Acrosser Technology AR-ES5432FL Embedded System Installation guide

AR-ES5432FL

Installation Guide

Revision Description Date

1.0 Release 2009/11/19

1

Contents

1 Introduction to AR-ES5432FL ................................................................ 3

1.1 Specifications...................................................................................................3

1.2 Packing List......................................................................................................3

2 Procedure of Assembly/Disassembly................................................... 7

2.1 2.5” Hard Disk Installation...............................................................................7

2.2 Accessory (CF card, Outline bracket) Installation ......................................14

3 Appendix ............................................................................................... 17

2

1 Introduction to AR-ES5432FL

AR-ES5432FL is a Fan-less system product mainly for general industry PC applications.

With powerful Intel CPU core & diverse memory card extension (CF card, SO-DIM),

AR-ES5432FL can satisfy the users requirements in any general industry applications environment, especially in 0 to 60 environment fields. AR-ES5432FL has diverse physical interface in the front panel, such as AUX port, 2×(10/100/1000Base-T) LANs, VGA/DVI connectors, build-in LEDs, 4 USB Ports, 4 COM ports, ATX Power Switch &Remote

Switch/Audio/S-video, DC inlet. In addition, the system provides the capacity for extending

I/O device by option adding WiFi module depends on users needs.

1.1 Specifications

Item Description

System AR-ES5432FL

CPU Board

System Dimensions

AR-B5432 series

250x166x67(mm)

Description Quantity

AR-ES5432FL 1

Power adaptor 96watt DC input 1

Wall Mount Bracket(Including label for isolation )

Compact Disk

SATA Power Cable

SATA Cable

2.5”HDD Bracket module(Screws-8PCS)

WiFi External Cable (Option)

2

1

1

1

1

1

3

System Dissection

(1) Dimensions

AR-ES5432FL 2D Overview

DVI-inlet

(2) Front Panel “I/O”

S-Video AUX VGA LAN1/LAN2 Audio/Remote

Antenna DC Inlet Power Switch CF Card inlet

4

COM1/COM2/COM3/COM4 USB/ HDD&POWER LED

(3) System Configuration

.2

.1

.4

.5

.3

8

7

6

5

11

9

10

Item Description Quantity

1 AR-B5432

2 PW-V9427B

1

1

5

6

Heatsink (for CPU/NB/SB)

Upper Case(including Corners)

7 Bottom Case(including I/O)

3

1

1

1

11

CF Card Bracket

1

1

2

1

1

6

2 Procedure of Assembly/Disassembly

2.1 2.5” Hard Disk Installation

The following instructions will guide you to install HDD step-by-step.

1. Remove the terminal plug from the AR-ES5432FL.

2. Unfasten the screw from top cover of AR-ES5432FL.

7

Unscrew

3. Remove top cover by below photo direction.

Remove

Push

Push

4. Plug SATA cable and power cable into mainboard.

SATA Power connecter

SATA Connecter

8

5. Run the cables through gateway to back side.

Cables gateway

6. Unfasten the screws from HDD door.

Unfasten the screws!!

9

7. Unfasten four screws below to release HDD bracket.

Unfasten the screws!!

8. Insert the rubbers into the HDD bracket.

Install the rubbers on the HDD bracket.

10

9. Place HDD body into HDD bracket and assemble HDD and bracket by 4 screws.

Screws up

10. Insert SATA connecter and SATA power cable into HDD module.

11

11. Place HDD module back into the case.

12. Fix HDD module to the chassis by four screws.

The installing of bracket for HDD

13. Assemble HDD door back by four screws.

Fasten the screws

12

14. Slide the top cover into the bottom case.

Pay attention to make sure top cover has been installed into the notch!

15. Finish the HDD installation after fastening the screw.

Push

Fasten the screw

Push

13

2.2 Accessory (CF card, Outline bracket) Installation z Install CF Card

1. Remove the extending CF’s bracket by unfastening the screws.

2. Install CF card into bracket.

Unfasten the screws

The direction for installing the CF card.

14

3. Install CF card module back to CF socket.

The direction for installing the CF card module. z Install Outline Bracket

1. Install Outline Bracket with case by 4 screws.

15

2.3 WiFi Modules Installation

1. After WiFi bracket release, please assemble WiFi with bracket by fastening 2 screws.

2. Place WiFi modules back to below location and fix it by two screws.

16

3 Appendix

Please don’t change SO-DIMM by yourself. Any disassembly and assembly behavior for the SO-DIMM will cause unexpected damage.

Please do contact with Acrosser customer service center/FAE of changing

SO-DIMM.

Please DON’T disassemble and assemble the SO-DIMM by yourself

17