Datasheet [PDF:185.9KB]
UFH Series
HD/SD Down Converter with Video Distribution Amplifier
UFH-70DCMD
This is a down-converter and video distribution amplifier
used for monitoring applications and is available in a modular format for installation in a UFH frame. It can convert HDSDI signals into SD-SDI signals and analog signals or convert
SD-SDI signals into analog signals.
Features
n Down-conversion of HD-SDI signals into SD-SDI signals and analog signals (HD or SD)
n Conversion into any of four aspect ratios (4:3, 13:9, 14:9, 16:9, squeeze)
n Selection of analog signal output enabled (YPBPR, GBR, Y/C, composite signals)
n Sync output signals for monitoring supported
n Process control functions provided (video level, chroma level, chroma phase, setup/black level)
n Built-in cross color reduction circuit
n Selection of enhanced level enabled
n Provide 4-way distribution of HD/SD-SDI signals
Block Diagram
SD-SDI
(SD)
Y/C
HD-SDI
UFH-70DCMD
SD-SDI
Composite
YPBPR
GBR
(HD/SD)
*HD analog signals cannot be output when SD-SDI signals are input.
HD/SD-SDI IN
ACTIVE THRU
HD/SD-SDI OUT 1
HD/SD-SDI OUT 2
HD/SD-SDI OUT 3
HD/SD-SDI OUT 4
VIDEO
SD-SDI OUT 1
PROC
Video Level
Chroma Level
Chroma Phase
Setup/Black Level
DOWN
CONVERTER
FUNCTION
SD-SDI OUT 2
Aspect Convert
Enhance mode
Cross Color
ANALOG OUT 2
ANALOG OUT 1
ANALOG OUT 3
ANALOG OUT 4
UFH-70DCMD
Down
Converter
HD/SD-SDI
1 in
SD-SDI
2 out
Analog HD
out
Analog
Component/
Y/C / Composite
out
UFH-70DCMD Specifications
l Standard
HD: 1080/59.94i, 50i, 720/59.94p, 50p
SD: 525/60 (NTSC), 625/50 (PAL)
HD SDI: 1.5Gbps or SD SDI: 270Mbps, 75Ω, 1ea., BNC
HD SDI: 1.5Gbps or SD SDI: 270Mbps, 75Ω, 4ea., BNC (Active through)
SD SDI: 270Mbps, 75Ω, 2ea., BNC
Analog Output: Refer to below
GBR (HD) or YPBPR (HD) or GBR (SD) or Y/B-Y/R-Y (SD) or Y/C (SD) or Composite (SD) or 2-level sync or tri-level sync output
Y or Y/C or Composite: 1.0Vp-p, 75Ω / GBR: 1.0Vp-p, 75Ω (with sync) / PBPR or B-Y/R-Y: 0.7Vp-p, 75Ω /
2-level sync: 0.3Vp-p, 75Ω / tri-level sync: 0.6Vp-p, 75Ω, 4ea., BNC
Y: 10-bit, C: 10-bit
HD SDI Y: 74.25/1.001MHz or 74.25MHz, C: 37.125/1.001MHz or 37.125MHz
SD SDI Y: 13.5MHz, C: 6.75MHz
uVideo Level: Over ±3dB uChroma Level: Over ±3dB uHUE: ±30º uSetup / Black Level: ±15IRE
10ºC - 40ºC / 30% - 90% (no condensation)
Supply from UFH Frame, +24VDC / Approx. 10.8VA (10.8W) / Approx. 450mA
138.5 (W) x 400 (D) mm (Front board), 141 (W) x 101 (D) mm (Rear board) / Approx. 1.0kg
2 slot
Operation manual
l Video Input
l Video Output
l Quantization
l Sampling Frequency
l Process Control
l Temperature / Humidity
l Power / Consumption / Draw
l Dimensions / Weight
l Require Slot
l Accessories
UFH-70DCMD Front View
Analog Output Details
Input Signal
POWER INPUT
UNITY
PROCESS CONTROL
VIDEO LEVEL CHROMA LEVEL SETUP/BLACK CHROMA PHASE
FUNCTION
1 2 3 4 5 6 7 8
FILTER
2
1
ASPECT
3
14:9
4
UFH-70DCMD
4:3
16:9
SQUEEZE
OPERATE
UFH-70DCMD
UFH-70DCMD Rear View
HD-SDI
Y/G/C1
PB/B/C2
PR/R/C3
Y
SYNC/C4
C
HD/SD ANALOG OUT
1
HD/SD-SDI IN
2
3
4
HD/SD-SDI OUT
1
SD-SDI OUT
2
Analog Output Signal
HD/SD-SDI IN
SD-SDI
1
ANALOG OUT 1
Y (SD)
ANALOG OUT 2
B-Y (SD)
ANALOG OUT 3
R-Y (SD)
ANALOG OUT 4
Composite (SD)
2
G (SD)
B (SD)
R (SD)
Composite (SD)
3
G (SD)
B (SD)
R (SD)
Sync (SD)
4
-
Y (SD)
C (SD)
Composite (SD)
5
Composite (SD)
Composite (SD)
Composite (SD)
Composite (SD)
1
Y (HD)
PB (HD)
PR (HD)
Composite (SD)
2
3
G (HD)
G (HD)
B (HD)
B (HD)
R (HD)
R (HD)
Composite (SD)
Sync (HD)
4
Y (SD)
B-Y (SD)
R-Y (SD)
Composite (SD)
5
G (SD)
B (SD)
R (SD)
Composite (SD)
6
G (SD)
B (SD)
R (SD)
Sync (SD)
7
-
Y (SD)
C (SD)
Composite (SD)
8
Composite (SD)
Composite (SD)
Composite (SD)
Composite (SD)
UFH-70DCMD
UFH Frame Line-up
UFH-108A
UFH-112A
Holds up to 8 UFH modules
Holds up to 12 UFH modules
The UFH-108A frame can hold up to 8 UFH modules. It
features support for duplicate power supplies, and has
a compact size that is only 2U high. It also supports
installation of UFM series modules.
The UFH-112A frame can hold up to 12 UFH modules.
It features support for duplicate power supplies, and
has a compact size that is only 3U high. It also
supports installation of UFM series modules.
FOR-A COMPANY LIMITED
Head Office : 3-8-1 Ebisu, Shibuya-ku, Tokyo 150-0013, Japan
FOR-A America Corporate Office : 11125 Knott Ave., Suite #A, Cypress, CA 90630, U.S.A.
FOR-A America East Coast Office : 1065 Avenue of the Americas Suite #1701A New York,NY 10018, U.S.A.
FOR-A America Distribution & Service Center : 2400 N.E. Waldo Road, Gainesville, FL 32609, U.S.A.
FOR-A Corporation of Canada : 425 Queen St. W. #211, Toronto, Ontario M5V 2A5, CANADA
FOR-A UK Limited : UNIT C71, Barwell Business Park, Leatherhead Road, Chessington Surrey, KT9 2NY, U.K.
FOR-A Italia S.r.l. : Viale Europa 50 20093, Cologno Monzese (MI), Milan, ITALY
FOR-A Corporation of Korea : 801 Dangsan Bld., 53-1 Dangsan-Dong, Youngdeungpo-Gu, Seoul 150-800, Korea
Homepage:http://www.for-a.com/
+81 (0)3-3446-3936
+1 714-894-3311
+1 212-861-2758
+1 352-371-1505
+1 416-977-0343
+44 (0)20-8391-7979
+39 02-254-3635/6
+82 (0)2-2637-0761
Fax : +81 (0)3-3446-1470
Fax : +1 714-894-5399
Fax : +1 212-861-2793
Fax : +1 352-378-5320
Fax : +1 416-977-0657
Fax : +44 (0)20-8391-7978
Fax : +39 02-254-0477
Fax : +82 (0)2-2637-0760
© 2006 FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company, Ltd. Design and specifications subject to change without notice. Printed in Japan. 0603KM1A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement