. S/N N2419 AND ABOVE

O-RING S-40

O-RING P-15

1

1

O-RING G-40

SPRING PLUG

1

1

BREATHER CAP 1

DUST SEAL SER-40 .............................. 1 ............. S/N N2419 AND ABOVE

DUST SEAL SER-15 .............................. 1 ............. S/N N2419 AND ABOVE

SPRG.COMPRESSION TOOL 1

DISASSEMBLING TOOL A

DISASSEMBLING TOOL B

1

1

HAND PUMP ASSY ............................... 1 ............. INCLUDES ITEMS W/ *

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 45

BATTERY ASSY. (OPTION)

MVH-306DS2 — BATTERY ASSY. (OPTION)

PAGE 46 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — BATTERY ASSY. (OPTION)

BATTERY ASSY. (OPTION)

16

17

18

19

20

12

13

14

15

8

9

10

11

6

7

4

5

2

3

NO.

PART NO.

1 464457460

464457470

464216660

456447590

456447600

014210020

030210250

604010240

955300490

955300470

955300480

955300460

464117860

464457410

001220825

030208200

464457390

022710809

031108160

464343740

PART NAME

BATTERY CORD (-) 400L

BATTERY CORD (+) 550L

CRADLE, BATTERY

RUBBER PLATE (E) 28X240X5

RUBBER PLATE 50X240X10

SOCKET HEAD BOLT 10X20 T

WASHER, LOCK M10

BATTERY 46B24L

BATTERY TERMINAL (-)

TERMINAL COVER (-)

BATTERY TERMINAL (+)

TERMINAL COVER (+)

COVER, BATTERY

FIXED PLATE, BATTERY COVER

BOLT 8X25 T

WASHER, LOCK M8

BATTERY BOLT

NYLON NUT M8

WASHER, FLAT M8

HOLDER, BATTERY

2

4

1

1

1

1

1

1

2

2

1

2

QTY.

1

1

1

2

2

4

2

1

REMARKS

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 47

ELECTRIC DEVICE ASSY.

MVH-306DS2 — ELECTRIC DEVICE ASSY.

2

30

28

1

41

26

41A

ST

IG

B

24

26

44

PAGE 48 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

MVH-306DS2 — ELECTRIC DEVICE ASSY.

ELECTRIC DEVICE ASSY.

NO.

PART NO.

1

2

24

26

464457460

464457470

464459260

454010020

28

30

955300400

506010070

41 955300680

41A# 955000010

44 105198-78570

PART NAME

BATTERY CORD (-) 400L

BATTERY CORD (+) 550L

WIRE CP

CLAMP TC-100

QTY.

1

3

1

1

REMARKS

BUZZER (EBL)

CLAMP TC-150

1

1

IGNITION SWITCH ASSY. ..................................1 ............. INCLUDES ITEMS W/ #

IGNITION KEY 1

HARNESS (C), WIRE 1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 49

YANMAR L70V6 ENGINE— CYLINDER BLOCK ASSY.

CYLINDER BLOCK ASSY.

47 38

42

40

27

31

52

32

27

37 35

(51)

11

5

25

45

8 -1

12 29

30

23

24

30

48

28

49

44 26

43

39

46

40

42

39

43

1

8 -1 SEE FUEL INJECTION PUMP ASSY.

PAGE 50 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE — CYLINDER BLOCK ASSY.

CYLINDER BLOCK ASSY.

27

28

29

30

23

24

25

26

NO.

PART NO.

1

5

11

12

11421001010

11439501330

11439901380

11429901800

11429901830

11425001841

22312040080

23875020000

11429901600

26226060182

26226060222

26366060002

47

48

49

50

43

44

45

46

51

52

31

32

11439901410

11421001460

35$ 11435002100

37 11429935150

38

39

26106080352

11429901690

40 11469901760

42# 11429901950

22190160002

11429902030

11435002113

16011002220

16011002220

24162152116

26106080122

11435002200

11435002210

12125239450

PART NAME

CYLINDER BLOCK ASSY.

CYLINDER HEAD GASKET ASSY.

O- RING

SHIM SET

COVER (FO PUMP)

GASKET

PIN 4X8 STRAIGHT

PLUG PT1/4 STEEL

PIN, 8X12

STUD M 6X18 PLATED

STUD M 6X22 PLATED

NUT M6

2

3

2

1

2

1

1

1

QTY.

1

1

1

1

REMARKS

CRANKCASE GASKET 1

CRANKCASE COVER D ............................... 1 ........... INCLUDES ITEMS W/ $

MAIN BEARING US=STD.

L.O. INLET PIPE

1

1

BOLT M 8X35 PLATED

PLUG M16

15

2

OIL GAUGE CAP, W/LUB .............................. 2 ........... INCLUDES ITEMS W/ #

O- RING 2

SEAL WASHER 16S

RETAINER

BALL BEARING

OIL SEAL

1

1

2

1

OIL SEAL

NEEDLE BEARING

1

1

BOLT M 8X12 PLATED 1

MAIN BEARING US=0.25 ............................. 1 ........... UNDERSIZED PART

MAIN BEARING US=0.50 ............................. 1 ........... UNDERSIZED PART

OIL PRESSURE SENDER 1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 51

CYLINDER HEAD ASSY.

YANMAR L70V6 ENGINE— CYLINDER HEAD ASSY.

PAGE 52 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE — CYLINDER HEAD ASSY.

CYLINDER HEAD ASSY.

7

8

2

3

NO.

PART NO.

1 11421001200

11421001210

11421011020

11421011100

11421011110

9

10

11

11421011120

11421011180

11421011930

13 11421011250

14 # 11421011260

15 # 11421011280

35

37 *

40 *

42 *

45

31

32

33

34

16 # 11421011650

18#+ 11429911240

19#+ 26856060002

20 # 11421011660

22#$ 11429911240

27

28

29

30

23#$ 26856060002

24 11435011340

25

26

11477111461

11429511470

10501011490

11429911600

11421011900

22351040008

26106060402

26226060552

26366060002

11421011310

11421011950

11421003590

11429903640

22312030160

26106060552

PART NAME

CYLINDER HEAD A BOLT

CYLINDER HEAD B BOLT

CYLINDER HEAD ASSY.

INTAKE VALVE

EXHAUST VALVE

QTY.

REMARKS

2

1

1

2

1

VALVE SPRING

SPRING RETAINER

COTTER ASSY.

2

2

2

SUPPORT ASSY. ROCKER ........................... 1 ......... INCLUDES ITEMS W/ #

ROCKER ARM SUPPORT

C TYPE RETAINING PIN

1

2

INTAKE ARM ASSY. ....................................... 1 ......... INCLUDES ITEMS W/ +

ADJUSTING SCREW 1

LOCK NUT 6 1

EXHAUST ARM ASSY. ................................... 1 ......... INCLUDES ITEMS W/ $

ADJUSTING SCREW 1

LOCK NUT 6

VALVE STEM SEAL

NOZZLE GASKET

NOZZLE SPACER

VALVE CAP

VALVE SPRING WASHER

NOZZLE RETAINER

SPRING PIN 4X8

BOLT M6X40 PLATED

STUD M 6X55

NUT M6

BONNET GASKET

1

2

1

1

2

2

1

1

2

2

2

1

BONNET HEAD ASSY. ................................... 1 ......... INCLUDES ITEMS W/ *

DECOMP SHAFT ASSY.

1

DECOMP SPRING

PARALLEL PIN 3X16

1

1

BOLT M 6X55 PLATED 1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 53

AIR CLEANER

YANMAR L70V6 ENGINE— AIR CLEANER ASSY.

PAGE 54 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE— AIR CLEANER ASSY.

AIR CLEANER ASSY.

2 *

3 *

4 *

6 *

7 *

10 *

11

12

NO.

PART NO.

1 11421012510

11421012020

11421012520

11421012560

11421012580

11421012590

11421012600

11429912300

11421012210

13

14

26106060202

26226060302

PART NAME QTY.

REMARKS

AIR CLEANER ASSY. ..................................... 1 ......... INCLUDES ITEMS W/ *

AIR CLEANER BODY 1

AIR CLEANER COVER

WING NUT

STUD BOLT

1

1

1

ELEMENT ASSY.

KNOCKING KNOB

U- NUT

AIR CLEANER GASKET

BOLT M 6X20 PLATED

STUD M 6X30

3

1

1

1

1

3

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 55

MUFFLER ASSY.

YANMAR L70V6 ENGINE— MUFFLER ASSY.

PAGE 56 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE— MUFFLER ASSY.

MUFFLER ASSY.

22

23

24

25

NO.

PART NO.

15 11429913200

16 11439913520

26106060142

26216080182

26366080002

11429913800

PART NAME

MUFFLER GASKET

MUFFLER ASSY.

BOLT M 6X14 PLATED

STUD M 8X18 PLATED

NUT M8

EXHAUST DEFECTOR

QTY.

REMARKS

1

1

2

1

2

2

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 57

YANMAR L70V6 ENGINE— CRANKSHAFT AND CAMSHAFT ASSY.

CRANKSHAFT AND CAMSHAFT ASSY.

PAGE 58 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE— CRANKSHAFT AND CAMSHAFT ASSY.

CRANKSHAFT AND CAMSHAFT ASSY.

PART NAME

CAMSHAFT ASSY.

TAPPET

ROLLER TAPPET ASSY.

PUSH ROD ASSY.

CRANKSHAFT (D) ASSY.

QTY.

REMARKS

1

2

1

2

1

NUT 1

FLYWHEEL (DE) ASSY. .................................. 1 ......... INCLUDES ITEM W/ *

RING GEAR 1

FLYWHEEL WASHER 1

KEY 4X12

BALANCER SHAFT ASSY.

BOLT M 8X20 PLATED

WASHER

KEY 7X36 RR

BEARING

1

1

1

1

1

2

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 59

PISTON ASSY.

YANMAR L70V6 ENGINE— PISTON ASSY.

PAGE 60 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE— PISTON ASSY.

PISTON ASSY.

NO.

PART NO.

28 71421022720

28

28

71421022620

71421022580

37

38

41 *

42 *

42

42

44 *

30 # 71487022502

30 $ 71487022542

30 % 71487022552

36 11439922300

22252000210

71421023700

11820023200

11421023600

11421023610

11421023620

11438023100

PART NAME QTY.

REMARKS

PISTON W/ RINGS STD ................................. 1 ......... INCLUDES ITEMS W/ #

PISTON W/RINGS OS=0.25 ........................... 1 ......... INCLUDES ITEMS W/ $

PISTON W/RINGS OS=0.50 ........................... 1 ......... INCLUDES ITEMS W/ %

PISTON RINGS SET=STD.

PISTON RING SET 0.S.=0.25

PISTON RING SET 0.2=0.50

PISTON PIN

1

1

1

1

CIRCLIP 21 2

CONNECTING ROD ASSY. ............................ 1 ......... INCLUDES ITEMS W/ *

ROD BOLT 2

CRANK PIN BEARING STD.

1

CRANK BEARING PIN U.S=0.25 .................... 1 ......... UNDERSIZED PART

CRANK BEARING PIN U.S=0.50 .................... 1 ......... UNDERSIZED PART

PISTON PIN BUSH 1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 61

YANMAR L70V6 ENGINE— LUB. OIL PUMP AND GOVERNOR ASSY.

LUB. OIL PUMP & GOVERNOR ASSY.

PAGE 62 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE— LUB. OIL PUMP AND GOVERNOR ASSY.

LUB. OIL PUMP AND GOVERNOR ASSY.

8

9

10

11

NO.

PART NO.

1 11425032010

7 11429932070

11429932570

22312030160

26106060122

11429935110

13

14

15

* 24341000224

26106060162

11421061500

27 # 22322030200

32 # 22322030200

35 71421061700

36 + 11421061290

52

54

55

56

48

49

50

51

44

45

46

47

41

42

43

11429961600

11477061610

11429961190

11477161810

11477161830

11429561940

11477166600

11477166690

13521061090

22451060000

11477061520

11425266051

18336066110

11429966250

11429966440

61

62

63

57

58

59

60

10522566990

26106060142

26106060202

26757060002

11421066010

11429966200

11477161890

65 % 11477161960

66 % 24311000180

PART NAME

LUB. OIL PUMP ASSY.

LUB. OIL PUMP COVER

QTY.

REMARKS

1

1

O- RING COVER

PARALLEL PIN 3X16

BOLT M 6X12 PLATED

1

1

3

LUBE OIL FILTER COMPLETE ...................... 1 ......... INCLUDES ITEMS W/ *

O- RING 1A S- 22.4

1

BOLT M 6X16 PLATED 1

LEVER ASSY. ................................................. 1 ......... INCLUDES ITEMS W/ #

TAPER PIN 3X20

TAPER PIN 3X20

1

1

GOVERNOR ASSY. ........................................ 1 ......... INCLUDES ITEMS W/ +

GOVERNOR WEIGHT ASSY.

OIL SEAL

THRUST WASHER

GOVERNOR WASHER

PLAIN WASHER 14

PLATE

NUT

FUEL LIMITER ASSY.

NUT M14

LEAD

WIRE 0.6

NEEDLE BEARING

1

2

1

1

1

1

1

1

1

1

1

1

REGULATOR HANDLE

REGULATOR BRACKET

RETURN SPRING

ADJUSTING BOLT

SCREW

BOLT M 6X14 PLATED

BOLT M 6X20 PLATED

LOCK NUT M6 PLATED

1

1

1

1

1

1

1

1

REGULATOR SPRING

RETURN SPRING

1

1

PROTECTOR COMPLETE .............................. 1 ......... INCLUDES ITEMS W/ %

SPACER

O- RING 1A P- 18.0

1

1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 63

YANMAR L70V6 ENGINE— COOLING AND STARTING DEVICE ASSY.

COOLING AND STARTING DEVICE ASSY.

PAGE 64 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE— COOLING AND STARTING DEVICE ASSY.

COOLING AND STARTING DEVICE ASSY.

17

19

24 *

25 *

26 *

27 *

20 *

21 *

22 *

23 *

28 *

29 *

30

31

32

9

10

11

12

7

8

5

6

13

14

15

16

NO.

PART NO.

3

4

1

2

11429945220

11421045260

11421045270

11421045300

11421045310

11439945320

11439945340

11421045350

26106060082

26106060202

26226060852

26366060002

11421045100

11429945300

11429945310

11429945330

11429945350

11439976250

11439976510

11439976520

11439976530

11439976540

11439976550

11439976560

11439976570

11439976580

11439976620

11439976630

11439976590

26106060082

26106060122

PART NAME

TANK GROMMET

SIDE COVER B (13)

SIDE COVER A (13)

TOP COVER, BLACK (13)

DAMPER

SEAL RUBBER

CYLINDER COLLAR COVER

TOP COVER SPACER

BOLT M 6X 8 PLATED

BOLT M 6X 20 PLATED

BOLT STUD 6X85

NUT M 6

FAN CASE (SILVER) (17)

CUSHION RUBBER

FAN CASE COLLAR

FAN CASE SEAL

1

1

4

4

5

1

1

1

4

1

1

4

QTY.

REMARKS

1

1

5

1

FAN CASE BOLT 4

RECOIL STARTER (D) ASSY. ........................ 1 ......... INCLUDES ITEMS W/ *

STARTER CASE 1

RECOIL REEL 1

RATCHET

SPIRAL SPRING

RATCHET COVER

SPRING

RETURN SPRING

SCREW

STARTER KNOB

STARTER ROPE

STARTER PULLEY

BOLT M 6X 8 PLATED

BOLT M 6X 12 PLATED

1

1

1

1

1

1

1

1

1

4

3

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 65

YANMAR L70V6 ENGINE— FUEL INJECTION PUMP ASSY.

FUEL INJECTION PUMP ASSY.

PAGE 66 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE — FUEL INJECTION PUMP ASSY.

FUEL INJECTION PUMP ASSY.

NO.

PART NO.

1

11 *

12 *

13 *

14 *

2 *

3 *

4 *

10 *

15 *

16 *

17 *

18

71421051100

10554651020

11425051080

11421051200

11425051160

11421051300

12455051350

11425051600

11425051640

11425051650

22351020006

22351030008

71421053100

19 $ 11421053000

27

27

27

27

27

27

27

27

27

27

27

27

27

27

27

27

27

20$ 11421053100

21$# 11421053080

23$ # 11421053330

24$ # 11421053120

25$ # 11421053130

26$ # 11421053140

27$ # 11421053410

27

27

27

11421053420

11421053430

11421053440

11421053450

11421053460

11421053470

11421053480

11421053490

11421053500

11421053510

11421053520

11421053530

11421053540

11421053550

11421053560

11421053570

11421053580

11421053590

11421053600

11421053610

PART NAME QTY.

REMARKS

FUEL INJECTION PUMP ASSY. .................... 1 ......... INCLUDES ITEMS W/ *

GASKET 1

PLATE

FUEL INJECTION PUMP BODY

1

1

SPRING

DELIVERY VALVE ASSY.

DELIVERY GASKET

CONTROL LEVER ASSY.

SPRING SEAT A

SPRING SEAT B

SPRING PIN 2X 6

SPRING PIN 3X 8

2

1

1

1

1

1

1

1

FUEL INJECTOR ............................................ 1 ......... INCLUDES ITEMS W/$

NOZZLE ASSY.

1

NOZZLE HOLDER ASSY. ............................... 1 ......... INCLUDES ITEMS W/ #

NOZZLE NUT 1

PIN

NOZZLE SPRING

SPRING SEAT

1

1

1

VALVE SPACER ASSY.

SHIM (T=1.00)

SHIM (T=1.05)

SHIM (T=1.10)

SHIM (T=1.15)

SHIM (T=1.20)

SHIM (T=1.25)

SHIM (T=1.30)

SHIM (T=1.35)

SHIM (T=1.40)

SHIM (T=1.45)

SHIM (T=1.50)

SHIM (T=1.55)

SHIM (T=1.60)

SHIM (T=1.65)

SHIM (T=1.70)

SHIM (T=1.75)

SHIM (T=1.80)

SHIM (T=1.85)

SHIM (T=1.90)

SHIM (T=1.95)

SHIM (T=2.00)

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 67

YANMAR L70V6 ENGINE— FUEL TANK & FUEL LINE ASSY.

FUEL TANK AND FUEL LINE ASSY.

PAGE 68 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE — FUEL TANK AND FUEL LINE ASSY.

FUEL TANK AND FUEL LINE ASSY.

NO.

PART NO.

1 71421055700

7 *

8 *

9 *

10

3 *

4 *

23414080000

10530055080

5 * 11428855041

+ 11428855081

11429955100

11425055201

11425055121

11 # 11425055130

12 11421055210

13

14

11421055230

11425055301

15$ 24341000150

16 11421055810

17

18

19

20

22117080000

26106080452

26366060002

26106060162

21 11421059200

22 % 12472259050

23 % 11465059060

24 % 11465259310

25 % 12175059890

26 11477059030

27 > 11427059010

28 > 11426859061

29 11421059800

35 11421059850

PART NAME QTY.

REMARKS

FUEL TANK, BLACK ....................................... 1 ......... INCLUDES ITEMS W/ *

PACKING 8 1

DRAIN PLUG 1

FUEL TANK CAP ASSY. ................................. 1 ......... INCLUDES ITEMS W/ +

CAP VALVE

FILTER, FUEL

1

1

FUEL TANK DAMPER 4

FUEL FILTER .................................................. 1 ......... INCLUDES ITEMS W/ #

GASKET

FUEL TANK STAY A

1

1

FUEL TANK STAY B 1

FUEL COCK ASSY. ........................................ 1 ......... INCLUDES ITEMS W/ $

O- RING 1A S- 15.0

LIFTING BOLT

1

1

WASHER 8

BOLT M 8X 45 PLATED

NUT M 6

BOLT M 6X 16 PLATED

1

1

2

2

RETURN PIPE ASSY. .................................... 1 ......... INCLUDES ITEMS W/ %

CLAMP 9 2

FUEL RETURN PIPE

PROTECT TUBE

RETAINER 1

FUEL OIL PIPE ASSY. ................................... 1 ......... INCLUDES ITEMS W/ >

HOSE CLIP 2

FUEL OIL PIPE

FUEL INJECTION PIPE

INJECTION PIPE SUPPORT

1

1

1

1

1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 69

YANMAR L70V6 ENGINE— STARTING MOTOR AND DYNAMO ASSY.

STARTING MOTOR AND DYNAMO ASSY.

PAGE 70 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE— STARTING MOTOR AND DYNAMO ASSY.

STARTING MOTOR & DYNAMO ASSY.

NO.

PART NO.

PART NAME QTY.

REMARKS

1

9

8

6 *

7 *

* #

* #

2 *

3 *

4 *

5 *

71436277011 STARTER (S114-414A .................................... 1 ......... INCLUDES ITEMS W/ *

ARMATURE 1

BRUSH HOLDER ASSY. ................................. 1 ......... INCLUDES ITEMS W/ #

BRUSH (-)

BRUSH (+)

10 * # 11437179060 BRUSH SPRING

11 *

12 *

X211485016

11438177151

PINION ASSY.

GEAR HOUSING ASSY.

13 *

14 *

15 *

16 *

17 *

18 *

19

11438177110

X2114811000

X2114715500

11438177130

11438177140

11437177160

11437179040

11437179050

11437177170

11437177180

12429877020

12419577770

11437179070

X2114274200

26106100302

THRUST WASHER KIT

PINION STOPPER SET

FIELD COIL ASSY.

REAR COVER

DUST COVER KIT

SHIFT LEVER KIT

MAGNET SWITCH

THROUGH BOLT

BOLT M 6X 37

TERMINAL COVER

BOLT M 10X 30 PLATED

1

1

1

1

2

1

4

1

1

1

1

1

2

2

1

2

20

21

26716080002

11439978260

NUT M 8 1

DYNAMO ASSY. ............................................. 1 ......... INCLUDES ITEMS W/ >

22 > 11439978730

23 > 11439978740

24 16071078710

25 26106060122

26

27

26106060202

26577060142

28 11439977550

STATOR ASSY.

DYNAMO WHEEL

CORD CLAMP

BOLT M 6X 12 PLATED

BOLT M 6X 20 PLATED

SCREW M 6X 14

1

1

1

1

3

3

REG. & HARNESS ASSY. .............................. 1 ......... INCLUDES ITEMS W/ +

30 + 11439977400

31 + 26023040102

32 + 11439977540

33+ % 29411200000

34 + 11439977710

35

36

37

26106060122

26106060202

11435177520

HARNESS BRACKET

SCREW M4X10

1

2

WIRE HARNESS ............................................ 1 ......... INCLUDES ITEMS W/ %

CARTRIDGE FUSE 20A 2

REGULATOR

BOLT M 6X 12 PLATED

BOLT M 6X 20 PLATED

JOINT

1

2

2

1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 71

YANMAR L70V6 ENGINE — TOOLS, LABELS AND GASKETS SET ASSY.

TOOLS, LABELS AND GASKET SET ASSY.

PAGE 72 — MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07)

YANMAR L70V6 ENGINE — TOOLS, LABELS AND GASKETS SET ASSY.

TOOLS, LABELS AND GASKET SET ASSY.

6

7

4

5

NO.

PART NO.

3 11429907100

11429907110

11421007120

11421007130

11429907160

8

11

12 *

13 *

14 *

15 *

16 *

17

11421007200

11429992590

11429992600

11429992710

11429992720

11429992730

11429992740

71421092600

18 # 11439501330

24 # 11439901380

25 # 11439901410

26 # 11429901950

27 # 11425001841

28 # 22190160002

29 # 11435011340

30 # 11477111461

31 # 11421011310

32 # 11421012210

33 # 11429913200

34 # 11429932570

35 # 24341000100

36 # 23414080000

37 # 24341000224

38 # 24341000150

PART NAME

AIR COOLED LABEL

YANMAR LABEL

CAUTION LABEL

HOW TO START- E LABEL

DIESEL LABEL

QTY.

REMARKS

1

1

1

1

1

DECOMPRESSION LABEL 1

TOOL ASSY. ................................................... 1 ......... INCLUDES ITEMS W/ *

TOOL BAG 1

SPANA 1

SPANA

DRIVER

FUEL FITTING

1

1

1

GASKET SET (NON- ASB) ............................. 1 ......... INCLUDES ITEMS W/ #

CYLINDER HEAD GASKET ASSY.

O- RING

CRANK CASE GASKET

1

2

1

O- RING

GASKET

WASHER SEAL 16S

VALVE STEM SEAL

NOZZLE GASKET

BONNET GASKET

AIR CLEANER GASKET

MUFFLER GASKET

O- RING COVER

O- RING 1A S- 10.0

PACKING 8

O- RING 1A S- 22.4

O- RING 1A S-15.0

2

1

2

2

1

1

1

1

1

1

1

1

1

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 73

NOTES

MVH-306DS2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #2 (08/15/07) — PAGE 75

OPERATION AND PARTS MANUAL

HERE'S HOW TO GET HELP

PLEASE HAVE THE MODEL AND SERIAL

NUMBER ON-HAND WHEN CALLING

UNITED STATES

Multiquip Corporate Office

18910 Wilmington Ave.

Carson, CA 90746

Contact: [email protected]

Tel. (800) 421-1244

Fax (800) 537-3927

Mayco Parts

800-306-2926

310-537-3700

Service Department

800-421-1244

310-537-3700

Fax: 800-672-7877

Fax: 310-637-3284

Fax: 310-537-4259

MQ Parts Department

800-427-1244

310-537-3700

Fax: 800-672-7877

Fax: 310-637-3284

Warranty Department

800-421-1244, Ext. 279 Fax: 310-537-1173

310-537-3700, Ext. 279

Technical Assistance

800-478-1244 Fax: 310-631-5032

MEXICO UNITED KINGDOM

MQ Cipsa

Carr. Fed. Mexico-Puebla KM 126.5

Tel: (52) 222-225-9900

Multiquip (UK) Limited Head Office

Hanover Mill, Fitzroy Street,

Momoxpan, Cholula, Puebla 72760 Mexico Fax: (52) 222-285-0420 Ashton-under-Lyne,

Contact: [email protected]

Lancashire OL7 0TL

Contact: [email protected]

CANADA

Multiquip

4110 Industriel Boul.

Laval, Quebec, Canada H7L 6V3

Contact: [email protected]

Tel: (450) 625-2244

Fax: (450) 625-8664

BRAZIL

Multiquip

Tel: 0161 339 2223

Fax: 0161 339 3226

Av. Evandro Lins e Silva, 840 - grupo 505 Tel: 011-55-21-3433-9055

Barra de Tijuca - Rio de Janeiro Fax: 011-55-21-3433-9055

Contact: [email protected], [email protected]

© COPYRIGHT 2007, MULTIQUIP INC.

Multiquip Inc., Mikasa, and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.

The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published in this publication at any time without notice and without incurring any obligations.

Your Local Dealer is: