GV-IO 12-Out Card V3 Specifications

GV-IO 12-Out Card V3 Specifications
GV-IO 12-Out Card V3
With 12 relay outputs, the GV-IO 12-Out Card is designed to work with GV-NET/IO
Card to provide an interface for your external devices such as alarms and gates.
Installation
Insert the GV-IO 12-Out Card to an empty card slot. Connect the 20-Pin Ribbon
Cable to the GV Video Capture Card, the GV-IO 12-In Card, and the GV-NET/IO
Card as shown below.
Specifications
Relay Output
12
Relay Status
Normal Open
USB
Connection
Output
Relay Capacitance
RS-232
125 / 250V AC, 3A
Connection
Packing List
1
GV-IO 12-Out Card x 1
2
20-pin Ribbon Cable with 4 Connectors ) x 1
3
4-Pin to 4-Pin Mini Power Cable x 1
4 Installation Guide x 1
Relay Out 5
Relay Out 6
Relay Out 7
Relay Out 8
Com
Relay Out 9
Relay Out 10
Relay Out 11
Relay Out 12
Com
Relay Out 13
Relay Out 14
Relay Out 15
Relay Out 16
Com
Connect to
GV-NET/IO Card and
GV-IO 12-In Card
30V DC, 3A
DC IN
DC 5V, 1A
Environmental Conditions
0~50 degree C / 32~122 Degree F
5%~95% (non-condensing)
Compatible Card
Models
All GV Video Capture Cards
Dimensions (W x H)
120 x 99 mm / 4.72 x 3.9 in
1 GV-IO 12-Out Card
Note:
1. To prevent the noise interference in I/O operation, tightly screw the GV-IO 12Out Card to the PC case.
2. The GV-IO 12-Out Card must work with the GV-NET/IO Card together.
4-pin to 4-pin
3 Mini Power Cable
2 20-pin Ribbon Cable
GV Video Capture Card
2009.4.10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement