Switching Thyristor Selection Guide

Switching Thyristor Selection Guide
Teccor® brand Thyristors
PRODUCT SELECTION GUIDE
Switching Thyristors
Switching Thyristors are solid state switches that are normally open circuits (very high impedance),
capable of withstanding rated blocking/off-state voltage until triggered to on state. Used for circuit
control applications, Littelfuse offers TRIAC, QUADRAC, SCRs, SIDAC, Rectifiers plus Alternistor Triacs for
best commutating and noise immunity. Offered in various and other configurations for a wide range of
currents blocking/off-state voltages, packages, and triggering.
Others:
Through-Hole Packages:
DO-15
TO-92-2L TO-92-3L
TO-251
TO-220
TO-218
Compak DO-214AA TO-252
TO-263
TO-218X
TO3 Fastpak
Surface Mount Packages:
SOT-89
SOT-223
IT(RMS)
VDRM/VRRM
IGT (Q1)
Series
TO-263
TO-252
SOT-223
Compak
TO-3
TO-218X Isl
TO-218 Isl
TO-220 Non-Isl
TO-220 Isl
QxX8Ex
QxXx
Alternistor
TO-251
Standard
TO-92
Sensitive
Surface Mount
Through-Hole
Triac
0.8A
400-600V
3-25mA
LxX8Ex
LxXx
0.8A
400-600V
3-5mA
LX8
1.0A
400-600V
3-25mA
Lx01Ex,LxNx
1.0A
400-800V
3-10mA
L01
4A
400-1000V
3-25mA
Lxx04xx
Qxx04xx
6A
400-1000V
5-50mA
Lxx06xx
Qxx06xx
8A
400-1000V
5-50mA
Lxx08xx
Qxx08xx
600V
10mA
10A
400-1000V
25-50mA
12A
400-1000V
•
•
•
•
•
Qx01Ex,QxNx
•
•
•
•
•
•
•
Qxx06xHx
•
•
•
•
•
Qxx08xHx
•
•
•
•
•
Q6008LH1LED
•
Qxx10xHx
•
•
•
10-50mA
Qxx12xHx
•
•
•
600V
10mA
Q6012LH1LED
•
15A & 16A
400-1000V
10-80mA
Qxx15xx
Qxx16xHx
•
•
•
25A
400-1000V
50-80mA
Qxx25xx
Qxx25xHx
•
•
•
25A
600V
50mA
HQ6025xH5
•
•
•
30A & 35A
400-800V
50mA
Qxx35xHx
•
•
40A
400-1000V
50-100mA
Qxx10xx
Qxx35xx
Qxx40xx
3
•
•
•
•
•
•
•
•
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/17/13
Teccor® brand Thyristors
IT(RMS)
VDRM/VRRM
IGT (Q1)
Series
Surface Mount
Through-Hole
TO-263
TO-252
SOT-223
•
Compak
QxxxxLTH
TO-3
QxxxxLT
TO-218X Isl
Alternistor
TO-218 Isl
Standard
TO-220 Non-Isl
TO-220 Isl
TO-251
TO-92
Sensitive
Quadrac
4-15A
400-600V
8A
600V
Q6008LTH1LED
•
12A
600V
Q6012LTH1LED
•
IT(RMS)
VDRM/VRRM
IGT (Q1)
Series
Surface Mount
Through-Hole
TO-263
TO-252
SOT-223
SOT-89
Compak
TO-218X Non-Isl
TO-218X Isl
TO-218AC Non-Isl
TO-218AC Isl
TO-220 Non-Isl
TO-220 Isl
Standard
TO-251
TO-92
Sensitive
SCR
0.8A
400-600V
12 - 500µA
EC103xx
SxSx
•
0.8A
400-800V
5 - 200µA
SxX8xSx
•
1A
400-600V
10mA
•
•
•
Sx01E
SxN1
•
•
1.5A
200µA
TCR22-x
•
1.5A
200µA
Sx02xS
•
4A
50- 500µA
Sxx04xSx
0.2-15mA
Sxx06xSx
Sxx06x
•
•
•
•
8A
0.2-15mA
Sxx08xSx
Sxx08x
•
•
•
•
10A
0.2-15mA
Sxx10xSx
Sxx10x
•
•
•
•
12A
20mA
Sxx12x
•
•
•
15A & 16A
30mA
Sxx15x
Sxx16x
•
•
•
20A & 25A
30-35mA
Sxx20x
Sxx25x
•
•
•
35A
40mA
Sxx35x
40A
40mA
Sxx40x
•
55A
40mA
Sxx55x
•
65A
50mA
Sxx65x
50mA
Sxx70x
6A
70A
400-1000V
400-800V
•
•
•
•
•
•
•
•
•
•
•
4
•
•
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/17/13
Teccor® brand Thyristors
Series
Standard
Through
Hole
Surface
Mount
Switching
VBO
DO-15,TO-92
DO-214AA
79-330V
150mA
20A
Kxxx0yH
DO-15,TO-92
DO-214AA
190-280V
150mA
20A
K2xx0GHU
DO-15
190-260V
Kxxx1G
DO-15
Kxxx1GL
DO-15
High Energy
Multipulse
IH
ITSM
static dv/
dt
di/dt
TJ
SIDAC
Kxxxzy
Series
Through
Hole
1500V/µs
150A/µs
-40 to +125 °C
150A/µs
-40 to +125 °C
60mA
220A/µs
-40 to +125 °C
200-380V
120mA
150A/µs
-40 to +125 °C
200-265V
30mA
150A/µs
-40 to +125 °C
IF(RMS)
IF(AV)
IFSM
I2t
RMS
forward
current
Average
forward
current
Peak non-repetitive surge current
I2t Value for
fusing
Tstg
TJ
Storage
temperature
range
Rectifiers
Dxx15L
Dxx20L
Dxx25L
single half cycle; f = 50Hz; single half cycle; f = 60Hz;
TO-220 Isl.
15 - 25A
9.5 to15.9A
TJ (initial) = 25°C
TJ (initial) = 25°C
188 - 300A
225 - 350A
5
210 - 508 A2s
-40 to +150 °C
-40 to +125 °C
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/17/13
Teccor® brand Thyristors
Product Descriptions
Thyristors
Quadrac
A Thyristor is any semiconductor switch with a bi-stable
action depending on p-n-p-n regenerative feedback.
Thyristors are normally two- or three-terminal devices for
either unidirectional or bi-directional circuit configurations.
Thyristors can have many forms, but they have certain
commonalities. All Thyristors are solid state switches that
are normally open circuits (very high impedance), capable
of withstanding rated blocking/off-state voltage until
triggered to on state. When triggered to on state, Thyristors
become a low-impedance current path until principle
current either stops or drops below a minimum holding
level. After a Thyristor is triggered to on-state condition,
the trigger current can be removed without turning off the
device. Thyristors are used to control the flow of electrical
currents in applications including:
Quadrac devices, originally developed by Littelfuse, are
Triacs and Alternistor Triacs with a DIAC trigger mounted
inside the same package. These devices save the user the
expense and assembly time of buying a discrete DIAC and
assembling in conjunction with a gated Triac.
The Quadrac is offered in capacities from 4 A to 15 A rms
and voltages from 400 V to 600 V.
Alternistor Triacs
The Alternistor Triac is specifically designed for applications
required to switch highly inductive loads. The design of
this special bidirectional chip effectively offers the same
performance as two Thyristors (SCRs) wired inverse parallel
(back-to-back).
• Home appliances (lighting, heating, temperature
control, alarm activation, fan speed)
This new chip construction provides the equivalent of two
electrically-separate SCR structures, providing enhanced
dv/dt characteristics while retaining the advantages of a
single-chip device.
• Electrical tools (for controlled actions such as motor
speed, stapling event, battery charging)
• Outdoor equipment (water sprinklers, gas engine
ignition, electronic displays, area lighting, sports
equipment, physical fitness)
Littelfuse manufactures 6 A to 40 A Alternistor Triac with
blocking voltage rating from 400 V to 1000 V. Alternistor
Triacs are offered in TO-220, TO-251, TO-252, TO-218, and
TO-218X packages with isolated and non-isolated versions.
Sensitive Triacs
Littelfuse’s sensitive gate Triacs are AC bidirectional
silicon switches that provide guaranteed gate trigger
current levels in Quadrants I, II, III, and IV. Interfacing to
microprocessors or other equipment with single polarity
gate triggering is made possible with sensitive gate Triacs.
Gate triggering currents of 3 mA, 5 mA, 10 mA, or 20 mA
may be specified.
Sensitive SCRs
Littelfuse’s sensitive gate SCRs are unidirectional SiliconControlled Rectifiers representing the best in design,
performance, and packaging techniques for low- and
medium-current applications.
Anode currents of 0.8 A to 10 A rms can be controlled by
sensitive gate SCRs with gate drive currents ranging from
5 µA to 500 µA. Sensitive gate SCRs are ideally suited for
interfacing to integrated circuits or in applications where
high current load requirements and limited gate drive
current capabilities exist. Examples include ignition circuits,
motor controls, and DC latching for alarms in smoke
detectors. Sensitive gate SCRs are available in voltage
ratings to 600 V.
Sensitive gate Triacs are capable of controlling AC load
currents from 0.8 A to 8 A rms and can withstand
operating voltages from 400 V to 600 V.
Standard Triacs
Littelfuse’s products are bidirectional AC switches, capable
of controlling loads from 0.8 A to 35 A rms with 10 mA, 25
mA, and 50 mA IGT in operating Quadrants I, II and III.
Triacs are useful in full-wave AC applications to control AC
power either through full-cycle switching or phase control
of current to the load element. These Triacs are rated to
block voltage in the “OFF” condition from 400 V minimum
with selected products capable of 1000 V operation. Typical
applications include motor speed controls, heater controls,
and incandescent light controls.
SCRs
Littelfuse’s SCR products are half-wave, Silicon-Controlled
Rectifiers that represent the state of the art in design and
performance.
Load current capabilities range from 1 A to 70 A rms, and
voltages from 400 V to 1000 V may be specified to meet a
variety of application needs.
6
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 09/17/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement