Digi ConnectPort X2e Smart Energy Quick Start Guide

1 Verify the kit contents
Quick Start Guide
ConnectPort X2e
Smart Energy
®
Power supply
Ethernet cable
*
ConnectPort X2e SE
2 Write down device information
Write down the following information (located on the back of the device), which you will use in step 5.
Serial Number: ________________________________
EUI64: ______________________________________
Install Code: _________________________________
NOTE: The serial number is also the
Ethernet MAC address.
Model: ConnectPort X2e SE
Part Number: X2E-Z1C-E1-A
Serial Number: 00409D 50E9BB
E
X2e S
-A
tPort
nnec E-Z1C-E1 BB
l: Co
2
9
Mode mber: X 409D50E
Nu
r: 00
e
b
Part
m
l Nu
a
ri
e
S
1410
526B
200
13 A
1234
4: 00
BCD
EUI6
34 A
D 12
: ABC
e
d
o
ll C
Insta
EUI64: 0013 A200 526B 1410
Install Code: ABCD 1234 ABCD 1234
3 Connect the hardware
Connect the power supply. The Power LED lights green and the Network LED blinks orange.
b NOTE: Once the device is connected to Device Cloud, the Network LED changes to green.
Button
Power
ZigBee
Network
4 Add the router to the network (router models only)
This step is for router models only. If you have a coordinator model, proceed to step 5.
Add the router variant to the Smart Energy network. Contact the utility company or owner of the Smart Meter if you are unsure
how to add a router to the network.
NOTE: Make sure the router is powered ON when you add it to or remove it from a Smart Energy network.
5 Connect to Device Cloud and form a Smart Energy network
a
Go to devicecloud.digi.com.
b
Sign up or log into your Device Cloud account as follows:
- New users: Click Sign Up and create a free account. You can upgrade at any time.
- Existing users: Log in with your username and password.
c
To add your gateway to the device list, in Device Cloud click Device Management > Devices.
d
Click Add Devices. From the Add Devices window:
- To automatically discover the gateway: Click Discover to discover gateways on the local LAN/network.
- To manually add the gateway: Next to the MAC address field, enter the gateway MAC address
(for example: 00409D:XXXXXX) and click Add.
e
To form or provision a Smart Energy Network, go to https://digi-se.appspot.com and log in using your Device Cloud
credentials, then proceed as follows:
1 Navigate to the Debug tab.
2 Select a gateway from the Gateway drop-down menu.
3
Select the RPC_ZigBee_Interface menu (on the left).
4 Click add_device.
5 Type the EUI64 address and install code for the device.
6
f
Click Execute.
To display device readings and related data in App Spot, navigate to Network > Tree or to Network > In-Home Display.
6 Next steps
For more details about adding devices, go to: https://digi-se.appspot.com/edocs/getting_started/adddevices.html.
For more details about Device Cloud, go to:
- User guide: http://ftp1.digi.com/support/documentation/html/90001150/index.html
- Programming guide: http://ftp1.digi.com/support/documentation/html/90002008/index.html
7 ConnectPort X2e LEDs
Power
Status
Description
OFF
No power
Solid green
Device is powered
ZigBee
Status
Description
OFF
Radio is disabled
Blinking green (slow)
Searching for other ZigBee devices on the network
Blinking green (fast)
Establishing a Smart Energy network
Solid green
Connected to a Smart Energy network
Network
Status
Description
OFF
Powered OFF
Blinking yellow (slow)
Powered ON, no Wi-Fi link
Blinking yellow (fast)
Wi-Fi link, no IP address
Solid yellow
IP address assigned
Blinking green (slow)
Attempting a connection to Device Cloud
Blinking green (fast)
Device Cloud server found, authenticating
Solid green
Connected to Device Cloud
For help, call:
U.S. or Canada: 866.765.9885
Worldwide: +1 801.765.9885
Or visit us on the web:
Support: www.digi.com/support/eservice
Forums: www.digi.com/support/forum/
© 2015 Digi International Inc. Digi, Digi International Inc., ConnectPort, and the Digi logo are trademarks or registered trademarks of Digi International Inc., in the United States and other countries worldwide.