Elko eLAN-RF-003 Instruction manual

Elko eLAN-RF-003 Instruction manual
WIRELESS CONTROL
SYSTEM
www.elkoep.com
ELKO EP COMPANY PRESENTATION
COMPLEX SOLUTIONS FROM A SINGLE MANUFACTURER!
The company ELKO EP, a Czech manufacturer of modular electronic
devices, has been your partner in wired and wireless solutions for
over two decades. Our product range has undergone dynamic development, from simple manufacture of modular devices to developing
and implementing wireless solutions and sophisticated wired intelligent systems including multimedia control throughout your entire
home.
In the past year, we also achieved great progress in getting our systems to communicate with each other, which brings you unlimited
possibilities and variations of electrical installations custom-made
for your home. A major advantage and founding pillar of our work is
our own development capacities and facilities, enabling us to have
immediate interaction between you - our customers - and ourselves.
We flexibly fine-tune all our products to satisfy not only strict standards, but especially their users in everyday life.
Right now, we are working intensively on interconnecting all of our
systems, and we are designing wide-ranging solutions for both new
home constructions and existing wiring schemes. We are all accustomed to different standards, and everybody has the chance to raise
theirs a few notches higher. We also feature our rich portfolio of control elements, including the award-winning wireless device RF Touch,
elegant switches and outlets in a unified and timeless design, and the
option of control through security keypads, notebooks, smart phones or iPADs. This is all possible, and at ELKO EP, it has now become a
reality.
RELAYS - Modular electronic devices
www.elkoep.com
A wide range of electronic modular devices, which bring new possibilities to home and office control, monitoring and security, as well as to industrial process control: time relays, installation contactors, staircase automatic
switches, time switches clocks, dimmers, thermostats, power supplies units, control and signalling devices,
GSM gates, etc.
iNELS - Intelligent Electrical Installation System
www.inels.com
iNELS will transform your house into a timeless intelligent household. It will take charge of heating and air-conditioning regulation, lighting control and home appliance switching, while also providing perfect security for your
home. Enjoy controlling your entire house via a TV screen thanks to iNELS Multimedia (iMM) or use the elegant
iNELS Touch Panel (iTP).
iNELS RF Control - Wireless control
www.inels.com
A unique wireless control system providing you perfect control over your home! The RF Control system enables you to
control functions such as heating, lighting, electrical appliances and window shutters, all with a single touch. No demolition work, fast and easy installation, exclusive design of wireless wall switch buttons and other components.
LOGUS90 - Home switches and sockets
www.logus90.com
We offer you exclusive switches, sockets and accessories in a standard plastic or metallic finish. However, there
are also charming luxury frames from purely natural materials such as genuine wood, metal, granite or hardened
glass. Be exceptional!
SOLUTION FOR EVERYONE
WIRELESS TOUCH
CONTROL UNIT
MULTIMEDIA EXTENSION
RF KEY
INTELLIGENT ELECTRICAL
INSTALLATION SYSTEM
WIRELESS CONTROL UNIT
WITH DISPLAY
RF PILOT
WIRELESS SYSTEM
MORE TIME FOR YOUR LOVED ONES
With an intelligent wired/wireless
solution, you have more time available for truly important moments. You
can set the heating regulation up to
a week ahead of time. Your home will
take care of itself. The so-called vacation mode assures that your house will
not freeze in the winter, but will not
heat excessively either. You will also
value the arrival/departure functions
- where after entering a code at the
entrance door, the individual mode of
the recognized user starts.
LIGHT AT YOUR SERVICE
You can centrally switch, dim or create
light scenes for all lights both outside
and inside the home. We can dim all
light sources (energy-saving, LED or
fluorescent lamps, RGB strips). The arrival/departure function relieves you of
having to check the whole house to
see if you have really turned everything
off. And when you simply have to leave
in a hurry, you have control over lights
thanks to remote Internet access - you
see that your lights are not needlessly
wasting energy.
HOME SWITCHES AND
SOCKETS LOGUS90
WE SEE TO YOUR SECURITY
The system contains an alarm that can
be connected to a security agency. Select simple home access - under the
code on the keypad or via chip card.
You now no longer need to worry
about losing your keys - just change
the code from time to time. You can
password-protect your home in many
levels (ex. preventing child access for
safety reasons). Your home will inform
you by SMS on changes to the status
of your home.
A NEW WAY TO LOOK AT TELEVISION
We offer you the possibility of controlling the entire house through the television screen (regulation of lighting,
heating, blinds - i.e. all elements connected in the iNELS system). You can create the plan for the room, floor or entire
home just the way you like. Thanks to
IP cameras, you have a clear view of
what‘s going on in front of the house,
in the children‘s room, or garage. You
can see what your kids are currently
watching on TV in the other room. You
can also open the door remotely for invited visitors.
iNELS SMART HOME SOLUTIONS
We present you iNELS smart home solutions - it is a new brand of electrical solutions,
including wireless and bus wiring system. With regard to the new possibility of combination these two solutions, we decided to create a brand that captures the dynamism,
versatility, versatility, flexibility and also intelligence.
CHOOSE FROM 20 REASONS THE ONES THAT MAKE YOUR LIFE EASIER!
10 REASONS TO OPT FOR BUS SYSTEM
1) ideal solution for new buildings
2) two-wire bus
3) bus once stretched you can always expand
4) security system, combined with detectors
5) remote control (PC, mobile phone applications)
6) imitation of presence
7) regulation depending on the weather
8) ecology and energy saving
9) modern trends in controling
10) media under control (can also be controlled via TV)
10 REASONS TO OPT FOR WIRELESS SYSTEM
1) installation without breaking the walls
2) could be moved any time - elements are not kept by wire but by the waves
3) any time expandable - actuators and drivers can increase exponentially
4) appropriate to existing installations
5) variable control - switch, keychain, remote control, touchscreen unit
6) centralized control - thanks to RF Touch
7) planning for the week ahead
8) combination with detectors - motion, smoke, opening windows/doors
9) controlling actuators as a group with a single touch
10) luxurious design
SYSTEM INFRASTRUCTURE
Air conditioning
Thermal pump
VideoZone 1
HDMI
Converter
RS485(232)/
Ethernet
RS232
Weather station
Satellite
VideoZone 2
iMM Client
Gyroscopic
controller
Gyroscopic
controller
iMM Client
iNELS Touch Tablet
iTP-B flush mounted
RS232
optik cable
Streamer
Zesilovač
IP outdoor
video camera
Miele
AD
iNELS Touch Tablet
iTP-T (Android)
IP indoor
video camera
Wifi
iNELS
Mobile
Switch
Wifi
Internet
Wifi
Door lock
Audio Zone
player
PC/Notebook
Router
BUS SYTEM
Door communicator
Central unit
iMM Server
(data storage)
GSM
communicator
Controlling
illumination
Dimming
lights
Controller for
shutters, blinds
Temperature
control
Switching
appliances
25.2 °C
Control touchscreen
device
4-channel
wall switch
Digital temperature
controller
Remote control
with display
4-channel remote
control
Temperature actuator
Detectors
RF AP/USB
/USB
For communications
with wireless system
Switching actuator
Dimming actuator
Roll-blind actuator
WIRELESS SYSTEM
Touchscreen
unit EST-2
CATALOGUE CONTENT
Wireless control system
Wireless communication via RF system
Overview of RF Control wireless elements
RF transmitters
Controllers
RF Touch-W - touch control unit for mounting on the surface
RF Touch-B - touch control unit for mounting in an installation box
RF Pilot- Remote Controller with display
RFAP/USB - Flash drive with USB Virtual Touch NEW!
RF iNELS/USB - Flash drive NEW!
RF KEY - 4-channel remote controller as a Keychain
RFWB-20/G - 2-channel wireless wall switch button in LOGUS90 design
RFWB-40/G - 4-channel wireless wall switch button in LOGUS90 design
RFTC-10/G - Digital temperature regulator in LOGUS90 design
Converters
RFIM - 20B - Universal transmitter module under switch/button
RFIM - 40B - Universal transmitter module under switch/button
RFSG - 1M - universal transmitter module. Supply voltage 230V, 1-module design
RFTI - 10B - wireless temperature sensor, MINI design
Elan-RF-003- Converter Ethernet to RF signal NEW!
RFGSM-220 - multifunction GSM communicator NEW!
Repeater
RFRP - 20 - signal repeater in a wireless socket box
RF meter
RFPM-1 - electricity meter NEW!
Detectors (see Overview of RF Control wireless elements, page 12)
RF receivers
Shutter actuators
RFJA-12B /230VAC -2x switching 8A relay with protection
RFJA-12B /24VDA - contactless switching
Dimming actuators
RFDSC-11 - single-function dimming socket, button dimmer NEW!
RFDSC-71 - multifunction dimming socket, 7 functions NEW!
RFDA-11B - single-function dimming actuator, 1 light scene
RFDA-71B - multifunctional dimming actuator, 7 functions
RFDEL-71B - RF dimmer for LED lamps and dimmable energy-saving fluorescent tubes
RFDA-73M/RGB - dimming actuator for dimming LED and RGB LED strips NEW!
Switching actuators
RFSC-11 - single-function switched socket NEW!
RFSC-61 - multifunction switched socket, 6 functions NEW!
RFSA-11B - 1-channel single-function switching actuator
RFSA-61B - 1-channel multifunction switching actuator
RFSA-62B - 2-channel multifunction switching actuator
RFSAI-61B - jednokanálový multifunkční spínací aktor s externím vstupem NEW!
RFSA-61B - 1-channel multifunction switching actuator, module design
RFSA-66M - 6-channel multifunction switching actuator, module design
RFUS-11- single-channel single-function switching actuator with enhanced IP65 protection NEW!
RFUS-61- single-channel multifunction switching actuator with enhanced IP65 protection NEW!
Temperature actuators
RFSTI-11B - switching actuator with temperature sensor
RFSTI-11/G - switching actuator with temperature sensor, LOGUS90, manual control
RFATV-1 - Wireless thermostat NEW!
Analog actuator
RFDAC - 71B - actuator with analog output 0(1) – 10V
Accessories
ALPHA AA 0–10V - Thermostat, DIML - dimmable control gear
Temperature sensors, internal antenna, external antenna AN-E
Additional information
RF SETS - transmitter and receiver combinations
Easy and quick program setting
Use instructions and product dimensions
Product loadability
Wireless solution for your electrical installation
8-11
12-13
14-15
14-15
16-17
18
18
19
20
20
21
22
22
23
24
25
26-27
28
29
30
30
31
31
32
32
33
34-35
36
36
37
37
37
38
39
39
40
40
41
41
42
43
44
45
46
47
48
49
50-51
WIRELESS SYSTEM
Your house at one touch
WIRELESS TOUCH
SCREEN CONTROL UNIT
RANGE
R
ANGE
Switching
electrical
devices on/off
200 m
Light
dimming
RF PILOT- REMOTE CONTROL
WITH DISPLAY
FREQUENCY
FREQU
ENCY
ENCY
Heating
regulation
868 M
MHz
Hz
Air-conditioning
control
Shutter
control
Detector
control
WIRELESS COMMUNICATION
What does wireless control bring you?
• Switching of appliances or electrical devices remotely
• Dimming lights, light scenes
• Controlling shutters, awnings, outdoor blinds and
blinds between windows
• Controlling access gates, garage doors
• Manual or automatic control - according to set
program
• Switching appliances in relation to reaction of
employed detectors
• Reaction to (unwanted) opening of a window or door
• Reaction to movement of persons (wanted and
unwanted)
• Energy savings due to regulation of lights and heating
•
Installation is performed simply without any holes or cutting
into the wall. Units (actuators) can be installed directly into a
suitable installation cabinet, into a light cover, switchboard and
anywhere the installation allows.
•
Flexible placement: ideal for installing in existing buildings, for
reconstructions and new constructions as well: with the iNELS
RF Control, you are not bound to the location of the switch, ex.
when rearranging furniture. You can affix the wireless switch to
glass, to a beam or just set it on the night stand and move it
around wherever you like.
RF TOUCH FOR COMFORTABLE CONTROL
WITH A SINGLE TOUCH
ILLUMINATION
FROM ANY CHOSEN
SPOT
•
Controlling lights from the terrace or opening the garage?
Keychain - the remote control that you always have handy.
•
The universal transmitting module converts up to 4 potential
free external inputs (buttons) to an RF signal, thereby enabling
connection into the system of existing devices: home switches or
buttons, fire alarm sensor (passive IR, smoke, door detector, etc.),
doorbell, etc.
•
OASiS detectors can also be used for control, which react to
motion, door or window opening, temperature increase, etc.:
it is thus possible for example to automatically switch on light
when someone passes by, or switch off heating when a window
is opened.
•
Protection of property and security. A flood, temperature, fire
detector or gas leak detector sends a command to the actuator,
which shuts off the water or gas intake, starts the fans, etc.
•
It enables controlling and setting of various light scenes, simulation of sunrise or sunset. It is also possible to control blinds,
shutters, awnings, gates or barriers and switch appliances and
electrical devices.
•
These transmitters (wireless switch or keychain) do not need an
external power supply (they are battery-powered).
•
Receivers (actuators) are installed into an installation cabinet,
under an existing switch, into a light cover, above a ceiling or DIN
rail mounted into a switchboard.
Flat wireless switch for placing on glass, cladding, furniture, etc.
Quick change of location when moving, etc.
•
Elegant design of wall controller in plastic, glass, wood, metal
and granite.
•
Wireless sockets - simple solution for dimming lamps, lights and
appliances connected in the socket (Use the switch to select the
type of dimmed source: R, L, C, LED, ESL)
Simplicity, high-quality materials and modern design characterize the
LOGUS90 series. This series offers both the plastic design frame, as well
as a luxury design in natural materials, noble metals, hardened glass,
wood, granite. Besides wireless controllers, classic home switches and
sockets are also available in this design.
CONTROL OF LIGHT
SCENES
868 M
868
MHz
Hz
ILLUMINATION WHEN
PASSING THROUGH
.
CHOOSE YOUR STYLE . . . *
French, Schuko, and British plug design.
* For controlling wall switches, you can connect existing controllers to the system (using
universal input modules) or use flat wireless buttons in the LOGUS90 design .
8
BY SYSTEM iNELS RF CONTROL
CONTROL OF BLINDS
AND SHUTTERS
Range up to
200 m
control touch screen unit of the
wireless iNELS RF Control
RF Touch brings comfortable control and a clear view from
one location• Other RF units are thus connected into a single intelligent wireless system. You can set the heating, switching, dimming, and blinds control or adjust them to meet
your needs and wishes. Setting and controlling the status of
units is performed using the device touch screen display.
RF Pilot - remote control with display
RF Pilot communicates with all wireless elements of the
iNELS RF Control system: it switches and dims lights in
the whole house, it raises and lowers blinds, shutters and
awnings, it enables group control of receivers (one press
of a button performs multiple commands at once), as well
as creation of your own menu and naming your controlled
devices.
Transmitters
Wireless switches serve as transmitters to control receivers of
the iNELS RF Control system.
SWITCHING ELECTRICAL
APPLIANCES AND
EQUIPMENT
Multifunction receiver - up to 7 programs
Receivers are produced according to their main function as
switching actuators, dimming actuators and shutter actuators.
Switching receivers can switch up to 16A, a relay is used
with an AgSnO2 contact, enabling switching of other bulb
light sources as well. You can utilize the switch function in
basic design - switch on / switch off, or in multifunction design, offering up to 6 functions: button, switch on / switch
off, impulse relays, delayed return, delayed start. Switching
actuators in module design are equipped with an antenna different for assembly into plastic and metal switchboards.
Dimmers are designed as universal (RLC) with load type
auto-detection. They enable dimming of ordinary bulbs,
halogen lamps, low-voltage halogen lamps 12 V powered
through an electronic and toroidal transformer. In its basic
design, the dimmer offers the program “light scene” and
OFF function - in multifunction up to 7 programs: 4 variations of light scenes, simulation of sunrise and sunset, function ON, OFF.
DIMMING LAMPS
AND LIGHTS PLUGGED INTO A SOCKET
NEW!
You can easily connect the wireless system with multimedia
to enjoy endless entertainment to the fullest!
RF PILOT COMMUNICATES WITH
ALL WIRELESS ELEMENTS OF
THE INELS RF CONTROL SYSTEM
PETRA
ARBORE
AQUARELLA
CRYSTAL
METAL
BASE
9
YOUR HOME IS UNDER CONTROL
RF TOUCH SCREEN CONTROL UNIT
MULTIFUNCTIONAL GSM COMMUNICATOR
The GSM communicator can be used in three
ways for remote switching of heating, lights,
3M
barriers, gates and ascertaining the status of
the RF Control actuator:
RFGSM220M
- independently
- with RF Control actuators
- with the RF Touch unit
Is a touch screen control unit of the iNELS RF Control
system, which keeps your home under control. It offers
complete control over heating, switching electrical
appliances and devices, dimming lights or controlling
blinds. All this comes with the option of setting a
weekly program, all automatically and wirelessly.
Controlling is performed via the touch display in luxury
design in the LOGUS90 frame.
DIMMING ACTUATOR
Setting light functions ex.:
dimming lights for creating
atmosphere for watching TV,
smooth run up or run down of
light. Quick solution - dimming
socket RFSC-11B, RFSC-61B.
RFDSC11 RFDA11B
RFDSC71 RFDA71B
ANALOG ACTUATOR
In combination with dimmable control
gear for dimming fluorescent lights
and setting light scenes, 1-10 V. In
combination with thermostat for heating
regulation, 0 - 10 V.
RFDAC71B
DIMMING ACTUATOR
Serves for dimming an LED, LED strip
and RGB.
LED strip with power supply 12-24V DC.
Enables setting of colored light scenes.
3M
RFDA73M /
RGB
WIRELESS DETECTORS
OASiS detectors can also be used for
automatic control, which react to
motion, opening of a window or door or
drop in temperature (ex. motion sensor
switches on the light, window detector
blocks heating or air-conditioning).
JA80P
WIRELESS ACTUATOR WITH TEMPERATURE SENSOR
It measures the temperature by internal
or external sensor and switches a heater
according to a set program or manually.
In the LOGUS90 design.
ny
Scé ory
i
Akt tnost
Mís
é
en
líb
Ob zyk
e
Ja
rekc
Ko
JÍT
ODE
RFSTI11/G
WIRELESS SWITCHES
SHUTTER ACTUATOR
Driver for controlling blinds,
awnings, shutters, garage
doors, etc.
RFJA12B
10
They control switching and dimming
lights, blinds, shutters, electrical
appliances, etc. Their flat base enables
you to place it anywhere - on glass,
the wall, a beam, cladding, etc. In the
LOGUS 90 design.
RFWB20/G
RFWB40/G
T
OLI
ZV
ní
íze
TRANSMITTERS
are elements of the iNELS RF Control system that are used to
control receivers. Thanks to the battery power supply, you can
place them anywhere.
RF Touch - Wireless touch unit
USB - Virtual Touch
RF Touch-W
RF Touch-B
RF PILOT
Remote control with display
RF KEY/B
Keychains
KEYCHAIN
Controlling garage doors,
awnings, shutters and lights
with the help of transmitter keychain
RF KEY/W
RF KEY
TEMPERATURE SENSOR
It scans the current temperature
at the installation site (on the
balcony, terrace) and the values are
displayed on the RF Touch display.
RFTI10B
°C
ELECTRICITY METER
Combination of remotely
controlled socket and electricity
meter.
RFWB-20/G
RFWB-40/G
Wireless switches
RFTC-10/G
Digital temperature
regulator
RFIM-20B
RFIM-40B
Universal transmitting
module
RFSG-1M
Universal transmitting
module
RFTI-10B
Temperature sensor
RFRP -20
Signal repeater in wireless
socket box
JA-80P
JA-81M
JA-82M
Wireless detectors OASiS
1M
ΣE
E
RFPM1
Σ€
DIGITAL TEMPERATURE CONTROLLER
Digital temperature controller that
you can use to simply and quickly
adjust room temperature even
outside the set program.
RFTC10/G
RECEIVERS
are elements of the iNELS RF Control system. They control the
required electrical device or appliance with the help of signal from
the transmitter or according to the program set in the RF Touch unit.
Shutter receivers
UNIVERSAL TRANSMITTING MODULE
Universal module, which can
make any switch wireless.
RFJA-12B/230V RFJA-12B /24V DC
Dimming receivers
into wiring
box
RFIM20B
RFIM40B
into a socket
RFDA-11B
RFDA-71B
RFDSC-11
RFDSC-71
SWITCHING TEMP. SENSOR
It measures the temperature by internal
or external sensor, then sends temp.
information to RF Touch, which gives the
signal to switch on heating.
into switchboard
RFDEL-71B
Switching receivers into
a wiring box
RFSTI11B
RFSAI-61B
SWITCHING ACTUATOR
Actuators serve for switching appliances, sockets
and electrical devices. Option of controlling by
all transmitters. -RFSAI-61B for external control
with a classic button. Quick
solution - switched socket
RFSC-11, RFSC-61.
For installation in harsh
environments RFUS-61.
RFSAI61B RFSC61
RFSA-11B/61B
into switchboard
RFSA61B
1M
3M
RFSA-61M
RFSA-66M
IP65
RFUS61
RFSTI-11B
RFSTI-11/G
REMOTE RF CONTROLLER WITH DISPLAY
Combine remote control RF Pilot with RF
Touch touch screen unit for maximum use
of functions of the RF Control system.
3M
0/1-10 V
into socket
RFSC-11
RFSC-61
for harsh environments
IP65
IP65
RFUS-11
RFUS-61
Temperature
sensors with
switch and
manual control
RFDAC-71B
Analog receivers
0-10V - drive regulation
1-10V - dimming fluorescent
tubes
RFPM-1
Electricity meter
RF PILOT
ΣE
E
RFSA-62B
RFDA-73M/RGB
11
OVERVIEW OF iNELS RF CONTROL
TRANSMITTERS
Controllers
RF Touch-W
RF Touch-B
Wireless central RF Touch-W unit Wireless RF-Touch B control unit
for surface mounting. 100–230V for mounting in an installation box.
AC or a 12V DC adapter (external).
100–230V AC.
Converters
1M
RF Pilot
RF KEY
RFWB-20/G
RFWB-40/G
RFTC-10/G
A wireless remote RF
controller with a display
4-channel remote control
in the keychain design.
2-channel wireless
wall switch button in the
LOGUS90 design.
4-channel wireless wall
switch button in the
LOGUS90 design.
RF transmitter: Digital
temperature regulator. 2 x
1.5V AAA-type battery. In the
LOGUS90 design.
3M
NEW
NEW
RFIM-20B
RFIM-40B
RFSG -1M
RFTI - 10B
RFGSM-220
Elan-RF-003
Universal transmitter
module to be mounted
under a wall switch button
in an installation box.
Universal transmitter
module to be mounted in
an installation box.
RF transmitter: a universal
transmitter module. 230V AC.
RF transmitter: a wireless
temperature sensor.
1 x 3V CR 2477 battery.
RF trasnmitter: GThe GSM communicator can be
used for remote switching of heating, lights, barriers,
gates and for ascertaining the status of the RF Control
actuator (ON, OFF, temperature level) 2x switching
8A. 11-30V DC.
Converts commands from LAN
TCP/IP network to an RF signal
for controlling RF actuator.
USB Flash drives
RFAP/USB
RF iNELS/USB
Repeater
Electricity meter
ΣE
E
Detectors
NEW
12
RFAP/USB
RF iNELS/USB
RFRP-20
RFPM-1
Control key with SW
Virtual RF Touch.
Forms a communication
interface and gateway
between units.
Signal repeater in wireless
socket box.
Wireless electricity meter
1x switching 16A. 230 V AC.
JA-80P
Infra-passive movement
sensor JA-80P surveys
space and indicates any
movement of persons.
JA-81M
The product is used to detect
door or window opening, etc.
The detector is also designed
to detect manipulation with
an external shutters equipped
with a ratchet sensor of shutter
movement.
JA-82M
The product is designed to detect window (door) opening. An
“invisible” magnetic sensor is
mounted into plastic or wooden
window frames and is completely inconspicuous.
WIR EL ES S EL E M E N TS
RECEIVERS
Dimming actuators
Shutter actuators
NEW
NEW
RFJA-12B/230 V
RFJA-12B/24V DC
RFDSC-11(71)
RFDA-11B
RFDA-71B
RFDA-73M/RGB
Shutter ACTUATOR.
2x switching 8A, relay with
protection. 230V AC.
Shutter ACTUATOR, contactless
switching.
12-24V DC.
RFDSC-11: Single-dimming socket.
Function - Touch dimmer. 230 V AC.
RFDSC-71: Multi-dimming socket.
6 light function, ON / OFF.
230 V AC / 250 VA.
Single-function dimming actuator,
1 light scene,
OFF function. 230V AC.
Multifunction dimming
actuator. 7 functions.
230V AC / 250 VA.
Used to dim LEDs, an LED strip and RGB
LED strip with power supply 12-24V DC
control is performed with RF Control
wireless transmitters or signal 0-10V/
1-10V, or iNELS DAC converter iNELS
Switching actuators
IP 65
1M
3M
NEW
NEW
NEW
RFSC-11(61)
RFSA-11B (61B)
RFSA-62B
RFSAI-61B
Switched socket
1x switching 16A. 230 V AC.
RFSC-11: singlefunction.
SWITCH ON/SWITCH OFF.
RFSC-61: multifunction - 6 functions.
1-channel singlefunction
(multifunction) switching
actuator.
1x switching 16A, 6 functions.
(multifunction), 230V AC.
2-channel multifunction switching
actuator. 2x switching 8A,
6 functions. 6 functions.
230V AC.
Switching actuator with
external input
1x switching 16A. 230 V AC.
RFSA-61M
RFSA-66M
RFUS-11(61)
1-channel multifunction switching 6-channel multifunction switching
actuator, 1x switching 16A.
actuator, 3x switching 8A,
6 functions.
6 functions.
230V AC.
230V AC.
RF switching actuators with enhanced
IP 65 protection
1x switching 16A. 230 V AC.
Accessories for RFSA-61M, RFSA-66M internal and external antennas see p. 45
Temperature actuators
Analog actuator
NEW
0-10 V
ALPHA AA 0–10V
Thermo valve
for regulation of heating,
voltage 0-10V.
1-10 V
RFSTI-11B
RFSTI-11/G
RFATV-1
RFDAC - 71B
Wireless wall switch buttoning actuator
with a temperature sensor to be mounted in an installation box. 230V AC.
Wireless wall switch buttoning actuator
with a temperature sensor in a luxury
LOGUS90 design, providing manual
control by buttons on the front side of
device. 230V AC.
Used to measure the temperature in the
given zone and also for wireless control
of a radiator.
2x batteries AA 1.5V
RF receiver: an actuator with analog
output 0(1)–10V an 1x switching
16A contact. 7 functions. 230V AC.
DIML
A dimmable DIML ballast to control the brightness
of fluorescent T8 tubes (26 mm in diameter).
13
RF Touch control unit
AWARDED
!
!
!
!
!
!
RF Touch-B
for mounting in an installation box
RF Touch-W
unit for mounting on surfaces
!
EAN code
RF Touch-B: 8595188143738 (white frame, white intermediate frame)
RF Touch-W: 8595188131711 (white frame, white intermediate frame, white back cover)
Technical parameters
Display
Type:
Resolution:
Side proportion :
Visible surface:
Backlighting:
Touch area:
Diagonal:
Control:
Power supply
Supply voltage/rated current:
RF Touch-B
!
color TFT LCD
320 x 240 pixels / 262,144 colors
3:4
52.5 x 70 mm
active (white LED)
resistive 4-conductor
3.5”
touch
100 -230 V AC
Input power:
Power supply terminals:
Control
Range:
Frequency:
Connection
Connection:
Cross-section of connecting wires:
Operating conditions:
Operating temperature:
Storage temperature:
Protection:
Overvoltage category:
Contamination degree:
Operating position:
Installation:
Dimensions:
Weight:**
Related standards:
RF Touch-W
from the back 100–230VAC,
from the side 12DC*
max. 5W
A1 - A2
100 m
1m
868 MHz
terminal box
no-screw push-in terminal
box or jack 2.1 mm jack
connector
max. 2.5 mm2/1.5 mm2 with a hollow
0 to +50°C
- 20 to +70°C
IP 20
III.
2
any
in a mounting box
94 x 94 x 12 mm
127 g
anywhere indoor
94 x 94 x 24 mm
175 g
EN 60730-1
* Adapter is included in the RF Touch-W unit package
** Weight includes the plastic frame and the intermediate frame.
14
RF Control wireless system touch control unit allows intelligent control of RF units
it serves for:
- central control of all units from one place
- overall plan (visualisation) of the current status of units (appliances/devices)
two-way communication:
- sends commands to temperature, switching, dimming and roller blind/shutter actuators
- receives commands from transmitters, controllers and temperature sensors
- processes programs for heating and regulation
3.5” touch color display - no mechanical buttons
RF Touch can control up to 40 RF Control system actuators and can receive information
from up to 30 OASiS detectors.
design:
RF Touch-B: for mounting in an installation box with 230V AC power supply
RF Touch-W: for mounting on surfaces with power supply from the back: 100–230V or from the side
(via jack connector): 12V DC (adapter is included in the package)
RF Touch colorways:
RF Touch frames in basic plastic design (white, black, red) and LOGUS90 luxury design
(glass, metal - aluminium, nickel, titanium)
intermediate frames - white, dark grey, metallic finish - aluminium, pearl, ice, grey
RF Touch-W back cover - white, ivory, light grey, dark grey
RF Touch can be programmed together with actuators designated as OASiS & Touch Compatible
°C
Communication with RF Touch
TRANSMITTERS
RF TOUCH
Controllers
Converters
Repeater
RFAP/
USB
RFWB-20/G
(40/G)
RFTC-10/G
∑E
RFAP/
USB
1M
RF Pilot RF KEY
Electricity
Detectors
meter
3M
RFAP/USB RFIM-20B RFSG-1M
RF iNELS/USB
(40B)
RFGSM-220 ELAN-RF-003
RFRP-20
RFPM-1
JA-80P
JA-81M
JA-82M
RECEIVERS
Roller Shutter actuators
Dimming actuators
Temperature actuators
3M
RFJA-12B/230V
(24V DC)
RFDSC-11(71)
RFDA-11B (71B)
RFDEL-71B
RFSTI-11B
RFDA-73M/RGB
RFSTI-11/G
Switching actuators
Analog actuator
IP65
Livingroom
Heating
Save mode
Normal mode
Mon
Daily overview
Tue
Weekly overview
RFSC-11(61)
RFSA-11B(61B)
RFSA-62B
RFSAI-61
Thu
15:00
Fri
Holliday mode
On
O
Sat
OK
RFSA-66M
RFUS-11(61)
RFDAC-71B
Daily overview
Tue
Weekly overview
Thu
19:45
window shutter
control
RFJA-12B
Function execution feedback
RF Pilot
Heating (save mode)
Bedroom
09:00
RFSA-61M
RFSA-62B
Command to execute function
25.00 C
Sun
Fri
3M
09:00
Heating program
Wed
1M
Wed
Party mode
Mon
RFTI-10B
Transmitter communication
with actuators
Set temperature
heating
21 °C
RFTC-10/G
21.00 C
Sat
DETECTORS
Sun
Measures temperature in the space and
sends the data to RF Touch
OK
OK
RFSA-61B
Start
of light
Finish
of light
up to 200 m
Next function
The detector senses
movement and switches
on alarm
RA
NG
RFSC-61
E4
00
M
Serves to extend
the RF signal range
Settings
RFSA-61B
HEATING
• control of heating devices (boilers, thermo valve 0–10V...)
• temperature regulation in the entire house or in individual rooms
• information on outdoor temperature (wireless temperature sensor) - terraces ...
• possibility to set your own heating program for the whole week
• holiday mode will interrupt the heating program when you are away
• room temperature correction (during the heating program) is performed
with a digital thermal regulator command
DIMMING
• the regulation of light intensity (light bulbs, halogen lights with electrical
or coil transformer, fluorescent tubes with dimmable control gear 1–10V)
• customizable names of individual dimmed circuits (such as “lights living
room”)
• “sunrise/sunset” imitation - light gradually goes on or off during the preset
period between 2 seconds and 30 minutes
DETECTORS
• RF Touch communicates with detectors - window, door, movement...
• possible to combine with switching actuators
• perfect overview of the whole house
RFRP-20
up to 200 м
RFDA-71B
RFDSC-71
SWITCHING
• this function serves to switch on/off lights, sockets, electrical appliances
and devices
• intuitive control thanks to customized name options
• switch clock enables you to switch appliances in real time, even during
your absence (simulation of the presence of persons, etc.)
• switching actuator function selections: switch on/off, impulse relay,
button, delayed start/return (time of delay from 2 seconds to 60 minutes)
WINDOW SHUTTERS
• controlling window shutters, canopies, garage door, etc.
• window shutters are controlled separately or as a group
• setting an independent time schedule for pulling up/down
• the window shutter receivers are powered by either 230V or 24V DC
(shutters between windows, etc.)
QUICK CONTROL
• serves to control actuators as a group with a single touch
• possibility to set up scenes; on activation, for example, window
shutters are pulled down and lights are adjusted to required intensity
15
RF Pilot: remote RF controller with a display
Combine the RF Pilot remote controller with the RF Touch control
unit for maximum utilization of the RF Control system features.
!
!
!
!
!
!
!
!
!
!
!
EAN code
RF Pilot/W: 8595188143769 (white cover)
RF Pilot/A: 8595188145169 (anthracite cover)
Technical parameters
Display
Type:
Resolution:
Side ratio:
Visible surface:
Backlighting:
Diagonal:
Control:
Power supply
Power supply:
Battery life:
Control:
Range in free space:
Frequency:
Other data:
Operating temperature:
Storage temperature:
Protection:
Operating position:
Dimensions:
Weight:
Related standards:
Example of use
wireless Remote Controller RF Pilot with elegant design and OLED display
provides comfortable control and feedback about status of appliances and devices.
RF Pilot can be programmed for up to 40 RF Control actuators
RF Pilot measures and displays temperature in the surrounding area
preset menu with customizable names of controlled devices
the “Scene” mode enables you to control multiple receivers with a single touch
you can include the most frequently used devices in your “Favourite” menu and control them immediately after
the activation of the RF Pilot display
range up to 200 m
RF Pilot wireless control operates at the frequency of 868 MHz
battery power supply 2xAAA with life cycle up to 3 years
design: remote RF controller with RF Pilot/W display (white cover),
remote RF controller with RF Pilot/A display (anthracite cover)
RF Pilot
color OLED
128 x 128 pixels
1:1
26 x 26 mm
self-illuminating text
1.5“
direction button, control buttons
2 x 1.5V AAA batteries / R03
approx. 3 years, according to the frequency of use and battery type
up to 200 m
868 MHz
0 .. +55 °C
-20 ..+70 °C
IP20
any
130 x 41 x 18 mm
61 g
EN 60730-1
Display description
Color OLED display
Date
Quick control
options
Indicative current
temperature display
sun 01.01.12
Favourite 1
Favourite 2
Favourite 3
Favourite 4
Favourite 5
Favourite 6
Favourite 7
TEMP. : 23C
Time
12:54
Battery indication
Enter menu
MENU
Settings Menu
sun 01.01.12
Type:
RFSA-11
RFSA-6x
RFJA-12
RFDA-71
RFDA-11
RFDAC-71
EXIT
12:54
ASSIGN
Memory:
1/40
Type/address:
RFSA11/012345
Room:
Not allocated
Name:
Actuator 1
EXIT
ASSIGN
Memory:
1/40
Type/address:
Free position
Room:
Free position
Name:
Free position
EXIT
Device description
sun 01.01.12
12:54
Display
Rooms
Scenes
Favourite
EXIT
SELECT
Control
button
Direction
button
(joystick)
Control
button
16
Communication with RF Pilot
RECEIVERS
Roller Shutter actuators Dimming actuators
Switching actuators
3M
RFJA-12B/230V(24V DC)
RFDSC-11(71) RFDA-11B (71B) RFDEL-71B RFDA-73M/RGB
RFSA-11B (61B)
RFSA-62B
RFSAI-61
IP65
Command to execute function
Function execution feedback
sun 01.01.12
Lamp
Kitchen
Room
Bedrooms
Room
Children‘s Room
Living Room
TEMP. : 23C
12:54
sun 01.01.12
1M
3M
RFSA-61M
RFSA-66M
Analog actuator
RFUS-11(61)
RFDAC-71B
RANGE 400 m
12:54
RFDA-71B
Serves
to extend the RF
signal range
Rooms
Scenes
Favourite
RFRP-20
MENU
EXIT
SELECT
RFSA-11B
Socket 1
Socket 2
sun 01.01.12
Switch On
Button
Impuls
Delay On
Delay Off
Settings
BACK
12:54
sun 01.01.12
Switch On
Switch Off
Brightness: 0%
12:54
RFJA-12B
RFSA-66M
Socket 3
3M
Two-way
communication
PROCEED
BACK
Socket 4
6-channel switching
actuator
Socket 5
PROCEED
Open garage door
sun 01.01.12
Top
Down
Wind Up
Wind Down
Settings
BACK
12:54
PROCEED
sun 01.01.12
12:54
Switch On
Switch Off
Brightness: 0%
Gradual switch ON
Gradual switch
BACK
Socket 6
Group control of devices
with a single command
(“SCENE” mode)
RFDA-71B
RFJA-12B
RFSA-11B
RFDAC-71B
Dim lights to 20%
Pull down window
shutters
Ventilation off
Shut down heating
PROCEED
SCENES
• serves to control actuators as a group with a single touch
• possibility to set up scenes; on activation, for example, window
shutters are pulled down and the light will adjust to the required
brightness
SWITCHING
• this function serves to switch on/off lights, sockets, electrical
appliances and devices
• intuitive control thanks to customized name options
• switching actuator function selections: switch on/off, impulse relay,
button, delayed start/return (time of delay from 2 seconds to 60
minutes)
WINDOW SHUTTERS
• controlling window shutters, canopies, garage door, etc.
• window shutters are controlled separately or as a group
• the window shutter receivers are powered by either
230V or 24V DC (shutters between windows)
FAVOURITE
DIMMING
• the regulation of light intensity (light bulbs, halogen lights with electrical
or coil transformer, fluorescent tubes with dimmable ballast 1–10V)
• customizable names of individual dimmed circuits (such as “lights” or
“living room”)
• “sunrise/sunset” imitation - light gradually goes on or off during the preset
period between 2 seconds and 30 minutes
• serves to select the most frequently used devices
• on display activation the “Favourite” menu pops up automatically
to provide you with a quick access to controlling devices
17
Transmitters: Key RFAP/USB, key RF iNELS/USB
RFAP/USB
!
RFAP/USB
!
!
RFAP/USB - forms a communication interface between units of the RF Control system and a PC with the
Windows operating system or Linux with USB interface
The SW application Virtual RF Touch simulates the function of the RF Touch touch screen unit (see page 14).
The demo version is available for download at www.elkoep.com/download/
RT Touch and RFAP/USB can be used simultaneously
RF iNELS/USB
!
!
RF iNELS/USB
!
!
!
RF iNELS/USB - flash drive which forms a communication interface and gateway between units, elements
installed into the iMM server
any iMM Client can then control RF Control elements
RF iNELS/USB and RFAP/USB is compatible with the version RF Touch & Oasis compatible
two-way communication:
transmits commands to perform a function + receives information on performed command
EAN code
RFAP/USB: 8595188145572
RF iNELS/USB: 8595188146234
Internal antenna AN-I: 8595188161862
Technical parameters
EXTERNAL ANTENNA AN-E
RFAP/USB
RF iNELS/USB
max. 1W
USB 1.1 and higher, plug. „A“
100 m
1m
868 MHz
green LED
red LED
Power:
Interface:
Range:
Min. distance of RF Touch-actuator:
Frequency:
Power supply indication:
RF communication indication:
Operating conditions
Operating temperature:
Storage temperature:
Protection:
Contamination degree:
Work space:
Installation:
Dimensions:
Weight:
Related standards:
Example of use RFAP/USB
Connecting the RFAP/USB into a USB slot on your computer starts the application and installs Virtual
Touch, which simulates the wireless RF Touch touch screen unit. This makes it completely mobile, and
you have the option of controlling switching, dimming lights, controlling heating or air conditioning,
and blinds. Detectors bring you security monitoring, ex. open windows, door, or movement of persons.
0 up to +55°C
- 20 up to +70°C
IP30
2
any
any
22x85x15mm
20 g
CS EN 60950-1
RFSA-11B/61B
RFDAC-71B
RFJA-12B/230V
RFSTI-11/G
RFSC-61
LEGEND:
Command to perform function
Feedback on performing function
JA-80P
RFAP/USB
Examples of use of RF iNELS/USB
By connecting RF iNELS/USB into the iMM Server, you can control actuators of the RF Control system via your Videozone screen. You thus have command over switching, dimming lights,
controlling heating or blinds. Detectors also provide you with a clear view of your entire household. So you can incorporate any RF Control wireless element into the iNELS system.
RFDA-11B
RFJA-12B/230V
RFSTI-11/G
iMM
Client
RFDAC-71B
JA-80P
RFSC-61
RF iNELS/USB
VideoZone 1
iMM Server
iMM
Client
Ethernet
18
VideoZone 2
RF transmitter: RF KEY keychain
!
RF Key is a portable transmitter used to control RF Control units
!
it has a wide variety of use thanks to its small size; you can have it always on you, leave it in your car or wear it
as a keyholder
!
it is most often used to control garage doors and gates, to switch on lights in required areas, etc.
!
signal is transmitted via wireless communication between the system units
!
RF Key may simultaneously control an unlimited number of assigned actuators, which are within the range of
the RF signal
!
keep in mind that the radio signal range for RF installations depends on the building structure, materials used
and the manner of unit location in the area
EAN code
RF KEY/W-white: 8595188143332
RF KEY/B-black: 8595188143752
Technical parameters
RF KEY
Supply voltage:
Transmission indication:
Number of buttons:
Transmitter frequency:
Signal transmission method:
Range in free space:
Other data
Operating temperature:
Operating position:
Protection:
Contamination degree:
Dimensions:
Weight:
Related standards:
3V CR 2032 battery
red LED
4
868 MHz
unidirectionally addressed message
up to 200 m
!
wireless transmitters operates at the frequency of 868 MHz
!
based on an impulse (pressing a button), the transmitter can send a radio signal with information to the receiver
!
battery life is about 5 years, depending on the frequency of use
!
colors: white, black
Device description
Transmitter indication
Control buttons
Control buttons
-10 to +50 °C
any
IP 20
2
64 x 25 x 10 mm
16 g
EN 60669, EN 300 220, EN 301 489
Directives RTTE,Gov. Reg. No..426/2000Sb (Directives 1999/EC))
Element placement








For more information, see p. 48
19
RF transmitter: Wireless wall switch button RFWB-20/G, RFWB-40/G
60mm
13mm
!
wireless wall switch buttons serve as transmitters to control RF Control system receivers
!
the flat design makes it ideal for easy and quick installation on any surface (glass, wood, wall...)
!
the signal is transmitted via wireless communication between the system units
!
wireless wall switch buttons may simultaneously control an unlimited number of assigned actuators within
the range of the RF signal
!
keep in mind that the radio signal range for RF installations depends on the building structure, materials
used and the manner of unit location in the area
RFWB-40/G
EAN code
RFWB-20/G: 8595188140379 (device, white cover, white frame)
RFWB-40/G: 8595188140607 (device, white cover, white frame)
Technical parameters
RFWB-20/G
Supply voltage:
Transmission indication:
Number of buttons:
Transmitter frequency:
Signal transmission method:
Range in free space:
Other data:
Operating temperature:
Operating position:
Mounting:
Protection:
Contamination degree:
LOGUS90
Dimensions:
Frame - plastic
Frame - metal, glass, wood, granite
Weight*:
Related standards:
based on an impulse (pressing a button), these switches can send a radio signal with information to the receiver
!
the transmitters are battery-powered
!
battery life is about 5 years (depending on the frequency of use)
!
RFWB-20/G: 2-channel wireless wall switch button in LOGUS90 design
!
RFWB-40/G: 4-channel wireless wall switch button in LOGUS90 design
Device description
RFWB-40/G
3V CR 2032 battery
red LED
2
!
RFWB-20/G
4
Transmitter
indication
868 MHz
unidirectionally addressed message
up to 200 m
Control buttons
-10 to+50 °C
any
glue / screws
IP 20
2
RFWB-40/G
85 x 85 x 16 mm
94 x 94 x 16 mm
Transmitter indication
38g
39g
EN 60669, EN 300 220, EN 301 489
Directives RTTE,Gov. Reg. No..426/2000Sb (Directives 1999/EC))
Control buttons
*including standardly delivered plastic frame. No installation into multi-frames.
Element placement
Examples of element placement
On wall







For more information, see p. 48
20

On wood
On glass
RF transmitter: Temperature regulator RFTC-10/G
!
!
!
!
Flat design - the depth of the device is only 20 mm!
!
EAN code
RFTC-10/G:
RFTC-10/G white:
RFTC-10/G ivory:
RFTC-10/G ice:
RFTC-10/G pearl:
RFTC-10/G aluminium:
RFTC-10/G grey:
8595188142861 (device, white cover, white frame)
8595188145329 (device, cover)
8595188145336 (device, cover)
8595188145343 (device, cover)
8595188145350 (device, cover)
8595188145367 (device, cover)
8595188145374 (device, cover)
Technical parameters
Supply voltage:
Battery life:
Temperature offset:
Offset:
Display:
Backlighting:
Transmission indication / function:
Temperature measurement input:
Temp. measurement range and accuracy:
Transmitter frequency:
Signal transmission method:
Range in free space:
Minimum control distance:
Other data:
Operating temperature:
Operating position:
Mounting:
Protection:
Contamination degree:
Dimensions:
Frame - plastic
Frame - metal, glass, wood, granite
Weight:
Related standards:
!
RFTC-10/G
temperature regulator can be used in two ways:
- with the RF Touch unit it is used for temporary temperature control (± 5 °C) during the set program
in RF Touch unit
- with RFSA-6x multifunction switching actuators, it serves to set temperature and subsequently switch on the
connected device
the temperature is measured by an internal sensor
the temperature is controlled by buttons / and it is shown on the backlighted LCD display:
- measured temperature
- switching on the heating circuit (heating/not heating - only when paired with RFSA-6x actuators)
- additional (signal strength, battery status)
controller is powered by battery - 2 x AAA1.5 V
the flat rear side of the device (see picture) provides an easy installation on any place where you want
to measure temperature
the luxury design of LOGUS90 frames (glass, wood, stone, metal) enables placement in multiple frames
Communication with the RF Touch central unit
2 x 1.5V AAA battery
1 year
2 buttons
/^
± 5 °C
LCD, characters / see Display description
YES / active – blue
symbols
1x internal sensor
0 to +55 °C; 0.3 °C of the range
868 MHz
bidirectionally addressed message
up to 100 m
20 mm
LEGEND: Supplying by battery allows to place RFTC-10/G regulator anywhere indoors.
Room A
RFTC-10/G
Internal sensor measures room temperature. In the
event of temperature correction, RFTC-10/G will send
the information to RF Touch, which will switch on the
heating device.
B
Room B
RFTC-10/G
Internal sensor measures room temperature and
will directly switch on the heating device when
the room temperature changes.
A
0 to +55 °C
wall-mounted
glue / screws
IP20
2
85 x 85 x 20 mm
94 x 94 x 20 mm
66 g (without batteries)
EN 60669, EN 300 220, EN 301 489
RTTE Directive, Gov. Reg. No. 426/2000 Sb. (Directive 1999/EC))
Display description
Signal strength
Circuit temperature measured
Battery status indication
Locked for adjustment
Circuit temperature set
Circuit status indicator
Temperature/time indication
Temperature
measured in °C/°F
21
RF transmitter: Universal transmitter module RFIM-20B, RFIM-40B
!
!
!
m
60mm
13mm
!
!
!
!
!
RFIM-20B
RFIM-40B
!
!
EAN code
RFIM-20B: 8595188139274
RFIM-40B: 8595188137188
!
Technical parameters
Supply voltage
Battery life:
Transmission indication / function:
Number of inputs:
Transmitter frequency:
Signal transmission method:
Range in free space:
Other data:
Operating temperature:
Operating position:
Terminals (CY wire, cross-section):
Length of terminals:
RFIM-20B
RFIM-40B
1 x 3V baterie CR 2477
2 x 3V baterie CR 2032
universal transmitters are designed for mounting under your existing switch, easily transforming it into a wireless one!
RFIM-20B: 2 inputs, intended for switching with button or impulse, and also for permanent contact = switch
RFIM-40B: 4 inputs, intended for switching with button or impulse
possibility of connection into application where it is necessary to transmit information about status of sensor, detector,
button or logical output
the signal is transmitted via wireless communication between the system units
does not need an external power supply (battery-powered)
transmitters may simultaneously control an unlimited number of assigned actuators, which are within the
range of the RF signal
dimensions allow mounting in an installation box (e.g. KU-68), directly under a wall switch button, without
any other external power supply
can be assigned to RF Control receivers
keep in mind that the radio signal range for RF installations depends on the building structure, materials used
and the manner of unit location in the area
battery life up to 5 years
Device description
Wiring
RFIM-20B
5 years
orange LED
2
RFIM-20B
red LED
4
868 MHz
unidirectionally addressed message
up to 200 m
Switch
Transmitter
indication
IN2
IN1
IN22 IN11
-10 to +50 °C
any
4 x 0.75 mm2
6 x 0.75 mm2
90 mm
Control inputs
Resist.of connection between terminals
- for switched on button:
- for disconnected contact:
Mounting:
Protection:
Contamination degree:
Dimensions:
Weight:
Open contact voltage:
Length of cable to contact:
Related standards:
< 300 Ω
> 10 kΩ
free at lead-in wires
IP30
2
49 x 49 x 13 mm
45 g
50 g
pulse 12 V
3V
max. 100 m of parallel lines
max. 5 m
EN 60669, EN 300 220, EN 301 489
RTTE Directives, Gov. Reg. No.426/2000 Sb. (Directive 1999/EC))
RFIM-40B
RFIM-40B
Buttons
Transmitter
indication
IN4
IN3
IN2
IN1
Control inputs
GND
Example of use
N
RFIM-40B
For more information, see p. 48
22
N
L
GND
GND
RF transmitter: Universal transmitter module RFSG-1M
module transmitter serves for wireless transmission of a command from a device / technology
! with regard to 230V power supply, it is particularly intended for frequent signal transmission
! it is suitable for:
- switching HDO (low/ high tariff )
- wireless transmission of appliance and electrical device switching
when
connected
to input terminals S - S, it periodically transmits the “switch on” signal at 10-minute intervals
!
! when disconnected, it transmits the “switch off ” signal
! transmission indication with a LED on the front panel
! possibility to assign to the RF Control system (particularly suitable for switching receivers)
! transmitters may simultaneously control an unlimited number of assigned actuators, which are within
the range of the RF signal
! galvanically isolated power supply
! in the 1-MODULE design with an internal antenna or external antenna, mounted to a DIN rail
! intended for mounting into switchboard
! an internal antenna is included in the standard package, external antenna is available on request only
!
1M
EAN code
RFSG-1M: 8595188142847
External antenna AN-E: 859415759012
EXTERNAL ANTENNA ANE
Supply voltage:
Apparent input:
Dissipated power:
Supply voltage tolerance:
Power supply indication:
Input
Control voltage:
Control input power:
Control terminals:
The length of control impulse:
Transmission indication / function:
Transmitter frequency:
Signal transmission method:
Range in free space:
Minimum control distance:
Other data:
Operating temperature:
Operating position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Device description
RFSG-1M
Technical parameters
110 - 230 V AC / 50 - 60 Hz
2 VA
0.2 W
+10 % / -25 %
green LED
Power supply terminals
A1
Power supply indication
A2
Transmitter indication
RFSG-1M
Un STATUS
AC 12-230V / DC 12-230V
AC 0.025VA / DC 0.1W
S-S
min. 25ms ( max. unlimited)
red LED
868 MHz
unidirectionally addressed message
up to 160 m
20 mm
Antenna connector
ANT.
Test button
TEST
-15 to + 50 °C
any *
DIN rail support EN 60715
IP20 from the front panel
III.
2
max. 1x2.5, max. 2x1.5 / with a hollow max. 1x2.5
Connecting conductor cross-section: (mm2):
90 x 17.5 x 64 mm
Dimensions:
62 g
Weight:
EN 60669, EN 300 220, EN 301 489
Related standards:
RTTE Directives, Gov. Reg. No.426/2000 Sb. (Directive 1999/EC)
S
S
Control input
* For more information, see p. 48
Wiring
Example of use
L
N
Un
A
A
RFSG-1M
A1
A1
A2
Un STATUS
A2
ANT.
TEST
S
S
S
S
HDO
signal
Cc
N
L
controlling by voltage
AC/DC 12-230V
23
RF transmitter: Wireless temperature sensor RFTI-10B
!
serves as a temperature sensor that sends data at regular intervals to RF Touch, which can send a signal for
switching on the heating device located in other areas
60mm
13mm
!
contains an internal sensor for measuring ambient temperature and a terminal for the connection of an
external sensor measuring temperature of outdoor areas, floors, etc.
CONTROLS
!
possible use of both sensors simultaneously
!
does not require an external power supply (battery-powered) for its operation, so it is also suitable for safe
water temperature measurement (e.g. in swimming pools)
!
LED indicator of RF signal transmission
!
dimensions allow mounting in an installation box (e.g. KU-68) without any other external power supply
!
possible assignment of the transmitter to the RF Touch control unit
EAN code
RFTI-10B: 8595188131759
Technical parameters
Device description
RFTI-10B
1 x 3V CR 2477 battery
1 year
red LED
1x internal NTC thermistor
1x external TZ/TC temperature sensor input (see Accessories)
-20 to +50°C ; 0.5 °C in the range
Temp. measurement range and accuracy:
868 MHz
Transmitter frequency:
unidirectionally addressed message
Signal transmission method:
up to 160 m
Range in free space:
Other data:
-10 to +50 °C
Operating temperature:
any
Operating position:
glued / free-standing
Mounting:
IP30
Protection:
2
Contamination degree:
49 x 49 x 13 mm
Dimensions:
45 g
Weight:
EN 60669, EN 300 220, EN 301 489
Related standards:
RTTE Directives, Gov. Reg. No.426/2000 Sb. (Directive 1999/EC)
Supply voltage:
Battery life:
Transmission indication / function:
Temperature measurement
Device status indicator
Terminal for the connection of
external sensor TC/TZ
Internal sensor
B
Communication with RF Touch unit
A-61B
RFS
LEGEND:
RFTI-10B measures temperature (balcony, terrace, cellar, ...) and sends the data to RF Touch at
regular intervals. Using RF Touch it can be programmed to work with a switching actuator which
then switches heating on/off.
A-61B
RFS
A
C
RFTI-10B
A RFTI-10B measures temperature with internal sensor
B RFTI-10B measures temperature with external sensor
C = A + B RFTI-10B measures temperature with both internal and external sensors
Recommended external sensors:
see p. 45
Sensor location:
on a wall
24
External temperature sensor
in a box
in a panel
in a pipe
in a tank
RF transmitter: Converter Ethernet to RF signal Elan-RF-003
!
!
!
!
!
EAN code
Connection
Elan-RF-003
Front panel ELAN-RF-003
Oasis & RF Touch Compatible
868 MHz
two-way addressed message
RSMA connector
1 dB (part of supply)
PROG button
1 x green PROG LED
1 x red RF com. LED
up to 100m
Red LED
RF STATUS
OASIS & Touch
Compatible
868MHz
RF AN
ANT.
T.
PROG button
Connector antenna
PROG
PROG
Yellow LED
PROG
Yellow USB status LED
LED indication Ethernet
communication
Back panel ELAN-RF-003
Supply
connector
10-27V/ 200mA
green LED
yellow LED
10/100 Mbps (RJ45)
192.168.1.1
Function selection
RESET
USB B
connector
10-27 V DC / 200 mA
adapter with connector Jack Ø 2.1 mm (part of supply) or connector USB-B
green LED POWER
yellow USB status LED
reset defaults
230 VAC / 12 V DC part of supply of device
-20 .. +55 °C
-25 .. +70 °C
IP 20
2
any
free
installation box
90 x 52 x 65 mm
136 g
USB
POWER
ETHERNET
RESET button
Green POWER LED
indication power supply
Example of use
ELAN-RF
RFSA-61B
ELAN-RF
RRouter
image 1
IT
ZVOL
ízen
í
Scé
Akto ny
Míst ry
Wifi
nost
i
Oblí
Jazy bené
Kore k
kce
Interface RF Control
Communication protocol:
Broadcasting frequency
Signal transfer method:
Output for antenna:
Antenna:
Activation of teaching mode:
Teaching mode indicator:
RF communication indicator:
Range in open space:
Ethernet interface
ETH operating status indicator:
ETH communication indicator:
Communications interface:
Preset IP address:
Power
Supply voltage/current:
Power:
Supply voltage indication:
Other
Indication:
RESET button:
Power source:
Operating temperature:
Storage temperature:
Protection:
Contamination degree:
Working position:
Installation:
Design:
Dimensions:
Weight:
!
ODEJ
Technical parameters
EXTERNAL ANTENNA AN-E
ÍT
Elan-RF-003: 8595188146845
External antenna AN-E: 859415759012
Internal antenna AN-I: 8595188161862
converter Elan-RF-003 converts commands from LAN TCP/IP network to an RF signal for controlling RF
actuator, enables two-way communication between the RF and Ethernet systems
can be used to extend the range of the RF signal along the UTP cable (Ethernet network) or WiFi (between
individual floors in your house)
option of controlling and reading variables from the RF actuator (temperature, status ON/OFF)
controlling the RF actuator can be performed in three ways:
a) via the iMM Server (image 3)
b) via the application Virtual Touch for PC (image 3)
c) via the RF Control transmitters (RF Pilot, RFWB, RF KEY) (image 1 and image 2)
programming the ELAN-RF-003 is performed:
1) via iMM server
2) via SW virtual touch for PC
3) by pressing the PROG button on the front panel of the device
4) via web interface
package includes: internal antenna AN-I
optional accessory: external antenna AN-E
More information on p. 45
Router
ELAN-RF
image 2
ELAN-RF
ELAN-RF
PC
(server)
switch
image 3
ELAN-RF
image 4
25
RF transmitter: multifunction GSM communicator RFGSM-220M
!
!
3M
CONTROL ELEMENTS
!
!
!
EAN code
RFGSM-220M:8595188146043
External antenna AN-E: 859415759012
Internal antenna AN-I: 8595188161862
!
Technical parameters
Power
Supply voltage:
Current consumption:
Consumption during communication:
Working band of GSM module:
Transmitter output power:
Inputs IN1, IN2, IN3, IN4
Control voltage:
Control input power:
Length of control impulse:
Inputs RF:
Outputs
Number of contacts:
Rated current:
Switching power:
Min. switching power DC:
Mechanical service life (AC1):
Electrical service life:
RF ouputs:
Further data
Operating system PC:
Range of RF module:
Operating temperature:
Operating position:
Mounting:
Protection:
Contamination degree:
Cross-section of connecting wires (mm2)
Dimensions:
Weight:
Related standards:
RFGSM-220M
The GSM communicator can be used for remote switching of heating, lights, barriers, gates and for ascertaining
the status of the RF Control actuator (ON, OFF, temperature level)
GSM communicator can be used in three ways:
a) independently – reacts to SMS or ringing phone once, where it switches an internal relay or reacts to 1 of 4 inputs
b) with RF Control actuators – the switch command is sent to a switching actuator within range, which then
switches (ex. heating)
c) with the RF Touch unit – where it is possible to request information by mobile phone on the actuator status,
and switch the actuator based on this
setting is performed using software supplied with GSM communicator via a mini USB connector, OSMS Windows XP
and newer. RFGSM software is available for download at the manufacturer website: www.elkoep.com/download/
GSM contains:
- 4x potential-free, separated inputs for connecting other devices (ex. smoke detectors, blind actuators, heat
sensors, etc. )
- 2x output relays Switch 8A (ex. contactor, lighting, command for heating circuit, etc.)
- 2x antenna (-for GSM, - for RF communication)
- LI-ION batteries for backing up GSM communicator function for up to 30 min.
package includes: - 2x internal antenna AN-I
- mini USB connector - power cord used for SW installation in the GSM communicator
- SW connector 1
- power supply adapter 12V 6W
optional accessories: external antenna AN-E. More information on p. 45
Description of the device
Output contacts relay 1
11-30V DC; backup power supply LI-ION batteries
90 mA AC1 /12 V DC
max. 500mA AC1 / 12 V DC
850/900/1800/1900 MHz
2W pro GSM 900, 1W for GSM 1800
AC 12-230V or DC 12-230V (separated optocoupler)
AC 0.025 VA/ DC 0.1W
min. 25ms/ max. unlimited
one-way/two-way addressed message 868 MHz
2x Switches (AgSnO2)
8 A / AC1
2500VA, 240 W
500 mW
1x107
1x105
two-way addressed message 868 MHz
MS Windows XP a higher
up to 150 m
- 15 up to + 50°C
any
DIN rail EN 60715
IP 20 from front panel
2
max. 1x2.5; max.2x1.5/ with a hollow max 1x2.5
90 x 52 x 65
198 g
EN 60730-1
SW Connect1 for configuration of GSM gate
Available for download at www.elkoep.com/download/
Output contacts relay 2
Supply voltage 11-30V DC /500 mA (Terminals)
(Connector)
GSM antenna
+
-
RF antenna
Slot for SIM card
LED indication
Supply voltage indication
Mini USB connector
USB connection
USB initialization
RF
GSM
Battery indication
Input 4
Input 3
Input 2
Input 1
Receiving signals from RF sensors
Control of appliances
L
230V AC N
Smoke detector
Control via SMS
or ringing through once
Power supply +
10-30V AC -
PIR detector
+
-
18 16 15 28 26 25
Power supply
possible via
network
adapter
Door detector
Sending SMS or
ringing through
once
RFTI-10B
Controlling RF actuators
IN1 IN1 IN2 IN2 IN3 IN3 IN4 IN4
Setup via PC/Notebook
Supply voltage detection
230V AC
L
N
+
-
Detection of switching on/off of appliance
26
12V DC
Connection of wire detectors/sensors
RF transmitter: multifunction GSM communicator RFGSM-220M
A
Thanks to the GSM communicator, you
immediately know what the temperature
is at home right now. Just send an SMS or
ring the communicator once, the RF signal
transfers this command to RF Touch and from
RF Touch, an SMS reply is sent back to your
phone with the current temperature. You can
then switch the heating on or off.
RFTI-10B
SM
LEGEND
Sq
ue
SM
sti
Sr
ep
ly
Command to perform function
Feedback on performing
function
GSM
on
B
By sending an SMS or ringing once, you
activate the GSM communicator, which
sends an RF command to the temperature
actuator, which then switches the heating
(cable connection applied between the
actuator and heater).
RFSA-11B/61B
SM
S
LEGEND
Command to perform function
Feedback on performing
function
GSM
C
Smoke detector
GSM communicator enables you to directly
switch on up to 4 appliances. Its usefulness
thus expands from simply switching into the
area of detectors.
Flood detector
One of 4 inputs receives information from
the detector and sends it by SMS to the given
telephone number.
Door detector
HDO
signal
SM
S
Command to perform function
Feedback on performing function
GSM
Cable
27
RF transmitter: Repeater RFRP-20
!
the radio frequency signal repeater extends the range between the transmitter and the receiver by 200 meters
!
serves to transmit signal between up to 20 units
!
easy installation - plug into a socket, the function of the pass-through socket remains unchanged
!
supply voltage 110–250V AC
!
indication:
green LED: supplying voltage
red LED: active status (receiving and transmitting RF signal)
!
programming by button
!
frequency 868 MHz
!
produced in three versions:
CONTROLS
ELEMENTS
EAN code
RFRP-20/F: 8595188145107 (French)
RFRP-20 /S: 8595488145470 (Schuko)
RFRP-20/B: 8595188145480 (British)
French
CZ, SK, PL, FR
Technical parameters
RFRP -20
Supply voltage:
Apparent input:
Dissipated power:
Transmitter frequency:
Range in free space:
Minimum control distance:
Programming
230 - 250V / 50-60Hz
6 VA
0.7W
868 MHz
up to 200 m
20 mm
button
green LED / red LED
Other data:
Operating temperature:
Storage temperature:
Mounting:
Protection:
Dimensions:
Weight:
Related standards:
Schuko
HU, DE, RU, AT, RO
British
GB
Control up to 20 actuators
up t
o 20
0m
RF Touch
up to 200 m
up to 200 m
-20 to +55 °C
-30 to +70°C
plug into a socket
IP20 Device
60 x 120 x 80 mm
225 g
EN 607 30-1 ED.2
RF Pilot
up to 200 m
RF KEY
u p to
200
m
RFWB-20/G
RFWB-40/G
... up to 20 actuators
RANGE up to 400 m
Example of use
up to 400 m
up to 200 m
200 m
+
N
L
RFSA-61B
RFRP-20
RFWB-40
28
RF transmitter: electricity meter RFPM-1
!
ΣE
E
!
!
!
!
!
the devices sends information to RF Touch on power consumption, serving in essence as a
combination of remote controlled socket and electricity meter
RFPM-1 measures the following data:
- voltage
- current
- power
- network frequency
- consumed power
variables are displayed with the RF Touch
controlling the socket from RF TOUCH or the button on the panel
measured consumed energy in RFPM-1 can be RF Touch converted to money
produced in three designs of sockets and plugs:
CONTROL
ELEMENTS
EAN code
French
CZ, SK, PL, FR
RFPM-1/F: 8595488146279 (French)
RFPM-1/S: 8595488446287 (Schuko)
RFPM-1/B: 859518814518 (British)
!
Technical parameters
FRENCH, SCHUKO
Supply voltage:
Supply voltage tolerance:
Power (closed relay):
Output
Number of contacts:
Max. current:
Switching power:
Mechanical service life:
Electrical service life:
Controlling
RF command from the transmitter:
Manually:
RF range
Status indication
Supply voltage OK:
Relay closed:
Design:
Box with socket and plug:
AC 230 V AC / 50 Hz
BRITISH
GB
energy consumption history (day, week, month) can be displayed with the RF Touch
Description of the device
AC 240 V/ 50 Hz
+15/ -20 %
2,2 VA / 1.1 W
1 switching (AgNi)
16A / AC1
4000 VA (AC1)
3 x 107
0,7x105
Green LED
Red LED
Control button
868 MHz
button on panel
up to 150 m
Switched socket
green LED
red LED
Examples of use
design FRENCH, SCHUKO
design BRITISH
Next function
Further data
Protection:
Overvoltage category:
Contamination degree:
Operating temperature:
Storage temperature:
Dimensions:
Weight:
Related standards:
Schuko
HU, DE, RU, AT, RO
IP 30
II.
2
- 15 ... + 40° C
- 30 ... + 70° C
60x120x60mm
195 g
EN 60669, EN 300 220, EN 301 489
directives RTTE, NVč.426/2000Sb (directives 1999/ES)
Mon
Tue
Wed
Start
Thu
of light
Fri
Sat
Sun
3.78 kWh
2.52 kWh
1.50 kWh
1.50 kWhofFinish
light
5.80 kWh
4.00 kWh
3.60 kWh
Next function
Mon
Tue
Wed
Start
Thu
of light
Fri
Sat
Sun
Finish
of light
Description of function
! After inserting the device into the socket 230V/50Hz ( FRENCH, SCHUKO ) or
240V/50Hz ( BRITISH ) the green LED is lit - power supply is OK. After switching on the
power supply, the relay is always open.
29
RF receiver: Shutter actuator RFJA-12B/230V, RFJA-12B/24VDC
RF shutter ACTUATOR is used for controlling shutter engines, window shutters, garage gates, etc.
RFJA-12B/230V: switches 230V AC electric engines, which are controlled in two directions and have built-in
protector terminal switch.
- the time function of the relay “remembers” the time of closing and opening the blinds
! RFJA-12B/24 V DC: controls particularly shutters and blinds installed inside the window (12-24V DC electric
engines), with built- in terminal switch, where direction of the motion is controlled by
switching polarity
- the time function of the relay “remembers” the time of closing and opening the blinds
- contactless and noise-free switching
! each actuator can be controlled by up to 32 channels (1 channel is represented by 1 button on the wireless wall
switch button, keychain or the RF Touch-W / RF Touch-B unit).
! LED indicator of the device status on the front panel
! for programming and manual control, press the Prog button
! for mounting in an installation box (such as KU-68) or to be installed into non-conducting covers of unit engines
! possibility to assign receivers to the RF Control system
!
!
60mm
21mm
60mm
13mm
RFJA-12B/230V
RFJA-12B/24VDC
CONTROL
ELEMENTS
Wiring
EAN code
RFJA-12B/230V: 8595188137010 / RFJA-12B/24V DC: 8595188140614
Technical parameters
RFJA-12B/230V
RFJA-12B/230V
RFJA-12B/24VDC
L
N
+
12-24 V DC
RFJA-12B/24VDC
230 V AC / 50 - 60 Hz
12-24 V DC
Supply voltage:
7 VA / cos φ = 0.1
x
Apparent input:
0.7 W
x
Dissipated power:
x
0.5
W
Power without load:
x
25 W
Power under load:
Supply voltage tolerance:
+10 -15 %
Output
2 x switching (AgSnO2)
x
Number of contacts:
8 A / AC1
x
Rated current:
x
1
A
Permanent current:
2000 VA / AC1
x
Switching power:
10 A / <3 s
1.5 A
Peak current:
250 V AC1
x
Switching voltage:
x
12-24 V DC*
Switching output voltage*:
1x107
x
Mechanical service life:
5
1x10
x
Electrical service life (AC1):
Control:
RF, by command from transmitter:
868 MHz
Manual control:
PROG (STOP, , STOP, )
Range in free space:
up to 100 m
Other data:
Operating temperature:
-15 to + 50 °C
Operating position:
any **
Mounting:
free at lead-in wires
Protection:
IP 30
Overvoltage category:
III.
Contamination degree:
2
Terminals:
CY wire, cross section 4x0.75 mm2
Length of terminals:
90 mm
Dimensions:
49 x 49 x 21 mm
49 x 49 x 13 mm
Weight:
46 g
22 g
Related standards:
EN 60669, EN 300 220, EN 301 489 RTTE Directives, Gov. Reg.
No.426/2000 Sb. (Directive 1999/EC)


M
M
- +
Device description
RFJA-12B/230V
Device status
indicator – LED
Program button
(manual control)
Neutral conductor
Output relay contacts
Phase conductor
Example of use
RFJ
A-1
2B
RFJA-12B
* Identical with supply voltage
** For more information, see p. 48
RFJ
Function description
su
n
12
1.
.0
01 :54 p
12 m n
La tche
Ki
1. When the control button is pressed for less than 2 seconds, shutters move up (  ) or down (  ).
2. When the control button is pressed for more than 2 seconds, shutters move up (  ) or down (  )
until reaching the final position.
30
A-1
2B
RF receiver: Universal dimming socket RFDSC-11, RFDSC-71
!
!
the dimming socket offers a simple solution to dimming lamps and lights plugged into the socket,
this socket is simply positioned between the existing outlet and the light
it enables dimming of the following light sources:
type of source
symbol
description
R
ordinary light bulb, halogen lamp
resistive
L
coiled transformer for low-voltage halogen lamps
inductive
C
electronic transformer for low-voltage halogen lamps
capacitive
!
!
!
!
!
EAN code
RFDSC-11/F: 8595188145923 (French)
RFDSC-11/S: 8595488145930 (Schuko)
RFDSC-11/B: 8595188145459 (British)
Technical parameters
RFDSC-71/F: 8595188145947 (French)
RFDSC-71/S: 8595488145954 (Schuko)
RFDSC-71/B: 8595188145466 (British)
RFDSC-11
Supply voltage:
Apparent power:
Dissipated power:
Supply voltage tolerance:
Dimming load:
Output
Contactless:
Load capacity:
Control
RF command from the transmitter:
Range in open space:
Manual control:
Further data
Operating temperature:
Storage temperature:
Working position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Dimensions:
Weight:
Related standards:
!
!
!
!
LED
LED lamps and LED light sources, 230 V
ESL
dimmable energy-saving fluorescent tubes
the type of light source is set by the switch on the front of the of the device
max. output load is 300 W
electronic overcurrent and thermal protection - switches off the output in case of overload,
short circuit or overheating
setting the minimum brightness by the potentiometer on the front of the device eliminates
flashing of various types of light sources
the actuator can be controlled by up to 32 channels
RFDSC-11: single-function, button dimmer
RFDSC-71: 6 light functions, ON/OFF function (identical with the functions of RFDA-71B) see p. 32
programming and manual switching of the output is performed using the Prog button
produced in three designs of sockets and plugs:
RFDSC-71
230 V AC / 50 Hz
1.1 VA
0.8 W
+10/ -15 %
R,L,C, LED, ESL
2 x MOSFET
300 W*
868 MHz
up to 160 m (more on range on page 44)
button PROG (ON/OFF)
-20 up to + 35 °C
-30 up to +70°C
any*
in a network socket 230 V AC
IP 30
III.
2
60 x 120 x 80 mm
129 g
EN 60669, EN 300 220, EN 301 489
directives RTTE, NVč.426/2000Sb (directives 1999/ES)
* capacity for power factor cos φ=1
The power factor of dimmable LEDs and ESL bulbs ranges from cos φ = 0.95 up to 0.4.
An approximate value of maximum load may be obtained by multiplying the load capacity
of the dimmer by the power factor of the connected light source.
French
CZ, SK, PL, FR
Schuko
HU, DE, RU, AT, RO
British
GB
Description of the device
Light source selection switch
Potentiometer for setting
minimum brightness
Device status
indication
Supply voltage indication
Button Prog
Socket for connecting
a light source
Example of use
0-100%
Description of function
Controlling the dimmer:
! a short press of the button (< 0.5s) switches light on or off
! a long press (> 0.5s) enables fluid regulation of light intensity
! for the ESL load, when the lamp is switched off, a short press increases the brightness to the
maximum level (when the energy saver „lights up“) and then drops to the preset level
0-100%
Setting the minimum brightness:
! performed using the potentiometer on the front side
! used mainly when dimming energy-saving fluorescent tubes and LED bulbs due to their
differing illumination characteristics
! it prevents unwanted flashing when setting the actuator to the min. brightness
31
RF receiver: Dimming actuator RFDA-11B, RFSA-71B
60mm
21mm
!
serves for light dimming and creating light scenes (4 preset light scenes)
!
allows dimming bulbs and halogen lights with electronic or wound R, L, C 250VA transformer
!
RFDA-11B: single-function - button dimmer
!
RFDA-71B: multifunction - 6 light functions, ON/OFF function, possibility to set continuous switching on/off of
light (between 2 seconds and 30 minutes)
!
easy control: switch on/off the light by pressing the button shortly; adjust brightness by pressing and holding
!
each actuator can be controlled by up to 32 channels (1 channel is represented by 1 button on the wireless wall
switch button, keychain or the RF Touch-W / B unit)
RFDA-11B
RFDA-71B
CONTROLS
!
electronic overcurrent protection - the output is switched off in case of overloading or short-circuit
for programming and manual control, press the Prog button
!
installation box design (such as KU-68)
EAN code
RFDA-11B: 8595188136846 / RFDA-71B: 8595188143080
Technical parameters
Supply voltage:
Apparent input:
Dissipated power:
Supply voltage tolerance:
Connection:
Output
Resistance load:
Capacity load:
Inductive load:
Control:
RF, by command from transmitter:
Manual control:
Range in free space:
Other data:
Operating temperature:
Operating position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Terminals (CY wire, cross-section):
Length of terminals:
Dimensions:
Weight:
Related standards:
RFDA-11B
RFDA-71B
230 V AC / 50 Hz
8.3 VA / cos φ = 0.1
0.83 W
+10/ -15 %
3 conductors, including neutral
250 VA*
250 VA*
250 VA*
868 MHz
PROG (ON/OFF)
up to 160 m
Function 1 - press 1x
<0.5s >0.5s
<0.5s
Function 2 - press 2x
>0.5s<0.5s <0.5s >0.5s
b
>3s
t=3s
a
<0.5s
>0.5s
t=3s
<0.5s
<0.5s
<0.5s
>0.5s
>0.5s<0.5s <0.5s >0.5s
t=3s
a
b
c
a) Press the button for less than 0.5 second to switch on the light,.
By pressing the button shortly again, the light will continuously
switch off for 3 seconds (at 100% brightness).
b) Press and hold the button for more than 0.5 second to adjust
brightness continuously. After releasing the button, the brightness
level is saved into memory and pressing the button shortly later
will switch on/off the light to this intensity.
c) Brightness may be adjusted at any time by pressing and holding
the button. The receiver remembers the adjusted value even after
disconnecting from power supply.
Sunset - press 6x
ON/OFF - press 7x
<0.5s <0.5s <0.5s <0.5s >0.5s >0.5s <0.5s
<0.5s
t=2s..30min
<0.5s
t=3s
t=3s
c
<0.5s
* For more information, see p. 48
c
a) Press the button for less than 3 seconds to switch on the light; press
again to switch it off.
b) To avoid undesirable brightness adjustment, the continuous
brightness regulation is only activated pressing and holding the
button for more than 3 seconds. After releasing the button, the
brightness level is saved in the memory and pressing the button
shortly later will switch on/off the light to this intensity.
c) Brightness may be adjusted by pressing and holding the button
for more than 3 seconds at any time. The receiver remembers the
adjusted value even after disconnecting from power supply.
a) Press the button for less than 0.5 seconds to continuously switch on
the light for 3 seconds (at 100% brightness). By pressing the button
shortly again, the light will continuously switch off for 3 seconds.
b) Press and hold the button for more than 0.5 seconds to adjust
brightness continuously. After releasing the button, the brightness
level is saved in the memory and pressing the button shortly later
will switch on/off the light to this intensity.
c) Brightness may be adjusted at any time by pressing and holding
the button. The receiver remembers the adjusted value even after
disconnecting from power supply.
Sunrise - press 5x
b
Function 4 - press 4x
>0.5s<0.5s <0.5s >0.5s
b
<3s
3s
a
c
a) Press the button for less than 0.5 seconds to switch on the light;
press again to switch it off.
b) Press and hold the button for more than 0.5 seconds to adjust
brightness continuously. After releasing the button, the brightness
level is saved into memory and pressing the button shortly later
will switch on/off the light to this intensity.
c) Brightness may be adjusted at any time by pressing and holding
the button. The receiver remembers the adjusted value even after
disconnecting from power supply.
<0.5s
t=2s..30min
After pressing the button, the light will
start to switch on during the selected
time period, ranging from 2 seconds to
30 minutes.
Device description
<3s <3s
3s
a
Function 3 - press 3x
-15 to + 50 °C
any*
free at lead-in wires
IP 30
III.
2
3x0.75 mm2
90 mm
49 x 49 x 21 mm
40 g
EN 60669, EN 300 220, EN 301 489
Directives RTTE,Gov. Reg. No..426/2000Sb(Directives 1999/EC))
<3s >3s
<3s
<0.5s
After pressing the button, the light will
start to switch off during the selected
time period, ranging from 2 seconds to
30 minutes.
If the light is off, press the button to
switch it on. If the light is on, press the
button to switch it off.
Wiring with different types of load
L
N
L
N
Device status indicator
N
Program button (ON/OFF
manual control)
L
V
L
N
N
L
V
N
L
V
RLC
RLC
RLC
RFDA-11B
RFDA-71B
RFDA-11B
RFDA-71B
RFDA-11B
RFDA-71B
Neutral conductor
Output to appliance
Phase conductor
R-Resistance
32
L-Induction
C-Capacity
RF receiver: Universal dimming actuator RFDEL-71B
!
serves for controlling light intensity of these light sources:
source type
symbol
description
R
resistive bulb, halogen lamp
resistive
60mm
21mm
L
inductive coil transformer for low-voltage halogen lamps
inductive
C
electronic transformer (capacitive load) for low-voltage halogen lamps LED
capacitive
!
!
!
CONTROL
ELEMENTS
!
EAN code
8595188145121
!
Technical parameters
!
RFDEL-71B
Supply voltage:
Apparent power:
Dissipated power:
Supply voltage tolerance:
Connection:
Dimmed load:
Output
Contactless:
Load capacity:
Controlling
RF command from the transmitter:
Range in open space:
Manual control:
Glow lamp connection:
Further data
Operating temperature:
Storage temperature:
Operating position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Terminals (CY wire, Cross-section):
Terminal length:
Dimensions:
Weight:
Related standards:
230 V AC / 50 Hz
1.1 VA
0.8 W
+10/ -15 %
4-wire, with “NEUTRAL“
R,L,C, LED, ESL
!
LED
LED lamps and LED light sources, 230 V
ESL
dimmable energy-saving tubes
the type of light source is set by the switch on the front of the of the device
max. output load is 160 W
option of controlling existing external button and RF transmitter
electronic overcurrent and thermal protection - switches off the output in case of overload,
short circuit or overheating
setting min. brightness by potentiometer on the front of the device eliminates flashing of various types of light sources
by installing the actuator under an existing button, you have the option of further control of lighting using RF
Control wireless transmitters or the RF Touch touch screen unit. This then makes it possible to control the actuator
with the existing button or wireless controller
the actuator can be controlled by up to 32 channels
6 light functions, ON/OFF function (identical with the functions of RFDA-71B) see p. 32
Description of function
Controlling the dimmer:
2 x MOSFET
160 W*
! a short press of the button (< 0.5s) switches light on or off
! a long press (> 0.5s) enables fluid regulation of light intensity
! for the ESL load, when the lamp is switched off, a short press increases the brightness to the maximum level (when the
energy saver „lights up“) and then drops to the preset level
868 MHz
up to 160 m (more on range on p. 44)
button PROG (ON/OFF), external button
No
Setting the minimum brightness:
! performed using the potentiometer on the front side
! used mainly when dimming energy-saving fluorescent tubes and LED bulbs due to their differing illumination characteristics
! it prevents unwanted flashing when setting the actuator to the min. brightness
-20 up to + 35°C
-30 up to +70°C
any*
free at lead-in wires
IP 30 under normal conditions
III.
2
4 x 0.75 mm2
90 mm
49 x 49 x 21 mm
40 g
EN 607 30-1 ED.2
Description of the device
Potentiometer for setting
minimum brightness
Switch for selecting
the light source
Device status
indication
Button
Prog
* capacity for power factor cos φ=1
The power factor of dimmable LEDs and ESL bulbs ranges from cos φ = 0.95 up to 0.4.
An approximate value of maximum load may be obtained by multiplying the load capacity of the
dimmer by the power factor of the connected light source.
Output to appliance
Phase conductor
External button
Neutral conductor
Connection
L
C
coil transformer
electronic transformer
L
N
L
N
V
L
N
S
LED, ESL, R
L
N
V
L
N
S
V
L
N
S
33
RF receiver: dimming actuator RFDA-73M/RGB
!
!
3M
!
!
!
!
!
!
!
used to dim LEDs, an LED strip and RGB LED strip with power supply 12-24V DC
control is performed with RF Control wireless transmitters or signal 0-10V/ 1-10V, or iNELS DAC converter iNELS
The function (FUNC) selection switch enables setting of colored light scenes
upon switching off, the set level is stored in the memory, and when switched back on, it returns to the most
recently set value
the load for individual channels is 3x5A, which in practice enables dimming of approx. 60W = an 8m RGB LED strip
the supply voltage to the equipment and the LED strip must be the same. If the RFDA-73M/RGB is supplied by 12V
DC, LED strip / source should also be supplied by 12V DC. The same applies for a supply voltage of 24V DC
programming is performed button PROG located on the front panel of the device
supplied with internal antenna SMA (M)
optional accessories: external antenna AN-E.
More information on p. 45
EXTERNAL ANTENNA AN-E
EAN code
RFDA-73M/RGB: 8595188146814
External antenna AN-E: 859415759012
Internal antenna AN-I: 8595188161862
Technical parameters
RFDA-73M/RGB
Supply terminals:
Supply voltage:
Maximum power without load:
Output
Dimmed load:
Un+, GND
12-24 V DC stabilized
0.8 W
Number of channels:
Rated current:
Peak current:
Switching voltage:
Controlling
RF by command from the transmitter:
Ext. signal:
Ext. signal:
Range in open space:
Load capacity of output +10V:
Further data
Operating temperature:
Storage temperature:
Working position:
Mounting:
Protection:
Contamination degree:
Cross-section of connecting wires (mm2):
Dimensions:
Weight:
Related standards:
Description of the device
Input 0-10 / 1-10V controlling overall brightness
Inputs 0-10 / 1-10V controlling colors
LED strip 12V,24V with common anode
RGB LED strips 12V, 24V with common anode
3
3x5 A
3x10 A
Un
Yellow LED STATUS
Programming
button
Voltage supply GND
-20 up to + 50 °C
-30 up to + 70 °C
any
DIN rail EN 60715
IP 20 from front panel
2
max 1x2.5, max 2x1.5/ with a hollow max. 1x2.5
90 x 52 x 65 mm
130 g
EN 60730-1; EN 60730-2-11
RF SINGLE
W
Single LED
W
W
Function selection
switch
Color and brightness
preset for RF
Frequency of output PWM
Voltage supply Un+
Outputs for load
connection
Description of function selection switch:
TERM 1-10V
TERM 0-10V
RF SINGE
Control options
TERM 0-10/1-10V DC
RF COLOR
RF RGB
Control options:
RF RGB
RF COLOR
34
RF antenna
868 MHz
0-10 V, 1-10V
1-10 V
up to 160 m
10 mA
Output variations:
RGB strip
Green LED power supply
Auxiliary voltage
output +10V
TERM 0-10V DC
RF receiver: dimming actuator RFDA-73M/RGB
Description of functions
RF RGB
RF RGB mode for controlling RGB LED strips.
In the RF RGB programming mode, colors are automatically assigned to
individual transmitter buttons.
Note: It is only possible to use this function for RFWB-40, RF KEY and RFIM-40
RF RGB
LEGEND
Buttons:
R - red
G - green
B - blue
M - master setting of overall scene brightness
R
Img.1
B
G
M
R
G
B
12V DC
RF KEY
RF COLOR
Mode RF COLOR for controlling RGB LED strips, where it is possible to
choose the color for an individual transmitter button. The device is brought
into programming mode when the strip changes color. By pressing RF COLOR
transmitter, the color is automatically set under the given button.
Note: It is only possible to use this function for RFWB-40, RF KEY and
RFIM-40
V
Img.2
V
V
LEGEND
Buttons:
V - free selection of color
V - free selection of color
V - free selection of color
M - master setting of overall scene brightness
M
RF KEY
V
V
V
12V DC
RF SINGLE
Mode RF SINGLE.
It works in a mode, where it acts like 3 separate dimmers for RF
SINGLE 12-24 V, meaning it dims 3 blue strips. Each channel can be
programmed independent of each other and has its own address.
Img.3
S2
S1 M
S3
LEGEND
Buttons:
S1- single color
S2 - single color
S3 - single color
M - master setting of overall scene brightness
RF SINGLE
RF KEY
S1
S2
S3
12V DC
TERM 010V and TERM 110V
MODES TERM 0 -10V AND TERM 1-10V.
Inputs 0 - 10V and 1 -10V serves for controlling iNELS with the help
of DAC2-4M or DAC2-04B. So it‘s possible to combine and control
LED strips via iNELS.
EST -2
TERM 1-10V
TERM 0-10V
Img.4
R
G
B
12V DC
35
RF receiver: Switched socket RFSC-11, RFSC-61
!
!
!
!
!
!
!
!
!
CONTROL ELEMENTS
EAN code
RFSC-11/F: 8595188145596 (French)
RFSC-11/S: 8595488145619 (Schuko)
RFSC-11/B: 8595188145114 (British)
RFSC-61/F: 8595188145602 (French)
RFSC-61/S: 8595488145626 (Schuko)
RFSC-61/B: 8595188145442 (British)
Technical parameters
Supply voltage:
Apparent power:
Dissipated power:
Supply voltage tolerance:
Output
Number of contacts:
Rated current:
Switching power:
Peak current:
Switching voltage:
Min. switching power DC:
Mechanical service life:
Electrical service life (AC1):
Controlling
RF command from the transmitter:
Manual control:
Range in open space:
Further data
Operating temperature:
Working position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Dimensions:
Weight:
Related standards:
French
CZ, SK, PL, FR
RFSC-11
RFSC-61
British
GB
Functions and their programming
230 V AC / 50 - 60 Hz
6 VA
0.7 W
+10 %; -15 %
1x switching (AgSnO2)
16 A / AC1
4000 VA / AC1, 384 W / DC
30 A / <3 s
250 V AC1 / 24 V DC
500 mW
3x107
0.7x105
Button
rogram.
mode
1x press
The output contact will close by
pressing the button and open by
releasing the button.
Close
rogram.
mode
2x press
The output contact will close by
pressing the button.
Switch off
rogram.
mode
3x press
The output contact will close by
pressing the button.
Delayed return
Impulse relay
Delayed start
868 MHz
button PROG (ON/OFF)
up to 200 m
-15 up to + 50 °C
any *
in a network socket 230 V AC
IP 30
III.
2
60 x 120 x 80 mm
195 g
EN 60669, EN 300 220, EN 301 489
Directives RTTE, NVč.426/2000Sb (directive 1999/ES)
Supply voltage
indication
Device status
indication
Schuko
HU, DE, RU, AT, RO
1M
Description of the device
36
this is a quick solution for wireless control of appliances into a socket, when the switching socket
is connected between the existing socket and controlled appliance
RFSC-11: single-function design - switch on, switch off
RFSC-61: multifunction design - button switch on/off, impulse relays, delayed return, delayed start programming
and manual control ON/OFF is performed by pressing the button on the front panel of the device
switching output up to 4000 VA
the switched socket may be controlled by up to 32 channels
option of assigning receivers to the RF Control system
LED signaling of device status on the front panel:
- red - status
- green - power indication
option of setting function delayed return, delayed start with time interval from 1 up to 10 hours
produced in three designs of sockets and plugs:
Button Prog
rogram.
mode
4x press
The output contact will switch to
the opposite position with each
press of the button. If the contact
was closed, it will open and vice
versa.
Example of use
rogram.
mode
5x press
The output contact will close by
pressing the button and open after
the set time interval has elapsed.
rogram.
mode
6x press
The output contact will close by
pressing the button and open after
the set time interval has elapsed.
RF receiver: Switching actuators RFSA-11B, RFSA-61B, RFSA-62B
!
!
RF switching actuators serve to control electrical appliances, lights, heating, garage door, sockets, etc.
switching actuator design
Switching
actuators
60mm
21mm
Output
Rated current
16A
Channel 1 Channel 2
Number of functions
8A
1
6
RFSA-11B
RFSA-61B
RFSA-62B
!
RFSA-61B
1B
!
RF
RFSA-62B
A 62B
!
CONTROLS ELEMENTS
!
!
1M
!
EAN code
RFSA-11B: 8595188136839 / RFSA-61B: 8595188136242 / RFSA-62B: 8595188142816
Technical parameters
Supply voltage:
Apparent input:
Dissipated power:
Supply voltage tolerance:
Output
Number of contacts:
Rated current:
Switching power:
Peak current:
Switching voltage:
Max. DC switching power:
Mechanical service life:
Electrical service life (AC1):
Control:
RF, by command from transmitter:
Manual control:
Range in free space:
Other data:
Operating temperature:
Operating position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Terminals (CY wire, cross-section):
Length of terminals:
Dimensions:
Weight:
Related standards:
RFSA-11B
RFSA-61B
RFSA-62B
!
with the 2-channel design of the RFSA-62B multifunction switching actuator, a function can be
programmed for each channel independently
multifunction actuator functions: button, ON/OFF, impulse relay, delayed return, delayed start
for programming and manual control ON/OFF, press the Prog button
RFSA-11B and RFSA-61B switching actuators can be controlled by up to 32 channels, while RFSA-62B
switching actuator can be controlled by 16 channels at 1 relay
possibility to assign receivers to the RF Control system
LED indicator of the device status on the front panel
installation box design (such as KU-68)
Functions and their programming
230 V AC / 50 - 60 Hz
7 VA / cos φ = 0.1
0.7 W
+10 %; -15 %
1x switching (AgSnO2)
16 A / AC1
4000 VA / AC1, 384 W / DC
30 A / <3 s
250 V AC1 / 24 V DC
500 mW
3x107
0.7x105
Button
2 x switching (AgSnO2)
8 A / AC1
2000 VA / AC1
10 A / <3 s
250 V AC1
500 mW
1x107
1x105
868 MHz
PROG (ON/OFF) button
up to 200 m
rogram
mode
Switch On
Press 1x
The output contact will close by
pressing the button and open by
releasing the button.
rogram
mode
Press 2x
The output contact will close
by pressing the button.
Switch Off
rogram
mode
The output contact will open be
pressing the button.
Delayed return
Impulse relay
Press 3x
Delayed start
up to 100 m
-15 to + 50 °C
any *
free at lead-in wires
IP 30
III.
2
2x 0.75 mm2 , 2x 2.5 mm2
1x2.5; 3 x 0.75 mm2
90 mm
49 x 49 x 21 mm
46 g
EN 60669, EN 300 220, EN 301 489
Directives RTTE,Gov. Reg. No..426/2000Sb(Directives 1999/EC))
rogram
mode
Press 4x
The output contact will switch to the
opposite position with each press of
the button. If the contact was closed,
it will open and vice versa.
rogram
mode
Press 5x
The output contact will close by
pressing the button and open after
the set time interval has elapsed.
rogram
mode
Press 6x
The output contact will open by
pressing the button and close after
the set time interval has elapsed.
Wiring
L
N
L
N
L
N
* For more information, see p. 36
RFSA-11B
RFSA-61B
RFSA-11B
RFSA-61B
RFSA-62B
Device description
RFSA-61B
RFSA-62B
Indication of operating
and programming mode
Indication of operating
and programming mode
Program button (ON/OFF
Program button
(ON/OFF manual control)
manual control)
Neutral conductor
Output relay contacts
Phase conductor
Neutral conductor
Phase conductor
Output relay contacts
37
RF receiver: Switching actuator with external input RFSAI-61B
!
!
60mm
21mm
!
!
!
!
!
!
by installing the actuator under the existing button, we achieve further lighting control options when
using RF Control wireless transmitters or the RF Touch touch screen unit. It is thus possible to control the
actuator by an existing button, but also by a wireless controller
the switching actuator serves for controlling appliances, lights, heating, garage doors, sockets, etc.
function of a multifunction actuator: button switch on/off, impulse relays, delayed return, delayed start
programming and manual control ON/OFF are performed using the Prog button
the switching actuator RFSAI-61B can be controlled by up to 32 channels, including external input
the external button must be potential
free signaling of the device status by LED on the front panel
designed for use in an installation cabinet (ex. KU-68)
CONTROL ELEMENTS
Functions and their programming
1M
Button
Technical parameters
RFSAI - 61B
Supply voltage:
Apparent power:
Dissipated power:
Supply voltage tolerance:
Output
Number of contacts:
Rated current:
Switching power:
Peak current:
Switching voltage:
Min. switching power DC:
Mechanical service life:
Electrical service life (AC1):
Controlling
RF command from the transmitter:
Manual control:
External button:
Range in open space:
Further data
Voltage of open contact:
Resist. of connection for closed
contact:
Resist. of connection for open
contact:
Galvanic isolation of input:
Operating temperature:
Working position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Terminals (CY wire, Cross-section):
Terminal length:
Dimensions:
Weight:
Related standards:
230 V AC / 50 - 60 Hz
7 VA / cos φ = 0.1
0.7 W
+10 %; -15 %
1x switching (AgSnO2)
16 A / AC1
4000 VA / AC1, 384 W / DC
30 A / <3 s
250 V AC1 / 24 V DC
500 mW
3x107
0.7x105
868 MHz
button PROG (ON/OFF)
max. 12 m cable
up to 200 m
rogram.
mode
1x press
The output contact will close by
pressing the button and open by
releasing the button.
Close
rogram.
mode
4x press
The output contact will switch to
the opposite position with each
press of the button. If the contact
was closed, it will open and vice
versa.
2x press
rogram.
mode
The output contact will close by
pressing the button.
Impulse relay
rogram.
mode
Switch off
Delayed start
5x press
rogram.
mode
The output contact will open by
pressing the button and close after
the set time interval has elapsed.
The output contact will open by
pressing the button and close after
the set time interval has elapsed.
<1 kΩ
>10 kΩ
No
-15 up to + 50 °C
any *
free at lead-in wires
IP 30
III.
2
2x 0.75 mm2 , 2x 2.5 mm2
90 mm
49 x 49 x 21 mm
46 g
EN 60669, EN 300 220, EN 301 489
directive RTTE, NVč.426/2000Sb (directive 1999/ES)
Terminal for connecting
an external button
Device status
indication
Programming button
(manual control ON/OFF)
Neutral conductor
Phase conductor
Output contact relay
Example of use
L
N
RFSAI-61B
L N
RFSAI-61B
38
6x press
3V
Connection
*For more information, see p. 48
The output contact will close by
pressing the button.
Delayed return
rogram.
mode
3x press
RF receiver: Switching actuator RFSA-61M , RFSA-66M
!
1M
!
3M
!
!
!
!
RFSA-61M
RFSA-66M
EXTERNAL ANTENNA AN-E*
CONTROLS ELEMENTS
!
!
!
RF switching actuators serve to control electrical appliances, lights, heating, garage door, entrance
gates, etc.
switching actuator designs:
RFSA-61M: 1-channel switching actuator in 1-MODULE design with internal or external antenna
RFSA - 66M: 6-channel switching actuator in 3-MODULE design with internal or external antenna
multifunction actuator functions: button, ON/OFF, impulse relay, delayed return, delayed start
for programming and manual control ON/OFF, press the Prog button
each relay of switching actuator can be controlled by up to 32 channels (1 channel is represented
by 1 button on the wireless wall switch button, keychain or the RF Touch-W / RF Touch-B unit)
LED indicator of the device status on the front panel
possibility to assign receivers to the RF Control and RF Touch systems
galvanically isolated power supply
an internal antenna is included in the standard package, external antenna is available on request only
1M
EAN code
RFSA-61M: 8595188137003/ RFSA-66M: 8595188142830 (internal antenna is included in the standard package).
Internal antenna AN-I: 8595188161862
External antenna AN-E: 859415759012
Technical parameters
RFSA-66M
RFSA-61M
Functions and their programming
110 - 230 V AC / 50 - 60 Hz
2.7 VA / cos φ = 0.6
min. 2 VA / max. 5 VA
1.62 W
min. 0.5 W / max. 2.5 W
+10% / -25 %
Supply voltage:
Apparent input:
Dissipated power:
Supply voltage tolerance:
Output
Number of contacts:
1x switching (AgSnO2)
16 A / AC1
4000 VA / AC1, 384 W / DC
30 A / <3 s
250 V AC1 / 24 V DC
500 mW
3x107
0.7x105
Rated current:
Switching power:
Peak current:
Switching voltage:
Max. DC switching power:
Mechanical service life:
Electrical service life (AC1):
Control:
RF, by command from transmitter:
Manual control:
Range in free space:
Other data:
Operating temperature:
Operating position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
3x switching (AgSnO2)
3x switching (AgSnO2)
8 A / AC1
2000 VA / AC1
10 A / <3 s
250 V AC1
500 mW
1x107
1x105
Button
rogram
mode
Switch On
rogram
mode
Press 1x
The output contact will close by
pressing the button and open by
releasing the button.
Impulse relay
The output contact will close by
pressing the button.
Press 3x
The output contact will open by
pressing the button.
Delayed return
Delayed start
rogram
rogram
Press 4x
Press 5x
-15 °C to + 50 °C
mode
mode
any *
The output contact will switch to The output contact will close by
the opposite position with each pressing the button and open after
DIN rail EN 60715
press of the button. If the contact the set time interval has elapsed.
IP20 from the front panel
was closed, it will open and vice
III.
versa.
2
Device description
max. 1x2.5, max. 2x1.5 / with a hollow max. 1x2.5
90 x 17.5 x 64 mm
90 x 52 x 65 mm
Power supply terminals
RFSA-61M
74 g
137 g
264 g
310 g
EN 60669, EN 300 220, EN 301 489
A2
Power supply
A1
Device status
Directives RTTE,Gov. Reg. No..426/2000Sb(Directives 1999/EC)) indication
indicator
Antenna connector
Dimensions:
Weight:
Related standards:
* For more information, see p. 48
rogram
mode
Press 6x
The output contact will open by
pressing the button and close after
the set time interval has elapsed.
RFSA-66M
Program button
(manual control)
RFSA-61M
Un
Power supply terminals
RFSA-66M
L
N
Power supply indication
15
A1
rogram
mode
Press 2x
868 MHz
PROG (ON/OFF) button
up to 200 m
Connecting conductor cross-section (mm2):
Wiring
Switch Off
A2
A1 A2
1 6 18
A1
Output relay contacts
Program button
(manual control)
Antenna connector
18 15 28 25 38 35
Output relay contacts
65 66 68
45 46 48 55 56 58
15 16 18
45 46 48 55 56 58 65 66 68
Device status
indicator
Output relay contacts
39
RF receiver: Switching actuator with enhanced IP65 protection RFUS-11, RFUS-61
RF switching actuators with enhanced IP 65 protection are designed for use in harsh environments:
dusty, dirty environments, outdoors, cellars, greenhouses, boiler rooms, reservoirs and tanks,
refrigeration boxes, etc.
! RFUS-11: single-function design - switch on, switch off
! RFUS-61: multifunction design - button switch on/off, impulse relays, delayed return, delayed start
! programming and manual control ON/OFF is performed using the Prog button, placement inside cabinet
! switching actuators may be controlled by up to 32 channels
! option of assigning receivers to the RF Control system
! device status signaling by LED on the front cover
! bushing M16x1.5 for connecting cable with max. diameter of 8 mm
!
IP65
60mm
21mm
CONTROL ELEMENTS
Functions and their programming
1M
Close
Button
EAN code
Switch off
RFUS-11: 8595188140546 / RFUS-61: 8595188145268
Technical parameters
Supply voltage:
Apparent power:
Dissipated power:
Supply voltage tolerance:
Output
Rated current:
Number of contacts:
Switching power:
Peak current:
Peak current:
Min. switching power DC:
Mechanical service life:
Electrical service life (AC1):
Controlling
RF command from the transmitter:
Manual control:
Range in open space:
Further data
Operating temperature:
Operating position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Cross-section of connecting wires (mm2)
Recommended power cord:
Dimensions:
Weight:
Related standards:
RFUS-11
RFUS-61
230 V AC / 50 - 60 Hz
5 VA / cos φ = 0.1
0.6 W
+10 %; -15 %
1x press
rogram.
mode
1 x switching (AgSnO2)
12 A / AC1
3000 VA / AC1, 384 W / DC
30 A / <3 s
250 V AC1 / 24 V DC
500 mW
3x107
0.7x105
N
L
L
N
Example of use
Opening for wall
mounting Ø 4.3mm
Indication of operating and
programming mode
Output contact relay
Bushing M16x1.5 for connecting cable
with max. diameter of 8 mm
40
Delayed start
5x press
6x press
rogram.
mode
The output contact will open
by pressing the button and
close after the set time interval
has elapsed.
The output contact will open by
pressing the button and close
after the set time interval has
elapsed.
3 - wire connection
4 - wire connection
Antenna
Opening for wall
mounting Ø 4.3mm
3x press
Description of the device
-15 up to + 50 °C
any
screws
IP 65
III.
2
max. 1x2.5,max. 2x1.5/s a hollow max.1x2.5
CYKY 3x1.5 (CYKY 4x1.5)
136 x 62 x 34 mm
146 g
EN 60669, EN 300 220, EN 301 489
Directives RTTE, NVč.426/2000Sb (directives 1999/ES)
Description of the device
Phase conductor
rogram.
mode
The output contact will switch
to the opposite position with
each press of the button. If the
contact was closed, it will open
and vice versa.
868 MHz
button PROG (ON/OFF)
up to 200 m
rogram.
mode
The output contact will close
by pressing the button.
Delayed return
4x press
rogram.
mode
2x press
The output contact will close by
pressing the button.
Impulse relay
* For more information, see p. 48
Programming button
(manual control)
Neutral conductor
rogram.
mode
The output contact will close by
pressing the button and open
by releasing the button.
RFUS-61
IP65
N
L
18
15
16
galvanically isolated
contact
L
N
18
15
16
RF receiver: Switching actuator with temperature sensor RFSTI-11B, RFSTI-11/G
!
!
30mm
Ø65mm
!
RFSTI-11/G
CONTROLS ELEMENTS
!
60mm
21mm
!
EAN code
RFSTI-11/G:
RFSTI-11/G white:
RFSTI-11/G ivory:
RFSTI-11/G ice:
RFSTI-11B
EAN code
RFSTI-11B: 8595188135849
Technical parameters
used for temperature measurement and, at the same time, for switching of the heating circuit.
Switches the boiler, floor heating, air conditioning, etc.
wireless actuator with temperature sensor functions:
- temperature measurement
- processing and sending information to RF Touch each 5 minutes (by sudden change of temperature,
sends the signal within 1 minute)
- receiving instruction to switch on the heating device
RFSTI-11B: - installation box design (KU-68)
- LED indicator of the device status on the front panel
RFSTI-11/G: - LOGUS90 design with manual control by buttons on the front panel
- LED indicator of the switch status on the front panel - ON - red LED, OFF - blue LED
- an in-built sensor, terminals for connection of external sensor (see the accessories, page 45)
possibility to assign receivers to the RF Control system
switching actuator with temperature sensor is designed to be assigned to RF Touch-W (RF Touch-B) unit
RFSTI-11B
RFSTI-11/G pearl:
8595188142625 (device, cover)
RFSTI-11/G aluminium: 8595188142632 (device, cover)
RFSTI-11/G grey:
8595188142649 (device, cover)
Device description
RFSTI-11/G
230 V AC / 50 - 60 Hz
7 VA / cos φ = 0.1
0.7 W
+10 %; -15 %
1x internal NTC thermistor;
1x external TZ/TC teperature
1x external TZ/TC
senzor input
temperature sensor input
-20 to +50 °C; 0.5 °C of the range
Temp. measurement range and accuracy:
Output
1x switching (AgSnO2)
Number of contacts:
16 A / AC1
8A / AC1
Rated current:
4000 VA / AC1, 384 W / DC
2000VA / AC1; 240W / DC1
Switching power:
30 A / <3 s
Peak current:
250 V AC1 / 24 V DC
Switching voltage:
500 mW
Max. DC switching power:
3x107
Mechanical service life:
0.7x105
Electrical service life (AC1):
Control:
868 MHz
RF, by command from transmitter:
x
buttons
Manual control:
up to 160 m
Range:
Other data:
-15 to + 50 °C
Operating temperature:
red LED
blue, red LED
Status indication:
any
vertical*
Operating position:
free at lead-in wires
in an installation box
Mounting:
IP 30
IP 20
Protection:
III.
Overvoltage category:
2
Contamination degree:
x
Outlets (CY wire, cross-section, length): 2x 0.75mm, 2x 2.5mm2,90mm
max. 1x2.5, max. 2x1.5 /
Cross-section of connecting
x
with a hollow max. 1x2.5
cables (mm2):
49 x 49 x 21 mm
84 x 89 x 30 mm
Dimensions:
46 g
68 g
Weight:
EN 60669, EN 300 220, EN 301 489
Related standards:
Directives RTTE,Gov. Reg. No..426/2000Sb (Directives 1999/EC))
Supply voltage:
Apparent input:
Dissipated power:
Supply voltage tolerance:
Temperature measurement input:
8595188142779 (device, white cover, white frame)
8595188142595 (device, cover)
8595188142601 (device, cover)
8595188142618 (device, cover)
RFSTI-11B
Connection to TC/TZ external
temperature sensor
Device status indicator
Neutral conductor
Output relay contacts
Phase conductor
RFSTI-11/G
Internal temperature
sensor
Device status indicator blue
LED (OFF)
Device status indicator red
LED (ON)
Control
buttons
Communication with RF Touch unit
RFSTI-11/G
Measuring of temperature with using internal or
external sensors with the manual control option.
Available in the LOGUS90 design.
A
RFSTI-11B
The external sensors
measures temperature
and sends the signal to
RF Touch, which activates
switching on heating.
RFSTI-11B
B
Wiring
RFSTI-11B
L
N
L
N
RFSTI-11/G
L
N
V
T T
T T
External sensor
External sensor
41
RF receiver: Wireless thermostat RFATV-1
!
!
!
!
!
CONTROL ELEMENTS
!
used to measure the temperature in the given zone and also for wireless control of a radiator (heater)
valve . It is an ideal solution for reconstructions = quick integration of heating regulation elements
into your apartment or house
function: measures temperature and sends its value to RF Touch in 5-minute intervals
RF Touch assess the sent temperature and by a set program, opens or close the radiator
(heater) valve
has a built-in internal sensor
option of assigning to the RF Touch unit (up to 30 detectors)
battery power supply enables quick assembly without cutting into the wall or complex modifications
- battery indicator on RF Touch display
package includes:
- adapters Danfoss RAV, RA, RAVL
- 2x batteries AA 1.5V
EAN code
RFATV-1: 8595188145138
Technical parameters
RFATV-1
Description of the device
2 x 1.5 V batteries AA
1 year
Supply voltage:
Battery life:
Control
Broadcasting frequency
RF command from the transmitter:
Range in open space:
Further data
Operating temperature:
Working position:
Protection:
Dimensions:
Thermostat end:
Piston stroke:
Controlling force:
Related standards:
868 MHz
RF Touch
up to 100 m
0 up to +50 °C
any
IP 40
65x65x48 mm
M 30 x 1,5
max. 4 mm
max. 100 N
EN 60730
Valve
Batteries
Example of use
RFATV-1
Adapters
Type of valve
Type of adapter
Danfoss RAV
(the valve plunger must be fitted with the
enclosed pin)
Danfoss RA
Danfoss RAVL
Package contents
Thermostat
2x batteries AA1.5V
Adapters
Instruction manual
42

LEGEND
Command to perform function
Sent information
on temperature
RF receiver: Actuator with analog output 0(1)–10V RFDAC-71B
!
!
60mm
21mm
!
!
!
CONTROL ELEMENTS
!
!
EAN code
RFDAC-71B: 8595188142809
110 - 230 V AC / 50 - 60 Hz
3 VA
1.2 W
+10 /-15 %
Connection example: dimming of fluorescent
tubes with dimmable ballast
L
N
Connection example:
with thermo valve
110-230V AC
0(1)-10 V / 10 mA
L
N
thermo valve
24V
-15 to + 50 °C
any*
free at lead-in wires
IP 30
III.
2
CY wire, cross section 3 x Ø 0.75 mm2, 2 x Ø 2.5 mm2
90 mm
49 x 49 x 21 mm
52 g
EN 60669, EN 300 220, EN 301 489
Directives RTTE,Gov. Reg. No..426/2000Sb(Directives 1999/EC))
N
L
V
L
N
0-10V
1-10V
V
L
N
T
868 MHz
PROG (ON/OFF) button
up to 200 m
20 mm
1x AgSnO2, switches the phase conductor
16A / AC1
4000VA / AC1
250V AC1
3x107
0.7x105
red LED / green LED
0(1)-10V / PROG button
T
Supply voltage:
Apparent input:
Dissipated power:
Supply voltage tolerance:
Potential-free analog
output/max.current:
Control:
RF, by command from transmitter:
Manual control:
Range in free space:
Minimum control distance:
Contact relay:
Rated current:
Switching power:
Switching voltage:
Mechanical service life:
Electrical service life:
Indication:
Output selection:
Other data:
Operating temperature:
Operating position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Terminals (CY wire, cross-section):
Length of terminals::
Dimensions:
Weight:
Related standards:
Wiring
RFDAC-71B
T
Technical parameters
the actuator is intended for continuous regulation of devices controlled with analog connected voltage 0(1) - 10V
it is particularly suitable to use:
- in combination with a dimmable control gear to dim fluorescent tubes
- to control other power dimmers
- to control other regulators (thermo valves, heating stopcocks, ventilation, etc.)
simple use:
- press the transmitter button shortly to switch on/off the appliance circuit and to set the voltage at the analog
output to the latest set value
- press and hold the transmitter button to control voltage at the analog output in the range between 0(1)–10V
each actuator can be controlled by up to 32 channels (1 channel is represented by 1 button on the wireless wall
switch button, keychain or the RF Touch)
the Prog button serves to:
- select the mode of output voltage 0–10V (green LED) or 1-10V (red LED)
- programming
- manual control
RFDA-71B: multifunction - 7 program functions: 6 different “light functions,” ON/OFF function
installation box design (such as KU-68)
24V AC
L1
L2
Example of use
RFDAC-71B + DIML
Switching and dimming of fluorescent tubes
Next function
Start
of light
Finish
of light
RFDAC-71B
+
Thermo valve ALPHA AA 0–10V
Heating regulation
Settings
0-10V
* For more information, see p. 48
Device description
Device status indicator
Program button (ON/OFF manual
control)
Switched output contact (L)
0-10V
Phase conductor
Analog output
Suitable ballast:
DIML
see p. 44
Suitable thermo valve:
ALPHA 0-10 V
see p. 44
Neutral conductor
43
Accessories: Thermo valve ALPHA AA, dimmable ballast DIML
Thermo valve ALPHA AA 0–10V, ALPHA AA 230V, ALPHA AA 24V
EAN code
Alpha AA 0-10 V 4031602004475
Alpha AA 230V, NC 4031602000286
Alpha AA 230V, NO 4031602000309
Alpha AA 24V, NC 4031602000293
Alpha AA 24V, NO 4031602000316
Technical data
Operating voltage:
Operating input:
Input control voltage:
Settings:
Protection:
Conductor:
Mean stopping time:
Stopping force:
Cable length:
Color:
Dimensions h/w/d:
ALPHA AA 0-10 V
ALPHA AA 230 V
!
thermo valve ALPHA AA is used to regulate heating in the RF Control and iNELS systems
- ALPHA AA 0–10V in combination with DAC units
- ALPHA AA 230V and ALPHA AA 24V with any system switching actuator
!
ALPHA AA 0–10 V: works in the mode of continuous regulation using control voltage of 0–10V.
The thermo-electronic functional principle meets the following requirements:
- exact regulation behaviour
- long operating life
- noise-free operation
!
ALPHA AA 230V and ALPHA AA 24V: work in the open/closed modes.
Main features:
- noise-free operation
- design: without voltage opened / without voltage closed
- valve position visual indicator
Use:
ALPHA AA 24 V
24 V DC or 24 V AC 50/60 Hz
230 V, 50/60 Hz
24 V AC, 50/60 Hz
1.5W / 300mA for 2 min. at max. 1.8W / 300mA for 2 min. at max. 1.8W / 250mA for 2 min. at max.
0 - 10 V DC
4 mm
4 mm
4 mm
IP 54/II
IP 54/II
IP 54/II
3 x 0.22 mm2
2 x 0.75 mm2
2 x 0.75 mm2
30 s/mm
100 N ±5 %
100 N ±5 %
100 N ±5 %
1m
1m
1m
white RAL 9003
white RAL 9003
white RAL 9003
60.5+4 x 44 x 64 mm
55+5 x 44 x 61 mm
55+5 x 44 x 61 mm
!
the thermo electric valve ALPHA AA is intended for zone or individual regulation
with high differential pressures for all thermostatic valves.
!
regulating thermostatic valves of floor, radiator and convector heating.
!
ALPHA AA 0–10V with built-in electronics for continuous (proportional) control
of thermostatic valves
Benefits:
- continuous (proportional) lift
- suitable for fast heating
Dimmable ballast DIML
EAN code
DIML 1840 - 8009991027845
DIML 22440 - 8009991027913
!
a dimmable DIML ballast to control the brightness of fluorescent T8 tubes
(26 mm in diameter)
!
if the ballast is not included by the manufacturer of the light, it can be additionally
installed into it. It is also possible to make a “retrofit” - i.e. to replace the equipment of
the existing standard fluorescent tube by this dimmable ballast
!
another indisputable benefit (along with the dimming function) is the “soft start”, which
means a slow increase of the brightness of the light, which increases the life of light sources
!
the dimmable ballast is controlled by a 1–10V signal
!
it is supplied in four designs, depending on the power of the light sources (fluorescent
tubes) in the light (see the chart below)
Technical parameters
ta
tc
75
0,5÷1,5
340
359
29
26
1
DL118-40
75
0,5÷1,5
340
359
29
26
1
DL224-40
°c
Article
Code
°c
1x...
DIML1840
05
220÷240
0,103
0,130
0,147
0,174
0,093
0,133
0,153
0,203
0,090
0,120
0,155
0,126
0,178
0,127
0,210
18 T8
25 T8
30 T8
36 T8
18 TC-L
24 TC-L
36 TC-L
40 TC-L
18 TC-F
24 TC-F
36 TC-F
24 T5
39 T5
22 FC-T5C
40 FC-T5C
0,175
0,160
0,160
16
25
27
32
16
22
32
40
16
24
32
22,5
38
22
40
0,98
10...+60
18 T8
18 TC-L
18 TC-F
25T8
16
0,98
10...+60
0,260
0,315
30 T8
36 T8
27
32
0,210
0,275
0,355
0,218
0,280
0,210
0,350
0,210
0,303
24 TC-L
36 TC-L
40 TC-L
24 TC-F
36 TC-F
24 T5
39 T5
22 FC-T5C
40 FC-T5C
22
32
40
22
32
22,5
38
19
40
2x...
DIML22440
44
05
220÷240
0÷60
0,98
10...+60
Accessories: Temperature sensors TC and TZ, antenna‘s
Temperature sensors TC and TZ
EAN code
TC-0 8595188110075
TC-3 8595188110617
TC-6 8595188110082
TC-12 8595188110099
TC
!
the temperature sensors are made of NTC thermistor filled in a metal
!
hollow with a heat-conducing putty (TZ) or inside a PVC terminal (TC, TC3)
!
high electric strength which meets the double insulation requirements
!
TC sensor - supply cable to the TC sensor is made of a 2Dx0.5 mm CYSY conductor
!
TZ sensor - 2Dx0.5 mm VO3SS-F cable with silicone isolation
- suitable particularly for use under extreme temperatures
!
EAN code
TZ-0 8595188140591
TZ-3 8595188110600
TZ-6 8595188110594
TZ-12 8595188110587
TC sensor weight:
TZ sensor weight:
- TC-0 - 5 g
- TC-3 - 108 g
- TC-6 - 213 g
- TC-12 - 466 g
- TZ-0 - 4.5 g
- TZ-3 - 106 g
- TZ-6 - 216 g
- TZ-12 - 418g
TZ
TC
TZ
0..+70 °C
NTC 12K 5 %
(τ65)
92 s / 23 s
(τ95)
306 s / 56 s
Heat-resistant PVC
-40..+125 °C
NTC 12K 5 %
(τ65)
62 s / 8 s
Technical parameters
Range:
Sensor:
In air / water:
In air / water:
Cable material:
Terminal material:
TYPES OF TEMPERATURE SENSORS
FOR RANGE FROM -40 till + 125 °C connectible directly in the terminal block
TC-0 - temperature sensor, length 110 mm
TZ-0 - temperature sensor, length 110 mm
216 s / 23 s
silicone
nickel-plated copper
TC-3 - temperature sensor, length 3 m
TZ-3 - temperature sensor, length 3 m
IP 67
TC-6 - temperature sensor, length 6 m
TZ-6 - temperature sensor, length 6 m
TC-12 - temperature sensor, length 12 m
TZ-12 - temperature sensor, length 12 m
(τ95)
Heat-resistant PVC
IP 67
Terminal:
TYPES OF TEMPERATURE SENSORS
FOR RANGE FROM 0 till + 70 °C connectible directly in the terminal block
τ65 (95): is a time which the sensor is heated to 65 (95)% temperature environment in which the sensor is placed.
Resistive values of sensors in depending on temperature
Temperature ( °C)
Sensor NTC (kΩ)
NTC sensor warming up - by air
Sensor PT100 (Ω)
70
20
14.7
107.8
60
30
9.8
111.7
50
40
6.6
115.5
40
50
4.6
119.4
30
60
3.2
123.2
20
70
2.3
127.1
10
NTC 12 kΩ tolerance is ± 5% at 25 °C
Long-term stability of the sensor resistance PT100 is 0.05% (10.000 Hrs).
Internal antenna AN-I
!
for multifunction switching actuator RFSA-61M, RFSA-66M,
RFGSM, RF-ELAN-003, RFDA-73M/RGB and transmitter
module RFSG-1M into plastic switchboard
!
internal antenna is included in the standard package
of switching actuator
sensitivity 1 dB
!
EAN code
External antenna AN-E: 8595188161862
0
00:00
PV
Silik
PVC – response to air
temperature increase
from 22.5 0C to 58 0C
Silicone- response to air
temperature increase
from 22.5 0C to 63.5 0C
02:53
05:46
08:38
11:31
14:24
17:17
s [min]
External antenna AN-E
!
for multifunctional switching actuator RFSA-61M, RFSA66M, RFGSM, RF-ELAN-003, RFDA-73M/RGB and transmitter
module RFSG-1M for mounting into metal switchboard
!
external antenna AN-E is delivered on request only
!
sensitivity 5 dB
!
cable length 3m
EAN code
External antenna AN-E: 859415759012
45
RF SETS - transmitter and receiver combinations
RFSA-61M - switching actuator with inertial antenna (for mounting in plastic switchboards) External antenna (for mounting in metal switchboards) available on request only.
*
CONTROLLERS
Transmitters
CONVERTERS
x
This SET combination is not available.
DETECTORS

Receivers

RFWB-20/G
RFWB-40/G
RFSC-11
RFSC-61
x
RFSA-61B
RFSA-11B
Basic set
RFSCW-11
+
RFWB-20/G
RFJA-12B/230V
RFIM-40B
JA-80P
JA-81M
JA-82M
x
x
x
x
x
x
x
x
x
x
x
RFSET-SCK-Z1
x
Basic set
RFSC-11
+
RF KEY
RFSET-SCW-F1
RFSET-SCK-F1
Multifunction set
RFSC-61
+
RF KEY
x
RFSET-SW2-Z1
RFSET-SK-Z1
RFSET-SIM2-Z1
Basic set
RFSA-11B
+
RFWB-20/G
Basic set
RFSA-11B
+
RF KEY
Basic set
RFSA-11B
+
RFIM-20B
x
x
x
RFSET-SW-F1
RFSET-SK-F1
RFSET-SIM2-F 1
RFSET-SIM4-F1
RFSET-SO80P-F1
RFSET-SO81M-F1
RFSET-SO82M-F1
x
Multifunction set
RFSA-61B
+
RFWB-40/G
Multifunction set
RFSA-61B
+
RF KEY
Multifunction set
RFSA-61B
+
RFIM-20B
Multifunction set
RFSA-61B
+
RFIM-40B
Multifunction set
RFSA-61B
+
JA-80P
Multifunction set
RFSA-61B
+
JA-81M
Multifunction set
RFSA-61B
+
JA-82M
RFSET-S2W-F1
RFSET-S2K-F1
x
Multifunction set
RFSA-62B
+
RFWB-40/G
Multifunction set
RFSA-62B
+
RF KEY
x
x
x
x
x
RFSET-SMW-F1
RFSET-SMK-F1
x
Multifunction set
RFSA-61M
+
RFWB-40/G
Multifunction set
RFSA-61M
+
RF KEY
x
x
x
x
x
RFSET-JW2-Z1
Basic set
RFJA-12B
+
RFWB-20/G
RFDSC-71
x
RFSET-DSCW-F1
RFSET-DW2-Z1
Multifunction set
RFDSC-71
+
RFWB-20/G
RFDA-71B
Basic set
RFDA-11B
+
RFWB-20/G
x
RFDAC-71B
DIMMING
ANALOG ACTUATOR
46
RFIM-20B
Multifunction set
RFSC-61
+
RFWB-40/G
RFDA-11B
RFDSC-11
ROLLER BLIND
RFSA-61M*
RFSA-62B
SWITCHING
RFSET-SCW-Z1
RF KEY
x
RFSET-JK-Z1
RFSET-JIM2-Z1
x
Basic set
RFJA-12B
+
RF KEY
Basic set
RFJA-12B
+
RFIM-20B
x
x
x
x
RFSET-DSCW-Z1
RFSET-DSCK-Z1
Basic set
RFDSC-11
+
RFWB-40/G
Basic set
RFDSC-11
+
RF KEY
x
x
x
x
x
x
Multifunction set
RFDSC-71
+
RF KEY
x
x
x
x
x
Basic set
RFDA-11B
+
RF KEY
x
x
x
x
x
RFSET-DW-F1
RFSET-DK-F1
RFSET-DIM2-Z1
RFSET-DIM4-F1
Multifunction set
RFDA-71B
+
RFWB-40/G
Multifunction set
RFDA-71B
+
RF KEY
Basic set
RFDA-11B
+
RFIM-20B
Multifunction set
RFDA-71B
+
RFIM-40B
x
x
x
x
x
x
x
x
RFSET-DSCK-F1
RFSET-DK-Z1
x
RFSET-DCW-F1
RFSET-DCK-F1
Multifunkční set
RFDAC-71B
+
RFWB-40/G
Multifunction set
RFDAC-71B
+
RF KEY
Easy and quick program setting
PROGRAMMING OF RF TOUCH CONTROL UNIT
PROGRAMMING OF WIRELESS WALL SWITCH BUTTON AND SWITCHING ACTUATOR
Mount the receiver in an installation box, under a light or into a switchboard,
according to the design of the receiving actuator.
1
Step 1 – Location of RF Touch and RF units
Keep in mind that the radio signal range for RF installations depends on the building structure, materials used and
the manner of unit location in the area.
>1s
>0.5
0.5ss
For radio frequency signal penetration through various construction materials, see the chart on page 48.
2
Use a suitable tool to press the
program button on the receiver
for more than 1 second. The
receiver LED will start to flash in
0.5-second intervals.
The flashing of the receiver indicates that it is in program mode
and is ready to receive signals
from any transmitter button
with a selected program.








Step 2 – Complete the Installation Form
- name of the device you want to control (for creating a menu)
- names of units (for correct classification into a group,
e.g. RFSA-61B)
- unit addresses (for actuator identification, e.g. 00150A)
The Installation Form is included at the end of the Manual
Press 2x = set
the “light scene” function
Press 5x = set
the “sunrise” function
3
By pressing the transmitter button repeatedly, save the selected program. The number
of times the button is pressed (1x to 7x) corresponds to each respective function (see the
chart below). Signal transmission is indicated by the flashing transmitter LED.
Name
e.g.RFSA-61B
The receiving actuator confirms the acceptance of the command when its LED goes dark
for a short moment. Step 3 can now be repeated to program the remaining button positions or other transmitters.
Program functions can be set to any transmitter position - wireless wall switch button or
Keychain. Each receiver can be controlled by up to 32 channels (1 channel is represented by
1 button on the wireless wall switch button, keychain or detector). The transmitter may be
connected to more receivers to control an unlimited number of receivers with functions to
which it is programmed and which are within the range of the RF signal.
Address
e.g.00150A
Actuator program selection
Number of pressing
the transmitter
button
Press 1x
Press 2x
Press 3x
Press 4x
Press 5x
Press 6x
Press 7x
Multifunction receivers
Switch
Dimmer
Button
Switch on
Switch off
Impulse relay
Delayed return
Delayed start
Scene 1
Scene 2
Scene 3
Scene 4
Sunrise
Sunset
ON/OFF
Step 3 – Menu setting (create names)
Create the list of controlled device names in Settings / Menu
(Create name).
4
Finish the program mode by pressing the receiver button. The red LED will stop flashing.
Step 4 – Programming
Press and hold the receiver button again for
more than 5 seconds to delete one actuator
from memory. The LED will start to flash in
1-second intervals. Now press the button corresponding the transmitter whose function
you want to delete. Press the receiver program
button to return the actuator to the original
mode.
The programming of RF units with RF Touch is conducted
in Settings / Programming.
47
Use instructions and product dimensions
Radio frequency signal penetration through various construction materials
20-60%
60-90%
wooden structures
with plaster boards
brick walls
0-10%
reinforced concrete
80-90%
metal partitions
common glass
Instructions for use
For correct and faultless functioning and safe operation of the product, it is necessary to observe the following principles:
- Do not install in outdoor or wet spaces
- During maximum load, sufficient cooling must be ensured for RFDA-11B, RFDA-71B and RFDEL-71B
- Do not install RF components into metal switchboard and steel lighting panels (the metal is an obstacle to the RF signal)
- Keep in mind that the radio signal range for RF installations depends on the building structure, materials used and the manner
of unit location in the area.
- Actuator protection: Actuators are equipped with thermal protection which disconnects output when the temperature inside
the device exceeds a certain level.
WARNING!
Inductive and capacitive loads must not be
connected simultaneously!
i
WARNING!
RF Touch and RF Pilot units are only compatible
with actuators designated as OASiS & Touch Compatible!
For more information on product availability
send an e-mail to: [email protected]
Product dimensions
21
15.3
30
6
48
64
19
65
5
90
67.5
45
52
90
67.5
45
3-Module
RFSA-66M
120
17.6
1-Module
RFSG-1M
RFSA-61M
MINI
RFIM-20B
RFIM-40B
RFTI-10B
R1
MINI
RFJA-12B/230V RFDEL-71B
RFDA-11B
RFSA-11B
RFDA-71B
RFSA-61B
13.3
R2
3
60
35
35
Wall switch button design
RFSA-62B
RFSTI-11B
RFDAC-71B
94
24
16
Surface-mounted Wall switch button design
RF Touch-W
RFWB-20/G
RFWB-40/G
RFSTI-11/G
RFTC-10/G
In an installation box
RF Touch-B
RFSTI-11/G
94
1
In an installation box
49
12.6
49
Surface-mounted
RF Touch-W
RFWB-20/G
RFWB-40/G
21
Frame dimensions are given for metal frames, glass, wood, granite
48
80
Product rating capacity
Switching actuators
RFJA-12B; RFSA-62B; RFSA-66M; RFSTI-11/G
Load type
Contact material AgSnO2
Contact 8A
cos φ ≥ 0.95
M
M
AC1
AC2
AC3
AC5a without
compensation
AC5a with compensation
AC5b
AC6a
AC7b
AC12
250V / 8A
250V / 5A
250V / 4A
x
x
250W
250V / 4A
250V / 1A
250V / 1A
M
M
HAL.230V
K
Load type
AC13
AC14
AC15
DC1
DC3
DC5
DC12
DC13
DC14
x
250V / 4A
250V / 3A
30V / 8A
24V /3A
30V / 2A
30V / 8A
30V / 2A
x
M
M
AC5b
AC6a
AC7b
AC12
1000W
x
250V / 3A
x
Contact material AgSnO2
Contact 8A
RFUS-11; RFUS-61
Load type
Contact material AgSnO2
Contact 14A
cos φ ≥ 0.95
HAL.230V
AC1
AC2
AC3
AC5a without
compensation
250V / 14A
250V / 5A
250V / 3A
230V / 3A (690VA)
AC5a with compensation
230V / 3A (690VA)
up to max input C=14uF
M
M
AC13
AC14
AC15
DC1
DC3
DC5
DC12
DC13
DC14
x
250V / 6A
250V / 6A
24V / 10A
24V / 3A
24V / 2A
24V / 6A
24V / 2A
x
K
Load type
Contact material AgSnO2
Contact 14A
RFSA-11B; RFSA-61B; RFSA-61M; RFSTI-11B; RFDAC-71B , RFSC-11, RFSC-61, RFSAI-61B
Load type
Contact material AgSnO2
Contact 16A
M
cos φ ≥ 0.95
M
HAL.230V
energy-saving
AC1
AC2
AC3
AC5a without
compensation
250V / 16A
250V / 5A
250V / 3A
230V / 3A (690VA)
AC5a with compensation
230V / 3A (690VA)
up to max input C=14uF
1000W
M
M
K
Load type
control method
AC5bfluorescent tubesAC6a
AC7b
AC12
x
250V / 3A
250V / 10A
AC13
AC14
AC15
DC1
DC3
DC5
DC12
DC13
DC14
x
250V / 6A
250V / 6A
24V 10A
24V /3A
24V /2A
24V / 6A
24V / 2A
x
Contact material AgSnO2
Contact 16A
Dimming actuators
Loads
L
ESL
C
LED
CATEGORY 2
CATEGORY 3
AUTOMATIC LOAD
DETECTION
R
Standard light
bulbs,
halogen lamps
RFDA-11B




x
x

x
RFDA-71B




x
x

x
RFDEL-71B







x
RFDA-73M/RGB
x
x
x
x
x
x
x

RFDAC-71B
x
x
x
x
x
RFDSC-11







x
RFDSC-71







x
PRODUCT
Low voltage lamps Low voltage lamps
12-24V
12-24V
wound
electric
transformers
transformers
1 x Output 0/1-10 V
Efficient dimmable
fluorescent lamps
CATEGORY 1
Mostly „multiple LED“
illumination sources, power
provided by LINEAR source
limiting current (sharper
dimming), lower price.
Sources that have 1-3 power LEDs,
LED with DC and current
power provided by
regulation. Designed for
SWITCHING the source regulating
dimming
brightness based on the
input voltage (smoother dim- LED chips, LED strips, RGB LED.
ming), higher price GU10 have
a higher body.
49
Wireless solution
solution of
of your
your ELECTRICAL
ELECTRICAL INSTALLATION
INSTALLATION
Wireless
RFJA-12B
230 V
RF TOUCH - Touch control unit
RFSA-11B
RFSTI-11B
RF Touch wireless control unit enables you to control your
entire house from one place. You can switch on/off devices and control window shutters, lights and heating with
a touch of a button. RF Touch automatically manages heating, switches on/off electrical devices and controls window shutters in accordance with a weekly schedule. You
can enter up to 5 programs to run in one day. RF Touch
can control up to 40 actuators and can receive information
from up to 30 detectors.
RF PILOT - Remote Controller with OLED display
RFJA-12B
230 V
RFDA-71B
From the comfort of your house or flat, you can control
lights, set light scenes, control window shutters or open
the garage door.
The Scene mode offers group control of devices so you
can execute more commands with one touch RF Pilot
also informs you about the temperature of the space in
which it is located. RF Pilot is designed to control up to
40 actuators.
RF KEY - Remote Controller
RFJA-12B
24V DC
Thanks to its small dimensions, you can have the RF KEY
always with you. It is designed to control garage doors
or window shutters. It also enables you to control switching, dimming and analog actuators. The number of
controlled actuators is unlimited. The keychain is offered
in two colors (black, white).
To control the garage door and window shutters:
recommended set RF SET JK-Z1: keychain RF Key + RFJA-12B
50
...Your house at one touch
RFWB-40/G - Wireless wall switch button
Thanks to their flat base, wireless wall switch buttons can be
mounted to any surface – wall, wood or glass. The switches
are entirely independent of cable wiring and are powered
by batteries = safe against injuries caused by electric shock.
The switches are available in either the standard plastic,
or the luxury LOGUS90 design.
RFDA-71B
RFJA-12B
230 V
RFSA-61B
To switch lights using a wall switch button with time
functions:
recommended set RF SET-SW-F1: RFWB-40/G + RFSA-61B
RFSA-11B
RFIM-20, RFIM-40 - Universal transmitters
Universal transmitters are designed for mounting under
your existing switch, easily transforming it into a wireless
one. These transmitters do not need an external power
supply (they are battery-powered).
RFIM-40B
To switch lights using a universal transmitter:
recommended set RF SET-SIM2-Z1: RFIM-20B + RFSA-11B
DETECTORS
OASiS detectors may also serve to control household;
the detectors respond to movement, or opening doors
or windows. They allow you, for instance, to switch on
lights by movement or by opening a window.
RFSA-11B
To detect the movement of persons:
recommended set RFSET-S081M-F1: JA - 80P + RFSA-61B
51
ELKO EP Russia
ELKO EP Poland
ELKO EP Germany
ELKO EP
ELKO EP Slovakia
ELKO EP Hungary
ELKO EP Romania
ELKO EP Ukraine
EUROPEAN UNION
EUROPEAN REGIONAL DEVELOPMENT
FUND INVESTMENT IN YOUR FUTURE
ELKO EP, s.r.o.
Palackeho 493 / 769 01 Holesov, Vsetuly / Czech Republic
Phone: + 420 573 514 223 / Fax: +420 573 514 227 / E-mail: [email protected]
Published: 04/2012 / Modifications or amendments reserved/ © Copyright ELKO EP, s.r.o. / 1st edition
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement