Intel Solid-State Drive Pro 1500 Series (2.5-inch) Product Specification

Intel Solid-State Drive Pro 1500 Series (2.5-inch) Product Specification
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Intel® Solid-State Drive Pro 1500 Series
(2.5-inch)
Product Specification


Capacities: 80 GB, 120 GB, 180 GB, 240 GB,
360 GB, 480 GB

Power
− Active (BAPCo MobileMark* 2007
Workload): 195 mW
− Idle4: 125 mW
− DevSleep: 5 mW

Temperature
o
o
− Operating5: 0 C to 70 C
o
o
− Non-Operating: -55 C to 95 C

Reliability
— Uncorrectable Bit Error Rate (UBER):
<1 sector per 1016 bits read
— Mean Time Between Failure (MTBF):
1,200,000 hours
— Shock (operating and non-operating):
1,500 G/0.5 msec

Vibration
— Operating: 2.17 GRMS (5-700 Hz)
— Non-operating: 3.13 GRMS (5-800 Hz)

Certifications and Declarations:
− UL*
− CE*
− C-Tick*
− BSMI*
− KCC*
− Microsoft* WHCK
− VCCI*
− SATA-IO*

Product Ecological Compliance
− RoHS*
®
Intel 20nm NAND Flash Memory
Multi-Level Cell (MLC)

Form Factors: 2.5 inch

Thickness: 7 mm

Weight: Up to 78 grams

SATA 6Gb/s Bandwidth Performance
(Iometer* Queue Depth 32)
− Sustained Sequential Read: up to 540 MB/s
− Sustained Sequential Write: up to 490
MB/s
1
Read and Write IOPS
(Iometer Queue Depth 32)
− Random 4 KB Reads: up to 41,000 IOPS
− Random 4 KB Writes: up to 80,000 IOPS2

Power Management
− 5.0 V SATA Supply Rail
− SATA Link Power Management (LPM)
− Device Sleep (DevSleep)
Components:
−
−


1
Latency (average sequential)
− Read: 80 µs (TYP)
− Write: 85 µs (TYP)

Data Compression

AES 256-bit Encryption

End-to-End Data Protection

Compatibility
− TCG* Opal Security Subsystem Class (SSC)
Specification Version 1.03
− Intel® Core™ vPro™ Processor Enrichment
− Intel SCS 9.0
®
®
®
Data Migration Software
−
Intel SSD Toolbox with Intel
Optimizer
−
Intel
−
−
−
−
Intel Rapid Storage Technology
SATA Revision 3.0
ACS-2 (ATA/ATAPI Command Set 2)
SSD Enhanced SMART ATA feature set
®
NOTES:
1.
2.
3.
4.
5.
SSD
Performance values vary by capacity.
Random 4 KB writes measured using out-of-box SSD.
Opal available only on specific firmware SKUs. Contact your Intel representative for more info. ID
Device Word 48 bit 0 = 1 if Opal Ready.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the
system for maintaining proper device operating temperatures on heavier workloads.
October 2013
Order Number: 329389-003US
Product Specification
1
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Ordering Information
Contact your local Intel sales representative for ordering information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,
BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED
IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY
OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal
injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU
SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS,
OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE
ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR
DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR
WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the
absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future
definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The
information here is subject to change without notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to
deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained
by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature.html
Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel
components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate meet
IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the
environment.
No computer system can provide absolute security under all conditions. Built-in security features available on select Intel® Solid
State Drives may require additional software, hardware, services and/or an Internet connection. Results may vary depending upon
configuration. Consult your system manufacturer for more details.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2013 Intel Corporation. All rights reserved.
Product Specification
2
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Contents
Revision History .................................................................................................................... 4
1
Introduction ............................................................................................................... 5
1.1
1.2
Terminology ................................................................................................................. 7
Reference Documents .................................................................................................... 8
2
Product Specifications ................................................................................................ 9
2.1
2.2
2.3
2.4
2.5
2.6
Capacity ...................................................................................................................... 9
Performance ................................................................................................................. 9
Electrical Characteristics .............................................................................................. 10
Environmental Conditions............................................................................................. 11
Product Regulatory Compliance ..................................................................................... 12
Reliability ................................................................................................................... 13
3
Mechanical Information ........................................................................................... 14
4
Pin and Signal Descriptions ...................................................................................... 15
4.1
4.2
4.3
Pin Locations .............................................................................................................. 15
Signal Descriptions ...................................................................................................... 15
Device Sleep Feature ................................................................................................... 16
5
Supported Command Sets ........................................................................................ 17
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
ATA General Feature Command Set ...............................................................................
Power Management .....................................................................................................
Security Mode Feature Set ...........................................................................................
SMART Command Set ..................................................................................................
5.4.1
SMART Attributes ...........................................................................................
5.4.2
SMART Logs ..................................................................................................
Device Statistics .........................................................................................................
SMART Command Transport .........................................................................................
Data Set Management Command Set ............................................................................
Host Protected Area Command Set ................................................................................
48-Bit Address Command Set .......................................................................................
General Purpose Log Command Set ...............................................................................
Native Command Queuing ............................................................................................
Software Settings Preservation .....................................................................................
SATA Link Power Management (LPM) .............................................................................
6
Certifications and Declarations ................................................................................ 26
7
Appendix .................................................................................................................. 27
October 2013
Order Number: 329389-003US
17
18
18
18
20
22
23
23
23
23
24
24
24
24
24
Product Specification
3
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Revision History
Document
Number
Revision
Number
329389
001US
Initial release
329389
002US
Corrected 4K read specification
329389
003US
Added the 80 GB, 360 GB and 480 GB capacities
Product Specification
4
Description
Revision Date
August 2013
September 2013
October 2013
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
1
Introduction
This document describes the specifications and capabilities of the Intel® Solid-State Drive Pro 1500
Series (Intel® SSD Pro 1500 Series).
The Intel SSD Pro 1500 Series delivers the next generation storage solution with new low power
features to align with 2013 Ultrabook™ platform requirements. The next generation Intel SSD
continues to provide high performance expected for Serial Advanced Technology Attachment (SATA)based computers.
The industry-standard 2.5-inch form factor enables interchangeability with existing hard disk drives
(HDDs) and native SATA HDD drop-in replacement with the enhanced performance, reliability, and
ruggedness offered by an SSD.
The latest feature addition is the DevSleep functionality, a low power drive state controlled by the host
via the DevSleep pin. The drive will consume a mere 5 mW while in this state.
As compared to standard SATA HDDs, Intel SSD Pro 1500 Series offers these key features:
•
High I/O and throughput performance
•
Low power consumption
•
Increased system responsiveness
•
High reliability
•
Enhanced ruggedness
The Intel SSD Pro 1500 Series also offers additional key features such as:
•
Advanced Encryption Standard (AES) 256-bit Encryption
AES 256-bit encryption is an industry standard in data security, providing a hardware-based
mechanism for encryption and decryption of user data. Utilizing a 256-bit encryption key, AES
encryption—when combined with an ATA drive password—helps protect user data.
•
End-to-End Data Protection
End-to-end data protection helps protect data from being corrupted across the data path by using
cyclic redundancy check (CRC), parity, and error correction code (ECC) checks in the data path from
the host interface to the NAND, and back.
•
Data Compression
Data compression helps improve performance and endurance by automatically compressing
information sent to the SSD so that less data has to be processed and stored on the NAND. The
amount of data that can be compressed depends on the type of data.
•
TCG* Opal Security Subsystem Class (SSC) Specification Version 1.0 (Select firmware only)
Intel® SSD Pro 1500 Series self-encrypting drive capabilities are enhanced with Opal security storage
specifications. The TCG* Opal specification provides a secure boot capability (pre-boot authentication),
protection of user data, and administrative capabilities that help protect user data from compromise,
improving security of critical data on the move.
October 2013
Order Number: 329389-003US
Product Specification
5
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
•
Intel® Core™ vPro™ Processor Enrichment
Intel® SSD Pro 1500 Series is enhanced when coupled with Intel® Core™ vPro™ processors systems
and software. Offering unique manageability capabilities, IT can proactively manage the Intel® SSD
Pro1500 Series products and reduce operating costs while keeping their PCs running smoothly.
•
Intel® SIPP
Intel® SSD Pro series will be part of the Intel Stable Image Platform Program (SIPP). Intel® SIPP
aligns key Intel platform components, enabling a predictable transition from one technology
generation to the next. Enhancing software and hardware stability, Intel® SIPP targets zero changes
to key platform components and drivers for at least 15 months. Intel® SIPP delivers predictability and
reduces total cost of ownership.
Product Specification
6
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
1.1
Terminology
Table 1: Terminology
Term
Description
ATA
Advanced Technology Attachment
DAS
Device Activity Signal
DevSleep
Device Sleep, a new addition to the SATA specification
DIPM
Device Initiated Power Management
DMA
Direct Memory Access
EXT
Extended
FPDMA
First Party Direct Memory Access
GB
Gigabyte (1,000,000,000 bytes)
Note: The total usable capacity of the SSD may be less than the total physical
capacity because a small portion of the capacity is used for NAND flash
management and maintenance purposes.
HDD
Hard Disk Drive
HIPM
Host Initiated Power Management
I/O
Input/Output
IOPS
Input/Output Operations Per Second
KB
Kilobyte (1,024 bytes)
LBA
Logical Block Address
LPM
Link Power Management
MB
Megabyte (1,000,000 bytes)
MLC
Multi-level Cell
MTBF
Mean Time Between Failures
NCQ
Native Command Queuing
NOP
No Operation
Opal
A Trusted Computing Group standard that defines an interface for managing a SelfEncrypting Drive (SED).
PIO
Programmed Input/Output
RDT
Reliability Demonstration Test
RMS
Root Mean Squared
SATA
Serial Advanced Technology Attachment
SMART
Self-Monitoring, Analysis and Reporting Technology
SSD
Solid-State Drive
TYP
Typical
UBER
Uncorrectable Bit Error Rate
October 2013
Order Number: 329389-003US
Product Specification
7
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
1.2
Reference Documents
Table 2: Standard References
Date or Rev. #
May 2005
Title
Location
Dec 2008
SFF-8201, 2.5-inch drive form factor
SFF-8223, 2.5-inch Drive w/Serial Attachment
Connector
IEC 55022 Information Technology Equipment
— Radio disturbance Characteristics— Limits
and methods of measurement CISPR22:2008
(Modified)
VCCI
June 2009
RoHS
June 2009
Serial ATA Revision 3.0
http://www.sata-io.org/
August 2009
ACS-2 Specification
http://www.t13.org/
May 2006
Sept 2008
August 2010
Sept 2010
Product Specification
8
IEC 55024 Information Technology Equipment
— Immunity characteristics— Limits and
methods of measurement CISPR24:2010
Solid-State Drive (SSD) Requirements and
Endurance Test Method (JESD218)
http://www.sffcommittee.org/
http://www.sffcommittee.org/
http://www.iec.ch/
http://www.vcci.jp/vcci_e/
http://qdms.intel.com/
Click Search MDDS Database and search
for material description datasheet
http://www.iec.ch/
http://www.jedec.org/standardsdocuments/docs/jesd218/
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
2
Product Specifications
2.1
Capacity
Table 3: User Addressable Sectors
Capacity
Unformatted Capacity (Total User Addressable Sectors in LBA mode)
80 GB
120 GB
180 GB
240 GB
360 GB
480 GB
156,301,488
234,441,648
351,651,888
468,862,128
703,282,608
937,703,088
2.2
Performance
Table 4: Compressible Performance
Specification
Capacity
80 GB
120 GB
180 GB
240 GB
360 GB
480 GB
Note:
1.
2.
Random
4 KB Read
(up to)1
IOPS
24,000
24,000
41,000
41,000
45,000
48,000
Random
4 KB Write
(up to)2
IOPS
80,000
80,000
80,000
80,000
80,000
80,000
Random
4 KB Write
(TYP)1
IOPS
33,000
37,500
49,000
49,000
33,000
33,000
Sequential
128 KB Read1
Sequential
128 KB Write1
MB/s
540
540
540
540
540
540
MB/s
480
480
490
490
490
490
Performance measured using Iometer* with Queue Depth 32. Measurements are performed on 8 GB of
Logical Block Address (LBA) range on a full SSD.
Random 4 KB writes measured using out-of-box SSD.
Table 5: Incompressible Performance
Specification
Capacity
80 GB
120 GB
180 GB
240 GB
360 GB
480 GB
Note:
1.
Random
4 KB Read
(up to)1
IOPS
20,500
18,000
37,500
37,500
37,500
37,500
Random
4 KB Write
(up to)1
IOPS
13,000
15,000
17,000
23,000
10,000
13,000
Sequential
128 KB Read1
Sequential
128 KB Write1
MB/s
430
450
470
510
525
540
MB/s
100
130
170
230
240
300
Performance measured using Iometer* with Queue Depth 32
October 2013
Order Number: 329389-003US
Product Specification
9
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Table 6: Latency
Specification
Intel® SSD Pro 1500 Series
80 GB
120 GB
180 GB
1
Read
Write1
Power On To Ready2
Note:
1.
2.
2.3
240 GB
360 GB
480 GB
80 µs (TYP)
85 µs (TYP)
1 s (TYP)
Based on sequential 4 KB using Iometer with Queue Depth 1 workload with compressible (non-random)
data pattern. Write Cache enabled.
Power On To Ready time assumes proper shutdown
Electrical Characteristics
Table 7: Operating Voltage and Power Consumption
Electrical Characteristics
Value
80 GB
120 GB
180 GB
240 GB
Operating Voltage for 5 V (±5%)
Min
Max
Rise Time (Max/Min)
Fall Time (Max/Min)
Noise Tolerance
Min Off Time1
Power Consumption (TYP)
Active2
Idle3
DevSleep4
Thermal Power5
2.8 W
3.1 W
195 mW
125 mW
5 mW
3.7 W
4.5 W
Regulator Power6
3.4 W
3.4 W
4.0 W
Note:
1.
2.
3.
4.
5.
6.
360 GB
480 GB
4.5 W
4.5 W
5.0 W
5.0 W
4.75 V
5.25 V
100 ms / 0.1 ms
5 s / 1 ms
100 mV pp (10 Hz – 30 MHz)
1s
4.9 W
Minimum time from when power removed from drive (Vcc < 100 mV) to when power can be reapplied
to drive.
Active power measured during execution of MobileMark* 2007 with SATA Link Power Management
(LPM) enabled.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
Power consumption during DevSleep state.
Power measured during 128 kB sequential writes with Queue Depth 32 workload using 100 ms sample
period. This represents power that would be thermal load on system during heavy workloads.
Power measured during 128 kB sequential writes with Queue Depth 32 workload using 500 us sample
period. This represents power that system power supply would have to regulate for proper device
operation.
Product Specification
10
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
2.4
Environmental Conditions
Table 8: Temperature, Shock, Vibration
Electrical Characteristics
Case Temperature
Operating
Non-operating1
Temperature Gradient2
Operating
Non-operating
Humidity
Operating
Non-operating
Shock and Vibration
Shock3
Operating
Non-operating
Vibration4
Operating
Non-operating
Note:
1.
2.
3.
4.
Range
0º C - 70º C
-55º C - 95º C
30 (TYP) ºC/hr
30 (TYP) ºC/hr
5 – 95 %
5 – 95 %
Range
1,500 G (Max) at 0.5 msec
1,500 G (Max) at 0.5 msec
2.17 GRMS (5-700 Hz) Max
3.13 RMS (5-800 Hz) Max
Please contact your Intel representative for details on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specifications assume the SSD is mounted securely with the input vibration applied to the drivemounting screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using
peak acceleration and pulse width value.
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the
drive-mounting screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is
measured using G Root Mean Squared (GRMS) value.
October 2013
Order Number: 329389-003US
Product Specification
11
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
2.5
Product Regulatory Compliance
The Intel® SSD Pro 1500 Series meets or exceeds the regulatory or certification requirements in the
table below.
Table 9: Product Regulatory Compliance Specifications
Title
TITLE 47-Telecommunications CHAPTER
1— FEDERAL COMMUNMICATIONS
COMMISSION PART 15 — RADIO
FREQUENCY DEVICES
Description
Region For Which
Conformity
Declared
FCC Part 15B Class B
USA
CAN/CSA – CEI/IEC CISPR 22-10 (Ref.
CISPR 22:2008)
Canada
IEC 55024 Information Technology
Equipment — Immunity characteristics—
Limits and methods of measurement
CISPR24:2010
EN-55024: 2010 and its amendments
European Union
IEC 55022 Information Technology
Equipment — Radio disturbance
Characteristics— Limits and methods of
measurement CISPR22:2008 (Modified)
EN-55022: 2010 and its amendments
European Union
EN-60950-1 2nd Edition
Information Technology Equipment —
Safety — Part 1: General Requirements
USA/Canada
UL/CSA EN-60950-1 2nd Edition
Information Technology Equipment —
Safety — Part 1: General Requirements
USA/Canada
ICES-003, Issue 4 Interference-Causing
Equipment
Standard Digital Apparatus
Product Specification
12
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
2.6
Reliability
The Intel® SSD Pro 1500 Series meets or exceeds SSD endurance and data retention requirements as
specified in the JESD218 specification.
Table 10: Reliability Specifications
Parameter
Value
Uncorrectable Bit Error Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the specified
number of bits read. In the unlikely event of a non-recoverable read error, the
SSD will report it as a read failure to the host; the sector in error is considered
corrupt and is not returned to the host.
< 1 sector per 1016 bits read
Mean Time Between Failures (MTBF)
Mean Time Between Failures is estimated based on Telcordia*
methodology and demonstrated through Reliability Demonstration Test (RDT).
≥ 1.2 million hours
Minimum Useful Life/Endurance Rating
The SSD will have a minimum of five years of useful life under typical
client workloads with up to 20 GB of host writes per day.
Insertion Cycles
Maximum insertion/removal cycles on 2.5 inch port
2.7
5 years
250 insertion/removal cycles
Hot Plug Support
Hot Plug insertion and removal is supported in the presence of a proper connector and appropriate
operation system, as described in the SATA 3.0 specification.
This product supports asynchronous signal recovery and issues an unsolicited COMINIT when first
mated with a powered connector to guarantee reliable detection by a host system without hardware
device detection.
October 2013
Order Number: 329389-003US
Product Specification
13
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
3
Mechanical Information
The figure below shows the mechanical information for the full size 2.5 inch Intel® SSD Pro 1500
Series SSD. All dimensions are in millimeters.
Figure 1: Dimensions for Full Size 2.5 inch Drives
Product Specification
14
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
4
Pin and Signal Descriptions
4.1
Pin Locations
Figure 2: Layout of Signal and Power Segment Pins
4.2
Signal Descriptions
4.2.1
Connector Pin Signal Definitions
Table 11: Serial ATA Connector Pin Signal Definitions
Pin
Function
S1
Ground
S2
A+
S3
A-
S4
Ground
S5
B-
S6
B+
S7
Ground
Definition
1st mate
Differential signal pair A
1st mate
Differential signal pair B
Note:
1st mate
Key and spacing separate signal and power segments.
October 2013
Order Number: 329389-003US
Product Specification
15
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
4.2.2
Power Pin Signal Definitions
Table 12: Serial ATA Power Pin Definitions
Pin1
3.
4.
5.
6.
4.3
Definition
Mating Order
P12
V33
3.3 V Power; not used
2nd Mate
P22
V33
3.3 V Power; not used
2nd Mate
P32
DevSleep
Device Sleep Pin
1st Mate
P43,4
Ground
1st Mate
P53
Ground
1st Mate
P63
Ground
1st Mate
P73,5
V5
5 V Power
1st Mate
P83,5
V5
5 V Power
2nd Mate
P93,5
V5
5 V Power
2nd Mate
P103
Ground
P116
DAS
P123, 4
Notes:
1.
2.
Name
1st Mate
Device Activity Signal
2nd Mate
1st Mate
Ground
P132
V12
12 V Power; not used
1st Mate
P142
V12
12 V Power; not used
2nd Mate
P152
V12
12 V Power; not used
2nd Mate
All pins are in a single row, with a 1.27 mm (0.050-inch) pitch.
Pins P1, P2 and P3 are connected together; Pins P13, P14 and P15 are connected together. Although they are not
connected internally to the device, the host may apply voltage on these pins.
The mating sequence is:
• Ground pins P4-P6, P10, P12 and the 5V power pin P7.
• Signal pins and the rest of the 5V power pins P8-P9.
Ground connectors P4 and P12 may contact before the other 1st mate pins in both the power and signal connectors to
discharge ESD in a suitably configured backplane connector.
Power pins P7, P8, and P9 are internally connected to one another within the device.
The host may ground P11 if it is not used for Device Activity Signal (DAS).
Device Sleep Feature
Device Sleep (or DevSleep/DEVSLP) is the latest feature aligned with Intel® 4th Generation Core™based Ultrabook™. Ultrabook™ has stringent power requirements for SSDs and as such requires an
ability to put the drive in a low power state. Although Link Power Management allows some control
over power consumption, both methods still require the SATA link to remain online. The DevSleep pin
is an enable high pin which is pulled up by the drive.
Product Specification
16
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
5
Supported Command Sets
The Intel SSD Pro 1500 Series supports all mandatory Advanced Technology Attachment (ATA) and
Serial ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The
mandatory and optional commands are defined in this section.
5.1
ATA General Feature Command Set
General Feature command set (non-PACKET), which consists of:
− EXECUTE DEVICE DIAGNOSTIC
− FLUSH CACHE
− IDENTIFY DEVICE 1
− READ DMA
− READ SECTOR(S)
− READ VERIFY SECTOR(S)
− SEEK
− SET FEATURES
− WRITE DMA
− WRITE SECTOR(S)
− READ MULTIPLE
− SET MULTIPLE MODE
− WRITE MULTIPLE
The Intel
−
−
−
−
Note:
1.
SSD Pro 1500 Series also supports the following optional commands:
READ BUFFFER
WRITE BUFFER
NOP
DOWNLOAD MICROCODE
See the Appendix for details on the sector data returned after issuing an IDENTIFY DEVICE command.
October 2013
Order Number: 329389-003US
Product Specification
17
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
5.2
Power Management
The Intel SSD Pro 1500 Series supports several power management feature sets as defined by the
ATA specification: general Power Management feature set, Advanced Power Management feature set,
and Power-Up in Standby (PUIS) feature set.
The Advanced Power Management and PUIS features can be enabled or disabled using the SET
FEATURES command.
The Power Management feature set includes the following commands:
•
CHECK POWER MODE
•
IDLE
•
IDLE IMMEDIATE
•
SLEEP
•
STANDBY
•
STANDBY IMMEDIATE
5.3
Security Mode Feature Set
The Intel SSD Pro 1500 Series supports the ATA Security Feature Set, which consists of:
•
SECURITY SET PASSWORD
•
SECURITY UNLOCK
•
SECURITY ERASE PREPARE
•
SECURITY ERASE UNIT
o
Normal Mode – Full NAND erase of user available space and spare area
o
Enhanced Mode – Cryptographically erase data
•
SECURITY FREEZE LOCK
•
SECURITY DISABLE PASSWORD
Note: Security features disabled and not supported if Opal activated.
5.4
TCG Opal SSC Support
The Intel SSD Pro 1500 Series drive is a Self-Encrypting Drive (SED) that supports the TCG Opal SSC
Specification Version 1.0 Rev 3.0 mandatory commands along with the following features:
•
PSID (Physical presence Security ID) Revert for SSD Repurposing
•
AES mode: XTS-AES 256-bit
•
FIPS 197 certified
Once Opal is activated by user (Locking SP in “Manufactured” state), per Opal specification, ATA
Security Features are not supported by the drive. Word 82, bit 1 and Word 128, bit 0 will indicate no
support (bit = 0). Host should not attempt any ATA Security Features when Opal activated. Table 13
indicates changes in ID Device word values when Opal activated.
Product Specification
18
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Table 13: ID Device Changes with Opal Activation
Word
Description
Value (Opal
Deactivated)
Value (Opal
Activated)
82
Features/Command Sets Support(Bit 1 Security
Support)
746Bh
7469h
89
SECURITY ERASE UNIT Time
0002h
0000h
90
ENHANCED SECURITY ERASE UNIT Time
0001h
0000h
92
Master Password Revision Code
FFFEh
0000h
Security Status
0021h
0000h
128
5.5
SMART Command Set
The Intel SSD Pro 1500 Series supports the SMART command set, which consists of:
•
SMART READ DATA
•
SMART READ ATTRIBUTE THRESHOLDS
•
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
•
SMART SAVE ATTRIBUTE VALUES
•
SMART EXECUTE OFF-LINE IMMEDIATE
•
SMART READ LOG SECTOR
•
SMART WRITE LOG SECTOR
•
SMART ENABLE OPERATIONS
•
SMART DISABLE OPERATIONS
•
SMART RETURN STATUS
October 2013
Order Number: 329389-003US
Product Specification
19
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
5.5.1
SMART Attributes
Table 14 lists the SMART attributes supported by the Intel SSD Pro 1500 Series; Table 15 lists the
corresponding status flags and threshold settings.
Table 14: SMART Attributes
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
05h
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count).
1
1
0
0
1
0
0 (none)
09h
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
1
1
0
0
1
0
0 (none)
0Ch
Power Cycle Count
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
1
1
0
0
1
0
0 (none)
AAh
Available Reserved Space
1
1
0
0
1
1
10
ABh
Program Fail Count
The raw value of this attribute shows total
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
1
1
0
0
1
0
0 (none)
ACh
Erase Fail Count
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
1
1
0
0
1
0
0 (none)
AEh
Unexpected Power Loss
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
1
1
0
0
1
0
0 (none)
Product Specification
20
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
ID
B7h
B8h
BBh
BEh
C0h
C7h
E1h
E2h
E3h
E4h
E8h
Attribute
Status Flags
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0
1
1
0
0
1
1
90
SATA Downshift Count
The count of the number of times SATA
interface selected lower signaling rate due
to error.
End-to-End Error Detection Count
Reports number of errors encountered
during end-to-end error detection within the
SSD data path.
Uncorrectable Error Count
The raw value shows the count of errors that
could not be recovered using Error
Correction Code (ECC).
Temperature
Reports real-time temperature of drive as
measured by temperature sensor on drive PCB.
The normalized value reports the current
temperature value. The raw value shows current,
lifetime highest and lifetime lowest
temperatures. Byte 1:0 = current temp Celsius;
Byte 3:2 = lifetime highest temp Celsius; Byte
5:4 = lifetime lowest temp Celsius.
Power-Off Retract Count (Unsafe Shutdown
Count)
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device. An
unsafe shutdown occurs whenever the device is
powered off without STANDBY IMMEDIATE being
the last command.
CRC Error Count
The total number of encountered SATA interface
cyclic redundancy check (CRC) errors.
Host Writes
The raw value of this attribute reports the total
number of sectors written by the host system.
The raw value is increased by 1 for every 65,536
sectors (32MB) written by the host.
Timed Workload Media Wear
Measures the wear seen by the SSD (since reset
of the workload timer, attribute E4h), as a
percentage of the maximum rated cycles.
Timed Workload Host Read/Write Ratio
Shows the percentage of I/O operations that are
read operations (since reset of the workload
timer, attribute E4h).
Timed Workload Timer
Measures the elapsed time (number of minutes
since starting this workload timer).
Available Reserved Space
This attribute reports the number of reserve
blocks remaining. The normalized value begins at
100 (64h), which corresponds to 100 percent
October 2013
Order Number: 329389-003US
Threshold
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0(none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
1
10
Product Specification
21
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
ID
Attribute
Status Flags
availability of the reserved space. The threshold
value for this attribute is 10 percent availability.
Media Wearout Indicator
This attribute reports the number of cycles the
NAND media has undergone. The normalized value
declines linearly from 100 to 1 as the average
erase cycle count increases from 0 to the
maximum rated cycles.
Once the normalized value reaches 1, the number
will not decrease, although it is likely that
significant additional wear can be put on the
device.
Total LBAs Written
The raw value of this attribute reports the total
number of sectors written by the host system.
The raw value is increased by 1 for every 65,536
sectors (32MB) written by the host.
Total LBAs Read
The raw value of this attribute reports the total
number of sectors read by the host system. The
raw value is increased by 1 for every 65,536
sectors (32MB) read by the host.
Total NAND Writes
Raw value reports the number of writes to NAND
in 1 GB increments.
E9h
F1h
F2h
F9h
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
Table 15: SMART Attribute Status Flags
Status Flag
Description
SP
EC
ER
PE
Self-preserving attribute
Event count attribute
Error rate attribute
Performance attribute
OC
Online collection attribute
PW
Pre-fail warranty attribute
5.5.2
Value = 0
Value = 1
Not a self-preserving attribute
Not an event count attribute
Not an error rate attribute
Not a performance attribute
Collected only during offline
activity
Advisory
Self-preserving attribute
Event count attribute
Error rate attribute
Performance attribute
Collected during both
offline and online activity
Pre-fail
SMART Logs
The Intel SSD Pro 1500 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h.
The Intel SSD Pro 1500 Series implements host vendor specific logs (addresses 80h-9Fh) as read and
write scratchpads, where the default value is zero (0). Intel SSD Pro 1500 Series does not write any
specific values to these logs unless directed by the host through the appropriate commands.
The Intel SSD Pro 1500 Series also implements a device vendor specific log at address A9h as a readonly log area with a default value of zero (0).
Product Specification
22
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
5.6
Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the
Intel SSD Pro 1500 Series can be reported to the host on request through the Device Statistics log as
defined in the ATA specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is
accessible using READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
The table below lists the Device Statistics supported by the Intel SSD Pro 1500 Series.
Table 16: Device Statistics Log
Page
Offset
0x00
0x01 - General
Statistics
0x08
0x10
0x18
0x28
0x08
0x04 - General
Errors Statistics
0x10
0x06 Transport
Statistics
0x08
0x10
0x18
0x07 - Solid
State Device
Statistics
0x08
5.7
Description
List of Supported Pages
Power Cycle Count
Power-On Hours
Logical Sectors Written
Logical Sectors Read
Num Reported Uncorrectable
Errors
Num Resets Between
Command Acceptance and
Completion
Num Hardware Resets
Num ASR Events
Num Interface CRC Errors
Percentage Used Endurance
Indicator
Equivalent SMART attribute if applicable
0Ch
09h
E1h
F2h
BBh
E9h
This statistic counts up from 0 rather than down
from 100, and may go beyond 100 for drives that
exceed their expected lifetime.
SMART Command Transport
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive
status and data from an SSD using standard write/read commands to manipulate two SMART Logs:
•
Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
•
Log Address E1h ("SCT Data Transfer") — used to transport data
5.8
Data Set Management Command Set
The Intel SSD Pro 1500 Series supports the Data Set Management command set Trim attribute, which
consists of:
•
DATA SET MANAGEMENT
5.9
•
•
•
•
Host Protected Area Command Set
READ NATIVE MAX ADDRESS
SET MAX ADDRESS
READ NATIVE MAX ADDRESS EXT
SET MAX ADDRESS EXT
October 2013
Order Number: 329389-003US
Product Specification
23
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
5.10
48-Bit Address Command Set
The Intel SSD Pro 1500 Series supports the 48-bit Address command set, which consists of:
•
FLUSH CACHE EXT
•
READ DMA EXT
•
READ NATIVE MAX ADDRESS
•
READ NATIVE MAX ADDRESS EXT
•
READ SECTOR(S) EXT
•
READ VERIFY SECTOR(S) EXT
•
SET MAX ADDRESS EXT
•
WRITE DMA EXT
•
WRITE MULTIPLE EXT
•
WRITE SECTOR(S) EXT
5.11
General Purpose Log Command Set
The Intel SSD Pro 1500 Series supports the General Purpose Log command set, which consists of:
•
READ LOG EXT
•
WRITE LOG EXT
•
READ LOG DMA EXT
•
WRITE LOG DMA EXT
5.12
•
•
Native Command Queuing
READ FPDMA QUEUED
WRITE FPDMA QUEUED
5.13
Software Settings Preservation
The Intel SSD Pro 1500 Series supports the SET FEATURES parameter to enable/disable the
preservation of software settings.
5.14
SATA Link Power Management (LPM)
The Intel SSD Pro 1500 Series supports the SET FEATURES parameter to enable Device Initiated
Power Management (DIPM). The SSD also supports Host Initiated Power Management (HIPM).
Product Specification
24
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
5.15
DevSleep
The Intel SSD Pro 1500 Series supports the DevSleep feature. DevSleep must be enabled on the
device by the host system through the SET FEATURES command. If DevSleep is enabled by the host,
the host must drive the DevSleep signal to proper assert/de-assert voltage levels according to the
SATA specification. Entry into DevSleep must be preceded by LPM slumber entry by host and device.
The Intel SSD Pro 1500 Series also supports DevSleep_to_ReducedPwrState which allows host to
wake the drive using normal LPM COMWAKE out-of-band signaling.
For the Intel® SSD Pro 1500 Series, the total time to DevSleep for system active state is
recommended to be 6 sec. The AHCI controller has 4 parameters that need to be defined for proper
DevSleep operation between the host and drive. Table 17 defines those values for the Intel® SSD Pro
1500 Series drive.
Table 17: DevSleep Control Parameters
Parameter
Definition
DITO
DM
MDAT
DETO
Control
DevSleep Idle Time Out –
number of milliseconds prior to
host asserting DevSleep
DITO Multiplier – set once at
boot-up
Set by Host
Intel® SSD Pro 1500
Values
Active (lid-up): 375
Set by Host
15
Minimum Devsleep Assertion
Time – minimum time in
milliseconds for host to assert
devsleep
DevSleep Exit Time Out – max
time in milliseconds from when
DevSleep is negated to when
device ready to detect OOB
Reported by Drive
10
Reported by Drive
20
Total time to devsleep entry = DITO * (DM+1)
October 2013
Order Number: 329389-003US
Product Specification
25
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
6
Certifications and Declarations
The table below describes the Device Certifications supported by the Intel SSD Pro 1500 Series.
Table 18: Device Certifications and Declarations
Certification
CE Compliant
UL Certified
Description
European Economic Area (EEA): Compliance with the essential requirements of EC
Council Directives Low Voltage Directive (LVD) 2006/95/EC, EMC Directive
2004/108/EC and Directive 2011/65/EU.
Certified Underwriters Laboratories, Inc. Bi-National Component Recognition; UL
60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment - Safety - Part
1: General Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology
Equipment - Safety - Part 1: General Requirements)
C-Tick Compliant
Compliance with the Australia/New Zealand Standard AS/NZS3548 and
Electromagnetic Compatibility (EMC) Framework requirements of the Australian
Communication Authority (ACA).
BSMI Compliant
Compliance to the Taiwan EMC standard CNS 13438: Information technology
equipment - Radio disturbance Characteristics - limits and methods of measurement,
as amended on June 1, 2006, is harmonized with CISPR 22: 2005.04.
KCC
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility
Control Regulation and meets the Electromagnetic Compatibility (EMC) Framework
requirements of the Radio Research Laboratory (RRL) Ministry of Information and
Communication Republic of Korea.
Microsoft WHCK
Microsoft Windows Hardware Certification Kit
RoHS Compliant
Restriction of Hazardous Substance Directive
VCCI
Voluntary Control Council for Interface to cope with disturbance problems caused by
personal computers or facsimile.
SATA-IO
Indicates certified logo program from Serial ATA International Organization.
Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in
the final product. Intel components as well as purchased components on the finished
assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21
requirements. The replacement of halogenated flame retardants and/or PVC may not
be better for the environment.
Product Specification
26
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
7
Appendix
The table below describes the sector data returned from an identify device command
Table 19: Identify Device Returned Sector Data
Word
0
F = Fixed
V = Variable
X = Both
F
Default Value
(Opal Ready)
Description
0040h
General configuration bit-significant information
1
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
2
V
C837h
Specific configuration
3
X
0010h
Obsolete - Number of logical heads (16)
4-5
X
0h
Retired
6
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
7-8
V
0h
Reserved for assignment by the CompactFlash* Association
(CFA)
9
X
0h
Retired
10-19
F
varies
Serial number (20 ASCII characters)
20-21
X
0h
Retired
22
X
0h
Obsolete
23-26
F
varies
Firmware revision (8 ASCII characters)
27-46
F
varies
Model number (Intel® Solid-State Drive)
47
F
8010h
7:0—Maximum number of sectors transferred per interrupt
on multiple commands
48
F
4000h
Reserved
49
F
2F00h
Capabilities
50
F
4000h (4001h)
Capabilities
51-52
X
0h
Obsolete
53
F
0007h
Words 88 and 70:64 valid
54
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
55
X
0010h
Obsolete - Number of logical heads (16)
56
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
57-58
X
00FBFC10h
Obsolete
59
V
0110h
Number of sectors transferred per interrupt on multiple
commands
60-61
F
varies
Total number of user-addressable sectors
62
X
0h
Obsolete
63
F
0007h
Multi-word DMA modes supported/selected
64
F
0003h
PIO modes supported
65
F
0078h
Minimum multiword DMA transfer cycle time per word
66
F
0078h
Manufacturer’s recommended multiword DMA transfer cycle
time
67
F
0078h
Minimum PIO transfer cycle time without flow control
68
F
0078h
Minimum PIO transfer cycle time with IORDY flow control
69
F
4010h
Additional Supported
October 2013
Order Number: 329389-003US
Product Specification
27
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Word
70
F = Fixed
V = Variable
X = Both
F
Default Value
(Opal Ready)
Description
0h
Reserved
71-74
F
0h
Reserved for IDENTIFY PACKET DEVICE command
75
F
001Fh
Queue depth
76
F
270Eh
Serial ATA capabilities
77
F
0086h
Reserved for future Serial ATA definition
78
F
054Ch
Serial ATA features supported
79
V
0040h
Serial ATA features enabled
80
F
03FCh
Major version number
81
F
FFFFh
Minor version number
82
F
746Bh
Command set supported
83
F
7429h
Command sets supported
84
F
6163h
Command set/feature supported extension
85
V
7469h
Command set/feature enabled
86
V
B409h
Command set/feature enabled
87
V
6163h
Command set/feature default
88
V
407Fh
Ultra DMA Modes
89
F
0002h
Time required for security erase unit completion
90
F
0001h
Time required for enhanced security erase completion
91
V
00FEh
Current advanced power management value
92
V
FFFEh
Master Password Revision Code
Hardware reset result: the contents of bits (12:0) of this
word shall change only during the execution of a hardware
reset
Vendor’s recommended and actual acoustic management
value
93
F
0h
94
V
0h
95
F
0h
Stream minimum request size
96
V
0h
Streaming transfer time - DMA
97
V
0h
Streaming access latency - DMA and PIO
98-99
F
0h
Streaming performance granularity
100-103
V
varies
Maximum user LBA for 48-bit address feature set
104
V
0h
Streaming transfer time - PIO
105
F
0001h
Reserved
106
F
4000h (6003h)
Physical sector size / logical sector size
107
F
0h
Inter-seek delay for ISO-7779 acoustic testing in
microseconds
108-111
F
varies
Unique ID
112-115
F
0h
Reserved for world wide name extension to 128 bits
116
V
0h
Reserved for technical report
117-118
F
0h
Words per logical sector
119
F
401Ch
Supported settings
Product Specification
28
October 2013
Order Number: 329389-003US
Intel® Solid-State Drive Pro 1500 Series (2.5-inch)
Word
120
F = Fixed
V = Variable
X = Both
F
Default Value
(Opal Ready)
Description
401Ch
Command set/feature enabled/supported
121-126
F
0h
Reserved
127
F
0h
Removable Media Status Notification feature set support
128
V
0021h
Security status
129-159
X
varies
Vendor-specific
160
F
0h
CompactFlash Association (CFA) power mode 1
161-168
X
0h
Reserved for assignment by the CFA
169
X
0001h
Data set management Trim attribute support
170-173
F
0h
Additional Product Identifier
174-175
F
0h
Reserved
176-205
V
0h
Current media serial number
206
X
0025h
SCT Command Transport
207-208
X
0h
Reserved
209
X
4000h
Alignment of logical blocks within a physical block
210-211
X
0h
Write-Read-Verify Sector Count Mode 3 (DWord)
212-213
X
0h
Write-Read-Verify Sector Count Mode 2 (DWord)
214
X
0h
NV Cache Capabilities
215-216
X
0h
NV Cache Size in Logical Blocks (DWord)
217
X
0001h
Nominal media rotation rate
218
X
0h
Reserved
219
X
0h
NV Cache Options
220
X
0h
Write-Read-Verify feature set
221
X
0h
Reserved
222
X
103Fh
Transport major version number
223
X
0h
Transport minor version number
224-229
X
0h
Reserved
230-233
X
0h
Extended Number of User Addressable Sectors (QWord)
Minimum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
Maximum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
234
X
0002h
235
X
0400h
236-254
X
0h
Reserved
255
X
varies
Integrity word
Note:
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values
may change when media is removed or changed.
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the
device or the commands executed by the device.
X = F or V. The content of the word may be fixed or variable.
October 2013
Order Number: 329389-003US
Product Specification
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement