R&S®SFU Broadcast Test System

R&S®SFU Broadcast Test System
Data Sheet | 09.00
Broadcasting
Test & Measurement
R&S®SFU
Broadcast Test System
Specifications
Version 09.00, September 2011
CONTENTS
Introduction ..................................................................................................................................................................... 4
Applications overview .............................................................................................................................................................................4
Key features ............................................................................................................................................................................................5
General................................................................................................................................................................................................5
Intuitive, fast and easy operation.........................................................................................................................................................5
Outstanding signal quality ...................................................................................................................................................................5
Unrivaled flexibility for research and development..............................................................................................................................5
Easy remote access ............................................................................................................................................................................5
Specifications.................................................................................................................................................................. 6
RF characteristics ...................................................................................................................................................................................6
Frequency ...........................................................................................................................................................................................6
Frequency sweep ................................................................................................................................................................................6
Reference frequency ...........................................................................................................................................................................6
Level ....................................................................................................................................................................................................7
Spectral purity .....................................................................................................................................................................................8
®
High power (R&S SFU-B90 option) ....................................................................................................................................................8
I/Q modulation.........................................................................................................................................................................................9
I/Q modulator.......................................................................................................................................................................................9
External wideband I/Q .......................................................................................................................................................................10
Internal baseband I/Q ........................................................................................................................................................................10
I/Q output...........................................................................................................................................................................................10
®
Extended I/Q (R&S SFU-K80 option) ...............................................................................................................................................11
Digital baseband ...................................................................................................................................................................................12
Internal test signals ...........................................................................................................................................................................12
MPEG-2 inputs ..................................................................................................................................................................................12
®
ETI input/output (R&S SFU-B11 option) ...........................................................................................................................................12
®
TS generator (R&S SFU-K20 option) ...............................................................................................................................................13
®
DV transport stream libraries (R&S DV-xxxx options) ......................................................................................................................13
®
TS recorder (R&S SFU-K21 option) .................................................................................................................................................14
®
TRP player (R&S SFU-K22 option) ..................................................................................................................................................15
®
Transport stream libraries (R&S SFU-K22x options)........................................................................................................................15
®
Broadcast multiplexer (R&S BCMux)................................................................................................................................................16
Analog baseband ..................................................................................................................................................................................18
Analog video/audio input ...................................................................................................................................................................18
Audio player ......................................................................................................................................................................................18
Internal audio signal generator..........................................................................................................................................................18
®
Internal video signal generator (R&S SFU-K23 option) ....................................................................................................................19
®
Analog video library (R&S ATV-Video option) ..................................................................................................................................20
Digital modulation systems ...................................................................................................................................................................21
Terrestrial standards .........................................................................................................................................................................21
®
DVB-T2 (R&S SFU-K16 option) ....................................................................................................................................................21
®
DVB-T/-H (R&S SFU-K1 option) ...................................................................................................................................................22
®
DVB-SH (R&S SFU-K13 option) ...................................................................................................................................................22
®
T-DMB/DAB/DMB (R&S SFU-K11 option) ....................................................................................................................................23
®
DRM (R&S SFU-K353 option).......................................................................................................................................................23
®
DMB-T (TDS-OFDM, R&S SFU-K7 option) ..................................................................................................................................23
®
DTMB (R&S SFU-K12 option) ......................................................................................................................................................24
®
CMMB (R&S SFU-K15 option)......................................................................................................................................................24
2
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
®
ISDB-T/ISDB-TB/ISDB-TSB (R&S SFU-K6 option).........................................................................................................................25
®
ISDB-Tmm (R&S SFU-K106 option) .............................................................................................................................................25
®
ISDB-Tmm (R&S SFU-K365 option) .............................................................................................................................................25
®
MediaFLO™ (R&S SFU-K10 option) ............................................................................................................................................26
®
ATSC 8VSB (R&S SFU-K4 option) ...............................................................................................................................................26
®
ATSC-M/H (R&S SFU-K18 option) ...............................................................................................................................................27
®
HD Radio™ (R&S SFU-K357 option) ...........................................................................................................................................27
®
ATSC/A-VSB (R&S SFU-K14 option) ...........................................................................................................................................27
Cable standards ................................................................................................................................................................................28
®
DVB-C2 (R&S SFU-K17 option) ...................................................................................................................................................28
®
DVB-C/ISDB-C (R&S SFU-K2 option) ..........................................................................................................................................29
®
J.83/B / DOCSIS (R&S SFU-K5 option)........................................................................................................................................29
®
®
MoCA (R&S SFU-K364 option) ...................................................................................................................................................29
Satellite standards .............................................................................................................................................................................30
®
DVB-SH (R&S SFU-K13 option) ...................................................................................................................................................30
®
DVB-S/DVB-DSNG (R&S SFU-K3 option)....................................................................................................................................30
®
DVB-S2 (R&S SFU-K8 option)......................................................................................................................................................30
®
DIRECTV legacy modulation (R&S SFU-K9 option).....................................................................................................................31
®
AMC (R&S SFU-K108 option).......................................................................................................................................................31
®
ISDB-S (R&S SFU-K362 option)...................................................................................................................................................31
Analog modulation systems ..................................................................................................................................................................32
®
AM/FM/RDS (R&S SFU-K170 option) ..............................................................................................................................................32
®
Standard B/G (R&S SFU-K190 option).............................................................................................................................................34
®
Standard D/K (R&S SFU-K191 option).............................................................................................................................................35
®
Standard I (R&S SFU-K192 option)..................................................................................................................................................35
®
Standard M/N (R&S SFU-K193 option) ............................................................................................................................................36
®
Standard L (R&S SFU-K194 option).................................................................................................................................................36
®
Multi ATV predefined (R&S SFU-K199 option).................................................................................................................................37
Simulation .............................................................................................................................................................................................40
®
Arbitrary waveform generator (R&S SFU-K35 option)......................................................................................................................40
®
Waveform libraries (R&S SFU-K3xx options) ...................................................................................................................................40
®
Interferer management (R&S SFU-K37 option)................................................................................................................................40
®
Multichannel ARB waveforms (R&S SFU-K38 option) .....................................................................................................................41
®
AWGN noise (R&S SFU-K40 option)................................................................................................................................................41
®
Phase noise (R&S SFU-K41 option).................................................................................................................................................42
®
Impulsive noise (R&S SFU-K42 option)............................................................................................................................................45
®
Multinoise use (R&S SFU-K43 option) .............................................................................................................................................45
®
Fading simulator (R&S SFU-B30 option)..........................................................................................................................................46
®
Enhanced fading (R&S SFU-K30 option) .........................................................................................................................................47
®
Gaussian fading (R&S SFU-K32 option) ..........................................................................................................................................48
Analysis.................................................................................................................................................................................................48
®
RF power measurements (R&S SFU-K55 option) ............................................................................................................................48
®
BER measurements (R&S SFU-K60 option) ....................................................................................................................................49
Trigger inputs/outputs ...........................................................................................................................................................................49
Triggers and connections reserved for future use.............................................................................................................................49
General data .........................................................................................................................................................................................50
System data ......................................................................................................................................................................................50
Operating data...................................................................................................................................................................................50
Ordering information .................................................................................................................................................... 51
®
Rohde & Schwarz R&S SFU Broadcast Test System
3
Version 09.00, September 2011
Introduction
®
The R&S SFU broadcast test system has been designed as a platform for different applications and for future options. It provides
multiple instrument functionality in a cabinet of only four height units and offers unrivaled RF and baseband characteristics.
®
Due to its modular design, the R&S SFU can be optimally adapted to the requirements of different applications. It is an ideal research
and development tool for making improvements to introduced standards and for generating new standard signals. Applications that
®
®
previously required many different instruments are now fully covered by the R&S SFU. The modern, intuitive concept of the R&S SFU
ensures fast and easy operation.
Applications overview
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
Broadcast test transmitter with all important digital and analog standards in one box
Wide level range for receiver and chip test applications
Wide range of inputs and outputs for research and development applications
Wide frequency range for limit tests
RF generator and IF generator functionality
Frequency steps of 0.1 Hz and uninterrupted level change for margin tests (PLL, AGC)
Digital noise source with highly precise carrier/noise ratio for channel simulation
Variable noise signal by combining several internal noise sources
Dynamic fading (channel) simulation for testing mobile and multipath reception, diversity simulations
Intelligent interferer management for a variety of sources (ARB, ATV predefined, analog I/Q, digital I/Q)
User-definable signal impairments and signal modifications for research and development
Modifiable standard parameters for research and development
BER measurement on PRBS as well as on MPEG-2 transport streams
Internal transport stream and video generator and special test signals
Internal transport stream and ETI recorder and player for recording and replaying data streams
Internal TRP player for replaying data streams
Multiplexer software for generating streams
Internal arbitrary waveform generator
Use of waveform and data stream libraries
Wide choice of libraries with test waveforms available
Additional software tools
Remote control capability for use in production
Wear-free electronic attenuator
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
Key features
General
•
•
•
•
•
•
Analog TV, digital TV and audio broadcast multistandard test platform
Output frequency from 100 kHz to 3 GHz
Generation of internal noise and interferer signals
Fully digital baseband signal processing
Upgradeability to multifunctional broadcast test system
Easy installation of most options at customer site
Intuitive, fast and easy operation
•
•
•
•
Color display with 1024 × 768 pixel (XVGA format)
Intuitive user interface with Windows XP Embedded
Context-sensitive help system
User-definable favorites for fast access
Outstanding signal quality
•
•
•
•
I/Q modulator with 180 MHz RF bandwidth
Very low SSB phase noise of typ. –135 dBc at 1 GHz (20 kHz carrier offset, 1 Hz measurement bandwidth)
High optional output power of up to +19 dBm (PEP), overrange +26 dBm
High-stability reference oscillator as standard
Unrivaled flexibility for research and development
•
•
•
•
•
•
•
•
•
•
Multistandard platform that supports expansions
Transmission simulations
TS baseband generator and recorder with universal coder for realtime signal generation
TRP baseband player for realtime signal generation
Offline stream multiplexer software
Video generator for realtime signal generation
®
®
®
Arbitrary waveform generator with 1 Gsample, supported by R&S WinIQSIM™, R&S WinIQSIM2™ and R&S ARB toolbox plus
software
Internal hard disk as standard for storing waveforms and modulation data
Wear-free electronic attenuator of up to 3 GHz
Minimum space requirements: signal generator and test transmitter accommodated in one instrument of only four height units
Easy remote access
•
•
•
Remote control via GPIB and LAN
User-friendly remote access by VNC or Remote Desktop
USB connectors for keyboard, mouse and external storage media
®
Rohde & Schwarz R&S SFU Broadcast Test System
5
Version 09.00, September 2011
Specifications
Specifications apply under the following conditions: 30 minutes warm-up time at ambient temperature, specified environmental
conditions met, calibration cycle adhered to and all internal automatic adjustments performed.
“Typical values” are designated with the abbreviation “typ.” These values are verified during the final test but are not assured by
Rohde & Schwarz.
“Nominal values” are design parameters that are not assured by Rohde & Schwarz.
These values are verified during product development but are not specifically tested during production.
RF characteristics
Frequency
Range
underrange
Accuracy
Resolution of setting
Resolution of synthesis
standard, fundamental frequency range
750 MHz to 1500 MHz
300 kHz to 3 GHz
100 kHz to < 300 kHz
depends on reference frequency
0.1 Hz
5 µHz
Frequency sweep
Digital sweep in discrete steps
operating modes
sweep range
step width (lin)
step width (log)
automatic, single shot, manual,
linear or logarithmic
full range
full range
0.01 % to 100 %
Reference frequency
–7
Accuracy
Aging
Temperature effect
Warm-up time
Input for external reference signal
Output for internal reference signal
6
®
after 30 days of uninterrupted operation
in operating temperature range from
0 °C to +50 °C, standard
to nominal thermostat temperature
frequency (approx. sine wave)
maximum deviation
input level
recommended limits
input impedance
connector
frequency (approx. sine wave)
level
source impedance
connector
Rohde & Schwarz R&S SFU Broadcast Test System
< 1 × 10
–9
< 1 × 10 /day
–8
< 6 × 10
≤ 10 min
5 MHz, 10 MHz or 13 MHz
–6
3 × 10
≥ –6 dBm to ≤ 19 dBm
0 dBm to 19 dBm
50 Ω
BNC female, rear
10 MHz or external input frequency
typ. 5 dBm
50 Ω
BNC female, rear
Version 09.00, September 2011
Level
RF output
Maximum level
Setting range
Level accuracy
Additional uncertainty with ALC OFF,
S&H (sample & hold)
Output impedance
VSWR in 50 Ω system
Uninterrupted level setting
Back-feed (from ≥ 50 Ω source)
1
connector
N female, front
output impedance
50 Ω
overvoltage protection
35 V
1
without option
≥ +13 dBm (PEP)
®
with R&S SFU-B90 option (high power)
≥ +19 dBm (PEP)
without option
–120 dBm to +20 dBm
®
with R&S SFU-B90 option (high power)
–120 dBm to +30 dBm
resolution
0.01 dB
“auto” attenuator mode, temperature range +18 °C to +33 °C
f ≤ 3 GHz/level ≥ −100 dBm
< 0.5 dB
(This function is needed only for some
< 0.2 dB
special applications.)
ALC state ON, standard
f ≤ 3 GHz
< 1.6, typ. < 1.4
®
ALC state ON, with R&S SFU-B90 option
“normal” attenuator mode
< 1.8, typ. < 1.6
“high power” attenuator mode
< 1.9, typ. < 1.7
“fixed” attenuator mode, ALC state ON
setting range
> 20 dB
maximum permissible RF power in output 0.5 W
frequency range of RF path
overvoltage protection
maximum permissible DC voltage
35 V
®
with R&S SFU-B90 option (high power)
maximum permissible RF power in output frequency range of RF path
1 MHz < f ≤ 1 GHz
50 W
1 GHz < f ≤ 2 GHz
25 W
2 GHz < f ≤ 3 GHz
10 W
PEP = peak envelope power (CW), for other modulation modes depending on crest factor.
®
Rohde & Schwarz R&S SFU Broadcast Test System
7
Version 09.00, September 2011
Spectral purity
Harmonics
level ≤ 8 dBm, CW
< –30 dBc
®
level ≤ 12 dBm with R&S SFU-B90 option, < –30 dBc
“high power” attenuator mode, CW
level ≥ –50 dBm CW, vector modulation (full-scale input), > 10 kHz carrier offset and
outside the modulation spectrum
0.3 MHz ≤ f ≤ 200 MHz
< –77 dBc
200 MHz < f ≤ 1.5 GHz
< –80 dBc
1.5 GHz < f ≤ 3.0 GHz
< –74 dBc
> 850 kHz carrier offset and outside the modulation spectrum
0.3 MHz ≤ f ≤ 200 MHz
< –77 dBc
200 MHz < f ≤ 1.5 GHz
< –86 dBc
1.5 GHz < f ≤ 3.0 GHz
< –80 dBc
< –70 dBc
caused by power supply unit or
mechanical components, at RF = 1 GHz,
50 Hz to 10 kHz carrier offset
f > 1.5 GHz to 3.0 GHz
< –74 dBc
> 10 MHz carrier offset, 1 Hz CW measurement bandwidth
20 MHz ≤ f ≤ 200 MHz
< –146 dBc
200 MHz < f ≤ 1.5 GHz
< –150 dBc
1.5 GHz < f ≤ 3 GHz
< –148 dBc
vector modulation with full-scale input
I/Q input gain +3 dB
20 MHz ≤ f ≤ 200 MHz
< –143 dBc
200 MHz < f ≤ 1.5 GHz
< –146 dBc
1.5 GHz < f ≤ 3 GHz
< –145 dBc
20 kHz carrier offset, 1 Hz measurement bandwidth
20 MHz ≤ f ≤ 200 MHz
< –128 dBc
f = 1 GHz
< –131 dBc
f = 2 GHz
< –125 dBc
f = 3 GHz
< –121 dBc
RMS value at f = 1 GHz
300 Hz to 3 kHz
< 1 Hz
20 Hz to 23 kHz
< 4 Hz
RMS value 20 Hz to 23 kHz at f = 1 GHz
< 0.02 %
Nonharmonics
Subharmonics
Wideband noise
SSB phase noise
Residual FM
Residual AM
High power (R&S®SFU-B90 option)
Extends the output level
Maximum level
8
19 dBm
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
I/Q modulation
I/Q modulator
Operating modes
Modulation frequency range
I/Q modulation inputs
Static error vector
Modulation frequency response
Carrier leakage
I/Q impairments
I/Q swap
2
I/Q wideband
connector
input impedance
VSWR up to 30 MHz
input voltage for full-scale input
minimum input voltage for ALC state ON
RMS value
f ≤ 200 MHz
f > 200 MHz
peak value
f ≤ 200 MHz
f > 200 MHz
I/Q wideband
up to 50 MHz
up to 5 MHz
without input signal, referenced to
2
full-scale input
I offset, Q offset
setting range
resolution
gain imbalance
setting range
resolution
quadrature offset
setting range
resolution
I and Q signals swapped
external wideband I/Q
internal baseband I/Q
100 MHz
BNC female, front
50 Ω
< 1.2
Vi 2 + Vq2
= 0.5 V
0.1 V
< 0.3 %
< (0.2 % + 0.1 % × f/GHz)
< 0.6 %
< (0.4 % + 0.2 % × f/GHz)
< 3 dB
< 0.6 dB
< –55 dBc
–10 % to +10 %
0.1 %
–10 % to +10 %
0.1 dB
–10° to +10°
0.1°
ON, OFF
Value applies after 1 hour warm-up and recalibration for 4 hours of operation and temperature variations of less than +5 °C.
®
Rohde & Schwarz R&S SFU Broadcast Test System
9
Version 09.00, September 2011
External wideband I/Q
I/Q inputs (I/Q EXT)
(connector equal to I/Q analog IN)
Modulation frequency range
3
Carrier leakage
connector
input impedance
VSWR up to 50 MHz
input voltage for full-scale input
BNC female, front
50 Ω
< 1.2
minimum input voltage for ALC state ON
fast mode
0.1 V
100 MHz
Vi 2 + Vq2
= 0.5 V
without input signal, referenced to
< –55 dBc
4
full-scale input
16QAM, pulse filtering: root raised cosine roll-off, α = 0.15, 10 kHz symbol rate
RMS value
f ≤ 200 MHz
< 0.3 %
f > 200 MHz
< (0.2 % + 0.1 % × f/GHz)
peak value
f ≤ 200 MHz
< 0.6 %
f > 200 MHz
< (0.4 % + 0.2 % × f/GHz)
Static error vector
Internal baseband I/Q
Signal characteristics
D/A converter
see digital modulation systems
data rate
100 MHz
resolution
16 bit
sampling rate
400 MHz (internal interpolation × 4)
Aliasing filter
with amplitude, group delay and Si correction
0.1 dB bandwidth
40 MHz
I/Q impairment
I offset, Q offset
setting range
–10 % to +10 %
resolution
0.1 %
gain imbalance
setting range
–10 % to +10 %
resolution
0.1 dB
quadrature offset
setting range
–10° to +10°
resolution
0.1°
Internal optimization of RF parameters is always ON.
I/Q output
I/Q output
connector
BNC female, rear
output impedance
50 Ω
With RL = 50 Ω, the output voltage depends on the set modulation signal.
output voltage
0.5 V (Vp)
< 1 mV
Offset
3
I/Q wideband ON. This frequency response superimposes all frequency responses specified in the data sheet.
4
Value applies after 1 hour warm-up and recalibration for 4 hours of operation and temperature variations of less than +5 °C.
10
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
Extended I/Q (R&S®SFU-K80 option)
®
®
The R&S SFU-K80 option allows external analog and digital signals to be fed into the baseband signal processing of the R&S SFU.
Input signals can be faded in and noise signals superimposed if the fading simulator and noise options have been installed. In addition,
the digital baseband signals are available externally.
Analog I/Q IN
I/Q analog inputs (I/Q EXT)
(connector equal to I/Q wideband IN)
Digital I/Q IN
I/Q digital input
I/Q digital modulation inputs
Digital I/Q OUT
I/Q digital output
I/Q digital modulation outputs
connector
input impedance
VSWR (up to 25 MHz)
input voltage for full-scale input
BNC female, front
50 Ω
< 1.2
Vi 2 + Vq2
frequency response up to 30 MHz
A/D converter
offset
= 0.5 V
0.5 dB
100 MHz, 14 bit
< –55 dBFS
connector
output level
level
word width
analog bandwidth
symbol rate
Mini D Ribbon, 26 pins, rear
channel link
LVDS
2 × 16 bit
0 Hz to 31 MHz
400 sps to 100 Msps
connector
output level
level
word width
symbol rate
Mini D Ribbon, 26 pins, rear
channel link
LVDS
2 × 16 bit
100 Msps
®
Rohde & Schwarz R&S SFU Broadcast Test System
11
Version 09.00, September 2011
Digital baseband
Internal test signals
MPEG-2 TS packet
MPEG-specific TS packet
DIRECTV TS packet
DIRECTV-specific TS packet
PRBS
header + 184 byte payload
PID
sync byte + 187 byte payload
header + 127 byte payload
130 byte payload
PRBS in line with ITU-T O.151
00 (hex), FF (hex), PRBS (selectable)
NULL (1FFF hex)/variable
00 (hex), FF (hex), PRBS (selectable)
PRBS (DIRECTV only)
PRBS (DIRECTV only)
23
15
2 – 1 / 2 – 1 (selectable)
connector
input level
input impedance
connector
ASI input level
SMPTE 310 input level
input impedance
ASI data rate
SMPTE 310 data rate
ASI, SMPTE 310, SPI
stuffing packets
D-Sub female, 25 pins, front and rear
LVDS
100 Ω, differential
BNC female, front and rear
200 mV to 880 mV
400 mV to 880 mV
75 Ω
270 Mbit/s
19.392658 Mbit/s
ON/OFF
see MPEG-2 TS packet under “Internal
test signals”
BNC female, rear
TTL, sine wave (0 dBm)
50 Ω
packet length, data rate, useful data rate
MPEG-2 inputs
Parallel SPI input
ASI/SMPTE 310 serial input
Stuffing
TS EXT CLK
connector
input level
input impedance
measured values
Indication
ETI input/output (R&S®SFU-B11 option)
®
®
The R&S SFU-B11 option allows external ETI data streams to be fed into the baseband signal processing of the R&S SFU.
T-DMB/DAB signals can be faded in and noise signals superimposed if the fading simulator and noise options have been installed.
ETI input/output
Serial ETI input
Serial ETI output
5
connector
ETI input level
input impedance
ETI data rate
coding
connector
ETI output level
output impedance
ETI data rate
coding
5
Requires coder 2110.3306 with change index > 4.xx and R&S®SFU-B11 model .03 (2110.3887).
12
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with ETI NI
BNC female, rear
0 V to ±2.37 V (ITU-T G.703/G.704)
75 Ω
2048 kbit/s
HDB3
BNC female, rear
0 V to ±2.37 V (ITU-T G.703/G.704)
75 Ω
2048 kbit/s
HDB3
Version 09.00, September 2011
TS generator (R&S®SFU-K20 option)
Serial TS output
Transport stream
mode
connector
output impedance
ASI
output level
data rate
mode
SMPTE 310M
output level
data rate
files
file format
length of transport stream packets
sequence length
data rate
PCR jitter
Signal sets
net data rate
data volume
shape
frequency
amplitude
included
optional
ASI, SMPTE 310M (selectable)
BNC female, rear
75 Ω
800 mV
270 Mbit/s
packet or continuous
800 mV
19.392658 Mbit/s
Rohde & Schwarz data streams
generated transport stream (GTS) format
ATSC: 188/208 bytes (selectable)
DVB: 188/204 bytes (selectable)
generation of endless and seamless
transport streams with repetition of video,
audio and data contents
100 kbit/s to 214 Mbit/s (including null
packets)
max. 90 Mbit/s
max. 80 Mbyte payload
sine wave, rectangle, triangle
1 mHz to 100 kHz
1 µs to 1 ms, in increments of 0.1 µs
moving picture sequences and test
patterns with test tones, for 625 and
525 lines; DVB/ATSC systems
for additional digital signals and
®
broadcasting standards (R&S DV-xxx
options), see ordering information or data
sheet “Stream Libraries for broadcasting
T&M equipment from Rohde & Schwarz”
DV transport stream libraries (R&S®DV-xxxx options)
®
A wide variety of libraries for different digital standards is available as a complement to the R&S SFU-K20 TS generator option. For
more information, see the data sheet “Stream Libraries for broadcasting T&M equipment from Rohde & Schwarz”.
®
Rohde & Schwarz R&S SFU Broadcast Test System
13
Version 09.00, September 2011
TS recorder (R&S®SFU-K21 option)
®
The TS recorder can be used for recording ETI data streams if the ETI input/output (R&S SFU-B11 option) is installed.
Parallel input
mode
connector
input impedance
input level
input clock
Serial TS input
mode
connector
input impedance
ASI
input level
data rate
mode
SMPTE 310M
input level
data rate
mode
TRP
Recording
T10
BIN
data rate
data volume
recording time
Replay
Serial TS output
Serial ETI input/output
14
®
Rohde & Schwarz R&S SFU Broadcast Test System
SPI
D-Sub female, 25 pins, front and rear
100 Ω, differential
LVDS
84.375 kHz to 7.5 MHz (60 Mbit/s NTFS)
84.375 kHz to 11.25 MHz (90 Mbit/s CFS)
ASI, SMPTE 310M, ETI (selectable)
BNC female, front and rear
75 Ω
200 mV to 880 mV
270 Mbit/s
packet or continuous
400 mV to 880 mV
19.392658 Mbit/s
recording via ASI, SPI, SMPTE 310M or
ETI; check of transport stream structure
and packet size (188/204/208);
SPI 8-bit interface: recording of data as a
function of DVALID signal
recording via SPI or ETI; check of
transport stream structure and packet size
(188/204/208); recording of 8-bit data +
DVALID + PSYNC or recording of 10-bit
raw data
recording via SPI; no checking of transport
stream structure; recording of 8-bit data
100 kbit/s to 90 Mbit/s (including null
packets)
max. data volume for recording limited
only by hard disk size
depends on net data rate of incoming
transport stream and on hard disk size
®
see R&S SFU-K22 option
®
see R&S SFU-K22 option
®
see R&S SFU-B11 option
Version 09.00, September 2011
TRP player (R&S®SFU-K22 option)
®
To output ETI data streams to external T-DMB/DAB devices, the R&S SFU-B11 ETI input/output option is required.
Replay
file format
length of transport stream packets
replay time/sequence length
seamless
not seamless
data rate
data volume
Serial TS output
mode
connector
output impedance
ASI
output level
data rate
mode
SMPTE 310M
output level
data rate
Serial ETI output
active
Test signals
stop mode
play mode
Signal set
optional
TRP, T10, BIN, TS, MPG,
DAB, DAB_C, DABP_C, ETI,
FLO, FLO_C, ISDBT_C, MFS, CMMB_C,
ATSC_C
corresponding to externally
applied/recorded transport stream
endless
TRP, MPG, TS
for all other supported file extensions,
replay with cut at transition from end of file
to beginning of file
corresponding to recording data rate and
setting (100 kbit/s to max. 90 Mbit/s) from
hard disk
corresponding to recorded data volume;
limited only by hard disk size
ASI, SMPTE 310M (selectable)
BNC female, rear
75 Ω
800 mV
270 Mbit/s
packet or continuous
800 mV
19.392658 Mbit/s
®
see R&S SFU-B11 option
BIN, ETI, DAB/DAB_C, DABP_C
(ETI format)
head 184 payload, head 187 payload,
head 200 payload, sync 187 payload,
sync 203 payload, sync 207 payload
null packets
payload “00” , payload “FF”,
payload “PRBS 15”, payload “PRBS 23”
for additional digital signals and
®
broadcasting standards (R&S SFU-K2xx
options), see ordering information or data
sheet “Stream Libraries for broadcasting
T&M equipment from Rohde & Schwarz”
Transport stream libraries (R&S®SFU-K22x options)
®
A wide variety of libraries for different digital standards is available as a complement to the R&S SFU-K22 TRP player option. For
more information, see the data sheet “Stream Libraries for broadcasting T&M equipment from Rohde & Schwarz”.
®
Rohde & Schwarz R&S SFU Broadcast Test System
15
Version 09.00, September 2011
Broadcast multiplexer (R&S®BCMux)
®
6
The broadcast multiplexer software is part of the R&S SFU firmware and can also be used on external PCs . The scope of software
®
®
multiplexer applications in the R&S SFU depends on the intended use and requires the R&S SFU-K22 TRP player option and
®
additional R&S SFU-K2xx stream libraries.
Broadcast multiplexer
supported standards
release
Prerequisites
required option
additional options
CMMB
ATSC Mobile DTV
T2-MI
supported streams
Input
Output
multiplexed streams
encryption formats
CMMB software multiplexer
Input stream
file formats
structure
minimum sequence length
included input file
Output stream
file format
structure
minimum data rate
maximum data rate
sequence length
file size
file size limit
loop time
service multiplex
number of PLCH services
service structure
added service content
channel bandwidth
OFDM
PLCH settings
Reed-Solomon
byte interleaver
LDPC
constellation
scrambling mode
CLCH timeslots
SLCH timeslots
6
The PC version of the R&S®BCMux broadcast multiplexer software is in preparation.
16
®
Rohde & Schwarz R&S SFU Broadcast Test System
CMMB, ATSC, ATSC-M/H, DVB-T2 MPLP
1.00
see description of option for details
®
R&S SFU-K22 TRP player
®
R&S SFU-K225 CMMB streams
®
R&S SFU-K226 ATSC Mobile DTV
streams
®
R&S SFU-K227 DVB-T2 MI streams
customer streams and Rohde & Schwarz
streams
encrypted
®
CMMB_C (requires R&S SFU-K225),
®
ATSC_C (requires R&S SFU-K226),
®
T2MI_C (requires R&S SFU-K227)
in line with GY/T 220.1-2006/220.2-2006
®
BIN, MFS, CMMB_C (R&S SFU-K225)
MFS with and without stuffing, PMS
1 s (one valid channel frame)
one file with 10 channel frames in
MFS format
®
CMMB_C (requires R&S SFU-K225)
MFS with stuffing, PMS
100 kbit/s
depends on transmission settings
corresponds to the number of valid
multiplex frames in the input file
depends on data rate and sequence
length
available hard disk capacity
depends on sequence length
0 to 39 (includes one CLCH service)
1 control frame per channel frame and
0 to 38 service frames per channel frame
empty service frames
2 MHz, 8 MHz
1k, 4k (depending on channel bandwidth)
0 (240, 240), 1 (240, 224), 2 (240, 192),
3 (240, 176)
1 to 3
1/2, 3/4
BPSK, QPSK, 16QAM
0 to 7
one, start TS = 0, stop TS = 0
1 to 39, no overlapping of services
Version 09.00, September 2011
T2-MI software multiplexer
Input stream
Output stream
number of input streams
file formats
structure
data rate
file size limit
file format
structure
T2 MI PID
data rate
maximum file size
actual file size
maximum number of PLPs
PLP data source
single PLP in a group
multiple data PLPs in a group
common PLP
PLP mode and stream adaptation
scheduling
PLP type
baseband mode
ISSY
max. buffer size
design delay
null packet deletion
in-band signaling
PLP coding and modulation (BICM)
FEC frame
code rate
constellation
rotation
time interleaver
frame interval (Ijump)
max. number of blocks
framing and OFDM
FFT size
guard interval
extended carrier mode
pilot pattern
bandwidth
T2 frames per superframe (N_T2)
data symbols per T2 frame (L_DATA)
subslices per T2 frame (N_SUB)
T2 system
transmission system
PAPR reduction
T2 version
L1 post modulation
L1 repetition
L1 RF signaling
cell id
network ID
T2 system ID
in line with ETSI TS 102 773
one stream per PLP group
TS, TRP, T2TRP_C
MPEG-2 TS, content files (big TS)
up to 214 Mbit/s, calculated on file
selection
available hard drive capacity
®
T2MI_C (requires R&S SFU-K227)
DVB-T2 modulator interface (T2 MI)
variable
up to 80 Mbit/s, automatic estimation
based on configuration and input data rate
user-defined, limited by available target
drive capacity
adjusted to match T2 frame boundary
16
all services of the selected MPEG-2 TS
selected services extracted from content
files (big TS) input by Annex D splitter
common data extracted by Annex D
splitter
static, dynamic
data type 1, data type 2, common
high efficiency (HEM)
OFF, long
0 bit to 2 Mbit
settable
OFF, ON
OFF, type A, type B
normal (64k), short (16k)
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
QPSK, 16QAM, 64QAM, 256QAM
OFF, ON
settable
settable
settable
1k, 2k, 4k, 8k, 16k and 32k COFDM
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
OFF, ON
PP1, PP2, PP3, PP4, PP5, PP6, PP7,
PP8
1.7/5/6/7/8/10 MHz
settable
settable
settable
SISO
OFF, tone reservation (TR)
settable
BPSK, QPSK, 16QAM, 64QAM
OFF, ON
OFF, ON (single frequency)
settable
settable
settable
®
Rohde & Schwarz R&S SFU Broadcast Test System
17
Version 09.00, September 2011
Analog baseband
Analog video/audio input
If the external video/audio inputs are used, the analog I and Q inputs can no longer be assigned.
®
Video/audio input
Video input
connector
CCVS input level
input impedance
DC restoration
connector
Q input
Audio input
I input
input level
input impedance
included in R&S SFU-K190 to
®
R&S SFU-K194
BNC female, front panel, I input with
®
R&S SFU-Z19 adapter
Vpp = 1 V
75 Ω
clamping of back porch
BNC female, front
®
®
with R&S SFU-K190 to R&S SFU-K194,
®
R&S SFU-K170
®
with R&S SFU-K170
0 dBm
50 Ω
Audio player
Waveform memory
play time
resolution
non-volatile memory
number of signals
bandwidth
level
Audio
frequency response
clock rate
position
Clock generation
Marker
up to 80 s
16 bit for AF1 and 16 bit for AF2
hard disk, USB device
2 channels, AF1 and AF2
DC to 15 kHz
16-bit full scale in each channel,
corresponding to standard deviation
< ±0.3 dB
50 kHz
restart waveform
Internal audio signal generator
Audio signals
number of signals
frequency
level
NICAM signals
fixed sequences
stereo 1
stereo 2
stereo 3
stereo 4
dual 1
dual 2
dual 3
dual 4
mono 1
mono 2
mono 3
mono 4
18
®
Rohde & Schwarz R&S SFU Broadcast Test System
2, can be set separately
30 Hz to 15 kHz, in 1 Hz steps
–60 dB to +12 dB, in 0.01 dB steps,
6 dBu corresponds to standard deviation
AF L: 1 kHz
AF R: 2 kHz
AF L: 1 kHz
AF R: 1 kHz
AF L: 1 kHz
AF R: OFF
AF L: OFF
AF R: 1 kHz
AF L: 2 kHz
AF R: 5 kHz
AF L: 1 kHz
AF R: 1 kHz
AF L: 1 kHz
AF R: OFF
AF L: OFF
AF R: 1 kHz
AF: 1 kHz
AF: 4 kHz
AF: 10 kHz
AF: 100 Hz
Version 09.00, September 2011
Internal video signal generator (R&S®SFU-K23 option)
®
Internal video signal generator
included in R&S SFU-K190 to
®
R&S SFU-K194
COLORBARS_75 (PAL)
COLORBARS_75 (PAL M)
COLORBARS_75 (PAL N)
COLORBARS_75 (NTSC)
COLORBARS_75 (SECAM)
FUBK (PAL)
Video signals
ATV video basic
Insertion test signal structure
PAL – color bar 75 %
in line with country-specific standards
first field
line 16
line 17
line 18
line 19
line 20
line 21
second field
line 319
line 329
line 330
line 331
line 332
line 333
line 334
line 335
first field
line 16
line 17
line 18
second field
line 11
line 12
line 13
line 14
line 15
line 16
line 17
line 18
first field
line 16
line 17
line 18
line 19
line 20
line 21
second field
line 319
line 329
line 330
line 331
line 332
line 333
line 334
line 335
PAL M – color bar 75 %
PAL N – color bar 75 %
2T pulse
CCIR17
CCIR18/1
CCIR18/2
data line
teletext test line
ramp
modulated ramp
CCIR330/5
CCIR331/1
red line
sin(x)/x
15 kHz, 200 ns
250 kHz, 100 ns
2T pulse
NTC7 composite
FCC composite
ramp
modulated ramp
red line
15 kHz, 250 ns
250 kHz, 125 ns
FCC multiburst
NTC7 combined
sin(x)/x
2T pulse
CCIR17
CCIR18/1
CCIR18/2
data line
teletext test line
ramp
modulated ramp
CCIR330/5
CCIR331/1
red line
sin(x)/x
15 kHz, 200 ns
250 kHz, 100 ns
®
Rohde & Schwarz R&S SFU Broadcast Test System
19
Version 09.00, September 2011
NTSC – color bar 75 %
first field
line 16
line 17
line 18
second field
line 11
line 12
line 13
line 14
line 15
line 16
line 17
line 18
first field
lines 7 to 15
line 16
line 17
line 18
line 19
line 20
line 21
second field
line 319
lines 320 to 328
line 329
line 330
line 331
line 332
line 333
line 334
line 335
first field
line 16
line 17
line 18
line 19
line 20
line 21
second field
line 319
line 329
line 330
line 331
line 332
line 333
line 334
line 335
analog video signals
SECAM – color bar 75 %
PAL – FuBK
Additional signals
2T pulse
NTC7 composite
FCC composite
ramp
modulated ramp
red line
15 kHz, 250 ns
250 kHz, 125 ns
FCC multiburst
NTC7 combined
sin(x)/x
discriminating signal
2T pulse
CCIR17
CCIR18/1
CCIR18/2
data line
teletext test line
ramp
discriminating signal
modulated ramp
CCIR330/5
CCIR331/1
red line
sin(x)/x
15 kHz, 200 ns
250 kHz, 100 ns
2T pulse
CCIR17
CCIR18/1
CCIR18/2
data line
teletext test line
ramp
modulated ramp
CCIR330/5
CCIR331/1
red line
sin(x)/x
15 kHz, 200 ns
250 kHz, 100 ns
®
see R&S ATV-Video option
Analog video library (R&S®ATV-Video option)
®
A library with different analog standards is available as a complement to the R&S SFU-K23 analog video generator option. For more
information, see the data sheet “Stream Libraries for broadcasting T&M equipment from Rohde & Schwarz”.
20
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
Digital modulation systems
Terrestrial standards
DVB-T2 (R&S®SFU-K16 option)
DVB-T2
Input
Modulation
Coding
T2 System
Test signals
7
With T2-MI interface switched ON.
8
With internal test signals.
in line with EN 302755
full support (multi PLP)
limited support (only single PLP)
transport stream
interface
format
v1.1.1 and v1.2.1
®
with R&S SFU-B15
®
®
with R&S SFU-B1 and R&S SFU-B10
ASI
T2-MI (single PLP and multi PLP) or
MPEG2-TS (single PLP only)
®
supported with R&S SFU-B15 only
ON/OFF
7
settable
T2 specification check and logging
COFDM
1 (single PLP) to 16 (multi PLP)
T2-MI
interface
PID filter
analyzer
modulation
PLP number
single PLP
®
support
with R&S SFU-B1/-B10/-B15
T2-MI interface
OFF
PLP number
1
single PLP and multi PLP
®
support
with R&S SFU-B15 only
T2-MI interface
ON
PLP number
1 to 16
bandwidth
1.7/5/6/7/8 MHz (overrange 10 MHz)
bandwidth variation
< ±1000 ppm
8
MER
> 40 dB
modulation frequency response
< ±0.2 dB
shoulder attenuation
> 45 dB
8
PLP type
common, data type 1, data type 2
baseband mode
normal (NM), high efficiency (HEM)
FEC frame
normal (64k), short (16k)
code rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
constellation
QPSK, 16QAM, 64QAM, 256QAM
rotation
ON/OFF
9
time interleaver
settable
frame interval (Ijump)
≥1
FFT size
1k, 2k, 4k, 8k, 16k and 32k COFDM
extended carrier mode
ON/OFF
pilot pattern
PP1, PP2, PP3, PP4, PP5, PP6, PP7, PP8
guard interval
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
9
T2 frames per super frame
settable
9
data symbols per T2 frame
settable
10
in-band signaling
according to T2 version
network mode
MFN
transmission system
SISO
11
PAPR reduction
OFF, tone reservation (TR)
9
T2 version
settable
L1 post modulation
BPSK, QPSK, 16QAM, 64QAM
11
L1 repetition
ON/OFF
9
cell ID
settable
9
network ID
settable
9
T2 system ID
settable
TS test packet with settable payload (PRBS, 0x00, 0xFF) (see “Internal test signals”)
9
With T2-MI interface switched OFF.
10
With R&S®SFU-B15 only.
11
PAPR reduction according to T2 version > 1.1.1 not supported yet. Reserved carriers are modulated with 0+j0 only.
®
Rohde & Schwarz R&S SFU Broadcast Test System
21
Version 09.00, September 2011
DVB-T/-H (R&S®SFU-K1 option)
DVB-T/-H
Modulation
mode
bandwidth
MER
modulation frequency response
shoulder attenuation
constellation
Coding
code rate
guard interval
FFT mode
interleaver
TPS
carrier modification
Special functions
scrambler, sync byte inversion,
Reed-Solomon encoder, convolutional
interleaver, bit interleaver, symbol
interleaver, guard interval
Test signals
in line with EN 300744/EN 302304
COFDM
5/6/7/8 MHz (settable for variable
bandwidth: 1 MHz to 10 MHz)
12
> 40 dB
< ±0.2 dB
> 48 dB
QPSK, 16QAM, 64QAM, hierarchical
coding
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
2k, 4k and 8k COFDM
native and in-depth
in line with DVB-T/-H
carriers and carrier groups can be
switched off
can be switched off
TS test packet (see “Internal test signals”)
PRBS before convolutional encoder
PRBS after convolutional encoder
PRBS before mapper
DVB-SH (R&S®SFU-K13 option) 13
DVB-SH
support
mode
control
bandwidth
MER
modulation frequency response
shoulder attenuation
constellation
code rate
Modulation
Coding
guard interval
FFT mode
time interleaver
TPS
Test signals
SH-A in line with EN 302583
®
up to R&S SFU firmware version 2.14
14
CGC (COFDM)
15
manual
1.7/5/6/7/8 MHz
16
> 40 dB
< ±0.2 dB
> 48 dB
QPSK, 16QAM non-hierarchical coding
1/5 (STD ID0), 2/9 (STD ID1),
1/4 (STD ID2), 2/7 (STD ID3),
1/3 (STD ID4), 1/3 (COMP ID5),
2/5 (STD ID6), 2/5 (COMP ID7),
1/2 (STD ID8), 1/2 (COMP ID9),
2/3 (STD ID10), 2/3 (COMP ID11)
1/4, 1/8, 1/16, 1/32
1k, 2k, 4k and 8k COFDM
17
configurable
in line with DVB-SH
TS test packet with settable payload
(PRBS, 0x00, 0xFF) (see “Internal test
signals”)
12
With internal test signals.
13
The R&S®SFU-K13 DVB-SH option is available only on request.
14
SC (TDM) not supported.
15
SH-IP synchronization not supported.
16
With internal test signals.
17
Time interleaver profiles for class 1 and class 2 receivers supported (256 Mbit of interleaving RAM available).
22
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
T-DMB/DAB/DMB (R&S®SFU-K11 option)
T-DMB/DAB/DMB
Transmission
Single-frequency network
Special functions
modulation
mode
bandwidth
modulation frequency response
shoulder attenuation
network mode
control
external ETI data stream
PRBS
Gaussian fading profiles
Test signals
in line with T-DMB/EN 300401,
Korea/Europe/France
COFDM
I, II, III, IV
1.536 MHz
< 0.2 dB
> 45 dB
MFN
MID, manual
®
requires R&S SFU-B11 option
18
can be inserted into a subchannel
®
included; requires R&S SFU-B30 option
mode I, UEP 1, 32 kbit/s
DRM (R&S®SFU-K353 option)
®
The R&S SFU-K353 option is available as a waveform library (non-realtime solution).
DMB-T (TDS-OFDM, R&S®SFU-K7 option) 19
DMB-T (TDS-OFDM)
Modulation
Coding
Special functions
Single-frequency network
support
no support
mode
bandwidth
modulation frequency response
shoulder attenuation
constellation
code rate
guard interval
time interleaver
FFT mode
byte interleaver, randomizer, sync word
randomizer, pilot data, guard interval,
power boost
randomizer restart
network mode
control
Test signals
18
Can be inserted into an existing, user-selectable subchannel of an incoming, valid ETI data stream.
19
The R&S®SFU-K7 DMB-T coder option is available only on request.
in line with TDS-OFDM,
field trials in China
®
®
with R&S SFU-B1 and R&S SFU-B10
®
with R&S SFU-B15
COFDM
6/7/8 MHz (settable for variable
bandwidth: 5.6 MHz to 7.962 MHz)
< 0.2 dB
> 50 dB
QPSK, 16QAM, 64QAM
4/9, 2/3, 8/9
420, 945
48, 240, 720
4k COFDM
can be switched off
packet/frame
MFN
MIP, manual
TS test packet (see “Internal test signals”)
®
Rohde & Schwarz R&S SFU Broadcast Test System
23
Version 09.00, September 2011
DTMB (R&S®SFU-K12 option)
DTMB
support
Modulation
mode
bandwidth
modulation frequency response
shoulder attenuation
constellation
Coding
code rate
guard interval
guard interval PN
time interleaver
FFT mode
pilot carrier
GI power boost
SI power normalization
Co-channel interferer
network mode
RF delay
delay offset
TX address
Special functions
Single-frequency network
Test signals
in line with GB20600-2006
®
®
with R&S SFU-B1, R&S SFU-B10 and
®
R&S SFU-B15
COFDM/single carrier
6/7/8 MHz
< 0.2 dB
> 50 dB
4QAM, 4QAM-NR, 16QAM, 32QAM,
64QAM
0.4, 0.6, 0.8
420, 595, 945
constant/variable (420, 945)
constant (595)
OFF, 240 symbols, 720 symbols
4k COFDM
can be switched off (single carrier)
can be switched off
can be switched on
can be switched on
MFN, SFN (in line with GY/T 229.1-2008)
settable
settable
settable
TS test packet (see “Internal test signals”)
®
CMMB (R&S SFU-K15 option)
CMMB
Modulation
modulation
bandwidth
modulation frequency response
shoulder attenuation
FFT mode
scrambling mode
number of timeslots
services
Reed-Solomon
Coding
byte interleaver
LDPC
constellation
Reed-Solomon, byte interleaver,
bit interleaver, scrambling
CLCH test signal
test signal only
Special functions
Test signals
24
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with GY/T 220.1-2006
COFDM
2 MHz, 8 MHz
< 0.2 dB
> 50 dB
1k, 4k
0 to 7
40
(240, 240)
(240, 224)
(240, 192)
(240, 176)
1 to 3
1/2, 3/4
BPSK, QPSK, 16QAM
can be switched off
15
23
PRBS 2 – 1, PRBS 2 – 1, 0x00, 0xFF
15
23
PRBS 2 – 1, PRBS 2 – 1, 0x00, 0xFF
Version 09.00, September 2011
ISDB-T/ISDB-TB/ISDB-TSB (R&S®SFU-K6 option)
ISDB-T
ISDB-TB
ISDB-TSB
Modulation
Coding
Special functions
in line with ARIB STD-B31 version 1.7
in line with Brazilian standard
in line with ARIB STD-B29
OFDM
6/7/8 MHz
(variable: ±1000 ppm)
mode
bandwidth
number of segments
ARIB STD-B31
ARIB STD-B29
MER
modulation frequency response
shoulder attenuation
FFT mode
number of layers
constellation
code rate
guard interval
time interleaver
ISDB-T
ISDB-TSB
scrambler, Reed-Solomon, byte
interleaver, bit interleaver, frequency
interleaver, guard interval, pilots, OFDM
segments
AC information
Test signals
13
1, 3
> 40 dB
< 0.2 dB
> 48 dB
2k, 4k and 8k
1 to 3
QPSK, DQPSK, 16QAM, 64QAM
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
0, 1, 2, 4, 8, 16
0, 1, 2, 4, 8, 16, 32
can be switched off
PRBS, All 1
TS test packet (see “Internal test signals”)
ISDB-Tmm (R&S®SFU-K106 option)
®
The R&S SFU-K106 option is in preparation as a realtime coder.
ISDB-Tmm (R&S®SFU-K365 option)
®
The R&S SFU-K364 option is in preparation as a waveform library (non-realtime solution).
®
Rohde & Schwarz R&S SFU Broadcast Test System
25
Version 09.00, September 2011
MediaFLO™ (R&S®SFU-K10 option)
MediaFLO™
support
no support
mode
bandwidth
modulation frequency response
shoulder attenuation
IFFT mode
cyclic prefix length
slot to interlace mapping
TDM1
local OIS system parameters
daylight saving time indicator
position of pilot symbols
transmitter position
transmitter offset
Modulation
Coding
Special function
Test signals
in line with TIA-1099 Rev. A
FLO air interface specification (AIS)
Rev. 1.0 and 2.0
®
®
with R&S SFU-B10 and R&S SFU-B15
®
with R&S SFU-B1
COFDM
5/6/7/8 MHz
< 0.2 dB
50 dB
2k, 4k, 8k
1/16, 1/8, 3/16, 1/4
1, 2, 3
can be switched off
can be switched off
can be switched off
can be switched off
can be switched off
can be switched off
PRBS
ATSC 8VSB (R&S®SFU-K4 option)
ATSC 8VSB
Modulation
mode
bandwidth
symbol rate
range
pilot
range
pulse filtering
MER
modulation frequency response
shoulder attenuation
input data rate
randomizer, interleaver
Coding
Special functions
Test signals
20
With internal test signals.
26
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with ATSC Doc. A/53 (8VSB)
8VSB
6 MHz
10.762 Msps
±5 %, settable
1.25 (can be switched off)
settable (from 0 to 5 in steps of 0.001)
root raised cosine roll-off, α = 0.115
20
> 40 dB
< ±0.25 dB
> 45 dB
19.392658 Mbit/s
can be switched off
TS test packet (see “Internal test signals”)
PRBS before convolutional encoder
PRBS after convolutional encoder
PRBS before mapper
Version 09.00, September 2011
ATSC-M/H (R&S®SFU-K18 option)
ATSC Mobile DTV, ATSC-M/H
Modulation
Coding
Special functions
mode
bandwidth
symbol rate
range
pilot
range
pulse filtering
MER
modulation frequency response
shoulder attenuation
input data rate
range
RF-watermark
MTX ID-TR
randomizer, Reed-Solomon, interleaver,
trellis initialization
Test signals
in line with ATSC Doc. A/153
Mobile DTV (USA)
8VSB
6 MHz
10.762 Msps
±5 %, settable
1.25 (can be switched off)
settable (from 0 to 5 in steps of 0.001)
root raised cosine roll-off, α = 0.115
21
> 40 dB
< ±0.25 dB
> 45 dB
19.392658 Mbit/s
±5 % (depends on symbol rate)
supported
supported
can be switched off
TS test packet (see “Internal test signals”)
PRBS before convolutional encoder
PRBS after convolutional encoder
PRBS before mapper
HD Radio™ (R&S®SFU-K357 option)
®
The R&S SFU-K357 option is available as a waveform library (non-realtime solution).
ATSC/A-VSB (R&S®SFU-K14 option) 22
ATSC/A-VSB
Modulation
Coding
Special functions
Test signals
support
mode
bandwidth
symbol rate
range
pilot
range
pulse filtering
MER
modulation frequency response
shoulder attenuation
input data rate
range
SRS modes
turbo stream modes
randomizer, interleaver
21
With internal test signals.
22
The R&S®SFU-K14 ATSC/A-VSB coder option is available only on request.
in line with ATSC
Mobile DTV, field trials in the USA
®
up to R&S SFU firmware version 2.14
8VSB
6 MHz
10.762 Msps
±5 %, settable
1.25 (can be switched off)
settable (from 0 to 5 in steps of 0.001)
root raised cosine roll-off, α = 0.115
> 40 dB
< ±0.25 dB
> 45 dB
19.392658 Mbit/s
±5 % (depends on symbol rate)
0 to 4
0 to 8
can be switched off
TS test packet (see “Internal test signals”)
PRBS before convolutional encoder
PRBS after convolutional encoder
PRBS before mapper
®
Rohde & Schwarz R&S SFU Broadcast Test System
27
Version 09.00, September 2011
Cable standards
DVB-C2 (R&S®SFU-K17 option)
DVB-C2
support
no support
transport stream
interface
format
PLP
number
payload
ID
type
modulation
mode
Input
Modulation
channel raster bandwidth
23
bundled channels
number
bandwidth
MER
modulation frequency response
shoulder attenuation
baseband mode
guard interval
BICM
FEC frame
code rate (concatenated BCH/LDPC)
Coding
data slice
number
ID
packets
tune position
tune offset
FEC frame header type
XFEC frame number
PLP number
time interleaving
23
notch types
C2 system ID
network ID
layer 1 part 2 signaling
time interleaving
code rate (concatenated BCH/LDPC)
mode
C2 system
Test signals
23
In preparation.
24
With internal test signals.
28
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with EN 302769
®
with R&S SFU-B15
®
®
with R&S SFU-B1 and R&S SFU-B10
ASI, SPI
MPEG-2 TS
1 to 4 PLPs
one live and 3 PRBS
settable
normal data PLP
OFDM
16QAM, 64QAM, 256QAM, 1024QAM,
4096QAM
6 MHz, 8 MHz
23
1 and 2 channels
5.71 MHz, 7.61 MHz and
23
23
11.42 MHz , 15.22 MHz
24
> 40 dB
< ±0.2 dB
> 45 dB
normal (NM), high efficiency (HEM)
1/64, 1/128
normal (64k), short (16k)
2/3, 3/4, 4/5, 5/6, 8/9 (short FEC frame),
9/10 (normal FEC frame)
23
1 to 4 data slices
settable
23
type 1 , type 2, stuffing
settable
left, right, settable
robust, high efficiency
(DSlice packets type 2)
1 and 2 (DSlice packets type 2)
1 to 4 PLP
none, 4 symbols, 8 symbols, 16 symbols
narrowband, broadband
settable
settable
none, best fit, 4 symbols, 8 symbols
1/2 (16k LDPC)
16QAM
TS test packet with settable payload
(PRBS ITU-T O.151, 0x00, 0xFF)
(see “Internal test signals”)
Version 09.00, September 2011
DVB-C/ISDB-C (R&S®SFU-K2 option)
DVB-C
ISDB-C
Modulation
mode
symbol rate
pulse filtering
Special functions
MER
modulation frequency response
shoulder attenuation
energy dispersal, Reed-Solomon encoder
(204, 188, t = 8), convolutional interleaver
Test signals
in line with EN 300429 (ITU-T J.83/A)
in line with ITU-T J.83/C
16QAM, 32QAM, 64QAM,
128QAM, 256QAM
0.1 Msps to 8 Msps, settable
root raised cosine roll-off, α = 0.15,
variable roll-off (0.1, 0.13, 0.15, 0.18, 0.20)
> 40 dB
±0.25 dB
> 48 dB
can be switched off
TS test packet (see “Internal test signals”)
PRBS before mapper
J.83/B / DOCSIS (R&S®SFU-K5 option)
J.83/B / DOCSIS
Modulation
Coding
Special functions
in line with ITU-T J.83/B
64QAM, 256QAM, 1024QAM
6 MHz
mode
bandwidth
symbol rate
64QAM
256QAM
1024QAM
pulse filtering
MER
modulation frequency response
shoulder attenuation
64QAM
256QAM
1024QAM
input data rate
64QAM
256QAM
1024QAM
data interleaver
randomizer, Reed-Solomon encoder,
interleaver, checksum
Test signals
5.0569 Msps
5.3600 Msps
5.3600 Msps
root raised cosine roll-off,
α = 0.18 (64QAM),
0.12 (256QAM/1024QAM)
> 40 dB
±0.25 dB
> 50 dB
> 45 dB
> 45 dB
26.97035 Mbit/s
38.81070 Mbit/s
49.02525 Mbit/s
can be switched off, level 1 and level 2
can be switched off
TS test packet (see “Internal test signals”)
PRBS before trellis encoder
PRBS before mapper
MoCA® (R&S®SFU-K364 option)
®
The R&S SFU-K364 option is in preparation as a waveform library (non-realtime solution).
®
Rohde & Schwarz R&S SFU Broadcast Test System
29
Version 09.00, September 2011
Satellite standards
DVB-SH (R&S®SFU-K13 option) 25
See specifications under terrestrial standards.
DVB-S/DVB-DSNG (R&S®SFU-K3 option)
DVB-S/DVB-DSNG
Modulation
mode
symbol rate
overrange
pulse filtering
MER
modulation frequency response
shoulder attenuation
code rate
Coding
Special functions
energy dispersal, Reed-Solomon encoder
(204, 188, t = 8), convolutional interleaver
Test signals
in line with EN 300421/EN 301210
QPSK, 8PSK, 16QAM
0.1 Msps to 45 Msps, settable
> 45 Msps to 66 Msps
root raised cosine roll-off, α = 0.35,
variable roll-off (0.25, 0.30, 0.35, 0.40,
0.45)
38 dB (27.5 Msps)
±0.25 dB
> 45 dB
QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
8PSK: 2/3, 5/6, 8/9
16QAM: 3/4, 7/8
can be switched off
TS test packet (see “Internal test signals”)
PRBS before convolutional encoder
DVB-S2 (R&S®SFU-K8 option)
DVB-S2
support
Modulation
mode
symbol rate
QPSK, 8PSK
16APSK
32APSK
pulse filtering
MER
modulation frequency response
shoulder attenuation
code rate
QPSK
Coding
8PSK
16APSK
32APSK
FEC frame
pilot insertion
error insertion
Special function
Test signals
25
The R&S®SFU-K13 DVB-SH option is available only on request.
30
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with EN 302307, broadcast services
®
®
with R&S SFU-B1, R&S SFU-B10 and
®
R&S SFU-B15
QPSK, 8PSK, 16APSK, 32APSK
1 Msps to 40 Msps (overrange 45 Msps)
2 Msps to 39 Msps
2 Msps to 32 Msps
root raised cosine roll-off, α = 0.20,
variable roll-off (0.15, 0.20, 0.25, 0.35)
38 dB (20 Msps)
±0.25 dB
45 dB
1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 9/10
3/5, 2/3, 3/4, 5/6, 8/9, 9/10
2/3, 3/4, 4/5, 5/6, 8/9, 9/10
3/4, 4/5, 5/6, 8/9, 9/10
normal, 64800 bit; short, 16200 bit
can be switched off
after CRC-8, BCH or LDPC
TS test packet (see “Internal test signals”)
Version 09.00, September 2011
DIRECTV legacy modulation (R&S®SFU-K9 option)
DIRECTV legacy modulation
support
Modulation
Coding
Special function
mode
symbol rate
overrange
pulse filtering
MER
modulation frequency response
shoulder attenuation
code rate
customer-specific DIRECTV streams
error insertion
Test signals
in line with DIRECTV transmission
specifications
®
®
with R&S SFU-B1, R&S SFU-B10 and
®
R&S SFU-B15
QPSK
20 Msps
1 Msps to 30 Msps
root raised cosine roll-off, α = 0.20,
variable roll-off (0.15, 0.20, 0.25, 0.35)
38 dB (20 Msps)
< ±0.25 dB
45 dB
1/2, 2/3, 6/7
can be replayed in 188-byte format,
®
requires R&S SFU-K21 and
®
R&S SFU-K22 options
after convolutional encoder
TS test packet (see “Internal test signals”)
AMC (R&S®SFU-K108 option)
Advanced modulation coding (AMC)
Modulation
support
26
no support
mode
symbol rate
overrange for DIRECTV
pulse filtering
Coding
MER
modulation frequency response
shoulder attenuation
code rate
Special function
phase noise
in line with AMC,
supports DIRECTV as well as parts of
DVB-S and phase noise
®
®
with R&S SFU-B1 and R&S SFU-B10
®
with R&S SFU-B15
QPSK
DVB-S: 1 Msps to 36 Msps (and up to
42 Msps depending on code rate)
DIRECTV: 20 Msps
1 Msps to 30 Msps
root raised cosine roll-off, α = 0.20,
variable roll-off (0.15, 0.20, 0.25, 0.35)
38 dB (20 Msps)
< ±0.25 dB
45 dB
DIRECTV: 1/2, 2/3, 6/7
DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8
can be switched on
ISDB-S (R&S®SFU-K362 option)
®
The R&S SFU-K362 option is available as a waveform library (non-realtime solution).
26
The advanced modulation coding (AMC) functionality on the R&S®SFU-B15 is available with the following options: R&S®SFU-K3 (DVB-S coder),
R&S®SFU-K9 (DIRECTV coder) and R&S®SFU-K41 (phase noise).
®
Rohde & Schwarz R&S SFU Broadcast Test System
31
Version 09.00, September 2011
Analog modulation systems
AM/FM/RDS (R&S®SFU-K170 option)
FM
FM operating modes
audio signals
internal audio signal generator
external audio input
AF frequency range
AF frequency response
attenuation at 19 kHz
preemphasis
residual AM
FM stereo
stereo operating modes
MPX frequency deviation
deviation
resolution
stereo crosstalk attenuation
27
total harmonic distortion
28
SNR (stereo/RDS signal)
ITU-R weighted (quasi-peak)
ITU-R unweighted (RMS)
pilot tone
frequency
deviation
resolution
phase
resolution
RDS
subcarrier frequency
deviation
resolution
mono frequency deviation
deviation
resolution
29
total harmonic distortion
FM mono
AM
audio signals
internal audio signal generator
external audio input
AF frequency range
AF frequency response
attenuation at 3.15 kHz
modulation
modulation depth
resolution
AM total harmonic distortion
m = 30 %
m = 80 %
stereo, mono
see audio generator
see analog audio input
30 Hz to 15 kHz
< 0.2 dB
> 70 dB
OFF, 50 µs, 75 µs
< 0.1 %
(at AF = 1 kHz, ±50 kHz deviation)
L, R, L = R, L = –R, L ≠ R
internal RDS signal generation, MPX and
RDS signals can be generated
simultaneously
0 Hz to ±100 kHz
10 Hz
> 50 dB (at AF = 30 Hz to 15 kHz)
< 0.1 % (at 60 kHz audio frequency
deviation, AF = 1 kHz)
at ±40 kHz audio frequency deviation
> 64 dB
> 70 dB
19 kHz ± 1 Hz
0 Hz to ±15 kHz
10 Hz
0º to ±180º
0.1º
57 kHz ± 3 Hz
0 Hz to ±10 kHz
10 Hz
0 Hz to ±100 kHz
10 Hz
< 0.1 % (at ±67.5 kHz audio frequency
deviation, AF = 1 kHz)
see audio generator
30 Hz to 2.25 kHz
< 0.2 dB
> 35 dB
0 % to 100 %
1%
at AF = 1 kHz
< 0.2 %
< 0.2 %
27
Generator and receiver without preemphasis/deemphasis.
28
Generator without preemphasis, receiver with deemphasis, and left/right input signal source set to audio generator.
29
Generator and receiver without preemphasis/deemphasis.
32
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
®
RDS/RDBS
RDS
RBDS (United States RBDS standard)
Group
Programs
Traffic programs/announcements
Music speech
Decoder identification (DI)
Clock time
Radio text
Alternative frequencies, method A
Alternative frequencies, method B
Enhanced other network (EON)
Traffic message channel (TMC)
group sequence
program identification (PI)
program service name (PS)
program type code (PTY)
program type name (PTYN)
traffic program (TP)
traffic announcement (TA)
music speech (MS)
dynamic PTY
compressed PTY
artificial head
stereo
clock time and date clock time
offset
input line
number
frequency range
resolution
number
tuning frequency
frequency range
resolution
frequencies per list
frequency range
resolution
order per frequency
program identification (PI)
program service name (PS)
traffic program (TP)
traffic announcement (TA)
linkage actuator (LA)
extended generic (EG) indicator
international linkage set (ILS) indicator
program type code (PTY)
program identification number (PIN)
alternative frequency
number of frequencies
mapped frequencies
tuning frequency
frequency range
resolution
traffic message channel (TMC)
group 3A variant 00 (block 3)
group 3A variant 01 (block 3)
number of 8A groups
group 8A block 2
group 8A block 3
group 8A block 3
included in R&S SFU-K170 AM/FM
RDS coder
in line with IEC 62106/DIN EN 62106
in line with NRSC-4-A
up to 38 groups
0000 to FFFF hex
up to 8 characters
0 to 31 decimals
up to 8 characters
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
information from system time
up to +99 hours and 59 minutes
up to 64 characters
up to 25 frequencies
87.6 MHz to 107.9 MHz
in steps of 100 kHz
up to 5 frequency lists
one per list
87.6 MHz to 107.9 MHz
in steps of 100 kHz
up to 25 frequencies
87.6 MHz to 107.9 MHz
in steps of 100 kHz
ascending or descending
0000 to FFFF hex
up to 8 characters
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF, 0000 to FFFF hex
0 to 31 decimals
0000 to FFFF hex
method A
up to 25 frequencies
up to 4 frequencies
one
87.6 MHz to 107.9 MHz
in steps of 100 kHz
ON/OFF
0000 to FFFF hex
0000 to FFFF hex
up to 6
00 to 1F hex
0000 to FFFF hex
0000 to FFFF hex
®
Rohde & Schwarz R&S SFU Broadcast Test System
33
Version 09.00, September 2011
Open format
open format
group 1A block 2/block 3/block 4
group 1B block 2/block 3/block 4
group 3A block 2/block 3/block 4
group 3B block 2/block 3/block 4
group 4B block 2/block 3/block 4
group 5A block 2/block 3/block 4
group 5B block 2/block 3/block 4
group 6A block 2/block 3/block 4
group 6B block 2/block 3/block 4
group 7A block 2/block 3/block 4
group 7B block 2/block 3/block 4
group 8A block 2/block 3/block 4
group 8B block 2/block 3/block 4
group 9A block 2/block 3/block 4
group 9B block 2/block 3/block 4
group 10A block 2/block 3/block 4
group 10B block 2/block 3/block 4
group 11A block 2/block 3/block 4
group 11B block 2/block 3/block 4
group 12A block 2/block 3/block 4
group 12B block 2/block 3/block 4
group 13A block 2/block 3/block 4
group 13B block 2/block 3/block 4
group 15A block 2/block 3/block 4
ON/OFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
30
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
31
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
00 to 1F/ – /0000 to FFFF
00 to 1F/0000 to FFFF/0000 to FFFF
Standard B/G (R&S®SFU-K190 option)
Standard B/G
Vision modulation
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
residual carrier
S/N ratio
video
mode
Sound modulation
modulation of sound carriers 1, 2
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
pilot tone
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
audio player
Video signals
Audio signals
30
Visible if TMC = OFF; available with R&S®SFU V2.20 and R&S®SFU V1.50 software or later.
31
Visible if TMC = OFF; available with R&S®SFU V2.20 and R&S®SFU V1.50 software or later.
34
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with country-specific standard
B/G
CCIR – B/G Germany general half,
B/G Australia (can be switched off)
< 20 ns (with/without vestigial sideband
filtering)
B/G, can be switched off
< 0.5 dB (–0.6 MHz to +4.8 MHz)
(with/without vestigial sideband filtering)
0 % to 30 %, settable in 0.1 % steps
> 60 dB, weighted
mono, stereo, dual sound,
mono/NICAM, NICAM
FM
30 kHz (settable)
50 µs/75 µs (can be switched off)
5.5 MHz/5.74 MHz (settable)
13 dB/20 dB (settable)
in sound carrier 2 (can be switched off)
> 60 dB, weighted (CCIR)
®
see R&S SFU-K23 option
see video input
see audio generator
see audio input
see audio player
Version 09.00, September 2011
Standard D/K (R&S®SFU-K191 option)
Standard D/K
Vision modulation
in line with country-specific standard
D/K
modulation
group delay
precorrection
frequency response
OIRT – D/K half (can be switched off)
< 20 ns (with/without vestigial sideband
filtering)
vestigial sideband
filtering
amplitude frequency response
Sound modulation
Video signals
Audio signals
residual carrier
S/N ratio
video
mode
DK, DK FM2, DK NICAM,
can be switched off
< 0.5 dB (–1 MHz to +5.8 MHz)
(with/without vestigial sideband filtering)
0 % to 30 %, settable in 0.1 % steps
> 60 dB, weighted
mono, stereo, dual sound, NICAM,
mono/NICAM
modulation of sound carriers 1, 2
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
pilot tone
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
audio player
FM
30 kHz (settable)
50 µs/75 µs (can be switched off)
6.5 MHz/6.74 MHz (settable)
13 dB/20 dB (settable)
in sound carrier 2 (can be switched off)
> 60 dB, weighted (CCIR)
®
see R&S SFU-K23 option
see video input
see audio generator
see audio input
see audio player
Standard I (R&S®SFU-K192 option)
Standard I
Vision modulation
in line with country-specific standard
I
modulation
group delay
precorrection
frequency response
UK – I (can be switched off)
< 20 ns (with/without vestigial sideband
filtering)
vestigial sideband
filtering
amplitude frequency response
Sound modulation
Video signals
Audio signals
residual carrier
S/N ratio
video
mode
modulation of sound carrier 1
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
modulation of sound carrier 2
modulation mode
vision/sound carrier frequency spacing
vision/sound carrier level spacing
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
audio player
I, I1, can be switched off
< 0.5 dB (–1 MHz to +4.8 MHz)
(with/without vestigial sideband filtering)
0 % to 30 %, settable in 0.1 % steps
> 60 dB, weighted
mono, mono/NICAM, NICAM
FM
30 kHz (settable)
50 µs/75 µs (can be switched off)
6 MHz (settable)
13 dB (settable)
NICAM
6.552 MHz (settable)
20 dB (settable)
> 60 dB, weighted (CCIR)
®
see R&S SFU-K23 option
see video input
see audio generator
see audio input
see audio player
®
Rohde & Schwarz R&S SFU Broadcast Test System
35
Version 09.00, September 2011
Standard M/N (R&S®SFU-K193 option)
Standard M/N
Vision modulation
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
residual carrier
S/N ratio
video
mode
Sound modulation
modulation of sound carriers 1, 2
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
pilot
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
audio player
Video signals
Audio signals
in line with country-specific standard
M/N
FCC – M/N (can be switched off)
< 20 ns (with/without vestigial sideband
filtering)
M, N, can be switched off
< 0.5 dB (–0.6 MHz to +4 MHz)
(with/without vestigial sideband filtering)
0 % to 30 %, settable in 0.1 % steps
> 60 dB, weighted
BTSC mono, stereo Korea, dual sound
Korea
FM
25 kHz (settable)
50 µs/75 µs (can be switched off)
4.5 MHz/4.742 MHz (settable)
13 dB/20 dB (settable)
in sound carrier 2 (can be switched off)
> 60 dB, weighted (CCIR)
®
see R&S SFU-K23 option
see video input
see audio generator
see audio input
see audio player
Standard L (R&S®SFU-K194 option)
Standard L
Vision modulation
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
residual carrier
mode
modulation of sound carrier 1
modulation mode
vision/sound carrier frequency spacing
vision/sound carrier level spacing
modulation of sound carrier 2
modulation mode
frequency deviation
vision/sound carrier frequency spacing
vision/sound carrier level spacing
internal video generator
external video input
internal audio generator
external audio input
audio player
Sound modulation
Video signals
Audio signals
36
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with country-specific standard
L
TDF – L (can be switched off)
< 20 ns (with/without vestigial sideband
filtering)
L, L NICAM, can be switched off
< 0.5 dB (–1 MHz to +5.8 MHz)
(with/without vestigial sideband filtering)
0 % to 30 %, settable in 0.1 % steps
AM mono, mono/NICAM, NICAM
NICAM
5.85 MHz (settable)
27 dB (settable)
AM
54 % modulation depth (settable)
6.5 MHz (settable)
10 dB (settable)
®
see R&S SFU-K23 option
see video input
see audio generator
see audio input
see audio player
Version 09.00, September 2011
Multi ATV predefined (R&S®SFU-K199 option)
Multi ATV predefined
Modulation
Standard PAL B/G
Standard PAL B/G + NICAM
Standard PAL I
Standard PAL I1
Standard PAL D/K
32
standards
signals
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
left
right
group delay precorrection
residual carrier
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
sound 1
group delay precorrection
residual carrier
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
sound 1
group delay precorrection
residual carrier
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
sound 1
group delay precorrection
residual carrier
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
left
right
group delay precorrection
residual carrier
in line with country-specific standards and
MBRAI
B/G, B/G N, I, I1, D/K, D1,
D CHINA, M/N, L
one defined ATV signal per standard
in line with MBRAI PAL B/G with A2
PAL, color bar 75 %
see below
FM 50 kHz deviation, 5.5 MHz, 13 dB
FM 50 kHz deviation, 5.742 MHz, 20 dB
stereo
1 kHz
1 kHz
CCIR B/G Germany
10 %
in line with MBRAI PAL B/G with NICAM
PAL, color bar 75 %
see below
FM 50 kHz deviation, 5.5 MHz, 13 dB
32
NICAM roll-off = 40 %, 5.85 MHz, 20 dB
mono
1 kHz
CCIR B/G Germany
10 %
PAL, color bar 75 %
see below
FM 50 kHz deviation, 6.0 MHz, 13 dB
32
NICAM
roll-off = 100 %, 6.552 MHz, 20 dB
mono
1 kHz
none
20 %
in line with MBRAI PAL I1
PAL, color bar 75 %
see below
FM 50 kHz deviation, 6.0 MHz, 13 dB
32
NICAM
roll-off = 100 %, 6.552 MHz, 20 dB
mono
1 kHz
none
20 %
PAL, FuBK
see below
FM 50 kHz deviation, 6.5 MHz, 13 dB
FM 50 kHz deviation, 6.74 MHz, 20 dB
stereo
1 kHz
1 kHz
flat
12.5 %
Simulation of NICAM spectrum by means of PN sequence and appropriate pulse shaping.
®
Rohde & Schwarz R&S SFU Broadcast Test System
37
Version 09.00, September 2011
Standard PAL D1
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
sound 1
group delay precorrection
residual carrier
video test signal
insertion test signal structure
sound subcarrier
sound 1
audio coding
sound 1
group delay precorrection
residual carrier
video test signal
insertion test signal structure
sound subcarrier
audio coding
sound 1
group delay precorrection
residual carrier
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
Standard PAL D CHINA
Standard M/N
Standard SECAM L
audio coding
sound 1
sound 2
group delay precorrection
residual carrier
33
Simulation of NICAM spectrum by means of PN sequence and appropriate pulse shaping.
38
®
Rohde & Schwarz R&S SFU Broadcast Test System
in line with MBRAI PAL D1
PAL, color bar 75 %
see below
FM 50 kHz deviation, 6.5 MHz, 13 dB
33
NICAM roll-off = 40 %, 5.85 MHz, 20 dB
mono
1 kHz
half, OIRT
12.5 %
PAL, color bar 75 %
see below
FM 50 kHz deviation, 6.5 MHz, 10 dB
mono
1 kHz
half, OIRT
12.5 %
NTSC, SMPTE color bar with PLUGE
see below
FM 25 kHz deviation, 4.5 MHz, 7 dB
mono
400 Hz
5 MHz/FCC
12.5 %
in line with MBRAI SECAM L
SECAM, color bar 75 %
see below
33
NICAM roll-off = 40 %, 5.85 MHz, 27 dB
AM modulation depth = 54 %, 6.5 MHz,
10 dB
mono
1 kHz
full, TDF
3%
Version 09.00, September 2011
Insertion test signal structure in line with country-specific standards
Standards B/G, B/G N, I, I1, D/K, D1,
first field
D CHINA and
lines 8, 10
IEC 62002 with
line 16
2 CH. PAL B (MBRAI)
lines 17, 18
2 CH. PAL G (MBRAI)
line 19
2 CH. PAL B N (MBRAI)
lines 20, 21
2 CH. PAL G N (MBRAI)
second field
2 CH. PAL I1 (MBRAI)
line 323
2 CH. PAL D1 (MBRAI)
line 329
DVB-T + PAL B (MBRAI)
lines 330, 331
DVB-T + PAL G (MBRAI)
line 332
DVB-T + PAL B N (MBRAI)
line 333
DVB-T + PAL G N (MBRAI)
lines 334, 335
DVB-T + PAL I1 (MBRAI)
DVB-T + PAL D1 (MBRAI)
Standard M/N
first field
line 17
line 18
second field
line 17
line 18
Standard L and
first field
IEC 62002 with
lines 7 to 14
DVB-T + SECAM L (MBRAI)
line 15
2 CH. SECAM L (MBRAI)
line 17
line 18
second field
lines 320 to 328
line 330
lines 331, 332
line 333
MBRAI signal combinations
Signal combinations
Digital/analog multi-interferer
pattern L1
digital N+2/analog N+4 signal
Analog multi-interferer
pattern L2
2 analog N+2/N+4 signals
2T pulse
data line 1
CCIR17
CCIR18/2
teletext test line
teletext test line
data line 2
CCIR330/5
CCIR331/1
sin(x)/x
teletext test line
NTC7 composite
FCC composite
NTC7 combined
sin(x)/x
discriminating signal
teletext test line
CCIR17
CCIR18, 6 multiburst packets
discriminating signal
CCIR330
CCIR331
CCIR331/1
in line with IEC 62002 (MBRAI)
DVB-T + PAL B (MBRAI)
DVB-T + PAL G (MBRAI)
DVB-T + PAL B N (MBRAI)
DVB-T + PAL G N (MBRAI)
DVB-T + PAL I1 (MBRAI)
DVB-T + PAL D1 (MBRAI)
DVB-T + SECAM L (MBRAI)
2 CH. PAL B (MBRAI)
2 CH. PAL G (MBRAI)
2 CH. PAL B N (MBRAI)
2 CH. PAL G N (MBRAI)
2 CH. PAL I1 (MBRAI)
2 CH. PAL D1 (MBRAI)
2 CH. SECAM L (MBRAI)
®
Rohde & Schwarz R&S SFU Broadcast Test System
39
Version 09.00, September 2011
Simulation
Arbitrary waveform generator (R&S®SFU-K35 option)
Waveform memory
length
resolution
loading time for 10 Msample
non-volatile memory
clock rate
accuracy
operating mode
frequency accuracy (internal)
bandwidth
with clock rate = 100 MHz
(no interpolation), bandwidth 0.1 dB
with clock rate < 100 MHz,
bandwidth –0.1 dB
sampling rate
Clock generation
Interpolation
Trigger
operating mode
source
delay
inhibit
position
delay
Marker
Special function
software support
Signal sets
optional
34
512 sample to 1 Gsample
in one-sample steps
2 × 16 bit
3s
hard disk
400 Hz to 100 MHz
0.001 Hz
internal
accuracy of reference frequency
40 MHz
0.31 × clock rate
automatically interpolated to the internal
100 MHz data rate
auto, retrigger, armed auto,
armed retrigger
internal, external
32
settable from 0 to 2 – 1 samples
32
settable from 0 to 2 – 1 samples
restart waveform
settable from 0 to waveform length in
samples
®
35
R&S WinIQSIM™
®
R&S SMU-K15 custom OFDM
for additional digital signals and
®
broadcasting standards (R&S SFU-K3xx
options), see ordering information or data
sheet “Waveform Libraries and Tools for
broadcasting T&M equipment from
Rohde & Schwarz”
Waveform libraries (R&S®SFU-K3xx options)
A wide variety of waveform libraries for different standards and interference scenarios is available as a complement to the
®
R&S SFU-K35 ARB generator option. For more information, see the data sheet “Waveform Libraries and Tools for broadcasting T&M
equipment from Rohde & Schwarz ”.
Interferer management (R&S®SFU-K37 option)
Interferer
mode
bandwidth
level setting range
frequency offset
points for adding interferer signals
Signal set
ARB, ATV predefined, analog I/Q,
digital I/Q
< ±40 MHz (referenced to useful signal)
–60 dB to +60 dB
36
(relative to useful signal)
–40 MHz to +40 MHz
(relative to useful signal frequency)
before noise addition/after noise addition
activated options, waveforms and
interferers, customer-specific waveforms
34
Waveform memory size and supported length depend on the installed R&S®SFU-B3 memory extension.
35
With R&S®WinIQSIMTM: Software version 4.24 or later supports the download of I/Q data and the control of the R&S®SFU-K35.
36
High interferer power is at the expense of diminished useful signal values.
40
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
Multichannel ARB waveforms (R&S®SFU-K38 option)
Multichannel ARB waveforms
software support
37
features
Signal set
input files
®
R&S ARB toolbox plus
generating, manipulating, resampling,
importing and flexible combining of
waveforms
activated options, waveforms and
interferers, customer waveforms
encrypted waveforms (related waveform
library option is required for play out)
output files
AWGN noise (R&S®SFU-K40 option)
RF bandwidth
Noise
C/N
System bandwidth (bandwidth for
calculating the noise power)
37
3 dB spectrum (AWGN)
density distribution function
crest factor
setting range
resolution
uncertainty for system bandwidth =
symbol rate and C/N < 20 dB
range
> 96 MHz
Gaussian, statistical, separate for I and Q
18 dB
–30 dB to +60 dB
0.1 dB
< 0.2 dB
100 kHz to 80 MHz
For detailed information, please refer to the R&S®ARB toolbox plus.
®
Rohde & Schwarz R&S SFU Broadcast Test System
41
Version 09.00, September 2011
Phase noise (R&S®SFU-K41 option)
Phase noise
frequency response
amplitude at fcarrier ± 100 Hz
setting range
resolution
max. phase angle
density distribution function
sampling rate
phase noise masks
format
System bandwidth
Profile files
Special function
PLL phase noise masks
PLL 1
–10.0 dBc (1 Hz) to –110.0 dBc (1 Hz),
depending on selected profile
0.1 dB
±180°
Gaussian
10 MHz
predefined files
text files, editable
customer-specific files can be used
simulation of typ. PLL circuits
PLL 2
VCXO phase noise masks
Crystal 1
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–18.5 dBc (1 Hz)
–30.2 dBc (1 Hz)
–44.5 dBc (1 Hz)
–56.5 dBc (1 Hz)
–77.8 dBc (1 Hz)
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–22.4 dBc (1 Hz)
–32.0 dBc (1 Hz)
–43.5 dBc (1 Hz)
–83.5 dBc (1 Hz)
–99.4 dBc (1 Hz)
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–12.9 dBc (1 Hz)
–15.4 dBc (1 Hz)
–38.6 dBc (1 Hz)
–59.7 dBc (1 Hz)
–79.3 dBc (1 Hz)
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–13.2 dBc (1 Hz)
–16.1 dBc (1 Hz)
–40.3 dBc (1 Hz)
–61.5 dBc (1 Hz)
–80.7 dBc (1 Hz)
simulation of typ. oscillator circuits
Crystal 2
42
selection from profile files
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
Crystal 3
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–22.3 dBc (1 Hz)
–24.9 dBc (1 Hz)
–50.9 dBc (1 Hz)
–66.6 dBc (1 Hz)
–72.6 dBc (1 Hz)
Crystal 4
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–22.3 dBc (1 Hz)
–31.1 dBc (1 Hz)
–61.6 dBc (1 Hz)
–59.5 dBc (1 Hz)
–105.8 dBc (1 Hz)
Crystal 5
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–22.5 dBc (1 Hz)
–23.1 dBc (1 Hz)
–41.2 dBc (1 Hz)
–78.8 dBc (1 Hz)
–98.2 dBc (1 Hz)
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–20.1 dBc (1 Hz)
–22.6 dBc (1 Hz)
–45.6 dBc (1 Hz)
–66.7 dBc (1 Hz)
–86.4 dBc (1 Hz)
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–20.1 dBc (1 Hz)
–22.8 dBc (1 Hz)
–46.9 dBc (1 Hz)
–68.2 dBc (1 Hz)
–87.5 dBc (1 Hz)
DVB-S2 phase noise masks
DVB-S2 P1
based on EN 302307, DIRECTV
DVB-S2 P2
Phasenoise shape of DVB-S2 P2.fcf
0
Phase Noise / dBc/Hz
–20
–20.0775 dBc/Hz
–22.8447 dBc/Hz
–46.9444 dBc/Hz
–40
–60
–68.2321 dBc/Hz
–87.4883 dBc/Hz
–80
–100
–120
10
100
1k
10 k
f / Hz
100 k
1M
10 M
®
Rohde & Schwarz R&S SFU Broadcast Test System
43
Version 09.00, September 2011
DVB-S2 D1
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–12.5 dBc (1 Hz)
–24.0 dBc (1 Hz)
–48.0 dBc (1 Hz)
–65.5 dBc (1 Hz)
–73.8 dBc (1 Hz)
DVB-S2 A1
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–18.6 dBc (1 Hz)
–44.2 dBc (1 Hz)
–66.35 dBc (1 Hz)
–86.0 dBc (1 Hz)
–97.5 dBc (1 Hz)
DVB-S2 A2
frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
max. phase noise
–20.0 dBc (1 Hz)
–45.4 dBc (1 Hz)
–67.7 dBc (1 Hz)
–79.3 dBc (1 Hz)
–93.8 dBc (1 Hz)
frequency
100 Hz
1 kHz
10 kHz
20 kHz
100 kHz
1 MHz
max. phase noise
–33.8 dBc (1 Hz)
–48.7 dBc (1 Hz)
–68.6 dBc (1 Hz)
–74.6 dBc (1 Hz)
–88.8 dBc (1 Hz)
–120.1 dBc (1 Hz)
ATSC phase noise masks
ATSC A.74
based on ATSC A.74
Special function
44
user-specific files can be used
®
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
Impulsive noise (R&S®SFU-K42 option)
Pulsed addition of an AWGN signal to the useful signal with settable number of pulses per frame and within settable limits of randomly
distributed pulse intervals.
AWGN signal (not pulsed)
Pulse generator
Frame
Pulse
Pulses per frame
Minimum pulse interval
Maximum pulse interval
Distribution of pulse intervals
®
data
see R&S SFU-K40 option
duration
duration
setting range
for number of pulses > 1
setting range
resolution
for number of pulses > 1
setting range
resolution
function
10 ms, 100 ms, 1000 ms
0.25 µs, fixed
1 to 40000
0.25 µs to 16 ms
0.25 µs
0.25 µs to 16 ms
0.25 µs
PRBS
Multinoise use (R&S®SFU-K43 option)
Selectable noise sources can be combined to form a cumulative noise signal, which is then added to the useful signal. The C/N and
®
level can be set for the overall signal. R&S SFU broadcast test systems delivered before May 2006 require a hardware
38
extension.
Signal sources
Cumulative signal
C/N setting for cumulative signal
38
AWGN noise
phase noise
impulsive noise
signal sources that can be combined
AWGN noise
phase noise
impulsive noise
setting range
resolution
uncertainty for system bandwidth = symbol
rate and C/N < 20 dB
®
see R&S SFU-K40 option
®
see R&S SFU-K41 option
®
see R&S SFU-K42 option
depending on options installed
addition can be activated
addition can be activated
addition can be activated
–30 dB to +60 dB
0.1 dB
< 0.2 dB
Check in SETUP -> HARDWARE INFO. Status of installed hardware extension: D/A converter board 2110.3406 model .03 required.
®
Rohde & Schwarz R&S SFU Broadcast Test System
45
Version 09.00, September 2011
Fading simulator (R&S®SFU-B30 option)
Number of paths
®
with R&S SFU-B31 option
System bandwidth
Path loss
range
resolution
accuracy
range
resolution
®
with R&S SFU-K30 option
maximum number
®
with R&S SFU-B30 option
®
with R&S SFU-B31 option
allowed delay differences
range
accuracy
setting range
accuracy
Path delay
Delay groups
Speed range
Doppler frequency range
Restart
Insertion loss
Correlation
correlation
correlation coefficient
setting range
resolution
correlation phase
setting range
resolution
Fading profiles
Pure Doppler
Static and constant phase
Rayleigh fading
Rice fading
GAUSS+DOPPLER (PI, PO profile)
GAUSS(0.08fd) (PI, PO profile)
GAUSS(0.1fd) (VU30, MR100 profile)
Lognormal fading
39
®
4
8
< 40 µs per group
0 km/h to 1725 km/h for 1 GHz
< 0.128 %
0 Hz to 1600 Hz
< 0.1 %
automatic, manual
–3 dB to +18 dB, automatic or userdefined, with clipping indication
®
with R&S SFU-B31 option; two faded
channels can be correlated in pairs
0 % to 100 %
5%
0° to 360°
1°
frequency ratio
(–1 to +1) × current Doppler frequency
resolution
0.01 × current Doppler frequency
path loss
0 dB to 50 dB
phase
0° to 360°
resolution
1°
pseudo noise interval
> 93 h
combination of Rayleigh fading and pure Doppler
39
power ratio
–30 dB to +30 dB
amplitude distribution
pseudo noise interval > 93 h
power density function
S(τi,f) = G (0.1A; 0; 0.08fd) + δ(f –0.5fd)
amplitude distribution
pseudo noise interval > 93 h
power density function
S(τi,f) = G (A; f; 0.08fd)
amplitude distribution
pseudo noise interval > 93 h
power density function
S(τi,f) = G (A; f: 0.1fd)
standard deviation
0 dB to 12 dB
resolution
1 dB
local constant
12 m to 200 m for fRF = 1 GHz
Ratio of discrete component to distributed component.
46
20
40
80 MHz
0 dB to 50 dB
0.01 dB
< 0.01 dB
0 s to 5.242 ms
10 ns
0.01 ns
Rohde & Schwarz R&S SFU Broadcast Test System
Version 09.00, September 2011
Enhanced fading (R&S®SFU-K30 option)
30 MHz fine delay mode
50 MHz fine delay mode
Moving delay mode
Birth-death mode
Two-path dynamic delay
40
number of paths
system bandwidth
path delay
resolution
number of paths
system bandwidth
path delay
resolution
system bandwidth
fading
number of fading paths
profile
reference path
delay
resolution
moving delay path
mean delay
delay variation
resolution
variation period
system bandwidth
fading
number of fading paths
profile
speed range
Doppler frequency range
delay
minimum delay
delay grid
resolution
grid positions
hopping parameters
start offset
hopping dwell time
total (start offset + hopping dwell time)
resolution
system bandwidth
fading
number of fading paths
moving mode
hopping positions
sliding function
profile
speed range
Doppler frequency range
delay
reference path (statistically in delay)
moving path
minimum delay
maximum delay
resolution
hopping dwell time
sliding period
resolution
®
12, 24 (with R&S SFU-B31 option)
30 MHz
®
see R&S SFU-B30 option
0.01 ns
®
8, 16 (with R&S SFU-B31 option)
50 MHz
®
see R&S SFU-B30 option
0.01 ns
50 MHz
2 per signal path
none
0 s to 40 µs
10 ns
150 ns to 39.85 µs
0.3 µs to 40 µs
10 ns
10 s to 500 s in steps of 100 ms
50 MHz
2 per signal path
pure Doppler
®
see R&S SFU-B30 option
®
see R&S SFU-B30 option
40
0 s to 40 µs
40
100 ns to 40/3 µs
1 ns
40
3 to 50
0 s to 429 s
1 ms to 429 s
max. 429 s
100 ns
50 MHz
2 per signal path
hopping/sliding
2/alternating
sinusoidal
static, pure Doppler, Rayleigh
®
see R&S SFU-B30 option
®
see R&S SFU-B30 option
0 s to 1638.00 µs
0 s to 1000.00 µs
0 s to 1000.00 µs
10 ns
100 ms to 10 s
50 s to 1000 s
10 ms
The maximum delay range of 40 µs may not be exceeded.
®
Rohde & Schwarz R&S SFU Broadcast Test System
47
Version 09.00, September 2011
Gaussian fading (R&S®SFU-K32 option)
Gaussian fading profiles
GAUS1
amplitude distribution
power density function
GAUS2
amplitude distribution
power density function
GAUSDAB
amplitude distribution
power density function
in line with EN 50248
pseudo noise interval > 93 h
S(τi,f) = G (A, –0.8fd, 0.05fd) +
G (A1, +0.4fd, 0.1fd), where A1 is 10 dB
less than A
pseudo noise interval > 93 h
S(τi,f) = G (B, +0.7fd, 0.1fd) +
G (B1, –0.4fd, 0.15fd), where B1 is 15 dB
less than B
pseudo noise interval > 93 h
S(τi,f) = G (A, ±0.7fd, 0.1fd)
where +0.7fd is used for paths of even
path number and –0.7fd is used for paths
of uneven path number;
path 1 is an exception and is
parameterized with +0.7fd
Analysis
RF power measurements (R&S®SFU-K55 option)
®
Power measurements require the use of R&S NRP-Zxx power sensors.
RF power measurements
Power measurement
display
Operating mode
units
auto
user
auto
user
optimization
length
frequency range
level range
dynamic range
connectors
calibration
supported power sensors
Filter
Range
Power sensors
48
®
Rohde & Schwarz R&S SFU Broadcast Test System
for analog and digital modulation modes
measured power
relative power
W, dBm, dBµV, selectable
measurement frequency coupled to
RF frequency
user-selectable measurement frequency
automatic setting of filter length
manual setting of filter length
auto once
0 to 128, settable
®
depends on the R&S NRP-Zxx power
sensor being used
USB, BNC female, front
zero
®
®
R&S NRP-Z11, R&S NRP-Z21,
®
®
R&S NRP-Z22, R&S NRP-Z23,
®
®
R&S NRP-Z24, R&S NRP-Z51,
®
®
R&S NRP-Z52, R&S NRP-Z55,
®
R&S NRP-Z91
Version 09.00, September 2011
BER measurements (R&S®SFU-K60 option)
BER measurements
for digital modulation modes
support
internal
external
Display
Start/restart
PRBS measurements
Inputs for BER clock, BER data,
BER enable
BER data
BER clock, BER data
BER enable
Output for BER error
41
no support
measured value
connectors
input impedance
input level
input data rate
PRBS
polarity
digital standard
®
R&S SFU-K1 (DVB-T)
®
R&S SFU-K2 (DVB-C/ISDB-C)
®
R&S SFU-K3 (DVB-S)
®
R&S SFU-K4 (ATSC)
®
R&S SFU-K5 (J.83/B)
®
R&S SFU-K6 (ISDB-T)
®
R&S SFU-K11 (T-DMB/DAB/DMB)
®
R&S SFU-K13 (DVB-SH)
®
R&S SFU-K14 (ATSC/A-VSB)
®
R&S SFU-K18 (ATSC-M/H)
®
R&S SFU-K16 (DVB-T2)
®
R&S SFU-K17 (DVB-C2)
®
R&S SFU-K8 (DVB-S2)
®
R&S SFU-K9 (DIRECTV)
®
R&S SFU-K7 (DMB-T)
®
R&S SFU-K12 (DTMB/DMB-TH)
®
R&S SFU-K15 (CMMB)
®
R&S SFU-K10 (MediaFLO™)
BER
error count
measurement time
manual
BNC female, rear
50 Ω
HCT
up to 90 Mbit/s
23
15
2 – 1 / 2 – 1 (in line with ITU-T O.151)
normal, inverted
always, active high, active low
BNC female, rear
50 Ω
HCT
connector
output impedance
output level
MPEG-2 TS measurements
Input
input interfaces
DATA VALID
input signal
payload (PRBS in line with ITU-T O.151)
PID
applicable to SPI interface
ASI, SPI (stuffing off), SMPTE 310
(see “MPEG-2 inputs”)
TS packet (see “Internal test signals”)
23
15
2 –1/2 –1
NULL (1FFF (hex)), variable
active
always
Trigger inputs/outputs
Triggers and connections reserved for future use
Triggers 1 to 10 IN/OUT
Main trigger IN
Main trigger OUT
41
connector
input impedance
load resistor
input/output level
connector
input impedance
input level
connector
load resistor
output level
D-Sub female, 25 pins, rear
high impedance
> 200 Ω
HCT
BNC female, rear
50 Ω
HCT
BNC female, rear
> 200 Ω
HCT
External support may be needed to perform BER measurement, e.g. by switching off FEC, LDPC or using T2MI gateway.
®
Rohde & Schwarz R&S SFU Broadcast Test System
49
Version 09.00, September 2011
General data
System data
System
operating system
memories for settings
display
controls
controls
command set
IEC/IEEE
address range
IEC/IEEE interface functions
Local control
External control
Remote control
Ethernet
IEC/IEEE
Ethernet
USB
AC supply input
Connectors
PC platform
Windows XP Embedded
internal hard disk
50
XVGA, 1024 × 768 pixel
rotary knob, hardkeys and softkeys
external mouse and keyboard via USB
SCPI 1999.5
IEC 60625 (IEEE 488)
1 to 30
SH1, AH1, T6, L4, SR1, RL1, PP1, DC1,
DT1, C0
10/100BaseT
Amphenol, 24 pins, rear
RJ-45, rear
USB, front and rear
IEC 60320 C14, rear
Operating data
Power supply
input voltage range
AC, nominal
AC supply frequency
power factor correction
EMC
Immunity to interfering field strength
Environmental conditions
operating temperature range
storage temperature range
climatic resistance
Mechanical resistance
vibration, sinusoidal
vibration, random
shock
Electrical safety
Dimensions
W×H×D
Weight
Recommended calibration interval
Standard warranty period
fully equipped
42
Reduced brightness of LCD at higher operating temperatures.
50
®
Rohde & Schwarz R&S SFU Broadcast Test System
100 V to 240 V
3.6 A to 1.3 A
47 Hz to 63 Hz
in line with EN 61000-3-2
in line with EN 55011 class B, EN 61326
up to 10 V/m
42
+5 °C to +45 °C
in line with EN 60068-2-1, EN 60068-2-2
–20 °C to +60 °C
95 % rel. humidity,
cyclic test at +25 °C/+40 °C,
in line with EN 60068-2-3, EN 60068-2-30
5 Hz to 150 Hz, max. 2 g at 55 Hz,
55 Hz to 150 Hz, 0.5 g const.,
in line with EN 60068-2-6
10 Hz to 300 Hz, acceleration 1.2 g
(RMS), in line with EN 60068-2-64
40 g shock spectrum,
in line with EN 60068-2-27, MIL-STD-810E
in line with IEC 61010-1, EN 61010-1 and
UL 61010B-1, CSA C22.2 No. 1010.1
435 mm × 192 mm × 460 mm (4 HU)
(17.14 in × 7.56 in × 18.12 in (4 HU))
15 kg (33.1 lb)
3 years
1 year
Version 09.00, September 2011
Ordering information
®
®
Option identification: R&S SFU-Bxy = hardware option, R&S SFU-Kxy = software option.
®
®
Delivery of R&S SFU base unit only with at least one coder or with the R&S SFU-K81 option installed.
®
If the R&S SFU-K81 option is installed, no digital or analog modulation system can be used.
Designation
Broadcast Test System
including power cable, hardcopy of getting started,
CD-ROM (includes user manuals and getting started),
®
®
R&S SFU-B2 and R&S SFU-B3
Options
Basic configuration
Realtime Disabled
(option available only at initial delivery)
Realtime Enabled
®
(only if R&S SFU-K81 is installed)
RF path
High Power
Digital modulation systems
Terrestrial standards
DVB-T2 Coder
®
®
(requires an installed R&S SFU-B1 or R&S SFU-B10 for
®
single PLP or R&S SFU-B15 for single PLP and multi PLP)
DVB-T/-H Coder
DVB-SH Coder
T-DMB/DAB/DMB Coder
DMB-T (TDS-OFDM) Coder
®
®
(requires an installed R&S SFU-B1 or R&S SFU-B10)
DTMB/DMB-TH (TDS-OFDM) Coder
®
®
(requires an installed R&S SFU-B1, R&S SFU-B10 or
®
R&S SFU-B15)
CMMB Coder
®
®
(requires an installed R&S SFU-B1, R&S SFU-B10 or
®
R&S SFU-B15)
ISDB-T/ISDB-TB/ISDB-TSB Coder
ISDB-Tmm Coder
®
(requires an installed R&S SFU-B15)
ATSC/8VSB Coder
ATSC-M/H Coder
ATSC/A-VSB Coder
MediaFLO™ Coder
®
®
(requires an installed R&S SFU-B10 or R&S SFU-B15)
Cable standards
DVB-C2 Coder
®
(requires an installed R&S SFU-B15)
DVB-C/ISDB-C Coder
J.83/B / DOCSIS Coder
Satellite standards
DVB-S2 Coder
®
®
(requires an installed R&S SFU-B1, R&S SFU-B10 or
®
R&S SFU-B15)
DVB-S/DVB-DSNG Coder
DIRECTV Legacy Modulation Coder
®
®
(requires an installed R&S SFU-B1 or R&S SFU-B10 or
®
R&S SFU-B15)
AMC Advanced Modulation Coder
®
(requires an installed R&S SFU-K8 and an installed
®
®
®
R&S SFU-B1, R&S SFU-B10 or R&S SFU-B15)
Type
®
R&S SFU
Order No.
2110.2500.02
®
2110.7960.02
®
2110.7976.02
®
2110.8008.03
®
2110.7847.02
®
2110.7301.02
only on request
2110.7518.02
only on request
®
2110.7760.02
®
2110.7818.02
®
2110.7376.02
in preparation
®
2110.7353.02
2110.7860.02
only on request
only on request
®
only on request
®
2110.7324.02
2110.7360.02
®
2110.7399.02
®
2110.7330.02
2110.7401.02
®
only on request
R&S SFU-K81
R&S SFU-K82
R&S SFU-B90
R&S SFU-K16
R&S SFU-K1
®
R&S SFU-K13
®
R&S SFU-K11
®
R&S SFU-K7
R&S SFU-K12
R&S SFU-K15
R&S SFU-K6
®
R&S SFU-K106
R&S SFU-K4
®
R&S SFU-K18
®
R&S SFU-K14
®
R&S SFU-K10
R&S SFU-K17
R&S SFU-K2
®
R&S SFU-K5
R&S SFU-K8
R&S SFU-K3
®
R&S SFU-K9
R&S SFU-K108
®
Rohde & Schwarz R&S SFU Broadcast Test System
51
Version 09.00, September 2011
Designation
Analog modulation systems
AM/FM RDS Coder
®
(requires an installed R&S SFU-B2)
ATV Standard B/G Coder
®
(requires an installed R&S SFU-B2)
ATV Standard D/K Coder
®
(requires an installed R&S SFU-B2)
ATV Standard I Coder
®
(requires an installed R&S SFU-B2)
ATV Standard M/N Coder
®
(requires an installed R&S SFU-B2)
ATV Standard L Coder
®
(requires an installed R&S SFU-B2)
Multi ATV Predefined
®
(requires an installed R&S SFU-B3)
Simulation
Fading Simulator
Fading Simulator Extension to 40 Paths
®
(requires an installed R&S SFU-B30)
Enhanced Fading
®
(requires an installed R&S SFU-B30)
Gaussian Fading
®
(requires an installed R&S SFU-B30)
®
(included in R&S SFU-B30 option)
ARB Generator
®
(requires an installed R&S SFU-B3)
Interferer Management
Multichannel ARB Waveforms
AWGN Noise
Phase Noise
Impulsive Noise
Multinoise Use
®
®
(requires at least one installed R&S SFU-K40, R&S SFU-K41 or
®
R&S SFU-K42 and installed hardware D/A converter board
2110.3406 model .03)
Custom OFDM
(generates customer-specific OFDM signals)
Waveform libraries
DVB-T2 Waveforms
®
(can be used with R&S SFU-K35)
ISDB-Tmm Waveforms
®
(can be used with R&S SFU-K35)
CMMB Waveforms
®
(can be used with R&S SFU-K35)
MediaFLO™ Waveforms
®
(can be used with R&S SFU-K35)
DVB-H Waveforms
®
(can be used with R&S SFU-K35)
T-DMB/DAB Waveforms
®
(can be used with R&S SFU-K35)
DRM Waveforms
®
(can be used with R&S SFU-K35)
DRM+ Waveforms
®
(can be used with R&S SFU-K35)
HD Radio™ Waveforms
®
(can be used with R&S SFU-K35, Ibiquity license required)
DTV Interferers
®
(can be used with R&S SFU-K35)
Cable Interferers
®
(can be used with R&S SFU-K35)
®
MoCA Waveforms
®
(can be used with R&S SFU-K35)
52
®
Rohde & Schwarz R&S SFU Broadcast Test System
Type
Order No.
®
2110.7830.02
®
2110.8050.02
®
2110.8037.02
®
2110.8043.02
®
2110.8066.02
®
2110.8072.02
®
2110.8089.02
®
2110.7530.02
2110.7547.02
®
2110.7560.02
®
2110.7630.02
®
2110.7601.02
®
2110.7647.02
2110.7924.02
2110.7653.02
2110.7660.02
2110.7676.02
2110.7682.02
®
1160.6402.02
®
2112.3803.02
®
in preparation
®
2112.3726.02
®
2110.2974.02
®
2110.4425.02
®
2110.4277.02
®
2110.4554.02
®
in preparation
®
only on request
®
2110.4690.02
®
2110.3212.02
®
in preparation
R&S SFU-K170
R&S SFU-K190
R&S SFU-K191
R&S SFU-K192
R&S SFU-K193
R&S SFU-K194
R&S SFU-K199
R&S SFU-B30
®
R&S SFU-B31
R&S SFU-K30
R&S SFU-K32
R&S SFU-K35
R&S SFU-K37
®
R&S SFU-K38
®
R&S SFU-K40
®
R&S SFU-K41
®
R&S SFU-K42
®
R&S SFU-K43
R&S SMU-K15
R&S SFU-K359
R&S SFU-K365
R&S SFU-K358
R&S SFU-K355
R&S SFU-K352
R&S SFU-K351
R&S SFU-K353
R&S SFU-K361
R&S SFU-K357
R&S SFU-K354
R&S SFU-K356
R&S SFU-K364
Version 09.00, September 2011
Designation
Satellite Interferers
®
(can be used with R&S SFU-K35)
ISDB-S Waveforms
®
(can be used with R&S SFU-K35)
Analog Signals
®
(can be used with R&S SFU-K35)
Digital baseband
TS Generator including SDTV streams
TRP Player
®
(requires an installed R&S SFU-B6 and an installed
®
R&S SFU-B4)
TS/ETI Recorder
®
®
(requires an installed R&S SFU-K22, R&S SFU-B6 and
®
R&S SFU-B4)
TS generator libraries
DVB-H Stream Library
®
(requires an installed R&S SFU-K20)
Test Card M Streams
®
(requires an installed R&S SFU-K20)
HDTV Sequences
®
(requires an installed R&S SFU-K20)
H.264 Stream Library
®
(requires an installed R&S SFU-K20)
ISDB-T Stream Library
®
(requires an installed R&S SFU-K20)
TRP player libraries
T-DMB/DAB Streams
®
(requires an installed R&S SFU-K22)
DAB+ Streams
®
(requires an installed R&S SFU-K22)
MediaFLO™ Streams
®
(requires an installed R&S SFU-K22)
ISDB-T Streams
®
(requires an installed R&S SFU-K22)
CMMB Streams
®
(requires an installed R&S SFU-K22)
ATSC Mobile DTV Streams
®
(requires an installed R&S SFU-K22)
DVB-T2 MI Streams
®
(requires an installed R&S SFU-K22)
Transport Streams for EMC
®
(requires an installed R&S SFU-K22)
DMB Streams France
®
(requires an installed R&S SFU-K22)
Type
®
R&S SFU-K363
Order No.
2115.2537.02
®
2115.2450.02
®
2110.3941.02
®
2110.7476.02
2110.7499.02
®
2110.7482.02
®
2085.8704.02
®
2085.7708.02
®
2085.7650.02
®
2085.9052.02
®
2085.9146.02
®
2110.4348.02
®
2110.4760.02
®
2110.2968.02
®
2110.4777.02
®
2112.3649.02
®
2110.3812.02
®
2115.2120.02
®
2115.2520.02
®
2115.2543.02
R&S SFU-K362
R&S SFU-K360
R&S SFU-K20
®
R&S SFU-K22
R&S SFU-K21
R&S DV-DVBH
R&S DV-TCM
R&S DV-HDTV
R&S DV-H264
R&S DV-ISDBT
R&S SFU-K221
R&S SFU-K223
R&S SFU-K222
R&S SFU-K224
R&S SFU-K225
R&S SFU-K226
R&S SFU-K227
R&S SFU-K228
R&S SFU-K229
®
Rohde & Schwarz R&S SFU Broadcast Test System
53
Version 09.00, September 2011
Designation
Analog baseband
Video Generator
®
®
(included in R&S SFU-K190 to R&S SFU-K194)
Analog video signal library
ATV Video
®
®
(can be used with R&S SFU-K190 to R&S SFU-K194)
Measurement and analysis functions
RF Power Measurements
®
(can be used with R&S NRP-Zxx power sensors)
BER Measurements
(cannot be used at all or only to a limited extent for DVB-S2,
DIRECTV, DTMB, DMB-TH and MediaFLO™)
Baseband inputs/outputs
Extended I/Q
ETI Input/Output
User I/O (additional input/output)
®
(supported by R&S SFU firmware versions < 1.70)
Coder extensions
Coder Extension 1 (for digital TV)
Coder Extension 10 (for digital TV)
Coder Extension 15 (for digital TV)
Coder Extension 2 (for analog TV)
®
(preinstalled in R&S SFU from serial no. 101000)
Memory extensions
Memory Extension 1 (512 Mbyte/128 sample)
®
upgrade for R&S SFU up to serial no. 101000
®
(not preinstalled in R&S SFU up to serial no. 101000,
®
preinstalled for R&S SFU with serial no. 101000 to 101699)
Memory Extension 1 (4 Gbyte/1 Gsample)
®
upgrade for R&S SFU starting with serial no. 101700)
Memory Extension 2 (for TRP player)
®
(preinstalled in R&S SFU from serial no. 101000 to 101699
®
integrated in R&S SFU from serial no. 101700)
Additional Hard Disk (for TRP player)
®
(for R&S SFU with serial numbers < 101000)
Additional Hard Disk (for TRP Player)
®
(for R&S SFU with serial numbers > 101000)
Other expansions
ARB Generator Upgrade Kit
®
(for R&S SFU with serial numbers < 101xxx)
®
Upgrade Kit for R&S SFU-K43
®
(for R&S SFU with D/A converter board 2110.3406 models .01
and .02)
Impedance Matching Pad 75/50 Ω
®
®
(can be used with R&S SFU-K190 to R&S SFU-K194)
54
®
Rohde & Schwarz R&S SFU Broadcast Test System
Type
Order No.
®
2110.7799.02
®
2110.4831.02
®
2110.7753.02
®
2110.7782.02
®
2110.7953.02
2110.7553.03
only on request
®
only on request
2110.7747.02
2110.7918.02
2110.7430.02
®
2110.7447.02
®
2110.7447.04
®
2110.7453.02
®
2110.7501.02
®
2110.7501.03
®
2110.2900.02
®
2110.7699.02
®
2110.7276.02
R&S SFU-K23
R&S ATV-Video
R&S SFU-K55
R&S SFU-K60
R&S SFU-K80
®
R&S SFU-B11
®
R&S SFU-B5
R&S SFU-B1
®
R&S SFU-B10
®
R&S SFU-B15
®
R&S SFU-B2
R&S SFU-B3
R&S SFU-B3
R&S SFU-B4
R&S SFU-B6
R&S SFU-B6
R&S SFU-U35
R&S SFU-U43
R&S SFU-Z19
Version 09.00, September 2011
Designation
Recommended extras
Hardcopy of user manuals; includes getting started
(in English)
®
Documentation of R&S SFU Calibration Values
LVDS Cable for digital I/Q input/output (2 m)
Adapter for Telescopic Sliders
Keyboard with USB Interface (US assignment)
Mouse with USB Interface, optical
External USB DVD Drive
Type
Order No.
R&S SFU-DCV
®
R&S Digital IQ cable 26P2M
®
R&S ZZA-T45
®
R&S PSL-Z2
®
R&S PSL-Z10
®
R&S PSP-B6
Service options
Two-Year Calibration Service
Three-Year Calibration Service
Five-Year Calibration Service
One-Year Repair Service following the warranty period
Two-Year Repair Service following the warranty period
Four-Year Repair Service following the warranty period
R&S CO2SFU
®
R&S CO3SFU
®
R&S CO5SFU
®
R&S RO2SFU
®
R&S RO3SFU
®
R&S RO5SFU
2110.2522.12
®
®
2082.0490.30
1130.1302.00
1109.3774.00
1157.6870.03
1157.7060.02
1134.8201.22
Please contact your local
Rohde & Schwarz sales office.
For product brochure, see PD 0758.1658.12 and www.rohde-schwarz.com
®
Rohde & Schwarz R&S SFU Broadcast Test System
55
Service you can rely on
JWorldwide
J Local
and personalized
and flexible
J Uncompromising quality
J Long-term dependability
J Customized
About Rohde & Schwarz
Rohde & Schwarz is an independent group of companies
specializing in electronics. It is a leading supplier of solutions in the fields of test and measurement, ­broadcasting,
radiomonitoring and radiolocation, as well as secure
communications. Established more than 75 years ago,
­Rohde & Schwarz has a global presence and a dedicated
service network in over 70 countries. Company headquarters are in Munich, Germany.
Environmental commitment
❙❙ Energy-efficient products
❙❙ Continuous improvement in environmental sustainability
❙❙ ISO 14001-certified environmental management system
Certified Quality System
ISO 9001
Rohde & Schwarz GmbH & Co. KG
www.rohde-schwarz.com
Regional contact
❙❙ Europe, Africa, Middle East
+49 89 4129 12345
[email protected]
❙❙ North America
1 888 TEST RSA (1 888 837 87 72)
[email protected]
❙❙ Latin America
+1 410 910 79 88
[email protected]
❙❙ Asia/Pacific
+65 65 13 04 88
[email protected]
❙❙ China
+86 800 810 8228/+86 400 650 5896
[email protected]
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG
Trade names are trademarks of the owners | Printed in Germany (as/ft)
PD 0758.1658.22 | Version 09.00 | September 2011 | R&S®SFU
Subject to change
© 2004 - 2011 Rohde & Schwarz GmbH & Co. KG | 81671 München, Germany
0758165822
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement