Nova M67100-E remote control User's guide

The Nova M67100-E remote control allows you to control up to 4 home theater devices with one easy-to-use, compact remote control. Just install batteries and follow the instructions in "Programming Device Control" to program the Nova remote to control your equipment.

PDF Download
Document
Nova M67100-E Remote Control User's Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Controls up to 4 home theater devices
  • Learning feature
  • Keymover feature
  • Macro programming
  • Channel Lock
  • Volume Lock

Frequently asked questions

Turn on the device you want to control, press the corresponding device key on the remote, press and hold SET until the red LED blinks twice, enter the five-digit code for the device, aim the remote at the device, and press POWER. If the device turns off, you have successfully programmed the remote. If not, try different codes for your device.

Place your Nova remote head-to-head with your original remote control. Press the mode key you want to learn functions on, press and hold SET until the LED blinks twice, enter 9 7 5, press the key on the remote you wish to learn onto, and then press and hold the key on the original remote until the Nova's LED blinks twice. Repeat for each key you want to learn.

Macros are a series of pre-programmed key presses that can be executed with the press of one key. To program a mode-independent Macro, press and hold SET until the red LED blinks twice, press 9 9 5, press the key you wish to assign a macro on, enter the series of commands you want the Macro to execute, and press and hold SET until the red LED blinks twice.

To lock volume control to one mode, press and hold SET until the red LED blinks twice, enter 9 9 3, press the mode key for the device you want to control, and the selected device will control the volume regardless of the current mode. To unlock all volume control, press the mode key for the device, press and hold SET until the red LED blinks twice, enter 9 9 3, and press VOL-.

To lock all channel controls to one device, press the mode key for the device you want to control, press and hold SET until the red LED blinks twice, enter 9 7 3, and press CH+.
Preparing document for printing…
0%