Brochure (Smoke Alarm)

Brochure (Smoke Alarm)
SMOKE & CO
COMBO
A
L
A
R
M
PHOTOELECTRIC
CAT.
SC7010B
120V AC, 60Hz Wire-in
with 3V (two 1.5V AA) Battery Backup
Description:
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
PHOTOELECTRIC
Photoelectric technology is generally
more sensitive at detecting large
particles, which tend to be produced
in greater amounts by smoldering fires.
END OF LIFE SIGNAL
Provides audible notice when alarm
needs to be replaced.
SPREAD SPECTRUM
HORN TONE
Easier for elderly with normal age
related hearing loss to hear the horn.
OPTIPATH 360
TECHNOLOGY TM
Provides 360 degrees of direct access
to the smoke sensing chamber.
7
The BRK Model No. SC7010B is a wire-in, 120V AC 60Hz single and/or multiple
station combination smoke and carbon monoxide alarm specifically designed for
residential and institutional applications including sleeping rooms of hospitals,
hotels, motels, dormitories and other multi-family dwellings as defined in
standard NFPA 101. Model SC7010B complies with UL217 and UL2034, CSFM,
NFPA 72 and NFPA 720, HUD, FHA and other agencies that model their codes
after the above agencies. It meets building codes where AC/DC photoelectric
smoke and carbon monoxide alarms are required.
The BRK SC7010B is a state-of-the-art hardwired with battery backup smoke/CO
combo alarm that features a photoelectric smoke sensing chamber, an
electrochemical CO sensor and an End of Life signal. The Spread Spectrum Horn
Tone has a lower and varying frequency that makes it easier for the elderly with
normal age related hearing loss to hear the horn. This alarm features two latching
features and two silence features. Alarm Latch: Easily identifies initiating alarm
even after alarm condition has subsided. Low Battery Latch: Identifies which unit
is in low battery condition by blinking the green power light. Low Battery Silence:
Temporarily silence the low battery chirp for up to eight hours. Alarm Silence:
Silence alarm for several minutes. Other features include an 85dB horn, single
button test/silence, an easy access battery drawer and dust cover. OptiPath 360
Technology: Exclusive patented technology provides 360 degrees of direct access
to the smoke sensor. Two locking features are provided to prevent battery theft
and/or theft of the unit. Connection to AC power is made with a Quick-Connect
wiring harness. Installation is quick, easy and cost effective.
CAT.
SC7010B
TOP VIEW
TECHNICAL SPECS
SIDE VIEW
Alarm Dimensions:
Weight:
Operating Voltage:
Operating Current:
Temperature Range:
Humidity Range:
Audio Alarm:
Voice Output:
MOUNTING
BRACKET
5.0"
Test/Silence:
2.0"
ARCHITECTURAL AND ENGINEERING SPEC
The combination smoke and carbon monoxide alarm shall be a BRK Model SC7010B
and shall provide at a minimum the following features and functions:
1. A photoelectric smoke sensing chamber and an electrochemical CO sensor.
2. Powered by 120V AC, 60Hz and have a monitored battery backup and a solid
state piezo horn rated at 85dB at 10 ft. and shall be capable of self restoring.The
horn shall have a lower and varying horn frequency to to make it easier for the
elderly with normal age related hearing loss to better hear the horn.
3. The unit shall have an "End of Life" signal. This signal should be capable of
temporarily being silenced for up to 2 days. After about 2 days, the signal will
resume. After about 2-3 weeks the signal cannot be silenced.
4. A visual power-on indicator to confirm unit is receiving AC power or has switched
to battery backup mode. Separate LED 's to indicate a smoke or CO alarm.
5. The CO sensor is adjusted not to detect CO levels below 30 PPM and will not
alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm
at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO
between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes.
6. Two Latching features: Alarm Latch to easily identify initiating alarm after alarm
condition has subsided. Low battery latch: to visually identify which unit is in low
battery condition. Two Silence Features: Alarm Silence to temporarily silence
nuisance alarms. Low Battery Silence to silence low battery chirp for up to 8 hours.
7. Two Locking features - tamper resistant locking pins that lock battery drawer
and/or alarm to mounting bracket.
8. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and
relative humidity between 10% and 95%.
9. The unit shall have a plug in connector and be capable of interconnection of up to
18 alarms, 12 of which can be smoke alarms.
10. The unit shall at a minimum meet the requirements of UL217 and UL2034,
CSFM, NFPA 72 and 720 and the ICC.
INSTALLATION OF ALARM
1
2
3
2
6
5
678
8
1.
2.
3.
4.
Automatic when smoke and/or CO clears
Interconnections:
Up to 18 units of First Alert or BRK Smoke, CO and
Heat Alarms. Maximum of 12 smoke alarms. See
user’s manual for details.
Photoelectric
Electrochemical
Smoke Sensor:
CO Sensor:
Indicator Lights/Sounds:
AC Power:
Constant Green LED
DC Power:
Intermittent Green LED
Local Alarm:
Red LED flashes
Remote Alarm:
Red LED off
Alarm Latch:
Red LED flashes every 5 seconds after local alarm stops
Low Battery Latch: “Power” LED flashes green on for 2 seconds,
off for 2 seconds.
Listing:
Listed to UL217 and UL2034 Standards
SHIPPING SPECS:
Individual Carton Dimensions
Weight
Cube
UPC
5.13"L x 2.38"W x 5.13"H
0.74 lbs.
0.04 ft3
0 29054 02280 6
Master Carton Dimensions
Master Pack
Weight
Cube:
I2of5:
10.75"L x 7.88"W x 11.06"H
12
9.4 lbs.
0.54 ft3
100 29054 02280 3
Pallet Information
Cases per Layer
Number of Layers:
Cases per Pallet:
Units per pallet:
Cube:
Weight:
22
4
88
1,056
54.0 ft3
892 lbs.
Remove Pin from
Mounting Bracket
54 3
Mounting bracket
Mounting Slots
Locking Pins
Hot (Black) AC Wire
Nuetral (White) AC Wire
Interconnect (Orange) Wire
Pull-out Battery Drawer
Quick-Connect Plug
A
7
Alarm Reset:
BATTERY DRAWER LOCK
}
4
1.
2.
3.
4.
5.
6.
7.
8.
B
}
Installation of this smoke alarm must conform to all local electrical
codes and Article 760 of the National Electrical Code (NFPA 70)
and NFPA 72. Interconnected units must meet the following
requirements: wire to be #18 gauge or larger and be rated at least
300V. It is recommended that all units be on the same fuse or
circuit breaker. If local codes do not permit, be sure the neutral
wire is common to both phases.
THE PARTS OF THIS SMOKE ALARM
5.0” dia x 2.0”H
9.3 oz
120V AC 60Hz with two 1.5V AA battery backup
.05 amps (standby/alarm)
40°F (4°C) to 100°F (38°C)
10% to 95% relative humidity (RH)
85dB at 10 feet
Choice of 11 pre-programmed locations warns of smoke
or CO danger and location of danger
Electronically simulates smoke or carbon monoxide
condition, causing the unit to alarm
Press and hold test/silence button
Close Door. Insert Pin in Holes
through alarm and Battery Drawer
1
54 3 2 1
A. Unswitched 120VAC 60 Hz source
B. To additional units; Maximum = 18 total
(Maximum 12 Smoke Alarms)
Smoke Alarm
5. Junction Box
Ceiling or Wall
6. Neutral Wire (White)
Power Connector
7. Interconnect Wire (Orange)
Wire Nut
8. Hot Wire (Black)
©2010 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
brkelectronics.com
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM3077
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement