2012-01.01.B3

2012-01.01.B3
SystemairCAD version 2012-01.01.B3
Introduction and important information
Web updating of SystemairCAD.........................................
2
Info to Windows 7 users.....................................................
3-4
How to install SystemairCAD..............................................
5
Distributor version with prices ...........................................
5-7
Consultant version without price ........................................
8
What is new in SystemairCAD ...........................................
9 - 12
Warranty conditions for DV and TIME .................................. 13
NOTE: The pricelist is the same as for the last version.
18-03-2013
Page 1
Web updating of SystemairCAD.
The update of SystemairCAD is possibly to do just like other programs.
This means that you don’t have to uninstall and install the program every time we send out
new versions.
If we have made an update of the program you will see the dialog box below.
When you click Yes (Danish “Ja”) the program is automatically updated and ready
to use with the new feature.
As a new thing, you have to choose your market location when you install this
update. With the next update, this will not be necessary.
The only thing we don´t make as web update is price changes
This will always be made via an informational E-mail with a new price database
attached.
18-03-2013
Page 2
Info to Windows 7 users
If you have windows 7 installed on your computer and you don’t have the full rights of the
computer, you might have problems with using the pdf printout.
Then you have to press the
options tab and then select
folders.
This box will appear and now you press this button.
Then you select your
personal folder and
documents in your personal
folder.
Finally you should get a
result that looks a little like
this.
18-03-2013
Page 3
When you are using Windows 7, you might find out that it can be difficult to update
SystemairCAD if you don’t have the administrator rights of your computer.
If this occurs you can try to open and run the program as administrator.
You need to right click on the Systemair logo and then choose run as an administrator – that
should do the job and let you update the programme.
18-03-2013
Page 4
How to install SystemairCAD
SystemairCAD is available in 2 versions, one for distributors and one for consultants.
Distributor version with prices
The version for distributors includes prices and is available for distributors on
www.systemairCAD.dk where a user name and password is needed to access the zip-file for
download.
The user name and password to access the program is issued earlier for all current
distributors. If for some reason you have forgotten the password, you can contact Systemair
Denmark.
After login, the following screen will appear and you should click download to save the zip-file
on your computer.
NOTE: If pop-up window does not appear when you click download, hold down the ctrl button
on your keyboard while clicking download. This will overwrite the build in command to not
allow pop-up windows.
18-03-2013
Page 5
When you have downloaded the zip-file, unzip the downloaded zip-file and install the program.
18-03-2013
Page 6
IMPORTANT: If you want to save your customer database, you should copy it from your
current SystemairCAD folder before installing the new version.
The file is named DnCust.db and can be found here: C:/program
files/systemair/systemaircad or C:/programs/Systemair/systemaircad depending on your local
setup:
After installation of new version, you can place the file in the same folder and overwrite the
empty customer database installed with the new version.
18-03-2013
Page 7
Consultant version without price
The consultant version without price, is available on www.systemair.com, Systemair products,
Download, Software tools and SystemairCAD. Here the users have to register before being
able to access the program.
18-03-2013
Page 8
What is new in SystemairCAD 2012-01.01.B3
1. Topvex units are now Eurovent certified and logo is added.
2. Now possible to export 3D models to Autodesk Revit.
3. Problems with coil calculation in DV Compact solved.
4. DVP section is not divided as default.
5. Control system + electrical heating coil larger than 65 kW.
6. Control system with Russian and Polish language
18-03-2013
Page 9
1. Topvex units are now Eurovent certified and logo is added.
Topvex is now Eurovent certified. The Eurovent logo is added in all the dialogs and the
print out for TOPVEX.
See the logo.
2. Now possible to export 3D models to Autodesk Revit.
Now you can export 3D models to Autodesk Revit.
You will find the REVIT export in the same dialog as the DXF export. You just have to
select “Export Revit file”. The file is exported as an XML file packed in a *.DMR file. The
File has to be imported to REVIT via a small plugin you can download from
www.systemair.com
18-03-2013
Page 10
3. Problems with coil calculation in DV Compact solved.
In the last version we had problems with calculating coils to DV Compact. This was
caused due to an expiration date of the coil program from Friterm.
Now we have a new program from Friterm and the problem is solved.
4. DVP section is not divided as default.
DV units from DV 60 to 150 it is possible to select mixing section divided.
As default it was selected divided in the old version, now this is changed.
5. Control system + electrical heating coil larger than 65 kW.
It has not been possible to calculate an electrical heating coil,
larger than 65 kW, combined with a control system.
Now you can.
18-03-2013
Page 11
6. Control system with Russian and Polish language.
For some time it has not been possible for Russia and Poland to edit control system for
DV units.
When the program was selected with Russian or Polish language, SystemairCAD
crashed when you selected control system. Now it is possible without the program’s
crashing.
18-03-2013
Page 12
Warranty conditions for DV and TIME
Standard warranty:
We deliver according to Orgalime S2000, which includes 1 year warranty.
Extended warranty:
Provided Systemair´s recommended maintenance and service program is followed and
documented, an extended warranty of up to 4 years is granted:
•
Unit casing (panel, frames and corners)
•
•
Control elements (electrical elements)
Heat exchangers, motors, coils and dampers
4 year anti-perforation corrosion
warranty
2 year
2 year
General conditions:
•
Systemair´s recommended maintenance and service program is followed and
documented.
•
Extended warranty only includes delivery of spare parts, but not installation costs.
Start of warranty period is time of delivery given on the order confirmation.
18-03-2013
Page 13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement