Bang & Olufsen Beocenter 1 User manual
Bang & Olufsen Beocenter 1 is a versatile entertainment system that combines TV, radio, DVD, and audio playback in one sleek unit. With its built-in speakers and the ability to connect additional speakers, you can enjoy high-quality sound for your movies, music, and TV shows. You can effortlessly switch between sources using the included Beo4 remote control, which also lets you adjust volume, change channels, and navigate menus. Beocenter 1 also features a range of connectivity options, including HDMI, RCA, and USB, making it easy to integrate with your existing home entertainment system.
Advertisement
Advertisement
BeoCenter 1
Guide
Contents of the Guide
The following is an index to the contents of the separate Reference book with page references:
• How to set up BeoCenter 1, 4
• Connect your TV cables, 5
• Connect a video tape recorder, 6
• Connect a decoder, 7
• Connect a set-top box, 8
• Socket panel on the rear, 9
• Audio system with BeoCenter 1, 10
• Distribute sound and pictures with
BeoLink, 12
• Set up BeoCenter 1 in a link room, 14
• First-time setup of BeoCenter 1, 16
• Register extra equipment, 18
• Edit tuned programs, 20
• Re-tune or add programs, 26
• Settings for TV position, 28
• Choose menu language, 29
• Adjust sound settings, 30
• Adjust picture settings, 32
• Set the time and date, 33
• DVD – Personal Preferences, 34
• DVD – Access Control, 36
• Switch BeoCenter 1 on or off automatically, 40
• The PIN-code system, 42
• Looking after BeoCenter 1, 44
• Close-up operation and socket panel, 45
• If you have a BeoCord V 8000 video tape recorder…, 46
• If you have a Set-top Box Controller…, 50
• For your information…, 54
Your key to using BeoCenter 1
4 Using the Beo4 remote control
5 Use the menus
5 Use the display below the screen
Watch television
6 Step through tuned programs
6 See list of all programs
7 Adjust the picture format
7 Turn Beocenter 1 to the left or right
Adjust sound
8 Adjust or mute the sound
8 Change sound type or language
9 Adjust speaker balance and choose speaker combination
Look up Teletext information
10 Navigate in Teletext
11 Create or delete MEMO pages
11 Use MEMO pages
Use program Groups
12 Select programs in a Groups
12 Create Groups
13 Move programs within a Groups
Use the DVD player
14 Disc loading and playback
15 When playing an audio CD…
15 When playing a DVD…
15 The DVD disc menu
The tool bar on the screen
16 The tool bar
17 The tool bar symbols
18 How to use the tool bar
Use the radio
20 Listen to tuned programs
20 See list of all programs
3
4
Your key to using BeoCenter 1
Using the Beo4 remote control
Look through the basic principles of the Beo4 remote control and try them out. Each button is explained below.
Refer to Beo4’s own Guide for information about how to add extra functions to those shown in the Beo4 display.
Switch on to TV programs
Switch on a connected source and the
BeoCenter 1 to watch e.g. set-top box (STB) programs or videotapes
Use the number keys to select programs,
Teletext pages, DVD chapters and titles, and
CD tracks
Enter information in on-screen menus. Press ss or tt while e.g. TV is on to select a program
Group you have created
Press to select a subtitle language*
Press to select another audio language*
Press GO to call up a menu or store settings, press and hold to call up program lists, or a
DVD disc menu
Step up or down through programs, menu items or DVD chapters
Reveal additional functions in the Beo4 display, e.g. FORMAT
TV
SAT
V TAPE
0 – 9 ss tt
GO
▲
▼
LIST
TV LIGHT RADIO
SAT DVD CD
V TAPE RECORD A TAPE
1
TEXT
7
4
2
0
8
5
9
6
3
MENU
GO
TV
FORMAT
RADIO
DVD
MENU
TEXT
∧
∨
EXIT
•
The Beo4 display shows the source you have selected, or extra functions available when you press the LIST button
Press RADIO to switch on and operate the radio
Switch on DVD and play a loaded disc
Press MENU to call up the main SETUP menu.
If you have selected STB as your source, pressing MENU calls up the Set-top Box
Controller menu. Press MENU a second time for the main SETUP menu
Press to call up Teletext
Press to bring up the DVD disc menu
Press to bring up the DVD on-screen tool bar
Adjust volume – press the middle to mute sound
Exit on-screen menus
Switch BeoCenter 1 to standby
LIST
STOP
EXIT
*NOTE! Alternative subtitle and audio languages are only available on some discs.
Use the menus
The menus on the BeoCenter 1 screen gives you access to a number of different options.
When you enter the menu system, the first available menu is the SETUP menu.
Menu name
Menu options
Option contents
Information field
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
EDIT PROGRAM
TV TUNING
EDIT PROGRAMS
ADD PROGRAM
AUTO TUNING
MANUAL TUNING
LINK FREQUENCY back select
GO back select GO
TV
MENU
▲
▼ ss tt
GO
EXIT
Press to switch on the television
Press to call up the TV SETUP menu
Press to move between the different menu options
Press to reveal different settings
Press to call up a menu or store a setting you have made
Press to leave the menu system
The display below the screen
When you choose a source, such as TV, or a function, such as Teletext, the display changes accordingly as you make your selections.
5
T V
6
Watch television
You can find a TV program which is tuned into your BeoCenter 1 in four ways…
– By stepping through all tuned programs;
– By using the number keys to key in the number of the program you want;
– By calling up a program list of all the tuned programs;
– By selecting a program Group.
Refer to the chapter Use program
Groups for more information.
While watching television you can also adjust picture format and turn the BeoCenter 1 to the left or right.
Step through tuned programs
To start watching television, press TV on the
Beo4 remote control. The television automatically switches on to the last program you watched.
See list of all programs
Choose a source, for example TV, and press and hold GO on the Beo4 remote control to call up a complete list of the available TV programs. You can also call up a program list for Groups of programs.
TV
▲
▼
0 – 9
Press to switch on BeoCenter 1
Press
▲ or through the available TV programs
▼ to step up or down
Key in the number of the TV program you want
TV
BBC
GO
▲
▼
Press to switch on the television
Press and hold to call up the TV program list
Step up or down through the available programs
Press to call up the chosen program, or…
SAT
Press another source button, e.g.
SAT, to switch to set-top box programs
Pressing 0 will swap between the current and previous TV programs.
GO
0 – 9
Call up the program list for a specific Group…
TV
Press to switch on the television
BBC ss tt
MY GROUP
Press ss or tt repeatedly to step through your Groups
GO
key in the number of the program you want to see
Press to call up the chosen
Group
GO
ss tt
Press and hold to call up the program list for this Group
Press ss or tt to see the program lists for all the other Groups
NOTE! Refer to the separate Reference book for information about how to tune in TV programs.
STB programs are only available if BeoCenter 1 is equipped with a built-in Set-top Box Controller and a set-top box is connected.
Adjust the picture format
The picture format you choose is changed on the screen accordingly, either to a 16:9 widescreen picture or a standard 4:3 picture. The picture format you choose is not stored, when you switch to a different program or switch off BeoCenter 1, the standard 4:3 picture format is restored.
Turn BeoCenter 1 to the left or right
If your BeoCenter 1 is equipped with the motorised stand, you can turn BeoCenter 1 to the left or to the right via Beo4. You can also turn BeoCenter 1 manually.
TV PROGRAM LIST
1 DR2
2 TV2
3 . . . . . . . .
4 EUROSPRT
5 ZDF
6 RTL7
7 . . . . . . . .
8 BBC
9 . . . . . . . .
10 . . . . . . . .
11 . . . . . . . .
12 CNN
13 N3
14 . . . . . . . .
17 NRK
18 TV4 more select
GO
The program list for TV is now called up. It provides you with an overview of all your available
TV programs.
LIST
FORMAT
1 – 2
Press repeatedly until FORMAT appears in the Beo4 display
Press 1 or 2 to select a picture format: FORMAT 1 for a 4:3 picture, or FORMAT 2 for a 16:9 picture
LIST
STAND ss tt
Press repeatedly until STAND appears in the Beo4 display
Press to turn BeoCenter 1 either to the left or the right, or
1 – 9 use the number keys to choose a pre-defined position;
1 represents the outmost left position, 9 represents the outmost right position
Refer to ‘Settings for TV position’ in the separate
Reference book for more information about how to preset viewing positions for BeoCenter 1.
DR2
TV2
EUROSPRT
ZDF
RTL7
BBC
CNN
NEWS group select GO
Groups list… TV programs selected for a Group
also appear in the program lists for all tuned TV programs.
7
NOTE! When Beo4 is in radio mode, you cannot call up STAND in the Beo4 display.
8
Adjust sound
Several sound adjustments possibilities are available in your
BeoCenter 1.
You can always adjust the volume or mute the sound completely.
If programs are broadcasted with different sound types or languages, you can choose between them.
If speakers are connected to your
BeoCenter 1, you are free to choose the speaker combination you prefer.
When you switch on BeoCenter 1 or one of the sources connected to it, the speakers you may have connected, can be cut in or out, depending on what kind of sound suits the source you are using.
Adjust or mute the sound
While you are watching television, you can adjust the sound volume at any time or mute the sound completely.
Change sound type or language
If different sound types or languages are available, you can store your favourite sound type when tuning in your TV programs.
However, it is also possible to choose between sound types or languages when watching a program.
∧
∨
VOL 26
∧
∨
MUTE
∧
∨
Press
∧ or
∨ to adjust the volume up or down
Press in the middle of the
∧ and
∨ button to mute the sound
LIST
SOUND
GO
MONO
Press repeatedly until SOUND* is shown in the Beo4 display
Press to see the current sound type on your screen
Press
∧ or
∨ again to bring the sound back
GO
STEREO
Press repeatedly to switch to another sound type or language in a multi-language programme
Press to exit the SOUND function
EXIT
*In order to display SOUND on Beo4, you must first add it to the Beo4 list of functions. Refer to
Beo4’s own Guide for further information.
Adjust speaker balance and choose speaker combination
When you connect loudspeakers to your
BeoCenter 1, you can adjust speaker balance and choose a speaker combination at any time.
LIST
SPEAKER ss tt
1 – 3
EXIT
Press repeatedly until SPEAKER is shown in the Beo4 display
Press to adjust the balance between the left and right speakers
Press to select a speaker combination
Press to exit the SPEAKER function
Speaker combinations
SPEAKER 1
Sound in the television speakers only. For programmes with dialogue, e.g. TV news.
SPEAKER 2
Stereo sound in the two external front speakers.
The BeoLab 2 subwoofer is active. For music
CDs.
SPEAKER 3
The television speakers, external front speakers and the BeoLab 2 subwoofer are active. For TV programmes in stereo.
Refer to the chapter Adjust sound settings in the separate Reference book for further information on presetting a speaker combination.
9
NOTE! Refer to the chapter Socket panel on the
rear in the separate Reference book for more information about how to connect speakers to
BeoCenter 1 and to the Guide supplied with the surround sound module for information on surround sound.
10
Look up Teletext information
Teletext offers you a wealth of information. BeoCenter 1 helps you find it fast.
The arrow keys on Beo4, the menu bar at the top of the screen and the highlighted cursor help you move to the page you want in a single step.
When you get there, you can pause the turning of subpages to read them at your own pace.
BeoCenter 1 can remember your favourite pages, bring you back to the previous page, reveal hidden messages or help you switch to another program’s Teletext service.
Via the SETUP feature, you can make as many as 9 favourite MEMO pages on each available Teletext service.
Save a page with Teletext subtitles as
MEMO page number 9, and Teletext subtitles appear automatically when this program is shown.
Navigate in Teletext
Navigate through Teletext pages by using the menu bar at the top of the Teletext page.
PAGE PROGRAM POINT HALT REC SETUP
P100 BBC S100 Ons 13 Oct 12:39:34
PAGE PROGRAM POINT HALT REC SETUP
P100 BBC S100 Ons 13 Oct 12:39:34
Press TEXT to gain access to Teletext and EXIT to leave Teletext.
If you press EXIT and leave Teletext before the page you want is found, the display TEXT advises you when the page is found. Press GO to see the page. Please note that no such notification will appear if you e.g. change programs or leave
Teletext by selecting a new source, such as V.TAPE.
To go back to the previous page…
> When you use POINT to step to another page,
POINT on the menu bar will change to RETURN.
> Press GO while on the new page to go back to the previous page.
RETURN will only bring you one step back. Go back to other previously viewed pages by using the PAGE or MEMO functions.
To move to a new page…
> Key in the number of the page you wish to see, or…
> press ss to move the highlighted cursor to
PAGE.
> Press
▲ or
▼ to step between pages, and hold to step faster.
> Pressing GO steps to index pages (100, 200,
300, etc.).
To move to another Teletext service…
> Press tt to move the highlighted cursor to
PROGRAM.
If MEMO pages have been created, MEMO will be highlighted when you switch on Teletext.
Press
▲ or
▼ while MEMO is highlighted to find PROGRAM.
> Press GO to call up a program list.
> Press
▲ or
▼ to find a desired program.
> Press GO to switch to another Teletext service.
To switch using visible page references…
> Press tt to move the cursor on the bar to POINT.
> Press GO or
▼ to place the cursor on the page.
> Move the cursor via the arrow keys to a page reference and press GO.
Create or delete MEMO pages
Your most frequently viewed Teletext pages can be saved as MEMO pages, making them easier to call up when viewing a Teletext service. You can save 9 favourite MEMO pages.
Use MEMO pages
If you have made favourite MEMO pages, you can step between them directly.
PAGE MEMO1 POINT REC
P100 BBC S100 Ons 13 Oct 12:39:34
PAGE MEMO2 POINT REC
P100 BBC S100 Ons 13 Oct 12:39:34
11
To stop subpages from turning…
> Press STOP to stop subpages from turning, or…
> move the cursor to HALT and press GO. HALT will be replaced by a set of four digits.
> Use
▼ and
▲ to step to the subpage you wish to see, or key in its number.
> Press GO to restart page turning.
To reveal hidden messages and the like…
> Move the cursor on the bar to t
.
> Press GO to change SETUP to REVEAL.
> Press GO again to reveal hidden text on the current page.
To create a MEMO page…
> Find a page you view often.
> Press ss or tt to move the cursor along the menu bar to SETUP and press GO. The 9 available MEMO slots are shown by number.
The first is highlighted.
> Press GO to store the current page. The cursor moves to the next available MEMO slot.
> Use the number keys on Beo4 to select the next teletext page you wish to store.
> Repeat the procedure for each page you wish to store.
> To leave the MEMO setup, press ss or tt to move the cursor to BACK and press GO.
To view MEMO pages…
> Press TEXT to call up Teletext.
> Press
▲ or
▼ to move between MEMO pages.
> Press EXIT to leave Teletext.
If you would like available Teletext subtitles to appear automatically for a particular program, store the Teletext subtitles page as MEMO page 9.
To delete a MEMO page…
> Press ss or tt to move the cursor to SETUP and press GO.
> Move the cursor to the MEMO page you wish to delete and press the yellow button.
> Press the yellow button again to confirm.
12
Use program Groups
If you have stored a lot of programs and want to get to your favourites quickly without going through the list each time, put them in a Group.
You no longer need to step through programs you do not use.
Name the Groups after the people who watch them – ‘Dad’ or ‘Mary’ – or according to the types of programs included, like ‘News’ or
‘Sports’.
When you have created and selected a particular Group, you only step through the TV or STB* programs belonging to this particular Group.
Switch to a different Group to watch a different set of programs or switch from GROUPS to TV to see all the tuned TV programs.
Select programs in a Group
You can gain access to your Groups by activating Groups mode. Press the arrow keys to select the Group you are looking for, then step through the programs in this Group.
Create Groups
It is possible to put together 8 different program Groups in BeoCenter 1, grouped either by user or by program type. Each Group can contain up to 18 programs. ‘Copies’ of the same program can be stored in different
Groups.
TV
Press to switch on the television ss tt
MY GROUP
Move left or right through the different Groups
GO
NEWS
▲
▼
0 – 9
TV 2
BBC
When you find the Group you want, press GO to select your
Group
Step up or down through the programs in that particular
Group, or use the number keys to key in the number of the program you want to see ss tt
SPORT
GO
Move left or right to switch to another Group – and press GO to call it up
Press and hold GO in Groups mode to view a program list for the current Group.
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
. . .
. . .
. . .
. . .
GROUP1
. . .
. . .
. . .
back select GO
PROGRAM GROUPS
PROGRAM GROUPS name move new group create group
GO
A
character next
accept
GO
PROGRAM GROUPS
MY GROUP
. . .
name move
create
GO
COPY TV
1 DR2
2 TV2
3 . . . . . . . .
4 EUROSPORT
5 ZDF
6 ARD
7 . . . . . . . .
. .
. .
15 SAT 1
16 SVT 2
17 NRK
18 TV4
TO MY GROUP
DR2
SKY NEWS
ZDF
RADIO 2
BBC
copy
accept
GO
*NOTE! In order to receive set-top box (STB) programs, your BeoCenter 1 must be equipped with a built-in Set-top Box Controller and a set-top box must be connected.
Move programs within a Group
You can rearrange the order in which your programs appear within a Group and delete programs in a Group.
> Press TV to switch on the television or RADIO to switch on the radio.
> Press MENU to call up the TV SETUP menu.
PROGRAM GROUPS is already highlighted.
> Press GO to call up the PROGRAM GROUPS menu.
> Press
▼ to move the cursor to an empty Group and press the green button to be able to name a new Group.
> Press
▲ or
▼ for characters and ss or tt to move to the next or previous character space.
> Press GO to store the name, and press GO again to be able to copy programs into the new
Group.
> Press
▲ or
▼ to find a program you wish to copy to the new Group.
> Press tt to copy a TV program to your Group.
> Press GO to store your Group.
> Press
▲ to back up through previous menus or press EXIT to exit on-screen menus directly.
Set-top box programs cannot be combined with
TV and radio programs in the same Group. For more information about how to make STB program Groups, please refer to the chapter in the separate Reference book entitled If you have a
Set-top Box Controller.
DR2
TV2
EUROSPRT
ZDF
RTL7
BBC
CNN
NEWS group select GO
> Press TV to switch on the television or RADIO to switch on the radio.
> Press MENU to call up the TV SETUP menu.
PROGRAM GROUPS is already highlighted.
> Press GO to call up the PROGRAM GROUPS menu.
> Press
▼ to highlight a Group and press GO to select it.
> Press
▼ to highlight the program you wish to move or delete.
> Press tt to move the program out of the list and press
▲ or
▼ to move it to the new position.
> Press ss to move the program back into the list, or press the yellow button to delete it. When you delete a program in the list, the remaining programs contract.
> If the program changed places with another program, then move this program to a new position.
> Once you have finished moving or deleting programs in a group, press GO to store it.
13
14
Use the DVD player
BeoCenter 1 allows you to play
DVDs, video CDs and audio CDs.
Loading is done via the LOAD bar below the television screen, and playback functions such as cueing, changing chapters, opening the DVD disc menu, pausing playback and slow motion are performed via the
Beo4 remote control.
When playing an audio CD, the
BeoCenter 1 screen is blank.
DVD loading and playback
Loading a disc in the DVD player is done via the LOAD bar on the close-up operation panel on BeoCenter 1, just below the television screen.
LOAD-bar
Place a disc in the loader so that the side edges of the disc rest on top of the loader’s side pads while the front edge rests under the loader’s front pad.
To load a disc and begin playback…
> Press LOAD on the close-up operation panel.
The loader slides out, and the display window prompts you to load a disc.
> Place a disc in the loader as described to the left.
> Press and hold LOAD. The loader retracts, DVD is activated and playback begins automatically.*
To load a DVD while watching TV or listening to the radio, e.g. for playback at a later point in time, press LOAD once without holding the bar down. The loader retracts.
If you restart playback of a loaded disc after an interruption, BeoCenter 1 will prompt you to resume playback at the point of interruption. A window at the top left corner of the screen shows
RESUME. Press GO to resume playback. Playback begins automatically from the beginning of the disc if GO is not pressed while the window is shown.
*NOTE! If the DVD player can not recognise the format of a loaded disc, the disc is ejected and
DVD LOAD is shown in the display window. This may be due to disc faults such as dust, dirt, fingerprints or scratches. Refer to the chapter
Looking after BeoCenter 1 in the separate
Reference book for more information about handling DVDs.
When playing an audio CD…
You can start or stop playback completely, step between tracks, or cue back and forth at different speeds on a disc via the Beo4 remote control.
When playing a DVD…
You can start or stop playback, step between chapters, or cue back and forth without calling up the DVD on-screen menu.
The DVD disc menu
DVDs may contain particular functions, such as selection of individual scenes or chapters, subtitle language, etc. which are available via a disc menu.
To change tracks on an audio CD…
▲ ▼
DVD - 3
▲ ▼
DVD - 5
1 – 9
STOP
STOP
Press
▲ or
▼ to step to the next or previous track
Press repeatedly to jump to another track on the CD
Enter the track number on Beo4 to step directly to this track
To pause or stop playback of an audio CD…
DVD
Press the DVD button on Beo4 to start playing a CD
Press to pause playback
Press to stop playback completely, or…
To change chapters on a DVD…
GO
▲ ▼
Press GO then
▲ or
▼ to switch to the next or previous chapter
DVD - 1 3
While DVD is selected…
Press the yellow button to bring up the disc menu
GO
▲ ▼
DVD - 1 5
Press GO then
▲ or repeatedly to jump to another chapter on the disc
▼
▲ ss tt
▼
Use the arrow keys to move from function to function on the disc
1 – 9
GO
GO
Press GO twice to enter your choice Enter the chapter number on
Beo4 to step directly to this chapter
To pause or stop playback of a DVD…
DVD
Press the DVD button on Beo4 to start playing a DVD
Some DVDs offer special features which are temporarily available during playback, e.g.
additional film sequences. These functions can be accompanied by a visual cue to let you know when they are available. In such situations, press
GO twice in rapid succession to make a selection.
▲
Press to pause playback
GO
press to resume playback. If playback has been completely stopped, press to restart playback from the beginning
To cue or wind through an audio CD…
ss tt
GO
Press ss or tt to cue back and forth during playback
Press to resume playback
STOP
GO
Press to stop playback completely, or… press to resume playback. If playback has been completely stopped, press to restart playback from the beginning
To cue or wind through a DVD…
ss tt
Press ss or tt to cue back and forth during playback ss tt
GO
Press again to change speed
Press to resume playback
15
NOTE! BeoCenter 1 may be able to playback disc with other files formats. If such a disc is loaded operate the on-screen menu as if a DVD was loaded.
16
The tool bar on the screen
The main functions of the DVD player are accessible via the tool bar along the top of the screen.
The on-screen tool bar gives you quick access to additional DVD functions. Zoom in on a paused screen picture, play in slow motion or start playback from a specific moment in elapsed time.
To find out more about the individual functions and how to use them, refer to the following pages.
The tool bar
Move between the tool bar symbols and see the options for each function. The current settings are shown under the tool bar symbols.
off 3en no st off 1 off 3en st
1
The Feedback window at the far left end of the tool bar informs you of the current status of particular features.
locked safe
The Feedback window
Alternate camera angle in use. This is a disc feature which is only available on certain DVDs.
Parental Control active. Refer to
Access Control on page 36 in the
Reference Book for more information about Parental Control.
To use the tool bar during playback…
> Press the blue button to call up the on-screen tool bar.
> Press ss or tt to move from function to function.
> Press
▲ or
▼ to view setting choices for a particular function
> Use the number keys to select for example specific chapters.
> Press EXIT to remove the on-screen tool bar.
> Press GO to resume playback.
Child safe. The disc has been checked for offensive scenes and deemed suitable for children.
resume
Playback of a disc resumes from the point where playback was previously interrupted.
Action is not valid. Indicates that the function in question cannot be activated at this point in time.
The tool bar symbols
Below is a list of all the symbols on the tool bar and an explanation of the functions each symbol activates. Beo4 shortcuts are also indicated.
User Preferences Settings
You can change settings for picture, sound, language and the Parental Control feature via this menu. Refer to the chapter, Change picture,
sound or language settings, for more information about the User Preferences menu.
Sound mode
You can choose between the different sound modes available on your disc.
Pause
Pauses playback on a particular frame and allows you to move to the previous or following frames.
Subtitle language*
Subtitles in different languages are often available on DVDs. You can choose between the subtitle languages available on your DVD. To change subtitles during playback directly, press the green button on Beo4.
Slow motion
Allows you to slow playback down to a chosen speed.
Fast motion
Allows you to increase playback speed to a chosen level.
Playback language*
The dialogue in a DVD film may be dubbed in several different languages, all stored on the disc.
You can choose between the languages available on your particular disc. To change the playback language during playback directly, press the red button on Beo4.
Camera angle*
It is possible on some DVDs to change to a different camera angle.
Zoom
Allows you to zoom in on a section of the picture, choose the magnification and pan back and forth.
Title number
You can choose between available titles on your disc.
Chapter number
Each chapter in a DVD film consists of one scene, much like individual tracks on an audio CD.
Time search
Allows you to start playback from a point in elapsed time on the disc.
Favourite Track Selection (fts)*
Allows you to identify favourite titles, chapters or tracks on a particular disc and store them in the player’s memory. When the function is activated, you will only see or hear the selected titles, chapters or tracks on this disc when it is played back.
17
*NOTE! If a function is inactive for your player setup, or if the disc does not contain a particular option, the function symbol and current setting will be dimmed, and it will not be possible to access the function.
18
>> The tool bar on the screen
How to use the tool bar functions
First call up the tool bar by pressing the blue button. Once the tool bar is available, refer to the below instructions. They will guide you through all the functions available on the tool bar.
To change subtitle language…
> Press tt to move the cursor to the symbol.
> Press
▼ or
▲ to step between the subtitle languages available on your disc. Playback continues and subtitles change as you move between the options.
To cue forwards or backwards…
> Press tt to move the cursor to the symbol.
> Press
▼ to pause the picture.
> Now press ss or tt to cue backwards or forwards, as you press ss or tt the speed changes accordingly. If you move the cursor back to the middle position, playback continues at normal speed.
> Press EXIT to remove the tool bar.
> Press GO to resume playback.
To change audio language…
> Press tt to move the cursor to the symbol.
> Press
▼ or
▲ to step between the audio languages available on your disc. Playback continues and audio language changes as you move between the options.
To change sound mode…
> Press tt to move the cursor to the symbol.
> Press
▼ or
▲ to step between the available sound modes. Playback continues and sound changes as you move between the options.
To change camera angle…
> Press tt to move the cursor to the symbol.
> Press
▼ or
▲ to step between the different camera angles available on your disc. Playback continues, and the camera angle changes as you move between the options.
To move between single frames…
> Press tt to move the cursor to the symbol.
> Press
▼ to pause the picture on a particular frame.
> Press ss or tt to move between the previous or following frames.
> Press GO to remove the tool bar.
> Press GO to resume playback.
To zoom in on a section of the picture…
> Press tt to move the cursor to the symbol.
> Press
▼ or
▲ to choose the magnification you want.
> Press GO twice to enter your choice and be able to pan across the picture.
> Press ss tt
▲ or
▼ to move to the section of the picture you want.
> Press GO twice to see playback of the selected section.
> Press the blue button to bring up the tool bar again.
> Press
▲ or
▼ to set the zoom function to Off.
> Press GO to resume playback.
To watch the film in slow motion…
> Press tt to move the cursor to the symbol.
> Press
▼ to pause the picture.
> Now press ss or tt to move slowly backwards or forwards, as you press ss or tt the speed changes accordingly. If you move the cursor back to the middle position, playback continues at normal speed.
> Press EXIT to remove the tool bar.
> Press GO to resume playback.
To switch to a different title on the disc…
> Press tt to move the cursor to the symbol.
> Press
▲ or
▼ to step between the titles available on your disc. Playback begins automatically, or…
> use the number keys 0 – 9 to key in the number of the title you want. Playback begins automatically.
To switch to a different chapter or track…
> Press tt to move the cursor to the symbol.
> Press
▲ or
▼ to step between the chapters or tracks available on your disc. Playback begins automatically, or…
> use the number keys 0 – 9 to key in the number of the chapter or track you want.
Playback begins automatically.
To move to a specific point in time on the disc…
> Press tt to move the cursor to the symbol.
> Press
▼ to be able to enter a time in the numeric field. If, for example, you wish to start playback one hour into a film, enter 1:00:00 in the numeric field by means of the number keys.
> Press GO twice to move to this point in time.
Select your favourite titles or chapters (fts) to be played only…
> Press tt to move the cursor to the symbol.
> Press
▼ to be able to make your selection.
Playback stops and the menu illustrated to the right appears.
> Press ss or tt to select On.
> Press
▼ to select titles.
> Press ss or tt to select the title number you want.
> Press GO twice if you wish to store the entire title, or…
> press
▼ when the cursor is placed on the selected title number to move to the first available chapter number.
> Press ss or tt to move between the chapters and press GO twice to store your selection. The title, chapters or tracks you choose will be shown besides the program field.
> Press EXIT to remove the menu and press GO to start playback of your favourite track selection.
To play the entire DVD and deactivate the
‘Favourite Track Selection (fts)’ function…
> Press tt to move the cursor to the symbol.
> Press
▼ to call up the fts menu.
> Press ss or tt to select Off.
> Press EXIT to remove the menu and press GO to resume playback.
no off 1 1
Favourite Track Selection title chapter program
On off
1 2 3 4 5 6 7 8 9 10
>
1 2 3 4 5 6 7 8 9 10
>
[ ]
Clear all
To delete a ‘Favourite Track Selection’…
> Press tt to move the cursor to the symbol.
> Press
▼ to call up the fts menu.
> Press
▼ to move to program.
> Press ss or tt to move to the selection you wish to delete.
> Press GO twice to delete the selection.
> Press EXIT to remove the menu and press GO to resume playback.
To delete all ‘Favourite Track Selections’…
> Press tt to move the cursor to the symbol.
> Press
▼ to call up the fts menu.
> Press
▼ to move to Clear all.
> Press GO twice to delete all selections.
> Press EXIT to remove the menu and press GO to resume playback.
19
NOTE! When the memory of the BeoCenter 1 is full, the oldest Favourite Track Selection (fts) entry is removed.
20
Use the radio
BeoCenter 1 tunes in available radio programs automatically when it is installed for the first time.
Once the programs are tuned in, you can either activate the radio and step through the tuned programs, key in the number of the program you want, or you can bring the entire list up on the screen and find the desired program there.
If you have created program Groups you can also call up program lists for your Groups.
Listen to tuned programs See list of all programs
To activate the built-in radio, choose RADIO as your source. The last program you listened to is switched on automatically.
Choose RADIO as your source and call up a program list to get a complete overview of the available radio programs.
RADIO
P 3
Press to switch on the radio. The last program you listened to is switched automatically
RADIO
P 3
Press to switch on the radio
▲
▼
Step up or down through the available tuned programs, or…
GO
Press and hold to call up the radio program list
0 – 9 key in the number of the program you want to listen to
▲
▼
Step up or down through the available programs
GO
Press to see the name or number of the current program
GO
Press to call up the chosen program, or
TV
Press another source button, e.g.
TV to switch to television programs
Pressing 0 will swap between the current and previous radio programs.
0 – 9 key in the number of the program you want to listen to
Call up the program list for a specific Group…
RADIO
Press to switch on the radio
P 3 ss tt
MY GROUP
Press ss or tt repeatedly to step through your Groups
GO
Press to call up the chosen
Group
GO
ss tt
Press and hold to call up the program list for this Group
Press ss or tt to see the program lists for all the other Groups
NOTE! Refer to the chapter entitled Re-tune or
add programs in the separate Reference book for more information about how to tune in additional programs.
RADIO PROGRAM LIST
1 P1
2 P2
3 P3
4 P4
5 STRUER
6 MVEST
7 . . . . . . . .
8 . . . . . . . .
9 BBC1
10 . . . . . . . .
11 SR1
12 SR2
13 SR3
14 . . . . . . . .
15 VIBORG
16 NRK1
17 NRK2
18 NRK3
select
GO
The program list for radio is now called up. It provides you with an overview of all your available radio programs.
P1
P2
P3
RADIO MW
NRK
BBC
SR1
MY RADIO group select GO
Groups list… Radio programs selected for a
Group also appear in the program lists for all tuned radio programs.
21
Technical specifications, features and the use thereof are subject to change without notice!
3508563
0208
Printed in Denmark by Bogtrykkergården a-s, Struer
www.bang-olufsen.com

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Stunning picture quality with adjustable settings for optimal viewing
- Crystal-clear sound with customizable speaker balance and sound modes
- Versatile DVD player with support for various disc formats and playback options
- Extensive connectivity options for easy integration with other devices
- Intuitive menu system for effortless navigation and control
- Programmable remote control for convenient operation
- Stylish design that complements any home décor