Yamaha | RX-E400 | Owner`s manual | Yamaha CRX-E400 Owner's manual

Yamaha CRX-E400 Owner's manual
GB
CRX-E400
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
CRX-E400
Receiver/CD Player
Récepteur/Lecteur CD
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Malaysia
0101CRXE400(M)./H1-H4.E
1
RX-E400
CDX-E400
V922180
02.6.13, 7:30 PM
CAUTION: READ THIS BEFORE OPERATING THIS UNIT
1
2
3
4
5
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
Install this unit in a well ventilated, cool, dry, clean
place away from direct sunlight, heat sources, vibration,
dust, moisture or cold. In a cabinet, allow about 10 cm
(4 in.) of free space all around RX-E400 for adequate
ventilation.
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes
from cold to hot, nor locate this unit in an environment
with high humidity (i.e., a room with a humidifier) to
prevent condensation inside this unit, which may cause
an electrical shock, fire, damage to this unit, and/or
personal injury.
Avoid installing this unit in a location where foreign
objects may fall onto this unit or where this unit may be
exposed to liquid dripping or splashing. On the top of
this unit, do not place:
• Other components, as they may cause damage and/or
discoloration on the surface of this unit.
• Burning objects (i.e., candles), as they may cause fire,
damage to this unit, and/or personal injury.
• Containers with liquid in them, as they may fall, spilling
the liquid and causing an electrical shock to the user
and/or damage to this unit.
6
7
8
9
10
11
12
13
14
15
16
17
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use excessive force on switches, knobs and/or
cords.
When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Use only the voltage specified on this unit. Using this
unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. YAMAHA will not be held responsible for any
damage resulting from use of this unit with a voltage
other than as specified.
To prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm.
Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any service
is needed. The cabinet should never be opened for any
reason.
When not planning to use this unit for long periods of
time (i.e., vacation), disconnect the AC power plug from
the wall outlet.
Be sure to read the “Troubleshooting” section on
common operating errors before concluding that this
unit is faulty.
Before moving this unit, press STANDBY/ON to set the
unit in standby mode, then disconnect the AC power
plug from the wall outlet.
0102CRXE400(M).Cau.E
2
18
VOLTAGE SELECTOR (General model only)
The VOLTAGE SELECTOR on the rear panel of this
unit must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are 110/120/
220/240 V AC, 50/60 Hz.
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
The unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off. This state is called the standby
mode. In this state, this unit is designed to consume a
very small quantity of power.
CAUTION FOR CARRYING THE UNIT
Before carrying the unit, first remove the disc from
the unit, press STANDBY/ON to turn the unit off,
then disconnect the AC power plug from the wall
outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
The wires in the mains lead are coloured in accordance
with the following code:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The wire which is coloured BLUE
must be connected to the terminal which is marked
with the letter N or coloured BLACK. The wire which
is coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described above.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous
if engaged in a live socket outlet.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
RX-E400 (U.S.A., Canada and General models)
The nameplate is located on the bottom of the unit.
02.6.13, 7:16 PM
FEATURES
<CDX-E400>
• Minimum RMS output power per
channel 40 W + 40 W
(6Ω, 20 Hz to 20 kHz, 0.1% THD)
• Full operation system remote control
• 40-station FM/AM preset tuning
• Multi-function RDS reception
• SUBWOOFER output terminal
• S-bit DAC and 8fs digital filter
• Optical digital output
• Random, repeat, and program play
• CD TEXT display
• Copy time control
• CD-RW compatible
English
<RX-E400>
The receiver (RX-E400) and CD player (CDX-E400) are the main units of the YAMAHA Piano Craft Series.
You can upgrade the system by adding the cassette deck (KX-E300) and MD recorder (MDX-E300)*.
* MD recorder (MDX-E300) may not be available for some areas.
CONTENTS
SUPPLIED ACCESSORIES ....................... 2
<CDX-E400>
CD PREVENTIVE CARE .......................... 2
NAMES OF BUTTONS AND CONTROLS
Front panel ......................................................... 17
Display............................................................... 17
Remote control .................................................. 18
GETTING STARTED
Remote control .................................................... 3
Connecting the speakers and antennas ................ 4
Connecting the system ......................................... 5
Setting the clock .................................................. 6
Adjusting the brightness of the display ............... 6
<RX-E400>
NAMES OF BUTTONS AND CONTROLS
Front panel ........................................................... 7
Display ................................................................. 7
Remote control .................................................... 8
BASIC OPERATIONS
Listening to a source............................................ 9
TUNING
Listening to the radio ......................................... 10
Presetting stations .............................................. 11
CD OPERATIONS
Playing a disc ..................................................... 19
Selecting the time display and CD TEXT ......... 20
Random-sequence play...................................... 20
Repeat play ........................................................ 21
Program play ..................................................... 21
SYSTEM CONTROL
Controlling other components ........................... 23
Before recording ................................................ 24
Dubbing setting ................................................. 24
Copy time control .............................................. 25
ADDITIONAL INFORMATION
Troubleshooting ................................................. 26
Specifications .................................................... 28
RECEIVING RDS STATIONS
Receiving RDS data .......................................... 12
PTY SEEK mode ............................................... 13
Optional settings for RDS functions ................. 14
USING THE BUILT-IN TIMER
Before using the timer ....................................... 15
Timer play and recording .................................. 15
Sleep timer ......................................................... 16
1
0103CRXE400(M).01-02.E
1
02.6.13, 7:16 PM
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are contained.
<RX-E400>
• Remote control
• AM loop antenna
POWER
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
C
R. TIME
D
E
• Indoor FM antenna
TAPE
DIRECTION
PRESET
MD
TUNER
PRESET
CD
TAPE
AUX
MD
REC/PAUSE
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
START
<CDX-E400>
DISPLAY
VOLUME
• Audio pin cable
• Batteries (AA, R6, UM-3)
• System control cable
CD PREVENTIVE CARE
• This compact disc player is designed for use with
following types of disc only. Never attempt to load any
other type of disc into the unit. The unit will also play
8-cm (3-inch) compact discs.
(Playback only)
• Do not use a CD with tape, seals, or paste on it, because
damage to the unit may result.
• Compact discs are not affected by small particles of
dust or fingerprints on their playing surface, but even so
they should be kept clean. Wipe by using a clean, dry
cloth. Do not wipe with a circular motion; wipe straight
outward from the center.
• Be sure to use only CD-R and CD-RW discs made by
reliable manufacturers.
• Some discs cannot be played depending on the disc
characteristics or recording conditions (copyrightprotected in a particular way, etc.).
• Compact discs are not subjected to wear during play,
but damage to the disc surface when the disc is being
handled can adversely affect the disc’s play.
• Do not use cleaning discs or warped discs. All of these
could damage the unit.
To prevent a malfunction of this unit
• Do not use any non standard shaped CD (heart, etc.)
available on the market, because it may damage the
unit.
• Do not try to clean the disc’s surface by using any type
of disc cleaner, record spray, antistatic spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc’s surface.
• Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because
these might warp or otherwise damage the disc.
No!
2
0103CRXE400(M).01-02.E
2
02.6.13, 7:16 PM
GETTING STARTED
Remote control operation range
English
Remote control
VOLUME
This remote control controls a whole system: not only
RX-E400 but also CDX-E400. Moreover, a cassette deck
(KX-E300) and MD recorder (MDX-E300) that level up
your system can be operated by it. Operating buttons for
each unit are explained on the pages below:
Receiver, RX-E400:
CD player, CDX-E400:
Cassette deck, KX-E300:
MD recorder, MDX-E300:
NATURAL SOUND
STEREO RECEIVER
RX–E400
STANDBY/ON
TIMER
DISPLAY
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
BASS
PRESET/TUNING
PRESET/BAND
HOUR
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
PHONES
–
p.8
p.18
p.23
p.23
+
–
+
R
L
Remote control
sensor
Battery installation
Within approximately
6 m (20 feet)
1
30°
3
30°
2
The remote control is shipped with a protection sheet to
prevent the surface from being scratched during
transportation.
When removing the sheet, first put adhesive tape on an
edge of the remote control so that the tape sticks to the
sheet. Then peel the sheet off with the tape.
ER
W
3
PO
3
3
3
6
6
6
2
2
9
6
Notes
1
8
7
7
7
7
4
4
8
8
4
4
1
8
5
5
1
1
5
5
• Use only AA, R6, UM-3 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
• Remove the batteries if the remote control will not be used for
an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
Removing the protection sheet
2
If you find that the remote control must be used closer to
the main unit than usual, the batteries are weak. Replace
batteries with new ones.
9
Battery replacement
ER
Replace the battery compartment cover.
W
Insert batteries into the battery compartment.
Notes
• There should be no large obstacles between the remote control
and the main unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
PO
Remove the battery compartment cover.
2
1
2
3
Note
• Do not scratch the remote control surface when peeling the
sheet off.
3
0104CRXE400(M).03-08.E
3
02.6.13, 7:16 PM
GETTING STARTED
Connecting the speakers and antennas
Never plug the AC power cord to the wall outlet until all connections are
completed.
Follow the steps as shown below to connect the system using the supplied cords and accessories. Be sure all connections are
made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
3
Right speaker
Left speaker
FM antenna
2 AM loop antenna
C
IN
MD
OUT
FM ANT
75Ω UNBAL.
D
A
R
IN
L
GND
TAPE
OUT
AM
ANT
B
+
–
IN
CD
E
SUBWOOFER
OUT
SYSTEM
CONNECTOR
IN
6Ω MIN./SPEAKER
AUX
R
L
SPEAKERS
4
1
1
Connect the Speakers.
1 Unscrew the knob.
2 Remove approx. 10 mm (4”) of insulation from
each of the speaker wires and insert the bare wire
into the terminal.
3 Tighten the knob to secure the wire.
Red: positive(+)
Black: negative(–)
2
Connect the AM Antenna.
Set up the AM loop antenna, then connect it.
Connect the FM Antenna.
FM ANT
75 Ω UNBAL
4
1
3
2
3
To wall outlet
Connect the AC power cord to a wall outlet.
Notes
• Use external FM/AM antennas if you need better reception.
Consult your dealer.
• The AM loop antenna should be placed apart from the main
unit. The antenna may be hung on a wall.
To connect the subwoofer (optional)
You can reinforce the bass frequencies by adding a
subwoofer (optional).
Connect the SUBWOOFER OUT terminal of the unit to
the INPUT terminal of the subwoofer.
GND
AM
ANT
4
0104CRXE400(M).03-08.E
4
02.6.13, 7:16 PM
GETTING STARTED
English
Connecting the system
Connecting RX-E400 and CDX-E400
1
2
3
Connect ‰ to ‰ using the Audio pin cable.
Insert the plugs into the jacks of the same color.
Connect RX-E400 and CDX-E400 with the system control cable.
The other SYSTEM CONNECTOR of CDX-E400 is for connecting MDX-E300 or KX-E300.
Connect the AC power plug of CDX-E400 to AC OUTLET of RX-E400.
This connection allows you to control the power of the system through one-touch operation. It also reduces the standby
power consumption of CDX-E400.
C
To wall outlet
IN
MD
OUT
FM ANT
75Ω UNBAL.
D
A
R
IN
L
GND
<RX-E400>
TAPE
OUT
AM
ANT
B
+
–
IN
CD
E
SUBWOOFER
OUT
SYSTEM
CONNECTOR
IN
6Ω MIN./SPEAKER
AUX
R
1
SPEAKERS
L
System control cable
Audio pin cable
2
To RX-E400
ANALOG
E
L
OUT
DIGITAL
OPTICAL
SYSTEM
CONNECTOR
3
<CDX-E400>
OUT
R
Adding KX-E300 and MDX-E300 to the above system
(For details, refer to the owner's manual supplied with the respective component.)
1
2
3
4
Connect Å and ı of RX-E400 to Å and ı of KX-E300.
Connect Ç and Î of RX-E400 to Ç and Î of MDX-E300.
Connect an external component to the AUX terminal of RX-E400.
Connect DIGITAL OPTICAL OUT of CDX-E400 to DIGITAL OPTICAL IN of MDX-E300.
Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL
IN jack before making digital connections. Be sure to replace the terminal’s cover when the terminal on the rear panel
is not being used, in order to protect from dust.
Caution
• Never turn RX-E400 on until all connections between components have been completed.
• Never connect or disconnect the system control cable and/or power cord while the system components are turned on.
5
0104CRXE400(M).03-08.E
5
02.6.13, 7:16 PM
GETTING STARTED
Setting the clock
You must set the clock before you use the timer functions.
The clock is based on a 24-hour system.
STANDBY/ON DISPLAY
HOUR MIN
VOLUME
NATURAL SOUND
STEREO RECEIVER
RX–E400
STANDBY/ON
Adjusting the brightness
of the display
You can adjust the brightness of the display. If you have
connected the CD player (CDX-E400), cassette deck
(KX-E300), and/or MD recorder (MDX-E300) to this
unit, the brightness of the displays is automatically
adjusted to that of this unit.
DISPLAY
DISPLAY
TIMER
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
BASS
PRESET/BAND
PRESET/TUNING
HOUR
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
VOLUME
PHONES
NATURAL SOUND
STEREO RECEIVER
RX–E400
STANDBY/ON
–
+
–
+
L
R
TIMER
DISPLAY
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
BASS
PRESET/BAND
PRESET/TUNING
HOUR
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
PHONES
TIME ADJ
PRESET/BAND
–
1
2
3
4
+
–
+
L
R
Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
While the power is on, press DISPLAY to display
the time.
While holding TIME ADJ, press HOUR to set the
hour.
• If you want to move the time in the reverse
direction, press HOUR while holding TIME ADJ
and PRESET/BAND.
While holding TIME ADJ, press MIN to set the
minutes.
• If you want to move the time in the reverse
direction, press MIN while holding TIME ADJ
and PRESET/BAND.
INPUT
Press and hold DISPLAY for about two seconds so that
“Dimmer ±0” appears on the display. While holding
DISPLAY, turn INPUT clockwise to increase or
counterclockwise to decrease brightness.
Control Range: ±0 to –6 (Preset value: ±0)
To display the clock
Press DISPLAY.
The current time appears for about 8 seconds, then the
normal display returns. Some buttons and controls may
not work while the current time is displayed.
Note
• In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
6
0104CRXE400(M).03-08.E
6
02.6.13, 7:16 PM
RX-E400 NAMES OF BUTTONS AND CONTROLS
1 2
3 45 6 7 8
English
Front panel
9
VOLUME
NATURAL SOUND
STEREO RECEIVER
RX–E400
STANDBY/ON
DISPLAY
TIMER
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
PRESET/TUNING
PRESET/BAND
HOUR
BASS
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
PHONES
–
0 q
+
w
–
+
e
1 STANDBY/ON (P.9)
2 TIMER indicator (P.15)
3 DISPLAY (P.15)
4 TIME ADJ/MEMORY (P.6/P.11)
5 AUTO/MAN’L/TIMER (P.10/P.15)
6 PRESET/BAND (P.10)
7 Display (P.7)
8 PRESET/TUNING / (P.10)
HOUR/MIN (P.6/P.15)
R
L
r
t
9 VOLUME (P.9)
0 PHONES (P.9)
q Remote control sensor (P.3)
w BASS (P.9)
e TREBLE (P.9)
r BALANCE (P.9)
t INPUT (P.9)
Display
PRESET
EDIT
1
STEREO AUTO RDS PS PTY RT CT
TUNED MEMORY
PTY HOLD
23 456 7 89
1 Multi-information display
2 EDIT indicator
3 PRESET indicator (P.11)
4 STEREO indicator (P.10)
5 TUNED indicator (P.10)
6 AUTO indicator (P.10)
0
TIMER
SLEEP
q
w
7 MEMORY indicator (P.11)
8 RDS indicator (P.12)
9 RDS mode indicators (P.12)
0 PTY HOLD indicator (P.13)
q TIMER indicator (P.15)
w SLEEP indicator (P.16)
7
0104CRXE400(M).03-08.E
7
02.6.13, 7:16 PM
RX-E400 NAMES OF BUTTONS AND CONTROLS
Remote control
POWER
1
2
3
6
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
4
5
C
R. TIME
D
E
TAPE
DIRECTION
PRESET
7
9
MD
TUNER
PRESET
CD
TAPE
AUX
MD
REC/PAUSE
MODE
e
TAPE
REC/PAUSE
DUBBING
SLEEP
8
0
q
w
1 POWER (P.9)
2 Preset numbers (P.11)
3 FREQ/RDS (P.12)
4 PTY SEEK MODE (P.13/P.14)
5 PTY SEEK START (P.13/P.14)
6 A/B/C/D/E (P.11)
7 PRESET / (P.11)
8 TUNER (RX-E400) (P.11)
9 MD (MDX-E300) (P.23)
0 TAPE (KX-E300) (P.23)
q CD (CDX-E400) (P.19)
w AUX (The equipment connected to the AUX
terminal) (P.5)
e SLEEP (P.16)
r DISPLAY (P.15)
t VOLUME %/fi (P.9)
Note
• 8~w are operation buttons and input selectors for each
component.
START
DISPLAY
r
t
VOLUME
8
0104CRXE400(M).03-08.E
8
02.6.13, 7:16 PM
BASIC OPERATIONS
STANDBY/ON
TREBLE
1
2
VOLUME
STEREO RECEIVER
RX–E400
STANDBY/ON
TIMER
DISPLAY
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
BASS
PRESET/TUNING
PRESET/BAND
HOUR
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
PHONES
–
+
–
+
L
R
3
PHONES
BASS
BALANCE
INPUT
POWER
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
5
6
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
E
MD
TUNER
TAPE
AUX
MODE
If desired, adjust BASS, TREBLE, and BALANCE.
BALANCE: Adjust the balance of the output volume
from the left and right speakers to compensate for
sound imbalance caused by the speaker location or
listening room conditions.
PRESET
CD
MD
REC/PAUSE
Adjust the volume level by turning VOLUME on the
front panel or pressing VOLUME %/fi on the remote
control.
TREBLE: Turn this control clockwise to increase (or
counterclockwise to decrease) the high frequency
response.
TAPE
DIRECTION
PRESET
Play the source. (Refer to the owner’s manual
supplied with each selected component.)
BASS: Turn this control clockwise to increase (or
counterclockwise to decrease) the low frequency
response.
C
R. TIME
D
Select the desired input source by turning INPUT so
that the source appears on the display.
• When you operate the component connected to the
AUX terminal, turn INPUT to select AUX.
4
POWER
Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
• Piano Craft series components that have correct
system connections made to RX-E400 can be
controlled to turn to the on or standby mode by
RX-E400. However, once the connected
components are turned to the standby mode with
their respective STANDBY/ON button, they
cannot be controlled by RX-E400 STANDBY/
ON button.
VOLUME
NATURAL SOUND
Set the volume to “MIN” by turning VOLUME.
English
Listening to a source
TAPE
REC/PAUSE
DUBBING
When you use headphones
START
SLEEP
DISPLAY
VOLUME %/fi
VOLUME
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the main speakers
through the headphones.
When you have finished using this
unit
Press STANDBY/ON on the front panel again or
POWER on the remote control to set this unit to the
standby mode.
Auto standby function
This unit will be put automatically into the standby mode
under the following conditions:
• A component connected with a system control cable is
selected as an input source.
• The component connected to this unit is in stop mode
and not operated for 30 minutes.
9
0105CRXE400(M).09-09.E
9
02.6.13, 7:16 PM
TUNING
Listening to the radio
You can find radio stations automatically and manually.
AUTO/MAN’L PRESET/TUNING
/
VOLUME
NATURAL SOUND
STEREO RECEIVER
DISPLAY
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
BASS
PRESET/BAND
PRESET/TUNING
HOUR
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
PHONES
–
+
–
+
L
1
2
3
RX–E400
STANDBY/ON
TIMER
Manual tuning
Follow steps 1 and 2 described in “Automatic
tuning.”
Press AUTO/MAN’L so that “AUTO” disappears
from the display.
Press PRESET/TUNING
(For a higher
(For a lower frequency) to select
frequency) or
your desired station.
• Each time you press PRESET/TUNING or
the frequency changes step by step.
R
PRESET/BAND
INPUT
Automatic tuning
1
2
3
4
5
Select TUNER by turning INPUT so that the
frequency of a radio station appears in the display.
Press PRESET/BAND to select the reception band.
Do not select the preset tuning mode (in which
“PRESET” appears on the display).
Press AUTO/MAN’L so that “AUTO” appears in the
display.
Press PRESET/TUNING
(For a higher
(For a lower frequency).
frequency) or
The unit starts searching for a station.
STEREO
AUTO
TUNED
When the unit finds a station, the unit stops searching
and “TUNED” appears on the display.
6
If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
• If automatic tuning search does not find the desired station, try
manual tuning as described next.
• When an FM stereo broadcast with sufficient signal strength is
received, “STEREO” appears on the display and you can listen
to stereo sound.
10
0106CRXE400(M).10-11.E
10
02.6.13, 7:16 PM
,
TUNING
The unit can preset station frequencies selected by
Automatic tuning or Manual tuning. Up to 40 stations can
be stored. With this function, you can select any desired
station by pressing the corresponding preset station
number.
PRESET/TUNING
/
STEREO RECEIVER
Select TUNER as input source by turning INPUT.
Press MEMORY for about 2 seconds.
• The unit starts presetting stations, “AUTO” and
“MEMORY” will flash on the display.
Received stations are stored to A1, A2...A8 sequentially.
After 40 stations or all FM and AM stations are stored, the
display will show the preset station A1.
To recall a preset station
VOLUME
NATURAL SOUND
1
2
English
English
To preset stations automatically
Presetting stations
RX–E400
STANDBY/ON
DISPLAY
TIMER
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
BASS
PRESET/BAND
PRESET/TUNING
HOUR
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
PHONES
–
+
–
+
L
Press TUNER and select the desired number by pressing
PRESET/BAND and PRESET/TUNING / on the
front panel or PRESET / , A/B/C/D/E and 1–8 on
the remote control.
R
POWER
MEMORY PRESET/BAND
INPUT
1–8
To preset stations manually
1
2
3
Tune in a desired station.
(Refer to the previous page for the tuning procedure.)
2
3
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A/B/C/D/E
Press MEMORY.
1
1
4
A
B
TEXT/TIME
C
R. TIME
D
Within about 5 seconds, use PRESET/TUNING
/ to select a desired preset number. Continue
pressing PRESET/TUNING / to select the
group of the preset stations (A, B, C, D, and E).
E
TAPE
DIRECTION
PRESET
MD
TUNER
PRESET
CD
TAPE
TUNER
PRESET
/
AUX
PRESET
STEREO
TUNED
MD
REC/PAUSE
MEMORY
MODE
4
Press MEMORY.
• “MEMORY”, “PRESET”, and preset number will
appear on the display.
TAPE
REC/PAUSE
DUBBING
SLEEP
START
DISPLAY
VOLUME
The arrow will appear for a second when
it is preset.
PRESET
STEREO
TUNED
5
MEMORY
Repeat steps 1 to 4 until all desired stations are
preset.
Notes
• A new setting can be preset in place of a previous one.
• The preset stations are retained for a week after you disconnect
the AC power cord or a power failure occurs.
11
0106CRXE400(M).10-11.E
11
02.6.13, 7:16 PM
RECEIVING RDS STATIONS
Receiving RDS data
RDS (Radio Data System) is a data transmission system
by FM stations in many countries. Stations using this
system transmit an inaudible stream of data in addition to
the normal radio signal. RDS data contains various types
of information, such as PS (Program Service), PTY
(Program Type), RT (Radio Text), and CT (Clock Time).
POWER
FREQ/RDS
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
• If the unit cannot find a station with PS data, the unit stops
searching and “NO PS” appears on the display.
RDS PS
PTY
The type of the program on the RDS station now being
received is displayed. You can make this unit search for a
station which is broadcasting a program of a desired
program type. (Refer to PTY program mode in the next
section for details.)
RDS
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
E
TAPE
DIRECTION
PRESET
MD
TUNER
PRESET
CD
TAPE
AUX
MD
REC/PAUSE
MODE
PTY
C
R. TIME
D
TUNER
PS
The name of the RDS station being received is displayed.
TAPE
REC/PAUSE
DUBBING
RT
Information about the program (such as the title of the
song, name of the singer, etc.) on the RDS station being
received is displayed by a maximum of 64 alphanumeric
characters, including the umlaut symbol. If other
characters are used in the RT data, they are displayed with
an under-bar.
• If the unit cannot find a station with RT data, the unit stops
searching and “NO RT” appears on the display.
START
RDS
SLEEP
RT
DISPLAY
VOLUME
CT
Current time is displayed.
• If the unit cannot find a station with CT data, the unit stops
searching and “NO CT” appears on the display.
1
2
Tune in the FM station. (Refer to page 10, or you can
simply press TUNER on the remote control.)
Press FREQ/RDS to choose the mode. Each time
you press FREQ/RDS, the type changes as follows:
RDS
Notes
• RDS may not work properly if the station you are tuned to is
not transmitting the RDS signal properly or if the signal
strength is weak.
• Some FM stations do not offer RDS service. Of those that do,
not all provide the same types of services. The types provided
by the received RDS station are dimmed on the display. Check
with your local radio stations for details on RDS services in
your area.
12
0107CRXE400(M).12-14.E
12
CT
02.6.13, 7:16 PM
RECEIVING RDS STATIONS
You can locate a desired station by selecting a program
type. The unit searches all preset stations into the type of
programs currently being broadcast from the RDS
stations.
1
2
Tune in the FM station. (Refer to page 10, or you can
simply press TUNER on the remote control.)
English
To locate a station
PTY SEEK mode
Press PTY SEEK MODE once so that “PTY” and a
PTY program flashes on the display.
POWER
PTY SEEK MODE
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
PTY
3
PTY SEEK START
4
C
R. TIME
D
E
Within about 20 seconds, press PRESET /
repeatedly until the desired programGetting
type Playing
appearsStarted
on CDs
the display.
Within about 20 seconds, press PTY SEEK START.
• If a station broadcasting the selected program type
is found, the unit stops searching and the Program
Service name appears on the display.
“PTY HOLD” appears on the display.
TAPE
DIRECTION
PRESET
TUNER
PRESET
PRESET
MD
CD
TAPE
PRESET
AUX
MD
REC/PAUSE
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
START
DISPLAY
RDS
/
PTY
PTY HOLD
5
Repeat step 4 until the desired station is located.
If there is no station broadcasting the program type
you select, “NO PTY” appears on the display, then
the Program Service name or frequency appears on
the display.
VOLUME
List of PTY (Program Type)
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R. M
News
Current Affairs
General Information
Sports
Education
Drama
Culture
Science
Light Entertainment
Pops
Rock
Middle of the Road
Music (Easy-listening)
LIGHT M
Light Classics
CLASSICS Serious Classics
OTHER M Other Music
13
0107CRXE400(M).12-14.E
13
02.6.13, 7:16 PM
RECEIVING RDS STATIONS
• If you receive an RDS station of some other
country, the built-in clock is synchronized with
the time setting of the country.
• If the built-in clock is not yet set for the current
time or reset due to a power failure, etc., it will be
set for the time of the CT data automatically,
whether this setting is ON or OFF.
Optional settings for
RDS functions
The tuner has the following functions which make use of
the RDS data service. These are originally in operation
ON. However, you can turn these functions OFF, if so
desired.
2. LOCAL = CT (ON/OFF)
If the RDS station being received employs the
local time (summer time, etc.) data service, its
time is displayed in the CT mode.
POWER
PTY SEEK MODE
FREQ/RDS
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
3. A.M. = RDS (ON/OFF)
RDS stations are searched instead of all FM
stations by the automatic preset tuning operation
when the setting is ON. (Refer to page 11.)
PTY SEEK START
C
R. TIME
D
E
TAPE
DIRECTION
PRESET
TUNER
MD
TUNER
PRESET
CD
4. RT SPEED: ±0
Changes the scrolling speed of the radio text
decreasing the value and, in turn, reducing the
speed.
TAPE
AUX
MD
REC/PAUSE
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
START
DISPLAY
DISPLAY
VOLUME
Control Range: ±0 to ±3 (Preset value: ±0)
5
1
2
3
4
Select the FM band by pressing TUNER.
Press DISPLAY to display the current time.
Press FREQ/RDS.
6
Each time you press PTY SEEK MODE the display
will change as follows:
Choose the function ON or OFF by pressing PTY
SEEK START, confirming it in the display. Press
PTY SEEK START repeatedly to change the value
for RT SPEED.
• If there is no operation for about 20 seconds, this
mode is cancelled and turns into the frequency
display. If the station has PS data, it turns into the
PS mode.
Press FREQ/RDS again to restore the frequency
display mode.
1. CT = CLOCK (ON/OFF)
The tuner corrects the time of the built-in clock
automatically by synchronizing it with the CT
data on the RDS station being received.
14
0107CRXE400(M).12-14.E
14
02.6.13, 7:16 PM
USING THE BUILT-IN TIMER
USING THE BUILT-IN TIMER
If you want to use the cassette deck, KX-E300 or the MD
Recorder, MDX-E300 for timer play or recording, you
must first make the connections as shown in “Connecting
the system” on page 5. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300.
English
3. Timer REC
Select the recording component by turning
INPUT. If you like to enjoy timer play with
TUNER or AUX, select “REC Mode OFF”.
Before using the timer
(Example)
Timer play and recording
4. ON Time
“ON Time” appears on the display for a second,
and changed to the time setting mode.
Press HOUR to set the hour.
Press MIN to set the minute.
By using the built-in timer, you can have the unit turn on
at a specified time and begin playing or recording
automatically. You can also specify the turn off time.
HOUR MIN
DISPLAY
VOLUME
NATURAL SOUND
STEREO RECEIVER
RX–E400
5. OFF Time
Set the time the same way as above.
If you set the ON time but not OFF time, the timer
play or recording will finish automatically after an
hour.
STANDBY/ON
TIMER
DISPLAY
MEMORY
AUTO/MAN'L
TIMER ADJ
TIMER
BASS
PRESET/BAND
PRESET/TUNING
HOUR
TREBLE
MIN
MIN
MAX
INPUT
BALANCE
PHONES
–
+
–
+
TIMER
1
L
Notes
R
• The display mode will change in about 8 seconds. If the
mode is changed before the setting is completed, call the
mode again by pressing DISPLAY once or more.
• If you select the input other than TUNER and AUX on
“2. Timer Input”, “3. Timer REC” is skipped.
INPUT
Press DISPLAY.
Whenever DISPLAY is pressed, the display mode
changes as follows:
1. Clock Time (TIMER on/off mode)
If you have not set the clock yet “Set Clock”
appears. You need to set the current time as
described on page 6.
2. Timer Input
Select the source to be played by turning INPUT.
• Timer recording is possible only when you
select TUNER or AUX.
2
Press TIMER to complete the timer setting.
The system is put in the standby mode.
• TIMER indicator lights up.
If you continue using the system, press STANDBY/
ON to turn on this unit.
To cancel the timer play setting
Press DISPLAY to show the current time, then press
TIMER so that “TIMER” goes off from the display. You
can also cancel by pressing TIMER in standby mode.
Note
• In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
15
0108CRXE400(M).15-16.E
15
02.6.13, 7:17 PM
USING THE BUILT-IN TIMER
Sleep timer
The unit can be turned off automatically at a selected
SLEEP time.
PRESET
MD
TUNER
PRESET
CD
TAPE
AUX
MD
REC/PAUSE
MODE
SLEEP
TAPE
REC/PAUSE
DUBBING
START
SLEEP
DISPLAY
VOLUME
1
2
Play the desired sound source.
Press SLEEP repeatedly until the desired sleep time
appears in the display. Each time you press SLEEP,
the sleep time changes as follows:
SLEEP 2h00m
SLEEP 1h30m
SLEEP 1h00m
SLEEP 0h30m
SLEEP OFF
About 4 seconds after setting, the normal display will
resume.
• “SLEEP” will appear in the display.
3
The unit will turn off automatically when the selected
sleep time is reached.
16
0108CRXE400(M).15-16.E
16
02.6.13, 7:17 PM
CDX-E400 NAMES OF BUTTONS AND CONTROLS
1
2
NATURAL SOUND
English
Front panel
3 4 5
COMPACT DISC PLAYER
CDX–E400
STANDBY/ON
/
6
1 STANDBY/ON (P.19)
2 Disc tray (P.19)
3 (Open/Close) (P.19)
4 & (Stop) (P.19)
/
7
5 ^ (Play/Pause) (P.19)
6 Display (this page)
7 $/! (Skip/Search Backward)
⁄/› (Skip/Search Forward) (P.19)
Display
8
7
6
5
4
REPEAT S F PROGRAM RANDOM 1 2 3 4 5 6 7 8 9 10 SPACE A
TITLE ARTIST TRACK CD–TEXT 11 12 13 14 15 16 17 18 19 20
9
1 Multi-information Display
2 * Pause indicator
3 # Play indicator
4A
B Tape side indicator (P.25)
5 Music calendar
1
B
2 3
6 RANDOM indicator (P.20)
7 PROGRAM indicator (P.21)
8 REPEAT S/F (Single or Full) indicator (P.21)
9 CD-TEXT indicator (P.20)
17
0109CRXE400(M).17-18.E
17
02.6.13, 7:17 PM
CDX-E400 NAMES OF BUTTONS AND CONTROLS
Remote control
POWER
1
2
3
5
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
4
C
R. TIME
D
E
6
7
8
9
TAPE
DIRECTION
PRESET
MD
TUNER
PRESET
CD
TAPE
0
AUX
MD
REC/PAUSE
MODE
1 Numeric buttons (P.19)
• +100 button is used when operating
MDX-E300.
2 REP (Repeat) (P.21)
3 RANDOM (Random) (P.20)
4 PROG (Program) (P.21)
5 TEXT/TIME (P.20)
6 ^ (Play/Pause) (P.19)
7 & (Stop) (P.19)
8 $ ! (Skip/Seach Backward) (P.19)
9 ⁄ › (Skip/Seach Forward) (P.19)
0 CD input (P.19)
TAPE
REC/PAUSE
DUBBING
SLEEP
START
DISPLAY
VOLUME
18
0109CRXE400(M).17-18.E
18
02.6.13, 7:17 PM
CD OPERATIONS
Press
tray.
to open the disc tray, and place a CD on the
& ^
400
CD
C
SO
NATURAL SOUND
COMPACT DISC PLAYER
UN
D
CO
AC
MP
T
X-E
YER
PLA
DIS
AL
CDX–E400
TUR
NA
Y/ON
NDB
STA
STANDBY/ON
/
/
4
$/! ⁄/›
Press ^ to start play.
This unit starts play.
To pause play
Press ^.
To resume play, press ^ again.
POWER
To stop play
Numeric
buttons
1
2
3
Press &.
1
4
2
5
3
6
To eject the CD
4
7
5
8
6
9
Press to open the disc tray, and remove the CD from
the tray.
7
0
8
+10
+100
To play a specific track on the disc
(Skip)
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
C
R. TIME
D
Direct play
E
^
&
$ !/⁄ ›
TAPE
DIRECTION
PRESET
MD
TUNER
PRESET
CD
CD
TAPE
Select a desired track using the numeric button.
(Example: To select 35, press +10 three times so that
“3 –” appears in the display, then press 5.)
Skip play
Press ⁄/› to skip forward or $/! to skip
backward. Press once for each track to be skipped.
AUX
MD
REC/PAUSE
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
START
DISPLAY
VOLUME
Notes
• You cannot enter a number that is higher than the last track
number on the disc.
• These operations can also be performed when the unit is in the
pause or stop mode.
• During stop mode, if ⁄/› or $/! is pressed, the
track number successively changes to higher numbers (or
lower numbers).
To advance or reverse playback
rapidly (Search)
1
2
Turn on the power of RX-E400 and CDX-E400.
(Refer to page 9.)
Press CD on the remote control in order to operate
the CD player by the remote control.
Press and hold ⁄/› to advance playback rapidly, and
$/! to reverse playback rapidly.
Note
• This unit cannot play a CD-R or CD-RW disc unless the disc is
finalized. Please make sure to finalize the disc on the CD
recorder before playing on this unit.
19
0110CRXE400(M).19-22.E
19
02.6.13, 7:17 PM
English
3
Playing a disc
CD OPERATIONS
Selecting the time
display and CD TEXT
Random-sequence play
The unit can play all the tracks in a random sequence.
You can select any of four time displays by pressing
TEXT/TIME. When you play a CD with CD TEXT, the
disc title, artist name, and track name are also displayed.
POWER
POWER
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
A
7
0
8
+10
+100
D
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
B
TEXT/TIME
C
R. TIME
RANDOM
E
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
D
TEXT/TIME
C
R. TIME
E
Each time you press TEXT/TIME, the display changes as
follows:
Elapsed time of the
current track
Remaining time of the
current track
Total disc play time
Total remaining time of
the disc
Press RANDOM.
• “RANDOM” appears on the display.
The unit starts random sequence play.
To cancel random-sequence play
mode
Press & or RANDOM.
• “RANDOM” disappears from the display.
Notes
• This feature will not function during programming, or during
programmed play.
• If ⁄/› is pressed during random-sequence play, the next
randomly programmed track will be played.
If $/! is pressed, play will return to the beginning of the
current track.
• Total remaining time on the disc will not be displayed during
random-sequence play.
• “CD-TEXT” appears on the display if
a CD has CD TEXT.
Disc title
Artist name
Track name
Note
• The disc title, artist names, or track names may not be
displayed with some CD TEXT discs. In this case, “(NO
ENTRY)” appears on the display for about two seconds and
then go back to the time display.
20
0110CRXE400(M).19-22.E
20
02.6.13, 7:17 PM
CD OPERATIONS
You can play any desired track or disc repeatedly.
Press REP to select the repeat mode.
Program play
English
Repeat play
By creating a program, you can enjoy listening to your
favourite tracks in any desired order. As many as 30
tracks can be programmed in sequence.
POWER
POWER
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
Numeric
buttons
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
REP
A
B
TEXT/TIME
D
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
C
R. TIME
A
E
B
TEXT/TIME
D
E
^
SINGLE REPEAT
The current track is played repeatedly.
&
$ !/⁄ ›
TAPE
DIRECTION
PRESET
REPEAT S
PROG
C
R. TIME
TUNER
MD
PRESET
CD
TAPE
AUX
FULL REPEAT
MD
REC/PAUSE
The current disc is played repeatedly.
• In random-sequence play mode, all randomly
sequenced tracks are played repeatedly in the same
order.
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
START
DISPLAY
VOLUME
REPEAT
F
To cancel repeat play mode
Press REP successively until “REPEAT S” and
“REPEAT F” disappear from the display.
1
2
Press & to stop the unit.
Press PROG.
• “PROGRAM” appears in the display.
PROGRAM
3
Use the numeric buttons to select a track number
until the desired track number appears on the display.
PROGRAM
4
5
Repeat step 3 to program more tracks. You can select
the same track again.
Press ^ to start program play.
21
0110CRXE400(M).19-22.E
21
02.6.13, 7:17 PM
CD OPERATIONS
To stop program play mode
Press &.
Note
• ⁄/› or $/! can be used during program play to skip
to tracks within the program.
To check program data
1.
Press & to stop program play.
2.
Press PROG. Then each time you press ⁄/› /
$/!, the track number and the program number
are displayed in the order of the program.
To change program data
1.
Follow the preceding procedure described in “To
check program data.”
2.
Display the track number to be changed by pressing
⁄/› / $/!.
3.
Press the numeric button of the desired track. The
previously programmed track will be cleared from
memory and the new one will be programmed.
To delete all program data
When program play is stopped, press &.
Note
• Turning the unit to the standby mode or opening the disc tray
also deletes the program data.
22
0110CRXE400(M).19-22.E
22
02.6.13, 7:17 PM
SYSTEM CONTROL
MDX-E300
POWER
1
2
3
4
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
A
B
TEXT/TIME
E
6,1
MD
KX-E300
TUNER
PRESET
CD
TAPE
5
AUX
q
1 Numeric buttons
2 REP (Repeat)
3 RANDOM
4 TEXT/TIME
5 PROG (Program)
6 ^ (Play/Pause)
7 ⁄ › (Skip/Search Forward)
8 $ ! (Skip/Search Backward)
9 & (Stop)
0 MD input
q MD REC/PAUSE
7,2
TAPE
DIRECTION
PRESET
0
5
C
R. TIME
D
8,3
9,4
English
Controlling other components
MD
REC/PAUSE
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
6
1 ^ (Play)
2 ⁄ › (Fast-foward)
3 $ ! (Rewind)
4 & (Stop)
5 TAPE input
6 TAPE REC/PAUSE
START
DISPLAY
VOLUME
23
0111CRXE400(M).23-25.E
23
02.6.13, 7:17 PM
SYSTEM CONTROL
2
Before recording
When you record by using MDX-E300 or KX-E300, you
must first make the connections as shown in “Connecting
the system” on page 5. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300. A source from
the component which is connected to the AUX terminal
component can be recorded on a tape or MD.
3
Play unit
Record unit
Dubbing setting
There are six different combinations of components. Once
you choose a certain mode, recording starts and ends
automatically in a certain way for each mode.
• Same as CD = TAPE
4
TAPE
DIRECTION
PRESET
MD
TUNER
Play unit
Record unit
PRESET
CD
TAPE
AUX
MD
REC/PAUSE
MODE
DUBBING
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
DISPLAY
DUBBING
START
VOLUME
1
• Recording automatically starts at the beginning of
the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
START
2
Press DUBBING START to start recording.
Note
Decide the combination of the components. Each
time you press DUBBING MODE, the mode will
change in the below order.
• The displays 1~4 which include the component you have
not connected to your receiver (RX-E400) will be skipped.
1
To stop dubbing
Press &.
• Recording automatically starts from the beginning
of the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
• When the recording on side A finishes while a
track is being played back, the recording on side B
starts from the beginning of the same track.
• The sound is automatically faded out when it gets
close to the end of side B.
24
0111CRXE400(M).23-25.E
24
02.6.13, 7:17 PM
SYSTEM CONTROL
By specifying the length of the tape, CDX-E400 programs
tracks or helps you to program tracks so they will fit onto
the tape with the least amount of unrecorded space
remaining at each end of the tape. There are three ways of
programming.
4
5
1 Manual tape programming
6
7
POWER
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
A
B
TEXT/TIME
PROG
C
R. TIME
D
R.TIME
E
1
2
TAPE
DIRECTION
PRESET
MD
TUNER
PRESET
CD
3
4
TAPE
AUX
MD
REC/PAUSE
DUBBING
MODE
MODE
TAPE
REC/PAUSE
DUBBING
SLEEP
DUBBING
START
START
DISPLAY
2
Insert the desired disc into the CD player, and load a
blank tape into the KX-E300.
Press R.TIME repeatedly to select the length of tape
to be used. Each time you press R.TIME, the length
of the tape changes as follows:
46
54
90
60
• You can use numeric buttons to input the length of
the tape.
3
Press PROG to confirm the program.
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
Press PROG to start programming.
B” appears in the display to indicate the
• “A
direction of the tape.
Repeat steps 1 and 2 of “Manual tape programming”.
Press REP to start programming.
• Programming is done in the order on the CD from
side A to side B. When complete, the programmed
track number and total time are indicated in the
display for 3 seconds.
Press PROG to confirm the program.
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
3 Random tape programming
1
2
VOLUME
1
Press R.TIME to continue programming tracks on
side B.
• Repeat step 4.
2 Automatic tape programming
FREQ/RDS MODE–PTY SEEK–START
REP
RANDOM
PROG
REP
RANDOM
Select the desired track number using numeric
buttons.
• Repeat step 4 to continue programming tracks.
• The remaining time is shown on the display. If the
track is longer than the remaining time, “Error”
appears on the display.
3
4
Repeat steps 1 and 2 of “Manual tape programming”.
Press RANDOM to start programming.
• Programming of CD tracks is done randomly from
side A to side B. When complete, the programmed
track number and total time are indicated in the
display for 3 seconds.
Press PROG to confirm the program.
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
To stop dubbing
Press & on CDX-E400 or & on KX-E300.
To cancel tape programming
Press & on CDX-E400 when dubbing is stopped.
25
0111CRXE400(M).23-25.E
25
02.6.13, 7:17 PM
English
Copy time control
ADDITIONAL INFORMATION
Troubleshooting
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the
simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the
power cord and contact your authorized YAMAHA dealer or service center for help. When taking the service, the
MDX-E300 or KX-E300 may be needed. For details, contact your authorized YAMAHA dealer or service center.
RX-E400 RECEIVER
SYMPTOM
CAUSE
REMEDY
The unit does not switch ON when
the STANDBY/ON switch is pressed.
The AC power cord is not connected or not
completely connected.
Securely connect the power cord.
No sound from one speaker.
Loose speaker connections.
Connect properly.
The sound suddenly goes off.
The protection circuit has been activated
because of a short circuit, etc.
Check the speaker wires are not touching each other
and then turn the unit back on.
No sound from an external unit
connected with this unit or play does
not begin.
Incorrect cord connections.
Connect the cords properly. If the problem persists,
the cords may be defective.
Input source selection is not proper.
Make a proper input source selection.
Sound distorted.
The component connected to this unit is
disconnected from AC outlet.
Connect the AC power cord of the component to an
AC outlet.
Excessive static in FM broadcasts.
Interference from starting motor of a nearby
car.
Position the FM antenna as high and as far away
from nearby roads as possible. Connect using a
coaxial cable.
Interference from the thermostat of a nearby
electrical appliance.
Noise increases during stereo
broadcasts.
Antenna input is too weak due to obstructions
or excessive distance from the broadcasting
station.
Check the antenna connection.
Stereo broadcasts are noisy and
STEREO indicator blinks on and off.
Insufficient antenna input.
Install an antenna appropriate for the electric field
strength of your area.
Cannot select preset stations.
Preset memory has been erased.
Reprogram memory presets.
Buzzing or static during AM
broadcasts.
Interference from sources such as lightning,
fluorescent lights, electric motors or thermostat
of nearby electrical appliance.
The problem is difficult to eliminate, but can be
lessened by grounding AM loop antenna.
TV or microprocessor is being used nearby.
Move away from TV or microprocessor.
Radio signal is weak or the antenna is not
properly connected.
Properly connect the AM loop antenna.
AM broadcast sensitivity is poor.
Install a multi-element type FM antenna if possible.
Change orientation of the AM loop antenna.
Install an external AM loop antenna.
Cannot set timer.
Current time is not set.
Set current time.
The unit does not work normally.
The internal microcomputer has been frozen
by an external electric shock (lightning,
excessive static electricity, etc.) or the power
supply with low voltage.
Unplug the AC power cord from the wall outlet, and
then plug in again after about one minute.
26
0112CRXE400(M).26-29.E
26
02.6.13, 7:17 PM
REMOTE CONTROL
SYMPTOM
CAUSE
REMEDY
Play does not begin.
The disc is damaged.
Check the disc carefully; replace it if necessary.
There is moisture on the laser pick-up.
Wait 20 to 30 minutes after switching the unit ON
before trying to play a disc.
The disc has been loaded upside down.
Reload the disc with the label side facing up.
The disc is dirty.
Clean the disc.
Play is delayed, or begins at the
wrong place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if necessary.
CD synchronized recording or
Automatic recording function does
not work.
The system cable is not connected securely.
Connect the system cable properly.
Sound “skips.”
The unit is being subjected to vibrations or
impacts.
Relocate the unit.
The disc is dirty.
Clean the disc.
Sound “hums.”
Improper cable connections.
Securely connect the audio cables. If the problem
persists, the cables may be defective.
Noise from inside of the unit.
The disc may be warped.
Replace the disc.
The remote control does not work.
The batteries of the remote control are too
weak.
Replace the batteries with new ones.
Remote control is too far away or is being
used at an incorrect angle.
Use within 6 meters and 60 degree radius.
Direct sunlight or lighting (of an inverter type
of fluorescent lamp, etc.) is striking the
remote control sensor of the unit.
Change the position of the unit.
Remote control is being used near TV set
with a remote control sensor.
Relocate this unit away from the TV or cover the
TV’s remote control sensor.
TV functions strangely when the
remote control is being used.
English
CDX-E400 CD PLAYER
ADDITIONAL INFORMATION
27
0112CRXE400(M).26-29.E
27
02.6.13, 7:17 PM
ADDITIONAL INFORMATION
Specifications
<RX-E400>
<CDX-E400>
Amplifier section
CD player section
Minimum RMS output power per channel
................................................ 55 W + 55 W (6Ω 1kHz 0.1% THD)
.............................. 40 W + 40 W (6Ω 20 Hz to 20 kHz 0.1% THD)
DIN Standard output power per channel (Europe model)
................................................ 60 W + 60 W (4Ω 1kHz 0.7% THD)
Input sensitivity/Impedance
CD/TAPE/MD/AUX ................................................. 150 mV/47 kΩ
Frequency response
CD etc. ..................................................... 20 Hz to 20 kHz, ±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
CD etc. 20 W, 6 Ω ................................................................... 0.04%
Signal-to-Noise ratio (IHF-A Network)
CD etc. (250 mV, Input shorted) ............................................. 98 dB
Output level/Impedance
PHONES ..................................................................... 0.43 V/330 Ω
D/A converter ...................................................................... S-bit DAC
Frequency response ...................................... 2 Hz to 20 kHz, ±0.5 dB
S/N ratio ................................................................................... 102 dB
Tuner section
Tuning range
FM
[U.S.A. and Canada models] ................................ 87.5 – 107.9 MHz
[U.K., Europe, Australia and General models]
.......................................................................... 87.50 – 108.00 MHz
AM
[U.S.A. and Canada models] ................................... 530 – 1710 kHz
[U.K., Europe and Australia models] ...................... 531 – 1611 kHz
[General model] ....................................... 530/531 – 1710/1611 kHz
Sensitivity
FM (S/N 30dB) ....................................................................... 1.0 µV
AM .................................................................................... 300 µV/m
Laser diode properties
•
•
•
•
Material: GaAIAs
Wavelength: 780 nm
Emission duration: continuous
Laser output: max. 44.6 µW*
* This output is the value measured at a distance of about 200 mm
from the objective lens surface on the Optical Pick-up Block.
General
Power supply
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[General model] .......................... AC 110/120/220/240 V, 50/60 Hz
Power consumption ..................................................................... 10 W
Power consumption (standby mode) ......................................... 4.0 W
Dimensions (W x H x D) ..................................... 217 x 108 x 346 mm
Weight ........................................................................................ 3.0 kg
Specifications are subject to change without notice.
General
Power supply
[U.S.A. and Canada models] ................................. AC 120 V, 60 Hz
[Australia model] ................................................... AC 240 V, 50 Hz
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[General model] .......................... AC 110/120/220/240 V, 50/60 Hz
Power consumption
[U.S.A. and Canada models] .................................................. 110 W
[U.K., Europe, Australia and General models] ...................... 125 W
Power consumption (standby mode)
[U.S.A. and Canada models] ................................................... 0.7 W
[U.K., Europe and Australia models] ...................................... 0.8 W
Dimensions (W x H x D) .................................. 217 x 108 x 372 mm
Weight ..................................................................................... 5.4 kg
28
0112CRXE400(M).26-29.E
28
02.6.13, 7:17 PM
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CDX-E400
ATTENTION
L’emploi de commandes, de réglages ou un choix
de procédures différents des spécifications de cette
brochure peut entraîner une exposition à
d’éventuelles radiations pouvant être dangereses.
ACHTUNG
Die Verwendung von Bedienungselementen oder
Einstellungen oder die Durchführung von
Bedienungsvorgängen, die nicht in dieser Anleitung
aufgeführt sind, kann zu einem Kontakt mit
gefährlichen Laserstrahlen führen.
On the rear panel
OBSERVERA
Användning av kontroller och justeringar eller
genomförande av procedurer andra än de som
specificeras i denna bok kan resultera i att du
utsätter dig för farlig strålning.
ATTENZIONE
Uso di controlli o regolazioni o procedure non
specificamente descritte può causare l’esposizione
a radiazioni di livello pericoloso.
PRECAUCIÓN
El uso de los controles o los procedimientos de
ajuste o utilización diferentes de los especificados
en este manual pueden causar una exposición
peligrosa a la radiación.
VOORZICHTIG
Gebruik van bedieningsorganen of instellingen, of
uitvoeren van handelingen anders dan staan
beschreven in deze handleiding kunnen leiden tot
blootstelling aan gevaarlijke stralen.
VARO!
AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ
KATSO SÄTEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.
BETRAKTA EJ STRÅLEN.
0801CRXE400(M).H3
1
02.6.13, 7:26 PM
GB
CRX-E400
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
CRX-E400
Receiver/CD Player
Récepteur/Lecteur CD
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Malaysia
0101CRXE400(M)./H1-H4.E
1
RX-E400
CDX-E400
V922180
02.6.13, 7:30 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising