Converters.TV HDMI Extender Equalizer Operation Manual
Advertisement
Advertisement
HDMI Extender Equalizer
ID # 433
Operation Manual
Introduction
Features
Operating Functions and Controls
Front Panel
The HDMI Extender Equalizer is a high performance cable equalizer allows
HDMI/DVI cable runs up to 50 meters. It corrects digital error and automatically provides equalization up to 40dB to compensate for cable transmission loss, it will eliminate digital noise (sparkles) to ensure you to receive perfect HDTV picture after long cable transmission.
* Fully automatic equalization up to 40 dB at 825 MHz (1.65Gbps), no system control required.
* Extend cable runs up to 50 meters-40 meters from the source to the equalizer plus 10 meters from the equalizer to the projector, TV/monitor.
* Maintains high HDMI single link video resolution up to UXGA/1080p.
* Can be powered directly from the cable. However, it's recommended to use external power adaptor for long cable application.
* HDCP compliant, HDMI is backward compatible with DVI.
* Plug and play, easy to install.
1. HDMI input connector: Connect to the output of your HDMI source equipment.
2. Power input: Connect the supplied DC 5V power supply into this unit.
3. Power LED: The LED will illuminate when the power is connected.
4. HDMI output connector: Connect to the input of your HDMI display.
HDMI Connector
Pin Assignment
Specifications
* Compliant with HDMI 1.2
* HDCP is compliant with HDCP 1.1 downward compatible to HDCP 1.0
* HDCP pass through.
* Operation frequency :
* HDMI data rate:
Up to 165MHz
1.65Gbps(single link)
* Input/Output resolutions:
PC: VGA, SVGA, XGA, SXGA, UXGA up to 165MHz
HD: 480i/576i, 480p/576p, 720p, 1080i, 1080p
* Dimension: 72(D)x 76(W)x 30(H)mm
* Power: 5V center-positive
Note: Connect the long HDMI/DVI cable from the source to the input of
HDMI Extender Equalizer and place the unit next to your display.
Connection and
Installation

Public link updated
The public link to your chat has been updated.
Advertisement