Kufatec MMI High (2G), MMI High Navigation Plus (3G), MMI Navigation Plus with MMI touch (3G Plus) FISCUBE Installation manual

Version 1.07
(25.03.2013)
Installation manual
FISCUBE®
Audi
Article-ID
38358
38358-1
38359
For factory equipment
MMI High (2G)
MMI High Navigation Plus (3G)
MMI Navigation Plus with MMI touch (3G Plus)
www.kufatec.de
Kufatec GmbH & Co. KG • Dahlienstr. 15 • 23795 Bad Segeberg • e-mail: [email protected]
Content
General advice .........................................................................................................................................2
Safety Instructions....................................................................................................................................3
References of legal regulations for operation ...........................................................................................3
FISCUBE..................................................................................................................................................4
Scope of delivery......................................................................................................................................5
Wiring diagram .........................................................................................................................................5
Installation instruction MMI 2G .................................................................................................................6
Interface connection MMI 2G....................................................................................................................7
Connection Video loom MMI 2G ...............................................................................................................9
Connection video loom MMI 2G – RVC available ...................................................................................10
Installation instruction MMI 3G / MMI 3G Plus ........................................................................................11
Interface connection MMI 3G/ MMI 3G Plus ...........................................................................................13
Connection video loom MMI 3G/ MMI 3G Plus .......................................................................................14
Coding....................................................................................................................................................17
USB-connection .....................................................................................................................................18
Control elements ....................................................................................................................................19
Start Up ..................................................................................................................................................21
Operation instruction MMI 2G.................................................................................................................24
Operating instruction MMI 3G.................................................................................................................32
Operating instruction MMI 3G Plus .........................................................................................................40
Additional video input 2G/ 3G/ 3GPlus ...................................................................................................47
Video output ...........................................................................................................................................47
Connection in case of factory fitted analog TV MMI 2G ..........................................................................48
1
General advice
While developing this product, your personal safety combined with the best operating service, modern
design and an up-to-date production technique was especially taken into account.
Unfortunately, despite the utmost care injuries and/or damages might occur due to improper installation
and/or use.
Please read the attached instruction manual completely with great care and keep it!
All articles of our production line pass through a 100 % check - for your safety and security.
We reserve the right to carry out technical changes which serve the improvement at any time.
According to each article and purpose, it is sometimes necessary to check each country’s legal
regulations before installing and starting the unit.
In case of guarantee claims, the device has to be sent back to the seller in the original packaging with
the attached bill of purchase and detailed defect‘s description. Please pay attention to the manufacturer‘s
return
requirements (RMA). The legal warranty directions are valid.
The guarantee claim as well as the operating permission becomes invalid due to:
a) unauthorized changes to the device or accessories which have not been approved or carried out
by the manufacturer or its partners
b) opening the device‘s frame
c) device‘s repairs carried out by one‘s own
d) improper use / operation
e) brute force to the device (drop, wilful damage, accident etc.)
During installation, please pay attention to all safety relevant and legal directions. The device has only to
be installed by trained personnel or similarly qualified people.
Please limit on installation or function problems the troubleshooting to 0.5 hours for mechanical
and 1.0 hours for electronic works.
To avoid unnecessary work and to save costs, please send us immediately via the contact form Kufatec
(http://www.kufatec.de/shop/de/infocenter/) a request to our technical support.
Please quote the following necessarily:
 Vehicle Identification Number

Part number of the retrofit kit

Detailed description of problems

Already conducted operations
2
Safety Instructions
Installation requires special knowledge.
Do not install the unit yourself. For safe and reliable installation, consult a dealer having special
knowledge.
• Never use bolts or nuts from the car’s safety devices for installation. If bolts or nuts from the
steering wheel ,brakes or other safety devices are used for installation of the unit, it may cause an
accident.
•Use the unit with a DC 12V negative ground car. This unit cannot be used in large trucks which
use a DC 24V battery. If it is used with a DC 24V battery, it may cause a fire or accident.
• Avoid installing the unit in following places: - Where it would hinder your safe driving. - Where it
could damage the car’s fittings.
• This unit is only for use in the following vehicles. Only connections described within this
instruction guide are allowed or required to use for installation.
• For damage impact caused by faulty installation, unsuitable connections inappropriate vehicles
Kufatec GmbH assumes no liability.
• We advise you that these units process datas out of the MOST - protocol from the vehicle. As
the supplier of this device we don‘t know the overall system you are working with. If our device
causes damage due to other changes made by to the vehicle Kufatec GmbH assumes no liability.
• Kufatec GmbH supplier do not guaranty the use of the product for changing’s within a new
vehicle series.
• If the car manufacturer’s don‘t agree with the installation of our device by reason of warranty the
Kufatec GmbH assumes no liability. Please check conditions and warranty before you begin the
installation.
• Kufatec GmbH supplier reserves the right to change the device specifications without notice.
NOTE: The road traffic has to have your full attention.
Telephone operations should only be done by suitable traffic and weather situations. The volume
need to be set that you are still able to realise acoustic warn signals (Police, fire brigade).
• Errors and changes excepted.
References of legal regulations for operation
Only use this unit in the intended domain.
If you use it in a foreign domain, if the unit is not installed properly, or if the unit will be reconstructed, the
guarantee will expire.
3
FISCUBE
Features
DVB-T –
Integrated DVB-T receiver with TV recording function
E13 approval - 10R-03-12423
Video/Audio coding: MPEG II (No MPEG4 /HDTV)
TV recording stored on USB source – Recording capacity 3h with an 5GB USB-memory
TV recording format: *.mpg
Dimensions (LxBxH): 11,4cm x 9,2cm x 3,1cm
USB -
USB connection for memory stick or HDD (FAT 32) – limited capacity 40GB
NOTE: Only for hard drives with current consumption not more than 500mA - it's
necessary to have a external power supply with capacity over 500mA.
Supported audio format: mp3, wav
Supported video format: mpg; *.dat; *.vob; *.avi with MPEG4 ASP.
USB extension must not be longer than 2 meter!
NOTE USB Root directory
Up to 95 entries can be stored within the root directory. Each entry can include another
95 entries.
NOTE: Entries consists of single files as well as directories.
NOTE: Before installing the multimedia system you need to check whether the car is retrofitted
with an interface not developed by Kufatec GmbH & Co. KG. In case a non-Kufatec interface is
fitted we are not able to guaranty the absolute operation of the FISCUBE system. You may
need to remove the non-Kufatec interface.
NOTE: Fiber optical looms MUST NOT BE CRACKED! The recommended radius
for fitting is 40 mm.
In case of incorrect fitting we are not able to guaranty the absolute operation of the multimedia
system.
NOTE: After the very first installation the system is completing an automatic generated search
for available TV channels. For refreshing the channel list please see section „Start –up”.
NOTE: Make sure no wires are wound up. You produce a coil and thus maybe failures.
NOTE: Do not cover the louver so that the device does not overheat.
4
Scope of delivery
FISCUBE Interface
Wiring
Aerials 2x
Wiring diagram
Fig.1
* If factory fitted
Note MMI 2G: In case the vehicle is not factory fitted with rear view camera (RVC) the
displayinterface needs to be replaced. A displayinterface with FBAS input is needed. After
replacing the displayinterface the component protection needs to be removed.
Please contact your local Audi dealer.
Detailed information please see page 46
5
Installation instruction MMI 2G
For vehicles WITHOUT factory fitted rear view camera
Fig. 2
1 – Radiobox A4 8K, A5 8T, A6 4F, A8 4E
2 – Radiobox Q7 4L
3 – Displayinterface A4 8K, A5 8T
4 – Displayinterface A6 4F, A8 4E, Q7 4L
5 – FISCUBE Interface
For vehicles WITH factory fitted rear view camera
Fig. 3
1 – Radiobox A4 8K, A5 8T, A6 4F
2 – Radiobox Q7 4L
3 – RVC – control unit Q7 4L
4 – RVC – control unit A4, A5, A6 4F, A8 4E
5 – FISCUBE Interface
Location Radiobox
The fitting location of the radiobox can be verify within the vehicle.
A4 8K, A5 8T, A6 4F, A8 4E
Q7 4L
Fig.4
Fig.5
6
Fig.6
Interface connection MMI 2G
Fiber optic cable
The connection will be completed plug & play on the back of the radiobox.
Fig.7
Remove the original fiber optical cable of the radiobox (Fig. 8). Join the original fiber optical connector to
the female connector of the delivered loom (Fig. 9).
Fig.8
Fig.9
Put the optical connector of the delivered loom to the radiobox (Fig. 10). ). Figure 11 is showing the final
connection of the Interface.
Fig.10
Fig.11
7
Join the 18-pole connector as well as the fiber optical to the interface (Fig. 12).
Fig.12
Fig.13
Aerials
To ensure correct operation, aerials should be installed far from: - shielded glasses/ Bodywork/ Other
parts – which may prevent a good signal reception.
Mount the supplied areal horizontally or vertically. It is recommended to try different positions to assess
the ideal location for the positioning of the aerials within the vehicle.
NOTE: Sequence of Installation – Aerials needs to be connected to the interface FIRST.
AFTER connecting the aerials the power supply can be completed. In case this sequence
will be not considered the TV reception can be weak. The number of available channels
could decrease.
Power
The connection will be completed plug & play on the back of the radiobox. Remove the original power
connector of the radiobox (Fig. 14). Join the original connector to the female connector of the delivered
loom (Fig. 15).
Fig.14
Fig.15
Put the connector of the delivered loom to the radiobox (Fig. 16). Figure 17 is showing the final
connection of the multimedia interface.
Fig.16
Fig.17
8
Connection Video loom MMI 2G
For vehicles WITHOUT factory fitted rear view camera
Wire the loom into the front of the vehicle (Fig. 18 - 20).
Fig.18
Fig.19
Fig.20
A4 8K, A5 8T
Remove the climate control with suitable tools (Fig. 21). Remove the CD-changer (Fig. 22). Loosen the
necessary screws of the displayinterface and remove it (Fig. 23).
Fig.21
Fig.22
Fig.23
A6 4F, A8 4E, Q7 4L
Loosen the necessary screws of the glove box (Fig. 24, 25). Remove the displayinterface (Fig. 26).
Fig.24
Fig.25
9
Fig.26
Connect the video loom to the displayinterface (Fig. 27).
In case the vehicle is not factory fitted with rear view camera (RVC) the displayinterface
needs to be replaced – Kufatec Article-ID. 35600
Notes please see page 46
Fig.27
Connection video loom MMI 2G – RVC available
For vehicles WITH factory fitted rear view camera
Location RVC-control unit
Depending of the vehicle the RVC-control unit is fitted on different fitting locations.
A4 8K, A5 8T, A6 4F, A8 4E
Q7 4L
Fig.28
Fig.29
Connect the video loom to the RVC-control unit -
FAKRA BROWN (Fig. 30).
Fig.30
10
Installation instruction MMI 3G / MMI 3G Plus
Fig. 31
1 – Radiobox A4/ A5, A6 4F, A6-A7 4G, A8 4E, Q5 8R
2 – Radiobox Q7 4L
3 – Radiobox A8 4H
4 – 3G unit A4/A5, A6 4G, A7 4G, A8 4H, Q5, Q7
5 – MMI 3G unit A6 4F
5 – DVD changer A8 4H
6 – FISCUBE Interface
Audi A4 8K, A5 8T, A6 4F, Q5 MMI 3G
Loosen the necessary screws of the trunk cover on the left hand side (Fig. 32). The radiobox is located
behind the cover (Fig. 34).
Fig.32
Fig.33
Fig.34
Audi Q7 4L MMI 3G
Remove the trunk cover on the right hand side. The radiobox is located behind (Fig. 36).
Fig.35
Fig.36
11
Audi A8 4H
Remove the trunk cover on both sides. Remove the cover of the rear seats (Fig. 39).
Fig.37
Fig.38
Fig.39
Loosen the necessary screws of the bracket of the comfort control unit (Fig. 40, 41). The radiobox is
located behind (Fig. 42).
Fig.40
Fig.41
Fig.42
Audi A6 4G, A7 4G
Remove the cover on the left hand side of the trunk. The radiobox is situated in the bottom part of the
control unit rack.
12
Interface connection MMI 3G/ MMI 3G Plus
Fiber optic cable
The connection will be completed plug & play on the back of the radiobox.
Remove the original fiber optical cable of the radiobox (Fig. 43). Join the original fiber optical connector
to the female connector of the delivered loom (Fig. 44).
Fig.43
Fig.44
Put the optical connector of the delivered loom to the radiobox (Fig. 45). Figure 46 is showing the final
connection of the multimedia interface.
Fig.45
Fig.46
Join the 18-pole connector as well as the fiber optical to the interface (Fig. 47).
Fig.47
Fig.48
13
Aerials
To ensure correct operation, aerials should be installed far from: - shielded glasses/ Bodywork/ Other
parts – which may prevent a good signal reception.
Mount the supplied areal horizontally or vertically. It is recommended to try different positions to assess
the ideal location for the positioning of the aerials within the vehicle.
NOTE: Sequence of Installation – Aerials needs to be connected to the interface FIRST.
AFTER connecting the aerials the power supply can be completed. In case this sequence
will be not considered the TV reception can be weak. The number of available channels
could decrease.
Power
With the connection of 2 new wires to the Quadlock connector of the radiobox you will complete the
fitting of the power supply. Please see Fig 50. In order to achieve a proper connection we recommend
both crimping and soldering the new wires.
BROWN (Ground) – PIN 17
RED (Steady plus) – PIN 18
NOTE: Color of the loom can be gray – Connection according loom printing.
Fig. 49
Fig.50
Connection video loom MMI 3G/ MMI 3G Plus
Wire the video loom in the front oft he vehicle (Fig. 51 - 53).
Fig.51
Fig.52
14
Fig.53
A4 8K, A5 8T, Q5 8R, Q7 4L
Remove the MMI 3G unit using suitable tools (Fig. 54, 55).
Fig.54
Fig.55
A6 4F, A8 4E
Loosen the necessary screws of the glove box (Fig. 56, 57).
Fig.56
Fig.57
A8 4H
Loosen the screw of the center consol cover (Fig. 58) as well as the screws of the MMI 3G unit cover
(Fig. 59). Remove the MMI 3G unit.
Fig.58
Fig.59
15
Fig.60
A7 4G, A6 4G
Climate control needs tob e removed by using suitable tools (Fig. 61). Loosen the screw of the MMI 3G
head unit (Fig. 62). Remove the MMI 3G unit of the center console.
Fig.61
Fig.62
Fig.63
Connect the video loom to the MMI 3G unit – FAKRA GREEN (Fig. 64).
Fig.64
NOTE: In case the vehicle is factory fitted with DVD-changer (e.g. A8 4H, A7 4G) the
video loom has to be connected to the DVD-changer.
Fig.65
Fig.66
16
Coding
After installation the system needs to be coded. Please contact an Audi dealer.
In order to code the vehicle system you need to choose the Self-Diagnosis. Please complete the coding
step by step as shown on images below.
Address 19
Vehicle Self-Diagnosis
Address 19 Diagnostic interface
Coding
Coding list
TV-Tuner needs to be set from not coded to coded - confirmation
17
USB-connection
Connecting of USB-memory sticks or hard disc drives (HDD)
MP3 music / video via USB
The whole memory capacity (Audio + Video) is up to 40GB - Format FAT32
NOTE: Only for hard drives with current consumption not more than 500mA - it's necessary
to have an external power supply with capacity over 500mA.
Root directory for the complete USB source (audio + video):
Up to 95 entries can be stored within the root directory. Each entry can include another
95 entries.
NOTE: Entries consists of single files as well as directories.
Supported audio format: *.mp3, *.wav
Supported video format: *.mpg; *.dat; *.vob; *.avi (MPEG4 ASP, XviD, DivX4.0/5.0/6.0)
Files will be filtered autom. – In USB audio mode only audio files will be displayed. In USB
video mode only video files will be displayed.
Last-Position-Memory:
-
For music files - the last listen track will start again from the beginning
For video files - will start again directly where the video has been stopped playing
TV Recording
NOTE: In order to record TV an USB source has to be connected. The source need to have
enough capacity for recording.
Recording capacity 3h with an 5GB USB-memory
TV recording format: *.mpg
18
Control elements
Multifunctional steering wheel
By pushing the MODE/ARROW button
you will reach the TV menu (Fig. 67, 68).
By using the SCROLL
you will select the single channels. Push the SCROLL for selecting the
channel. Volume adjustment will be done with the SCROLL on the right hand side.
Example A5 8T
Fig. 67
Example A8 4H
Fig. 68
Driver information system
The FISCUBE channels will be displayed within the driver information system.
Example A5 8T
Example A8 4H
Fig.69
Fig.70
19
MMI operation panel
OEM-menu driven operation by using the MMI panel.
After pressing the button MEDIA or CD/TV (Fig. 71, 72) the TV source can be selected. After that the
FISCUBE can controlled by using the rotate controller
as well as the control key
(Fig. 74).
Example MMI 2G/ MMI 3G
Fig.71
Fig.72
Example A8 4H
Fig.73
20
Fig.74
Start Up
Start up will be displayed in the following on MMI 3G. It is the same procedure for
MMI 2G as well as MMI 3G Plus.
1.
Push the MEDIA button – TV-Tuner needs to be selected (Fig. 76).
Fig.75
2.
Fig.76
Scroll down to…99 SETUP > selecting
Media
Programme
99 --99 Record
99 Setup
99 USB-Audio
99 USB-Video
12:00
Fig.77
Push knob AGAIN >…
3.
Select REGION & LANGUAGE >
Media
Programme
1 Exit Setup
2 Region&Langu
3 Autoscan
4 Vol +
5 Vol 12:00
Fig.78
Push knob AGAIN >…
21
4.
Select REGION (e.g. GERMANY)
Media
Programme
Finland
France
Germany
…
12:00
Fig.79
Push knob AGAIN >…
5.
Select LANGUAGE (e.g. GERMAN)
Media
Programme
Finnisch
French
German
Indonesian
12:00
Fig.80
Push knob AGAIN >…
6.
Select 99 SETUP >
Media
Programme
99 --99 Record
99 Setup
99 USB-Audio
99 USB-Video
12:00
Fig.81
Push knob AGAIN >…
22
7.
Select AUTOSCAN > Search will start automatically
Media
Programme
1 Exit Setup
2 Region&Langu
3 Autoscan
4 Vol +
5 Vol 12:00
Fig.82
When auto search has finished the system will switch the first channel.
Push knob AGAIN >…
8.
Select 99 SETUP >
Media
Programme
99 --99 Record
99 Setup
99 USB-Audio
99 USB-Video
12:00
Fig.83
Push knob AGAIN >…
9.
Select VOL + > Set the volume to the same level of the radio or other sources of the vehicle.
Media
Programme
1 Exit Setup
2 Region&Langu
3 Autoscan
4 Vol +
5 Vol 12:00
Fig.84
Leave the settings through the menu EXIT SETUP.
23
Operation instruction MMI 2G
Push the MEDIA or CD/TV button – TV-Tuner needs to be selected (Fig. 86).
TV
Quelle
CD
Audi music interface
TV
Externe AV Quelle 1
Externe AV Quelle 2
12:00
Fig.85
Fig.86
Channel list
Single channels can be selected of the channel list by using the knob (Fig. 87).
TV
WDR Köln
Kabel eins
N24
ProSieben
SAT.1
12:00
Fig.87
Manual channel selection
Press the buttons TV CONTROL > SEEK DOWN or SEEK UP. While using the knob you can switch
between the single channels (Fig. 88).
TV
ProSieben
Sender
vor
Manuell
12:00
Fig.88
24
TV Recording
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 RECORD.
> Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed
(Fig. 90).
TV
99 ---
99 Record
99 Setup
99 USB-Audio
99 USB-Video
REC
12:00
Fig.89
Fig.90
Select 99 RECORD again in order to STOP recording. The record will be stored within directory
RECORDED_TV.
Playing TV records
Select TV source > scroll down to > 99 USB-VIDEO > selecting
Push knob AGAIN >…> Select directory RECORDED_TV … >
Push knob AGAIN >…> Select the recorded file you want to play (Fig. 93).
TV
TV
99 --99 Record
99 Setup
99 USB-Audio
TV
..
Video 1
Video 2
99 USB-Video
Recorded_TV
12:00
12:00
Fig.91
Fig.92
TV
TV
..
Aufnahme 1
Aufnahme 2
Aufnahme 3
12:00
Fig.93
25
Store TV channels as a favorite
1. Option: Select channel and press MEMORY. Select a suitable position and confirm by using the
knob again (Fig. 95).
TV
Speicher
TV
Speicher
N24 speichern
WDR Köln
1:
2: Hier N24 speichern
3:
4:
5:
Kabel eins
N24
ProSieben
SAT.1
12:00
12:00
Fig.94
Fig.95
2. Option: Select channel and press TV CONTROL > STORE. Select a suitable position and
confirm by using the knob again (Fig. 97).
TV
ProSieben
ProSieben speichern
1:
2: Hier ProSieben speichern
3:
4:
5:
Speichern
Manuell
TV
Speicher
12:00
12:00
Fig.96
Fig.97
Teletext TXT
While watching TV press TV CONTROL > TT (Fig. 98). Select a teletext site by using the knob.
Turning SLOW
Turning FAST
– Teletext will switch in single numbers
– Teletext will switch in numbers of 100
NOTE: You are not able to enter teletext numbers.
TV
ARD
100
ARD Text
TT
317
WM-Vergabe: Nun keine Untersuchung…
Plusminus: u.a zu Atomausstieg
USA Reise: Merkel trifft Obama..
217
604
109
100
Teletext
Manuell
15.10 Sturm der Liebe . . .
16.00 Tagesschau UT
16.10 Sportschau live . . .
321
-
+
12:00
Fig.98
Fig.99
26
EPG Electronic Program Guide
While watching TV press TV CONTROL > EGP (Fig. 100).
NOTE: The display of EPG information could take a while. The channels will be refreshed step by step.
EPG information can only be displayed if available.
TV
EP
G
ZDF
Manuell
Program List
2011/6/17 08:20:32
0019 Das Erste
0020 Tele 5
0021 QVC
0022 DAS VIERT
0023 Channel21/E
0024 RTL HH SH
0025RTL2
0026 SRTL
Programminformation
12:00
Fig.100
Fig.101
MP3 Music
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 USB-AUDIO
>Select 99 USB-AUDIO … >
TV
99 --99 Record
99 Setup
99 USB-Audio
99 USB-Video
12:00
Fig.102
Push knob AGAIN >…
>Select DIRECTORY or MUSIC FILE for playing (Fig. 103).
TV
TV
..
21 – Herbert Grönemeyer –
22 – Jennifer Lopez –
23 – Bon Jovi –
24 – Lady Gaga –
12:00
Fig.103
27
NOTE: With menu
..
you will step back to the previous directory.
Display of track information as well as interpret (Fig. 104)
00:10/04:03
Er gehört zu mir
Marianne Rosenberg
Music
Fig.104
Manual selecting of music files
While listening to the music press the buttons TV CONTROL > SEEK DOWN or SEEK UP. While using
the knob the next or previous file can be selected (Fig. 105).
TV
ProSieben
Sender
vor
Manuell
12:00
Fig.105
Music fast forward/ fast backward
While listening to the music press the buttons TV CONTROL > MANUAL DOWN or MANUAL UP.
While using the knob the needed speed can be selected (Fig. 106).
2x – 4x – 8x – 20x
TV
ProSieben
Manuell
vor
Manuell
12:00
Fig.106
28
Video
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 USB-VIDEO > selecting … >
Push knob AGAIN >…
> Select DIRECTORY or VIDEO FILE for playing (Fig. 108).
TV
TV
99 --99 Record
99 Setup
99 USB-Audio
TV
99 USB-Video
Titanic
Fight Club
..
Forrest Gump
Der Pate II
12:00
12:00
Fig.107
NOTE: With menu
..
Fig.108
you will step back to the previous directory.
Manual selecting of video files
While watching video press the buttons TV CONTROL > SEEK DOWN or SEEK UP. While using the
knob the next or previous video file can be selected. (Fig. 109).
TV
ProSieben
Sender
vor
Manuell
NOTE:
12:00
Fig.109
Only video files within the same directory can be selected.
29
Video fast forward/ fast backward
While watching video press the buttons TV CONTROL > MANUAL DOWN or MANUAL UP. While
using the knob the needed speed can be selected (Fig. 110).
2x – 4x – 8x – 20x
TV
ProSieben
Manuell
vor
Manuell
12:00
Fig.110
Setup
Select TV source > scroll down to > 99 SETUP > selecting
The following settings can be done (Fig. 112)
Region & Language – Selecting region + language
Autoscan –search for available channels
Vol+ – volume up
Vol- – volume down
Aspect Ratio – selecting picture size
Reset – restart of the FISCUBE device
TV
TV
99 ---
Exit Setup
99 Record
Region&Langu
99 Setup
99 USB-Audio
Autoscan
Vol +
99 USB-Video
Vol -
12:00
12:00
Fig.111
Fig.112
30
Settings
Within the TV mode press the SETUP button.
The following settings can be done (Fig. 114)
Brightness/ Contrast/ Color
TV
Helligkeit
Kontrast
Farbe
Tint
Mehrkanal
TV-Norm
12:00
Fig.113
Fig.114
Example Brightness
Setup TV
Helligkeit
min
max
12:00
Fig.115
Aspect Ratio
In case the image is cut please select the menu 99-SETUP > ASPECT RATIO and choose the suitable
picture size (available from FISCUBE software-Index 1.17).
TV
TV
Exit Setup
Region&Langu
…
4:3
16:9
OFF
Aspect Ratio
12:00
12:00
Fig.116
Fig.117
31
Operating instruction MMI 3G
Push the MEDIA button – TV-Tuner needs to be selected (Fig. 119).
Fig.118
Fig.119
Channel list
Single channels can be selected of the channel list by using the knob (Fig. 120).
Media
Programme
WDR Köln
kabel eins
N24
ProSieben
SAT.1
12:00
Fig.120
Manual channel selection
1. Option: Press the buttons TV CONTROL > CH. While using the knob you can switch between the
single channels (Fig. 121)
2. Option: Press the buttons TV CONTROL > Symbol
or
. While using the knob you can
switch between the single channels (Fig. 122).
Media
Media
ProSieben
ProSieben
CH
Manuell
12:00
Fig.121
Manuell
32
12:00
Fig.122
TV Recording
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 RECORD.
> Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed
(Fig. 124).
Media
Programme
99 ---
99 Record
99 Setup
99 USB-Audio
99 USB-Video
REC
12:00
Fig.123
Fig.124
Select 99 RECORD again in order to STOP recording. The record will be stored within directory
RECORDED_TV.
Playing TV records
Select TV source > scroll down to > 99 USB-VIDEO > selecting
Push knob AGAIN >…> Select directory RECORDED_TV … >
Push knob AGAIN >…> Select the recorded file you want to play (Fig. 127).
Media
Media
Programme
Programme
99 --99 Record
99 Setup
99 USB-Audio
TV
…
Video 1
Video 2
99 USB-Video
Recorded_TV
12:00
12:00
Fig.125
Fig.126
Media
Programme
TV
…
Aufnahme 1
Aufnahme 2
Aufnahme 3
12:00
Fig.127
33
Store TV channels as a favorite
Select channel and press MEMORY. Select a suitable position and confirm by using the knob again
(Fig. 129).
Media
Speicher
Media
Speicher
Programme
N24 speichern
1:
2: Hier N24 speichern
3:
4:
5:
WDR Köln
kabel eins
N24
ProSieben
SAT.1
12:00
12:00
Fig.128
Fig.129
Teletext TXT
While watching TV press TV CONTROL > TT (Fig. 130). Select a teletext site by using the knob.
Turning SLOW
Turning FAST
– Teletext will switch in single numbers
– Teletext will switch in numbers of 100
NOTE: You are not able to enter teletext numbers.
Media
ProSieben
100
ARD Text
TT
15.10 Sturm der Liebe . . .
16.00 Tagesschau UT
16.10 Sportschau live . . .
317
WM-Vergabe: Nun keine Untersuchung…
Plusminus: u.a zu Atomausstieg
USA Reise: Merkel trifft Obama..
217
604
109
100
321
-
+
Teletext
Manuell
12:00
Fig.130
Fig.131
34
EPG Electronic Program Guide
While watching TV press TV CONTROL > EGP (Fig. 132).
NOTE: The display of EPG information could take a while. The channels will be refreshed step by step.
EPG information can only be displayed if available.
Media
TV EPG
ProSieben
ZDF
12:00 Serie…
15:30
3sat
16:45 Spielfilm…
17:30
EPG
Programminfos
12:00
Manuell
Manuell
Fig.132
12:00
MP3 Music
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 USB-AUDIO
>Select 99 USB-AUDIO … >
Media
Programme
99 --99 Record
99 Setup
99 USB-Audio
99 USB-Video
12:00
Fig.134
Push knob AGAIN >…
>Select DIRECTORY or MUSIC FILE for playing (Fig. 135).
Media
Programme
TV
..
21 – Herbert Grönemeyer –
22 – Jennifer Lopez –
23 – Bon Jovi –
24 – Lady Gaga –
12:00
Fig.135
35
Fig.133
NOTE: With menu
..
you will step back to the previous directory.
Display of track information as well as interpret (Fig. 136)
Media
Programme
00:10/04:03
Er gehört zu mir
Marianne Rosenberg
Music
12:00
Fig.136
Manual selecting of music files
While listening to the music press TV CONTROL > Symbol
previous file can be selected (Fig. 137).
or
. While using the knob the next or
Media
ProSieben
12:00
Manuell
Fig.137
Music fast forward/ fast backward
While listening to the music press TV CONTROL > CH. While using the knob the needed speed can be
selected (Fig. 138).
2x – 4x – 8x – 20x
Media
ProSieben
CH
Manuell
12:00
Fig.138
36
Video
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 USB-VIDEO > selecting … >
Push knob AGAIN >…
> Select DIRECTORY or VIDEO FILE for playing (Fig. 140).
Media
Media
Programme
Programme
TV
..
Forrest Gump
Der Pate II
Titanic
Fight Club
99 --99 Record
99 Setup
99 USB-Audio
99 USB-Video
12:00
12:00
Fig.139
NOTE: With menu
..
Fig.140
you will step back to the previous directory.
Manual selecting of video files
While watching video press TV CONTROL > Symbol
previous video file can be selected (Fig. 141).
or
. While using the knob the next or
Media
ProSieben
Manuell
NOTE:
12:00
Fig.141
Only video files within the same directory can be selected.
37
Video fast forward/ fast backward
While watching video press TV CONTROL > CH. While using the knob the needed speed can be
selected (Fig. 142).
2x – 4x – 8x – 20x
Media
ProSieben
CH
12:00
Manuell
Fig.142
Setup
Select TV source > scroll down to > 99 SETUP > selecting
The following settings can be done (Fig. 144)
Region & Language – Selecting region + language
Autoscan –search for available channels
Vol+ – volume up
Vol- – volume down
Aspect Ratio – selecting picture size
Reset – restart of the FISCUBE device
Media
Media
Programme
Programme
99 --99 Record
Exit Setup
Region&Langu
Autoscan
Vol +
Vol -
99 Setup
99 USB-Audio
99 USB-Video
12:00
12:00
Fig.143
Fig.144
38
Settings
Within the TV mode press the SETUP button.
The following settings can be done (Fig. 146)
Brightness/ Contrast/ Color
Setup TV
Helligkeit
Kontrast
Farbe
Tint
Mehrkanal
TV-Norm
12:00
Fig.145
Fig.146
Example Brightness
Setup TV
Helligkeit
min
Manuell
max
12:00
Fig.147
Aspect Ratio
In case the image is cut please select the menu 99-SETUP > ASPECT RATIO and choose the suitable
picture size (available from FISCUBE software-Index 1.17).
Media
Media
Programme
Programme
Exit Setup
Region&Langu
…
4:3
16:9
OFF
Aspect Ratio
12:00
12:00
Fig.148
Fig.149
39
Operating instruction MMI 3G Plus
Push the MEDIA button – TV-Tuner needs to be selected (Fig. 151).
Media
Quelle
Jukebox
Leer
Leer
Nicht verbunden
TV Tuner
Fig.150
Fig.151
Channel list
Single channels can be selected of the channel list by using the knob (Fig. 152).
Speicher
Quelle
Media
ZDF
3sat
Neo/KiKa
ZDFinfokanal
Bayerisches FS
MDR Fernsehen
Einstellungen
Funktionen
Fig.152
Manual channel selection
Select menu FUNCTIONS.
While using the options SEEK DOWN or SEEK UP you can switch between the single channels
(Fig. 153).
Symbol
Media
Media
0:00 – 0:00
Phoenix
Phoenix
VOR ORT
0:00 – 0:00
VOR ORT
EPG
EPG
Suchlauf zurück
Suchlauf vor
Funktionen
Funktionen
Fig.153
Fig.154
40
TV Recording
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 RECORD.
> Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed
(Fig. 156).
Speicher
Quelle
Media
ZDF
3sat
Neo/KiKa
99 ---
99 Record
99 Setup
REC
Einstellungen
Funktionen
Fig.155
Fig.156
Select 99 RECORD again in order to STOP recording. The record will be stored within directory
RECORDED_TV.
Playing TV records
Select TV source > scroll down to > 99 USB-VIDEO > selecting
Push knob AGAIN >…> Select directory RECORDED_TV … >
Push knob AGAIN >…> Select the recorded file you want to play (Fig. 159).
Speicher
Media
Quelle
Speicher
99 --99 Record
Media
TV
99 Setup
..
Video 1
99 USB-Audio
Video 2
99 USB-Video
Recorded_TV
Einstellungen
Funktionen
Funktionen
Fig.157
Speicher
Media
Einstellungen
Fig.158
Quelle
TV
..
Aufnahme 1
Aufnahme 2
Aufnahme 3
Funktionen
Quelle
Einstellungen
Fig.159
41
Store TV channels as a favorite
Select the menu FUNCTIONS. Select STORE CHANNEL. Select a suitable position and confirm by
using the knob again (Fig. 161).
Media
Speicher
Media
0:00 – 0:00
Phoenix
1
VOR ORT
2
EPG
Sender speichern
3 Phoenix hier speichern
4
5
Funktionen
Fig.160
Fig.161
Teletext TXT
While watching TV press FUNCTIONS > TELETEXT (Fig. 162). Select a teletext site by using the knob.
Turning SLOW
Turning FAST
– Teletext will switch in single numbers
– Teletext will switch in numbers of 100
NOTE: You are not able to enter teletext numbers.
Media
ARD
100
0:00 – 0:00
ARD Text
Sturm der
EPG
Teletext
15.10 Sturm der Liebe . . .
16.00 Tagesschau UT
16.10 Sportschau live . . .
317
WM-Vergabe: Nun keine Untersuchung…
Plusminus: u.a zu Atomausstieg
604
USA Reise: Merkel trifft Obama.. 109
217
100
321
-
+
Funktionen
Fig.162
Fig.163
42
EPG Electronic Program Guide
While watching TV press FUNCTIONS > EGP (Fig. 164).
NOTE: The display of EPG information could take a while. The channels will be refreshed step by step.
EPG information can only be displayed if available.
Media
Speicher
Quelle
ZDF
0:00 – 0:00
Phoenix
12:00 Serie…
VOR ORT
15:30
EPG
3sat
EPG
16:45 Spielfilm…
17:30
EPG
Funktionen
Funktionen
Einstellungen
Fig.164
Fig.165
MP3 Music
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 USB-AUDIO
>Select 99 USB-AUDIO … > (Fig. 167).
Speicher
Media
Quelle
Speicher
Media
WDR Köln
TV
99 --99 Record
..
99 Setup
22 – Jennifer Lopez –
99 USB-Audio
23 – Bon Jovi –
99 USB-Video
24 Lady Gaga –
Quelle
21 – Herbert Grönemeyer –
Einstellungen
Funktionen
Funktionen
Fig.166
NOTE: With menu
..
Einstellungen
Fig.167
you will step back to the previous directory.
Display of track information as well as interpret (Fig. 168)
00:10/04:03
Er gehört zu mir Hitmix
Marianne Rosenberg
Music
Fig.168
43
Manual selecting of music files
While listening to the music press FUNCTIONS > SEEK DOWN or SEEK UP in order to select the next
or previous music file (Fig. 169).
Symbol
Media
0:00 – 0:00
Phoenix
VOR ORT
EPG
Suchlauf zurück
Funktionen
Fig.169
Video
USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.
Select TV source > scroll down to > 99 USB-VIDEO > selecting … >
Push knob AGAIN >…
> Select DIRECTORY or VIDEO FILE for playing (Fig.171).
Speicher
Quelle
Media
Speicher
99 --99 Record
TV
99 Setup
Forrest Gump
99 USB-Audio
Der Pate II
99 USB-Video
Titanic
Media
Quelle
..
Fight Club
Funktionen
Einstellungen
Funktionen
Fig.170
NOTE: With menu
..
Einstellungen
Fig.171
you will step back to the previous directory.
44
Manual selecting of video files
While watching video press FUNCTIONS > SEEK DOWN or SEEK UP in order to select the next or
previous video file (Fig. 172).
Symbol
Media
0:00 – 0:00
Phoenix
VOR ORT
EPG
Suchlauf zurück
Funktionen
Fig.172
NOTE:
Only video files within the same directory can be selected.
Setup
Select TV source > scroll down to > 99 SETUP > selecting
The following settings can be done (Fig. 174)
Region & Language – Selecting region + language
Autoscan –search for available channels
Vol+ – volume up
Vol- – volume down
Aspect Ratio – selecting picture size
Reset – restart of the FISCUBE device
Speicher
Media
Quelle
Speicher
Media
ARD
Exit Setup
WDR Köln
Region & Language
99 --99 Record
Autoscan
99 Setup
Vol –
99 USB-Audio
Reset
Funktionen
Quelle
Vol +
Einstellungen
Funktionen
Fig.173
Einstellungen
Fig.174
45
Settings
Within the TV mode press the SETUP button.
The following settings can be done (Fig. 176)
Brightness/ Contrast/ Color
Example Brigtness
Media
Media
Einstellungen
Helligkeit
Helligkeit
Kontrast
Farbe
Tint
Mehrkanalton
TV-Norm
min
max
Einstellungen
Einstellungen
Fig.175
Fig.176
Aspect Ratio
In case the image is cut please select the menu 99-SETUP > ASPECT RATIO and choose the suitable
picture size (available from FISCUBE software-Index 1.17).
Speicher
Media
Quelle
Speicher
Exit Setup
4:3
Region & Language
16:9
…
Media
Quelle
OFF
…
Aspect Ratio
Funktionen
Einstellungen
Funktionen
Fig.177
Einstellungen
Fig.178
46
Additional video input 2G/ 3G/ 3GPlus
Note: No processing of audio signals – only video signals
Remove the housing of the 18-pole connector of the FISCUBE loom. Integrate the single PIN’s of the
RCA -connector (Kufatec article-ID 35570) (Fig. 179).
PIN 2 – Video ground (Black)
PIN 1 – Video (Yellow)
The video source needs to be selected manually through the AV source on the MMI panel.
NOTE: No auto switch available by choosing the rear gear.
Media
Quelle
Jukebox
Leer
Leer
Nicht verbunden
TV Tuner
AV
Externer AV Eingang
Fig.179
Fig.180
Video output
For connecting to additional screens within the vehicle:
e.g. Head rest screens, Overhead screens
NOTE: No processing of audio signals – ONLY VIDEO signals
Join the adapter article-ID. 38392 with the FAKRA video loom of the FISCUBE wiring.
The RCA connector can connected to an additional screen.
NOTE: Depending on the number of additional screens a video booster may be required.
Fig.181
47
Connection in case of factory fitted analog TV MMI 2G
For vehicles with factory fitted analog TV tuner
NOTE: Not needed for MMI 3G/ 3G Plus
Location analog TV Tuner
The TV tuner is located with the infotainment rack of the vehicle (Fig. 182).
Item number 38323-2
(Fig. 183).
Fig.182
Fig.183
Factory fitted analog tuner needs to be removed.
Join wiring 38323-2 with the connections of the factory fitted TV-Tuner.
TV Tuner connector Red
FAKRA GREEN
Fig.184
Fig.185
Fig.186
Join the 18-pole connector of the loom 38323-2 as well as the original fiber optical connector (TV tuner)
to the interface (Fig. 186).
48
Replacement Displayinterface
NOTE: before replacing the displayinterface all MMI components needs to be updated to the
latest software index. Please get in contact with your local Audi dealer.
Neede update CD
Model
CD-part number
A6 4F, A8 4E, Q7 4L
4L0 998 961
A4 8K, A5 8T
8K0 998 961
Procedure
Disconnect battery
replace interface
connect battery again
Turn ignition on
remove component protection (Get in contact with your local Audi
dealer – online connection is required)
Address 07
remove component protection (In some cases the coding machine is
asking a blocking time – These time needs to be elapsed completely)
Additional coding Address 07
Country code, Vehicle – Note down the values of the old interface
Copy the values into
the new interface
Additional adaption channels
Channel 01 – MMI device list (ACC, AAS, PDC, MFSW, TPMS, RVC)
Channel 02 – Options within CAR menu (Left hand drive, battery status)
Channel 11 – Additional MMI features (logbook, clima comfort, aux heating)
Channel 12 – Phone version (1 for PR-Nr. 9ZW
--- 2 for PR-Nr. 9ZF)
Channel 13 – Protocol setting: 0 = A6, A8, Q7 /
8191 = A4 8K, A5 8T
Channel 111 – MMI start for activating the configurated values
NOTE: Kufatec GmbH & Co. KG has got no influence in deleting the component protection. In
case it is not possible to delete the protection please get in contact with [email protected].
49