FR-F746 00126-EC | FR-F746 00170-EC | FR-F746 00052-EC | FR-F746 00083-EC | FR-F746 EC | FR-F746 00023-EC | FR-F746 00038-EC | FR-F740 10940-EC | FR-F740 12120-EC | FR-F746 00930-EC | FR-F746 01160-EC | Quick start guide | Mitsubishi Electric FR-F740 00023-EC, 00038-EC, 00052-EC, 00083-EC, 00126-EC, 00170-EC, 00250-EC, 00310-EC, 00380-EC, 00470-EC, 00620-EC, 00770-EC, 00930-EC, 01160-EC, 01800-EC, 02160-EC, 02600-EC, 03250-EC, 03610-EC, 04320-EC, 04810-EC Brochure

Add to My manuals
4 Pages

advertisement

Mitsubishi Electric FR-F740/F746 Frequency Inverters Brochure | Manualzz

MITSUBISHI

ELECTRIC

FACTORY AUTOMATION

Frequency inverter

FR-F740

FR-F740-00023-EC

FR-F740-00038-EC

FR-F740-00052-EC

FR-F740-00083-EC

FR-F740-00126-EC

FR-F740-00170-EC

FR-F740-00250-EC

FR-F740-00310-EC

FR-F740-00380-EC

FR-F740-00470-EC

FR-F740-00620-EC

FR-F740-00770-EC

FR-F740-00930-EC

FR-F740-01160-EC

FR-F740-01800-EC

FR-F740-02160-EC

FR-F740-02600-EC

FR-F740-03250-EC

FR-F740-03610-EC

FR-F740-04320-EC

FR-F740-04810-EC

FR-F740-05470-EC

FR-F740-06100-EC

FR-F740-06830-EC

FR-F740-07700-EC

FR-F740-08660-EC

FR-F740-09620-EC

FR-F740-10940-EC

FR-F740-12120-EC

120 % overload capacity*

Rated current

(A)

Rated motor capacity

(kW)

2.3

3.8

5.2

8.3

12.6

17

25

31

38

47

62

77

93

116

180

216

260

325

361

432

481

547

610

683

770

866

962

1094

1212

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

90

110

132

160

185

220

250

280

315

355

400

450

500

560

630

* 120 % for 3 s, 110 % for 60 s, up to 40 °C ** 150 % for 3 s, 120 % for 60 s, up to 50 °C

325

361

432

481

547

144

180

216

260

610

683

770

866

962

1094

57

70

85

106

11.5

16

23

29

35

43

2.1

3.5

4.8

7.6

150 % overload capacity**

Rated current

(A)

Rated motor capacity

(kW)

0.75

1.5

2.2

3.7

30

37

45

55

5.5

7.5

11

15

18.5

22

160

185

220

250

280

75

90

110

132

315

355

400

450

500

560

Frequency inverter

FR-F746

FR-F746-00023-EC

FR-F746-00038-EC

FR-F746-00052-EC

FR-F746-00083-EC

FR-F746-00126-EC

FR-F746-00170-EC

FR-F746-00250-EC

FR-F746-00310-EC

FR-F746-00380-EC

FR-F746-00470-EC

FR-F746-00620-EC

FR-F746-00770-EC

FR-F746-00930-EC

FR-F746-01160-EC

17

25

31

38

5.2

8.3

12.6

47

62

77

93

116

120 % overload capacity*

Rated current

(A)

Rated motor capacity

(kW)

2.3

3.8

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

2.1

3.5

16

23

29

35

150 % overload capacity**

Rated current

(A)

Rated motor capacity

(kW)

4.8

7.6

11.5

43

57

70

85

106

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

* 120 % for 3 s, 110 % for 60 s, up to 30 °C ** 150 % for 3 s, 120 % for 60 s, up to 40 °C

Operating conditions Specifications

Voltage

Ambient temperature in operation

Storage temperature

Ambient humidity

Altitude

Protection rating

Shock resistance

Vibration resistance

Certifications

Three-phase, 380 – 500 V (-15 %/+10 %)

(below 75 kW to 480 V)

FR-F 740: -10 °C to +50 °C;

FR-F 746: -10 °C to +40 °C

-20 °C to +65 °C

Max. 90 % relative humidity (non-condensing)

Max. 1,000 m above sea level

F740: IP00 from 30 kW, IP20 up to 22 kW;

F746: IP54

10 G (for 00023 to 03610); 0.3 G (for ≤ 04320)

Max. 0.6 G

FR-F740: CE/UL/cUL/GOST

FR-F746: CE/GOST

EUROPEAN BRANCHES

MITSUBISHI ELECTRIC EUROPE B.V.

25,Boulevard des Bouvets

F-92741 Nanterre Cedex

Phone +33 (0) 1 55 68 55 68

MITSUBISHI ELECTRIC EUROPE B.V.

Gothaer Straße 8

D-40880 Ratingen

Phone +49 (0) 21 02/4 86-0

MITSUBISHI ELECTRIC EUROPE B.V.

Westgate Business Park, Ballymount

IRL-Dublin 24

Phone +353-1 / 4 50 50 07

MITSUBISHI ELECTRIC EUROPE B.V.

Via Paracelso 12

I-20041 Agrate Brianza (MI)

Phone +39 (0) 3 96 05 31

MITSUBISHI ELECTRIC EUROPE B.V.

Carretera de Rubi,76-80

E-08190 Sant Cugat del Vallés

Phone +34 93/5 65 31 60

MITSUBISHI ELECTRIC EUROPE B.V.

Travellers Lane

GB-Hatfield Herts. AL10 8 XB

Phone +44 (0) 1707/27 61 00

FRANCE

GERMANY

IRELAND

ITALY

SPAIN

UK

EUROPEAN REPRESENTATIVES

GEVA GmbH

Wiener Straße 89

AUSTRIA

AT-2500 Baden

Phone +43 (0) 2252 / 85 55 20

TEHNIKON

Oktjabrskaya 16/5,AP 704

BELARUS

BY-220030 Minsk

Phone +375 (0)17 / 2104626

Koning & Hartman b.v.

Pontbeeklaan 43

BE-1731 Brussels

Phone +32 (0) 2 / 467 17 44

BELGIUM

TELECON CO.

4,A.Ljapchev Blvd.

BULGARIA

BG-1756 Sofia

Phone +359 (0)2 / 97 44 058

AutoCont

Nemocnicni 12

CZECH REPUBLIC

CZ-70200 Ostrava 2

Phone +420 59 / 6152 111 louis poulsen

Geminivej 32

DK-2670 Greve

Phone +45 (0)43 / 95 95 95

DENMARK

UTU ELEKTROTEHNIKA

Pärnu mnt.160i

EE-11317 Tallinn

Phone +372 (0)6 / 51 72 80

ESTONIA

UTU POWEL OY

Box 236

FIN-28101 Pori

Phone +358 (0)2 / 550 800

FINLAND

UTECO A.B.E.E.

5,Mavrogenous Str.

GREECE

GR-18542 Piraeus

Phone +302 (0) 10 / 4 21 00 50

MeltradeAutomatika

55,Harmat St.

HUNGARY

HU-1105 Budapest

Phone +36 (0) 1 / 2 60 56 02

SHERF Motion Techn.LTD

Rehov Hamerkava 19

IL-58851 Holon

Phone +972 (0)3 / 559 54 62

ISRAEL

Kazpromautomatics Ltd.

KAZAKHSTAN

2,Scladskaya Str.

KAZ-470046 Karaganda

Phone +7 3212 50 11 50

POWEL SIA

Lienes iela 28

LV-1009 Riga

Phone +37 17 84 / 22 80

LATVIA

UAB UTU POWEL

Savanoriu Pr.187

LITHUANIA

LT-2053 Vilnius

Phone +370 (0) 52 32 3-1 01

INTEHSIS SRL

Cuza-Voda 36/1-81

MOLDOVA

MD-2061 Chisinau

Phone +373 (0) 2 / 56 22 63

Koning & Hartman b.v.

Donauweg 2 B

NETHERLANDS

NL-1000 AK Amsterdam

Phone +31 (0)20 / 587 76 00

Motion Control

Markenweg 5

NETHERLANDS

NL-7051 HS Varsseveld

Phone +31 (0)315 / 257 260

NORWAY Beijer Electronics AS

Teglverksveien 1

NO-3002 Drammen

Phone +47 (0) 32 / 24 30 00

MPL Technology ul.Sliczna 36

POLAND

PL-31-444 Kraków

Phone +48 (0) 12 / 6 32 28 85

Sirius Trad.& Serv.

Str.Biharia Nr.67-77

ROMANIA

RO-013981 Bucuresti 1

Phone +40 (0) 21 / 2 01 1146

AutoCont Control

Radlinského 47

SK-02601 Dolný Kubín

Phone +421 435868210

SLOVAKIA

INEA d.o.o.

Stegne 11

SLOVENIA

SI-1000 Ljubljana

Phone +386 (0) 1 / 5 13 81 00

Beijer Electronics AB

Box 426

S-20124 Malmö

Phone +46 (0) 40 / 35 86 00

SWEDEN

ECONOTEC AG SWITZERLAND

Postfach 282

CH-8309 Nürensdorf

Phone +41 (0) 44 / 8 38 48 11

GTS

Darülaceze Cad.No.43A KAT:2

TURKEY

TR-80270 Okmeydani-Istanbul

Phone +90 (0) 212 / 3 20 16 40

RUSSIA Avtomatika Sever Ltd.

Lva Tolstogo Str.7,Off.311

RU-197376 St Petersburg

Phone +7 812 / 718 32 38

RUSSIA CONSYS

Promyshlennaya St.42

RU-198099 St Petersburg

Phone +7 812 / 325 3653

Electrotechnical

Shetinkina St.33,Office 116

RU-630088 Novosibirsk

Phone +7 3832 / 11 95 98

RUSSIA

ELEKTROSTYLE RUSSIA

Krasnij Prospekt 220-1,Office 312

RU-630049 Novosibirsk

Phone +7 3832 / 10 6618

RUSSIA ELEKTROSTYLE

Poslannikov Per., 9,Str.1

RU-107005 Moscow

Phone +7 095 / 542-4323

ICOS RUSSIA

Ryazanskij Prospekt,8A,Office 100

RU-109428 Moscow

Phone +7 095 / 232 0207

RUSSIA STC Drive Technique

Poslannikov per., 9,str.1

RU-107005 Moscow

Phone +7 095 / 786 21 00

CSC Automation Ltd UKRAINE

15,M.Raskova St.,Fl.10,Off.1010

UA-02002 Kiev

Phone +380 (0)44 / 494 33 55

CBI Ltd

Private Bag 2016

SOUTH AFRICA

ZA-1600 Isando

Phone +27 (0) 11 / 9 28 20 00

MITSUBISHI

ELECTRIC

FACTORY AUTOMATION

Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany

Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-486112 /// [email protected] /// www.mitsubishi-automation.com

Specifications subject to change /// Art. no. 166394-B /// 01.2006

Frequency Inverters

One-touch Digital Dial control and multi-language display for simple configuration and user-friendly operation.

IP00, IP20 and IP54 protection ratings, wide range of outputs from 0.75 to 630 kW

Extremely high quality for exceptional reliability

Comprehensive support for communications and worldwide network standards including LonWorks and Profibus

Ventilation and air extraction systems generally require very powerful motors. The intelligent motor control functions of the

FR-F740/746 series reduce starting currents and thus also the peak load power costs.

Similarly, the system also cuts costs in low load operation.

Complex HVAC building services automation solutions

A 110 kW air extraction system

Today’s innovative building services impose a wide variety of demands on drive system planners. More and more applications require open, flexible and fullyscaleable drives. In applications like heating, ventilation and air-conditioning (HVAC) there are additional demands that must be met, including user-friendliness, network support and, of course, maximum reliability. The drives must also be economical, with minimum operating costs and maximum energy savings.

The frequency inverters of the FR-F740/

746 series are a modern and intelligent variable-speed drive solution that can easily be integrated into modern building services automation systems. The FR-F740/

746 series is particularly well suited for driving pumps and fans and for applications with reduced overloads, including:

쐽 Air conditioning systems in buildings and industry

쐽 Ventilation and air extraction fans

쐽 Drains systems, ground water pumps and heat pumps

These inverters achieve massive power savings, particularly in the crucial low speed range and the braking and acceleration phases. For example, at a frequency of 35 Hz the inverter achieves a saving of 57 % over conventional solutions.

Damper control (conventional)

100

90

80

70

60

50

40

30

20

10

0

Conserved energy

0 40 60

Inverter control

80 100

Power savings in relation to air throughput volume

Additional power savings of 10 % are achieved by Mitsubishi Electric’s innovative

OEC (Optimum Excitation Control) technology, which ensures that the optimum flux is applied to the motor at all times.

With their multi-motor function the FR-F

740/746 inverters can autonomously integrate up to four motors in a pump system, using preset setpoint values. In this system one motor is frequency-controlled by the

FR-F740/746 whilst the others are automatically switched in to or out of the network in stages. This highly-effective motor management is really useful in water supply systems requiring fast and flexible responses (e.g. for catering to sudden fluctuations in the demand for water).

Pump system

Control unit FR-DU07

A combination of many intelligent design features and newly developed components (including the fans and capacitors) have increased the service life of the

FR-F740/746 to over 10 years. An automatic warning is displayed when the end of the service life is approaching, so that you can avoid unexpected failures.

The cooling fans are compact units that can easily be removed for cleaning or replacement. The terminal blocks are removable, so that the frequency inverters can be replaced without re-wiring in the rare event of a failure.

The integrated one-touch Digital Dial gives you much faster access to all the important parameters than would be possible using conventional control keys.

The removable FR-DU07 control unit makes operating the inverter simple and intuitive. A 4-digit LED display enables you to check and edit settings, and it is also used for monitoring operating status and displaying alarms. It is possible to monitor all the inverter and motor status parameters and any error code displays enabling rapid commissioning and troubleshooting for users. The control unit can also be used to adjust the speed of the connected motor continuously and directly

In addition to the IP00 and IP20 protection ratings the inverters in the output range up to 55 kW are also available with an IP54, splash and spray rating (FR-F746 series).

These rugged metal chassis units have dust, dirt and water protection making it possible to install them without an external cabinet, for example on the outside wall of the factory building or next to a ventilation or air conditioning system.

IMS certificate

Mitsubishi Electric’s drive systems have an enviable reputation for reliability. The recent customer satisfaction survey conducted by IMS Research confirmed that the inverter drives made by Mitsubishi Electric are among the best in their class.

The FR-F740/746 inverters are fitted with two serial ports as standard for integration in automation networks. A network cable can be connected to the PU interface with a standard RJ45 plug and there are RS485 terminals inside the inverter for connection to a multidrop network, enabling inexpensive network connection of up to 32 nodes.

In addition to the Mitsubishi network protocol you can also set Modbus-RTU (binary) as the standard protocol.

The inverters can be connected to all the following networks:

쐽 LonWorks*

쐽 Profibus/DP*

쐽 DeviceNet*

쐽 Modbus RTU*

쐽 RS-485*

쐽 CC-Link*

*optional

Fan

MITSUBISHI

FREQROL-F700

Hz MON P.RUN

PU EXT FWD NET

PU

REV

REV FWD

EXT

MODE SET STOP

RESET

FR-DU07

DANGER: Risk of in jury and electric sho tructions before use.

Isolate from supply and wait 10 minutes befo

Ensure proper earth

CAUTION: Risk of fire re removing this cove

Mount the inverter on connection a non-combustible s urface.

FR–F740–2.2K

400V

L

ON

W

PC

ORKS

NETWORK

Pump

MITSUBISHI

FREQROL-F700

Hz MON P.RUN

PU EXT FWD NET

REV

PU REV FWD

EXT

MODE SET STOP

RESET

FR-DU07

DANGER: Risk of injur

Isolate from supply and y and electric shock wait 10 minutes befo ructions before use.

re removing this cove

Ensure proper earth

CAUTION: Risk of fi

Mount the inverter o re connection n a non-combustible surface.

FR–F740–2.2K

400V

Security system

Lighting

The FR-F740/F746 in a LonWorks network system

Frequency inverter FR-F746

Ventilation and air extraction systems generally require very powerful motors. The intelligent motor control functions of the

FR-F740/746 series reduce starting currents and thus also the peak load power costs.

Similarly, the system also cuts costs in low load operation.

Complex HVAC building services automation solutions

A 110 kW air extraction system

Today’s innovative building services impose a wide variety of demands on drive system planners. More and more applications require open, flexible and fullyscaleable drives. In applications like heating, ventilation and air-conditioning (HVAC) there are additional demands that must be met, including user-friendliness, network support and, of course, maximum reliability. The drives must also be economical, with minimum operating costs and maximum energy savings.

The frequency inverters of the FR-F740/

746 series are a modern and intelligent variable-speed drive solution that can easily be integrated into modern building services automation systems. The FR-F740/

746 series is particularly well suited for driving pumps and fans and for applications with reduced overloads, including:

쐽 Air conditioning systems in buildings and industry

쐽 Ventilation and air extraction fans

쐽 Drains systems, ground water pumps and heat pumps

These inverters achieve massive power savings, particularly in the crucial low speed range and the braking and acceleration phases. For example, at a frequency of 35 Hz the inverter achieves a saving of 57 % over conventional solutions.

Damper control (conventional)

100

90

80

70

60

50

40

30

20

10

0

Conserved energy

0 40 60

Inverter control

80 100

Power savings in relation to air throughput volume

Additional power savings of 10 % are achieved by Mitsubishi Electric’s innovative

OEC (Optimum Excitation Control) technology, which ensures that the optimum flux is applied to the motor at all times.

With their multi-motor function the FR-F

740/746 inverters can autonomously integrate up to four motors in a pump system, using preset setpoint values. In this system one motor is frequency-controlled by the

FR-F740/746 whilst the others are automatically switched in to or out of the network in stages. This highly-effective motor management is really useful in water supply systems requiring fast and flexible responses (e.g. for catering to sudden fluctuations in the demand for water).

Pump system

Control unit FR-DU07

A combination of many intelligent design features and newly developed components (including the fans and capacitors) have increased the service life of the

FR-F740/746 to over 10 years. An automatic warning is displayed when the end of the service life is approaching, so that you can avoid unexpected failures.

The cooling fans are compact units that can easily be removed for cleaning or replacement. The terminal blocks are removable, so that the frequency inverters can be replaced without re-wiring in the rare event of a failure.

The integrated one-touch Digital Dial gives you much faster access to all the important parameters than would be possible using conventional control keys.

The removable FR-DU07 control unit makes operating the inverter simple and intuitive. A 4-digit LED display enables you to check and edit settings, and it is also used for monitoring operating status and displaying alarms. It is possible to monitor all the inverter and motor status parameters and any error code displays enabling rapid commissioning and troubleshooting for users. The control unit can also be used to adjust the speed of the connected motor continuously and directly

In addition to the IP00 and IP20 protection ratings the inverters in the output range up to 55 kW are also available with an IP54, splash and spray rating (FR-F746 series).

These rugged metal chassis units have dust, dirt and water protection making it possible to install them without an external cabinet, for example on the outside wall of the factory building or next to a ventilation or air conditioning system.

IMS certificate

Mitsubishi Electric’s drive systems have an enviable reputation for reliability. The recent customer satisfaction survey conducted by IMS Research confirmed that the inverter drives made by Mitsubishi Electric are among the best in their class.

The FR-F740/746 inverters are fitted with two serial ports as standard for integration in automation networks. A network cable can be connected to the PU interface with a standard RJ45 plug and there are RS485 terminals inside the inverter for connection to a multidrop network, enabling inexpensive network connection of up to 32 nodes.

In addition to the Mitsubishi network protocol you can also set Modbus-RTU (binary) as the standard protocol.

The inverters can be connected to all the following networks:

쐽 LonWorks*

쐽 Profibus/DP*

쐽 DeviceNet*

쐽 Modbus RTU*

쐽 RS-485*

쐽 CC-Link*

*optional

Fan

MITSUBISHI

FREQROL-F700

Hz MON P.RUN

PU EXT FWD NET

PU

REV

REV FWD

EXT

MODE SET STOP

RESET

FR-DU07

DANGER: Risk of in jury and electric sho tructions before use.

Isolate from supply and wait 10 minutes befo

Ensure proper earth

CAUTION: Risk of fire re removing this cove

Mount the inverter on connection a non-combustible s urface.

FR–F740–2.2K

400V

L

ON

W

PC

ORKS

NETWORK

Pump

MITSUBISHI

FREQROL-F700

Hz MON P.RUN

PU EXT FWD NET

REV

PU REV FWD

EXT

MODE SET STOP

RESET

FR-DU07

DANGER: Risk of injur

Isolate from supply and y and electric shock wait 10 minutes befo ructions before use.

re removing this cove

Ensure proper earth

CAUTION: Risk of fi

Mount the inverter o re connection n a non-combustible surface.

FR–F740–2.2K

400V

Security system

Lighting

The FR-F740/F746 in a LonWorks network system

Frequency inverter FR-F746

Frequency inverter

FR-F740

FR-F740-00023-EC

FR-F740-00038-EC

FR-F740-00052-EC

FR-F740-00083-EC

FR-F740-00126-EC

FR-F740-00170-EC

FR-F740-00250-EC

FR-F740-00310-EC

FR-F740-00380-EC

FR-F740-00470-EC

FR-F740-00620-EC

FR-F740-00770-EC

FR-F740-00930-EC

FR-F740-01160-EC

FR-F740-01800-EC

FR-F740-02160-EC

FR-F740-02600-EC

FR-F740-03250-EC

FR-F740-03610-EC

FR-F740-04320-EC

FR-F740-04810-EC

FR-F740-05470-EC

FR-F740-06100-EC

FR-F740-06830-EC

FR-F740-07700-EC

FR-F740-08660-EC

FR-F740-09620-EC

FR-F740-10940-EC

FR-F740-12120-EC

120 % overload capacity*

Rated current

(A)

Rated motor capacity

(kW)

2.3

3.8

5.2

8.3

12.6

17

25

31

38

47

62

77

93

116

180

216

260

325

361

432

481

547

610

683

770

866

962

1094

1212

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

90

110

132

160

185

220

250

280

315

355

400

450

500

560

630

* 120 % for 3 s, 110 % for 60 s, up to 40 °C ** 150 % for 3 s, 120 % for 60 s, up to 50 °C

325

361

432

481

547

144

180

216

260

610

683

770

866

962

1094

57

70

85

106

11.5

16

23

29

35

43

2.1

3.5

4.8

7.6

150 % overload capacity**

Rated current

(A)

Rated motor capacity

(kW)

0.75

1.5

2.2

3.7

30

37

45

55

5.5

7.5

11

15

18.5

22

160

185

220

250

280

75

90

110

132

315

355

400

450

500

560

Frequency inverter

FR-F746

FR-F746-00023-EC

FR-F746-00038-EC

FR-F746-00052-EC

FR-F746-00083-EC

FR-F746-00126-EC

FR-F746-00170-EC

FR-F746-00250-EC

FR-F746-00310-EC

FR-F746-00380-EC

FR-F746-00470-EC

FR-F746-00620-EC

FR-F746-00770-EC

FR-F746-00930-EC

FR-F746-01160-EC

17

25

31

38

5.2

8.3

12.6

47

62

77

93

116

120 % overload capacity*

Rated current

(A)

Rated motor capacity

(kW)

2.3

3.8

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

2.1

3.5

16

23

29

35

150 % overload capacity**

Rated current

(A)

Rated motor capacity

(kW)

4.8

7.6

11.5

43

57

70

85

106

0.75

1.5

2.2

3.7

5.5

7.5

11

15

18.5

22

30

37

45

55

* 120 % for 3 s, 110 % for 60 s, up to 30 °C ** 150 % for 3 s, 120 % for 60 s, up to 40 °C

Operating conditions Specifications

Voltage

Ambient temperature in operation

Storage temperature

Ambient humidity

Altitude

Protection rating

Shock resistance

Vibration resistance

Certifications

Three-phase, 380 – 500 V (-15 %/+10 %)

(below 75 kW to 480 V)

FR-F 740: -10 °C to +50 °C;

FR-F 746: -10 °C to +40 °C

-20 °C to +65 °C

Max. 90 % relative humidity (non-condensing)

Max. 1,000 m above sea level

F740: IP00 from 30 kW, IP20 up to 22 kW;

F746: IP54

10 G (for 00023 to 03610); 0.3 G (for ≤ 04320)

Max. 0.6 G

FR-F740: CE/UL/cUL/GOST

FR-F746: CE/GOST

Frequency Inverters

MITSUBISHI

ELECTRIC

FACTORY AUTOMATION

MITSUBISHI

ELECTRIC

FACTORY AUTOMATION

Specifications subject to change /// Art. no. 166394-B /// 01.2006

One-touch Digital Dial control and multi-language display for simple configuration and user-friendly operation.

IP00, IP20 and IP54 protection ratings, wide range of outputs from 0.75 to 630 kW

Extremely high quality for exceptional reliability

Comprehensive support for communications and worldwide network standards including LonWorks and Profibus

advertisement

Key Features

  • One-touch Digital Dial control
  • Multi-language display
  • IP00, IP20 and IP54 protection ratings
  • Outputs from 0.75 to 630 kW
  • LonWorks and Profibus communication support

Related manuals

Frequently Answers and Questions

What are the operating conditions for the FR-F740/F746 series?
The operating voltage is three-phase, 380 – 500 V (-15 %/+10 %) for models below 75 kW and 480 V for models above 75 kW. The ambient temperature in operation is -10 °C to +50 °C for the FR-F740 series and -10 °C to +40 °C for the FR-F746 series. The storage temperature is -20 °C to +65 °C. The ambient humidity is Max. 90 % relative humidity (non-condensing). The altitude is Max. 1,000 m above sea level.
What are the protection ratings of the FR-F740/F746 series?
The FR-F740 series has a protection rating of IP00 from 30 kW and IP20 up to 22 kW. The FR-F746 series has a protection rating of IP54.
What are the certifications for the FR-F740/F746 series?
The FR-F740 series is CE/UL/cUL/GOST certified. The FR-F746 series is CE/GOST certified.
What are the shock resistance and vibration resistance specifications?
The shock resistance for models 00023 to 03610 is 10 G, and 0.3 G for models ≤ 04320. The maximum shock resistance is 0.6 G. The vibration resistance is Max. 0.6 G.
Download PDF

advertisement