LCS Series Plastic Pictogram Exit Sign FEATURES

LCS Series Plastic Pictogram Exit Sign FEATURES
Type:
Project/Location:
Contractor:
LCS Series
Prepared By:
Date:
Plastic Pictogram
Exit Sign
• Energy efficient, long-life white LEDs consuming 4.2W at normal
DIMENSIONS
Dimensions are approximate and subject to change.
operation
• Dual voltage input capability 120/347VAC
• Selection of AC/DC, 6 to 24VDC or self-powered using a 3.6V
Nickel-Cadmium battery
• Automatic, temperature compensated, pulse type charger
• Low voltage disconnect prevents over discharge of battery
• Automatic brownout protection
• Battery lock-out prevents discharge during installation
• Comes standard with three pictogram legends for direction selection
• Red LED charger monitor
• Injection-molded off-white thermoplastic ABS housing
• Fast and easy installation with snap-together design
• Ceiling, wall or end mount installation
• CSA C22.2 no.141-10 listed
• Comes standard with one (1) year warranty
2-3/16” [5.5cm]
5-15/16” [15cm]
13-5/8” [34.5cm]
< PICTO
LEFT FROM HERE
PICTO STRAIGHT
FROM HERE
PICTO >
RIGHT FROM HERE
POWER CONSUMPTION AND UNIT RATING
MODEL
AC/DC-remote
Self-powered
AC SPECS
120/347VAC
0.5/0.4 A
DC SPECS
4.2/3.6W
6 to 24VDC
Less than 1.5W
Ni-Cd battery
Min. 90 minutes
*NOTE: The LCS Family cannot be combined with other Lumacell products on the same emergency A.C. circuit.
ORDERING INFORMATION
SERIES
LCS
VOLTAGE
-SP= 120/347VAC, Self-Powered (90 mins)
-U= 120/347VAC, 6 to 24VDC
EXAMPLE: LCS-SP
All information and specifications contained in this catalogue sheet are
subject to change due to engineer design, errors and omissions.
© 2014. Thomas & Betts Limited. All rights reserved.
9-1/16” [23cm]
FEATURES
Model No.:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement