B

I

uetooth

S

peakerphone

User's

man ual

m

I g lu

etooth

C€

(Please

read

this manual carefully and keep

it for

further use)

--

(2) The Red LED light is constantly on during charging the charging is finished.

3. Power On/Off and Language

Select

, and will turn off when

(1 )

Power On: When the

"MFB" for

1 speakerphone second until you hear a is under off mode, press and hold the short beep, then the product will automatically connect with the last mobile phone it connected with

(2) Power Off: when the speakerphone is under standby mode, press and hold the "MFB" for 5 second until you hear a short beep, the product will be shutdown.

Note: After being disconnected with a mobile phone, there will be automatic shutdown after 10 minutes.

(3) Operating

prompt

language selection: when the speakerphone is under standby mode, press and hold the "V+" for 1 second to select the prompt language.

4.Pairing

and

Connection

Prior and to using the Bluetooth speakerphone for the first time, it should be paired connected manually with a Bluetooth mobile phone.

Take the following step to finish the pairing

(

1 ) ln the power off and blue LED status, press and hold the "MFB" for

3 second until the alternately flash, the speakerphone is ready for pairing

(2) Use your mobile phone search and connect this producl "BT Speaker=. password is required, please enter "0000".

red

lf

(3) Dual Connection:After finish the pairing and connection tn the first m^hile+rhoperP{ess-and red and blue LED with a second

ofthe

speakerphone

h.ol-dlh.eiMEB:for3s,ec.ondiulat+Lthe---

flash alternately to enter pairing mode again for pairing mobile phone. Then, turn

offthe

Blueiooth speakerphone, and the mobile hold the "MFB" phone for 1 will indicate Bluetooth disconnection, second to power on the then press and speakerphone again, and it will connect automatically to the above two mobile phones.

Note: After two minutes Pairing not to be finished,the Bluetooth speakerphone will power off automatically

5.Play MP3

(1

) play

/pause:

ln the the music play standby status,

(2) PREV/ NEXT: ln the music play press"MFB" for status, press

1 second, music pause.

1 second, music play; ln status, you can press(V-)button to the PREV song, and press (V+) button to

(3) Volume adjustment: the NEXT song.

press and hold "V+" button or"V-"button to adjustment

6. volume you like.

Using

the Bluetooth

car

kit(Hands-free function)

(1)Answering a call ln the

"MFB" standby status, when there is an incoming call, say "YES" or press the button once to answer the call,or speakerphone will automatically answer phone the phone call after voice report(TTS); in the power off status, when the calling, press "MFB" button once, it will finish power on, connecting,and answering in one time.

(2)Ending a call

While talking, press the "MFB"button once to hang up

This type Bluetooth speakerphone with an elegant appearance and adopts the newest CSR Bluetooth Chip,it adopts HD-Voice and DSP technology, and supports dual connection. With CE and FCC certificat;ons, it is a high quality

Bluetooth speakerphone, it will supply crystal-clear and pure sound quality for you.

This product have a 'Global First'AUTO-answering function, also it is a

High-Quality Bluetooth speakerphone with the TTS(Text to Speech)and voice prompt function.That is design

for

the user high on convenience and freedom, wireless communication, please enjoy using it.

The product is supposed to render your safety and be more convenient while driving, for safety, it is suggested that you focus on driving and use your phone as little as possible.

l.Appearance:

(1

)

Speaker

(2) Microphone

(3) LED(blue and red)

(4) Micro-USB

(5) Multi-function Button(MFB)

(6) Volume lncrease(V+)

(7) Volume Decrease(V-)

2.

Charging

A rechargeable battery is embedded in the product, we recommend charging the battery fully using the charger for 3 hours(approx-) before your first use

(1 ).The embedded battery has low voltage protection. ln case of low battery conditions, the Red LED indicator light flashes once every three seconds.

continued use of the product may reduce the battery Iifespan and standby time.

The system willshutdown when low battery.

(3) Rejecting a call (Voice Control)

When there is an incoming call, press the "MFB" button twice to re.ject the call, or it can rejecting a call just say "NO" after cell-phone ring up and voice report.

(4) Voice dialing

Under the standby mode of the BT speaker, press the "MFB" button once, and say a voice command after you hear a short "beep"sound.

Note:Before using the voice dialing function, please confirm that voice commands have been recorded in your mobile phone. The function may differ for different mobile phones, please refer to your mobile phone instructions

(5)Last number redial

Under standby mode, press the "MFB" button twice successively to dial the number last dialed

(6)Volume adjustment

While talking,

(7) Call press the "V+" transfer or"V-"buttons to adjust for wanted volume

During hands-free conversation, press the "V+"button and the "V-"button simultaneously to transfer the call to the mobile phone.

T.Factory Reset

Under standby mode, press and hold the "V+" and "V-" button for 5 seconds until the red and blue light flash three times simultaneously, the factory reset is done

8. LED

light indication

Standby(connected to Bluetooth device)

The blue liohtflash once everu 6seconds

The red lighlflash once every 3 seconds

Theredandblueliqhtsflashthreetimes

The red light is off

9.N

otes:

(1) This speakerphone is in compliance with specified Bluetooth version. lt does not guarantee compatibility of all functions on every Bluetooth enable device

(2) Do not place or store the speakerphone over the area of the safety airbag deployment, or it may cause serious injury when a safety airbag deploys

1

0.

Technical

Parameters

1. Bluetooth Version: Bluetooth V4.0

2. Operatin g

3. Output

Frequency: 2.4O2GHz-2.480G Hz Sl M

Power: Class 2, '10 meters

4. Protocols supported: HSP and HFP, A2DP, AVRCP

5. Multi-Device pairing: Pairing records with 8 Bluetooth mobile phones

6. Standby time:

1

600 hours/66 days

7.

8.

Talktime: 15-16 hours

Charging time: About

3 hours

9. Charging Voltage: DC 5.0V, 500 mA

10. Battery: 800mAh Polymer Batteries