AUSTRALIAN MONITOR | KA800 | Technical information | AUSTRALIAN MONITOR KA800 Technical information

AUSTRALIAN MONITOR KA800 Technical information
CATALOGUE 106
Melbourne
Sydney
Brisbane
Coffs Harbour
Ulverstone
(03) 9776 9222
(02) 9755 5026
(07) 3290 2410
(02) 6651 6100
(03) 6425 6235
www.laceys.tv
sales@laceys.tv
TABLE OF CONTENTS
ANTENNAS & MOUNTING HARDWARE
- Log Periodic
- High Performance Yagis
- Radio Services
- Combination
- Misc. Yagis
- Antenna Hardware & Accessories
- Very High Frequency
- Phased Array
- Caravan Kits & Accessories
AMPLIFIERS & MODULATORS
- Amplifiers
- Power Injectors
- Masthead Amplifiers
- Power Supplies for Amplifiers
- Distribution Amplifiers
- Modulators, Mono Audio
2
AV LEADS, CABLE, CONNECTORS & HAND TOOLS
- HDMI Accessories
- Adapters &n Connectors
- Outlet Plates & Mounting Hardware
- A/V Accessories & Switches
- Cable Installation
- Baluns
- Cable & Leads
- Hand Tools
- Multi-purpose Work Clothes
DIPLEXERS, FILTERS & PASSIVES
- Splitters / Power Dividers
- Attenuators
- Taps and Couplers
- Filters & Isolators
INSTRUMENTS
- Test Instruments
- Noise Generators
- Budget Instruments &
Accessories
- Instruments Batteries & Chargers
- Technical Information
MOUNTING BRACKETS & CABINETS
- Misc. Brackets: TV, Flat
Panel and Speaker
COMMERCIAL MATV, SMATV & CCTV
- Fracarro K Series
- IPTV Server Solutions
- Fibre Optic Solutions
- Digital To Analogue
Conversion
- Multiswitches, Taps, Splitters
& Amplifiers
- CATV Products
- Digital Modulation, Headends
- Modulator Rack
SATELLITE EQUIPMENT
- Satellite Hardware
- LNBFs
- Satellite Accessories &
Receivers
- Multifeed LNB Holder
5
6
- Cabinets
- Satellite Television Dishes
3
4
- Diplexers & Multiplexers
- LED/LCD/Plasma Brackets
1
RECEIVERS
- Terrestrial Television Receivers
- Cable/QAM Television Receivers
- Satellite & VAST Television
Receivers
- Portable High Definition LCD
Television/ Monitor
7
8
9
Catalogue 106
3
Introduction
Laceys.tv Cat.106 marks our 27th year in business. Thanks to
the support of professional installers we have grown into one of
Australia’s largest reception solution suppliers, contributing to
the delivery of stable Digital TV signals in many places.
TERMS OF TRADE
Analogue switchover is in progress and within months most
television broadcasts in Australia will be Digital. Robust high
picture quality and wide screen Digital TV is now available to
everyone, with receiver prices in real terms that are similar to
the cost of an analogue TV ten years ago. Quality antennas
and signal distribution products remain important to ensure
that a receiver has as much threshold above drop out or
the cliff edge as possible, so that it will work reliably for the
longer term.
PAYMENT:
Laceys.tv accept Cash, Cheque, Visa/Mastercard. Strictly
30 day credit account terms are available to approved
customers who maintain their accounts within terms.
Shortly after the last analogue transmitters have been switched
off, an important wave of channel re-organization will
affect our industry. This is a result of the Government’s Digital
Dividend, where the channels from 52 to 69 have been sold for
Long Term Evolution or 4G communication use for devices like
smart phones. The new digital channels will be organized into
one of 5 new groups of adjacent channels, nationally. Details
of the plans can be downloaded from http://www.acma.gov.
au/WEB/STANDARD/pc=PC_312417 Documents at the bottom
of the list are the latest.
MINIMUMS:
No minimum order policy applies.
The television engineering community is concerned at the
potential for interference from such mobile computing devices
as they are wideband and relatively high power transmitters,
that will operate close to the remaining TV frequencies in
some places.
DISPUTES OR CLAIMS:
Must be notified within 7 days.
This is likely to create need for more selective or narrow
bandwidth antennas, an area where Laceys.tv has broad
experience with our friends Fracarro. In this catalogue
antennas for these new channel groups have been labelled
and colour coded to assist their identification.
OWNERSHIP:
Goods remain the property of Peter C. Lacey Services Pty. Ltd.
trading as Laceys.tv until paid for in full.
FREIGHT:
Laceys.tv ship countrywide daily with a number of quality
delivery services. Express Post is also available.
INSURANCE:
Is the responsibility of the receiver.
RETURNS:
Are only accepted with a Return Authorisation Number, a
copy of our Invoice, within 14 days of invoice date and may
be subject to a 20% handling charge.
TECHNICAL INFORMATION is offered without liability.
PRICING may be subject to change without notice.
Laceys.tv is working with our suppliers to deliver solutions to LTE
interference and hope to have more news of solutions to the
challenging filter requirement as the day gets closer.
BEWARE OF SPECIFICATIONS:
Our gain figures can look tame when compared to those
quoted by competitors. As radio frequency performance
figures can be made under questionable circumstances or
even exaggerated, we strongly recommend customers make
their own measurements.
Peter Lacey,
Managing Director.
CONTACTS
Melbourne
(Head Office):
42 Brunel Road
Seaford, 3198
Victoria
Tel: (03) 9776 9222
Fax: (03) 9776 9766
Skype: laceys.tv
Sydney:
Brisbane:
Coffs Harbour:
Tasmania:
1/18 Alfred Road
Chipping Norton, 2170
New South Wales
Tel: (02) 9755 5026
Fax: (02) 9755 5027
1/65 Parramatta Road
Slacks Creek, 4127
Queensland
Tel: (07) 3290 2410
Fax: (07) 3290 2552
4/161 Orlando Street
Coffs Harbour, 2450
New South Wales
Tel: (02) 6651 6100
Fax: (02) 6651 7022
Shop 15 Westside S/C
Cnr Queen & Alice Street
Ulverstone, 7315
Tasmania
Tel: (03) 6425 6235
Fax: (03) 6425 5319
North West Victoria
& South Australia:
Allen Briant
Tel: 0488 198 509
North Queensland:
Tim Bennett
Tel: 0429 608 014
Website: www.laceys.tv
E-mail: sales@laceys.tv
Peter C. Lacey Services Pty. Ltd. trading as Laceys.tv ABN 59769658785
Copyright © 2012 Peter C. Lacey Services Pty. Ltd.
4
Catalogue 106
Errors and Omissions Excepted.
Produced in Australia.
1
Contents
Antennas &
Mounting
Hardware
Log Periodic
Misc. UHF Yagis
Direct Cable Connection
6–7
F Connector Terminated
8–10
Combination
Full Band
18
Corner Reflector
18
Pre-assembled Fracarro BLU Series
19
20
Cross Polarity
11
Pre-assembled Fracarro OMEGA Series
Multiband
11
UHF Phased Array
Bird Spikes
11
Radio Services
Very High Frequency
20–21
FM Band2 88–100MHz
22
Multiband
12
DAB+ Half Band3
22
Single Channel B3
12
Set Top Antennas
22
All Band3
13
Antenna Mounting Hardware & Accessories
14
Mounts, Masts , Chimney Kits, Brackets,
Flashing Kits
UHF High Performance Yagis
Sigma Series
Nuts, Bolts & Washers
VHF + UHF High Performance Yagi
Sigma Combo
15
28
Guying Hardware
28–29
Caravan Kits & Accessories
Narrow Band UHF Yagi Antennas
10 Element
15–16
20 Element
17
23–27
30
Catalogue 106
5
Antennas & Mounting Hardware
LOG PERIODIC
Fracarro use a balance of precision design and quality materials to produce a superior antenna, the only one that carries the
distinctive FR trademark and the first true Log Periodic antenna for television. Now also available with F connector and a unique
weatherproof boot, features include no loss cable connections, nose cones that keep weather out permanently, secure dual
vee block mount that fits masting from 26mmØ to 60mmØ, black plastic components for long UV life and concealed cable
inside the boom of the antenna. Suits horizontal or vertical polarized signals. All Fracarro Log Periodic Antennas are naturally
75Ω and ship in carton quantities of 20 pieces.
DIRECT CABLE CONNECTION LOG PERIODICS
LP345HV
UHF
Channels:
VHF: 6–12 b3, UHF: 28–69 b4&5
Gain:
VHF: 9dB, UHF: 11dB
F/B Ratio:
VHF: 24dB, UHF: 32dB
Boom length:
111cm
VHF
Tech Tip:
How do the Fracarro logs work with FM? OK! Whilst nothing works as well as a dedicated band 2 FM antenna, an antenna like the LP34 does an acceptable
job of FM for most people. A proper DAB+ antenna will be vertically polarized, but again Fracarro’s logs can do the job.
LP34HV
UHF
Channels:
VHF: 6–12 b3, UHF: 28–40 b4&5
Gain:
VHF: 9dB, UHF: 10dB
F/B Ratio:
VHF: 21dB, UHF: 25dB
Boom length:
111cm
6
Catalogue 106
VHF
Antennas & Mounting Hardware
mini
LP345MHV
UHF
VHF
Channels:
VHF: 6–69 b3, UHF: 28–69 b4&5
Gain:
VHF: 8.5dB, UHF: 9.5dB
F/B Ratio:
VHF: 22dB, UHF: 30dB
Boom length:
72cm
Tech Tip:
Ideal antenna for caravans & mobile homes.
LPV345HV
UHF
VHF
Channels:
VHF: 6–12 b3, UHF: 28–69 b4&5
Gain:
VHF: 9dB, UHF: 11.5dB
F/B Ratio:
VHF: 24dB, UHF: 32dB
Boom length:
71cm
LP45HV
12
-30
-45
Gain ISO (dBi)
11
-60
10
-75
9
-90
8
-105
-15
0
15
0
-4
-8
-12
-16
-20
-24
-28
Channels:
28–69 b4&5
Gain:
10dB
F/B Ratio:
36dB
Boom length:
94cm
30
45
LP5HV
60
75
90
105
120
-120
7
135
-135
6
540 560 580 600 620 640 660 680 700 720 740 760 780 800 820 840 860 880 900
Frequency
150
-150
-165 180
165
(MHz)
Tech Tip:
Strong front to back ratio, flat frequency response across wide frequency ranges and better
impedance match make FR Log Periodic antennas an excellent choice for Digital TV.
Channels:
40–69 b5
Gain:
11dB
F/B Ratio:
36dB
Boom length:
94cm
Catalogue 106
7
Antennas & Mounting Hardware
F CONNECTOR TERMINATED LOG PERIODICS
LP345F
UHF
Channels:
VHF: 6–12 b3, UHF: 28–69 b4&5
Gain:
VHF: 9.5dB, UHF: 11dB
F/B Ratio:
VHF: 24dB, UHF: 32dB
Boom length:
115cm
VHF
-30
-45
LP34F
-60
-75
UHF
-90
-15
0
15
0
-4
-8
-12
-16
-20
-24
-28
30
45
60
75
90
105
-105
120
-120
135
-135
150
-150
-165 180
Channels:
VHF: 6–12 b3, UHF: 28–40 b4&5
Gain:
VHF: 9.5dB, UHF: 11dB
F/B Ratio:
VHF: 21dB, UHF: 25dB
Boom length:
115cm
VHF
mini F
LP345MF
UHF
Channels:
VHF: 6–12 b3, UHF: 28–69 b4&5
Gain:
VHF: 8.5dB, UHF: 9.5dB
F/B Ratio:
VHF: 22dB, UHF: 30dB
Boom length:
77cm
8
Catalogue 106
VHF
165
Antennas & Mounting Hardware
LPV345F
UHF
VHF
Channels:
VHF: 6–12 b3, UHF: 28–69 b4&5
Gain:
VHF: 9dB, UHF: 11.5dB
F/B Ratio:
VHF: 24dB, UHF: 32dB
Boom length:
75cm
LP3F
0 0
-15-15 0 0 15 15
-30-30
30 30
-4 -4
-45-45
45 45
-8 -8
-12-12
-60-60
60 60
-16-16
-20-20
-75-75
75 75
-24-24
-28-28
90 90
-90-90
1114
1013
12
9
11
810
79
8
6
7
5
6
45
34
3
2
2
160
170
180
190
200
470 480 490 500 510 520 530 540
Coming
Soon!
105105
-105
-105
120120
-120
-120
135135
-135
-135
150150
-150
-150
-165
165
-165180
180 165
210
220
230
240
550 560 570 580 590 600 610
Channels:
VHF: 6–12 b3
Gain:
9dB
F/B Ratio:
25dB
Boom Length:
65cm
block A
LP4F
14
-30
13
-45
Gain ISO (dBi)
12
11
-60
10
-75
9
8
-90
7
6
-15
0
15
0
-4
-8
-12
-16
-20
-24
-28
30
45
60
75
90
105
-105
5
3
2
470 480
120
-120
4
135
-135
490 500
510 520
530 540
Frequency
550 560 570
(MHz)
580 590
600 610
150
-150
-165 180
165
Channels:
28–39 b4
Gain:
10dB
F/B Ratio:
32dB
Boom Length:
65cm
Catalogue 106
9
Antennas & Mounting Hardware
LP45F
Channels:
28–69 b4&5
Gain:
11dB
F/B Ratio:
36dB
Boom length:
99cm
LP45NF
Channels:
28–69 b4&5
Gain:
11.5dB
F/B Ratio:
36dB
Boom length:
115cm
LP5F
Channels:
40–69 b4&5
Gain:
12dB
F/B Ratio:
36dB
Boom length:
99cm
10
Catalogue 106
Antennas & Mounting Hardware
COMBINATION
CROSS POLARITY
MULTIBAND
CDX13
AI18HD
Channels:
VHF: 2–12, UHF, 28–37, bands 1, 2, 3&4
Channels:
VHF: 6–12, UHF: 28–69 bands 3, 4 and 5
Connection:
75Ω F connector balun included
Connection:
75Ω F connector balun included
Boom length:
152cm
Boom length:
110cm
Carton Quantity: 10
Carton Quantity: 10
Combination cross polarized for both horizontal and
vertical signals.
AI23HD
UV13/2850
Channels:
VHF: 6–11, UHF: 28–50, bands 3 and 4 plus
Channels:
VHF: 2–12, UHF, 28–37, bands 1, 2, 3&4
Connection:
75Ω F type connection
Connection:
75Ω F connector balun included
Boom length:
140cm
Boom length:
203cm
Carton Quantity: 10
Carton Quantity: 1
UV19WB
AI30HD
Channels:
VHF: 6–12, UHF: 28–69, bands 3, 4 and 5
Channels:
VHF: 2–12, UHF, 28–37, bands 1, 2, 3&4
Connection:
75Ω F type connection
Connection:
75Ω F connector balun integrated
Boom length:
185cm
Boom length:
150cm
Carton Quantity: 1
Carton Quantity: 5
BIRD SPIKES
BIRDSPIKES
Keep birds off your antennas!
Thorny Devil Bird Spikes are the simplest, easiest and most effective way
to deter birds from roosting in undesirable areas. Can be glued, screwed,
nailed, sawn and drilled.
420mm(L) x 110mm(W) x 90mm(H)
Australian designed. Made from UV Resistant Polycarbonate.
Catalogue 106
11
Antennas & Mounting Hardware
VERY HIGH FREQUENCY
MULTIBAND VHF
SINGLE CHANNEL B1
4 element
AI6HD
4E2
4 element Au ch 0, 6.5dB gain, >18dB f/b.
4E3
4 element Au ch 1, 6.5dB gain, >18dB f/b.
SINGLE CHANNEL B3
Channels:
VHF: 2–12
Connection:
75Ω F connector balun included
Boom length:
101cm
4 element
Carton Quantity: 10
4DF
6 element
DL4
DL3
VHF: 0–12, 75Ω F connector balun included,
4–10dB gain.
DL4
VHF: 0–12, 75Ω F connector balun included,
5–11dB gain.
VHF Phased Array
4 element Au ch 6, 6.5dB gain, >18dB f/b.
6D
6 element Au ch 6, 9dB gain, 25dB f/b.
6E6
6 element Au ch 7, 9dB gain, 25dB f/b.
6E7
6 element Au ch 8, 9dB gain, 25dB f/b.
6E8
6 element Au ch 9, 9dB gain, 25dB f/b.
6H
6 element Au ch 10, 9dB gain, 25dB f/b.
6H1
6 element Au ch 11, 9dB gain, 25dB f/b.
6E12
6 element Au ch 12, 9dB gain, 25dB f/b.
11 element
CA16 vertical
CA8
Channels 6–12, phased array. Larger capture
area, picks up signal where yagis sometimes fail,
300Ω. 7–9.5dB gain.
block A
CA16
Channels 6–12, phased array. Twice the
CA8’s capture area for twice the gain, 300Ω.
12.5–15dB gain.
block A
11D
11 element Au ch 6, 12dB gain, 35dB f/b.
11E6
11 element Au ch 7, 12dB gain, 35dB f/b.
CA16GL
Gain Lifter, improve CA8 +4.5dB or CA16 +6.3dB
on channel 2.
11E7
11 element Au ch 8, 12dB gain, 35dB f/b.
11E8
11 element Au ch 9, 12dB gain, 35dB f/b.
11E9
11 element Au ch 9a, 12dB gain, 35dB f/b.
11H
11 element Au ch 10, 12dB gain, 35dB f/b.
11H1
11 element Au ch 11, 12dB gain, 35dB f/b.
11E12
11 element Au ch 12, 12dB gain, 35dB f/b.
Tech Tip:
Fracarro channel cut antennas provide substantial improvements in gain,
front to back ratio and beamwidth, providing results with Digital or Analogue TV
where other antennas fail.
12
Catalogue 106
Antennas & Mounting Hardware
ALL BAND3 VHF
BLV6F
BLV4F
VHF: 6–12, band 3
block A
Channels:
VHF: 6–12, band 3
75Ω F Type
Connection:
75Ω F Type
Connection:
Gain:
13dB
Gain:
11dB
F/B Ratio:
25dB
F/B Ratio:
20dB
Boom length:
149cm
Boom length:
64cm
BLV4F and BLV6F models include frequency optimised baluns.
-30
-15
-45
-45
-60
-75
-90
0
15
0
-4
-8
-12
-16
-20
-24
-28
14
30
12
60
75
90
105
-105
120
-120
10
150
-150
-165 180
-90
0
15
0
-4
-8
-12
-16
-20
-24
-28
11
45
10
60
75
90
165
105
-105
9
120
-120
8
135
-135
7
6
150
-150
-165 180
5
165
9
8
7
6
5
4
3
2
1
0
160
4
170
180
190
200
Frequency
180
190
200
210
220
230
210
220
230
240
(MHz)
240
(MHz)
ANT3100510
4E512F
Channels:
VHF: 6–12, band 3
75Ω F Type
Connection:
75Ω F Type
Gain:
7dB
Gain:
12dB
F/B Ratio:
16dB
F/B Ratio:
28dB
108cm
Boom length:
237cm
Channels:
VHF: 6–12, band 3
Connection:
Boom length:
170
Frequency
3
2
160
block A
12
30
11
135
-135
-75
13
45
Gain ISO (dBi)
-30
-15
-60
Gain ISO (dBi)
Channels:
block A
block A
6E512F
Channels:
VHF: 6–12, band 3
Connection:
75Ω F Type
Gain:
10dB
F/B Ratio:
18dB
Boom length:
181cm
block A
An all band 3 antenna can be
a high performance deep fringe antenna
or a low cost television solution
— your choice!
Catalogue 106
13
Antennas & Mounting Hardware
SIGMA SERIES UHF HIGH PERFORMANCE YAGIS
SIGMA6
SIGMA9
Channels:
21–69, bands 4 and 5
Channels:
21–69, bands 4 and 5
Gain:
17dBt
Gain:
18.5dB
F/B Ratio:
32dB
F/B Ratio:
32dB
Boom length:
92cm
Boom length:
130cm
Connection:
F Type
Connection:
F Type
A new range of terrestrial antennas unique in performance
and design, Fracarro Sigma is perfect for the reception of
Digital Terrestrial television signals.
Patented loop elements and double size corner reflectors
deliver high directivity with an almost total absence of sidelobes — excellent for reducing reception of reflections.
The highest gain Sigma antenna yet! Up to 18.5dB gain that
can be boosted even more with a Sigma PWR HD dipole.
Sigma antennas can be installed quickly and easily without
hand tools.
20
-30
Sigma antennas feature pre-assembled elements, reflectors
and mast clamp enabling tool free installation. F connector
balun and a unique weatherproof boot are standard. Unique
fibreglass reinforced polymer construction ensures physical
strength and long life.
Gain ISO (dBi)
18
-60
14
-75
12
-90
10
-30
Gain ISO (dBi)
17
-45
15
-60
13
-75
11
-90
-15
0
15
0
-4
-8
-12
-16
-20
-24
-28
45
60
75
90
105
120
-120
6
135
-135
150
-150
4
165
-165 180
480 510 540 570 600 630 660 690 720 750 780 810 840 860
(MHz)
30
45
60
75
90
9
105
-105
7
120
-120
5
135
-135
3
480 510 540 570 600 630 660 690 720 750 780 810 840 860
Frequency
SIGMAPWRHD
Channels:
150
-150
-165 180
165
(MHz)
Sigma Amplified Dipole
Active UHF Dipole. Perfect for weak signal areas, adds an
extra 16dB of gain electronically with minimal noise. High
signal level output can be helpful with signal distribution and
reduces the possibility of interference. Protected against
electrostatic discharges, an automatic passive switch ensures
operation continues even when power is not connected.
Impedance match is excellent and power consumption low.
Requires PS12DC or any 12 to 24V DC line supply @26mA.
21–69, bands 4 and 5
19
-30
Gain:
F/B Ratio:
Boom length:
Connection:
17dB
32dB
92cm
F Type
Gain ISO (dBi)
17
-45
15
-60
13
-75
11
-90
Catalogue 106
-15
0
15
0
-4
-8
-12
-16
-20
-24
-28
30
45
60
75
90
9
105
-105
7
120
-120
5
135
-135
3
480 510 540 570 600 630 660 690 720 750 780 810 840 860
Frequency
14
30
-105
8
Frequency
19
0
15
0
-4
-8
-12
-16
-20
-24
-28
-15
-45
16
(MHz)
150
-150
-165 180
165
Antennas & Mounting Hardware
VHF + UHF HIGH PERFORMANCE YAGI
The revolutionary loop technology applied to this antenna
allows the reception of both VHF and UHF bands with the
same performance as two separate antennas and the
outstanding physical strength of Sigma.
SIGMACOMBO
Sigma antennas can be installed quickly and easily without
hand tools.
UHF
Channels:
6–69, bands 3, 4 and 5
Gain:
VHF: 9dB, UHF: 16dB
F/B Ratio:
VHF: 20dB, UHF: 32dB
Boom length:
108cm
Connection:
F Type
VHF
NARROW BAND UHF YAGI ANTENNAS
These Fracarro yagi antennas ship in a compact
Knock Down carton that save on van space,
shipping costs and are straight forward to assemble.
51mm
Cartons are about the size of a fluorescent tube
and contain one antenna.
44mm
10 ELEMENT NARROW BAND UHF YAGIS
NEW F Connector models
10 element Fracarro channel grouped antennas that focus on particular groups of channels for better gain!
10F2734,
10F3546 &
10F4769
10F2734
Au ch. 28–35 15dB gain 25dB f/b ratio.
block B
10F3546
Au ch. 35–50 16dB gain 30dB f/b ratio.
block C, block D, block E
10F4769
Au ch. 49–69 14.3dB gain 25dB f/b ratio.
10F3546
10F4769
18
14
16
16
12
14
14
10
8
6
4
2
0
400
450
500
550
600
650
Frequency
700
750
(MHz)
800
850
900
Gain ISO (dBi)
18
Gain ISO (dBi)
Gain ISO (dBi)
10F2734
16
12
10
8
6
4
2
0
12
10
8
6
4
2
0
400
450
500
550
600
650
Frequency
700
750
(MHz)
800
850
900
400
450
500
550
600
650
Frequency
700
750
800
850
900
(MHz)
Catalogue 106
15
Antennas & Mounting Hardware
Narrow bandwidth Fracarro antennas that allow you to choose an antenna
with gain where you need it.
10 GAMMA,
10 DELTA,
10/800960
10 GAMMA/R
10 DELTA/R,
10/3539/R
10/4046/R
10/4753/R
10/5461/R
10/6269/R
16
10 GAMMA/R
Au ch. 20–31 11dB gain 24dB f/b ratio.
10 DELTA
Au ch. 24–36 11dB gain 20dB f/b ratio.
10 DELTA/R
Au ch. 24–36 11dB gain 24dB f/b ratio.
block B
10/3539/R
Au ch. 28–42 11dB gain 24dB f/b ratio.
block B, block C
10/4046/R
Au ch. 34–49 11dB gain 24dB f/b ratio.
block C, block D
10/4753/R
Au ch. 40–57 11dB gain 24dB f/b ratio.
10/5461/R
Au ch. 46–67 11dB gain 24dB f/b ratio.
10/6269/R
Au ch. 55–75 11dB gain 24dB f/b ratio.
10/860960
Special purpose 860-960MHz 8-10dB gain. Suitable for
communication and GSM purposes.
block B
Tech Tip:
To assist selecting a better UHF antenna, we reproduce gain vs. frequency and return
loss sweeps for narrow band Fracarro UHF antennas. Level shown in 5dB steps from
a 0dB reference point 1 line up from the bottom. Gain is the lower trace.
10 DELTA/R
10/3539/R
10/4046/R
10/4753/R
10/5461/R
10/6269/R
Catalogue 106
Antennas & Mounting Hardware
20 ELEMENT NARROW BAND UHF YAGIS
Tech Tip:
Stacking two identical antennas doubles the signal power,
providing an extra 3dB. Four antennas, an extra 6dB. Fracarro
stacking couplers can be used to stack many different antennas.
Stacking also halves beamwidth and sidelobes whilst improving
front to back ratio. Space of about 1.5 wavelengths between
each 20 element antenna is required.
20/4753
20 ALFA
14dB gain for UHF CB, nice 50Ω match.
20 DELTA
Au ch. 24–36, 14dB gain, 26dB f/b ratio.
block B
20/4046
Au ch. 34–49, 14dB gain, 26dB f/b ratio.
block C, block D
20/4753
Au ch. 40–57, 14dB gain, 26dB f/b ratio.
20/5461
Au ch. 45–67, 14dB gain, 26dB f/b ratio.
20/6269
Au ch. 55–69, 14dB gain, 26dB f/b ratio.
20 ALFA through to 20/6269 are 20 element narrow
bandwidth antennas, with a genuine ±12° horizontal
and ±23° vertical half power angles.
They drag in signal from afar like nothing else!
20 ALFA
20 DELTA
20/4046
20/4753
20/5461
20/6269
CA1 boom support, recommended for
20 element BL series and narrow band
Yagi antennas.
Included in all 20RD models at no extra cost.
CA1 Boom support
close up.
Tech Tip:
CA1 boom support, improves physical
strength of FR 20 element antennas.
Catalogue 106
17
Antennas & Mounting Hardware
FULL BAND UHF YAGIS
10BL45
Image: 20BL5.
10BL4F
10 el. b4 Au ch. 28–40, 14dB gain, 27dB f/b ratio.
20BL4F
20 el. b4 Au ch. 28–40, 16dB gain, 21dB f/b ratio.
10BL45F
10 el. b45 Au ch. 28–69, 12.5dB gain, 24dB f/b ratio.
20BL45F
20 el. b45 Au ch. 28–69, 14.5dB gain, 24dB f/b ratio.
10BL5F
10 el. b5 Au ch. 39–69, 13.5dB gain, 22dB f/b ratio.
20BL5F
20 el. b5 Au ch. 39–69, 15dB gain, 24dB f/b ratio.
CA1 Boom support recommended for 20BL4.
CORNER REFLECTOR UHF YAGIS
Corner reflectors improve anti-ghost performance & appearance of RD model antennas. F models include F type connector.
10RD5
20RD5F
10RD4
10 el. ch.28–40 band 4, 14dB gain. 26dB f/b ratio.
20RD4
20 el. ch.28–40 band 4, 15.5dB gain. 28dB f/b ratio.
10RD4F
10 el. ch.28–40 band 4, 14dB gain. 26dB f/b ratio.
20RD4F
20 el. ch.28–40 band 4, 15.5dB gain. 28dB f/b ratio.
10RD5F
10 el. ch.39–69 band 5, 13dB gain. 24dB f/b ratio.
20RD5
20 el. ch.39–69 band 5, 16dB gain, 25db f/b ratio.
20RD5F
20 el. ch.39–69 band 5, 16dB gain, 25dB f/b ratio.
RD models incorporate corner reflectors that improve
anti-ghost performance and appearance. 20RD antennas
include a CA1 boom support. F models feature F type
connector termination.
ANT5143802
CAI AERIAL BENCHMARKS
Channels:
28–40 band 4, Philips Portenseigne Lambda
Gain:
16.5dB
F/B Ratio:
30dB
Boom length: 238cm
Aerial Benchmarking is a British program that specifies minimum
performance standards for UHF Digital TV.
Conformance is determined by independent Test Houses and
covers specifications like Gain, Impedance Match, Directivity
and rejection of Feeder Pick-Up. The implications are particularly
interesting for areas of Australia where UHF is intended for use for
Digital TV.
Antennas that have been approved will display a “mark”,
confirming that the required standard has been reached.
Although this benchmark is not a legal requirement, experience
in the industry has indicated that it will be to the industry’s
advantage to supply equipment to this recommendation.
http://www.cai.org.uk/asp/bmaerials.asp
18
Catalogue 106
Antennas & Mounting Hardware
BLU SERIES PRE-ASSEMBLED UHF YAGIS
BLU220F PLUS
BLU420F
Channels:
28–69, b 4&5
Channels:
28–69, b 4 & 5
Gain:
15dB
Gain:
13dB
F/B Ratio:
30dB
F/B Ratio:
30dB
Boom length:
119cm
Boom length: 84cm
BLU425F
BLU424F
Channels:
40–69, b 5
Channels:
28–40, b 4
Gain:
15dB
Gain:
13dB
F/B Ratio:
26dB
F/B Ratio:
27dB
Boom length:
119cm
Boom length:
122cm
BLU920F
Channels:
28-69, b4&5
90 element UHF antenna.
Gain:
18dB
F/B Ratio:
30dB
Easy to install, large corner reflectors improve ghost rejection.
Extra physical strength withstands high wind load.
Boom length:
242cm
Catalogue 106
19
Antennas & Mounting Hardware
OMEGA PRE-ASSEMBLED UHF YAGIS
18
16
17
15
16
14
15
13
14
12
13
11
12
11
10
10
9
9
8
450 480 510 540 570 600 630 660 690 720 750 780 810 840 870 900
OMEGA5
OMEGA5
5 directors. Au ch. 28–69, bands 4 & 5, 14dB gain,
32dB front to back ratio.
OMEGA8
8 directors. Au ch. 28–69, bands 4 & 5, 16dB gain,
32dB front to back ratio.
OMEGA8
8
450 480 510 540 570 600 630 660 690 720 750 780 810 840 870 900
OMEGA are a series of high performance TV antennas. Full
wavelength elements soften the focus. Includes optimal
F connector dipoles. Easy to install for either Horizontal or
Vertical polarities, fits masting to 60mm, up to 30° tilt.
UHF PHASED ARRAY
Petite Performers
PU4F
Channels:
28–69, b4&5
Gain:
12dB
F/B Ratio:
21dB
Dimensions:
71x38.5cm
PU4F
P54F
Channels:
39–69, b5
Gain:
12dB
F/B Ratio:
24dB
Dimensions:
62x32cm
Increased
Capture Area
P54F
PU4AF
Channels:
28–69, b4&5
Gain:
14dB
F/B Ratio:
20dB
Dimensions:
50x76.5cm
PU4AF
P54AF
Channels:
39–69, b5
Gain:
14dB
F/B Ratio:
22dB
Dimensions:
71x38.5cm
P54AF
PVP
Vertical polarisation bracket,
permits vertical installation of
PU4F, P54F, PU4AF & P54AF.
20
Catalogue 106
Tech Tip:
Phased Array antennas provide outstanding rejection of multipath
reflected signal when receiving vertically polarised signals.
Antennas & Mounting Hardware
Horizontal pre stack
Vertical pre stack
PU8F
PU8VF
Now shipping
with F Connector!
Channels:
28–69, bands 4 & 5
Gain:
16dB
F/B Ratio:
26dB
Dimensions:
156x40cm
Channels:
28–69, b4&5
Gain:
16dB
F/B Ratio:
26dB
Dimensions:
88.5x72cm
Now shipping
with F Connector!
The weak TV signal team
Deep DEEP Fringe
PU16F
AP369F
Channels:
28–69, bands 4&5
Gain:
13.5dB
F/B Ratio:
20dB
Dimensions:
83.5x68cm
Mounting
Bracket:
New easy to assemble construction and tool
less install, mounting bracket suits masting
from 20 to 60mmØ with vertical polarity.
Now shipping
with F Connector!
Channels:
28–69
Gain:
18.5dB
F/B Ratio:
28dB
Dimensions:
167x72cm
Now shipping
with F Connector!
Tech Tip:
PU16 and PU8 can lift terminally weak or diffused signal. As well as a larger
capture area, they give extra gain, narrower beamwidth and higher front
to back ratio than a single phased array antenna. Mount PU16 securely as
movement of narrow beamwidth antennas can cause signal fade.
BR411
12V DC, +14dB gain, noise figure 1.4dB.
BR441
5V DC, +14dB gain, noise figure 1.4dB.
Pre-amplifier — fits the AP369F antenna, inside the balun
casing to amplify every microvolt the antenna develops. As
the magic is done between the antenna and the first chip, the
output can then be further amplified with less noticeable loss
of quality.
Catalogue 106
21
Antennas & Mounting Hardware
RADIO SERVICES
FM BAND2 88-108MHz
DAB+ HALF BAND 3
ANT3030810
ANT1200A
Gain:
2.1dB
Gain:
6dB
Boom length:
96cm
Boom length:
176cm
Element count:
1
Element count:
4
Dimensions:
96x77cm
Carton Quantity:
15
Carton Quantity:
10
Vertical, Horizontal or Circular polarity FM Radio dipole.
F connector.
A half band 3 antenna perfect for Australian DAB+
frequencies. Quick assembly and easy vertical mounting
ensures fast installation. DAB+ beyond the city? Yes.
SET TOP ANTENNAS
5FM
DIPUHF
Gain:
8dB
Boom length:
262cm
Element count:
5
Carton Quantity:
15
Catalogue 106
SBSA
DIPUHF
Dipole antenna 190mmØ with TV mount. Includes
750mm of 300Ω ribbon. Surprising performance
on UHF and band 3. BT1 balun required for 75Ω.
SBSA
Set Top telescopic antenna. Clips into TV
back bracket. 980mm maximum element length.
Complete with 750mm ribbon. Requires BT1 balun
for 75Ω connection.
TVTA
Indoor telescopic antenna. Retail ready blister
pack with colour card, dummy-proof instructions
and Bar Code. Each element extends to 750mm.
900mm of 75Ω coax and PAL plug.
Stable weighted base! Black or White.
High gain 88-108MHz band 2 FM antenna, outstanding results
over longer distances. Requires PV2 for vertical mounting.
22
TVTA
Antennas & Mounting Hardware
ANTENNA MOUNTING HARDWARE & ACCESSORIES
Rafter Mounts
Fascia & Pole Mounts
CFB1512
CFB1212
CFB1512
CFB1812
CFB1816
CFB2716
PM1816
MFS
MFS
PM1816
Fascia mount 1.2m x 25mmØ mast x 1.2mm wall
and 5mm plate. Galvanised.
Fascia mount 1.5m x 25mmØ mast x 1.2mm wall
and 5mm plate. Galvanised.
Fascia mount 1.8m x 25mmØ mast x 1.2mm wall
and 5mm plate. Galvanised.
Fascia mount 1.8m x 25mmØ mast x 1.6mm wall
and 5mm plate. Galvanised.
Fascia mount 2.7m x 25mmØ mast x 1.6mm wall
and 5mm plate. Galvanised.
Pole Mount 1.8m x 25mmØ mast x 1.6mm wall as
CFB with mounting plate at 90° to CFB. Galvanised.
Metal Fascia Support, Hot Dip galvanised. Secures
fascia mount to metal fascia. Galvanised.
RM1816
Rafter Mount 1.8m x 25mmØ mast x 1.6mm wall.
Bolts to rafter.
RM2716
Rafter Mount 2.7m x 25mmØ x 1.6mm wall. Bolts
to rafter. Stay bar or guy wire support required.
Use FKLA, Aquaseal or Fleximount tile to weatherproof roof.
All rafter mounts are galvanised.
Antenna Gutter Mount
Mast Extensions
ANTGM
MEKIT
ME900
M
ME900
.9m mast extension, galvanised.
ME1200
1.2m mast extension, galvanised.
ME1500
1.5m mast extension, galvanised.
ME1800
1.8m mast extension, galvanised.
MEKIT
Mast Extension Kit. 2 x long 140mm U bolts with 6
vee blocks, nuts and washers. Allows masting to
be fitted side by side for extra height.
ANTGM
Gutter mount 1.8m x 25mmØ mast x 1.6mm wall
and 5mm plate. Multiple coach screw holes in
mounting plate provides many fitting options.
Galvanised.
ANTGM2
Gutter mount 1.8m x 25mmØ mast x 1.6mm wall
and 5mm plate. Two Piece. Galvanised.
Easy mounting solution for metal fascia homes.
Catalogue 106
23
Antennas & Mounting Hardware
Eave Mounts
Masting
M1825
1.8m x 25mmØ (6’x1”).
M1832
1.8m x 32mmØ (6’x1&1/4”).
Eave Mount 230mm x 25mmØ. Fitted with offset V
block and U Bolts. Galvanised.
M2425
2.4m x 25mmØ (8’x1”).
M2432
2.4m x 32mmØ (8’x1&1/4”).
EM280
Eave Mount 280mm x 25mmØ. Fitted with offset V
block and U Bolts. Galvanised.
M3032
3.0m x 32mmØ (10’x1&1/4”).
M3632
3.6m x 32mmØ (12’x1&1/4”).
EM460
Eave Mount 460mm x 25mmØ. Galvanised.
M4532
4.5m x 32mmØ (15’x1&1/4”).
EM690
Eave Mount 690mm x 25mmØ. Galvanised.
M4538
4.5m x 38mmØ (15’x1&1/2”).
EM1020
Eave Mount 1.02m x 25mmØ. Galvanised.
M61476
6.1m x 47.6mmØ (20’).
EM1500
Eave Mount 1.5m x 25mmØ. Galvanised.
EM230
Eave Mount Kit
Masting Caps
CAPM25
EMK
Eave Mount Kit. 1 x 230mm x 25mmØ eave
mount, 1 x 690mm x 25mmØ eave mount, 2 x
5/16” U bolts, nuts, washers & 1 x offset vee block.
CAPM25
Cap suits any 25mmØ tube.
CAPM32
Cap suits any 32mmØ tube.
CAPM38
Cap suits any 38mmØ tube.
Short mount fixes to fascia board, longer to
brickwork below, to support up to 4.5m of
masting. Offset vee block allows use with almost
any dimension between fascia board and wall.
Standoff Mounts
DVM1
HSB45
BH900
DVM1
HSB45
HSB90
HVSB90
24
HSVB90
BH900
HSB90
Bullhorn 900mm x 25mmØ. With U Bolt and V Block in centre of masting. Fits
masting up to 56mmØ.
Double Vertical Mount, 1.0m x 25mmØ.
Use for any two vertically polarised antennas.
Horizontal Stand-off, 450mm x 25mmØ. Fits masting up to 56mmØ.
Horizontal Stand-off, 1.0m x 25mmØ. Fits masting up to 56mmØ.
Horizontal and Vertical Stand-off, 900mm x 25mmØ.
Fits masting up to 56mmØ.
Catalogue 106
CAPM32
CAPM38
Antennas & Mounting Hardware
Vertical Polarisation Bracket for
Fracarro Phased Array
Staybars & Staybar Collars
SBF700
SBC25
SB1216
SB1816
SB2416
SBC25
SBC32
SBC38
SBF700
Stay Bar 1.2m (4’) x 16mmØ.
Stay Bar 1.8m (6’) x 16mmØ.
Stay Bar 2.4m (8’) x 16mmØ.
Stay Bar Collar for 25mmØ mast.
Stay Bar Collar for 32mmØ mast.
Stay Bar Collar for 38mmØ mast.
Flexible extendable Stay Bar, extends from
700mm x 1400mm.
SBF900
Flexible extendable Stay Bar, extends from
900mm x 1800mm.
PVP
Vertical polarisation bracket, required for vertical
installation of PU4F, P54F, PU4AF & P54AF.
Vertical Polarisation And Tilt Brackets
Stay bars are sold individually.
PV10
Flashing Kits
PVZ60
PV10
Vertical Polarisation Bracket 270mm x 25mmØ,
gives 200mm stand off. Fits masting up to 60mmØ.
PV2
Vertical Polarisation Bracket 500mm x 25mmØ,
gives 460mm stand off. Fits masting up to 56mmØ.
PV8
Tilt bracket for Fracarro Yagi antennas.
PVZ60
Enables use of masting up to 60mmØ and the
ability to tilt any FR 10 element UHF yagi antenna.
Chimney Kits
AQUASEAL1
FLEXITILE LARGE
FKLA
CBK6
FLEXITILE
AQUASEAL1
EPDM flash for up to 63mmØ masting on a
steel or tile roof. Shapes easily to roof profile for
good weather seal with silicone.
FLEXITILE
LARGE
Large rubber flashing kit covers more than 1
tile, better for larger masting! Non-toxic, non
corrosive and light weight.
FLEXITILE
New rubber/aluminium flashing. Non-toxic, non
corrosive and light weight. 450mm x 280mm.
Includes cable entry/exit point.
FKLA
Lead flashing designed for antenna mounts.
Now with new acrylic coating to help prevent
leaching of lead into water storages.
CBK6
CBK12
CCBKT
CBK12
CCBKT
Two individual brackets, each with their own strap,
one end pre-sealed to a 5/16” J bolt. Additional J
bolts, strap seals, 5/16” U bolts, nuts and washers
are provided. Allows brackets to be fitted as far
apart as practical to better spread the load. Hot
Dip Galvanized.
320mm between U bolts. Complete with strap,
one end pre-sealed to a 5/16” J bolt. Another J
bolt, strap seal, 5/16” U bolts, nuts and washers
included. Supports 2 big antennas on mast up to
2.4m. Hot Dip Galvanized.
Curved Chimney Bracket Kit, 1.8m. Low cost
complete chimney mount, with strap presealed to
5/16” J bolt, separate J bolt, strap seal, nuts and
washers are included.
Catalogue 106
25
Antennas & Mounting Hardware
Light Angle Roof Mount
Chimney Kit Accessories
STRAP-SEAL
LARM
JBSS
Light Angle Roof Mount( Hot Dip Galvanised)
27 x 9cm. 12mm fixing holes 200 and 240mm apart.
JBS516
JBS516
J Bolt Square 100 x 25mm x 5/16”.
JBSS
J Bolt, Strap and Seal assembly.
Easily mount your pole anywhere on the roof with this easy to
use mount. Staybars or guywire required to secure pole.
STRAP-SEAL Locks to chimney strap.
U-Bolts & V Blocks
Decking Kits
UB1450
DKG-KIT-B
UB51685
UB1450
1/4” x 90mm x 50mm.
UB51685
5/16” x 85mm x 65mm.
UB516140
5/16” x 140mm x 65mm.
UB516140
DKGGFS
VBP
VBNEST
DKG-KIT-S
DKGMFS
DKGGFB
Decking Kit Brownbuilt. Fits steel deck roofing
with Narrow Ribs.
DKG-KIT-S
Decking Kit Stramit. Fits steel deck roofing with
Wide Ribs.
DKG-MF-B
Decking Mast Foot Brownbuilt.
DKG-MF-S
Decking Mast Foot Stramit.
DKG-GF-B
Decking Guy Foot Brownbuilt.
DKG-GF-S
Decking Guy Foot Stramit.
All decking kits products are hot dip galvanised.
Catalogue 106
VBP
Vee Block Plated.
VBNEST
Vee Block U-bolt Nuts and Washers.
VBOFFSET
Vee Block Offset Plated.
DKGMFB
DKG-KIT-B
26
VBOFFSET
D Clamp
DCB
D Clamp Bracket. 185mm stand off from wall,
393mm between 10mmØ mounting positions with
options 30mm either side. H.D. Galvanised, U bolt
and nuts included.
Antennas & Mounting Hardware
Flat Wall Mount
Vertical Cross Bar Mounts
VPB2
VPB1
VPB1
Support for up to 32mmØ crossbar.
The strongest crossbar support of it’s kind.
VPB2
Vertical Mount Assembly, crossbar support.
FWM
Flat Wall Mount. Two will fix masting to wall with
less than 5mm over hang from flashing etc.
Complete with 2 x vee blocks.
Right Angle Wall Mount
Tripod Mounts
TRI KIT
TRI STRAMIT
RAWM
Simple wall mount complete with U bolt and nuts
for up to 47mm (2&1/4”)Ø masting. Size is only
150mm x 95mm (25 x 5mm bar), with 3 x ≤9mmØ
mounting holes 55mm centre to centre, and 3
x masonry fixings for 8mm drill and 40mm long
screws. Passivated zinc finish.
2 required for most applications.
Ridge Mounts
TRM IRON
TRM TILE
TRM IRON
Iron Roof Tripod Mount for freestanding fitting of
light weight antennas in ‘sweet spots’. Includes
1.2m mast.
TRM TILE
Tile Roof Tripod Mount for freestanding fitting of
light weight antennas in ‘sweet spots’. Includes
1.2m mast. Holes allow for fixing to batten with
roofing screws etc.
TRIKIT
New tile roof mount. Special Z brackets allow
no penetration of the tiles. Quick, Water proof
mount mast not included.
TRIP1.8
Tripod Mast 1.8m. To suit TRIKIT.
TRI STRAMIT
TRI KIT option. Mounting foot with bolt.
RMI
RMT120
RMI
Ridge Mount Iron. Iron roof ridge cap mast foot.
RMT120
Ridge Mount Tile. Tile roof 120° ridge cap mast foot.
All Ridge Mounts are galvanised.
Tech Tip:
SILPRG along tops of corrogated iron should be used when fitting TRM IRON
to reduce corrosion.
Catalogue 106
27
Antennas & Mounting Hardware
NUTS, BOLTS & WASHERS
WN316
HN14P
CS3815
WS316ZP
SAM840
SS3825P
CB3825P
DNP10
CB3825P
RS1265
HW13M4
SC3162
Cup Square Bolt 3/8” x 2 & 1/2” plated.
Square shoulder, round head, for timber or steel.
SAM840
8 x 40mm Sleeve Anchor, plated.
SAM890
8 x 90mm Sleeve Anchor, plated.
SAM1050
10 x 50mm Sleeve Anchor, plated.
SAM1075
10 x 75mm Sleeve Anchor, plated.
SB1060
Screwbolt. Screws directly into concrete, 10mmØ
hole 60mm+ deep.
SC3162
Screw 3/16” x 2” zinc plated, pan head
replacement antenna screw.
CB382P
Cup Square Bolt 3/8” x 2” plated.
CS3815
Coach Screw 3/8” x 1 & 1/2”.
CS382
Coach Screw 3/8” x 2”.
CS3825
Coach Screw 3/8” x 2 & 1/2”.
CS51615
Coach Screw 5/16” x 1 & 1/2”.
CS51625
Coach Screw 5/16” x 2 & 1/2”.
DNP10
Wall Plug. Use CS51615 in mortar or brick etc.
10mmØ hole 60mm+ deep.
SC316175
Screw 3/16” x 1.75” zinc plated, pan head
replacement antenna screw.
DNP12
Wall Plug. Use CS3825 in mortar or brick etc.
12mmØ hole 75mm+ deep.
SS3825P
Set Screw 3/8” x 2 & 1/2”, plated thread up the
shank to a hexagon head.
HN14P
1/4” Hexagon Nut, plated.
WN316
Wing Nut 6”, plated.
HN38P
3/8” Hexagon Nut, plated.
WS316ZP
3/16” Washer, plated.
WS14ZP
1/4” Washer, plated.
WS516ZP
5/16” Washer, plated.
WS38ZP
3/8” Washer, plated.
WSC516
Cyclone washer.
HN316P
3/16” Hexagon Nut, plated.
HN516P
5/16” Hexagon Nut, plated.
HW13M4
Hollow wall anchor, 4mm threads.
RS1265
Roofers Screw galvanised, with neoprene washer.
12 gauge 65mm long. For corrugated iron roof.
GUYING HARDWARE
Guy Wire
GW180/7.90
Screw Eyes
Guy Wire 180m 7 strands each .9mm.
GW30/6X1.12 Guy Wire 30m 6 strands each 1.12mm.
28
Catalogue 106
SE3
Screw Eye 3” Zinc Plated.
SE4
Screw Eye 4” Zinc Plated.
SE5
Screw Eye 5” Zinc Plated.
SE7
Screw Eye 7” Zinc Plated.
Antennas & Mounting Hardware
Guy Anchor Plate
Guy Fascia Bracket
Galvanized guy wire anchor plate. Provides
multiple guy wire anchor points. 270mm long,
80mm between mounting holes.
GAP
GBF
Galvanised Guy Cleat
Secures guy wires beyond roof edge. Screws to
either timber or metal fascia.
Hot Dip Galvanised.
Clamps
GCG25
Galvanised Guy Cleat. 120mm long, 25mm
between each 10mm mounting hole.
GWC5
Telescopic Masts
GWC3
GWC3
Guy Wire Clamp 3mm zinc plated.
GWC5
Guy Wire Clamp 5mm zinc plated.
Guy Plates, Lock Rings & Thimbles
LRA32
TM20
6m (20’) 2 piece telescopic mast.
Accessory pack (TMA20) required.
TM30
9m (30’) 3 piece telescopic mast.
Accessory pack (TMA30) required.
GPA32
Guy Plate A for 32mm or 1.25” OD tube.
12m (40’) 4 piece telescopic mast.
Accessory pack (TMA40) required.
GPB39
Guy Plate B for 39mm or 1.5”OD tube.
GPC43
Guy Plate C for 43mm or 1.75”OD tube.
GPD50
Guy Plate D for 50mm or 2”OD tube.
LRA32
Lock Ring A for 32mm or 1.25”OD tube.
LRB39
Lock Ring B for 39mm or 1.5”OD tube.
LRC47
Lock Ring C for 47mm or 1.75”OD tube.
LRD50
Lock Ring D for 50mm or 2” OD tube .
TBS
Thimbles Heavy Duty.
TM40
TM50
15m (50’) 5 piece telescopic mast.
Accessory pack (TMA50) required.
TMA20
Accessory kit for TM20.
TMA30
Accessory kit for TM30.
TMA40
Accessory kit for TM40.
TMA50
Accessory kit for TM50.
Turnbuckles
TBS
GPA32
Telo Foot Mount
TB516
TB14
TB14
Turnbuckle Hook and Eye 1/4” ZP.
TB516
Turnbuckle Hook and Eye 5/16” ZP.
TFM
Telo Foot Mount. Swivels for installation to almost
any flat surface regardless of angle. 12mm fixing
holes 100mm apart.
Catalogue 106
29
Antennas & Mounting Hardware
CARAVAN KITS & ACCESSORIES
Caravan Antenna Kit
Caravan Mast Wall Clamp
CVNWM
KITLPV345HVRP Caravan Antenna Kit
- 10 metre connection lead
- Specially designed retail box for safe storage
Channels:
VHF: 6–12, UHF: 28–69
Gain:
9.5dB
Boom length:
71cm
Satellite TV Dish Kit
Receive clear pictures anywhere in
Australia. Heavy duty dish, LNB, folding
tripod mount and cabling - with SQ701
KITVASTCARAVAN
signal quality meter, for fast satellite
alignment. Suitable for VAST, Aurora, or
FTA. Receiver supplied separately.
CVNWM
Set of 3 wall clamps for 25mmØ masting. Suits
M2425 etc. Includes 8G 20mm self tapping
screws. Secure soft wall antenna mount,
spreads load over a wider area.
CVNWM2
Caravan wall clamp for 32mmØ masting. Also
suits 25mmØ masting if used with supplied
inserts. Secure soft wall antenna mount installed
via screws and supplied double-sided tape.
Caravan Extension Masts
CEM3-6
32mmØ mast with 28mmØ twist lock telescoping
section, 1.8m extends to 3.6m, Aluminium.
CEM4-8
32mmØ mast with 28mmØ twist lock telescoping
section, 2.4m extends to 4.8m, Aluminium.
Draw Bar Clamp
CDBC
30
Catalogue 106
CVNWM2
Permits fixing of mast to drawbar as per
picture, the strongest structure in a caravan.
2
Contents
Amplifiers &
Modulators
Amplifiers
Splitter Amplifiers
Balun Pre-amplifiers
32
Kingray Distribution Amplifiers
Single Channel Mast Amplifiers
32
Alcad Distribution Amplifiers
In Line Amplifiers
32
Satellite Distribution Amplifiers
41
Kingray Satellite Distribution Amplifiers
41
Power Injectors
42
43
Masthead Amplifiers
Fracarro Map Series, JS2/RT
33
38
39–40
Alcad Mast Amplifiers
34–35
Power Supplies for Mast Amplifiers
Kingray Mast Amplifiers
35–36
Modulators, Mono Audio
Distribution Amplifiers
Multiband
36
Fracarro AMP Series, Fracarro MBX Series
37
AV To Digital Cofdm Modulator
44
Stereo Audio
44
Catalogue 106
31
Amplifiers & Modulators
AMPLIFERS
IN LINE AMPLIFERS
SINGLE CHANNEL MAST AMPLIFIER
Mast amplifiers that amplify one TV channel only. Eliminates
interfering signals, enables better MATV results from weak
signals. Specify channel with your order.
LA1-18F
+18dB VHF/UHF 40–900MHz fixed gain low cost
TV line amplifier.
103dBμV max. out, nf <5dB type. F connectors.
12V DC @<50mA. Use with PS12DCP supply or
CA215 amplifier etc.
Handy for beating the loss of long cable runs. Out to In Power
pass! FBLKDC may be required to stop antenna shorting supply.
Band:
Noise:
Gain:
Power Supply:
ATB/..
UHF
4dB
+30dB
12V DC @7mA
AT2/..
VHF
4dB
+30dB
12V DC @7mA
Brown terminal: Output and Power supply. Limited
channels available.
AP369 BALUN PRE-AMPLIFERS
Fits inside ALCAD AP369 antennas right on the dipole,
amplifying every microvolt the antenna develops. As the
magic is done between the antenna and the first chip, the
output can then be further amplified with less noticeable
loss of quality.
LA2-20
32
+18dB Satellite I.F. 950-2150MHz Line amplifier.
110dBμV max. out, nf <7dB. 14/18V DC @40mA.
Passes up to 500mA.
Catalogue 106
BR411
12V DC, 14dB gain, noise figure <1.4dB.
BR441
5V DC, 14dB gain, noise figure <1.4dB.
Power from a compatible Set Top Box!
Amplifiers & Modulators
MASTHEAD AMPLIFIERS
FRACARRO MAST AMPLIFIERS
MAP SERIES
MAP206
Input:
Input Band:
(MHz)
Gain:
(dB)
Output Level:
(dBμV)
Gain Adjust:
(dB)
Power
Consumption:
(mA @ 12V DC)
MAP105
1
UHF
33
108
15
85
MAP106
1
VHF & UHF
34
108
15
75
MAP109
1
VHF & UHF
17
92
15
65
MAP206
2
VHF & UHF
35, 36
108
15, 15
75
MAP315
3
VHF, UHF & UHF
34, 40, 40
105
15, 15, 15
95
MAP105–109
MAP402
MAP300–315
Input:
Input Band:
(MHz)
Gain:
(dB)
Output
Level:
(dBμV)
Gain Adjust:
(dB)
Power
Consumption:
(mA @ 24V DC)
MAP300
3
VHF, UHF & UHF
34, 40, 40
108
15, 15, 15
80
MAP402
4
VHF, B4, B5 & UHF
34, 41,41, 42
108
15, 15, 15, 15
90
• The innovative plastic housing system locks the cover in place and allows the
amplifier to be tilted inside for quick and easy installation.
• Operating temperature: -10 to 55°C.
• Totally shielded metal housing with F connectors.
• Adjustable plastic strap for mast mounting Ø 60mm max.
JS2/RT
JS
JS2/RT
•
•
•
•
•
Input:
Input Band:
(MHz)
Gain:
(dB)
Output
Level:
(dBμV)
Gain
Adjust:
(dB)
Power
Consumption:
(mA @ 12V DC)
1
47–862
7–22
108
15
60
Excellent low noise amplifier for digital.
Totally shielded metal housing with F connectors.
Power requirement 12V DC, on a single output.
Operating temperature: -10 to 55°C.
Adjustable plastic strap for mast mounting Ø 60mm max.
EM2/L3U
ES1/5MZS
JK6RP45
JK6RP45
3 inputs: B1 +21dB and B3 +19dB; B4 Au Ch 20
to 35 +29dB; B5 Au Ch 39 to 75 +31dB. 3 x -20dB
constant 75Ω gain controls, F connection,
Requires 12V DC@75mA power supply.
JK6RP45S
3 inputs: B1 +21dB and B3 +19dB; B4 Au Ch 20
to 33 +29dB; B5 Au Ch 37 to 75 +31dB. 3 x -20dB
constant 75Ω gain controls, F connection,
Requires 12V DC@75mA power supply.
EM2/L3U
3 inputs: B1&2 +27dB, B3 +28dB, UHF +22dB,
12V DC@55mA.
12V DC output! Max 108dBμV.
ES1/5MZS
2 inputs: B5 (AuCh.38-75) +11dB, B1, 2 , 3 & 4
(Ch.0-32 ) coupled @ -.5dB. 12V DC@25mA.
Catalogue 106
33
Amplifiers & Modulators
ALCAD MAST AMPLIFIERS
Alcad masthead amplifiers are 100% shielded with easy control access and F type inputs/outputs. The weatherproof ABS
housing has an improved lock mechanism which keeps the weather out. Test points permit in circuit testing and can double
as additional reduced level outputs. Choose Alcad for performance, flexibility and accessibility. Maximum output is a healthy
108dBμV on 2 equal channels.
AM112–AM115
AM315–AM316
AM126
AM206–AM217
AM318–AM319
AM416
Gain:
Inputs:
AM112
UHF +24dB fixed
1x UHF
AM115
B1 & B3 +30dB (adj -22dB midstage)
FM Rejected
UHF +36dB (adj -16dB midstage)
1x Combined VHF/UHF
AM126
B1 & B3 +24dB (adj -24dB midstage)
FM +14dB
UHF +36dB (adj -16dB midstage)
1 x Combined VHF/UHF
1 x 108dBμV
1 x UHF (cut link for
Test point -15dB
separate inputs)
AM206
B1 & B3 +24dB (adj -24dB midstage)
FM +14dB
UHF +36dB (adj -16dB midstage)
1 x VHF
1x UHF
1 x 108dBμV
VHF 4.5dB
Test point -15dB
UHF 2.5dB
AM210
B3 +16dB (adj–18dB)
UHF +24dB (adj -16dB)
1 x VHF (B3)
1 x UHF
1 x 108dBμV
VHF <4.5dB
Test point -15dB
UHF <2.5dB
AM215
B1 & B3 +24dB (adj -24dB midstage)
FM Rejected
UHF +36dB (adj -16dB midstage)
1 x VHF (B1 & B3)
UHF
1 x 108dBμV
VHF 4.5dB
Test point -15dB
UHF 2.5dB
AM216
B1 & B3 +24dB (adj -24dB midstage)
FM +14dB
UHF +36dB (adj -16dB midstage)
1 x VHF
1 x UHF
1 x 108dBμV
VHF 4.5dB
Test point -15dB
UHF 2.5dB
AM217
B1, FM & B3 +18dB (adj -24dB midstage)
UHF +36dB (adj -16dB midstage)
1 x VHF
1 x UHF
1 x 108dBμV
VHF 4.5dB
Test point -15dB
UHF 2.5dB
AM315
B1 & B3 +30dB (adj -22dB midstage)
FM Rejected
UHF 1 +40dB (adj -16dB midstage)
UHF 2 +40dB (adj -16dB midstage)
1 x VHF (B1 & B3)
2 x UHF
1 x 108dBμV
VHF 4dB
Test point -15dB
UHF 5dB
AM316
B1 & B3 +30dB (adj -22dB midstage)
FM +20dB
UHF 1 +40dB (adj -16dB midstage)
UHF 2 +40dB (adj -16dB midstage)
1 x VHF
2 x UHF
1 x 108dBμV
VHF 4dB
Test point -15dB
UHF 5dB
1 x 108dBμV
VHF <4dB
Test point -15dB
UHF <3dB
1 x 108dBμV
VHF <4dB
Test point -15dB
UHF <3dB
B1 & B3 +30dB (adj -20dB midstage)
FM Rejected
UHF 1 Ch 20-31 +38dB (adj -16dB
AM318/31-34
midstage)
UHF 2 Ch 34-69 +38dB (adj -16dB
midstage)
1 x VHF (B1 & B3)
1 x UHF (ch 20-31)
1 x UHF (ch 34-69)
B1 & B3 +30dB (adj -20dB midstage)
FM Rejected
UHF 1 Ch 20-37 +38dB (adj -16dB
AM318/37-40
midstage)
UHF 2 Ch 40-69 +38dB (adj -16dB
midstage)
1 x VHF (B1 & B3)
1 x UHF (ch 20-37)
1 x UHF (ch 40-69)
34
Catalogue 106
Outputs:
1 X 108dBμV
Test point -10dB
Noise:
Power:
2.5dB
12V DC
12V DC @ 45mA
1 x 108dBμV
VHF 5dB
Test point -15dB
UHF 2.5dB
Switchable 12V DC 50mA
power to input
<3dB
22V AC or 24V DC
24V DC @ 45mA
Switchable 24V DC 50mA
power to input
12V DC @ 45mA
Switchable 12V DC 50mA
power to UHF input
12V DC @ 45mA
Switchable 12V DC 50mA
power to UHF input
12V DC @ 45mA
Switchable 12V DC 50mA
power to UHF input
12V DC @ 45mA
Switchable 12V DC 50mA
power to UHF input
12V DC @ 45mA
Switchable 12V DC 50mA
power to both UHF inputs
12V DC @ 45mA
Switchable 12V DC 50mA
power to both UHF inputs
12V DC @ 45mA
Switchable 12V DC 50mA
power to both UHF inputs
12V DC @ 45mA
Switchable 12V DC 50mA
power to both UHF inputs
Amplifiers & Modulators
Gain:
Inputs:
B1 & B3 +30dB (adj -20dB midstage)
FM +20dB
UHF 1 Ch 20-31 +38dB (adj -16dB
AM319/31-34
midstage)
UHF 2 Ch 34-69 +38dB (adj -16dB
midstage)
1 x VHF
1 x UHF (ch 20-31)
1 x UHF (ch 34-69)
AM416
B1, B2 & B3 +26dB (adj–22dB midstage)
UHF +38dB (adj -16dB midstage)
1 x B1
1 x B2
1 x B3
1 x UHF
AM417
B1, B2 & B3 +26dB (adj–22dB midstage)
UHF 1 +38dB (adj -16dB midstage)
UHF 1 +38dB (adj -16dB midstage)
1 x B1 & B2
1 x B3
2 x UHF
Outputs:
Noise:
1 x 108dBμV
VHF <4dB
Test point -15dB
UHF <3dB
1 x 108dBμV
VHF 5.5dB
Test point -15dB
UHF 2.5dB
1 x 108dBμV
VHF 5dB
Test point -15dB
UHF 5.5dB
Power:
12V DC @ 45mA
Switchable 12V DC
50mA power to both
UHF inputs
12V DC @ 45mA
Switchable 12V DC
50mA power UHF input
12V DC @ 45mA
Switchable 12V DC
50mA power to both
UHF inputs
KINGRAY MAST AMPLIFIERS
Noise:
Gain:
Inputs:
Outputs:
Noise:
1, 2 or Combination, 1 x
F connection
108dBμV
<2dB
34dB
1, 2 or Combination, 1 x
F connection
108dBμV
<2.5dB
1, 2 or Combination,
1x
F connection and
108dBμV
shielded case
<2dB
MHU34FS 34dB
1, 2 or Combination,
1x
F connection and
108dBμV
shielded case
<2.5dB
1 or 2, saddle and
screw connection
<2dB
MHU34G
1, 2 or Combination,
1x
saddle and screw
105dBμV
connection
<2.5dB
Gain:
Inputs:
MHU24F
25dB
MHU24FS
25dB
MHU24GE 24dB
Outputs:
1x
105dBμV
34dB
Requires 14VDC or 17VAC power supply.
Requires 14VDC or 17VAC power supply.
Gain:
Inputs:
Gain:
Inputs:
MHV34
VHF: 34dB
1 or 2, saddle
1x
and screw
<2dB
108dBμV
connection
MHV44HLG
1 or 2, saddle
VHF: 44dB,
1x
VHF: <3dB
and screw
UHF: 10dB
108dBμV UHF: N/A
connection
Outputs: Noise:
MHU44G
44dB
1 or 2, saddle and
screw connection
1x
<2.5dB
108dBμV
MHU44B5G
B5: 44dB 1 or 2, saddle and
screw connection
1x
<2.5dB
108dBμV
MHU44B5G, for use with a separate Band 5 only UHF antenna,
and diplex a separate VHF / Band 4 UHF antenna. Requires
14VDC or 17VAC power supply.
Outputs: Noise:
MHV44HLG, Screw and saddle masthead designed to amplify
a separate VHF antenna and diplex a separate UHF antenna
with low gain. Bypass/Diplex Low Band. Requires 14VDC or
17VAC power supply.
Catalogue 106
35
Amplifiers & Modulators
Gain:
Inputs:
Outputs:
Noise:
KMW32FS
VHF: 16–26dB,
UHF: 22–32dB
1, 2 or combination,
VHF: <3.5dB
1 x 108dBμV
F connection, shielded case
UHF: <2.5dB
KMD24FS
VHF: 8–18dB,
UHF: 12–24dB
1, 2 or combination,
VHF: <3.5dB
1 x 108dBμV
F connection, shielded case
UHF: <2.5dB
KMU32FS
VHF: -1dB,
UHF: 22–32dB
1, 2 or combination,
VHF: N/A
1 x 108dBμV
F connection, shielded case
UHF: <2.5dB
Requires 14VDC or 17VAC power supply. Fixed -25dB FM and Pager filters.
Gain:
Inputs:
Outputs:
Noise:
MHW24F
VHF: 12–15dB,
UHF: 24dB
1, 2 or combination,
F connection
1 x 108dBμV
VHF: <3.5dB
UHF: <2.1dB
MHW24FE
VHF: 12–15dB,
UHF: 24dB
1, F connection
1 x 105dBμV
VHF: <2dB
UHF: <2.5dB
MHW24FS
VHF: 12–15dB,
UHF: 24dB
1, 2 or combination,
VHF: <3.5dB
1 x 108dBμV
F connection, shielded case
UHF: <2.1dB
MHW24GE
VHF: 14–20dB,
UHF: 24dB fixed
1, saddle and screw
connection
1x 105dBμV <3dB
Requires 14VDC or 17VAC power supply.
Gain:
Inputs:
Outputs:
Noise:
MHW34F
VHF: 22-26dB,
UHF: 34dB
1, 2 or combination,
F connection
1 x 108dBμV
VHF: <3dB
UHF: <2.5dB
MHW34FS
VHF: 22-26dB,
UHF: 34dB
1, 2 or combination,
F connection, shielded case
1 x 108dBμV
VHF: <3dB
UHF: <2.5dB
MHW34G
VHF: 20-28dB,
UHF: 34dB
1, 2 or combination, saddle
and screw connection
1 x 105dBμV
VHF: <3dB
UHF: <2.5dB
Requires 14VDC or 17VAC power supply.
Bulk packages now available of some Kingray lines.
DISTRIBUTION AMPLIFIERS
MULTIBAND MBJ SERIES AMPLIFIERS
Multiband amplifiers amplify and mix signals from several sources. Two versions, one 112/113dBμV out and the other
117dBμV out, to be used in small and medium networks. Metal housing, totally shielded, with plastic cover and F connectors.
Packaging 1 pc.
•
•
•
•
Separate amplification for VHF and UHF bands,
All the adjustments are located under the cover to prevent unauthorised access,
Switch mode power supply, high efficiency and low consumption,
Remote power supply selectable on each input, 100mA max.
Input:
Input Band:
(MHz)
Gain:
(dB)
Output Level:
(dBμV)
MBJ2320
2
VHF/UHF
+24dB
VHF: 109, UHF: 113
MBJ2332
3
B1, B3, B4 & B5
B1 & B3 +21dB, B4 +26dB, B5 +24dB
VHF: 109, UHF: 112
MBJ2332/32-36
3
B1, B3, B4 & B5
B1 & B3 +21dB, B4 +26dB, B5 +24dB
VHF: 109, UHF: 112
B3, B4, B5 & UHF
B1 & FM: 20dB, B3 +19dB, B4 +22dB, B5
VHF: 109, UHF: 112
+22dB, UHF +22dB
MBJ2356
5
Remote power 12V DC, 100mA total, available on any input. Mains voltage 220–240VAC. Gain
adjustment 0–20dB on every input. F female Connectors
36
Catalogue 106
Amplifiers & Modulators
AMP SERIES AMPLIFIERS
AMP series broadband amplifiers share Fracarro’s award
winning MBX series housing design. Switch mode power
supply reliability with concealed controls to reduce the
likelihood of user interference. High Output Levels and Gain
in fully shielded housings that incorporate F connectors.
Proven performers with return path capabilities.
AMP9762
AMP9764
AMP9763
MBX SERIES AMPLIFIERS
MBX amplifiers feature high gain and output power levels
in an Award winning housing design. Zamac housing
with F connectors, switch mode power supplies and
concealed controls.
MBX5710
1 x input: +43dB UHF. Output level 119dBμV UHF
and 116dBμV VHF. Noise figure: 6dB UHF and
4.5dB VHF.
MBX5750
5 x inputs: UHF +43dB, B5 +43dB, B4 +43dB, B3
+38dB, , (B2 &) B1 +35dB. Mains powered.
5 x Gain controls. Noise figure: UHF 8.5dB, VHF
4.5dB. Separate VHF and UHF band amplification
UHF 119dBμV, VHF 116dBμV output.
MBX7741
4 x inputs: +40dB UHF, +40dB UHF, +40dB FM,
+40dB B3 and B1. 4 x Gain controls. Noise figure
11dB. High 124dBμV output. Mains powered.
MBX7750
5 x inputs: UHF +40dB, B5 +40dB, B4 +40dB, B3
+40dB, (B2 &) B1 +40dB. 5 x 75Ω Gain controls.
Noise figure: 11dB UHF and VHF. High 124dBμV
output. Mains powered.
Terrestrial line amplifier with return path. 1 input:
+42dB over 47–862MHz. Gain and Slope controls
-20dB constant 75. Output 120dBμV. Noise figure
8dB. Linearity ≤4dB. Return Path 5–30MHz passive
or active. Mains powered.
Amplifier for satellite with passive loop-through
for terrestrial. 2 inputs: +40dB over 950–2,150MHz,
-2dB 47–860MHz. Gain and Slope controls -20dB
constant 75Ω. Output 125dBμV, noise figure 10dB.
Mains powered.
Ultra broadband amplifier with return path. 1
input: +40dB over 47–862 and 950–2,400MHz.
Gain and Slope controls for Terrestrial and
Satellite bands. Output 125dBμV Satellite noise
figure 8dB Terrestrial noise figure 10dB Sat. Ret.
Path 5–30MHz passive or active. Mains powered.
Catalogue 106
37
Amplifiers & Modulators
SPLITTER AMPLIFIERS
SA162F
KINGRAY DISTRIBUTION AMPLIFIERS
SA164F
DW42
SA162F
SA164F
Inputs:
1x
1x
Gain:
VHF +14dB, UHF
fixed gain +16dB.
VHF +14dB, UHF fixed
gain +16dB.
Split Loss:
-4dB split loss
-7dB split loss(Slope Eq.)
Outputs:
2 outputs,
100dBμV max
4 outputs,
100dBμV max
Noise Figure:
<3.5dB
<3.5dB
Power Supply:
Integrated mains supply
Connection:
F Type, with adapter to convert to PAL
DW32
2 inputs: VHF +28dB, UHF +32dB. Mixed or
separate U/V inputs. Gain adjust VHF 26–28dB,
UHF 32dB. 1 output, max. 112dBμV, return loss
≥10dB 47–862MHz, ≥14dB @5-30MHz, 1 x test
point -30dB, F female connectors, nf ≤3.5dB
type. PSK12 power supply included.
DW42
2 inputs: VHF +37dB, UHF +40dB. 3 x -20dB
gain adj. B1, B3, UHF. Mixed or separate U/V
inputs, selectable. 1 output, max. 118dBμV,
nf ≤7dB type F female connectors. Shielded
diecast housing. Requires PSK18S power supply
(excluded).
DA43
1 input: 40–860 MHz +43dB amplifier. 1 output
max 118dBμV, -30dB Test Point. -20dB midstage
constant 75Ω gain control; 5, 10 or 15 dB slope
eq. nf<6dB. F female connectors. Shielded
diecast housing. Requires PSK18S power
supply (excluded).
SA164R
Inputs:
1x
Gain Adjust:
VHF 12–14dB, UHF slope adjustable 16dB
Outputs:
4 x Max. 100dBμV
Noise Figure:
>3.5dB
MASTHEAD DISTRIBUTION AMPLIFIERS
Following products with /F come with F connectors (e.g.
MHW34F), /FS come with a fully shielded case as well as
F connectors (e.g. MHW34FS).
SAM224
Inputs:
1x
Gain Adjust:
VHF 12–14dB, UHF 16dB
Outputs:
4 x Max. 100dBμV
Noise Figure:
>3.5dB
Requires 14V DC power supply (PSK06).
Inputs:
Outputs:
MDA20H
1 x VHF: ch. 174–470MHz,
UHF: ch. 470–860MHz.
Max. gain: 19dB
1 x 118dBμV <1.6dB
MDA20L
1 x VHF ch. 44–470MHz,
UHF: ch. 470–860MHz.
Max. gain: 19dB
1 x 118dBμV <1.6dB
MDA20U
1 x UHF: Max. gain: 19dB
1 x 118dBμV <1.6dB
PSK06F power supply included.
38
Catalogue 106
Noise:
Amplifiers & Modulators
ALCAD DISTRIBUTION AMPLIFIERS
CA310
AI100
Gain:
VHF: 35dB, UHF: 42dB, FM: 25dB
VHF: 14dB, UHF: 24dB
Gain Adjust:
VHF: 20dB, UHF: 16dB
Gain Adjust:
VHF: 16dB, UHF: 12dB
Inputs:
3 x VHF incl. FM DAB+, UHF 1, UHF 2.
Inputs:
1 x VHF incl FM & DAB+ & UHF
Outputs:
3 x 2 equal, 1 -30dB
Outputs:
2 x (1x -14dB)
Output Levels:
110dBμV Maximum x 2
Output Level:
104dBμV Maximum
Connection Type:
F
Connection Type:
F
Noise Figure:
5dB
Noise Figure:
<4.5dB VHF, <3.5dB UHF
Return Loss:
≥13dB
Return Loss:
≥10dB
Gain:
Integrated regulated mains power supply.
24V DC @ up to 50mA available from UHF1 input.
Integrated regulated mains supply.
CA311
CA215
Gain:
VHF: 33dB, UHF: 45dB
Gain:
VHF: 24dB, UHF: 25dB
Gain Adjust:
VHF: 20dB, UHF: 16dB
Gain Adjust:
VHF: 16dB, UHF: 12dB
Inputs:
2 x VHF incl. FM DAB+, UHF
Inputs:
1 x VHF incl FM & DAB+ & UHF
Outputs:
2 x equal
Outputs:
2 x equal
Output Levels:
110dBμV Maximum x 2
Output Level:
102dBμV Maximum x 2
Connection Type:
F
Connection Type:
F
Noise Figure:
VHF: 4dB, UHF: 3dB
Noise Figure:
VHF: <4.5dB, UHF: <3dB
Return Loss:
≥10dB
Return Loss:
≥10dB
Integrated regulated mains supply.
Integrated regulated mains power supply.
24V DC @ up to 50mA available from UHF1 input.
12V DC @ up to 50mA selectable at Input compatible with
many mast amplifiers and preamplifiers.
Catalogue 106
39
Amplifiers & Modulators
CF111
CA313
Gain:
VHF B1, B3: 25dB, B4, B5: 34dB, UHF: 34dB
Gain Adjust:
VHF: 20dB, UHF: 16dB
Inputs:
5 x B1, B3 incl DAB+, B4, B5 & all UHF
Outputs:
1 x 114dBμV Maximum
Connection Type:
F
Gain:
VHF: +38dB
Noise Figure:
VHF <6.5dB, UHF <5.5dB
Gain Adjust:
VHF and UHF -20dB, 18dB slope controls
≥10dB
Inputs:
1 x +38dB
Output:
1 x 113dBμV Maximum
Connection Type:
F
Noise Figure:
<8.5dB
Return Loss:
≥10dB 47–862MHz, ≥14dB 5–30MHz
Return Path:
+10dB 5–30MHz active return path
Return Loss:
Integrated regulated mains supply.
12V DC @ up to 50mA available from all 3 UHF inputs.
In and out test points -30dB.
CF711
CF511
Bands:
B1, FM, B3, UHF1 and UHF2
Bands:
VHF and UHF
Gain:
+40dB B1, FM and B3 +45dB UHF
Gain:
+47dB
Gain Adjust:
-20dB constant 75Ω @ each input
Gain Adjust:
Gain control -20dB and 18dB slope
Inputs:
5 x +40dB B1, FM, B3, +45dB UHF1, UHF2
Inputs:
1 x 47dB
Output:
1 x 115dBμV Maximum
Outputs:
1 x Max. 120dBμV
Connection Type:
F
Connection Type:
F
Noise Figure:
<8dB
Noise Figure:
8.5dB
≥10dB 47–862MHz, ≥14dB 5–30MHz
Return Loss:
≥10dB 47–862MHz, ≥14dB 5–30MHz
Return Loss:
1 x test point -30dB.
24V DC@up to 60mA automatically from each input.
40
Catalogue 106
In and out test points -30dB.
Amplifiers & Modulators
SATELLITE DISTRIBUTION AMPLIFIERS
CA730
DA711
PayTV
Approved
Bands:
VHF/UHF and SAT IF
Gain Adjust:
+42dB SAT IF, -2dB VHF/UHF mix
Inputs:
SAT IF, VHF/UHF mix
Output:
1 x Max. 120dBμV
Connection Type:
F
Noise Figure:
<8dB
Return Loss:
>10dB
Flatness + or –3dB, + or –1.5dB over 36MHz.
13 or 17V 350mA LNB supplied, 22KHz generator.
PayTV
Approved
Bands:
Terrestrial and Satellite
Gain:
+41dB SAT, 31dB terrestrial
Gain Adjust:
-34dB, 47–862MHz, +34dB V&U,
+4dB 5–30 Return Path TV-17 SAT-10dB
Inputs:
1 x , Slope TV-20 SAT-15dB, Fixed slope
Eq. -2.5dB R.P, 7dB SAT. 1x test point -30dB
Output:
1 x Max. 120dBμV, 1 x test point -30dB
Connection Type:
F
Noise Figure:
<8dB
Return Loss:
≥14dB
Return Path:
≥10dB TV, ≥9dB SAT
AMP9603
DA720
Bands:
VHF/UHF
Gain:
+36dB slope
Gain Adjust:
-20dB, 18dB slope controls
Inputs:
1 x +36dB 47–422MHz VHF, 470–862 MHz
UHF. 1x input split band gain and slope
controls
Output:
1 x Max. 120dBμV, ≥14dB 5–30MHz
Connection Type:
F
Noise Figure:
<7dB
Return Loss:
≥10dB 47–862MHz, ≥15dB 5–30MHz
1 input: +40/45dB 950–2150MHz, -18dB Gain
and 10dB Slope controls, 114dBμV output IM3
-35dB; +30dB 86–862MHz, -20dB Gain and 18dB
Slope controls constant 75Ω, -2dB 5–65MHz.
108dBμV output IM3 -60dB.
In and out test points -30dB.
Catalogue 106
41
Amplifiers & Modulators
KINGRAY SATELLITE DISTRIBUTION AMPLIFIERS
SAT29D
SAT42D
Gain:
29dB
Gain:
42dB
Inputs:
2 x 950–2050MHz
Inputs:
2 x 950–2050MHz
Outputs:
2x
Outputs:
2x
Requires 18V DC remote power supply (PSK18S).
Diplexed output.
Requires 18V DC remote power supply (PSK18S).
Diplexed output.
Dual input satellite distribution amplifier capable of powering
both V and H LNBs simultaneously via an onboard regulator.
Dual input satellite distribution amplifier capable of powering
both V and H LNBs simultaneously via an onboard regulator.
POWER INJECTORS
PI-8AL
42
Injector only with LED, use with any Low
Voltage power supply. PAL type connectors.
Catalogue 106
PIK170
Bare ends with Belling Lee connectors 30V
AC/DC.
PIK2000
F Type to DC Plug 30V AC/DC.
PIK2750
F type to bare ends 30V AC/DC.
Amplifiers & Modulators
POWER SUPPLIES FOR MAST AMPLIFIERS
NEW
tiny supply
PS5DCP
5V DC 600mA 3VA max, injector with green
LED indicator, short circuit protected, PAL
connectors.
PSK01
PS12DCP
12V DC 250mA 3VA max, injector with green
LED indicator, short circuit protected, PAL
connectors.
GME 9V DC 200mA supply with injector,
short circuit protected, PAL Male to
Female connectors.
PSK02
PS14DCP
14V DC 215mA 3VA max, injector with green
LED indicator, short circuit protected, PAL
connectors.
GME 22V AC 100mA supply with injector,
short circuit protected, PAL Male to
Female connectors.
24V DC 125mA 3VA max, injector with green
LED indicator, short circuit protected, PAL
connectors.
12V DC 250mA 3VA max, injector with green
LED indicator, short circuit protected,
F Female connectors.
14V DC 215mA 3VA max, injector with green
LED indicator, short circuit protected,
F Female connectors.
PSK06
GME 14V DC 150mA supply with injector,
short circuit protected, PAL Male to
Female connectors.
PSK06F
GME 14V DC 150mA supply with injector,
short circuit protected, F Female connectors.
PSK08
GME 17.5V AC 100mA supply with injector,
short circuit protected, PAL Male to
Female connectors.
PSK08F
GME 17.5V AC 100mA supply with injector,
short circuit protected, F Female connectors.
PSK12F
GME 12V DC 500mA supply with injector,
short circuit protected, F Female connectors.
PSK12S
GME 12V DC 500mA supply, fitted with
2.5mm DC plug.
PSK18F
GME 18V DC 500mA supply, Heavy Duty
fitted with F type Female–Female RF injector.
PSK18KR
GME 18V DC 1700mA supply, Heavy Duty
fitted with 5.5mm DC plug.
PSK18S
GME 18V DC 500mA supply, Heavy Duty
with 5.5mm DC plug. Required for DW42,
MD100 etc.
PS24DCP
PS12DCF
PS14DCF
NEW
F Connector
Injectors
PS17ACP
PS22ACP
PS22ACF
17.5V AC 80mA Linear Power Supply, injector
with green LED indicator, short circuit
protected, PAL connectors.
22V AC 80mA Linear Power Supply, injector
with green LED indicator, short circuit
protected, PAL connectors.
22V AC 100mA Linear Power Supply, injector
with green LED indicator, short circuit
protected, F Female connectors.
Our revised DC supply range features tiny Switch Mode Power
Supplies, which from a wide range of AC input voltages deliver
smooth and regulated DC to your mast amplifier. The small
dimensions of these supplies opens a new era in supply size as
they are around the same size as a mains plug and they meet
the latest MEPS requirements to save electricity and money.
Catalogue 106
43
Amplifiers & Modulators
MODULATORS,, MONO AUDIO
AV TO DIGITAL COFDM MODULATOR
MOD-COFDM
NEW
LM3878
Audio/Video double side band modulator.
UHF output channels.
RF output level 70+ dBμV + or – 5dB.
Converts composite Analogue audio and video (PAL, NTSC or
SECAM) from Video Cameras, Security Cameras, DVD players
and set top boxes into digital terrestrial. Retains picture quality
across small or large distribution networks.
High compatibility with Australian televisions. Excellent
picture quality. (Please see page 127 for more details)
STEREO AUDIO
Now you can make any DVD, Camera or Video and Audio source into a TV channel, and mix it with your off air TV for
distribution to every set on the antenna system.
Full
Stereo
Sound
Full
Stereo
Sound
MD531
MD100VS
44–470MHz. Ch. AU 0–12+ requires 500mA
PSK- 18S or 1700mA PSK18KR.
MD100US
470–860MHz. Ch. AU 20–75+ requires 500mA
PSK-18S or 1700mA PSK18KR.
Double sideband Stereo modulator. Continuous frequency
coverage in 250KHz frequency steps, PLL stable, with 63103dBμV out. Video 1Vpp@75Ω; audio >.1V @10KΩ. Mount
holes 170mm apart. Stand alone or GME Kingray rack
mount option.
Kingray modulator packages available. (See page 130)
Frequency Range
47–862MHz
Channels
0..5A, S1..S10, 6..12, S11..S41,
21..75
Audio/Video input
2 x RCA Audio, 1 x RCA Video
TV output(RF)
F female
Extension input(RF)
F female
Video input level
1,0Vpp (75Ω)
Audio input level
0,2–2,0Vrms(>10KΩ)
Output level
84dBμV
Output level adjust
-15dB
Extension input(RF) loss
0.9dB
Carrier/Noise Ratio (C/N) >58dB
Mains Voltage
240V~ 50/60Hz, 5VA
MD531 is a stereo TV Modulator with features that suit both
professional and domestic applications. Connecting to existing
equipment is simple through the RF Input. F type RF and RCA
AV connectors round out MD531 connectivity. A wide range
of Australian output frequencies between 45 and 860MHz
including S channels can be easily selected. Output level
can be reduced by up to -15dB where necessary or a serious
distribution network of say 30 TVs directly connected. Onboard
mains power supply included!
44
Catalogue 106
3
Contents
Audio/Video Leads,
Cable, Connectors &
Hand Tools
HDMI Accessories
Misc. Adapters
59–61
61–62
Switches, Splitters, Transmitter/Receiver
46
F Connectors
Audio Video Sender
47
Misc. Connectors
62
Remote Control Extenders
47
RJ Plugs
62
Adapters, Repeater, Joiners
48
Cable Installation
Audio Video Accessories & Switches
48
Aids
63
Cable Management
64
Cable & Leads
HDMI Cable
49
Cable Testers
Premium Gold Plated RCA Leads
50
Hand Tools
Patch Cords
50
Cable Prep Tools
General Audio Video Leads, S-Video Leads,
SCART Leads,
TOSLink Leads
51–52
Television Flyleads
53
Coaxial Cable
54
Speaker Cable, Siamese Cable, Ribbon Cable 55
Cable Roller & Network Cable
55
Adapters & Connectors
65–66
Crimping Tools
66
Compression Tools
66
Cable Cutters
67
F Connector Tools
67
Hand Nibbler
67
Data Hand Tools
68
Outlet Plates & Mounting Hardware
Wall Plates & Inserts
Audio Adapters
56–57
RCA Adapters & Connectors
57–58
BNC Adapters
58–59
Terminators
64–65
59
68–72
Skirting Television Outlets
72
Plate Mounting Hardware
73
Baluns
73
Multi-Purpose Work Clothes
74
Catalogue 106
45
Audio/Video Leads, Cable,
Connectors & Hand Tools
HDMI ACCESSORIES
HDMI 3 way Switch
HDMI 5 way Switch
Front
FFront
Back
B
Back
HDMISW1X3
3 input High Speed HDMI switch. Includes
IR remote control, discreet IR code disk and
Power Supply.
HDMISW1X5
5 way High Speed HDMI switch.With IR
remote control and discreet IR codes. Power
Supply included.
HDMI 8 way Splitter
HDMI 2 way Splitter
Front
Front
Back
Back
HDMISP2
2 way High Speed HDMI splitter.1 input to 2
outputs. Power Supply included.
HDMI 8 way Splitter to CAT6/5E
HDMISP8
8 way High Speed HDMI splitter. 1 input to 8
outputs. Power Supply included.
HDMI CAT6/5e Transmitter/Receiver
Front
Back
HDMISP8C6
8 way High Speed HDMI splitter to CAT6/5E. 1
input to 8 outputs. Power Supply included.
Requires 8x HDMICAT6REC receivers.
HDMI 4x2 Matrix Switch
HDMICAT6TX
Sends high resolution HDMI 30 to 40
metres over 1 data cable depending on
cable quality.
HDMICAT6REC
CAT6/5E to HDMI receiver.
HDMI 4x4 Matrix Switch
Front
Front
Back
Back
HDMIMATRIX4X2
46
HDMI Full Matrix 4x2 High Speed HDMI
switch. Any input to any output! Sends
Foxtel, Digital TV, PS3 and your digital
camera to a screen and a projector.
Catalogue 106
HDMI Full Matrix 4x4 High Speed switch.
HDMIMATRIX4X4 Any of 4 inputs to 4 outputs. Power
Supply included.
Audio/Video Leads, Cable,
Connectors & Hand Tools
AUDIO VIDEO SENDER
• Allows transmission of audio and video from your Pay TV, CD, DVD/
Blu-ray Player, CCTV camera or almost any AV device wirelessly.
Coming Soon!
HVS580
• Compatible with Pay TV IR signals.
• Allows operation with your original remote control from another
room through walls, over distances.
• Easy to install — ideal plug and play audio/video transmission and
control solution.
• Sends AV in one direction over a 5.8GHz wireless link and provides a
434MHz return path for IR commands.
• Delivers clear audio and video up to a range of 100 metres based
on clear terrain.
The HVS580 Audio Video Sender with IR Remote
Control Extender allows transmission of Audio and
Video from your Pay TV, CD, DVD/Blu-ray Player,
CCTV camera or almost any AV device wirelessly.
The HVS580 is compatible with Pay TV IR signals. Plug
and play, sends AV in one direction over a 5.8GHz
wireless link and provides a 434MHz return path for IR
commands. IR mouse extension included.
• Uses 5.8GHz to avoid interference from microwave ovens, wireless
(WiFi) networks, Bluetooth or any lower frequency device.
• 8 x 5.8GHz channels selectable, to limit interference from
other devices.
• Concealed high efficiency antennas — inside the receiver
and transmitter.
• Infrared emitter extender with self adhesive pad — sticks to AV
device IR sensor window.
• LED indicates IR transmission activity.
• Compact and sleek profile.
• Meets Low Interference Potential Devices (LIPD) class licence.
REMOTE CONTROL EXTENDERS
AR1817
Coming Soon!
Remote control extender compatible with Pay TV
control signals. 433MHz, up to 100m range.
• Operate your Pay TV, CD, DVD/Blu-ray Player, CCTV Camera,
Projectors or almost any AV device wirelessly from another room.
• Compatible with Pay TV IR control signals.
HIR434
• Allows you to use original remote control from another room.
• Simple to setup and easy to get working.
• Wireless transmission passes Infra-Red signals through walls and over
distances using 434MHz.
• Delivers clear IR signals up to a range of 100 metres based on
clear terrain.
The healing HIR434 IR Remote Control Extender
allows operation of your Pay TV, CD, DVD/Blu-ray
Player, CCTV Camera, Projectors or almost any AV
device wirelessly from another room.
• Concealed high efficiency antennas — inside the receiver
and transmitter.
The HIR434 is compatible with Pay TV IR signals. Easy
set up, wireless transmission passes Infra-Red signals
through walls and over distances using 433.92MHz.
IR mouse extension included.
• LED indicates IR transmission activity.
• Infrared emitter extender with self adhesive pad — sticks to AV
device IR sensor window.
• Weighted base optimises stability of vertical small footprint case.
• Meets Low Interference Potential Devices (LIPD) class licence.
Catalogue 106
47
Audio/Video Leads, Cable,
Connectors & Hand Tools
HDMI Repeater
Component to HDMI Adapter
Front
Back
HDMIREP
Component YPbPr and Audio to HDMI
converter. Power Supply included.
HDMICOMPHDMI
Inline HDMI repeater. Line powered*. Tested
@1080p between 2 x stock 25m cables up
to 50m. *5VDC input allows use in series and
with lossy HDMI leads.
SCART to RCA Adapters
HDMI Joiners
HDMIFF
SRCI01
HDMIMFRA
HDMIDVI
HDMI to DVI adapter.
HDMIFF
HDMI Female to Female joiner.
HDMIMFRA
HDMI Male to Female flexible adapter.
SRCI02
SRCI01
SCART to RCA and SVHS adapter with In /
Out switch.
SRCI02
SCART to RCA and SVHS adapter with In / Out
switch. Nickle plated-silver.
TOSLink Connectors
OTJOIN
OTDIV
OTMADA
OTJOIN
TOSLink jack to TOSLink jack adapter.
OTDIV
Optical Divider 1 in 2 out or 2 in 1 out.
OTMADA
TOSLink jack to mini plug adapter.
AUDIO VIDEO ACCESSORIES & SWITCHES
76BGS36
RCA AV switch. 3 inputs to 1 output, RCA L and R
Audio and Video. Blister packed.
AYUV4RC
AV1100
48
SCART and RCA switch box.
Catalogue 106
The AYUV4RC allows you to connect up to 4
component sources including DVD, STB, Xbox
360, PS3 and more.
- IR Learning
- Remote or manual control
Audio/Video Leads, Cable,
Connectors & Hand Tools
CABLE & LEADS
HDMI CABLE
Budget HDMI Leads
High Speed v1.3b
30AWG
HDMIB1.5 1.5 Metre Budget male A to male A HDMI Lead
HDMIB1.8 1.8 Metre Budget male A to male A HDMI Lead
Elite HDMI Leads
High Speed with Ethernet v1.4
So you can be sure our HDMI cables will provide the
optimal bandwidth link your customers AV devices
demand, our supplier is a full HDMI Adopter. With the
exception of our High Speed budget cables, all our
cables are High Speed with Ethernet, ready for 3D
and more.
Thoroughly tested before packing, our cables provide
HDMI connections you can rely on. Each cable is sealed
in a simple plastic bag and labelled, the savings in
packaging and shipping are reflected in our prices. We
are even ready to help you test your HDMI cables, when
you are.
28 AWG
Premium HDMI leads
High Speed with Ethernet v1.4
28AWG
HDMIe0.5 0.5 Metre Elite, gold plated connectors, 2 tone.
HDMIe1
1 Metre
Elite, gold plated connectors, 2 tone.
HDMIe2
2 Metre
Elite, gold plated connectors, 2 tone.
HDMIe3
3 Metre
Elite, gold plated connectors, 2 tone.
HDMIe5
5 Metre
Elite, gold plated connectors, 2 tone.
NEW 500mm length helps linking products in a stack or a rack.
HDMI Horizontal/Vertical Flexi Connector
High Speed with Ethernet v1.4
HDMIP1
1 Metre
Premium with gold plated flat conn.
HDMIP2
2 Metre
Premium with gold plated flat conn.
HDMIP3
3 Metre
Premium with gold plated flat conn.
HDMIP5
5 Metre
Premium with gold plated flat conn.
HDMIP8
8 Metre
Premium with gold diecast conn. 24AWG
HDMIP10 10 Metre Premium with gold diecast conn. 24AWG
28 AWG
HDMI male Flexi to female
High
g Speed
p
with Ethernet v1.4
28AWG
HDMIHV1
1 Metre
HDMI H/V flexi leads, gold plated.
HDMIHV2
2 Metre
HDMI H/V flexi leads, gold plated.
HDMIHV3
3 Metre
HDMI H/V flexi leads, gold plated.
HDMIHV5
5 Metre
HDMI H/V flexi leads, gold plated.
Ideal for tight spaces, the flexi connectors minimize cable stress
and help to conceal the lead.
That little bit of extra cable length with an easy to conceal
Flexi connector.
HDMIMF0.5 black cable and connectors gold plated.
HDMI type C to type A
High Speed with Ethernet v1.4
Longer HDMI
MI Leads
28AWG
High Speed with Ethernet v1.4
24 AWG
HDMI10 10 Metre
e
tinned copper, gold plated connectors.
HDMI15 15 Metre
ned copper, gold
go plated connectors.
tinned
ed copper,
cop
HDMI20 20 Metre Silver plated
gold pl. connectors.
HDMI25 25 Metre Silver plated copper, gold pl. connectors.
HDMICA3
HDMI cable with type C Mini to type A Standard
HDMI connectors, 3metres long, gold plated
connectors
Catalogue 106
49
Audio/Video Leads, Cable,
Connectors & Hand Tools
PREMIUM GOLD PLATED RCA LEADS
AR5201
Premium 1m 2 x RCA to 2 x RCA flexible cable, nylon sleeve.
AR5202
Premium 2m 2 x RCA to 2 x RCA flexible cable, nylon sleeve
AR5203
Premium 3m 2 x RCA to 2 x RCA flexible cable, nylon sleeve
AR5205
Premium 5m 2 x RCA to 2 x RCA flexible cable, nylon sleeve
AR5301
Premium 1m 3 x RCA to 3 x RCA flexible cable, nylon sleeve
AR5302
Premium 2m 3 x RCA to 3 x RCA flexible cable, nylon sleeve
AR5303
Premium 3m 3 x RCA to 3 x RCA flexible cable, nylon sleeve
AR5305
Premium 5m 3 x RCA to 3 x RCA flexible cable, nylon sleeve
Blue AV cable with quality RCA plugs
AR4209
.9m High Quality 2 x RCA Male to 2 x RCA Male,
Blue 6mmØ x 2.
AR4218
1.8m High Quality 2 x RCA Male to 2 x RCA Male,
Blue 6mmØ x 2.
AR4230
3m High Quality 2 x RCA Male to 2 x RCA Male,
Blue 6mmØ x 2.
AR4309
.9m 3 x RCA Male to 3 x RCA Male, Blue 6mmØ x 3.
AR4318
1.8m 3 x RCA Male to 3 x RCA Male, Blue 6mmØ x 3.
AR4330
3m 3 x RCA Male to 3 x RCA Male, Blue 6mmØ x 3.
AR4350
5m 3 x RCA Male to 3 x RCA Male, Blue 6mmØ x 3.
AR4310
10m 3 x RCA Male to 3 x RCA Male, Blue 6mmØ x 3.
AR4315
15m 3 x RCA Male to 3 x RCA Male, Blue 6mmØ x 3.
AR3309
.9m 3 x RCA Male to 3 x RCA Male, RGB colours 6mmØ x 3.
AR3318
1.8m 3 x RCA Male to 3 x RCA Male, RGB colours 6mmØ x 3.
AR3330
3m 3 x RCA Male to 3 x RCA Male, RGB colours 6mmØ x 3.
AR3350
5m 3 x RCA Male to 3 x RCA Male, RGB colours 6mmØ x 3.
Red Blue Green RCA leads
PCCAT6 Series Patch Cords
50
Catalogue 106
PCCAT6.5
.5m CAT6 Patch Leads.
PCCAT61
1m CAT6 Patch Leads.
PCCAT62
2m CAT6 Patch Leads.
PCCAT63
3m CAT6 Patch Leads.
PCCAT65
5m CAT6 Patch Leads.
Audio/Video Leads, Cable,
Connectors & Hand Tools
GENERAL AUDIO VIDEO LEADS
AR1001
1.8m 1 x RCA Male to 1 x RCA
Male.
AR1202
1.8m piggy back 2 x RCA Male
to x 2 RCA Male.
AR1203
1.8m 2 x RCA Male to 2 x RCA
Male.
AR1204
1.8m 2 x RCA Male to 2 x RCA
Female.
AR1205
1.8m 2 x RCA Male to 1 x
3.5mm stereo Male.
AR1206
1.8m 3.5mm Stereo Male to
3.5mm Stereo Male.
AR1207
1.8m 3.5mm Mono Male to 2 x
RCA Male.
AR1209
1.8m 2 x RCA Female to 2 x
RCA Female.
AR1208
AR1210
1.8m 1 x RCA Male to 2 x RCA
Male.
10m 2 x RCA Male to 2 x RCA
Male.
AR1230
3m 2 x RCA Male to 2 x RCA
Male.
AR1250
5m 2 x RCA Male to 2 x RCA
Male.
AR1307
1.8m 3 x RCA Male to 3 x RCA
Male.
AR1330
3m 3 x RCA Male to 3 x RCA
Male.
AR1310
10m 3 x RCA Male to 3 x RCA
Male.
AR1350
5m 3 x RCA Male to 3 x RCA
Male.
Catalogue 106
51
Audio/Video Leads, Cable,
Connectors & Hand Tools
AR1403
1.8m Gold Plated 2 x RCA Male
to 2 x RCA Male.
AR1407
5RCA To 5RCA Leads
S-Video Leads
VS1084
AR1518
1.8m colour coded component and stereo
audio cable.
AR1530
3m colour coded component and stereo
audio cable.
AR1550
5m colour coded component and stereo
audio cable.
SCART Leads
VS2012
VS2002
VS2018
1.8m 4 x RCA Male to 4 x RCA
Male.
VS2020
VS2KIT
VS1094
VS1084
1.8m S-VHS Video lead, 4 pin MINI DIN Male
to Male.
VS1094
15m S-VHS Video lead, 4 pin MINI DIN Male
to Male.
VS2002
1.5m SCART Male to SCART Male, 21 pins.
VS2010
SCART divider. Male plug to 2 x Female sockets. All
21 pins interconnect.
VS2012
High quality 15m SCART Male to SCART Male, all
21 pins connect.
VS2015
SCART divider. Male plug to 5 x Female sockets in
parallel. All 21 pins interconnect.
VS2018
1.5m SCART to 6 RCA, A&V Stereo VCR etc.
VS2020
1.5m SCART to 4 RCA plugs. Stereo Audio.
VS2021
1.5m SCART to 4 RCA plugs. Mono VCR Audio and
Video to TV etc.
VS2KIT
Video Survival dubbing kit. Many Audio Video
connections possible, in zip top plastic satchel
with hang cell.
TOSLink Optical Fibre Leads Optic Leads
The perfect Digital Audio link, that
excludes the possibility of a ground loop.
OT1018
OTQ009
Premium 0.9m TOSLink male to male Fibre Optic lead.
OTQ018
Premium 1.8m TOSLink male to male Fibre Optic lead.
OTQ030
Premium 3m TOSLink male to male Fibre Optic lead.
Cloth bound TOSLink blister packed leads with gold connectors.
OT1009
0.9m TOSLink male to male Fibre Optic Lead.
OT1018
1.8m TOSLink male to male Fibre Optic Lead.
OT1030
3m TOSLink male to male Fibre Optic Lead.
OT1050
5m TOSLink male to male Fibre Optic Lead.
OT1100
10m TOSLink male to male Fibre Optic Lead.
OT1150
15m TOSLink male to male Fibre Optic Lead.
OT1200
20m TOSLink male to male Fibre Optic Lead.
Flexible rubber coating. Supplied in clear plastic bag.
52
Catalogue 106
Audio/Video Leads, Cable,
Connectors & Hand Tools
TELEVISION FLYLEADS
Premium Flyleads
Quad Flylead For LED/LCD/Plasma Fully
Shielded
d Plugs
FLP*MM
FLP*MF
Flexible stranded centre wire, full copper braiding and
carefully fitted quality black chrome shielded plugs. Premium
Flyleads include Ferrite Suppressor at one end of the cable
assists reducing impulse noise.
FLP1MM
Premium 1m PAL Male to Male.
FLP2MM
Premium 2m PAL Male to Male.
FLP3MM
Premium 3m PAL Male to Male.
FLP5MM
Premium 5m PAL Male to Male.
FLP2MF
Premium 2m PAL Male to F Male.
FLP3MF
Premium 3m PAL Male to F Male.
FLP5MF
Premium 5m PAL Male to F Male.
A short .5m Quadshield lead with 2 x fully
FL0.5MMRRBQUAD shielded right angle connectors under a
unique two tone protective moulding.
Flyleads with Ferrite Suppressors
FLD2MFSW
QuadShield Flyleads, Fully Shielded Plugs
FLD2MMSB
2m PAL Male to Male, shielded Black. With
Ferrite suppressors.
FLD2MMSW
2m PAL Male to Male, shielded White. With
Ferrite suppressors.
Traditional Flyleads
FL18MMSBQUAD
FL10FMSBQUAD
FL10MMRW–FL50MMRW
FL18MMSWQUAD
FL18MFSBQUAD
FL15MFSB
FL15MMSB
1.5m PAL Male to Male, straight plugs Black.
FL15MMSW
1.5m PAL Male to Male, straight plugs White.
FL18MMSBQUAD
1.8m PAL Male to Male, straight Black,
Quad.
FL18MMRW
1.8m PAL Male to Male, straight plug to right
angle plug White.
FL18MMSWQUAD
1.8m PAL Male to Male, straight White,
Quad.
FL30MMRW
3m PAL Male to Male, straight plug to right
angle plug White.
FL18MFSBQUAD
1.8m PAL Male to Female, straight Black,
Quad.
FL50MMRW
5m PAL Male to Male, straight plug to right
angle plug White.
FL18FMSWQUAD
1.8m PAL Male to F Male, straight White,
Quad.
FL10MMRW
10m PAL Male to Male, straight plug to right
angle plug White.
FL10FMSBQUAD
10m F Male to PAL Male, straight Black,
Quad.
FL15MFSB
1.5m PAL Male to Female, straight Black.
FL15MFSW
1.5m PAL Male to Female, straight White.
FL10FFSBQUAD
10m F Male to F Male, straight Black,
Quad.
RG6 QuadShield cable with fully screened connectors that
optimize shielding immunity. Unique two tone plug moulding.
Catalogue 106
53
Audio/Video Leads, Cable,
Connectors & Hand Tools
COAXIAL CALBE
RG59 Coaxial Cable
RG59/30B,
RG59/100B
& RG59/305B
RG59/30B
RG6 Dual Shield Coaxial Cable
RG59 DualShield 30m coil, Black.
RG59/100B
RG59 DualShield 100m plastic spool, Black.
RG59/305B
RG59 DualShield 305m Reel in a box, Black.
RG59/AV3
RG6/30B, RG6/100B,
RG6/100W, RG6/305B
RG59/AV3
RG59 100m AV RGB cable.
.81mm Copper Clad Steel centre, Foam P.E. Dielectric,
NON-bonded Aluminium Foil, 37% braid and Jacket.
RG6/30B
RG6 DualShield 30m coil, Black.
RG6/100B
RG6 DualShield 100m plastic spool, Black.
RG6/100W
RG6 DualShield 100m plastic spool, White.
RG6/305B
RG6 DualShield 305m Reel in a box, Black.
1.02mm Copper Clad Steel centre, Foam P.E. Dielectric,
NON-bonded Aluminium Foil, 40% Braid and Jacket.
Tech Tip:
Need coax for longer baseband Video and Audio runs? RG6 and RG59
TV coax does a surprising job. Crimp and Compression RCA and BNC
connectors finish the job nicely
RG6 Quad Shield Coaxial Cable
RG6Q/30B,
RG6Q/100B
& RG6Q/305B
RG11 Quad Shield Coaxial Cable
RG6Q/30B
RG6 QuadShield 30m coil, Black.
RG6Q/100B
RG6 QuadShield on 100m spool, Black.
RG6 QuadShield 305m Reel in a box,
Black.
RG6 QuadShield 305m drum, Black.
Foxtel Approved.
RG6 QuadShield Flooded 305m
drum, Black.
RG6Q/305B
RG6Q/305FA
RG6QF/305B
RG11Q/305B
RG6Q/150BSIAM
RG6QM/305B
RG6 Quad Messenger 305m, Black.
RG6Q/150BSIAM
RG6 QuadShield 150m drum,
Siamese, Black.
RG6Q/305B/SPOOL
RG6 QuadShield 305m drum, Black.
RG6QLSZH/305B
RG6 QuadShield 305m, Low Smoke
Zero Halogen, Black
1.02mm CCS centre, Foam P.E. Dielectric, bonded Aluminium
Foil, 60% braid, Foil, 40% braid and Jacket.
RG11/BELDEN
RG11 DualShield 305m drum,
Belden Brand.
RG11F/BELDEN
RG11 DualShield Flooded 305m drum,
Belden Brand.
RG11Q/305FA
RG11 QuadShield 305m drum, Black,
PayTV Approved.
RG11Q/305B
RG11 QuadShield 305m drum, Black.
RG11Q/BELDEN
RG11 QuadShield 305m drum, Belden
Brand, Black.
RG11Q/TFC
RG11 QuadShield 305m drum, TFC Brand.
RG11QF/305B
RG11 QuadShield Flooded 305m
drum, Black.
RG11QF/305FA
RG11 QuadShield Flooded 305m drum,
Foxtel Approved.
RG11QF/BELDEN
RG11 QuadShield Flooded 305m drum,
Belden Brand.
1.63mm CCS centre, Foam P.E. Dielectric, bonded Aluminium
Foil, 60% braid, Foil, 40% braid and Jacket.
Tech Tip:
Flooding compound protects against moisture ingress by ‘self healing’ small
areas of jacket damage.
54
Catalogue 106
Audio/Video Leads, Cable,
Connectors & Hand Tools
Audio/Video Cable
300 Ohm Flat Ribbon Cable
TVR300
Ribbon C
Cable Copper 7x.12mm x2, Black
jacket 2x9.5mm.
AVC3356
TV antenna feeder wire on 100m plastic spools. Use with BT1
set balun for PAL type 75Ω set connection.
Speaker Cable
SPK-2144
All copper Siamese Video and Stereo Audio
cable, Blue jacket.
AVC3356 1x6mm Video and 2x3.5mm Audio
coaxes 100m, T138.
Hardline Cable
ble
SPK-2588
SPK-4176
SPK-2144
Speaker Cable, 0.12mmx72x2, 100m.
SPK-2224
Speaker Cable, 0.12mmx7x16x2.
SPK-2588
Speaker Cable, 0.12mmx42x7x2.
SPK-2924
Speaker Cable, 0.12mmx66x7x2 Core.
SPK-4176
Speaker Cable, 0.12mmx88x4, 100m.
JCASS-500-P3
1/2 inch flooded hardline cable.
CATV Accessories listed in MATV section of this catalogue.
Cable Roller
NETWORK CALBE
CABRL32
32mm cable drum roller. Dispense cable
from drums up to 400mm wide and 650mm
in diameter, or several drums at once.
Adjustable drum guides, stable on any
flat surface.
CAT5e/305
Cat5e network cable, Reel in a box 305m.
CAT6/305
Cat6 network cable, Reel in a box 305m.
Catalogue 106
55
Audio/Video Leads, Cable,
Connectors & Hand Tools
ADAPTERS AND CONNECTORS
AUDIO ADAPTERS
56
AA2501
2.5mm Male MONO to
2.5mm Female STEREO.
AA2502
2.5mm Male STEREO to
2.5mm Female MONO.
AA2503
2.5mm Male MONO to
3.5mm Female MONO.
AA2504
2.5mm Male STEREO to
3.5mm Female STEREO.
AA3501
3.5mm Male MONO to
3.5mm Female STEREO.
AA3502
3.5mm Male STEREO to
3.5mm Female MONO.
AA3503
3.5mm Male MONO to RCA
Female.
AA3504
3.5mm Male STEREO to RCA
Female.
AA3505
3.5mm Male MONO to
6.35mm Female MONO.
AA3506
3.5mm Male STEREO to
6.35mm Female STEREO.
AA3507
3.5mm Male MONO to 2 x
3.5mm Female MONO.
AA3508
3.5mm Male STEREO to 2 x
3.5mm Female STEREO.
AA3509
3.5mm Male MONO to 2 x
6.35mm Female MONO.
AA3510
3.5mm Male STEREO to 2 x
6.35mm Female STEREO.
AA3511
3.5mm Male MONO to 2 x
RCA Female.
AA3512
3.5mm Male STEREO to 2 x
RCA Female.
AA6301
6.35mm Male MONO to
3.5mm Female MONO.
AA6302
6.35mm Male STEREO to
3.5mm Female STEREO.
AA6303
6.35mm Male MONO to
6.35mm Female STEREO.
AA6304
6.35mm Male STEREO to
6.35mm Female MONO.
AA6305
6.35mm Male MONO to
RCA Female.
AA6306
6.35mm Male STEREO to
RCA Female.
AA6307
6.35mm Male MONO to 2 x
3.5mm Female MONO.
AA6308
6.35mm Male STEREO to 2 x
3.5mm Female STEREO.
AA6309
6.35mm Male MONO to 2 x
6.35mm Male MONO.
AA6310
6.35mm Male STEREO to 2 x
6.35mm Male STEREO.
Catalogue 106
Audio/Video Leads, Cable
Connectors & Hand Tools
AA6312
6.35mm Male STEREO to 2 x
RCA Female.
AP6302
Phono Plug Male STEREO
6.5mmØ, solder type.
AP6304
Phono Plug Male STEREO
6.5mmØ, solder type.
Gold plated.
2 Pin DIN Speaker Connectors
CDIN2M
IN2M
CDIN2F
AP6301
Phono Plug Male MONO
6.5mmØ, solder type.
AP6303
Phono Plug Male MONO
6.5mmØ, solder type.
Gold plated.
XLR Adapters
CDIN2F
CDIN2M
Male 2 pin DIN.
Screw terminals with screw on cover.
CDIN2F
Female 2 pin DIN.
Screw terminals with screw on cover.
CSVD4
Male 4 pin mini DIN. Solder type for S-VHS etc.
Clamshell inner surrounds connector, outer sleeve
holds securely.
CXLRML
CXLRFL
CXLRMP
CXLRFP
CXLRFL
Female XLR Line 3 pin solder type.
CXLRFP
Female XLR Panel Mount 3 pin solder.
CXLRML
Male XLR Line 3 pin solder type.
CXLRMP Male XLR Panel Mount 3 pin solder.
*Audio, DIN and XLR adapters are ONLY available from Seaford Head Office.
RCA ADAPTERS & CONNECTORS
AARC01
1 x RCA Male to 2 x
RCA Female.
AARC02
1 x RCA Female to 2 RCA
Female
AARC03
2 x RCA Female to 2
RCA Female.
AARC04
1 x RCA Female to 1 x
RCA Female.
AARC05
1 x RCA Male to 2 x 3.5mm
Female MONO.
AARC06
1 x RCA Male to 2 x 6.35mm
Female MONO.
AARC08
2 to 2 x RCA Female with 1
to 1 x S-VHS 4 pin MiniDin.
AARC09
3 to 3 x RCA Female.
Catalogue 106
57
Audio/Video Leads, Cable,
Connectors & Hand Tools
RCA plug to S-Video
Adapter, White.
RCAF01R
RCA Jack solder type, Red.
RCAF01B
RCA Jack solder type,
Black.
RCAF02R
RCA Jack shielded Gold
Red.
RCAF02B
RCA Jack shielded Gold
Black.
RCAM01R RCA plug solder Red.
AARC10
RCAM01B RCA plug solder Black.
RCAM03
RCA plug, shielded, solder
type Gold Plated, Blue cap,
Black or Red stripe.
RG59 RCA compression
connector, crimp RG59
RCAMC59
9.5mmØ, includes
coloured bands.
RCAMC6
RG6 RCA compression
connector, crimp RG6
9.5mmØ, includes
coloured bands.
RCAM59
RCAM6
RCA Male crimp RG6.
RCAM02
RCA plug, shielded, solder
type Gold Plated, Black or
Red stripe.
RCAM01Y RCA plug solder Yellow.
RCA Male crimp RG59.
BNC ADAPTERS
58
BA7004
BNC Male to F Male.
BA7005
BNC Male to F Female.
BA7008
BNC Male to PAL Male.
BA7009
BNC Male to PAL Female.
BA7011
BNC Male to RCA Female.
BA7016
BNC RG59 compression.
BA7017
BNC RG6 compression.
BA7022
BNC Male to 2 x
BNC Female.
BA7024
BNC Female to PAL Male.
BA7025
BNC Female to PAL Female.
BC7003
BNC Male screw and
clamp.
BC7007B
BNC Male twist on RG59
with captive pin.
Catalogue 106
Audio/Video Leads, Cable
Connectors & Hand Tools
BC7009B
BNC Male hex crimp RG59.
BC7009C BNC Male hex crimp RG6.
BC7014
BNC Female panel mount,
solder type.
BC7015
BNC Female panel mount,
solder type.
TERMINATORS
FC7014
F connector 75Ω
terminator.
TE75PAL
PAL Male terminator.
AIDCBT
F Connector 75Ω DC
blocking terminator,
5–3000MHz.
TS2012
Secure, tamper proof F
Male 75Ω terminator.
EC7002
PAL Female crimp RG59
Universal 11mmØ.
MISC. ADAPTERS
EC7001
PAL Male crimp RG59
Universal 11mmØ.
EC7003
PAL Male screw
and clamp.
EC7004
PAL Female screw
and clamp.
EC7005
PAL Male recessed
phillips screw.
EC7006
PAL Female
recessed screw.
EC7007
PAL Male right angle,
fully shielded.
EC7008
PAL Female right angle,
fully shielded.
EC7009
PAL Male crimp RG6
Universal 11mmØ.
EC7010
PAL Female crimp RG6
Universal 11mmØ.
EC7011
PAL Male to PAL Male.
Also available in all
metal (EC7011M).
EC7012
PAL Female to PAL Female.
Also available in all
metal (EC7012M).
EC7013
PAL Male to PAL Female.
EC7014
PAL Male right angle to
PAL Female.
Catalogue 106
59
Audio/Video Leads, Cable,
Connectors & Hand Tools
EC7015
PAL Male twist on RG6
6.5mmØ.
EC7016
PAL Male to F Female.
EC7017
PAL Male to RCA Female.
EC7018
PAL Female to
RCA Female.
EC7019
RCA Male to PAL Female.
EC7020
PAL Female to 3.5mm
MONO, Male.
EC7022
PAL Female Panel mount,
crimp and solder type.
EC7023
F Female to PAL Male
right angle.
EC7024
PAL Female Panel mount,
solder type.
EC7025
PAL Female to Female
panel mount adapter.
EC7026
PAL Male RG6Quad
compression.
EC7027
PAL Female
RG6Quad compression.
FA7001
F Female to F Female joiner.
FA7001N
Optional lock nut
for FA7001.
FA7002
F Female to F Female
tested to 3GHz.
FA7004
F Male to F Male thread.
FA7005
F Male Quick to F
Male Quick adapter.
FA7013
F Female to RCA
Male adapter.
FA7015
Adaptor F Female to RCA
Female.
FA7017
F Male to PAL
Female adapter.
FA7019
F Female to PAL Female.
FA7014
FA7016
60
F Male to RCA
Female adapter.
F Male Quick to RCA
Female adapter.
FA7018
F Male to PAL
Male adapter.
FA7022
F Male to F Female
right angle.
Catalogue 106
FA7023
F Male quick fit to F Female
right angle.
Audio/Video Leads, Cable
Connectors & Hand Tools
FA7024
FA7026
F Male quick fit to F Female.
FA7025
F Male to F Female
right angle 3GHz.
F Female to Quick F
Male 3GHz.
F CONNECTORS
FC7001B
F connector RG59 with
separate crimp ring.
FC7001C
F connector RG6 with
separate crimp ring.
FC7002B
F connector hex crimp
RG59 Universal 11mmØ.
FC7002C
F connector hex crimp RG6
Universal 11mmØ.
FC7003C
F connector RG6
budget connector.
FC7004B
F connector O ring and
silicone grease weather
seal for RG59 9.5mmØ.
FC7004C
F connector O ring and
silicone grease weather
seal for RG6 pre-crimp
9.5mmØ.
FC7005
F connector RG11 captive
reducing pin 13.5mmØ.
FC7005L
F connector RG11 loose
reducing pin 13.5mmØ.
FC7006B
F twist on RG59 cable
entry 5.5mmØ.
FC7006C
F twist on RG6 cable
entry 6.5mmØ.
FC7006D
F twist on RG6Quad cable
entry 7.00mmØ.
FC7007
F connector compression
RG11 foxtel approved.
FC7008C
Universal push on F
connector for RG6 dual
and quad.
FC7009B
F connector fast twist RG59
cable entry 5.25mmØ.
FC7009C
F connector fast twist RG6
cable entry 6.25mmØ.
FC7010
F Female RG59 crimp.
FC7011
F connector Female RG59
Universal 11mmØ.
FC7012
F connector Female RG6
Universal 11mmØ.
FC7013C
F connector compression
RG6 universal, dual o ring,
unibody, 3GHz.
Catalogue 106
61
Audio/Video Leads, Cable,
Connectors & Hand Tools
FC7016
RG11 low profile F crimp
connector.
FC7017
F connector compression
RG6Q cable entry 8mmØ.
FC7018
F connector compression
RG6 dual.
FC7019B
F connector conical crimp
RG59.
FC7019C
F connector conical
crimp RG6.
FC7022
F connector compression
RG6Q cable (Foxtel
approved).
FC7023
F connector compression
RG11Q cable (Foxtel
approved).
FC7024
F connector bulk head
with nut and washer.
Solder type.
FCBOOT
Weatherproof F
connector boot.
CJ59H
Coax Joiner crimp RG59
9.5mmØ.
FC7025
FCGB1
F connector PCB mount.
F Female.
F connector
grounding block.
MISC. CONNECTORS
CEF8
Cable Entry Flange 8mmØ
cable entry for 10-12mmØ
hole, 31mmØ.
CJ6H
Coax Joiner crimp RG6
Universal.
CJ75SC
Coax Joiner Screw and
clamp.
NC7015
N type 50Ω Female panel
mount.
TC7001
TNC Male RG58 Gold
Plated pin.
TC7002
TNC Male fast RG58 Gold
Plated captive pin.
UHF/PL259 type, Male
UC7002A solder, heat resistant, cable
entry 5.4mmØ.
RJ Plugs
RJ126P6C
62
RJ458P8C
Catalogue 106
RJ458P8CSLD
RJ126P6C
6 position modular solid cable.
RJ458P8C
8 position modular plug for solid cable.
RJ458P8CSLD
8 position modular plug for stranded cable.
Audio/Video Leads, Cable,
Connectors & Hand Tools
CABLE INSTALLATION
CABLE INSTALLATION AIDS
Fibre glass Rod
MAGICSTRIP
RT3
Fibre glass 3 Metre x 4.75mm rod, cable
installation aid.
RT6
Fibre glass 6 Metre x 4.75mm rod, cable
installation aid.
Push the magic strip up the wall cavity and feed your cable
through the wall by pulling the magic strip through the
installation hole. Bright yellow colour easy to locate. 3.6m
long x 15mm x 4mm. Store in side of extension ladder or
conduit to keep flat.
CMS Rods & Accessories
PVC Tape
CMS-EYE
CMS-GRABBIT
PVCBK
20m x 18mm x .18mm Plastic Tape.
NITTO11
Self Fusing or Amalgamating Tape.
10m x 19mm x .5mm.
CMS-HOOK
CMS-ROD
C6RB
C7RB
C6RB
100x6mm cable clip. 6mm round black with larger
nail, RG59 and RG6 Dual.
C7RB
100x7mm cable clip. 7mm round black with larger
nail, RG6Q.
C7S1B
CMS-EYE
Brass eye screws onto Male CMS-ROD.
CMS-GRABBIT HOOK
Self directional hook for CMS-ROD.
CMS-HOOK
Hook screws onto Male CMS-ROD.
CMS-ROD
Easy to carry cabling aid. 1.5m fibre
glass rods threaded to allow linkage
end to end.
CABLETIDY
C7S2B
Neatly and easily binds bundles of cables up to 16mmØ
together. Each Cable Tidy Kit includes a 3m length of
FlexiCord and an Easy Clip applicator, which makes
installation as simple as doing up a zip. Colour carton
includes clear instructions and before and after pictures.
C7S1B
Cable clip 7mm screw for single cable.
C752B
Cable clip 7mm screw for double cable.
Catalogue 106
63
Audio/Video Leads, Cable,
Connectors & Hand Tools
CABLE MANAGEMENT
Cable Stapler
JY667
Cable Tacker for up to 7mmØ round and 10mm
wide flat cables. Patented staple shape suits
round or flat cable types. 2 staple sizes 1407R for
RG6 and 1405R for RG59 etc. 100 White x 1407R
staples included with each tool. Blister packed.
Cable Ties
CT100
100mm x 2.5mm black, bag of 100.
CT190
190mm x 4.8mm black, bag of 100.
CT300
280mm x 4.8mm black, bag of 100.
Tech Tip:
Don’t overtighten on coaxial cable as cable ties indent
coax causing reflections!
Cable Tie Puller and Cutter
Cable Staples
HT218
1405RB
200 x blister Black cable staples. For 4 to 6mmØ
round and 2.5 to 4mm high by up to 8mm wide
flat cables.
1405RW
200 x blister White cable staples. For 4 to 6mmØ
round and 2.5 to 4mm high by up to 8mm wide
flat cables.
1407RB
200 x blister Black cable staples. For 6 to 8mmØ
round and 4.5 to 6.3mm high by up to 10mm wide
flat cables.
1407RW
200 x blister White cable staples. For 6 to 8mmØ
round and 4.5 to 6.3mm high by up to 10mm wide
flat cables.
CABLE TESTERS
CLT2
64
Catalogue 106
Tighten cable ties and cut off excess in one
easy action. Predetermined cut off pressure is
adjustable. Fast and repeatable, makes the
neatest of wiring looms.
Cable line tracer. LED and buzzer to identify
cables, F connectors.
Audio/Video Leads, Cable,
Connectors & Hand Tools
HDMI Cable Tester
Wire Tracker
Coming Soon!
NEW!
WIRETRACKER
Locates wires by a distinctive tone.
Generator and sensitive tracer included with
a range of accessories and carrying case.
• Easily trace and identify coaxial / telephone / LAN or any
metal cable.
HDMITESTER
Check your HDMI cables for continuity,
crossed pairs and open wires in 2 seconds.
Sweeps each conductor in a HDMI cable and gives an almost
instant response showing pass, open, cross or short on a wire
by wire basis. Separate receiver (included) enables you to
check even installed cables.
• Test LAN and telephone cable condition, wire by wire.
• Bright LED light on probe assists your work in dark corners.
HAND TOOLS
CABLE PREP TOOLS
AS2010
AS3106
Round cable stripper. Blades at both ends, spring
loaded with locking mechanism. Rotate to cut
insulation and pull to strip.
Popular 2 blade rotary stripping tool with rollers
and scrap ejectors. Suits RG6, RG59 or any cable
between 4.9 and 7.5mmØ. Replacement blades
also available (AS8106).
AS3006
Preset 2 blade stripper for RG6 and RG59. Bright
yellow colour makes it harder to loose.
AS3811
3 blade stripper for RG11, RG213 or any cable
between 4.9mm to 11mmØ. Solid metal
construction promises years of use. Includes rollers
and scrap ejectors. Hex Key adjustable. Hex Key
and Spare Blades included. 122mm long. Blister
Packed. Replacement blades also available
(AS8811).
Catalogue 106
65
Audio/Video Leads, Cable,
Connectors & Hand Tools
COMPRESSION TOOLS
HT501
HLHT106
Universal cable stripper for round cables up to
9.5mmØ, multi conductor round and flat cables.
DL518
3 in 1 compression tool, includes all RG59 and RG6
converters, plastic ergonomic grips.
DL807
Adjustable RG6 & RG59 linear compression tool,
includes convertors, fully adjustable. 19cm long.
.500 Hardline cable coring and stripping tool.
CRIMPING TOOLS
HT807RG611
DL806H
DL806J
HT106A
66
Adjustable RG11 & RG6 linear compression
tool, includes convertors, fully adjustable.
Hexagon crimp tool Heavy Duty, 9.12mm/.360”,
8.2mm/.324”. Suits 11mmØ and 9.5mmØ RG6 and
RG59 connectors.
DL808
Linear compression tool, Heavy Duty. Adjustable
to suit almost any RG11, RG6 or RG59 compression
type connector. 17cm long.
HT507
Radial compression tool, 23cm long. High RF
quality thanks to cone shape. Simple to use
with easy latch mechanism. Suits RG6 and RG59
radial / conical connectors.
Hexagon crimp tool Heavy Duty, 12.0mm/.472”,
9.18mm/.361”. Suits 11mmØ RG6, RG59 and
13.5mmØ RG11 connectors.
Hexagon crimp tool Heavy Duty, 6.48mm/.255”,
.4mm/.213”, and 1.72mm/.068”. Suits BNC
connector etc. that require centre pin crimp.
Catalogue 106
Audio/Video Leads, Cable,
Connectors & Hand Tools
CABLE CUTTERS
HT109
DL501
SA504B
Cable cutter, spring loaded with insulated
grip handles. Cuts steel centre coax OK.
HT109
Mini Cutter, 13cm long. Insulated handles, spring
opening, great in tight spaces with small cables.
SA503B
5” side cutter pliers, like HT109.
SA504B
Mini Long Nose Pliers, 14cm long. Insulated
handles, spring opening, serrated jaws hold
on tight.
F CONNECTOR TOOLS
TS1949
HT2206F
206F
Access F connectors in tight areas. Also assists
fitting F connectors to
t cable.
HT224A
T-Tool, for F connector.
HT224D
3 in 1 tool. One end to enlarge space between
shield and insulation for RG59 and other end for
RG6. The other end provides substantial grip and
leverage for fitting F connectors. Comfortable
ergonomic grip.
HT224
T Tool, provides substantial grip and leverage
for fitting F connectors. Saves your skin for better
things.
Tamper proof F connector cover fitting tool.
Makes connector access very difficult without
TS1949 tool.
HT224A
HT224
HT224D
HAND NIBBLER
HT204
Nibbler, cuts any shape in copper, plastic
or aluminium up to 18 gauge. Handy for
car radio installation and cutting light steel
appliance cabinets.
Catalogue 106
67
Audio/Video Leads, Cable,
Connectors & Hand Tools
DATA HAND TOOLS
DL2668R
DL314KR
RJ45 data and RJ11 phone Cut Strip Crimp tool.
HT182N
RJ11 and RJ45 data connector handtool.
Network cable punch down tool. Inserts
cable into mechanism and trims to length.
Includes handy belt scabbard (pouch).
OUTLET PLATES & MOUNTING HARDWARE
Five different series outlet plate styles compatible with popular Australian electrical switches and GPOs.
WALL PLATES — SERIES 1
WP5
One PAL type outlet screw and saddle.
WP5/ISOL
One PAL type 2kV isolated outlet, for extra
safety.
WP5F
One PAL type outlet with F Female input, fully
screened.
WPDE
Two PAL outlets from one input @-4dB. Suits TV
displays, etc.
WPF
One F Female outlet and input, fully screened.
WPFTAP
One PAL outlet and one F outlet for Free To Air
and PayTV. Dual F Type inputs.
68
Catalogue 106
Audio/Video Leads, Cable,
Connectors & Hand Tools
WPSPL
One PAL outlet @-4dB with rear Input and
Output.
WPTVFM
One PAL TV outlet and one PAL FM outlet.
Integrated TV FM separator.
WPVCR/TV
Three PAL TV outlets marked ready for VCR /
DVD system.
WPB
Blank plate, cover mistakes etc.
WALL PLATES — SERIES 2
WPBP2
Two Binding Posts, polarised Red and Black.
Screw down terminal or Banana Plug.
WPBP4
Four Binding Posts, polarised Red and Black.
Screw down terminal or Banana Plug.
WPRCA2
Two RCA type Female terminals with solder
connection on rear. Red and Black polarity
indicators.
WPRCA4
Four RCA type Female terminals with solder
connection on rear. 2 x Red and Black polarity
indicators.
White outlet plates with Binding Posts for loudspeakers and RCA connectors for High Ω Video and Audio.
WALL PLATES — SERIES 3
Bull nose wall plates provide a simpler way to run your cables into the cavity. These plates have a large opening which can
accommodate the thickest HDMI and speaker cables, even power cables where pratical. Brush accessory is included to make
the finish as neat as possible.
WPCBRUSH
Pass cables straight through for neat result
even in tight space.
WPBULLSLIMW
Bull Nose Wall Plate with slimline nose.
Catalogue 106
69
Audio/Video Leads, Cable,
Connectors & Hand Tools
WPBULLNOSEB
Bull Nose Wall Plate, Black. Opening 65mm
wide x 30mm deep.
WPBULLRECESSB
Bull Nose Wall Plate with recessed nose,
Black.
WPBULLNOSEW
Bull Nose Wall Plate, White. Opening 65mm
wide x 30mm deep.
WPBULLRECESSW
Bull Nose Wall Plate with recessed nose,
White.
WALL PLATES — SERIES 4
WPC1
WPC2
WPC3
WPC6
WPC4
WPCS2
WPCS1
WPCB
One socket fitted
WPC1
Premium Wall plate, 1 gang insert.
WPC2
Premium Wall plate, 2 gang inserts.
WPC3
Premium Wall plate, 3 gang inserts.
WPC4
Premium Wall plate, 4 gang inserts.
WPC6
Premium Wall plate, 6 gang inserts.
Internal View
WPCB
Premium Wall plate, Blank.
WPCS1
Skirting board outlet for single data/phone
socket insert.
WPCS2
Skirting board outlet for dual data/phone
socket inserts.
These “Clip In” Wall Plates match popular Australian flush Wall Plates.
WALL PLATES — SERIES 5
WPCC1
WPCC2
WPCC3
WPCC4
WPCC1
Wall plate, 1 gang insert.
WPCC4
Wall plate, 4 gang inserts.
WPCC2
Wall plate, 2 gang inserts.
WPCC6
Wall plate, 6 gang inserts.
WPCC3
Wall plate, 3 gang inserts.
These “Clip In” Wall Plates match popular Australian “classic” flush Wall Plates.
70
Catalogue 106
WPCC6
Audio/Video Leads, Cable,
Connectors & Hand Tools
INSERTS — SERIES 4 & SERIES 5
WPMCBPGB
Black Binding post insert.
WPMCBPGR
Red Binding post insert.
WPMCHDMI
WPMCHDMIRA
WPMCRCAF
WPMCFF
F to F type insert.
RCA to RCA insert
(available in Red, White,
WPMCRCARCA
Yellow, Green, Blue
and Black).
WPMCRJ45
RJ45 network insert.
WPMCRJ11
RJ11 telephone insert.
WPMCB
Blank insert to cover
unused holes in plates.
HDMI to HDMI straight
insert.
WPMCFF3
WPMCPF
WPMCCAT6
HDMI to HDMI right angle
insert.
RCA to F Female insert
(available in Red, White,
Yellow, Green, Blue and
Black).
F to F type insert, 3GHz.
PAL to F type insert.
CAT6 network insert.
These Wall Plates inserts “Clip In” from the rear.
Build your outlets to suit each task TV, FM, AV, and Data.
WALL PLATES & INSERTS — SERIES 6
WPE1
WPE2
WPE1
Wall plate, 1 mech insert.
WPE2
Wall plate, 2 mech inserts.
WPE3
Wall plate, 3 mech inserts.
WPE4
Wall plate, 4 mech inserts.
WPE6
Wall plate, 6 mech inserts.
WPE3
WPE4
WPE6
PDL type wall plates and a broad range of extra low voltage
mechanisims make almost anything possible!
Catalogue 106
71
Audio/Video Leads, Cable,
Connectors & Hand Tools
WPM500B
Blanking insert. Fill unused
WPE holes.
WPM619M4
RJ11 phone socket looping,
White.
WPM619KC
WPME
Wall plate key stone type
jack adapter.
Empty insert, 9.9mmØ 1mm
hex hole.
WPMFF
F to F type insert.
WPM619MM
Wall plate insert, Clipsal
adapter.
WPMFFP
F to F type insert (Foxtel
Approved F10448).
WPMBPB
Binding Post plastic, Black.
WPMPF
PAL to F type TV insert.
WPGBPR
Binding Post plastic, Red.
WPMBPGR
Binding Post gold plated,
Red.
WPMBPGB
Binding Post gold plated,
Black.
WPMRS
RCA Solder, Red, Black,
Blue, Green, Yellow and
White.
WPMRF
RJ45KS
WPMHDMI
RCA to F Female insert,
Red, Black, Blue, Green,
Yellow & White.
Cat5E requires WPM619KS
adapter, Blue, Green, Red,
Yellow & White.
HDMI to HDMI straight
insert.
SKIRTING TELEVISION OUTLETS
Simple TV outlet assemblies, designed to screw to your skirting
board but will fit almost any flat surface. Drill pilot holes please.
EU503
Skirting socket, PAL outlet, saddle and screw on rear.
EU503DE
Skirting socket, 2x PAL Female, saddle and screw on rear.
EU503F
Skirting socket, F - F connector.
EU503ISOL Skirting socket, PAL isolated, saddle and screw on rear.
EU503PF
72
Skirting socket, PAL - F Type.
Catalogue 106
EU503
EU503DE
EU503F
EU503ISOL
Audio/Video Leads, Cable,
Connectors & Hand Tools
BALUNS
PLATE MOUNTING HARDWARE
Improves the efficiency of transfer of signal energy from an
antennas dipole typically 300Ω to TV coax cable’s 75Ω.
CLI449A
CLI449AS
CLI449A
Mounting Block 34mm.
CLI449AS
Mounting Block 10mm.
WPRECW
2030SC
300-75Ω Weatherproof antenna balun with screw
and clamp terminals and solid wires.
2030F
300-75Ω Weatherproof antenna balun with
Female F connector and solid wires.
MHBT
300-75Ω telray DL type weatherproof masthead
balun with aluminium strap antenna connections.
MHBTW
300-75Ω telray DL type weatherproof balun with
wire antenna connections. UV stable plastic.
BT1
300-75Ω set balun, 300Ω screw terminals to PAL
Male connector.
BT2F
75-300Ω set balun, F Female connector to 300Ω
ribbon with spade lugs.
BT2PAL
75-300Ω set balun, PAL Female connector to 300Ω
ribbon with spade lugs.
Recessed mounting point.
Set your AV connectors and power points back by 60mm to
conceal bulky plugs behind flat televisions refrigerators etc.
Includes steel mounting clip.
WBS
WCP
WBS
Stud mounting bracket for W series plates. Nails
to stud for secure fix. Also suits power points etc.
WCP
Plaster mounting clip for W series outlet plates.
Also suits power points, switches etc.
Catalogue 106
73
Audio/Video Leads, Cable,
Connectors & Hand Tools
MULTI-PURPOSE WORK CLOTHES
A new style of work clothes for Australians. Multi pocket pants with internal/external knee pad pockets and zip away sections.
Also a zip up vest with more pockets. Now you can carry tools and materials, leaving both hands free to work!
• Holster pockets with extra compartments. Inset front
pockets. Inset back pockets. Leg pocket with extra
compartment. Rule pocket with knife compartment.
Leg pocket with flap and phone compartment. External
reinforced knee pockets.
• Material: 65% polyester/35% cotton, 260g/m2.
AS/NZS 4399 Sun Protection Clothing Classification — rated UPF
50+ for excellent protection
• Hip pocket for phone. Slanted front pockets. Back patch
pockets, right with flap. Leg pocket with flap. Leg pocket
with ruler compartment. Internal knee pockets.
• Material: 65% polyester/35% cotton, 260g/m2.
AS/NZS 4399 Sun Protection Clothing Classification — rated
UPF 50+ for excellent protection.
Not suitable for prolonged kneeling.
• Right back pocket with flap. Inset front pockets. Phone
pocket. Right leg pocket with pen holder and rule pocket.
Left leg pocket with flap.
• Material: 65% polyester, 35% cotton, 260g/m2.
AS/NZS 4399 Sun Protection Clothing Classification — rated
UPF 50+ for excellent protection
• Inset pockets at front and back and no knee pad
pockets. Left leg pocket with zip and open compartment.
Phone pocket on right leg.
• Material: 65% polyester/35% cotton, 190g/m2.
ARKANSAS Work Vest
• Four Cordura®-reinforced holster pockets that can be tucked away
individually. Two breast pockets equipped with a pen holder, attachments
for a knife sheath and more on both sides. ID-card pocket. Telephone
pocket with e-care, which helps shield the body from the phone radiation.
Wear-resistant support belt with sturdy loops and a plastic buckle.
• Material: 100% cotton, 375 g/m².
74
Catalogue 106
4
Contents
Diplexers,
Filters &
Passives
Splitters / Power Dividers
Antenna Switch
82
76–77
Terminators
82
2GHz Splitters
77
Attenuators
Plug In PAL Type Splitters 1GHz
78
Fixed Attenuators
83
Variable Attenuators
83
Terrestrial 900MHz
Taps & Couplers
1GHz Taps/Couplers
Multitaps
78–79
Fracarro Band & Channel Pass Filters
84
Multi Band Pass Filter Combiner
84
FM Rejection Filters
85
Notch Filters
85
80–81
Filter Housings
85
Set Diplexers
82
Braid Breakers
86
Satellite I.F./Terrestrial Diplexers
82
Isolators
86
Satellite Directional Couplers
Antenna Stacking Couplers
79
Filters & Isolators
79–80
82
Diplexers & Multiplexers
Band Mixers Or Separators
Catalogue 106
75
Diplexers, Filters & Passives
SPLITTERS / POWER DIVIDERS
TERRESTRIAL 900MHz
SP275F
DC
PASS
SP275FG
TO AMP
AIR SUSPENDED
CONSTRUCTION
N
SP475FG
EU222
2 way screw and saddle, One Port Power pass.
SP275F
2 way F type splitter, power pass one port.
EU223
3 way screw and saddle, One Port Power pass.
SP275FG
2 way small F type splitter, power pass one port.
EU224
4 way screw and saddle, One Port Power pass.
SP475FG
4 way F type splitter, power pass all ports.
One Port Power
er pass 5 to 900MHz
900M splitters, glass fibre PCB construction with equalization and impedance matching.
SP275FP
2 way F type, power pass
one port. Insertion loss
-3.5dB @ 500MHz.
SP375FP
3 way F type, power pass one
port. Insertion loss -5.5dB @
500MHz. Balanced ouputs.
SP475FP
4 way F type, power pass
one port. Insertion loss -7dB
@ 500MHz.
Tech Tip:
Sometimes called Power Dividers, splitters divide or mix R.F. power across their entire bandwidth, unlike diplexers etc. that are frequency selective.
SP675FP
6 way F type, power pass one port.
Insertion loss -10.5dB @ 500MHz.
SP875FP
8 way F type, power pass one port.
Insertion loss -10.5dB @ 500MHz.
SP1275FP
12 way F type, Power pass one port.
Insertion loss -12dB @ 500MHz.
SP1675FP
16 way F type, Power pass one port.
Insertion loss -14dB @ 500MHz.
76
Catalogue 106
Diplexers, Filters & Passives
Higher isolation and return loss 900HMz splitters. Port positions enable neater results and better weather protection.
RF shielding ≥120dB.
SP275FPV
2 way F type, power pass
one port. Insertion loss
-3.5dB @ 500MHz.
SP375FPV
3 way F type, powerr pass one
port. Insertion loss -3.5, -3.5,
-7dB @ 500MHz. Unbalanced.
SP475FPV
4 way F type, power pass
one port. Insertion loss -7dB
@ 500MHz.
2GHz SPLITTERS
PA2
2 way, Split Loss ≤5.5dB, Isol. ≥20dB. 5–2400MHz.
PA3
3 way, Split Loss ≤10dB, Isol. ≥22dB. 5–2400MHz.
PA4
4 way, Split Loss ≤11dB, Isol. ≥26dB. 5–2400MHz.
AISP2
2 way, Split Loss ≤5.5dB, Isol. ≥20dB. 5–2400MHz.
PA6
6 way, Split Loss ≤13.5dB, Isol. ≥22dB. 5–2400MHz.
AISP4
4 way, Split Loss ≤11dB, Isol. ≥26dB. 5–2400MHz.
PA8
8 way, Split Loss ≤15.5dB, Isol. ≥20dB. 5–400MHz.
All Port Power pass splitters. Quality construction. Higher
solation and return loss. Port positions permit neater results and
isolation
better weather protection. Shielding ≥120dB.
All Port DC pass via diode control. High quality PCB
construction with high isolation and return loss. Port positions
result in easier installation in smaller spaces. Shielding ≥120dB.
SP22GDV
2 way, Split Loss ≤5.5dB, Isol. ≥20dB.
PayTV approved.
SP6125
2 way Satellite Splitter, Power pass All Ports,
Diode Control.
SP32GDV
3 way, Split Loss ≤10dB, Isol. ≥22dB.
SP6126
2 way Satellite Splitter, Power pass 1 Port.
SP42GDV
4 way, Split Loss ≤10dB, Isol. ≥22dB.
SP6127
4 way Satellite Splitter, Stripline technology, Power
pass All Ports.
5–2,050MHz Premium Quality Inductive splitters with all input
and output ports on one side. All port Power pass with Diode
Control. High Return Loss. Loss and Outlet to Outlet isolation
shown at 1,750MHz.
Low loss 900–2,050MHz Strip Line splitters with slightly higher
attenuation over 40–860MHz. Quality without a high price tag.
Tech Tip:
Splitters with Diode Controlled Power pass permit any receiver connected
to power the LNBF. However the higher voltage will rule the polarity switch.
Alternately the One Port Power pass solution requires the receiver connected
to the Power pass to always be connected if the other receivers are to
function.
Catalogue 106
77
Diplexers, Filters & Passives
PLUG IN PAL TYPE SPLITTERS 1GHz
SUVTM
2 way splitter PAL type connectors, Metal.
Male input to 2 x Female outputs. Power pass all ports.
SUVTP
2 way splitter PAL type connectors, Plastic.
Male input to 2 x Female outputs. Power pass all ports.
TAPS & DIRECTIONAL COUPLERS
1GHz
Quality 5-1,000MHz F connector taps or couplers. High isolation, Return Loss ≥18dB @ 500MHz.
FA4-12
FA1-8
Taps
FA2-8
Tap Value
In-out loss @500MHz
FA1-6
1 tap
-6.5dB
-2.0dB
FA1-8
1 tap
-8.5dB
-2.0dB
FA1-10
1 tap
-10dB
-1.3dB
FA1-12
1 tap
-12.5dB
-0.8dB
FA1-16
1 tap
-16dB
-0.8dB
FA1-20
1 tap
-20dB
-0.6dB
FA1-24
1 tap
-24dB
-0.6dB
FA1-30
1 tap
-30dB
-0.6dB
FA2-8
2 taps
-8.5dB
-4.0dB
FA2-10
2 taps
-10dB
-3.0dB
FA2-12
2 taps
-12.5dB
-1.8dB
FA2-16
2 taps
-16dB
-1.0dB
FA2-20
2 taps
-20dB
-1.0dB
FA2-24
2 taps
-24dB
-0.6dB
FA2-30
2 taps
-30dB
-0.6dB
FDC12B
1 out -12dB, insertion loss 1dB.
FDC17B
1 out -17dB, insertion loss 1dB.
FDC23B
1 out -23dB, insertion loss 1dB.
Low cost directional couplers, Air Suspended construction.
78
Catalogue 106
Taps
Tap Value
In-out loss @500MHz
FA4-10
4 taps
-10dB
-6.0dB
FA4-12
4 taps
-12dB
-4.0dB
FA4-14
4 taps
-14dB
-2.5dB
FA4-16
4 taps
-16dB
-1.7dB
FA4-18
4 taps
-18dB
-1.5dB
FA4-20
4 taps
-20dB
-1.3dB
FA4-24
4 taps
-24dB
-0.6dB
FA4-27
4 taps
-27dB
-0.6dB
FA4-30
4 taps
-30dB
-0.6dB
FA8
FA8-14
Taps
Tap Value
In-out loss @500MHz
FA8-14
8 taps
-14dB
-3.9dB
FA8-16
8 taps
-16dB
-2.4dB
FA8-18
8 taps
-18dB
-2.0dB
FA8-20
8 taps
-20dB
-1.4dB
FA8-24
8 taps
-24dB
-1.2dB
FA8-27
8 taps
-27dB
-1.0dB
FA8-30
8 taps
-30dB
-0.6dB
Diplexers, Filters & Passives
1GHz MULTITAPS
Multiple tap values in one device help equalize
signal levels in star wired 5-860MHz MATV systems.
Power pass from in to out. Specifications at 500MHz.
Return Loss ≥20dB.
CD264/CAD14 etc. in
optional CN9 housing
FA4MT
Tech Tip:
CD models use ferrite whilst CAD models use
stripline technology to provide higher loss
at lower frequencies thereby helping
equalise cable losses at higher frequencies.
Unique Fracarro high performance couplers provide the
convenience of screw and saddle thanks to precision design
and unique shielded terminals.
Taps
Tap Value
In-out loss @ MHz
CAD11
1 tap
-27/12dB
-0.1-0.7dB
CAD12
2 taps
-27/13dB
-0.1-0.8dB
CAD13
3 taps
-27/15dB
-0.2-2.0dB
CAD14
4 taps
-27/15dB
-0.1-1.9dB
CN9
CD11
1 tap
-10dB
-0.8-1.1dB
1 tap
-14dB
-0.3-0.5dB
CD201
1 tap
-20dB
-0.2-0.6dB
CD261
1 tap
-26dB
-0.2-0.7dB
CD12
2 taps
-10dB
-1.3-1.8dB
CD142
2 taps
-14dB
-0.6-1.1dB
CD202
2 taps
-20dB
-0.6-1.1dB
CD262
2 taps
-26dB
-0.7-1.2dB
CD144
4 taps
-14dB
-0.8-2.8dB
CD204
4 taps
-20dB
-0.3-1.2dB
CD264
4 taps
-26dB
-0.3-1.2dB
-13dB/-14dB/-15dB/-16dB.
In to out insertion loss -4dB.
FA6MT
-13dB/-14dB/-15dB/-16dB/-17dB/-18dB.
In to out insertion loss -6dB.
FA8MT
-13dB/-14dB/-15dB/-16dB/-17dB/-18dB/-19dB/-20dB.
In to out insertion loss -8dB.
2GHz MULTITAPS
4–2,300 MHz 4 output Multitaps. The quality way to
distribute QPSK Satellite 1st IF. In to out loss quoted
@ 1,750MHz.
Optional housing for FR couplers.
CD141
FA4MT
DM36/10
DM36/10
4 tap: -11dB/-12dB/-13dB/-14dB.
In to out insertion loss -5dB.
DM36/13
4 tap: -13dB/-14dB/-15dB/-16dB.
In to out insertion loss -4dB.
DM36/16
4 tap: -16.5dB/-17dB/-17.5dB/-18.5dB.
In to out insertion loss -3dB.
DM36/19
4 tap: -18.5dB/-19dB/-19.5dB/-20.5dB.
In to out insertion loss -2dB.
DM37
-12.5dB/-13.5dB/-14dB/-14.5dB/-15.5dB/-16.5dB.
In to out insertion loss -5dB.
SATELLITE DIRECTIONAL COUPLERS
Taps
Tap Value
In-out loss @1750MHz
AITP10
1 tap
-10dB
-1.6dB
AITP16
1 tap
-16dB
-1.2dB
AITP22
1 tap
-22dB
-0.8dB
5 2,500MHz. High isolation directional couplers. Power pass In
to Out.
Catalogue 106
79
Diplexers, Filters & Passives
DE
DE1-10
FAS1-6
Taps
Tap Value
In-out loss @950MHz
FAS1-6
1 tap
-6dB
-3.5dB
FAS1-8
1 tap
-8dB
-3.5dB
FAS1-12
1 tap
-12dB
-3.5dB
FAS1-15
1 tap
-15dB
-3.5dB
FAS1-20
1 tap
-20dB
-1.0dB
FAS2-10
2 taps
-10dB
-3.5dB
FAS2-12
2 taps
-12dB
-3.5dB
FAS2-15
2 taps
-15dB
-3.0dB
FAS2-20
2 taps
-20dB
-3.0dB
FAS4-15
4 taps
-15dB
-4.5dB
FAS4-20
4 taps
-20dB
-4.5dB
FAS4-25
4 taps
-25dB
-4.0dB
5–2,500MHz F connector taps. @ 1,750MHz outlet isolation
≥18dB, Return Loss ≥14dB. Power pass in to out.
Taps
Tap Value
In-out loss @1750MHz
DE1-10
1 tap
-10dB
-1.6dB
DE1-14
1 tap
-14dB
-1.2dB
DE1-18
1 tap
-18dB
-0.9dB
DE1-22
1 tap
-22dB
-0.8dB
DE2-10
2 taps
-10dB
-2.5dB
DE2-14
2 taps
-14dB
-1.8dB
DE2-18
2 taps
-18dB
-1.5dB
DE2-22
2 taps
-22dB
-1.5dB
DE4-12
4 taps
-12dB
-5.1dB
DE4-14
4 taps
-14dB
-3.0dB
DE4-18
4 taps
-18dB
-1.5dB
DE4-22
4 taps
-22dB
-1.2dB
DE6-16
6 taps
-16dB
-5.5dB
DE6-20
6 taps
-20dB
-4.0dB
DE6-25
6 taps
-25dB
-2.0dB
DE8-16
8 taps
-16dB
-5.5dB
DE8-20
8 taps
-20dB
-4.5dB
DE8-25
8 taps
-25dB
-2.0dB
5-2,500MHz F connector Sat and Terrestrial taps. High Tap
Isolation and Return Loss. Power pass in to out.
DIPLEXERS & MULTIPLEXERS
BAND MIXERS OR SEPARATORS
MX201
Fracarro VHF/UHF Diplexer, F type with power
pass on VHF port. Insertion loss. VHF: ≤0.2dB,
UHF: ≤-0.2dB.
MX206
Fracarro B1+FM / B3 / UHF Triplexer, F type with
power pass on UHF port. Insertion loss. B1+FM: ≤
0.5dB, B3: ≤ 0.5dB, UHF: ≤1dB.
MX208
Fracarro VHF/UHF Diplexer, F type. With
optional Power pass on either input.
VHF : ≤-0.5dB, UHF: ≤-1dB.
Fracarro VHF/B4/B5 Diplexer, F type. B4 input
CH28-41, B5 input CH45-69. Insertion loss.
MX210/41-45
VHF: ≤-0.5dB, UHF: ≤-1dB. Other channels
available to your order.
80
Catalogue 106
JSVU3
Outdoor combiner with F connectors. Compatible
with Analogue and Digital TV signals. Input 1 VHF
and S bands (40–446MHz). Input 2 UHF (470–
862MHz). Insertion loss <1dB, return loss 10dB.
Diplexers, Filters & Passives
Quality Screw Clamp Multiplexers
ESVU
VHF/UHF diplexer, Power pass on UHF input.
ESVU2
VHF/UHF diplexer, Power pass on VHF input.
ES345/32
Au ch.20–28 UHF Low, Au ch.33–75 UHF High and
B3, 3 input mixer, Power pass UHF High, Trap B1
and 2.
ES345/39
Au ch.20-35 UHF Low, Au ch.41–75 UHF High and
B3, 3 input mixer, Power pass both UHF, Trap B1
and 2.
ES345/43
Au ch.20–43 UHF Low, Au ch.45–75 UHF High and
B3, 3 input mixer, Power pass B3 to UHF High, Trap
B1 and 2.
ESL3U
UHF, B3 and B’s 1 and 2, 3 input mixer. Band 3
-3dB at Au ch. 5A. Power pass UHF.
ESV45
Au ch.20–36 UHF Low, Au ch.40–75 UHF High and
VHF, 3 input mixer. Power pass UHF High.
ESV45S
Au ch.20–32 UHF Low, Au ch.38–75 UHF High and
VHF, 3 input mixer. Power pass UHF High.
ESVUU
UHF, UHF and VHF, 3 input mixer. Power pass
1 UHF port. (-4dB UHF as UU mix is wide band!).
MVUFV
M1-4/5FV
MM207
VHF/UHF diplexer, F Type weatherproof.
VHF: ≤-.4dB, UHF: ≤-.8dB.
MM307
VHF/UHF/UHF diplexer, F Type weatherproof.
VHF: ≤-.5dB, UHF ≤-4.5dB.
Fully shielded metal housing. Plastic cover for weather proofing.
DPOUV
VHF/UHF Diplexer. Screw and saddle connections.
Optional Power pass on either input.
DPOUVF
VHF/UHF Diplexer. F Type connections. Optional
Power pass on either input.
Diplexer F Type, VHF: 0.6–350MHz, insertion loss
0.4dB. UHF: 350MHz–900MHz, insertion loss 0.5dB.
Power pass to VHF port. Diecast zamac housing.
MX51HLF
VHF High/Low F Type
diplexer.
MX61UVF
VHF/UHF F Type diplexer.
MXAOF
Ch.0 /2–69 F Type
diplexer. Improved filter
design and F connectors
in full shielded case.
Mix bands 1 to 4 with band 5. ≤1dB insertion loss.
Power pass on both inputs.
Useful in capital cities to mix local signals from modulators etc.
with off air signals. Diecast metal housing.
DPX3
Mix Channels 0–6 with 9–11. (181/195MHz
crossover freq.) 1dB through loss.
DPX4
Mix Channels 0–7 with 11 (188/215MHz crossover
freq.) 1dB through loss.
DPX6
Mix Channels 0 with 2–11 (53/63MHz crossover
freq.) 1.5dB through loss.
Catalogue 106
81
Diplexers, Filters & Passives
SET DIPLEXERS
ANTENNA SWITCH
SD300300
300ΩUHF/300ΩVHF out, 75Ω in.
SD30075
300ΩUHF/75ΩVHF out, 75Ω in.
SD7575
75ΩUHF/75ΩVHF out, 75Ω in.
2 way antenna switch, F connector. .5dB insertion
loss with >50dB isolation, RF and IF. Permits weak
and strong signals to coexist, with quality leads.
AISW2
ANTENNA STACKING COUPLERS
TMU/4
SATELLITE IF/TERRESTRIAL DIPLEXERS
PayTV
Approved
ved
Pa
PayTV
Approved
Ap
BS20
BS30
BS20
Mix or separate 950–2050MHz 1st I.F. and 40-860
MHz. Power pass to SAT port. Low cost high spec.
BS30
Mix or separate 1st I.F. and 40-860 MHz. Use a pair
to mix and then separate. Traditional high spec.
TMU/2
UHF Band 4 and 5, 2 way stacking coupler +3dB,
outdoor design, cover excluded.
TMU/4
UHF Band 4 and 5, 4 way stacking couplers +6dB.,
outdoor design, cover excluded.
Extra signal and narrower beamwidth are achieved by
stacking antennas with practically nil insertion loss! A clever
way to reduce multipath and sidelobes whilst optimising front
to back ratio. Equal lengths of antenna coax required when
stacking antennas.
TERMINATORS
AIDCBT
FC7014
TE75PAL
TE75SC
MM214
Mix or separate 950-2400MHz 1st I.F. and
5-862MHz. ≤-.1dB TV, ≤-.3dB SAT.
FC7014
F connector 75Ω terminator, 5–1,000MHz.
AIDCBT
F Connector 75Ω DC blocking terminator,
5–3000MHz.
MM-DV25
F connector 75Ω terminator for satellite.
TE75PAL
PAL Male terminator.
TE75SC
Screw and Clamp terminator.
Tech Tip:
End of line or last tap out must be terminated to 75Ω with a terminating
resistor to ensure stable system function.
82
Catalogue 106
Diplexers, Filters & Passives
ATTENUATORS
FIXED ATTENUATORS
VARIABLE ATTENUATORS
Fully shielded
Zamac Case.
AT7520F
FATT3
3dB fixed F type m-f 75Ω attenuator.
FATT6
6dB fixed F type m-f 75Ω attenuator.
FATT12
12dB fixed F type m-f 75Ω attenuator.
FATT24
24dB fixed F type m-f 75Ω attenuator.
20dB Variable attenuator, F type.
Range:
0 to -20dB in 4 turns
Impedance:
Constant 75Ω
Frequency range: 0–1,000MHz
PATT3
3dB fixed PAL type m-f 75Ω attenuator.
PATT6
6dB fixed PAL type m-f 75Ω attenuator.
PATT12
12dB fixed PAL type m-f 75Ω attenuator.
PATT24
24dB fixed PAL type m-f 75Ω attenuator.
Insertion loss:
<0.5dB
5-300MHz:
<0.15dB
300MHz-1GHz:
<0.45dB
Return loss:
≤16dB
AT7520
Flat frequency response past 860MHz. Solder
inside FH-1, behind outlet plates, etc. Don’t risk
the mismatch potentiometers cause when used
as variable attenuators.
500mA
FATT6PP
6dB fixed F type m-f 75Ω attenuator. Power pass.
FATT12PP
12dB fixed F type m-f 75Ω attenuator. Power pass.
FATT24PP
24dB fixed F type m-f 75Ω attenuator. Power Pass.
Fully shielded
case.
AT7520M
20dB Variable attenuator, PAL Male to F connector.
Range:
0 to -20dB in 4 turns
Impedance:
Constant 75Ω
Frequency range: 0–1,000MHz
BL12F
Insertion loss:
<0.5dB
5-300MHz:
<0.15dB
300MHz-1GHz:
<0.45dB
Return loss:
≤16dB
Band 1 attenuator, -15dB, F to F connection.
Catalogue 106
83
Diplexers, Filters & Passives
FILTERS & ISOLATORS
MULTI BAND PASS FILTER COMBINER
FL3BPMH
Weatherproof bandpass filter and combiner
with options of 1, 2, and / or 3 inputs. Rejects
MW and 27MHz radio -40dB, VHF low -12dB
(variable), FM radio -30dB (selectable), 148MHz
paging -30dB, UHF comms -40dB and GSM
-20dB and CDMA -30dB, TV <2dB loss.
FRACARRO BAND & CHANNEL PASS FILTERS
FB4
Weatherproof masthead B4 Pass filter. Typical
through loss -1dB.
FB5
Weatherproof masthead B5 Pass filter. Typical
through loss -1dB.
FS/AU28
84
Prealigned for max. rejection of Au Ch.28 to
enable reception of weak UHF. Adjustable ±3
channels. Allow 1 Ch. either side. Weatherproof.
Other channels available — made to order.
Catalogue 106
FU/A..
UHF Channel Pass, pre-aligned to Ch.29. Pass
band freq. can be altered ±3 channels with care.
Made to order for any UHF channel.
F5R/CH
Pass one band 3 channel @-≤1dB whilst trapping
specified adjacent channel. Made to order.
Diplexers, Filters & Passives
FM (88–108MHz) REJECTION FILTERS
NOTCH FILTERS
Eliminate FM radio interference. Amplifiers increase
harmonics with harmful 88–108MHz harmonics often falling
in TV band 3.
FS/FM
Fracarro Masthead Filter, >-40dB to -50dB. Screw
and saddle terminals.
SF4
Band 4, 2 x -20/30dB notches, user tunable.
SF5
Band 5, 2 x -20/30dB notches, user tunable. Power
pass SF5 only!
Two independent filters within each SF permit either 2
frequencies to be attenuated or twice the attenuation on
one frequency. Tuning is easiest with a noise generator and a
meter with a spectrum function.
Tech Tip:
SF4/SF5 can be used to stop local broadcasts not required from interfering
with UHF modulator channels, Analogue or Digital.
FILTER HOUSINGS
FP/FM
Fracarro FM Filter >-50dB to -55dB.
M-F PAL 9.5mmØ connectors.
For indoor use only.
FM50FV
FH1
Empty case with PAL Male and Female
connectors, 7mmØ trimmer hole. Build your own
filters etc.
FH2
Empty case with 3 x F Female connectors. Highly
screened suits use with higher power levels. Build
your own mixers.
>-50dB FM filter, 88–108MHz, F type connectors.
Catalogue 106
85
Diplexers, Filters & Passives
BRAID BREAKERS
BBPAL1
TFBB1
Braid Breaker with PAL type Male to Female
connectors, 5–1,000MHz.Reduce AM radio
resonance’s in longer coax runs. Most effective
near the end of a long cable run.
ISOLATORS
IS3kV
3Kv centre conductor and braid isolator. <1dB
insertion loss 5–1000 MHz. Blocks potentially
dangerous voltages that accumulate in MATV
and Cable TV systems. Can provide isolation to
non isolated TV outlet plates too.
AIDCB
F Connector DC block, 5–3000MHz.
Braid Breaker, reduces induction of nearby MW
broadcasts. ≤1dB loss.
FBLKDC
86
Catalogue 106
Block AC/DC Power path, ≤1dB 1750MHz.
5
Contents
Instruments
Test Instruments
Budget Instruments & Accessories
Unaohm Handheld Instruments
88–89
Satellite Meters & Satellite Finder
Unaohm Professional
90–93
TV Signal Finder
Unaohm Broadcast
94
99
99–100
Angle Finder
99
Labgear Digital & Analogue Television Analyser 95
Noise Generators
101
Labgear Digital Satellite Analyser
Instrument Batteries & Chargers
101
Maxpeak Handheld Instruments
Optical Power Meter & Light Source
96
97–98
Technical Information
102–104
100
Catalogue 106
87
Instruments
TEST INSTRUMENTS
UNAOHM HANDHELD INSTRUMENTS
T40A
DIGITAL PRECISION
Features:
• T40a and T40a PLUS Hand held spectrum analyzer with
COFDM DVBT digital measurements
• Measures digital and analogue TV and FM.
Level: 20-120dBμV Frequency: 45–860MHz
• Selectable for dBμV, dBm and dBmV
• Digital COFDM pre and post Viterbi BER, RS, MER and
CSI quality
• Analogue C/N, V/A hold MAX, MIN and FREEZE
• Automatic detection of digital and analogue signals
measuring DCP Power or “peak” detection
• QAM estimated BER
• Spectrum display with various span resolutions to 10MHz
• Histogram of up to 42 channels simultaneously for easy
equalization of channels
• Tilt indication of up to 42 channels
• Dual markers for dual, independent, level and
frequency deltas
• Data logging of up to 1500 single logs
• Programmable manually or via supplied computer
controlled software
• Instructional CD ROM supplied
PLUS OPTION:
• NIT(Network Identification Table) identifies Broadcaster
and content within the channel
• Adaptive Equalizer Response (AER) to measure SFN or
“digital echoes” to 67km
88
Catalogue 106
Instruments
S48 PLUS
DIGITAL PRECISION
DVBS/S2 HD
Features:
• S48 PLUS Hand held spectrum analyzer for
QPSK-DVBS/8PSK-DVBS2 digital measurements
• Measures digital and analogue satellite signals,
input level: 40-120dBμV, frequency: 920–2150MHz
• Selectable for dBμV, dBm, dBmV
• Digital QPSK/8PSK pre and post Viterbi BER, RS and
MER quality
• CFO(Centre Frequency Offset), LNB quality indicator
• Hold function: MIN, MAX, FREEZE
• Spectrum display with various span resolutions to 10MHz
• Histogram of up to 42 transponders simultaneously in both
polarities for easy equalization
• Tilt indication of up to 42 transponders for SMATV
• Dual markers for dual, independent, level and
frequency deltas
• Data logging of up to 1500 single transponders
• Programmable manually or via supplied computer
controlled software
• Instructional CD ROM supplied
• Can be pre programmed for either of the PayTV providers
or a customized “Australian” satellite plan
• Approved by most service providers
• NIT(Network Identification Table) identifies Satellite name,
orbital position and content within the transponder
• ASL(Auto Satellite Locator) allows detection of only the
satellite selected, eliminating incorrectly found satellites.
The only system that works for non DVB-VSAT!
/
Catalogue 106
89
Instruments
UNAOHM PROFESSIONAL
AP201
Professional field strength meter
terrestrial, cable, satellite,
digital, analogue.
Main Features
INSTANT SPECTRUM RESPONSE!
/
DIGITAL MEASUREMENTS INCLUDE:
CH-BER(PRE VITERBI),
PV-BER(POST VITERBI),
MER, RS-UNCORRECTED, NM, CSI,
SNR & EVM, CONSTELLATION DISPLAY
FOR VERSION CHOSEN
Frequency Range:
Continuous 45–2250 MHz
Spectrum Analyzer:
Real Time – 2 Markers
MPEG2:
MPEG2 decoder
DISEqC:
1.1; 1.2 (ROTOR); 2.0; SCR
Data-Logger:
5 plans containing 50 programs each
1500 Measures Capability
Monitor:
Colour LCD 5.7” 320x240, High Brightness
Battery:
Li-Ion, more than 4h Autonomy; 4h charge time
“CLC” Function:
Calculation of cable length from the measurement point to
the fault point (optional noise generator required)
“TP-Sat” Function:
Pre-stored satellite table to recall transponders directly
AER:
Adaptive Equalizer Response for echo & SFN analysis.
Available only for DVB-T & DVB-C, range to 67kms.
VERSION
STANDARD EQUIPMENT
AP201 T PLUS (DVB-T)
COFDM module for DVB-T digital measurement
MPEG2 module with NIT (Network Information Table)
DVB-S/DVB-S2 virtual measurements
DVB-C virtual measurements
Reinforced nylon bag
AP201 S PLUS (DVB-S)
QPSK/8PSK module for DVB-S/DVB-S2 digital measurements
MPEG2 module with NIT (Network Information Table)
DVB-T virtual measurements
DVB-C virtual measurements
Reinforced nylon bag
AP201 C PLUS (DVB-C)
QAM module for DVB-C digital measurements
MPEG2 module with NIT (Network Information Table)
DVB-S virtual measurements
DVB-T virtual measurements
Reinforced nylon bag
Options
Spare Parts
ITEM
Options
DESCRIPTION
SB5-65
5 - 65 MHz Converter module (fitting at
factory only)
NG96F
Internal Noise Generator
FP2E
Battery charger for car lighter
Ask about our Fibre Optic Adaptor Kit!
90
Catalogue 106
ITEM
DESCRIPTION
BS14.4Li
Li-ion battery pack
BCH16/3,8
Battery charger
C-1001
Reinforced nylon bag
Instruments
AP01
Professional field strength meter
terrestrial, cable, satellite,
digital, analogue.
Main Features
INSTANT SPECTRUM RESPONSE!
/
DIGITAL MEASUREMENTS INCLUDE:
CH-BER(PRE VITERBI),
PV-BER(POST VITERBI)
MER, RS-UNCORRECTED, NM, CSI,
SNR & EVM,
CONSTELLATION DISPLAY DVB-T/S/S2
Frequency Range:
Continuous 45–2250 MHz
Spectrum Analyzer:
Real Time – 2 Markers
MPEG2:
MPEG2 decoder
DISEqC:
1.1; 1.2 (ROTOR); 2.0; SCR
Data-Logger:
5 plans containing 50 programs each
1500 Measures Capability
Monitor:
Colour LCD 5.7” 320x240, High Brightness
Battery:
Li-Ion, more than 4h Autonomy; 4h charge time
“CLC” Function:
Calculation of cable length from the measurement point to
the fault point
“TP-Sat” Function:
Pre-stored satellite table to recall transponders directly
AER:
Adaptive Equalizer Response for echo & SFN analysis.
Available only for DVB-T & DVB-C, range to 67kms.
VERSION
STANDARD EQUIPMENT
AP01-T/S (DVB-T/DVB-S)
COFDM module for DVB-T digital measurements
QPSK/8PSK module for DVB-S/DVB-S2 digital measurements
MPEG2 module with NIT (Network Information Table)
DVB-C virtual measurements
Reinforced nylon bag
AP01-C/S (DVB-C/DVB-S)
QAM module for DVB-C digital measurements
QPSK/8PSK module for DVB-S/DVB-S2 digital measurements
MPEG2 module with NIT (Network Information Table)
DVB-T virtual measurements
Reinforced nylon bag
AP01-T/C (DVB-T/DVB-C)
QAM module for DVB-C digital measurements
COFDM module for DVB-T digital measurements
MPEG4 + MPEG2 module with NIT (Network Information Table)
DVB-S virtual measurements
Reinforced nylon bag
Spare Parts
Options
ITEM
DESCRIPTION
ITEM
DESCRIPTION
MPEG4-01
MPEG4 + MPEG2 decoder module
BS14.4Li
Li-ion battery pack
SB5-65
5 - 65 MHz Converter module (fitting at
factory only)
C-01A
Reinforced nylon bag
NG96G
Internal Noise Generator
FP2E
Battery charger for car lighter
Ask about our Fibre Optic Adaptor Kit!
Catalogue 106
91
Instruments
AP301HD
Professional field strength meter
terrestrial, cable, satellite,
digital, analogue.
Main Features
INSTANT SPECTRUM RESPONSE!
/
DIGITAL MEASUREMENTS INCLUDE:
CH-BER(PRE VITERBI),
PV-BER(POST VITERBI),
MER, RS-UNCORRECTED, NM, CSI,
SNR & EVM,
CONSTELLATION DISPLAY DVB-T/S/S2
Frequency Range:
Continuous 45–2250 MHz
Spectrum Analyzer:
Real Time – 2 Markers
MPEG4:
MPEG4 + MPEG2 decoder
DISEqC:
1.1; 1.2 (ROTOR); 2.0; SCR
Data-Logger:
5 plans containing 50 programs each
1500 Measures Capability
Monitor:
Colour LCD 5.7” 320x240, High Brightness
Battery:
Li-Ion, more than 4h Autonomy; 4h charge time
Mains Power Supply: External Power Supply
“CLC” Function:
Calculation of cable length from the measurement point to
the fault point (optional noise generator required)
“TP-Sat” Function:
Pre-stored satellite table to recall transponders directly
AER:
Adaptive Equalizer Response for echo & SFN analysis.
Available only for DVB-T & DVB-C, range to 67kms.
VERSION
STANDARD EQUIPMENT
AP301-HD T/S
(DVB-T/DVB-S/DVB-S2)
COFDM module for DVB-T digital measurements
QPSK/8PSK module for DVB-S/DVB-S2 digital measurements
MPEG4 + MPEG2 module with NIT (Network Information Table)
DVB-C virtual measurements
Reinforced nylon bag (rucksack model)
AP301-HD C/S
(DVB-C/DVB-S/DVB-S2)
QAM module for DVB-C digital measurements
QPSK/8PSK module for DVB-S/DVB-S2 digital measurements
MPEG4 + MPEG2 module with NIT (Network Information Table)
DVB-T virtual measurements
Reinforced nylon bag (rucksack model)
AP01-HD T/C
(DVB-T/DVB-C)
QAM module for DVB-C digital measurements
COFDM module for DVB-T digital measurements
MPEG4 + MPEG2 module with NIT (Network Information Table)
DVB-S virtual measurements
Reinforced nylon bag (rucksack model)
Options
Spare Parts
ITEM
DESCRIPTION
SB5-65
5–65 MHz Converter module (fitting at
factory only)
NG96G
Internal Noise Generator
FP2E
Battery charger for car lighter
ITEM
DESCRIPTION
BS14.4Li
Li-ion battery pack
BCH16/3,8
Battery charger
C-313
Reinforced nylon bag (rucksack model)
Ask about our Fibre Optic Adaptor Kit!
Also Available AP 301–MPEG2 Decoding only
92
Catalogue 106
Instruments
AP401HD
DIRECT
DIRE
CT FIBRE INPUT
Professional field strength meter
terrestrial, cable, satellite,
digital, analogue.
Main Features
INSTANT SPECTRUM RESPONSE!
/
DIGITAL MEASUREMENTS INCLUDE:
CH-BER(PRE VITERBI),
PV-BER(POST VITERBI)
MER, RS-UNCORRECTED, NM, CSI,
SNR & EVM,
CONSTELLATION DISPLAY DVB-T/S/S2
Frequency Range:
Continuous 45–2150 MHz
Spectrum Analyzer:
Real Time – 2 Markers
MPEG4:
MPEG4 + MPEG2 decoder with NiT
DISEqC:
1.1; 1.2 (ROTOR); 2.0; SCR
Data-Logger:
1700 Measures Capability
Monitor:
Colour LCD 5.7” 320x240, High Brightness
Battery:
Li-Ion, approx. 4h Autonomy; 4h charge time
Tuner:
Terrestrial analogue – Satellite analogue
“CLC” Function:
Calculation of cable length from the measurement point to
the fault point
“TP-Sat” Function:
Pre-stored satellite table to recall transponders directly
AER:
Adaptive Equalizer Response for echo & SFN analysis.
Available only for DVB-T & DVB-C, range to 67kms.
Options
ITEM
Spare Parts
DESCRIPTION
ITEM
DESCRIPTION
COFDM-T2
COFDM-T2 board digital measures DVB-T2
BT091/92
Li-ion battery pack
MPEG4-01
Decoder Module MPEG4 / MPEG2 with NIT
C-01B
Reinforced nylon bag
SB 5–65
5–65MHz converter module
BCH 16/3,8
External power supply
NG96
Internal Noise Generator
FP2
Battery charger for car lighter
Catalogue 106
93
Instruments
UNAOHM BROADCAST
EP4000HD
Features include:
Professional field strength meter
terrestrial, cable, satellite, Wi-Fi,
digital, analogue.
Wi-Fi Input
•
Optic Fibre
Main Features
INSTANT SPECTRUM RESPONSE!
/
DIGITAL MEASUREMENTS INCLUDE:
CH-BER(PRE VITERBI),
PV-BER(POST VITERBI)
MER, RS-UNCORRECTED, NM, CSI,
SNR & EVM
Frequency Range:
Continuous 5–2250 MHz / 2000÷ 3000 MHz Wi-Fi
Spectrum Analyzer:
Real Time – 2 Markers
MPEG4:
MPEG4 + MPEG2 decoder with NiT
DISEqC:
1.1; 1.2 (ROTOR); 2.0; SCR
Data-Logger:
1700 Measures Capability
Monitor:
Colour LCD 5.7” 320x240, High Brightness
Battery:
Li-Ion, approx. 4h Autonomy; 4h charge time
Tuner:
Terrestrial analogue – Satellite analogue
“CLC” Function:
Calculation of cable length from the measurement point to
the fault point
“TP-Sat” Function:
Pre-stored satellite table to recall transponders directly
AER:
Adaptive Equalizer Response for echo & SFN analysis.
Available only for DVB-T & DVB-C, range to 67kms.
Options
Versions
ITEM
DESCRIPTION
As an alternative to standard reinforced-nylon
“Elite”
Corduroy Bag bag (to be specifically requested upon order)
QPSK/8PSK module for DVB-S/DVB-S2 digital
8PSK
measurements
COFDM module for DVB-T digital
COFDM
measurements
QAM
QAM module for DVB-C digital measurements
CONST 04
Constellation module for DVB-T, DVB-C,
DVB-S, DVB-S2
MPEG4-4000
MPEG4 + MPEG2 decoder module
CI4000
Common Interface module
NG96G
Internal Noise Generator
FP2E
Battery charger for car lighter
Spare Parts
ITEM
DESCRIPTION
BT091
Li-ion battery pack
C400
Reinforced nylon bag
C400-E
Elite corduroy bag
94
•
Catalogue 106
EP4000 BASIC
Li-Ion battery
Reinforced nylon bag
EP4000 CABLE HD
QAM module for DVB-C digital measurements
MPEG 4 + MPEG2 module with NIT (Network Information Table)
Constellation module
Reinforced nylon bag
EP4000 T-S HD
COFDM module for DVB-T digital measurements
QPSK/8PSK module for DVB-S/DVB-S2 digital measurements
MPEG4 + MPEG2 module with NIT (Network Information Table)
Constellation module
Reinforced nylon bag
EP4000 T-S HD C.I.
COFDM module for DVB-T digital measurements
QPSK/8PSK module for DVB-S/DVB-S2 digital measurements
MPEG4 + MPEG2 module with NIT (Network Information Table)
Constellation module
Common-Interface module
Reinforced nylon bag
Instruments
LABGEAR DIGITAL & ANALOGUE TELEVISION ANALYSER
Optimise test and measurement of complete Digital DVB-T and
Analogue television reception systems. Useful in the field or a laboratory,
from antenna alignment through MATV systems to broadcast.
DAT102
DAT102 PROVIDES THE FOLLOWING MEASUREMENTS:
• Modulation Error Ratio (MER) total quality quantification.
• Bit Error Ratio (BER) before Viterbi corrector.
• Bit Error Ratio (BER) after Viterbi corrector.
• Damaged packet count, after Reed-Solomon corrector.
• Constellation diagram, a powerful signal evaluation tool.
• Lock signal sync. status indicates service found.
• Digital channel Signal Level in Channel Power.
• Analog channel Video and Audio Carrier Levels.
• Vision to Audio and Carrier to Noise ratios.
• Blind Scan Function for uknown translators or MATV.
• Li-Ion battery 3 hours autonomy.
Main Menu
Detailed Signal Level
Full Screen Display
Expanded Spectrum
MER BER +
Constellation
DAT102 tools screen views include:
Catalogue 106
95
Instruments
LABGEAR DIGITAL SATELLITE ANALYSER
DAS202
Optimise adjustment and testing of complete Digital DVB-S2 Satellite
television reception systems. Useful in the field or a laboratory, from dish
pointing through SMATV systems to broadcast.
DAS202 PROVIDES THE FOLLOWING MEASUREMENTS:
• Modulation Error Ratio (MER) total quality quantification.
• Bit Error Ratio (BER) before & after Viterbi corrector.
• Bit Error Ratio (BER) before & after LDPC decoder.
• Constellation diagrams for QPSK and 8PSK.
• Lock signal sync. status indicates service found.
• Transponder Signal Level in Digital Channel Power.
• Frequency display of both Transponder Frequency (TF) and
Intermediate Frequency (IF), simultaneously.
• LNB Local Oscillator (LO) frequency error in MHz.
• Unique Magnetic Compass identifies actual satellite location.
/
• MER or C/N selectable.
Unique Satellite Locator
Service Selected
Spectrum Display In Real Time
Alignment Level & Quality
MER BER +
Constellation QPSK & 8PSK
DAS202 tools screen views include:
Network Information Status
96
Catalogue 106
Instruments
MAXPEAK HANDHELD INSTRUMENTS
TAM for DVB-T Digital TV
REAL DIGITAL MEASUREMENTS
Features:
• TAM is easily operated by the unique touch wheel and intuitive interface
• Unnecessary complex menus are replaced with simple to read, real time measurements
• TAM is programmed via the Maxpeak website by simply selecting the transmitters in your area
• Blind scan function searches for signals within a distribution system, allowing for fast measurements
• Measurements include DCP, pre and post Viterbi BER, MER and CSI quality
• Includes inbuilt rechargeable Ni-MH battery with 4h run time
• Signal range: 30-100dBμV displayed in either dBμV or dBm
• Comfy hand held shape with soft protective cover
• Car charger included!
Catalogue 106
97
Instruments
SAM-LITE
SAM-PLUS
Pre-programmed
for V.A.S.T
INSTANT SATELLITE LOCATOR
INSTANT SATELLITE LOCATOR
MEASUREMENTS INCLUDE:
DCP, PRE AND POST VITERBI
BER & MER
/
• QPSK DVBS / 8PSK DVBS-2 (HD)
• QPSK DVBS
• Simple and scientific measure modes selectable.
• Simple readings include satellite found, signal
level (DCP) and signal quality.
• Perfect for the Professional who wants accurate
measurements and to work FAST!
• Perfect for the beginner or low level users!
FEATURES:
Features:
• SAM series fast satellite locators that measure true digital
measurements
• Simply select the required satellite from the menu, ensures
only the service required is found
• SAM PLUS is programmed via the Maxpeak website by
selecting satellite or services required
• SAM series fast satellite locators that measure true digital
measurements
• Simply select the required satellite from the menu, ensures
only the service required is found
• SAM LITE is programmed via the Maxpeak website by
selecting satellite or services required
• No need to know complicated satellite parameters
• No need to know complicated satellite parameters
• Can be custom programmed via USB
• Can be custom programmed via USB
• All measurements displayed on the one screen
• All measurements displayed on the one screen
• Blind scan function to lock unknown services.
• Includes inbuilt rechargeable Ni-MH battery with 4h run
time
• Signal level range (DCP): 30–100dBμV displayed in either
dBμV or dBm
• Includes inbuilt rechargeable Ni-MH battery with 4h run
time
• Signal level range (DCP): 30–100dBμV displayed in either
dBμV or dBm
• Comfy hand held shape with soft protective cover
• Comfy hand held shape with soft protective cover
• LNB output voltage and DiSEqC / 22KHz tone burst
• LNB output voltage and DiSEqC / 22KHz tone burst
• Maximum “peak” detections displayed for precise
alignment
• Maximum “peak” detections displayed for precise
alignment
• Car charger included!
98
Catalogue 106
• Car charger included!
Instruments
BUDGET INSTRUMENTS & ACCESSORIES
SQ708
SQ701
ignal
True S ty
a
u
Q li ents!
urem
a
Me s
LABGEAR SQ701 DIGITAL SATELLITE QUALITY METER
• Aurora and VAST satellite services pre-programmed
This has to be the easiest satellite meter to use ever!
• Audible tone for eyes off alignment
• Signal quality and strength indicators
LABGEAR SQ708 DIGITAL SATELLITE QUALITY METER
• 8 most popular satellite services pre-programmed
• Each service programmed ready for 2 common LNBs
• Powered by either battery or set top box
• Instrument will only “lock” on the service selected
• Each programmed service has the choice of 4
available LNBs
• Audible tone for eyes off alignment
Satellite Finder
• Signal strength and signal quality indicators
• Can be powered via a set top box or by supplied
Li-Ion battery
• Handy wrist strap allows for hands free operation.
SF96C
• Compass attached accurately pinpoints direction
• Electronic Buzzer for audible tone
• Backlight enables use in low light
• Gain adjustable for accurate readings
• Horizontal / Vertical and 22KHz LED indicators
• Measures 950 – 2250MHz
AITVF
• Line Powered, no batteries to replace
TV SIGNAL FINDER FOR
OR CARAVANS
CARAVA
AND MOTOR HOMES
tenn in a few seconds
• Align your television antenna
• Simple and easy to use.
Angle Finder
• LED’s clearly indicate signal levels in dBμV steps of 10dB
• Compact and convenient shape that is easy to hold
• Internal battery, receiver or external power options
• Measures 5–862MHz
• Can be left connected for continuing signal indication
INC01
Locate your satellite by inclination angle. Each
satellite slot has a different elevation. Once
known you can’t miss! Magnetic base helps
Angle Finder stay on your feed arm.
Catalogue 106
99
Instruments
TV SIGNAL METER
that
A reliable meter
operly,
pr
l
leve
masures si gnal
50! +G ST!
now less than $1
TC870C
• Comfy hand held shape
• Measurement range 46-870 MHz
• TV and FM demodulation via loud speaker
• Channel plans include Australia, New Zealand and Australian
CATV providers
• Measures in dBμV, dBm, dBmV
• Level accuracy +/- 1.5dB, range 30–115dBμV
• Direct entry of frequency and FM demodulation permits FM
antenna alignments
• CATV Trunk-line voltage and C/N measurement
• Rechargeable internal Ni-MH battery with low level warning
• Includes a soft field bag with belt clip
OPTICAL POWER METER & LIGHT SOURCE
Robust handheld Optical Power meter and Light Source. Essential for checking power levels in Fibre Optic equipment.
Attractive pricing puts Fibre measurements within the reach of
most technicians.
OPM6010
Function
Optical Power Meter
Wavelengths:
850, 980, 1310 or 1550nm
Sensitivity / Output Power:
2–60 ~ dBm +10 dB
Uncertainty / Stability @ 20°C:
+ or - 5%
Optical interface:
FC adaptor
Detector / Emitter type:
InGaAs
Power supply:
9VDC rechargeable batt.
Auto OFF time:
10 minutes
Storage temperature:
-25 ~ +70 °C
Battery operating time:
28 hours
Weight:
250g
Dimensions:
150x76x26mm
OLS7315
100
Catalogue 106
Function
Optical Light Source
Wavelengths:
1310nm
Sensitivity / Output Power:
-6.5dBm +/- 0.5 dB
Uncertainty / Stability @ 20°C:
+ or - 0.05dB in 15 minutes
+ or - 0.10dB in 8 hours
Optical interface:
SC/APC adaptor
Detector / Emitter type:
Fabry-Perot LD
Power supply:
9VDC rechargeable batt.
Auto OFF time:
not applicable
Battery operating time:
8 hours
Weight:
160g
Dimensions:
150x74x25mm
Instruments
NOISE GENERATORS
NG500
NG754X
Free standing with integrated attenuator and selectable 1KHz
AM Modulation. Useful for checking Frequency Response,
Return Loss (with P257 75Ω bridge), filter alignment etc. Internal
battery simplifies sweeping entire TV systems with 1KHz square
wave modulation to help identify signal.
Frequency Range:
45 – 2,000MHz
Output Level:
Equal to 77dBμV (-30dBm) on a
1MHz measurement bandwidth.
Attenuator:
0–30dB in 2dB steps.
Attenuator Accuracy:
±.5dB 45 to 1,000MHz ±1.5dB 1,000
to 2,000MHz.
Selectable AM Mod.:
1KHz ± 5% square wave
Attenuator Precision:
±1dB @ 0dB
Stability
± 2dB to ± 20°C
Output Impedance
75Ω
Connector:
BNC
Power:
12V DC 800mAh internal NiCad
included, 18–24V DC via External
supply / charger included
Field Case:
Included
5–2300MHz Noise Generator — 75Ω High Output.
Now you can sweep anything from a connector
to an entire TV system! 80dBμV@1MHz rbw ±2dB
over entire range. Includes case, mains power
supply and space for optional battery pack,
12–16V DC @ 240mA.
NG500
INSTRUMENT BATTERIES & CHARGERS
BC75AC
BC75AC
Replacement Batteries
Replacement AC battery charger for Unaohm
S22, T40a, C30 and S48.
BC75DC
BC75DC
BP3
Battery pack for TAM, SAM series.
BP4
Battery pack for the TC870, TC870B, TC870C.
BP5
Replacement battery for handhelds S22, T40a,
C30 and S48.
BP6
Handheld external optional battery
BS1234
Unaohm battery, 12V 3.44Ah SLA
BS1272
Unaohm battery, 12V 7.2Ah SLA
BS14.4Li
Li-Ion battery for AP series
C20BAG
DC car charger for Unaohm S22, T40a, C30
and S48.
C20BAG
Protective bag for Unaohm S22, T40a, C30
and S48. Genuine Unaohm, keep the feeling!
Catalogue 106
101
Instruments
TECHNICAL INFORMATION
AUSTRALIAN TV CHANNEL DESIGN & LIMITS
Band
VHF
1
VHF
2
VHF
3
Band
UHF
4
Channel
0
1
2
3
4
5
5A
6
7
8
9
9A
10old
10new
11old
11new
12
Channel
28
29
30
31
32
33
34
35
Vision
46.25
57.25
64.25
86.25
95.25
102.25
138.25
175.25
182.25
189.25
196.25
203.25
209.25
210.25
216.25
217.25
224.75
Vision
527.25
534.25
541.25
548.25
555.25
562.25
569.25
576.25
1st Sound
51.75
62.75
69.75
91.75
100.75
107.75
143.75
180.75
187.75
194.75
201.75
208.75
214.75
215.75
221.75
222.75
229.75
1st Sound
532.75
539.75
546.75
553.75
560.75
567.75
574.75
581.75
Limits
45-52
56-63
63-70
85-92
94-101
101-108
137-144
174-181
181-188
188-195
195-202
202-209
208-215
209-216
215-222
216-223
223-230
Limits
526-533
533-540
540-547
547-554
554-561
561-568
568-575
575-582
Cent. Freq.
48.5
59.5
66.5
88.5
97.5
104.5
140.5
177.5
184.5
191.5
198.5
205.5
211.5
212.5
218.5
219.5
226.5
Cent. Freq
529.5
536.5
543.5
550.5
557.5
564.5
571.5
578.5
• New channel 10 and 11 services will be placed +1MHz.
• Digital services can be offset +125KHz from
centre channel.
• Stereo sub-carriers +242KHz from 1st Audio carrier.
• No new television services for channels 3, 4, 5, or 5A.
Band
UHF
5
Channel
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
Vision
583.25
590.25
597.25
604.25
611.25
618.25
625.25
632.25
639.25
646.25
653.25
660.25
667.25
674.25
681.25
688.25
695.25
702.25
709.25
716.25
723.25
730.25
737.25
744.25
751.25
758.25
765.25
772.25
779.25
786.25
793.25
800.25
807.25
814.25
1st Sound
588.75
595.75
602.75
609.75
616.75
623.75
630.75
637.75
644.75
651.75
658.75
665.75
672.75
679.75
686.75
693.75
700.75
707.75
714.75
721.75
728.75
735.75
742.75
749.75
756.75
763.75
770.75
777.75
784.75
791.75
798.75
805.75
812.75
819.75
Limits
582-589
589-596
596-603
603-610
610-617
617-624
624-631
631-638
638-645
645-652
652-659
659-666
666-673
673-680
680-687
687-694
694-701
701-708
708-715
715-722
722-729
729-736
736-743
743-750
750-757
757-764
764-771
771-778
778-785
785-792
792.799
799-806
806-813
813-820
Cent. Freq
585.5
592.5
599.5
606.5
613.5
620.5
627.5
634.5
641.5
648.5
655.5
662.5
669.5
676.5
683.5
690.5
697.5
704.5
711.5
718.5
725.5
732.5
739.5
746.5
753.5
760.5
767.5
774.5
781.5
788.5
795.5
802.5
809.5
816.5
AMPLIFIER MAX. OUT. & RULES OF THUMB
As more channels are amplified, an amplifier’s maximum output level must be reduced to stop intermodulation products reducing picture quality.
Broadband amplifiers are usually rated for maximum output with 2 equal channels of say 108dBμV. This is the figure to reduce according to the
number of TV channels being amplified. Count 88–108MHz band 2 F.M. radio as 1 channel unless it is 10dB or more below the TV levels.
No. of channels
1
2
3
4
5
6
No. of channels
2
3
4
5
6
7
8
9
10
Reduction indB
0
3
4.5
6
7
7.5
Reduction indB
0
2.5
3.5
4.5
5
5.5
6
6.5
7
Example: Using an amplifier with a manufacturers maximum
output rating of 108dBμV when amplifying 8 equal channels, the
second amplifier should have it’s maximum output level calculated
108 -(6+3) = 99dBμV
The noise an amplifier generates adds to the total noise in a system, so
the maximum output level must be further reduced according to the
number of amplifiers being used.
RETURN LOSS
Antenna systems work best when the impedance is the same at all points in the system. Impedance variations introduce signal reflections that
reduce the efficiency of the distribution system. This reflected signal meets signal travelling in the opposite direction, causing standing waves.
Measured standing waves are known as Return Loss. It is the same as Voltage Standing Wave Ratio, abbreviated to V.S.W.R., or S.W.R.
Poor Return Loss reduces signal quality and can be caused by any component in the distribution system.
An ideal V.S.W.R. is 1:1 where no power is reflected, but this is seldom attained. In practice 1.5:1 is more common, with 2:1 an acceptable limit.
Return Loss or VSWR is an important factor in delivering Digital TV with the least possible reduction in Signal Quality between the Antenna and the
Wall Socket.
102
Catalogue 106
Instruments
RETURN LOSS = VSWR TABLE
dB RL
VSWR
2
8.7
6
3.0
10
1.9
14
1.5
18
1.3
22
1.2
TYPICAL COAXIAL CABLE LOSSES DB PER 100M
26
30
34
38
46
1.1 1.07 1.04 1.03 1.01
SUGGESTED ANALOGUE VISION SIGNAL LEVELS
Antenna delivers:
Poor picture, must be masthead amplified.
Can be 100% with low noise masthead amplified.
Not quite enough for 1 set, distribution amplified.
OK.
O.K. for 2-4 sets if splitter and cable quality good.
Arriving at the set:
Recommended minimum, allows for rain fade.
Recommended for best picture quality.
Recommended maximum signal level.
Too much signal, tuner overload possible.
@20°C ±1.8%/10°C
MHz
55
211
350
550
870
1000
1750
RG59
6.18
11.79
15.22
19.36
24.75
26.54
35.81
RG6
4.94
9.43
12.2
15.62
19.99
21.46
28.66
RG11
3.12
5.95
7.74
9.88
12.8
13.88
19.51
35dBμV
45dBμV
55dBμV
65dBμV
55dBμV
65dBμV
75dBμV
85dBμV
TRANSMITTED VISION TO SOUND RATIOS
1st sound (L and R) -13dB from vision , 2nd (2xR) -20dB.
MEASURING DIGITAL TELEVISION SIGNALS
Buying an instrument for Digital has to be more than a hit or miss affair. Yet, based on some of the information available, it can be little more than a
lucky dip.
What is it you want to measure?
Digital Channel Power, Bit Error Ratio, Modulation Error Ratio or Reflections?
Judging Digital TV Signal Quality by viewing pictures can deceive. With perfect pictures, total loss of service can be close at hand! Forward Error
Correction works continuously in digital transmission systems to keep received picture quality perfect. FEC makes field Signal Quality measurements
not just possible, but more important than signal level measurements!
Bit Error Ratios are perhaps the most useful quality measures of a Digital data stream, complicated by the need for 3 additional measurements
before a full Signal Quality position is clearly understood (MER, RU & CSI). The narrow measurement range between high and low signal qualities
makes it a demanding measurement of Installer Field Signal Meters. Digital Channel Power is the measure of digital signal level with no indication
of Signal Quality. DCP is difficult to measure properly on an Analogue Signal Meter.
Reflections actually help Digital TV, but there are limits to what receivers can handle. By seeing the reflections on an Adaptive Equalizer Response
(AER) display, the antenna can be positioned to ensure reflections are not likely to degrade reception. Unaohm’s AER function is helpful in
obtaining the most stable Digital signal and is particularly helpful with Single Frequency Networks. AER displays echo values across time and
distance, showing strength and when signals are outside the Guard Band and most likely to contribute to picture instability.
Laceys.tv sells and supports a very broad range of TV Signal meters from some of the worlds best known manufacturers. Talk to us about your
Digital TV measurement needs.
AUSTRALIAN TELEVISION RE-STACK CHANNEL BLOCKS
174MHz
Channels:
6
Block A
7
8
9
526MHz
Channels:
28
34
30
40
35
36
41
42
46
47
48
12
568MHz
31
32
33
610MHz
37
38
43
44
49
50
Block D
652MHz
Channels:
11
Block C
610MHz
Channels:
10
Block B
29
568MHz
Channels:
230MHz
9A
39
652MHz
Block E
45
694MHz
51
It is proposed that digital TV broacast channels will be re-arranged in the channel groups above, shortly after switchover is completed.
As the national plan is complex and some details are yet to be finalized, the latest details of the plans can be found at http://www.acma.
gov.au/WEB/STANDARD.PC/pc=PC_312417.
Narrow bandwidth antennas for each block are identified by the colours above, and show on page 9, 12, 13, 15, 16 and 17.
Catalogue 106
103
Instruments
LEVEL CONVERSION TABLE AT 75 OHMS
dBμV
μV
dBm
pW
dBμV
mV
dBm
μW
25
17.8
-83.8
4.22
87
22.4
-21.8
6.68
27
22.4
-81.8
6.68
89
28.2
-19.8
10.6
29
28.2
-79.8
10.6
91
35.5
-17.8
16.8
31
35.5
-77.8
16.8
93
44.7
-15.8
26.6
33
44.7
-75.8
26.6
95
56.2
-13.8
42.2
35
56.2
-73.8
42.2
97
70.8
-11.8
66.8
37
70.8
-71.8
66.8
99
89.1
-9.8
106
39
89.1
-69.8
106
101
112
-7.8
168
41
112
-67.8
168
103
141
-5.8
266
43
141
-65.8
266
105
178
-3.8
422
45
178
-63.8
422
107
224
-1.8
668
47
224
-61.8
668
109
282
.2
1.06mW
49
282
-59.8
1.06nW
111
355
2.2
1.68
51
355
-57.8
1.68
113
447
4.2
2.66
53
447
-55.8
2.66
115
562
6.2
4.22
55
562
-53.8
4.22
117
708
8.2
6.68
57
708
-51.8
6.68
119
891
10.2
10.6
59
891
-49.8
10.6
121
1.12V 12.2
16.8
61
1.12mV
-47.8
16.8
123
1.41
14.2
26.6
63
1.41
-45.8
26.6
125
1.78
16.2
42.2
65
1.78
-43.8
42.2
127
2.24
18.2
66.8
67
2.24
-41.8
66.8
129
2.82
20.2
106
69
2.82
-39.8
106
131
3.55
22.2
168
71
3.55
-37.8
168
133
4.47
24.2
266
73
4.47
-35.8
266
135
5.62
26.2
422
75
5.62
-33.8
422
137
7.08
28.2
668
77
7.08
-31.8
668
139
8.91
30.2
1.06W
79
8.91
-29.8
1.06μW
141
11.2
32.2
1.68
81
11.2
-27.8
1.68
143
14.1
34.2
2.66
83
14.1
-25.8
2.66
145
17.8
36.2
4.22
85
17.8
-23.8
4.22
147
22.4
38.2
6.68
Digital or Analogue In House AV
Distribution Systems
It is practical to send the picture and sound from a PayTV receiver,
DVD player or recorder to all TVs in the house. There are several
ways to accomplish this, but careful thought must be given to
channel planning and system design if it is to allow any channel to
be viewed clearly on any TV at any time.
Most RF outputs are factory preset around channel 37 and are
menu adjustable across the entire ch 28 to 69 UHF TV range. To
permit a DVR to record off-air channels, a small amount of incoming
signal should be tapped off before the mixer to avoid creating a
feedback loop. Laceys.tv FA1-12 or CD-141 couplers will provide the
DVR with off air signal with a hardly noticeable insertion loss of less
than 1dB. An external modulator like Laceys.tv MD531 with Stereo
Audio and a broad channel plan may assist.
Laceys.tv pioneered the use of Digital Modulators in 2008. Today
we are delivering quality HD and SD Digital TV modulators, solutions
that get the best from your clients Digital TVs whether it is a single
door camera or many channels from various AV sources. The result is
superior digital pictures over ordinary analogue picture quality.
Mixing with a splitter or power divider in reverse effectively
superimposes any unwanted off air signals and noise etc. from the
DVD or PayTV box modulator, on to the signals you want in your
system. Laceys.tv have a range of band or frequency selective
mixing devices that offer high isolation, generally better than 30dB,
and insertion loss of less than 1dB, that can make the ideal mix. For
example, M1-4/5FV will mix signal from an off-air antenna up to
ch36 with ch40 upwards. If a number of set top boxes are required,
their RF outputs can be combined using an F type splitter in reverse
and the combined signal fed into a band selective mixer. Another
solution is the JH7RP45AU distribution amplifier which provides
selective inputs for all VHF, bands 4 and band 5. Grossly unbalanced
signal levels can be adjusted with attenuators.
Ideally, multiple set top boxes and off-air channels should be
combined with a single channel amplifier system like Lacey’s KF
series filters, although cost sometimes dictates a band selective
solution like those described above. With the typical 65-70dBμV
from a modulator and 70dBμV of off-air signal, it is possible to run a
modulated system to 4 points passively using an FA1-12 or CD-141
coupler and M1-4/5FV mixer, with the total loss in the 2 devices
<2dB. No amplifier is necessary!
ANTENNA
RF IN
COUPLER
FA1-12
PVR
MIXER
M1-4/5FV
RF OUT
AMPLIFIER
AI100
MULTI
TAP
FA8-MT
104
Catalogue 106
OUT TO
TV’S
6
Contents
Mounting
Brackets &
Cabinets
LED/LCD/Plasma Brackets
Swivel Brackets
106–107
Speaker Brackets
111
Meliconi Premium Television Brackets
112
Flat Mounting Brackets
108
Cabinets
Tilt Mounting Brackets
109
19” Wall Cabinets
113
Ceiling Mount Brackets
110
19” Floor Standing Cabinets
113
Pull Out Mounting Brackets
110
Open Wall Cabinets
114
Cabinet Shelves
114
Cabinet Accessories
114
Misc. Brackets
Projector Brackets
111
Catalogue 106
105
L
P
S
M
O
C
C
Mounting Brackets & Cabinets
LED/LCD/PLASMA
/
/
BRACKETS
LCD SWIVEL BRACKETS
LCD113
LCD bracket 1 point swivel arm tilts ±15°. For ~14”
to 24” panels. Up to 15kg panel weight. 75mm
and 100mm VESA mounting holes.
LCD112
LCD bracket 2 point swivel arm tilts ±15°. Supports
up to 15kg panel weight with 75mm and 100mm
VESA mounting holes.
LCD111
LCD bracket 3 point swivel arm tilts ±15°. Supports
up to 15kg panel weight with 75mm and 100mm
VESA mounting holes.
LCD501A
LCD bracket 1 point swivel arm tilts ±20°. For ~10”
to 30” panels. Up to 30kg panel weight. 200mm,
100mm, 75mm or 50mm VESA mounting holes.
LDA03-110
LCD bracket 1 point swivel arm with ±20°
tilt and ±10° pivot. Up to 15kg panel weight
for 13”–23” panels. 75mm and 100mm VESA
mounting holes.
LDA03-112
LCD bracket 2 point swivel arm with ±20°
tilt and ±10° pivot. Up to 15kg panel weight
for 13”–23” panels. 75mm and 100mm VESA
mounting holes.
LDA03-113
LCD bracket 3 point swivel arm with ±20°
tilt and ±10° pivot. Up to 15kg panel weight
for 13”–23” panels. 75mm and 100mm VESA
mounting holes.
LDA03-220
LCD bracket 1 point swivel arm with ±20° tilt
and ±10° pivot. Up to 20kg panel weight for
17”–37” panels. 75mm, 100mm and 200mm
VESA mounting holes.
106
Catalogue 106
Mounting Brackets & Cabinets
LDA03-222
LCD bracket 2 point swivel arm with ±20° tilt
and ±10° pivot. Up to 20kg panel weight for
17”–37” panels. 75mm, 100mm and 200mm
VESA mounting holes.
LCD201
LCD bracket super Low Profile for 13”–23”, only
18mm deep. 2 piece bracket, with lock screws.
Up to 30kg panel weight. 50mm, 75mm and
100mm VESA mounting holes. TV to wall 15mm.
LCDUCM
LCD under cabinet mount. Gliding arm swings
screen up and away when not in use. Swivels for
multiple viewing angles. Up to 8kg panel weight.
100mm, 75mm or 50mm VESA mounting holes. Tilt
o
o
range 100 , swivel range 250 .
LDA03-223
LCD201L
LCD bracket 3 point swivel arm with ±20° tilt
and ±10° pivot. Up to 20kg panel weight for
17”–37” panels. 75mm, 100mm and 200mm
VESA mounting holes.
LCD bracket super Low Profile, only 18mm deep.
2 piece bracket, with lock screws. Up to 35kg
panel weight. 50mm, 75mm, 100mm or 200mm
VESA mounting holes. TV to wall 18mm.
Catalogue 106
107
Mounting Brackets & Cabinets
LED/LCD/PLASMA FLAT MOUNTING BRACKETS
PLB17
PLB13L
LP10-46F
108
Plasma/LCD bracket for 23”–37” panels weighing
up to 75kg. 30mm Low Profile bracket depth.
Accommodates panel mountings up to
475mmW x 325mmH.
PLB13
Plasma/LCD bracket for 30”–63” panels weighing
up to 75kg. 30mm Low Profile bracket depth.
Accommodates panel mountings up to
780mmW x 470mmH.
Plasma LCD bracket for 30”–65” panels weighing
up to 75kg. 30mm Low Profile bracket depth.
Accommodates panel mountings up to
870mmW x 470mmH.
LP10-44F
LCD/LED fixed wall mount for 23”–42” panels
weighing up to 50kg. 26mm low profile bracket
depth. Accommodates panel mountings up to
410mmW x 420mmH.
LP10-46F
LCD/LED fixed wall mount for 37”–63” panels
weighing up to 50kg. 26mm low profile bracket
depth. Accommodates panel mountings up to
810mmW x 420mmH.
LCD/LED fixed wall mount for 32”–60” panels
weighing up to 50kg. 26mm low profile bracket
depth. Accommodates panel mountings up to
610mmW x 420mmH.
Catalogue 106
Mounting Brackets & Cabinets
LED/LCD/PLASMA TILT MOUNTING BRACKETS
PLB18
Plasma/LCD bracket for 23”–37” panels weighing
up to 75kg. Tilts to -15°. 80mm bracket depth.
Accommodates panel mountings up to
460mmW x 335mmH.
PLB5
Plasma/LCD bracket for 30”–63” panels weighing
up to 75kg. Tilts to ±15°. 72mm bracket depth.
Accommodates panel mounts up to 775mmW x
505mmH. Lockable against theft.
PLB43
LCD/LED low profile bracket for 37”–64”
panels weighing up to 75kg. Tilts to -10°. 46mm
mounting depth. Accommodates panel
mountings up to 810mmW x 410mmH.
PLB14
Plasma/LCD bracket for 30”–63” panels weighing
up to 75kg. Tilts to -15°. 80mm bracket depth.
Accommodates panel mountings up to
750mmW x 470mmH.
PLB42
LCD/LED low profile bracket for 23”–37” panels
weighing up to 75kg, ±10° tilt, 46mm mounting
depth. Accommodates panel mountings up to
410mmW x 234mmH.
LPA13-444
Plasma/LCD/LED full motion mounting brackets
for 23”–42” panels weighing up to 45kg.
Cantilever arm provides ±60° lateral rotation.
Extend from 12–51cm, tilts to ±15°, panel
mountings 426mmW x 464mmH.
Catalogue 106
109
Mounting Brackets & Cabinets
LCD/PLASMA CEILING MOUNT BRACKETS
PLBCE3D
Back to back 2 panel ceiling mount. Adjusts from
1050mm to 1620mm. Up to 80kg weight capacity,
includes cable concealment. PLB13, PLB13L,
PLB14, PLB17 or PLB18 required to use this product.
PLBCE3
LCD ceiling mount for a larger panel. Adjusts from
870mm to 1560mm. Up to 80kg weight capacity,
swivels 360°. Includes cable concealment. PLB13,
PLB13L, PLB14, PLB17 or PLB18 required to use
this product.
LCD504A
LCD ceiling mount for ~10” to 31” panel. Drop
adjusts from 500mm to 850mm. 190° horizontal
and 20° vertical tilt. Up to 30kg weight capacity.
Includes cable concealment. 200mm, 100mm,
75mm or 50mm VESA mounting holes.
LCDCE5
LCD ceiling bracket, 870-1560mm adjustment,
with cable concealment. Up to 30kg weight
capacity. 200mm, 100mm, 75mm or 50mm VESA
mounting holes.
LED/LCD/PLASMA PULL OUT MOUNTING BRACKETS
PLBWA3A
Pull out elbow bracket to suit PLB13/14/17/18.
Holds up to 75kg.
PLBWA6
Includes 2 x 650mm 4.4mm thick Wall Mounting Bars punched
for ~45, 52 and 60cm stud distances.
PLBWA7
110
LCD wall mount for 23”–37”. Up to 75kg panel
weight. 130mm to 300mm profile bracket depth.
Rotates +/-45° with +/-15° tilt. Accommodates
panel mountings up to 500mmW x 330mmH.
Catalogue 106
LCD-WA3
LCD wall mount for 30”–63”. Up to 75kg panel
weight. 130mm to 300mm profile bracket depth.
Rotates +/-45° with +/-15° tilt. Accommodates
panel mountings up to 800mmW x 480mmH.
Pull out elbow bracket for LCD/LED panels
17”–37”, max VESA 200x200mm.
Mounting Brackets & Cabinets
MISC. BRACKETS
PROJECTOR BRACKETS
LED024
Low profile LED/LCD TV mounting brackets to
suit 23”–37”. Easy mounting design with universal
mounting pattern.
Max Vesa: 400x400mm
TV-wall: 14.5mm
LED026
LED028
Max Weight: 50kg
Colour: Black
PRB1
Low profile black bracket to suit 32”–50”. Easy
mounting design with universal mounting pattern.
Max Vesa: 600x600mm
TV-wall: 14.5mm
Projector bracket with 80mm x 150mm ceiling
spacing tube. Suits up to 10kg projector weight.
(Optional 300mm ceiling spacing tube available)
Max Weight: 50kg
Colour: Black
Low profile black brackets to suit 32”–63”. Easy
mounting design with universal mounting pattern.
Max Vesa: 800x800mm
TV-wall: 14.5mm
Max Weight: 50kg
Colour: Black
LED048
Ultra slim LED TV mounting brackets to suit 42”–70”.
LED048
LED058
Max Vesa: 800x800mm
TV-wall: 24.5mm
PRB2
Max Weight: 50kg
Colour: Black
Projector bracket with adjustable tube. 430650mm with cable concealment. Suits up to 20kg
projector weight.
Ultra low profile LED TV mounting brackets to
suit 42”–70”.
Max Vesa: 800x800mm
TV-wall: 14.5mm
Max Weight: 50kg
Colour: Black
SPEAKER BRACKETS
A = 40mm
B = 67mm
C = 90mm
D = 45mm
E = 80mm
LPF344
Ultra slim black low profile bracket to suit 23”–37”.
LPF324
Mounting holes:
420mmW x 220mmH
TV-wall: 8mm
Max Weight: 45kg
Colour: Black
Ultra slim black low profile bracket to suit 32”–42”.
LPF344
Mounting holes:
420mmW x 410mmH
TV-wall: 8mm
BM-SXS
Black speaker brackets, 1 x pair. Wall hanging
boxed presentation pack.
BM-S50S
Silver speaker brackets, 1x pair. Clear wall
hanging boxed presentation pack.
Max Weight: 55kg
Colour: Black
Ultra slim black low profile bracket to suit 32”–63”.
LPF348
Mounting holes:
810mmW x 410mmH
TV-wall: 8mm
Max Weight: 65kg
Colour: Black
Catalogue 106
111
Mounting Brackets & Cabinets
MELICONI PREMIUM TELEVISION MOUNTING BRACKETS
A = 500mm
B = 300mm
C = 260mm
D = 75mm
E = 560mm
BM-MB
Black medium fixed TV wall bracket. Suits
televisions of approx. 51-63cm diag. screen size
and up to 30kg weight.
BM-MS
Silver medium fixed TV wall bracket. Suits
televisions of approx. 51-63cm diag. screen size
and up to 30kg weight.
A = 500mm
B = 300mm
C = 260mm
D = 75mm
E = 560mm
BM-MRB
A = 507mm
B = 324mm
C = 275mm
D = 75mm
E = 641mm
BM-R25S
Silver large rotating TV wall bracket. Suits
televisions of approximately 51-63cm diag. screen
size and up to 40kg weight.
Black medium rotating TV wall bracket. Suits
televisions of approximately 43-53cm diag. screen
size and up to 25kg weight.
A = 330mm
B = 250mm
C = 260mm
D = 75mm
E = 400mm
BM-SEB
Black small fixed TV wall bracket. Suits televisions
of approximately 35-48cm diag. screen size and
up to 25kg weight.
BM-SES
Silver small fixed TV wall bracket. Suits televisions of
approximately 35-48cm diag. screen size and up
to 25kg weight.
A = 300mm to 460mm
B = 75mm to 130mm
BM-VCRB Black adjustable DVD, Receiver or VCR etc.
mount. Fits below any of the above brackets.
BM-VCRS Silver adjustable DVD, Receiver or VCR etc.
mount. Fits below any of the above brackets.
112
Catalogue 106
Tech tip: TV wall brackets can also be used to mount DVD, set top box,
games console etc underneath your wall mounted plasma/LCD tv.
Mounting Brackets & Cabinets
CABINETS
19 INCH WALL CABINETS
Present your workmanship in handsome all steel Cabinets. Doors and Panels key lock to reduce unauthorized access. Larger
cabinets ship complete, knocked down. Doors fitted with clear tough laminated glass. Attractive pricing for fully featured
cabinets. Ready for up to 4 x 12cm exhaust fans. Range of Shelves, Blanking, Brush and Recess Panels and accessories stocked.
Superior 2 pack Powder Coat finish. Available in Black or computer beige.
CAB194506
6u wall cabinet, lockable. 600 x 450mm.
CAB194509
9u wall cabinet, lockable. 600 x 450mm.
CAB194512
12u wall cabinet, lockable. 600 x 450mm.
CAB194515
15u wall cabinet, lockable. 600 x 450mm.
19 INCH FLOOR STANDING CABINETS
CAB196020
20u floor standing cabinet, lockable. 600 x 600mm.
CAB196025
25u floor standing cabinet, lockable. 600mm deep.
CAB196030
30u floor standing cabinet, lockable. 600mm deep.
CAB196035
35u floor standing cabinet, lockable. 600mm deep.
CAB196042
42u floor standing cabinet, lockable. 600mm deep.
CAB196046
46u floor standing cabinet, lockable. 600mm deep.
CAB198042
42u floor standing cabinet, lockable. 800mm deep.
Cabinets available in black and computer beige.
Larger cabinets include:
2 x shelves, 2 x fans and 2 Cable Management racks.
CAB196025
CAB196042
Catalogue 106
113
Mounting Brackets & Cabinets
OPEN WALL CABINETS
CABINET SHELVES
CAB1945SH
CAB1960SH
CAB1960SS
CAB194U440SH
CAB193002W 2u open wall cabinet 300mm deep, white.
CAB193003W 3u open wall cabinet 300mm deep, white.
CAB193004W 4u open wall cabinet 300mm deep, white.
CAB193006W 6u open wall cabinet 300mm deep, white.
CAB19445SH
Cabinet wall shelf, 290mm deep x
490mm wide.
CAB1960SH
Floor cabinet fixed equipment shelf, 465mm
deep x 290mm wide.
CAB1960SS
Floor cabinet vented sliding shelf,
380mm deep x 445mm wide. <30kg
load, 3 stage sliders pull out fully for easy
equipment access.
CAB192U440SH
2u cantilever shelf,
445mm deep x 400mm wide.
CAB194U440SH
4u cantilever shelf,
445mm deep x 400mm wide.
CABINET ACCESSORIES
CAB19CMR1
Cable management rack.
CMCP13
Cable Management rail for 19” data/
distribution cabinets, 13 finger.
CAB19CAST
CAB19CFAN
CAB19BR1U
CAB19BR1U
Black brush panel.
CAB19CFAN
240w cooling fan.
CAB19CAST
Individual castors for floor standing cabinets.
PATCHCAT5E24 CAT5e 24 port data patch panel.
PATCHCAT624
CAT6 24 port data patch panel.
CAB19BP/..
CAB19BP05
½u blanking panel.
CAB19BP1U
1u blanking panel.
CAB19BP2U
2u blanking panel.
CAB19BP3U
3u blanking panel.
CAB18BP4U
4u blanking panel.
114
Catalogue 106
CAB19RP6U
CAB19RP2U
2u recessed panel.
CAB19RP4U
4u recessed panel.
CAB19RP6U
6u recessed panel.
7
Contents
MATV, SMATV
& CCTV
Fracarro K Series
Fracarro Professional Headends
125
Single Channel Amplifiers
116
Fracarro Headline TS — QAM or ASI
125
Band Selective Amplifiers
116
Fracarro Headline Accessories
125
Launch Amplifiers
117
Professional CAMs
126
Channel Processor
117
Fracarro Programmable Headend
127
Channel Converter
117
Fracarro Digital Modulator
127
Digital To Analogue Modulators
118
Channel Combiners
128
VSB Modulators
118
Digital Modulation
128–129
LNB Power Supplies
118
IPTV End to End Solutions
130–131
Mains Power Supplies
119
Kingray Modulator Rack
132
Accessories
119
Transmission Equipment
132
Multiswitches, Taps, Splitters & Amplifiers
133
Digital To Analogue Conversion
Fracarro Compact Line Series
120
Fibre Optic Solutions
A2B Micro Headend
120
Fracarro Fiber Optic
Digital Modulation
134–135
Mossman Fibre Optic
136
A2B QPSK & COFDM Processors
121
CATV products
A2B QAM Processors
122
Fracarro CATV Amplifiers & Accessories
A2B Electronics Accessories
122
Scientific Atlanta Passives
138
Fracarro COFDM Processors
123
Hardline Cable Accessories
139
Fracarro ASI–COFDM Modulator
123
CCTV Solutions
140
Fracarro Headline QPSK Processor
123
Fracarro Headline IP Processors
124
Fracarro Transport Stream Processor
124
137–138
Catalogue 106
115
MATV, SMATV & CCTV
FRACARRO K SERIES
SINGLE CHANNEL AMPLIFIERS
Flexible and highly selective modular headends that are easy to install. Mounting on a standard DIN Rail you can assemble
a scalable headend with a local power supply. Fracarro K Series headends represent excellent value for money and
uncompromising quality.
KF
Excellent selectivity allows the distribution of adjacent channels. 5 resonant circuit filters (4 for
UHF). Gain +9dB VHF +11dB UHF (adj. -45dB VHF, -35 dB UHF). Maximum output level 95dBμV.
Ideal for medium MATV distribution systems.
Tech Tip:
Combine with KW series final push pull amplifers for a low cost true single
channel solution with high output signal level.
K120A
K120
Ideal for all sizes of MATV distribution systems. Excellent
selectivity allows the distribution of even adjacent channels.
5 resonant circuit filters. Gain +45dB (adj. -40dB VHF, -30dB
UHF). Maximum output level 120dBμV.
Suits MATV distribution systems where input signal levels vary.
Automatic Gain Control provides a constant output level,
helpful with fluctuating off air signal levels, driving networks
with amplifiers in cascade and Fibre Optic networks. Excellent
selectivity even allows regulation of adjacent channels
thanks to 5 resonant circuit filters. Gain +45db, maximum
output level 120dBμV adjustable. Wide 30dB AGC dynamic
range (+/-15dB).
BAND SELECTIVE AMPLIFERS
Low cost whole band band amplifiers from Fracarro, with excellent flatness, high out of band rejection and channel traps.
116
Catalogue 106
KF/B3
All Band 3 (174-230MHz) amplifier. Gain +30dB (adj. -20dB). Maximum output
level 100dBμV. 3 tuneable channel traps to equalise input channels or eliminate
unwanted channels. Excellent in band flatness with high out of band rejection.
KF/B4
All Band 4 (470-590MHz) amplifier. Gain +13dB (adj. -20dB). Maximum output level
100dBμV. 3 tuneable channel traps to equalise input channels or eliminate unwanted
channels. Compatible with KF series single channel amplifiers.
KF/B5
All Band 5 (606-862MHz) amplifier. Gain +11dB (adj. -20dB). Maximum output level
100dBμV. 3 tuneable channel traps to equalise input channels or eliminate unwanted
channels. Compatible with KF series single channel amplifiers.
KF/BU
All Band 4 and Band 5 (470-862MHz) amplifier. Gain +30dB (adj. -20dB). Maximum
output level 100dBμV. 3 tuneable channel traps to equalise input channels or
eliminate unwanted channels. Compatible with KF series single channel amplifiers.
MATV, SMATV & CCTV
LAUNCH AMPLIFERS
KW33B
116dBμV maximum output level. Gain +34dB
(adj. -20dB). Full band output including S Band.
KW33C
120dBμV maximum output level. Gain +32dB
(adj. -20dB). Full band output including S Band.
Slope adjustment 0–20dB.
KW44C
120dBμV maximum output level. Gain +44dB
(adj. -20dB). Full band output including S Band.
Slope adjustment 0–20dB.
KW35E
129dBμV maximum output level. Gain +35dB
(adj. -20dB). Full band output including S Band.
Slope adjustment 0–20dB. Passive 5-30MHz
Return Path included.
KX125
Satellite 1st IF launch amplifier. 125dBμV
maximum output level, Gain +38dB@950MHz
+44dB@2,150MHz sloped gain (adj. -20dB), .
K series filter or processor broadband launch amplifiers.
CHANNEL PROCESSOR
KCP
Fully agile Channel Processor for Digital and Analogue
channels. VHF and UHF input with fully agile output. Double
SAW filters for high selectivity. Automatic Gain Control facility
to maintain stable output level.
CHANNEL CONVERTER
KK Series
Pre-programmed converters for the conversion of either
band 1, channel 7, channel 9 or channel 10 to UHF. Output
channel adjustable in 250 KHz steps with KTP programmer,
input filters factory fixed. Use with KF/..,K120/.. or K120A/.. to
filter output.
Catalogue 106
117
MATV, SMATV & CCTV
VSB MODULATORS
DIGITAL TO ANALOGUE MODULATORS
VSB modulators suitable for adjacent channels distribution.
Very clean output ideal for medium to large headends.
TO
PAL
KDTR-S
Receives a digital multiplex and converts one
service into an analogue channel. Ideal for
medium to large distribution systems such as
motels, hotels or hospitals with analogue TVs.
Full band modulator distributes signals from
47–862MHz. VSB modulator allows adjacent
channel distribution. RCA connectors with
audio/video signal available on all versions.
KDTS/VL-C2
Converts digital satellite signals to more robust
QAM for distribution around a cable system.
CA transparent. Set up with KTP programmer.
Max output level 90dBμV.
KMS
KCMU
KCMU/S
KCMV/S
TO
PAL
Modulator stereo VHF/UHF VSB modulator, full
band output (47-862MHz) with true Stereo. S
band included. Suitable for adjacent channel
distribution. Output level 90dBμV (adj. -15dB via
TPE). RCA audio and video input connectors.
Mechanical electrical and RF compatibity with KF
and K120 series single channel amplifiers.
Modulator mono UHF VSB modulator, all UHF
band output (470-862MHz). Output level 90dBμV
(adj. -15dB via TPE). RCA audio and video
input connectors. Mechanical electrical and
RF compatibity with KF and K120 series single
channel amplifiers.
Modulator stereo UHF VSB modulator, all UHF
band output (470-862MHz) with true Stereo.
Suitable for adjacent channel distribution. Output
level 90dBμV (adj. -15dB via TPE). RCA audio and
video input connectors. Mechanical electrical
and RF compatibity with KF and K120 series single
channel amplifiers.
Modulator stereo VHF VSB modulator all VHF band
output (174-382MHz) with true Stereo. Suitable
for adjacent channel distribution. Output level
90dBμV (adj. -15dB via TPE). RCA audio and
video input connectors. Mechanical electrical
and RF compatibity with KF and K120 series single
channel amplifiers.
LNB POWER SUPPLIES
KDF
Highly stable Free To Air DVB-S QPSK receiver.
Symbol rates from 2–35 MS/s for receiving
SCPC and MCPC signals. Automatic PID
update ensures A/V synchronisation and
reduces service calls for broadcaster
parameter changes. Modulator for VHF and
UHF output.
KDFU
Highly stable Free To Air DVB-S QPSK receiver.
Symbol rates from 1-45MS/s for receiving
MPEG2 signals. UHF output modulator.
118
Catalogue 106
K1-2
LNB power supply and 1st IF splitter, 14V or
18V DC @ up to 250mA and 22KHz tone. at 2
outputs @-5dB. 12V DC@500mA.
K2-8
Twin LNB power supply and active splitter.
Divides signals from 2 LNB inputs four ways, 0dB
insertion loss. Provides 14V or 18V LNB supply
and 22KHz tone. 12V DC@620-750mA.
MATV, SMATV & CCTV
POWER SUPPLIES
KP15
1.5 Amps 12V DC, 240V AC Mains power supply. 23W Max.
KP35
3.5 Amps 12V DC, 240V AC Mains power supply. 55WMax.
KP62
6.2 Amps 12V DC, 240V AC Mains power supply. 87W Max.
KP15
ACCESSORIES
KD100
Standard DIN mounting rail. Variable length.
35mm x 15mm x 1.5mm. Mounts all K series
modules. Length cut to size.
KPN42
KRF15
KPN42
42mm F type interconnect bridge.
KRF15
150mm Quick F shielded interconnect lead.
KRF45
450mm Quick F shielded interconnect lead.
TPE
Universal Fracarro programmer. Numeric key pad
and graphic display, easy to use.
KA600
KA600
KA800
Mounting cabinet 600mm high x 500mm wide x
180mm deep. Key locked, well ventilated, beige
in colour. Rear panel DIN rail ready. A better box,
easy to install.
Mounting cabinet 800mm high x 500mm wide x
180mm deep. Key locked, well ventilated, beige
in colour. Rear panel DIN rail ready. A better box,
easy to install.
Catalogue 106
119
MATV, SMATV & CCTV
DIGITAL TO ANALOGUE CONVERSION
CompactLine headends for the reception and analogue distribution of 6 digital terrestrial or satellite channels. The 6 digital
channels are remodulated into RF with stereo combined into a single output. A one box solution.
TO
TO
PAL
PAL
SIG9606S
Compact Line headend for the remodulation of 6 Digital
Terrestrial channels into 6 high quality analogue terrestrial
channels. Ideal solution for the distribution of FTA terrestrial
channels in hotels, motel, aged care facilities, MDUs or any
location with analogue TVs.
SIG9506S
Compact Line headend for the remodulation of 6 Digital
Satellite channels into 6 high quality analogue terrestrial
channels. Ideal solution for the distribution of FTA satellite
channels in hotels, motel, aged care facilities, MDUs or any
location with analogue TVs.
• Easy to install, everything included in one box
• Front panel control or via TPE
• Power Supply
• A/V DSB modulators, 470-862MHz.
• 6 COFDM receivers
• Includes 6 QPSK receivers, 6 A/V modulators, 6-way
combiner with existing TV signal mixing, power supply and
programming unit.
• A/V DSB modulators 174-446MHz, 470-862 MHz
• Combiner with existing TV signal mixing, mixes 6
RF channels
• A/V on RCA output for connections of external decoder.
• Powerful 100dBμV output level with separate adjustment
• Programmable and upgradable via PC.
• DSB Full Band modulator to remodulate programs into UHF
& VHF band
• Heat dissipation by convection, no fans required.
• Software available to set headend using PC
• Possibility to upgrade the firmware on site via PC
• Heat dissipation by natural convection, no fans required
MyM PRO 6T Micro Headend
TO
PAL
• 4 COFDM Receivers(two separate inputs)
• Double Ethernet — RJ45 ports
• MPEG2 / MPEG4 h.264AVC decoding for 6 HD or SD digital
channels with HD-downscalling
• 4 Common Interface slots for Multi-decryption
• A/V DSB modulators, 160–862MHz with loop through of
VHF/UHF/FM. NICAM and A2 Stereo.
• AV output for VSB modulators or monitoring
MyM PRO is a professional headend for the conversion of 6
digital channels from 4 digital terrestrial multiplexes. MyM PRO
is a wall mounted product that combines ease of use, cost
efficiency and high performance — all in one box.
120
Catalogue 106
• Built in high quality fan for cooling
MATV, SMATV & CCTV
DIGITAL MODULATION
Laceys.tv is proud to offer a revolutionary range of new products for digital modulation. As the pace towards digital switchover
increases, the range of market requirements and opportunities opens up to digital solutions. Products from established
European manufacturers such as A2B Electronics and Fracarro offer a new level of innovation, flexibility and picture quality.
A2B ELECTRONICS — QPSK & COFDM PROCESSORS
ETX-200
ESX-200
TO
/
TO
OR
OR
OR
OR
ESX-200 combines a QPSK / 8PSK tuner and ASI input with
a wide choice of outputs including COFDM, IP, ASI, QAM
and analogue. The product has Common Interface for
decryption and allows you to build your own multiplexes with
the inbuilt remultiplexing function. The tuner also handles ASI
input so you can combine ASI streams or AV inputs from up
to 4 set top boxes / DVD players / PCs (see DCC200 pg. 120)
and DCC210 pg. 122 with satellite TV content into a single
terrestrial multiplex.
• 1 x ESX-200 will generate at least 6 digital
terrestrial channels
• Option to descramble encrypted channels for free
distribution as DVB-T
ETX-200 combines a COFDM tuner and ASI input with a
wide choice of outputs including COFDM, IP, ASI, QAM and
analogue. The product has Common Interface for decryption
and allows you to build your own multiplexes with the inbuilt
remultiplexing function. The tuner also handles ASI input so
you can combine ASI streams or AV inputs from up to 4 set
top boxes / DVD players / PCs (see DCC200 pg. 120 and
DCC210 pg. 122) with terrestrial TV content into a single
digital multiplex.
• Option to descramble encrypted channels for free
distribution as DVB-T
• 1 x ETX-200 will generate at least 6 digital channels
• Common Interface slot for Conditional Access Module
• Common Interface slot for Conditional Access Module
• Output options include COFDM, QAM, IPTV and ASI
• QPSK / 8PSK Satellite Receiver for both SD and HD
transmissions
• Easy set up through embedded web browser
• Output options include COFDM, QAM, IPTV and ASI
• Individual power supply or 11 output power supply for
19” rack
• Cost effective
• Option to re-encrypt channels
• Easy set up through embedded web browser
• ASI input for a second transport stream
• Individual power supply or 11 output power supply for
19” rack
• Option to re-encrypt channels
• Handles teletext and program information
• ASI input for a second transport stream
• Powerful 102dBμV output level
• 19” Rack or wall mountable
• Cost effective
• Handles teletext and program information
• Powerful 102dBμV output level
• 19” Rack or wall mountable
Catalogue 106
121
MATV, SMATV & CCTV
A2B ELECTRONICS — QAM PROCESSORS
A2B ELECTRONICS — ACCESSORIES
ESC-100
/
TO
ESC-100
The ESC-100, from Swedish manufacturer A2B
Electronics is a QPSK to QAM (DVB-S to DVB-C)
transmodulator for SD signals transmitted in DVB-S.
It is designed for use on both VHF and UHF so that
every available channel on a Cable TV network
can be used. Exceptional performance based on
the latest digital platform.
ESC-200
ESC-200 is a QPSK / 8PSK to QAM (DVB-S / S2 to
DVB-C) transmodulator for SD and HD signals
transmitted in DVB-S and DVB-S2. It is designed for
use on both VHF and UHF so that every available
channel on a Cable TV network can be used.
Exceptional performance based on the latest
digital platform.
EBU100
19” base unit for a 19” rack cabinet. For 1 x EPP100
Power Supply and up to 7 x ESX200 / ETX200 /
ECX200.
EPP100
Power Supply. Mounts in EBU100 19” base unit.
100W output power. 11 separate 7.5v DC outputs.
2A current limit on each output. Input voltage
range 100-240V.
PS9EXM
EMU100
PS9EXM
Power supply plug pack. 9V DC for the
he ESX-200,
ETX-200 and ECX-200.
500200.01
Power cable to suit EPP100.
ESXCP
122
500200.01
Management Unit for the remote control of up to
20 E Series modules (i.e. ESC100 and ESC200) over
IP. RJ45 Ethernet connection.
Catalogue 106
35mm cover plate to cover empty bays for EBU100.
MATV, SMATV & CCTV
HEADLINE ASI–COFDM MODULATOR
The Headline series from Fracarro is a range of high
quality products designed for large SMATV and CATV
networks. It incorporates Fracarro’s 75 years plus
experience with Philips design.
SIG7121
The HeadLine series delivers professional AV and digital
television solutions with the very best picture quality by
employing innovative electronic technologies in a proven
mechanical system.
HeadLine products are designed for commercial
properties such as MDUs, mining camps, broadcast
environments and public arenas. The modules guarantee
electrical performance and can be installed in a variety
of configurations within the same headend. HeadLine
allows highly selective and agile signal filtering and the
distribution of codified programs.
Each HeadLine module is hot swappable and
incorporates a complete mains power supply, which
means headends may be updated easily with
minimum downtime.
ASI
TO
SIG7121 modulates an ASI input — to COFDM according to
the DVB-T standard, from DCC200 AV encoder or DCC210
HDMI to ASI encoder or almost any AV signal. SIG7121 is
a cost effective solution that provides outstanding picture
quality.
The SIG7121 meets all relevant Australian standards. SIG7905
Controller Host and FHM software can provide remote
configuration and monitoring. ASI stream can be looped to
additional modulators with SIG7901 or SIG7902 base unit (See
pg. 126).
• COFDM modulator with front panel ASI input
• Process the outputs into your own Digital Multiplex
• Full Band 1 to Band 5 output in COFDM
• Front panel Combiner input
• Laptop set up for easy maintenance
HEADLINE COFDM PROCESSORS
HEADLINE QPSK PROCESSOR
SIG7100
SIG7540
/
TO
TO
TS
TS
Process COFDM input to Transport Stream Output. The
common interface slot enables decryption of scrambled
services when used with CAM. Convert the Transport Stream
Output into IP with the SIG7720 (see over). Manage remotely
via SIG7905.
Process QPSK input to Transport Stream Output. The common
interface slot enables decryption of scrambled services
when used with the appropriate CAM. Convert the Transport
Stream Output into COFDM with the SIG7120 (see over).
Manage remotely via SIG7905.
• Digital Terrestrial receiver with Transport Stream Output
• Digital satellite receiver with Transport Stream Output
• Common interface slot for Conditional Access
Module(CAM)
• Common interface slot for Conditional Access Module(CAM)
• HD Compliant
• Remote configuration and monitoring via controller host
SIG7905 and FHM software
• HD Compliant
• Remote configuration and monitoring via controller host
SIG7905 and FHM software
Catalogue 106
123
MATV, SMATV & CCTV
FRACARRO HEADLINE IP PROCESSORS
SIG7710
SIG7720
/
TS
TO
TO
Encodes Transport Stream to IP with up to 100 Mb/s input.
Multicast/Unicast encapsulation IP option. Embedded web
browser for local or remote management with laptop or PC.
Encodes digital satellite channels into IP with up to
20 Mb/s from one satellite transponder. Multicast IP option.
Embedded web browser for local or remote management
with laptop or PC.
• Suitable for network distribution where high quality signals
are required
• Individual IP address for each channel
• Supports both UDP and RTP protocol
• Individual IP address for each channel
• Password protection for web management
• Supports both UDP and RTP protocol
• Programming possible with TPE
• Password protection for web management
• Programming possible with TPE
Encodes digital terrestrial channels into IP with up to 20 Mb/s
from one DTT Multiplex. Multicast IP option. Embedded web
browser for local or remote management with laptop or PC.
SIG7730
• Suitable for network distribution where high quality signals
are required
• Supports both UDP and RTP protocol
• Programming possible with TPE
TO
• Individual IP address for each channel
• Password protection for web management
FRACARRO HEADLINE TRANSPORT STREAM PROCESSOR
Modulates Transport Stream input from the SIG7100 (see
above) through the back frame into COFDM. The front
panel includes F connectors for mix-in and RF output of
modulated signal. Manage remotely via SIG7905.
SIG7120
• High output level 85dBμV.
• Modulator with Transport Stream input on back panel.
• F connectors for mix-in and RF output of modulated
signal.
TS
TO
• Programmable via Controller Host SIG7905 and via
software FHM.
• New Headline housing for professional installations in
19” racks.
124
Catalogue 106
MATV, SMATV & CCTV
HEADLINE PROFESSIONAL HEADENDS
SIG7340
SIG7330
/
/
TO
TO
PAL
PAL
OR
OR
TS
TS
QPSK receivers with audio/video outputs on RCA (cinch)
connectors to receive free-to-air digital satellite programs.
The SIG7330 module has also a TS output on the back panel.
One input and one loop-through output for the connection of
several receivers on the same SAT polarity.
• LNB supply, 14/18V 0/22KHz, DiSEqC 1.0
• Software download possible at the installation site.
QPSK receivers with Common Interface slot to receive free-toair or encrypted digital satellite programs available on audio/
video outputs with RCA (cinch) connectors. The SIG7340
module has also a TS output on the back panel. Loop-through
output for the connection of several receivers on the same SAT
polarity.
• CI slot available to decode the encrypted programs.
Compatible with more than 150 existing CAMs.
• Programmable via FHM software.
• Module can be used as a second CAM card.
• Generate 14 or 18V, 22 KHz tone and DiSEqC 1.0, suitable
to power LNB or to control multiswitch output.
• Programmable via FHM software.
SIG7531
VSB Modulators
TO
PAL
OR
TS
AV
TO
COFDM receivers to distribute free-to-air digital terrestrial
programs. They can also be installed as a single unit to
distribute one program through RCA outputs (for MPEG-2
compressed programs).
•
Ideal solutions for regeneration of DTT signal.
PAL
SIG7282S
Stereo audio, fully agile Vestigial Side Band
modulator. Output selectable between 47 and
862MHz. Double conversion, double SAW filters
and tracking filter create very high C/N ratio in
band that allows the distribution of more than 80
channels. Manage remotely via SIG7905.
SIG7282
PAL B/G mono, fully agile Vestigial Side Band
modulator. Output selectable between 47 and
862MHz. Double conversion, double SAW filters
and tracking filter create high C/N ratio in band
that allows the distribution of more than 80
channels. Manage remotely via SIG7905.
• Enables the audio/video signal to be available as a TS
MPEG2/MPEG4 form distributed from the back panel.
• Loop-through input for the connection of several receivers
on the same SAT polarity
• Remote configuration and monitoring (via SIG7905
controller host and FHM software.
• HD compliant.
HEADLINE TS—QAM OR ASI
SIG7111
The SIG 7111 modulates a signal received from the ASI input to DVB-C standard
(using QAM modulation). It can be used to modulate different analogue
signals coming from the SIG7404 encoder or to modulate Transport Stream
available on the back panel from digital receivers.
• QAM Modulator with ASI input on the front panel.
ASI
TO
• Remote configuration and monitoring.
• HD Compliant.
• MPEG4/MPEG2 Compliant.
Catalogue 106
125
MATV, SMATV & CCTV
FRACARRO HEADLINE ACCESSORIES
Base Units with Control Module
SIG7905
Controller host module for remote control of all Headline
series headend modules. 1 x RS232 port, 1 x Ethernet port and
2 x USB host ports. Enables local and remote management of
modules. Allows remote monitoring and alerts.
• Local direct connection, PC to Headend
• Remote connection via Ethernet (LAN)
• Remote connection via external modem (PSTN Or GSM)
• SMS / email alert system
SIG7901
19” base unit for a 19” rack cabinet.
Interconnection module SIG7900 included. For 12
Headline modules (1 x SIG7900 Interconnection
module + 11 other Headline modules). SIG7901 is
rack mountable, with all the accessories included
in the packaging (mains cord, extracting tools,
channel labels and module labels).
SIG7902
Base unit for wall mounting. Interconnection
module SIG7900 included. For 7 Headline modules
(1 SIG7900 Interconnection module + 6 other
Headline modules). SIG7901 is rack mountable,
with all the accessories included in the packaging
(mains cord, extracting tools, channel labels and
module labels).
SIG7904
Front blanking plate, 3RU high x 1 slot wide, to
be used with SIG7901 and SIG7902 to cover
empty bays.
PROFESSIONAL CAMS
VASTCAM
IRDECAM
Irdeto Professional PCMCIA Conditional Access Module.
Descrambles 6 channels simultaneously. Embedded 32-bit
CPU (ARM7TDMI). Supports common descrambling algorithm.
126
Catalogue 106
VAST Professional PCMCIA Conditional Access Module.
Descrambles 6 channels simultaneously. Embedded 32-bit
CPU (ARM7TDMI). Supports common descrambling algorithm.
MATV, SMATV & CCTV
FRACARRO FR PRO PROGRAMMABLE HEADEND
FRPRO is a new headend that provides highly selective filtering
and amplification of TV Channels. Extremely flexible, it enables
UHF Channel Clusters to be selected from any of the 3 inputs
thanks to an input distribution matrix. The 4 versions available
cover most installation requirements. FRPRO headends are
programmed by either the built in control unit or a PC with
FRPRO software, available at no extra cost. A USB port enables
the installer to save configurations on a USB memory stick.
FRPRO headends can be installed in just a few minutes with
the self alignment function, that automatically measures and
adjusts the power of each channel as required.
FRPRO 10
Inputs
Frequency
Selectable Cluster On Inputs
FM
B. III+DAB
AUX
UHF1
UHF2
UHF3
88–108MHz
174–300MHz
47–862MHz
470–862MHz
470–862MHz
470–862MHz
-
-
-
UHF1: 8,9,10
-
-
-
UHF2: 5,6,7,8,9,10
-
-
-
Gain
46dB
46dB
36dB
43dB
43dB
43dB
Dynamic Adjustment (on each input)
20dB
20dB
20dB
20dB
20dB
20dB
-
-
-
20dB
20dB
20dB
90dBμV DTT
85BμV DTT
110BμV DTT
90BμV DTT
90BμV DTT
90BμV DTT0
12/24V
12/24V
Cluster Adjustment
Master Level Adjustment
Max. Input Level
20dB
Max. Output Level
Remote Power (max. 250/100mA)
UHF3: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
121dBμV DTT
No
No
No
12/24V
FRACARRO DIGITAL MODULATOR
Inputs & connectors:
Video: Composite, 1 x RCA; Audio:
Stereo, 2 x RCA. RJ45 for control
via TPE handheld programmer and
software upgrades.
RF Output & Connectors:
F female x 1, RF Mix Input F female x 1
Video Input Level:
.7 to 1.5 Volts peak to peak
Audio Input Level:
.7 to 1.4 Volts peak to peak
MOD-COFDM
Audio Level Adjustment:
Channel Name:
-6 to +34dB (in respect to 1Vp nom.)
or Auto. Level Control
default ‘EXT SRC 1’ program with TPE
(14 Characters max.)
Logical Channel Numbering: from 1 to 999 (100 default)
Video Aspect Ratio:
4:3, 16:9 or AUTO (detected from
input signal)
Converts composite Analogue Video and Audio from
Video Cameras, Security Cameras, DVD players and
set top boxes etc. (PAL, NTSC or SECAM) into digital
terrestrial. Retains picture quality across large or small
distribution networks.
Output channel bandtwidth:
7 or 8 MHz
Numbers of Carriers:
8,000 (8K)
Modulation types:
QPSK , 16QAM or 64QAM selectable
FEC:
1/2, 2/3, 3/4, 5/6 or 7/8
High compatibility with Australian televisions. Excellent
picture quality.
Guard Interval:
1/4, 1/8,1/16 or 1/32
Output Frequency range:
470 - 862 MHz
Easy to maintain and simple to install
Output Level:
60 - 90 dBuV, adjustable in 1dB steps
Output MER:
>33dB
Catalogue 106
127
MATV, SMATV & CCTV
CHANNEL COMBINERS
COM6
Six input, single output channel combiner with dual
cavity filters and level adjustment for each input. These
properly filtered channel combiners are ideal for mixing
the outputs of multiple modulators, set top boxes or any
other modulated source without the noise associated with
combining splitters, taps or other broadband devices.
Channel inputs are user tuneable with a noise source and
spectrum analyser or can be set at time of order.
Insertion Loss ~4dB.
COM12
Twelve input, single output channel combiner with dual
cavity filters and level adjustment for each input. These
properly filtered channel combiners are ideal for mixing
the outputs of multiple modulators, set top boxes or any
other modulated source without the noise associated with
combining with splitters, taps or other broadband devices.
Channel inputs are user tuneable with a noise source and
spectrum analyser or can be set at time of order.
Insertion Loss ~4dB.
COMPOSITE TO ASI DIGITAL MODULATION
DCC200
A MPEG encoder that converts composite outputs from set
top boxes, DVD players, security cameras, PCs etc. into an
ASI transport stream. The ASI transport stream can then be
converted into COFDM using the SIG7121, the ESX200 or the
ETX200 (see pg. 117).
• Takes any 4 composite Analogue outputs from Video
Cameras, DVD players and set top boxes
• Laptop / LCD interface for simple installation
• Advanced compression and multiplex technology
• Set the bit rate of each channel from 1 to 15Mb/s
• Personalise each channel name
• Proven track record of reliability and stability
• Adjustable video parameters and audio standards
Cost-effective conversion of composite outputs into Digital
• Advanced compression and multiplex technology
• Set the bit rate of each channel from 1 to 15Mb/s
• Personalise each channel name
• SIG7121 from Italian manufacturer, Fracarro
• Proven track record of reliability & stability
• Adjustable video parameters and audio standards
• 8, 12 and 16 channel kits also available
• IP output now available
128
Catalogue 106
MATV, SMATV & CCTV
HDMI / SDI / COMPONENT TO ASI DIGITAL MODULATION
DCC210
Convert a HDMI, HDSDI or Component output into 1 ASI HD
transport stream and IPTV. The DCC-210 connects directly
to the Fracarro SIG7121 so you can convert the ASI transport
stream into digital terrestrial COFDM in HD. Works with set top
boxes, Blu Ray players, studio cameras, computers & any
product with HDMI, HDSDI or Component output.
• Separate ASI & IP outputs
• Easy set up with LCD display or through your laptop
• Create your own channel names or use defaults
• Advanced compression & multiplex technology
• Set the bit rate of the channel from 0.4–19Mbs
• Proven track record of reliability & stability
• Adjustable video parameters & audio standards
HDMI TO HD DIGITAL DTT MODULATOR
DCC301
• HDMI Full HD input with 1080i / 720p resolution.
An exciting new product that allows you to convert any HDMI
source directly to digital terrestrial. It converts HDMI output
from Blu-Ray players, games consoles, DVD players and set
top boxes into high definition COFDM.
The full standard HDMI modulator is simple to install and easy
to maintain.
• Even supports PC video playout via DVI—HDMI cable.
• Full HDCP support.
• Full Band HD terrestrial output in 1080i / 720p resolution.
• Plug and play setup or create your own channel name,
Logical Channel Number and RF output channel.
• Laptop web browser interface for easy installation or use
integrated keyboard display.
• Best possible MPEG4 picture quality, no compromise!
• Professional Grade MER >30dB for excellent signal quality.
4 CHANNELS HDMI TO HD DIGITAL DTT MODULATOR
DCC304
An exciting new product that allows you to convert any 4
HDMI sources directly to digital terrestrial and IPTV.
• HDMI Full HD input with Full Band 1080i / 720p resolution
HD terrestrial output.
It converts HDMI outputs from Blu-Ray players, games
consoles, DVD players and set top boxes into high definition
COFDM and IPTV
• Full HDCP support.
The full standard HDMI modulator is simple to install and easy
to maintain.
• Plug and play setup or create your own channel name,
Logical Channel Number and RF output channel.
• Full Band HD terrestrial output in 1080i / 720p resolution.
• IPTV output, UDP Multicast with full IGMP support.
• Best possible MPEG4 Picture Quality, no compromise!
• Professional Grade MER >30dB for excellent signal quality.
• ASI in / out to combine with other content sources.
Catalogue 106
129
MATV, SMATV & CCTV
THE COMPLETE FRACARRO END TO END SOLUTION FROM LACEYS.TV
All the services/hardware
Live TV
Guest Services
• Terrestrial and PAY TV available.
• 1 remote to control both STB & TV (16:9 and 4:3).
• EPG and Mini Guide with digital signage.
• PVR functionality with Live pause, rewind / fast forward.
• Information pages suitable for displaying local information
about the hotel, the city and local businesses
• Hotel information fo hotel services, telephone directory,
restaurants, fitness clubs etc.
• Digital Signage Controls the contents shown on
public screens.
• Compounds advertising screens dynamically.
• Send announcements to screens as response of events.
• Significant opportunity for advertising income.
Video on Demand
Infotainment
• Box office entertainment for each guest.
• Interactive applications.
• Content packages and pricing options available.
• YouTube, Facebook, Flickr, games, currency exchange
app and world clock.
• Integrates into the existing Property Management System.
• PIN for parental control.
• Full featured web-browser with HTML5, advanced
Javascript support.
• PVR functionality with Live pause, rewind / fast forward.
• Alarm.
130
Catalogue 106
MATV, SMATV and CCTV
Integrated Billing Services
Digital Advertising
• Automatic pop ups on certain user interactions.
• Integrates into the existing PMS system.
• Pop ups forced by the provider from the management
console
• Enables the guest to buy both products and services.
• Banners on different sections and areas of the screen.
• Static and dynamic text and graphical banner options
based on different banner server parameters.
• Allows the guest to access their billing account.
• Information management tool.
• To be defined based on customer needs.
Headends
SIG7710
Middleware
SIG7720
SIG7730
• Menu generation.
• Wide range of IPTV streamers available.
• Content authorization.
• Terrestrial, Satellite, PAYTV, composite & HDMI inputs.
• Billing
• UDP / RTP transmission protocol.
• Statistics collection.
• Multicast steaming.
• DVB-IP gateways management.
The Servers
Set Top Boxes
Laceys.tv offers a range of Servers and Storage Nodes for VoD,
Middleware, Digital Signage & Playout.
These units are developed with a purposeful design, energyoptimized technology, simplified systems management,
and the flexibility that make to suit applications from small
businesses to specialized applications for larger corporations.
Processor options and memory configurations are balanced to
run typical business applications such as Microsoft® Windows®
Small Business Server, Business Center Essentials, SQL Server®
Workgroup/Standard, Active Directory®, and SharePoint® as
well as Oracle® 11g Standard, VMware®, and file/print.
• Sophisticated Multimedia Centers that manage and play
content from DTT, Internet, WiFi connectivity or external
audio, video or storage sources.
• Connectivity with wireless networks (802.11g) up to
54Mbps and Ethernet.
• HDMI and composite outputs.
• USB & HDMI ports
Other options include advanced management capabilities,
low wattage power supply and external storage connectivity
options in an ultra-compact chassis.
Catalogue 106
131
MATV, SMATV & CCTV
KINGRAY MODULATOR RACK
PayTV
Approved
MD100US
UHF/DSB stereo modulator. Rack mountable.
MD100VS
VHF/DSB stereo modulator. Rack mountable.
KR001
The KR001 is a 19” rack or wall mount designed to rack mount and
combine Kingray’s new professional range of commercial products.
Up to six modules can be powered and combined via the passive
base. The single output provides an optional power switch for a launch
amplifier if required.
KR002
Add-on Passive Combiner to suit the KR001. The KR002 is designed to
fit on the back of the KR001. The kit allows the addition of an extra six
inputs and one output, providing a total of 12 inputs and 2 outputs on
the one 19” subrack/wall mount, if the KR002 is used in conjunction with
the KR001.
AP80
AP81
AP82
AP83
AP84
AP85
AP86
AP87
AP88
AP80SR
AP81SR
AP82SR
AP83SR
AP84SR
AP85SR
AP86SR
AP87SR
AP88SR
AP60
AP61
AP62
AP63
AP64
AP65
AP66
GME Kingray’s ‘AP’ range of DSB stereo modulator packages are a cost effective approach to many
head end projects. This package option allows for 6 to 8 channels to be modulated and combined
using MD100US &/or MD100VS modulators. This provides an ideal solution for reticulating modulated
RF signals throughout any system. Sources may include PayTV or digital set top boxes, VCRs and
security cameras.
KR001
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
KR002
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
MD100US
0
1
2
3
4
5
6
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
MD100VS
6
5
4
3
2
1
0
8
7
6
5
4
3
2
1
0
8
7
6
5
4
3
2
1
0
PSK18KR
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
AP PACKAGES — 6 STEREO MODULATORS
AP PACKAGES — 8 STEREO MODULATORS
TRANSMISSION EQUIPMENT
LBTU5M
Frequency Range 470 to 860 MHz
Output Power (Sync Tip) 5 Watts
Power Consumption 30 Watts max
Sync Compression <3%
In-Band Intermodulation < -40dBc
Output Impedance and connector 50Ω ‘N’ type
Metering Sync Tip Power Output, Input levels and Supply
Voltages
Mains Supply 240V AC 50Hz ±10% IEC socket
132
Catalogue 106
Linear Broadcast LBT-U series of UHF television transmitters
are available in: 2W, 5W, 10W and 50W power output
levels. The 5 watt model is contained in a 2RU high
standard rack case and includes its own internal switch
mode power supply. Convection cooling is employed on all
models for optimum performance in Australian conditions.
A front panel LCD display indicates Output Power, Video
input level, Audio input levels and supply voltages. Rack
cases are finished in powdercoat for durability. They can
be ordered with a DVB-T Modulator for ASI input, DVB-S2
Processor for VAST input, or AV inputs. All models carry our
twelve month factory warranty on parts and labour.
MATV, SMATV and CCTV
MULTISWITCHES,, TAPS,, SPLITTERS & AMPLIFIERS
PayTV
Approved
PayTV
Approved
DAAMP5
5 input SMATV amplifier. 4 x satellite inputs and 1
x terrestrial input. 18V for LNB powering on SAT1
and SAT2 horizontal. Gain and slope control.
Gain 22 +/-2 dB SAT, 22 +/-2 dB FTA. Foxtel approval
MM-DV25
Terminator, 75Ω, F Connector DC block.
MM-MSR512
Multiswitch main powered, 5 in x 12 out.
MM-MSR516
Multiswitch main powered, 5 in x 16 out.
MM-MSV508
Multiswitch remote powered, 5 in x 8 out.
MM-MSV512
Multiswitch remote powered, 5 in x 12 out.
MM-MSV516
Multiswitch remote powered, 5 in x 16 out.
MM-MSV524
Multiswitch remote powered, 5 in x 24 out.
MM-MSV532
Multiswitch remote powered, 5 in x 32 out.
MM-SS504
Splitter, 2 way.
MM-SS510
Cascadable tap/splitter. 4x Sat 1x Ter. Insertion
loss -10dB.
MM-SS515
Cascadable tap/splitter. 4x Sat 1x Ter. Insertion
loss -15dB.
MM-SS520
Cascadable tap/splitter. 4x Sat 1x Ter. Insertion
loss -20dB.
F30538
PayTV
Approved
A
MS58SM
MS516SM
Multiswitch 5x in 8x out. Foxtel approval F30499
Multiswitch 5x in 16x out. Foxtel approval F30500
MS38SM
PayTV
Approved
PayTV
Approved
MT510
Cascadable multitap, 4x Sat 1x Ter. Insertion loss
-10dB 1 way multitap. 4 Satellite inputs and 1
terrestrial input. Foxtel approval F30424
MT515
Cascadable multitap, 4x Sat 1x Ter. Insertion loss
-15dB 1 way multitap. 4 Satellite inputs and 1
terrestrial input. Foxtel approval F30425
MT520
Cascadable multitap, 4x SAT 1x Ter. Insertion loss
-20dB 1 way multitap. 4 Satellite inputs and 1
terrestrial input. Foxtel approval F30541
MS24SM
Multiswitch 2x in 4x out.
MS28SM
Multiswitch 2x in 8x out.
MS34SM
Multiswitch 3x in 4x out.
MS38SM
Multiswitch 3x in 8x out.
AIMS3W4
PayTV
A
Approved
SP52FA
SP54FA
Splitter 5 input 2 way multisplitter. 4 Satellite
inputs and 1 terrestrial input. Foxtel approval F30426
Splitter 5 input 4 way multisplitter. 4 Satellite
inputs and 1 terrestrial input. Foxtel approval F30427
AIMS3W4
AIMS3W8
Sat. inputs:
2
2
Ter. inputs:
1
1
Outputs:
4
8
Sat. gain:
0–6dB
3dB
Ter. gain:
-10dB
-16dB
Input/Output return loss: ≥10dB
≥10dB
Transparent LNBF power, external power supply not required.
Wall mountable with ground terminal.
Catalogue 106
133
MATV, SMATV & CCTV
FIBRE OPTIC SOLUTIONS
FRACARRO FIBRE OPTIC
The OPT-TX51 and OPT-RX51 are part of a new range of optical transmitters and receivers. Unlike standard optical equipment,
the OPT-TX51 converts and distributes terrestrial and 4 satellite polarities through one Single Mode fibre, saving time and money
in installation. The OPT-RX51 converts the terrestrial and satellite signals back to RF for further distribution. Ideal for long distance
signal distribution. Only one fibre optic cable required for all signals (SAT, DTT, analogue, CCTV, Ethernet etc.)
•
•
•
•
•
Ideal for long distance distribution
Electrical isolation between equipment
Resistant to water and humidity
Immune to electromagnetic interference
Low power consumption, low impact on the environment
OPT-TX51 Transmitter
Fibre ports
1 out + 1 out aux
Wave length
1260-1600nm
Output power
10dBm
Bandwidth
47-2200MHz
10dBm
Gain
4dB
5 Polarities, only 1 Fibre!
Max input level
117dBμV
Power Supply Vac, Hz
220-240, 50-60
Fibre ports
1 input + 1 in aux
Wave length
1260–1600nm
Input power
-12 to +5dBm
Bandwidth
47-2200MHz
Gain
4dB
Max output level
110dBμV
Power Consumption mA@14V
260
Power Supply Vac, Hz
14–18V from multiswitch
OPT-RX51 Receiver
Tech Tip:
To achieve the long distances possible with FO, we recommend Single Mode fibre be installed.
Features:
• 4 satellite polarities (950-2200MHz) and terrestrial bandwidth (47-862MHz)
transmitted using just 1 fibre optic cable
• HD compliant
• DVB-S, DVB-S2, DVB-T and DVB-T2 compliant
• Auxiliary input/output for additional services/devices (Ethernet/TVCC/….)
• Can supply up to 300mA on SAT inputs
• High RF input level
• Remotely powered from a multiswitch
134
Catalogue 106
MATV, SMATV & CCTV
A 4 way optical transmitter and a 4 way optical receiver for Satellite and
terrestrial signals in the same housing. The OPT-TX54 has 5 RF inputs (4 satellite
and 1 terrestrial) and 4 optical outputs. The OPT-RX54 converts the 4 optical
inputs to 5 RF outputs (4 satellite and terrestrial) for further distribution. Ideal for
long distance signal distribution.
OPT-TX54 & OPT-RX54
4dBm
OPT-TX54
OPT-TX54
OPT-RX54
Fibre ports
4 out
4 in
Wave length
1260–1600nm
1260–1600nm
Input power
-
-12 to +5dBm
Output power
4dBm
-
Bandwidth
47–2200MHz
47–2200MHz
Gain
9dB
4dB
Max input level
120dBμV
-
Max output level
-
115dBμV
Power Consumption mA@14V
-
260
Power Supply Vac, Hz
220–240, 50–60
14–18V from multiswitch
Features:
• HD compliant
• DVB-S, DVB-S2, DVB-T and DVB-T2 compliant
• Can supply up to 300mA on SAT inputs
OPT-RX54
• High optical budget
• High RF input level
• Remotely powered from a STB/MSW
KSP1_2 & KSP1_4
KTX & KRX
KTX
KRX
6dBm
KTX optical transmitter converts RF TV and SAT signal to an
optical signal. KRX optical receiver converts the optical signal
into RF signal for further local distribution. SC/ACP connectors
on the optical input. K-Series profile, mounts on KD100 din rail.
KTX
KRX
Wave Length
1310±20nm
1100±1600nm
Input power
-
-10 to +6dBm
Output power
6dBm
-
Bandwidth
47–2150MHz
47–2150MHz
Return Loss
>12dB
>12dB
Max input level
89dBμV (88-860MHz)
79dBμV (950-2150MHz)
Max output level -
94dBμV (88-860MHz)
84dBμV (950-2150MHz)
Power
Consumption
80mA
150mA
Power Supply
12V
12V
KSP1_2 splits the optical signal into two outputs, KSP1_4 into
four outputs. These items can be installed anywhere in the
distribution network without using a power supply. K-Series
profile, should be mounted on KD100 din rail.
KSP1_2
KSP1_4
Fibre ports
2 out
4 out
Wave length
1310nm, 1550nm
1310nm, 1550nm
Insertion Loss
3.2dB
6.4dB
Return Loss
>45dB
>45dB
Isolation
>45dB
>45dB
Connector Type
SC/APC
SC/APC
Catalogue 106
135
MATV, SMATV & CCTV
MOSSMAN FIBRE OPTIC
MOS100PTX
Optical Transmitter, 10dBm Output.
MOS800PPRT
Optical node, Optical In/Out.
OMCRACK
Optical to Ethernet Media Card Rack.
OMCCARD
Optical to Ethernet Card, 1Gb/s capable.
Optical Splitters
Optical Accessories
SC/APC
OPSP1X8
40SC/APC
OPSP1X2
Optical Splitter, 1 x 2.
OPSP1X4
Optical Splitter, 1 x 4.
OPSP1X5
Optical Splitter, 1 x 5.
OPSP1X6
Optical Splitter, 1 x 6.
OPSP1X8
Optical Splitter, 1 x 8.
OPSP1X9
40-SC/APC
Fibre Optic Double End Female to Female
connector.
BR2-AA
Single mode patch cables / 2m with
connectors. SC/APC-SC/APC.
BR4-AA
Single mode patch cables / 4m with
connectors. SC/APC-SC/APC.
Optical Splitter, 1 x 9.
PIGTALE
1m pigtail. SC/APC
OPSP1X10
Optical Splitter, 1 x 10.
SC/APC
SC/APC to SC/APC 1.5 Metre Lead.
OPSP1X12
Optical Splitter, 1 x 12.
Optical Taps and Splitters can be configured to your order!
136
Catalogue 106
MATV, SMATV & CCTV
CATV
FRACARRO CATV AMPLIFIERS
• High output level and low power consumption using GaAs
FET hybrid technology.
• Gain and tilt adjustable with attenuators (AMP522AL–
AMP522AM) or using PAD (AMP522PL–AMP522PM).
• Mains or Line Powered with internal switch mode power
supply.
• Integrated active or passive return path, switchable.
• Die-cast aluminium housing provides IP65 protection.
• 5A AC feed through to any port and 10A external AC input
terminal.
• Excellent surge and transient protection.
AMP522AL
Line powered CATV amplifier. Bandwidth
47-862MHz, Gain 30dB VHF, 38dB UHF. Gain
adjustment 0–18dB via attenuators. Linearity
±1dB, Voltage 24–65Vac, line power current
540–250mA.
PS6A-60
Power supply for AMP522AL 6AMP.
AMP522.. Diplexer Modules
Order relevant accessories to meet your requirements:
• 2 x diplexer filter modules MDA (see below), or if return
path is not required replace with two ML02 link modules.
• Amplifiers supplied with PG11 threads, for adaptors see p.
137.
• AMP522Ax: 1 x interstage module MEX, if filtering is not
required replace it with one ML01 module.
AMP522AM
AMP522.. Splitter Modules
MS100
MDA3047
MDA3047
CATV AMP5222 Diplexer 47–862MHz.
MDA6587
Forward and return path diplexer 65–862MHz.
Diplexer filter modules for use with the AMP522 amplifier
range to mix/demix the return path and forward path.
Mains powered CATV amplifier. Bandwidth
47–862MHz, Gain 30dB VHF, 38dB UHF. Gain
adjustment 0-18dB via attenuators. Linearity
±1dB, mains power voltage 175-260Vac.
MS100
Output splitter for AMP522 series amplifiers.
MS206
Output tap 3.5dB–3.3dB for AMP522
series amplifers.
Splitter modules for use with the AMP522 amplifier range to fine
tune output values.
Catalogue 106
137
MATV, SMATV & CCTV
AMP522.. Link Modules
AMP522.. Interstage Modules
ML01
ML01
Link module ML01 is used as a bridge socket
for the interstage and/or return path modules
(2 pieces included in each amp.).
ML02
Link module is used as a bridge in the splitter
and diplex filter sockets.
MEX804/06
Frequency
MHz
Insertion
loss pos. A
47/862MHz dB
Insertion
loss pos. B
47/862MHz dB
MEX800/08
47-862
0/0
8/0.3
MEX800/06
47-862
0/0
6/0.3
Interstage modules designed to provide attenuation and
slope between the two different forward amplifier stages in
AMP522.. amplifiers.
SCIENTIFIC ATLANTA PASSIVES
FEATURES:
• Industry-leading insertion loss specifications reduce amplifier requirements.
• Unique, patented AC bypass coil provides superior hum modulation performance, which is important in
advanced, high current networks.
• Superior return loss specifications enable more reliable transmission of digital signals.
• Modular design allows board and cover to be changed without costly, reliability-impacting resplicing.
• Versatile housing design permits aerial or pedestal mounting.
• Power passing/blocking jumpers for increased maintenance flexibility without service interruptions.
• Interchangeability of faceplates for all DCs and splitters for simpler less expensive architectural changes.
• Durable powder coat finish for superior environmental protection.
Directional Couplers
Splitters
SAS2HC-G2
CATV 2 way splitter.
SADC12HC-G CATV -12dB directional coupler.
SAS3HC-G3
CATV 3 way splitter balanced.
SADC8HC-G
SAS3U-G
Multimedia splitter 1GHz 3 way unbalanced.
CATV -8.5dB directional coupler.
CATV Drop Taps
p
SATMM4
SATMM4-11
CATV Multimedia tap 1GHz, 4 way, -11dB tap.
SATMM4-14
CATV Multimedia tap 1GHz, 4 way, -14dB tap.
SATMM4-17
CATV Multimedia tap 1GHz, 4 way, -17dB tap.
SATMM4-20
CATV Multimedia tap 1GHz, 4 way, -20dB tap.
SATMM4-23
CATV Multimedia tap 1GHz, 4 way, -23dB tap.
SATMM2-4
CATV Multimedia tap 1GHz, 2 way, -4dB tap.
SATMM4-26
CATV Multimedia tap 1GHz, 4 way, -26dB tap.
SATMM2-8
CATV Multimedia tap 1GHz, 2 way, -8dB tap.
SATMM4-29
CATV Multimedia tap 1GHz, 4 way, -29dB tap.
SATMM2-11
CATV Multimedia tap 1GHz, 2 way, -11dB tap.
SATMM4-32
CATV Multimedia tap 1GHz, 4 way, -32dB tap.
SATMM2-14
CATV Multimedia tap 1GHz, 2 way, -14dB tap.
SATMM8-11
CATV Multimedia tap 1GHz, 8 way, -11dB tap.
SATMM2-17
CATV Multimedia tap 1GHz, 2 way, -17dB tap.
SATMM8-14
CATV Multimedia tap 1GHz, 8 way, 14dB tap.
SATMM2-20
CATV Multimedia tap 1GHz, 2 way, -20dB tap.
SATMM8-17
CATV Multimedia tap 1GHz, 8 way, -17dB tap.
SATMM2-23
CATV Multimedia tap 1GHz, 2 way, -23dB tap.
SATMM8-20
CATV Multimedia tap 1GHz, 8 way, -20dB tap.
SATMM2-26
CATV Multimedia tap 1GHz, 2 way, -26dB tap.
SATMM8-23
CATV Multimedia tap 1GHz, 8 way, -23dB tap.
SATMM2-29
CATV Multimedia tap 1GHz, 2 way, -29dB tap.
SATMM8-26
CATV Multimedia tap 1GHz, 8 way, -26dB tap.
SATMM4-8
CATV Multimedia tap 1GHz, 4 way, -8dB tap.
SATMM8-29
CATV Multimedia tap 1GHz, 8 way, -29dB tap.
138
Catalogue 106
MATV, SMATV & CCTV
HARDLINE CABLE ACCESSORIES
Hardline Connectors
HL500ST
HLFC6
HL750SL
HL500FM
HL7001
HL90
HLP3/500-F
HL111
HLPG11-RG11
HLPG11-F
HL500RAFM
HL90
Hardline .500 right angle stinger.
HL103
Hardline stinger .500 to F Male.
HL107
Hardline stinger .500 Female to Female.
HL108
Hardline right angle Female KS to Female KS port .
HL111
Hardline right angle .500 stinger to right angle stinger.
HL500FM
Hardline .500 connector to F Male.
HL500RAFM
Hardline .500 right angle to F Male.
HL500SPLICE
Hardline .500 splice Female to Female.
HL500ST
Hardline connector .500 stinger.
HL7001
Hardline .500 Joiner, stinger Female to stinger Female.
HL750SL
Hardline connector .750 stinger.
HLFC6
Hardline .500 Adapter, stinger Male to F Female.
HLP3/500-F
Adaptor, P3-500(KS) to F Female.
HLPG111-5/8
Adapter, PG11-5/8.
HLPG11-F
Adapter, PG11-F.
HLPG11-PG11
Stinger adapter, Male to Male.
HLPG11-RG11
Hardline PG11-RG11
HLHT106
Hardline .500 coring and stripping tool.
HL500SPLICE
Pillars
URDV1
Outdoor equipment pillar, base and bolts. Green colour.
Protects outdoor plant from the elements. 1x equipment
panel included with each unit. Ventilation holes included.
Lock system available.
URDV1
263x203mm equipment mounting panel.
URDV2
470x205mm equipment mounting panel.
Catalogue 106
139
MATV, SMATV & CCTV
CCTV SOLUTIONS
4 Channel DVR, H.264 compression. VGA
output. Adjustable resolution (max 720x570).
DVR VENEZIA 4
Recording, live, playback, control, back up and remote
connection. Alarm event(s) can be viewed by mobile phone,
PDA or smartphone. Central monitoring system (CMS) with
graphic interactive maps. Optional control keyboard.
16 Channel DVR, H.264 compression. VGA
DVR MILANO 16 and S-Video outputs. Adjustable resolution
(max 720x570)
Recording, live, playback, control, back up and remote
connection). Alarm event(s) can be viewed by mobile phone,
PDA or smartphone. Central monitoring system (CMS) with
graphic interactive maps. Optional DVD burner and
control keyboard.
CIR700-650OWDR
CIR700-650WDR
CIR700-POLE
Professional camera with 42 LEDs IR
illuminator. 6–50mm varifocal lens.
12V DC–24V AC.
DVR VISTA 4
Pole adapter for CIR700-650WDR.
High Definition Resolution 720 TVL. Day and Night vision with
mechanical IR filter, OSD menu with joystick.
4 Video and 4 Audio inputs Security recorder.
Multi screen real time browsing with remote
and mobile phone monitoring.
H.264 compression, 16 bit colour, USB-2 back-up, supports
1 x SATA 3.5” HDD for up to 2TB of storage (excluded). Easy to
use menu interface.
CIR540-49
CIR540-3.6
Compact camera with 24 LEDs IR
illuminator. 3.6mm focal length. 12V DC.
CIR540-49
Compact camera with 36 LEDs IR
illuminator. 4–9mm varifocal lens. 12V DC.
CIR540-922
Compact camera with 36 LEDs IR
illuminator. 9–22mm varifocal lens. 12V DC.
High Resolution 540 TVL and equipped with a 1/3” Sony Super
HAD CCD high sensitivity sensor. Infrared LED for night vision.
CIR420-3.6
Compact camera with 24 LED IR
illuminator. 3.6mm focal length lens.
CCD 420 resolution TVL colour camera, 1/3” SONY CCD
technology, 12 Volts DC. Split glass minimizes illuminator haze.
CDIR540-3.6
CDIR540-3.6
Dome camera with 24 LEDs IR illuminator.
3.6mm focal length.
Dome camera with 36 LEDs IR illuminator.
CDIR540-312
2.8–12mm varifocal lens.
High Resolution 540 TVL and equipped with a 1/3” Sony Super
HAD CCD high sensitivity sensor. Infrared LED for night vision.
140
Catalogue 106
CDIR420-49
Weatherproof dome camera with
integrated 36 LED IR illuminator. 4–9mm
varifocal lens.
CCD 420 TVL colour camera, 1/3” SONY CCD technology,
12 Volts DC. Split glass minimizes illuminator haze.
8
Contents
Satellite
Equipment
Satellite TV Dishes
C Band Scaler Feed Horns
144
142
C Band Satellite Dish
142
Multifeed LNB Holder
KU Band Satellite Dishes
142
Satellite Hardware
Satellite TV LNBFs
KU Band LNBFs
C Band LNBF
143–144
Mounts, DiSEqC Positioners, Linear Actuator
145
Satellite Accessories & Receivers
146
144
Catalogue 106
141
Satellite Equipment
SATELLITE TV DISHES
C BAND SATELLITE DISH
C-Band Prime Focus Polar Mount
Diameter:
2.27m
Focal Length:
92.5cm
Depth:
34.8cm
F/D Ratio:
0.40
Gain C-Band:
39.0dBi
Gain Ku-Band:
47.0dBi
Net Weight:
9Kg
Net Volume:
0.1860 CBM
AI2.3
KU BAND SATELLITE DISHES
Penta85 mount
AID85 mount
Now available with
quick release detachable
LNB arm for portable use.
DIGIT65
PENTA 85
A smaller Penta 85, Digit 65 out performs most
65cm dishes whilst looking different. Powder
coated steel construction supported on an
easy to use steel mount, quality from top to toe.
Cartons of 10 pieces minimise shipping costs.
Precision design equal in gain to premium quality
85cm and common 90cm offset dishes, Ku band
Penta’s unique five sided shape dramatically
reduces side lobes common in small dishes.
Made from powder coated steel (aluminium by
special order) and supported on a strong steel
mount. Cartons of 10 pieces minimise shipping
costs.
HSD Series
Aperture Efficiency:
AID65
AID85
>80%
>80%
Horizontal Axis:
65cm
81.2cm
Vertical Axis:
74cm
92cm
Gain @ 12.5GHz:
37.6db
39.8db
Focal Length:
32.5cm
40.6cm
F/D Ratio:
0.5
0.7
Elevation Alignment:
10o – 83o
10o – 83o
Pole Diameter:
30 – 48mm
30 – 48mm
Operation Wind:
90Km/h
90Km/h
Survival Wind:
180Km/h
180Km/h
Patented double rolled edge. Galvanised steel reflector.
Charcoal colour, powder coat finish. Stainless steel hardware.
40mm LNB clamp included.
MULTIFEED LNB HOLDER
HSD83 mount
$15!
F ROM
l it y
an Qua
Europe mance!
r
& Pe r fo
HSD73
KU Band Offset
Satellite Dish 73cm.
HSD85
Satellite Dish 85cm.
HSD102
Satellite Dish 102cm.
142
Catalogue 106
HMBF001
Fit multiple LNBs to one dish. Designed for HSD
Series suits most dishes. Allows 2 LNBs to see 2
satellites with only one dish.
Satellite Equipment
SATELLITE TV LNBFS
KFM21,
KFH21
PayTV
Approved
LNBQUAD
Recommended
for VAST
KFM21
Optus frequency range.
Local Osc. Frequency:
10.7GHz
Input Frequency Range:
11.7–12.75GHz
Output Frequency Range:
1,000–2,050MHz
Noise Figure:
0.7dB typical
Optus frequency range.
Local Osc. Frequency:
10.7GHz
Input Frequency Range:
11.7–12.75GHz
Output Frequency Range:
1,000–2,050MHz
Dual polarity Quad switch output, PayTV approved.
Dual polarity single output LNB for VAST, Aurora and
general usage. 10.7GHz L.O. fully employs high end of I.F.
for better bandwidth.
PayTV
Approved
KFH21
LNBDUAL
Optus frequency range.
Local Osc. Frequency:
11.3GHz
Input Frequency Range:
12.25–12.75GHz
Output Frequency Range:
960–1,450MHz
Noise Figure:
0.7dB typical
Dual polarity single output LNB for VAST, Aurora and
general usage. 11.3GHz traditional Optus L.O.
Optus frequency range.
Local Osc. Frequency:
10.7GHz
Input Frequency Range:
11.7–12.75GHz
Output Frequency Range:
1,000–2,050MHz
Ku band dual polarity dual output LNBF’s delivers both
horizontal and vertical polarities simultaneously. High isolation
between polarities, low noise, excellent local oscillator stability,
weatherproof o-ring and gasket seal inside outer housing.
PayTV approved.
KFCJ21
Universal single output LNB.
Local Osc. Frequency:
9.75/10.60GHz
Frequency:
10.70–12.75GHz
Noise Frequency:
0.3dB
Dual polarity single output, universal.
AIL107T
Optus frequency range.
EHC1600
LNB, C band, Digital Ready. Surge Protected.
R.F. Input:
3.7–4.2GHz
I.F. Out:
950–1,450MHz
L.O.Freq:
5,150MHz
Noise:
20°K–25°K
Gain:
65dB typical
Flatness:
±3dB
Local Osc. Frequency:
10.7 GHz
Power:
12–20V DC
Input Frequency Range:
11.7–12.75GHz
Current:
150mA
Output Frequency Range:
1,000–2,050MHz
Ultra compact design dual polarity dual output and
retractable sleeve ensures a waterproof installation. Meets
VAST specification.
Catalogue 106
143
Satellite Equipment
KFDJ22
Input Connectors:
F/D Ratio 0.6
Input Reflector Type:
Offset
Cross Polarity Isolation:
20dB(Min.) 28dB(Type.)
Conversion Gain:
50dB(Min.) 62dB(Max.)
Gain Flatness:
±0.5dB per 27MHz
Twin Universal
Unique double feedhorn provides simultaneous access to 2
satellites 6 degrees apart thanks to an integrated 2 output
DiSEqC 2.0 switch. Dual polarity single output x2, universal.
Local Osc. Freq. Stability:
@25°C: ±1MHz over -30°C to
+60°C ±3MHz
Local Osc. Phase Noise:
@1 KHz Offset -60dBc/Hz
@10 KHz Offset -80dBc/Hz
@100 KHz Offset -100dBc/Hz
International frequency range
Low Band Hi Band
Output Power:
Local Osc. Frequency:
9.75GHz 10.6GHz
1dB Gain Compression
Pointß 0dBm(Min.)
In Band Harmonic Distortion:
58dB(Max.)
Input Frequency Range:
10.7–11.7 11.7–12.75GHz
Output Frequency Range:
950–1,950 1,100–2,150MHz
Output Power @ 1dB
Compression Point:
0dBm(Min.)
Noise Figure:
.7dB typical
Output Return Loss:
>7.5dB
C BAND LNBF
C BAND SCALER FEED HORNS
CFD21B
CFH-01
Input frequency range:
3.4–4.2GHz
Output frequency range:
950–1,750 MHz
Local Oscillator freq:
5,150 MHz
Noise Temperature:
15°K
F/D Ratio:
0.28-0.42 adjustable
Cross Pol. Isolation:
20dB typical
Conversion Gain:
65dB
Gain Flatness:
±1dB over 36MHz
L.O. Frequency Stability:
@25°C ±1MHz
-40° to +60°C ±2.5MHz
Local Oscillator Phase Noise:
@1KHz Offset -70dBc/Hz
@10KHz Offset -90dBc/Hz
@100KHz Offset -105dBc/Hz
Image Rejection:
40dB minimum
Output Power @1dB
Compression Point:
0dBm (min.)
Output Return Loss:
7.5dB
Output Connector:
F type Female 75Ω
Current Consumption:
80mA max.
Polarity Switch:
Vertical 11.5–14.2V DC
Horizontal 15.8–19V DC
Operating Temperature:
-30°C to +60°C
Dual polarity single output C band extended.
144
Catalogue 106
F/D range:
.33–.45
Return Loss:
18dB typical
C band scalar Feed Horn.
CFH-04
F/D range:
.33–.45
Return Loss:
18dB typical
C band scalar Feed Horn. Motorised polariser (H V and
skew) and Dielectric Insert (circular polarities) included.
Satellite Equipment
SATELLITE HARDWARE
SATFM
Flexi Mount. Roof mount with stay bars that adjust
in length between .8 and 1.4 metres, to suit your
job. Fixing kit includes self tapping screws to
lock stay bars, metal roof screws and weather
proofing washers. Stay bars shown at minimum
length and without locking screws.
EZYGMOUNT
45mmØ rigid dish mount. Stands 600mm from
gutter, rafter fixing. Ships with screw kit and
instructions. 900mm EZY-G/MOUNT-L available
to order.
HDT1500
Universal Satellite Mount for wall and roof.
SJMM
Improved complete DiSEqC positioner. Interprets
DiSEqC 1.2 instructions to position any dish up
to 1.2m in diameter. H to H mount with high
resolution hall effect sensor. Manual East West
buttons simplify set up.
Connects directly between DiSEqC 1.2 receiver
(or optional interface Vbox) and LNB. Up to
75mmØ mount, 55mmØ dish mount.
SATWM
Wall Mount. Mounts on timber, brick, concrete
or almost any vertical wall surface with sleeve
anchors or coach screws etc. (not included).
Simple yet extremely functional for dishes up
to 90cm.
SATGM
Single leg Satellite Gutter Mount.
SJA
24 inch (61cm) stroke length Linear Actuator
with Reed Sensor. Works with SJVB or analogue
positioner interfaces to reliably move a bigger
dish across your sky.
SJVB
DiSEqC positioner interface box. Enables any
DiSEqC 1.2 equipped receiver to control a bigger
dish using a Linear Actuator. Stores up to 48
positions. Dishes easily fine tuned. Software and
hardware dish travel limits. Mains powered, 36V
DC @ 90W max. output, overload protected.
Catalogue 106
145
Satellite Equipment
SATELLITE ACCESSORIES
Satellite Finder
Angle Finder
S
SF96C
Perfect for the Caravaner!
• Attached compass to accurately pinpoint direction
• Electronic Buzzer for audible tone
INC01
Locate your satellite
atellite by inclination
incli
angle. Each
satellite slot has a different elevation. Once
known you can’t miss! Magnetic
M
base helps
Angle Finder stay on your feed arm.
Use in conjunction with SF96C.
• Backlight enables use in low light
• Gain adjustable for accurate readings
• Horizontal / Vertical and 22KHz LED indicators
• Measures 950–2250MHz
• Line Powered, so no batteries to replace
AIP12W
DSQ4B
Indoor 4 way DiSEqC switch.
DSQ4W
Outdoor 4 way DiSEqC switch.
Power
er inserter for twin LNBs. Two inputs 1x
Vertical,
cal 1x Horizontal.
Horizontal Internal regulators for 13/18
13/
volts. 24VDC switchmode power supply included.
Caravan Satellite TV Kit
PI2G
Inserts (or removes) power from coax feed line.
5-2,400MHz, low loss, F type Female connectors
for both RF and low voltage connections.
Optus Aurora Card
Receive clear pictures anywhere in
Australia. Heavy duty dish, LNB, folding
tripod mount and cabling — with SQ701
KITVASTCARAVAN
signal quality meter, for fast satellite
alignment. Suitable for VAST, Aurora, or
FTA. Receiver supplied separately.
See Section 9 for satellite receivers.
146
Catalogue 106
This card is used with an
Irdeto embedded receiver to
receive Australian programs in
black spot areas on the Optus
Aurora platform.
Prior to switch-over, access
to Aurora is requirement to
qualify for VAST.
9
Contents
Receivers
Terrestrial Television Receivers
VAST High Definition Satellite Receivers
High Definition Digital Television Receivers 148–150
Cable/QAM Television Receiver
High Television Twin Tuner 500GB Digital Television
Recorder
150
QAM Digital Cable Receiver With Irdeto Security
Embedded
151
Satellite & VAST Television Receivers
Portable High Definition LCD Telvision/Monitor 152
Free To Air Satellite Receiver
151
151
Catalogue 106
147
Receivers
TERRESTRIAL TELEVISION RECEIVERS
HHT640
NEW!
A ‘micro’ HD digital television tuner module with integrated
HDMI connector and a USB2.0 port for recording, time shift and
media file playback.
The healing HHH640 is hidden and plugs directly into a TV
HDMI input (AV output also included); or directly to HDMI
input of a amplifier/receiver—even a projector. Includes a
remote control unit and extender. Improved file compatibility,
transparent to NTFS or FAT32 HDD format.
• HDMI output plug for direct screen connection
• Games, Calendar, Calculator functions
• Rotating HDMI plug assists total receiver concealment
• Receives all ‘freeview’ Channels
• ‘Micro’ Case Design: only 145mm x 65mm x 23mm
• Centre Cut option: displays 16:9 on 4:3 screens
• IR Receiver extension (included) makes the receiver
even easier to conceal
• Manual and Auto Scan Modes,
supports Logical Channel Numbering
• HDMI, Composite (CVBS) Video and Audio outputs
included
• Parental Control can supervise program availability by
broadcasters program ratings
• Record and TimeShift live TV on your USB storage device
• Signal Strength and Quality bars colour coded
• Flexible Media Player, plays: .dat, .mpg, .mpeg, .ts, .mp4,
.divx, .avi, .mjpg, .mp3, .aac, .wma, .ac3 files and more
• 7 Day Electronic Program Guide (EPG)
with 8th day cross over
• Excellent High Definition & Standard Definition
‘Wide Horizon’ picture quality
• Closed Caption (CC) Subtitle function embedded
• Resolutions 1920x1080i, 1280x720p, 720x576i, and 720x576p
• Low Energy Consumption — MEPS compliant
uses less than 1W on Standby
Low Cost!
HHT650
NEW!
High Definition Digital TV receiver with a USB2.0 port for
recording, time shift and media file playback of movie, photo
and music files. Improved file compatibility, transparent to NTFS
or FAT32 HDD format.
• HDMI, Component (Y Pb Pr) and Composite (CVBS)
outputs included
• Left, Right and Coaxial Audio outputs
• Record and TimeShift live TV on your USB storage device
• Flexible Media Player, plays: .dat, .mpg, .mpeg, .ts, .mp4,
.divx, .avi, .mjpg, .mp3, .aac, .wma, .ac3 files and more
• Stores up to 400 favourite TV and Radio channels
• Excellent High Definition & Standard Definition
‘Wide Horizon’ picture quality
• Resolutions 1920x1080i, 1280x720p, 720x576i and 720x576p
• Games, Calendar and Calculator functions
• Receives all ‘freeview’ Channels
148
Catalogue 106
• Centre Cut option: displays 16:9 on 4:3 screens
• Manual and Auto Scan Modes, supports Logical Channel
Numbering
• Parental Control can supervise program availability by
broadcasters program ratings
• Signal Strength and Quality bars colour coded
• 7 Day Electronic Program Guide (EPG) with 8th day cross
over
• Closed Caption (CC) Subtitle function embedded
• Low Energy Consumption — MEPS compliant uses less than
1W on Standby
• Compact Case Design: W 220mm x D 155mm x H 42mm
Receivers
Recorder Ready
HHT896
• Full USB Recorder function with time shift
• Resolutions: 1920 x 1080i, 1280 x 720p, 720 x 576p and
720 x 576i
• HDMI, Component Y/Pb/Pr and Composite CVBS
Video outputs
• 7 day Electronic Program Guide (EPG) with 8th day
cross over
• Full Closed Caption and Teletext functions embedded
• Automatically updates broadcaster program changes
• Centre Cut option displays 16/9 on 4/3 screens
receives all
freeview
channels
• Signal Strength and Quality bars colour coded
• Stores up to 1000 TV and Radio channels
• Saves program parameters at Power Fail
High Definition Digital TV receiver with all AV outputs active
simultaneously. Full USB Recorder with TimeShift and powerful
Media Player.
• All Video outputs active simultaneously
• Compact case less than 220mm wide
• Outstanding HD picture quality
• Optical Digital Audio SP/DIF output
• Receives all freeview channels.
Built-In Modulator
for Older TVs
• UHF RF Modulator - our first HD receiver to feature this
• Full USB Recorder function with time shift
• Resolutions: 1920 x 1080i, 1280 x 720p, 720 x 576p and
720 x 576i
• HDMI, Component Y/Pb/Pr and Composite CVBS
Video outputs
• 7 day Electronic Program Guide (EPG) with 8th day
cross over
• Full Closed Caption and Teletext functions embedded
HHT895
• Automatically updates broadcaster program changes
• Centre Cut option displays 16/9 on 4/3 screens
• Signal Strength and Quality bars colour coded
receives all
freeview
channels
• Stores up to 1000 TV and Radio channels
• Saves program parameters at Power Fail
• All Video outputs active simultaneously
High Definition Digital TV receiver with all AV outputs active
simultaneously. Includes a UHF RF Modulator for easy
connection to older televisions.
• Compact case less than 220mm wide
• Outstanding HD picture quality
• Coaxial Digital Audio SP/DIF output
• Receives all freeview channels.
Catalogue 106
149
Receivers
Built-In Modulator
for Older TVs
HHM897
High Definition Digital TV receiver with an inbuilt RF Modulator
for connection to old televisions or use in MATV networks.
High Sensitivity Tuner with all AV outputs active simultaneously.
• Excellent High Definition & Standard Definition ‘Wide
Horizon’ picture quality
• High Sensitivity Tuner
• Receives all ‘freeview’ Channels
• Resolutions 1080i, 720p, 576i and 576p
• HDMI, YPbPr Component, S-Video Mini Din, and CVBS
Composite outputs active simultaneously
• Electronic Program Guide (EPG) with 8th day cross over
• Centre Cut option displays aspect of 16:9 on 4:3 screens
• Automatically updates broadcaster program changes
• Signal Strength and Quality bars colour coded
• Low Energy Consumption — MEPS compliant — <35 kWh
per year (based on 10 hours daily use)
• Saves program parameters at Power Fail
• Inbuilt RF Modulator (UHF 21–69) for connection to old
televisions that do not have video inputs
• Closed Caption subtitles
• Coaxial Digital Audio output
• Parental Lock
• Optical SPDIF Digital Audio output
• RS232 connector for software upgrades
• RCA Audio output
• Removable mains power lead
HIGH DEFINITION TWIN TUNER 500GB DIGITAL TELEVISION RECORDER
Fully Featured!
HHR787
receives all
freeview
channels
• Large capacity 500GB Hard Disk Drive inbuilt
• Silent and robust Hard Disk Drive
• USB2.0 external recording and playback
• Twin Tuner record 2 channels simultaneously
• Recording Modes; Manual, Timer and EPG
• USB 2.O Port for external file storage and
firmware upgrades
• 3D TV viewing, recording & playback on 3D capable TV
• High Definition & Standard Definition broadcast ready
• Video Formats 1080i, 720p and 576i
• Recording Timers; Once, Daily and Weekly
• HDMI, YPbPr Component, S-Video and CVBS
Composite outputs
• Electronic Program Guide 7 days plus
• All outputs active simultaneously
• Record Selection from Electronic Program Guide
• Coaxial Digital and Optical SPDIF Audio output
• Skip/Play/Forward in 30 second or back in -15 second
steps
• Seek Play starts Playback at a designated time in
a recording
• RCA L & R Audio outputs x 2
• Bookmark Editing removes sections from a recording
• Receives all freeview channels.
• TimeShift enables you to Pause and Rewind live TV
150
Catalogue 106
• Learning Remote Control included
• Dual Power operates from 12 volt or 240 volt
Receivers
SATELLITE & VAST TELEVISION RECEIVERS
FREE TO AIR SATELLITE RECEIVER
Built-In Modulator
for Older TVs
VAST HD SATELLITE RECEIVERS
USB Recorder
Now Available
DSD4121 & DSD4121PVRREADY
HSS852
High definition satellite receivers specifically designed for the
Australian VAST Satellite TV service. Suitable for regional and
remote areas and receives all freeview channels. Also ideal for
caravans and motor homes.
• Satellite free to air TV and Radio receiver
Model DSD4121PVRREADY enables TV program recording
by connecting your hard drive via the units USB2.0 port and
includes a new design PVR remote control.
• USB Recorder with Time Shift
• STi7111 Secure Silicon core
• Plays recordings, jpeg and mp3 files
• MPEG-2/4 HD compliant
• 10 recording timers with 3 modes: Daily / Weekly / Once
• DVB-S2 Front end
• Inbuilt RF Modulator connects to all TV’s including old TV’s
without video inputs
• F-Type Satellite input
• Scart connector with component video
• RCA connector for composite video
• Digital coaxial SPDIF audio
• IRDETO secure silicon conditional access
• 450 MHz core processor
• Over-the-Air secure software download
• HDMI output
• Parental Lock
• EPG: Electronic Program Guide
• Network channel scan with automatic and manual
options as well as blind scan
• Conforms to MEPS: Low energy consumption
• Component video output
• Coaxial S/PDIF digital audio output
• Dolby digital audio
• Subtitles
• Stereo audio outputs
• USB 2.0 interface (a function of the DSD4121PVRREADY)
• 8 Day electronic program guide
• Compliant with Australian VAST services
QAM DIGITAL CABLE RECEIVER WITH IRDETO SECURITY EMBEDDED
• On Screen Display with multiple language options
• Mail and Message functions where broadcast
HSC870
• Auto update of Service Information available
• Demodulates 256, 128, 64, 32 and 16 QAM
• Electronic Program Guide (EPG) function
• Saves parameters if mains disconnected
• Live software upgrade via RS232
• Easy access to multiple broadcasters
• 4:3 and 16:9 Aspect Ratios selectable
• Composite CVBS and S-Video Outputs
HSC870 is a high performance QAM digital cable receiver that
receives multiple Satellite QPSK and even OFDM multiplexes
distributed over older 1 wire CATV MATV equipment (between
VHF and UHF), where QAM transmodulators are installed.
• Digital and dual Analogue Audio Outputs
• Last channel saved at power-off
• Stores up to 1000 channels
Catalogue 106
151
Receivers
PORTABLE HIGH DEFINITION LCD TELEVISION/MONITOR
HDT509
09
Coming Soon!
healing HDT509 is a new 9” (23cm) Portable HD Television and Monitor, with MPEG4 USB Recorder and Media Player. An internal
rechargeable battery provides up to 2 hours of continuous independent viewing. It operates from its internal Lithium-ion battery,
mains charger or 12V DC.
The whip antenna makes it a high quality digital TV solution that is wireless in every sense. Viewing is possible even in difficult
reception areas with an optional pre-amplified antenna, as 5V DC is available to the Antenna jack.
Most Media files can be played directly from a USB storage device, and it will power an expansion portable HDD via the USB2 port.
You can share sound through the internal speakers, or enjoy it personally through the 3.5mm headphone jack. AV Input and
Output are provided, along with a 3.5mm to RCA lead for connecting external devices.
A robust universal stand permits fitting on almost any stable surface, and has provision for permanent screwed fixing, say under a
cupboard as a kitchen TV.
Less than 24mm deep, healing HDT509 weighs no more than 650grams. Receiving all ‘freeview’ channels, it could be the best
investment in personal entertainment you will make.
152
Catalogue 106
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising