C860 QUAD OTDR and Certification Test Kit

C860 QUAD OTDR and Certification Test Kit
C860 QUAD OTDR and Certification Test Kit
Features
The Noyes C860 QUAD Certification and OTDR Test Kit from AFL Telecommunications
includes one handheld C840 QUAD OLTS Tester and one C850 QUAD OTDR/OLTS with
built-in auto test functionality. With this kit, technicians can troubleshoot and perform both
Tier 1 and Tier 2 certification tests of MM and SM fiber networks, store results and create
professional test reports.
The C850 is both a QUAD Certification Tester and full-featured QUAD OTDR in a compact
case with a large transflective touch screen display suitable for both indoor and outdoor
operation. The C850 features single-mode and multimode OTDR capabilities, both singlemode and multimode Optical Light Sources (OLS), Visual Fault Locator (VFL, 650 nm), and
an Optical Power Meter (OPM). As an OTDR, the C850 supports Full Auto, Expert (manual)
and Real-Time test modes, simultaneous dual and single wavelength testing, and Event
and Pass/Fail analysis based on default or user-defined thresholds.
The C840 QUAD Certification Tester includes VFL, OPM, and both single-mode
(1310/1550 nm) and multimode (850/1300 nm) OLS. The C840 may be used alone as a
traditional power meter or light source to measure fiber loss or as a visual fault locator to
find fiber breaks.
•• OTDR dynamic range:
- 22 dB (MM)
- 26 dB (SM)
•• Integrated OPM, OLS, and VFL (650 nm)
•• OLS sources:
- LED - 850/1300 nm
- Laser - 1310/1550 nm
•• Full Auto, Expert, Real-Time OTDR test
modes
•• Large transflective (indoor/outdoor) touch
screen display
•• Tool-free, switchable test port adapters
•• Rechargeable Li-Ion battery (> 8 hours)
or AC power
•• USB host and function ports
•• Bellcore (GR-196) .SOR file format
•• Internal (1000s tests) and USB storage
•• Wave ID detect if used with Noyes Wave
ID series light sources
•• Windows® compatible software
Applications
•• Tier 1 and Tier 2 testing of premise
networks
•• Bi-directional two fibers and single fiber
test capable
•• Perform Pass/Fail Event and Link
measurements
•• Find faults using integrated Visual Fault
Locator
•• Splice verification
•• Measure loss and length of fiber links
•• Certify fibers using Pass/Fail criteria of
industry standards, applications and
user-defined thresholds
•• Create professional certification reports
Continued on the next page
© 2008-2009, AFL Telecommunications, all rights reserved. C860-00-2000 Revision 1F, 2009-10-12
Specifications are subject to change without notice.
1
C860 QUAD OTDR and Certification Test Kit
The C840 and C850 can be used together to perform Tier 1 dual
wavelength MM (850/1300 nm) and SM (1310/1550 nm) auto
loss tests of one or two fibers in one or both directions as well
as measure both loss and length of the fibers and compare to
industry standards (TIA/ISO/EN), applications and user-defined
thresholds values to certify the fibers. Either unit can be identified
as the Main or Remote.
The user may test two fibers at two wavelengths bi-directionally
and store the results into the main unit. Featuring rich file naming,
the Job setup wizard allows the user to define both the cable and
fiber end locations, creating easily identifiable trace files, which
are managed into Job and Cable folders.
Ordering Information
When placing an order, select options as follows: Model, Optical Configuration, Language, and Case.
Example: C860 — 100 — LP1 — H5
C860
NNN
LLL
CC
Case (CC)
H2 = Hard and soft case with SC-LC test
and cleaning accessories
H5 = Hard and soft case with SC-ST test
and cleaning accessories
Language (LLL)
LP1 = Language Pack: English, German,
French, Spanish, Italian, Portuguese
JPN = Japanese/English
CHI = Chinese/Taiwanese/English
RUS = Russian/English
KOR = Korean/English
ARA = Arabic/English
Model
C860
Optical Configuration (NNN)
100 = QUAD 850/1300 nm MM and 1310/1550 nm SM
Continued on the next page
© 2008-2009, AFL Telecommunications, all rights reserved. C860-00-2000 Revision 1F, 2009-10-12
Specifications are subject to change without notice.
2
C860 QUAD OTDR and Certification Test Kit
Ordering Information (continued)
Each kit includes one handheld C840 QUAD Certification Tester, one compact C850 QUAD OTDR/OLTS, USB Flash drive, PC software for
OTDR trace analysis and certification or OPM loss reporting, (2) AC adapters, switchable test ports adapters, and accessories (see table
below).
Model
carry Case
Fiber
Rings1
Test
Cords2 OTDR/OLS
Adapters
OPM
Cleaning Products
VFI
C860-100-LP1-H2
Soft and hard cases
SC/LC
SC/LC
SC, ST, LC
SC, 2.5, 1.25mm
2.5, 1.25mm One-Click Cleaner SC/ST/FC, 2.5mm
One-Click Cleaner LC, 1.25mm
Cletop - SB white tape
C860-100-LP1-H5
Soft and hard cases
SC/ST
SC/ST
SC, ST, LC
SC, 2.5, 1.25mm
2.5, 1.25mm One-Click Cleaner SC/ST/FC, 2.5mm
Cletop - SB white tape
1 (2) each - 150m (62.5µm, 50µm, SM)
2 (4) each - 150m (62.5µm, 50µm, SM)
C860—100—LP1—H2 (or H5) Kit Contents
Optional OTDR and Cleaning Accessories
Item
Description
Model Number
Description
C850
QUAD OTDR/Auto Test Certification Tester
FR1-SM-150-SC-FC
Fiber ring, single-mode, SC/FC, 150 m
C840
QUAD Auto Test Certification Tester
FR1-SM-150-SC-LC
Fiber ring, single-mode, SC/LC, 150 m
Adapters
OTDR and OLS ports — SC, ST, LC
OPM ports — SC, 1.25 and 2.5mm Universal
VFI ports — 1.25 and 2.5mm Universal
FR1-M6-150-SC-ST
Fiber ring, multimode, 62.5mm, SC/ST, 150 m
FR1-M6-150-SC-LC
Fiber ring, multimode, 62.5mm, SC/LC, 150 m
Fiber Rings (6)
150 m (62.5mm, 50mm, SM)
FR1-M5-150-SC-ST
Fiber ring, multimode, 50mm, SC/ST, 150 m
Jumpers (12)
2 m (62.5mm, 50mm, SM)
FR1-M5-150-SC-LC
Fiber ring, multimode, 50mm, SC/LC, 150 m
Miscellaneous
Accessories
Mandrels (2) — 62.5mm, 3mm jacket
FR1-L5-150-SC-LC
Fiber ring, laser optimized, multimode, 50mm, SC/LC, 150 m
FR1-L5-150-SC-SC
Fiber ring, laser optimized, multimode, 50mm, SC/SC, 150 m
FR1-SM-500-SC-LC
Fiber ring, single-mode, SC/LC, 500 m
FR1-SM-500-SC-SC
Fiber ring, single-mode, SC/SC, 500 m
FR1-SM-500-SC-FC
Fiber ring, single-mode, SC/FC, 500 m
8500-20-0900
Wet Cleaning Kit for SC/FC/ST/LC Connectors
8500-05-0001MZ
One-Click Cleaner SC/ST/FC
8500-05-0002MZ
One-Click Cleaner LC/MU
8500-10-0017MZ
Replacement tape for Cletop (white)
Mandrels (2) — 50mm, 3mm jacket
Stylus pens for touch screen
USB thumb drive, 1G
USB to mini-USB cable
Small plastic parts box (2) to store adapter caps and mandrels
AC adapter (2), specify country of use
Cleaning
Accessories
(2) One-Click Cleaner SC/ST/FC, 2.5mm
One-Click Cleaner LC/MU, 1.25mm (H2 kit only)
Note: 1000 m single-mode fiber rings are also available.
Cletop SB white tape
Cases
Hard transit case — holds C850, C840, and above accessories
Soft case for C850
Documentation
User guides and quick reference guides
Report Software PC software and user guide
Continued on the next page
© 2008-2009, AFL Telecommunications, all rights reserved. C860-00-2000 Revision 1F, 2009-10-12
Specifications are subject to change without notice.
3
C860 QUAD OTDR and Certification Test Kit
Specifications
(All specifications valid at 25°C unless otherwise specified)
OTDR
Multimode
Single-mode
Emitter Type
Laser
Safety Class
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Center Wavelengths
Wavelength Tolerance
850/1300 nm
1310/1550 nm
± 20/30 nm
± 20/30 nm
22 dB
26 dB
Dynamic Range (SNR = 1)
10, 30, 100, 300 ns; 1, 3, 10 ms
Pulse Widths
Range Settings
250 m to 64 km
Sampling Points
250 m to 208 km
0.25 m
Group Index of Refraction (GIR)
Safety Class
±0.25
2
dB, dBm, mW
Yes (to -47 dBm)
Set Reference
Yes
Data Storage
Yes
Tone Detection
Yes (to -47 dBm)
± (1 + 0.005% x distance + data point spacing)
general
C850 OTDR
C840 Tester
± 0.05 dB/dB
Test Modes
OTDR (Full Auto, Expert,
Real-Time), Auto Test, OPM,
OLS, VFL
Auto Test,
OPM, OLS, VFL
SR-4731 (GR-196-CORE
Appendix A, B; SR-4731)
N/A
1 Typical distance between the two points 1.5 dB down each side of a reflective
spike caused by a -45 dB event using 10 ns pulse width.
2 Typical distance from event location to point where trace is within 0.5 dB of
backscatter caused by a -45 dB event using 10 ns pulse width.
3 Does not include GIR uncertainty.
Emitter Type
+6 to -60 dBm
Accuracy 1
1.4000 to 1.6000
Linearity
Light Source
Available Wavelengths
InGaAs 2mm
Measurement Range
1 Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
2 Automatic wavelength identification and switching when used with Noyes Wave
ID Series Light Sources.
Up to 16,000
Min. Data Point Spacing
850, 1300 1310, 1490, 1550, 1625 nm
Detector Type
Wavelength ID
9m
Attenuation Dead Zone 2
Calibrated Wavelengths
Measurement Units
1.5 m
Event Dead Zone 1
Distance Uncertainty (m) 3
Power Meter
Multimode port
850/1300 nm (nominal)
Single-mode port
1310/1550 nm (nominal)
LED
Laser
Trace File Format
Length Measurement Range
Data Storage
> - 20 dBm, 62.5µm
MM 1
0 dBm, 9µm SM
Stability (after 15
minutes warm up)
± 0.1 dB over 1 hour
± 0.07 dB over 1 hour
± 0.15 dB over 8 hours
Wave ID Transmit
Yes
Tone Generation
270 Hz, 330 Hz, 1 KHz, 2 kHz
USB flash drive (2.0)
Data Storage Capacity
USB
Tool Free Adapters
Modular cleanable SC/ST/LC
Weight
Safety Class
Class II FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Wavelength
650 nm
Output Power (nominal)
0.8 mW
23 x 11 x 7 cm
(8.8 x 4.3 x 2.8 in)
2.3 kg ( 5 lb)
0.9 kg (2 lb)
-10 to +50°C, 0 to 90% RH (non-condensing)
Storage Temperature
-20 to +60°C, 0 to 90% RH (non-condensing)
Battery Life 1
Recharge Time 2
Laser
27.4 x 19.3 x 7.1 cm
(10.8 x 7.6 x 2.8 in)
Operating Temperature
Power
Visual Fault Locator
Internal > 1000 fibers
Data Transfer to PC
Size
1 Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped
jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
Emitter Type
Internal flash memory
Downloadable from unit directly to PC
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Output Power
5 km (MM);
200 km (SM)
Display
Rechargeable Li-Ion or AC power adapter
> 8 hours continuous testing
4 hours
16.51 cm (6.5 in),
color, transflective
9.65 cm (3.8 in),
color, transflective
1 Typical, depending on display brightness.
2 Typical, from fully discharged to fully charged state, unit may be operating.
External battery charger available.
© 2008-2009, AFL Telecommunications, all rights reserved. C860-00-2000 Revision 1F, 2009-10-12
Specifications are subject to change without notice.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement