Black Box LE330C, LE334C, LE331C, LE335C, LE332C, LE336C, LE333C, LE337C FiberLinX Module Hardware Installation Manual

Black Box LE330C, LE334C, LE331C, LE335C, LE332C, LE336C, LE333C, LE337C FiberLinX Module Hardware Installation Manual

Below you will find brief information for FiberLinX Module LE330C, FiberLinX Module LE334C, FiberLinX Module LE331C, FiberLinX Module LE335C, FiberLinX Module LE332C, FiberLinX Module LE336C, FiberLinX Module LE333C, FiberLinX Module LE337C. Black Box Corporation's FiberLinX™ is a media converter designed to convert between 10 Mbps Ethernet twisted pair (10Base-T) and 10 Mbps Ethernet (10Base-FL) single-mode or multi-mode fiber optic cabling.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

FiberLinX Modules LE330C, LE334C, LE331C, LE335C, LE332C, LE336C, LE333C, LE337C Installation Manual | Manualzz

												
											
										
									

advertisement

Key Features

  • Converts between 10Base-T and 10Base-FL
  • IEEE 802.3 compliant
  • SNMP-manageable
  • Remotely manageable
  • Hot-swappable
  • FiberAlert

Frequently Answers and Questions

What is FiberLinX™?
FiberLinX™ from Black Box Corporation is a IEEE 802.3 compliant, SNMP-manageable media converter/LAN extender/Ethernet bridge that can be managed remotely. FiberLinX is designed to convert between 10 Mbps Ethernet twisted pair (10Base-T) and 10 Mbps Ethernet (10Base-FL) single-mode or multi-mode fiber optic cabling.
How do I configure FiberLinX Modules?
FiberLinX Modules have an eight-position Dip switch, located at position S2, for configuring the module.
What is FiberAlert?
Since media converters are a transparent link in a network, FiberLinX features FiberAlert, a troubleshooting feature that assists in pinpointing link faults between media conversion products. If a media converter is not receiving a fiber link, FiberAlert disables the media converter's fiber transmitter, thus mirroring the link status of the opposite end of the fiber.
Does FiberLinX require a crossover connection?
Once a FiberLinX is installed, you can select a crossover workstation or pass-through repeater/hub connection for the twisted pair data port. FiberLinX’s twisted pair data port has one RJ-45 connector for a single shielded or unshielded twisted pair link segment and features a push-button switch, located next to the port, for selecting the type of connection.

Related manuals

Download PDF

advertisement