advertisement
4 port PRI Card installation Guide
www.allo.com Version 2.1
1
4 port PRI Card installation Guide
Copyright
Copyright © 2015 Allo.com. All rights reserved.
No part of this publication may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language without the prior written permission of
Allo.com. This document has been prepared for use by professional and properly trained personnel, and the customer assumes full responsibility when using it.
Proprietary Rights
The information in this document is Confidential to Allo.com and is legally privileged. The information and this document are intended solely for the addressee. Use of this document by anyone else for any other purpose is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of this information is prohibited and unlawful.
Disclaimer
Information in this document is subject to change without notice and should not be construed as a commitment on the part of allo.com. And does not assume any responsibility or make any warranty against errors. It may appear in this document and disclaims any implied warranty of merchantability or fitness for a particular purpose. www.allo.com Version 2.1
2
4 port PRI Card installation Guide
About this manual
This manual describes the Allo product application and explains how to work and use it major features. It serves as a means to describe the configuration and how to use it to accomplish common tasks. This manual also describes the underlying assumptions and users make the underlying data model.
Document Conventions
In this manual, certain words are represented in different fonts, typefaces, sizes, and weights. This highlighting is systematic; different words are represented in the same style to indicate their inclusion in a specific category. Additionally, this document has different strategies to draw User attention to certain pieces of information. In order of how critical the information is to your system, these items are marked as a note, tip, important, caution, or warning.
Icon Purpose
Note
Tip/Best Practice
Important
Caution
Warning
Bold indicates the name of the menu items, options, dialog boxes, windows and functions.
The color blue with underline is used to indicate cross-references and hyperlinks.
Numbered Paragraphs - Numbered paragraphs are used to indicate tasks that need to be carried out. Text in paragraphs without numbering represents ordinary information.
The Courier font indicates a command sequence, file type, URL, Folder/File name e.g. http://www.allo.com
Support Information
Every effort has been made to ensure the accuracy of the document. If you have comments, questions, or ideas regarding the document contact online support:
http://support.allo.com/
www.allo.com Version 2.1
3
4 port PRI Card installation Guide
Table of Contents
www.allo.com Version 2.1
4
4 port PRI Card installation Guide
1. Hardware Setup
1) Customization of the 2 nd
gen PRI card to use in PCI / PCIe server slot. By default, the card is ready to fix in PCIe slot of the server.
Figure 1: Customization of 2 nd
Generation PRI Card
If you want to use the 2 nd
gen 4 ports PRI PCIe card in a PCI slot. Before rotating you need to load the PCI firmware by installing in a PCIe slot.
For further assistance: please contact
http://support.allo.com/
under the category of “PRI Cards”
2) Insert the 2 nd
Gen 4 port PRI (PCI/PCIe) card in the corresponding PCI/PCIe slot of the Server.
Figure 2: 2 nd
Gen 4 ports PRI Card
3) Check if the installed PRI card is detected using the below command
# lspci
www.allo.com Version 2.1
5
4 port PRI Card installation Guide
If the card has been recognized, it will be displayed in the output information. root voiptest ~]# lspci
#04:00.0 Non-VGA unclassified device: Device 1d21:1280 (rev 01)
Device PRI Id
1280
1240
1220
1210
Type of PRI Card
8 ports PRI Card
4 ports PRI Card
2 ports PRI Card
1 port PRI Card
If the PRI card is not recognized by the system, you have to power off and take out the card, and then insert it into another PCI-E slot.
1.1 Hardware Installation
1. Now that you are acquainted with the 2 nd
Gen PRI cards, power down your computer and unplug it from its power source.
2. Attach a static strap to your wrist and open the case.
3. Take away the section place holder and addition the card into a PCI or PCI Express Slot.
4. Replace the cover to your computer
Insert Card
5. Plug the T1 or E1 equipment cable into the RJ45 port. www.allo.com Version 2.1
6
4 port PRI Card installation Guide
Use only shield cables to ensure compliance with the international EMC standards.
2. Software Installation Steps
This chapter describes how to install the software on your computer. Before you proceed please make sure that your computer meets the requirements.
2.1 Test Environment (Example)
Libpri-1.4.14
ALLO Dahdi Driver - 2.9.1 asterisk-11.4.0 centos 6.2 (kernel version: 2.6.32)
Telephony Card : 4 port PRI PCIe card (Model:2aCP4e)
2.2 Installation of Pre requisite packages:
Install all of Asterisk’s dependencies that are required to compile asterisk. Run the followings commands to install the required packages needed for compiling drivers from source.
[root@localhost ~]# yum install bison bison-devel ncurses ncurses-devel zlib zlib-devel openssl openssl-devel gnutls-devel gcc gcc-c++ libxml2
2.3 Installation of LibPRI package
Go to /usr/src directory and Download LibPRI by running the following command
[root@localhost src]# wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4.14.tar.gz
After downloading LibPRI extract the LibPRI tar file by the command
[root@localhost src]# tar -xvzf libpri-1.4.14.tar.gz
Install the LibPRI by following the commands
[root@localhost src]# cd libpri-1.4.14
# make clean
# make
www.allo.com Version 2.1
7
4 port PRI Card installation Guide
#make install
2.4 Installation of Dahdi Driver
Download latest ALLO Dahdi Drivers and available for download from: http://www.allo.com/firmware/pri-card-second-gen/dahdi/dahdi-linux-complete-2.9.1.1+2.9.1.tar.gz
You can download the respective Dahdi version from http://allo.com/pri-card-second-gen.html
under “Guides & Drivers”.
Download the respective dadhi drive executing the following command
#wget http://www.allo.com/firmware/pri-card-second-gen/dahdi/dahdi-linux-complete-2.9.1.1+2.9.1.tar.gz
Extract the downloaded file and enter into that directory
# tar -xvzf dahdi-linux-complete-2.9.1.1+2.9.1.tar.gz
Use the following commands to install DAHDI drivers
# cd dahdi-linux-complete-2.9.1.1+2.9.1
#make
#make install
#make config
Successful Dahdi Driver installation shows the similar output & lists the detected Dahdi devices www.allo.com Version 2.1
8
4 port PRI Card installation Guide
Figure 3: Dahdi driver Installation output
After Dahdi driver installation to list out the Dahdi hardware devices run dahdi_hardware
command and output are as follows:
Figure 4: Dahdi-Hardware command
2.5 Installation of Asterisk
Download the latest version of asterisk. Asterisk is available for download from: http://downloads.asterisk.org/pub/telephony/asterisk/ after downloading asterisk, extract the asterisk tar file by giving following command.
#wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11-current.tar.gz
www.allo.com Version 2.1
9
4 port PRI Card installation Guide
Go to asterisk folder and compile the packages as shown in the screenshot
To install asterisk give the following commands:
[root@pbx1 asterisk-11.4.0]#. /configure
#make
# make install
# make config
If this is your first Asterisk Install, you should install the sample configuration files, to do this run:
# make samples
3. Software Configurations
Add the line “allo4xxp” at the end in /etc/Dahdi/modules file. The “start dhadi” is to “stop and start dhadi service” according to deployment scenario.
After compiling and installing DAHDI and Asterisk, load the Dahdi driver by running:
# /etc/init.d/dahdi start
# dadhi_genconf –vvvvv
If there is any error, please trace the cause. Until all errors are clear up, you should execute
"dadhi_genconf" again, and then go to the next step.
By running "dadhi_genconf", it will generate /etc/dahdi/system.conf and etc/asterisk/dahdichannels.conf automatically. Check whether the generated files information agrees with your hardware setup, if not, you should modify to your specific requirements.
Figure 5: Dahdi channels configure with asterisk
www.allo.com Version 2.1
10
4 port PRI Card installation Guide
Do not forget to confirm dahdi-channels.conf is included in chan_dahdi.conf to configure
Dahdi channels with asterisk, if not, run command:
# echo "#include dahdi-channels.conf" >> /etc/asterisk/chan_dahdi.conf
Execute the following command:
# dadhi_cfg –vvvvv
This command is used for reading and loading parameters in the configuration file system.conf and writing to the hardware.
Start the Asterisk by executing
# asterisk –gvvvvvvvvvc
Make sure that PRI spans are up and active, before making calls. Here is the command to check the
PRI span status
CLI> pri show spans
Figure 6: PRI Span Status (8 Port PRI Card)
If you face any issues, please contact the reseller from whom you have purchased the ALLO product or submit a support ticket http://support.allo.com/
www.allo.com Version 2.1
11
4 port PRI Card installation Guide
www.allo.com Version 2.1
12
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement