Samsung 440 User guide

Samsung 440 User guide
u440 BMC Guide.book Page i Wednesday, October 8, 2008 10:34 AM
SCH-u440
P O R T A B L E T r i - M o d e
T E L E P H O N E
User Guide
Please read this manual before operating your phone,
and keep it for future reference.
BMC_UG_u440_10082008_D5
u440 BMC Guide.book Page ii Wednesday, October 8, 2008 10:34 AM
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating thereto (the
“Phone System”), is proprietary to Samsung and protected under federal laws,
provincial laws, and international treaty provisions. Intellectual Property includes,
but is not limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured
by the Intellectual Property. Moreover, you agree that you will not (and will not
attempt to) modify, prepare derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code from the software. No title
to or ownership in the Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Copyright
© 2008 Samsung Electronics Canada, Inc. SAMSUNG is a registered trademark of
Samsung Electronics Co., Ltd. and its related entities.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5,
107, 225; 5, 109, 390.
Printed in South Korea
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark of RSA Security, Inc.
Post-it® is a registered Trademark of Minnesota Mining and Manufacturing
Company AKA 3M CORPORATION DELAWARE.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Samsung Electronics Canada, Inc. is under license. Other
trademarks and trade names are those of their respective owners.
u440 BMC Guide.book Page iii Wednesday, October 8, 2008 10:34 AM
Disclaimer of Warranties; Exclusion of Liability
Except as set forth in the express warranty contained on the warranty page enclosed
with the product, the purchaser takes the product "as is", and Samsung makes no
express or implied warranty of any kind whatsoever with respect to the product,
including but not limited to the merchantability of the product or its fitness for any
particular purpose or use; the design, condition or quality of the product; the
performance of the product; the workmanship of the product or the components
contained therein; or compliance of the product with the requirements of any law,
rule, specification or contract pertaining thereto. Nothing contained in the
instruction manual shall be construed to create an express or implied warranty of
any kind whatsoever with respect to the product. In addition, Samsung shall not be
liable for any damages of any kind resulting from the purchase or use of the product
or arising from the breach of the express warranty, including incidental, special or
consequential damages, or loss of anticipated profits or benefits.
Privacy
The privacy and copyright laws of Canada govern the disclosure, reproduction and
distribution of data, media and other content, including music and video content.
Certain activities, including downloads or transfer by any means (including, via
cable, Bluetooth® or otherwise) of such content may be an infringement of privacy
or copyright law. Neither Samsung Electronics Canada Inc. nor any of its affiliates
shall be liable or responsible for any data or content disclosed, reproduced,
downloaded or distributed by the user of this equipment.
Service Offering
Network services and capabilities described within this manual are subject to the
availability as provided by your service provider. Please consult your service
provider for the availability and specifics related to any network services or
capabilities.
u440 BMC Guide.book Page iv Wednesday, October 8, 2008 10:34 AM
u440 BMC Guide.book Page vi Wednesday, October 8, 2008 10:34 AM
Table of Contents
Getting Started............................................................................. 1
Open View of Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Closed View of Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Viewing the Display Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features of Your Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using Your Phone’s Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . 8
About Using a microSD Memory Card . . . . . . . . . . . . . . . . . . . . . . . . 12
Phone Basics ............................................................................. 13
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Responding to Call Waiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TTY Use With Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
19
20
20
21
21
22
Roaming .................................................................................... 23
Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting Your Phone’s System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Menus........................................................................................ 25
Menu Styles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Voice Service ............................................................................. 33
Activating Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Voice Service Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Web ........................................................................................... 39
The Wireless Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Messaging ................................................................................. 42
Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Picture Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Mobile Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
u440 BMC Guide.book Page vii Wednesday, October 8, 2008 10:34 AM
Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Contacts .................................................................................... 53
Finding Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a New Contact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speed Dial #s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Name Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
53
53
54
55
55
55
Tools.......................................................................................... 57
Using the Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Task List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Countdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mass Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memo Pad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Updating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
57
57
58
58
61
62
63
65
66
66
67
68
Call History ................................................................................ 69
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call History Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving a Phone Number From Call History. . . . . . . . . . . . . . . . . . . . .
Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . .
Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69
69
70
70
71
71
71
Music Player.............................................................................. 72
My downloads ........................................................................... 73
Ringers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Screen Savers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
u440 BMC Guide.book Page viii Wednesday, October 8, 2008 10:34 AM
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Camera ...................................................................................... 77
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Picture Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storing Pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Online Albums. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings and Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
77
78
80
80
82
83
84
Bluetooth ................................................................................... 86
Trusted Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Visibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select Device Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
86
87
87
88
88
88
Settings ..................................................................................... 89
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
89
93
96
96
97
97
98
Phone Security ........................................................................ 103
Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Special Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing Phone Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting Your Picture Account . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Default Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
103
103
105
106
106
107
107
Safety ...................................................................................... 109
Getting the Most Out of Your Reception . . . . . . . . . . . . . . . . . . . . . . 109
u440 BMC Guide.book Page ix Wednesday, October 8, 2008 10:34 AM
Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . .
Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Owner’s Record. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Guide Proprietary Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110
112
115
115
Manufacturer’s Warranty ......................................................... 116
Index........................................................................................ 119
u440 BMC Guide.book Page 1 Wednesday, October 8, 2008 10:34 AM
Getting Started
Getting Started
Open View of Phone
1. Earpiece
2. Signal Strength
Indicator
13. Battery Strength
Indicator
3. Main LCD
(Display)
4. Navigation Key
5. Softkey (Left)
6. MENU/OK
7. TALK Key
9. Softkey (Right)
10. BACK Key
11. END/POWER Key
8. Keypad
12. Microphone
Getting Started
1
u440 BMC Guide.book Page 2 Wednesday, October 8, 2008 10:34 AM
Closed View of Phone
14. Camera Lens
15. Volume
Button
18. Headset
Jack
19. Side
Camera
Button
16. Sub LCD
17. Charger/
Accessories
Jack
Key Functions
1. Earpiece: Allows you to hear the other caller and the different ring tones
and sounds offered by your phone.
2. Signal Strength Indicator: Displays the current signal strength.
3. Main LCD (Display): Displays all of the information needed to operate
your phone.
4. Navigation Key: Allows you to scroll through the phone menu options
and provides a shortcut to phone functions from standby mode.
5. Softkey (Left): Can be used in several different ways.
•
•
In standby mode, press to access the Web.
When using other features, such as the Web Browser, the Left softkey
performs a context-sensitive action. This action is shown in the bottom
left corner of the Main LCD.
6. MENU/OK: Can be used in several different ways.
•
In standby mode, press to access the Menu.
2 Getting Started
u440 BMC Guide.book Page 3 Wednesday, October 8, 2008 10:34 AM
•
7. Talk Key: Can be used in several different ways.
•
•
•
Allows you to place or receive a call.
In standby mode, press the key once to access the Recent Calls log.
If you press and hold the key down, you will initiate the Voice
Recognition feature.
8. Keypad: Use these keys to enter numbers, letters, and characters.
9. Softkey (Right): Can be used in several different ways.
•
•
In standby mode, press to access your Contacts.
When using other features, such as the Web Browser, the Right softkey
performs a context-sensitive action. This action is shown in the bottom
right corner of the Main LCD.
10. BACK Key: Deletes characters from the display when you are in text
entry mode. When in a menu, press to return to the previous menu.
11. END/POWER Key: Used in several different ways.
•
•
During a call, press to end the call.
•
When the phone is off or in standby mode, press and hold this key for a
few seconds to turn your phone On or Off.
•
When in the main menu, press to return the phone to standby mode
and cancel your input.
When you receive an incoming call, press to enter silent mode and
mute the ringer.
12. Microphone: Allows the other caller to hear you clearly when you are
speaking to them.
13. Battery Strength Indicator: Displays the current battery strength.
14. Camera Lens: Allows you to take pictures.
15. Volume Button: Can be used in several different ways.
•
Adjust the ringer volume in standby mode (with the flip open) or to
adjust the voice volume during a call.
•
•
Scroll up or down to navigate through the different menu options.
To mute the ringer during an incoming call, press the volume key up or
down.
Getting Started
3
Getting Started
OK
Press MENU
when navigating through a menu to accept the highlighted
choice in the menu.
u440 BMC Guide.book Page 4 Wednesday, October 8, 2008 10:34 AM
16. Sub LCD: Allows you to see caller information and the phone’s status
without opening the phone.
17. Charger/Accessories Jack: Used to connect any available accessory
cables to your phone.
18. Headset Jack: Allows the other caller to hear you clearly when you are
speaking to them.
19. Side Camera Button: Used to launch the integrated digital camera,
when the phone is open or closed.
Viewing the Display Screens
Your phone’s Main and Sub LCD display screens provide a wealth of information
about your phone’s status and options. This list identifies the symbols you’ll see on
your phone’s display screens:
Indicates that your web connection is active and data is being
transferred. Incoming voice calls go directly to voicemail. Outgoing
voice calls can be made, but the web connection will terminate.
Indicates that data is being transferred over the 1X network. The arrow
direction indicates whether the handset is sending or receiving data.
Indicates that your web connection is dormant.
Indicates that position location is active.
Indicates that position location is inactive.
Indicates that your phone is in web security mode.
T
Indicates that your phone is roaming.
Indicates that a Memory Card is inserted.
Indicates a missed call.
4 Getting Started
u440 BMC Guide.book Page 5 Wednesday, October 8, 2008 10:34 AM
Indicates that you have a picture message waiting.
Getting Started
Indicates that you have a text message waiting.
Indicates that you have voicemail waiting.
• Press and hold
1
to dial your Voicemail box.
Indicates that you have a missed scheduled appointment.
Indicates that you have a missed alarm.
Indicates that you have a new message waiting.
Indicates that the message is locked. A passcode must be entered
before the message can be opened. A locked message is not deleted
when erase all or auto delete are used.
Indicates that the TTY option is On.
Indicates that your phone is in vibrate all mode.
Indicates that your phone is set to ringer plus vibrate mode.
Indicates Ringer Off + Vibrate mode; the ringer is off and vibrate is on.
Indicates that the ringer is set at a level between 1-8 or that 1-Beep is
selected.
Indicates Silence All mode; all sound is turned off.
Indicates that an alarm is set on your phone.
Tells you a call is in progress.
Means there is no service, as your phone cannot find a signal.
Displays your current signal strength. When you are receiving
maximum signal strength, six bars are shown.
Getting Started
5
u440 BMC Guide.book Page 6 Wednesday, October 8, 2008 10:34 AM
Displays your current battery strength at full.
Displays your current battery strength when it is low.
Indicates Mute mode; the keypad turned off.
Indicates Mute mode; the microphone turned off.
Indicates Camera mode.
Indicates that the self-timer function is enabled. With the self timer
enabled, a set amount of time is required prior to taking a picture.
Indicates that the white balance has been set to Sunny. This is used for
taking pictures outdoors on bright sunny days.
Indicates that the white balance has been set to Cloudy. This is used for
taking pictures outdoors under cloudy conditions.
Indicates that the white balance has been set to Tungsten. This is used
for taking pictures indoors under normal lighting conditions.
Indicates that the white balance has been set to Fluorescent. This is
used for taking pictures indoors under fluorescent lighting conditions.
Indicates a voice memo is being recorded.
Indicates the key you must press to pause playback.
Indicates the key you must press to play.
Indicates that media has been uploaded to an online album or folder.
Indicates that media is pending upload to an online album or folder.
Indicates that there is a voice caption attached to an image.
6 Getting Started
u440 BMC Guide.book Page 7 Wednesday, October 8, 2008 10:34 AM
Indicates that Bluetooth technology is enabled.
Getting Started
Indicates that Bluetooth technology is connected.
Indicates that Bluetooth technology is hidden.
Features of Your Phone
Congratulations on the purchase of your Samsung SCH-u440 phone. This phone
is lightweight, easy-to-use, reliable, and offers many significant features and
service options:
• Dual-band/Tri-Mode capability provides access to other Digital Networks
where roaming agreements are established. See "Roaming" on page 23.
• Wireless WebTM provides access to the wireless Internet in digital mode.
See "Web" on page 39.
• Messaging provides quick and convenient text messaging capabilities. See
"Messaging" on page 42.
• Downloadable games, ringers, screen savers, and applications allow you to
turn down time into fun time and to personalize your phone. See "My
downloads" on page 73.
• The built-in organizer lets you schedule alerts to remind you of important
events. See "Calendar" on page 58.
• Six hundred phone numbers and each Contact entry can store up to six
phone numbers each. See "Contacts" on page 53.
• Music player. See "Music Player" on page 72.
• Hands-free interface using Voice Service. See "Voice Service" on page 33.
• 1.3 Megapixel Camera. See "Camera" on page 77.
• Advanced Speech Recognition. See "Voice Memo" on page 67.
• microSD™ Memory Card Slot. See "About Using a microSD Memory Card"
on page 12.
• The keypad lets you quickly type messages. See "Text Messaging" on page
42.
• Bluetooth® Wireless Technology. See "Bluetooth" on page 86.
• English or French Language Menus. See "Language" on page 93.
Getting Started
7
u440 BMC Guide.book Page 8 Wednesday, October 8, 2008 10:34 AM
Turning Your Phone On and Off
To turn your phone on:
• Press
to turn your phone on.
Once your phone is on, it automatically enters standby mode – the phone’s standby
mode. At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, the Power
Save mode is automatically activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone periodically searches for a signal without your
intervention. You can also initiate a search for service by pressing any key (when
your phone is turned on).
Tip: The Power Save mode helps to conserve battery power when you are in an
area without a signal.
To turn your phone off:
• Press and hold
for two seconds until you see the powering down
animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is charging).
Using Your Phone’s Battery and Charger
Battery Capacity
Your phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge
your battery before it is fully drained.
When the battery reaches a low capacity, the battery icon will blink, followed
eventually by an audible alert and then power off.
Note: Long backlight settings, searching for service, vibrate mode, playing games,
or using the web affect the battery’s talk and standby times.
Tip: Be sure to watch your phone’s battery level indicator and charge the battery
before it runs out of power.
8 Getting Started
u440 BMC Guide.book Page 9 Wednesday, October 8, 2008 10:34 AM
Installing or Removing the Battery
Getting Started
To install or remove the LiIon battery:
1. Make sure the power is off so that you don’t lose any stored numbers
or messages.
2. To remove the cover plate, push on the thumb tab and slide the cover
plate away from the handset.
• To remove the battery, pull the top of the battery away from the phone
(1) and disconnect it (2).
1
2
Getting Started
9
u440 BMC Guide.book Page 10 Wednesday, October 8, 2008 10:34 AM
• To insert the battery, insert the battery into the opening on the back of the
phone at an angle (1), making sure the metal contacts on the battery
connect with the matching connectors in the phone. Press down until the
battery snaps into place (2).
2
1
3. Replace the cover plate.
Charging the Battery
Your phone’s LiIon battery is rechargeable and should be charged as soon as
possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level becomes
too low, your phone automatically turns off and you lose all of the information you
10 Getting Started
u440 BMC Guide.book Page 11 Wednesday, October 8, 2008 10:34 AM
Always use a Samsung-approved desktop charger, travel adapter, or vehicle
power adapter to charge your battery.
Warning! FOR CONNECTION TO AN ELECTRICAL SUPPLY NOT LOCATED IN
NORTH AMERICA, YOU MUST USE AN ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. USE OF THE WRONG ADAPTER
COULD DAMAGE YOUR PHONE AND VOID YOUR WARRANTY.
IMPORTANT SAFETY INSTRUCTIONS - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTED IN A VERTICAL,
HORIZONTAL, OR FLOOR-MOUNTED POSITION.
It takes approximately 4 hours to fully recharge a completely drained standard
battery. With the Samsung approved LiIon battery, you can recharge the battery
before it drains completely.
An animated battery icon is displayed on both the Main LCD screen and the Sub
LCD screen. The icon indicates whether the battery is being charged or is fully
charged.
Incorrect
Correct
Getting Started
11
Getting Started
were working on. For a quick check of your phone’s battery level, glance at the
battery charge indicator located in the upper-right corner of either of your phone’s
display screens.
indicates that the battery is full. If the battery charge is
getting too low, the battery icon
blinks and the phone sounds a warning
tone. A “Low Battery Recharge Soon” message appears on the phone’s display
screen.
u440 BMC Guide.book Page 12 Wednesday, October 8, 2008 10:34 AM
About Using a microSD Memory Card
Your phone is capable of supporting a memory storage media known as a
microSDTM memory card. This card is the newest standard of flash memory
specifically designed for use with ultra-small mobile phones and other devices. It is
ideal for storing media-rich files such as music, videos, and photographs in your
phone. The maximum storage size for this media card is 2 GB.
Note: Compatibility with all high capacity microSD memory cards is not
guaranteed.
Installing the microSD Memory Card
To install the card:
1. Locate the memory slot on the left side of the phone and pull out and
turn the plastic cover.
2. Orient the microSD’s gold contact pins upward.
Correct
2
Incorrect
3. Carefully insert the microSD card into the opening and firmly push it in
until you hear a click, which indicates that the card is now securely
installed.
Note: To remove the card once it has been inserted, firmly push the end of the card
further into the phone and release—the card should pop out of the memory card
slot. If this does not work, repeat the process again.
4. With the card now securely installed, re-secure the plastic cover over
the microSD slot on the phone.
12 Getting Started
u440 BMC Guide.book Page 13 Wednesday, October 8, 2008 10:34 AM
Phone Basics
Displaying Your Phone Number
If you forget your phone number, your phone can remind you.
To display your phone number:
1. Press
MENU
OK
for Menu.
2. Select Settings > Phone Info > Phone Number.
Note: Menu items may be selected by highlighting them with the navigation key
and pressing MENU
OK . You can also press the number corresponding to the menu item
on your keypad.
Making and Answering Calls
Making Calls
Placing a call from your phone is as easy as making a call from any land-line
phone. Just enter the number and press
and you’re on your way to clear
calls.
To make a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while dialing, press
BACK to erase one digit at a time. Press and hold BACK to erase the
entire number.)
Tip: Based on the number entered, the phone will display the province or state
underneath the number dialed. This feature works for numbers in Canada and the
U.S.A. only. This can help you determine whether you are making a long distance
call. Toll free numbers are not location specific and no province or state name will
be displayed.
3. Press
to call.
Phone Basics
13
Phone Basics
Note: Your phone can display the various features and options in one of two
different menu styles, Style 1 and Style 2. By default, your phone is set to Style 1.
Style 2 uses a different coloring scheme for the top-level menus.
u440 BMC Guide.book Page 14 Wednesday, October 8, 2008 10:34 AM
4. Press
or close the phone when you are finished.
Tip: To redial your last recent call, press
twice.
You can also place calls from your phone using Voice Dial (page 33), Speed Dialing
numbers from your Contacts (page 18), or using your Call History listings (page
69).
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming calls go to
voicemail.)
2. Press
to answer an incoming call. (Depending on your phone’s
settings, you can also answer incoming calls by opening the phone or
by pressing any number key. See "Call Answer" on page 99 for more
information.)
Your phone notifies you of incoming calls in the following ways:
• The phone rings or vibrates (unless set to Silence All).
• The backlight illuminates.
• The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the Contacts entry’s
name is displayed. The caller’s phone number may also be displayed, if available.
The following options are also available to handle an incoming call:
• Press
or the volume key to quiet the ringer.
• Press the right softkey
to send the incoming call to your voicemail box.
Note: When your phone is off, incoming calls go to voicemail.
Ending a Call
To disconnect a call when you are finished:
• Close the phone or press
.
Missed Call Notification
When an incoming call is not answered, a Missed Call message is displayed on
your screen.
14 Phone Basics
u440 BMC Guide.book Page 15 Wednesday, October 8, 2008 10:34 AM
• To dial a missed call press
.
You can place calls to 911 (dial
and press
phone is locked or your account is restricted.
), even if your
Warning: After initiating a 911 call, you must end the call by pressing
.
This notifies the phone that the 911 call was terminated intentionally by the user.
No other calls can be made before terminating the 911 call.
Warning: You cannot make 911 calls when the phone is in airplane mode and the
icon "Phone Off" is displayed. Turn the phone back on by disabling airplane mode.
For more details, see "Accessibility" on page 97.
In-Call Options
During a call, use the left softkey
to Mute or UnMute your phone’s
microphone. Additional actions are available by pressing the right softkey
for
Options during a call. A list of options is displayed that allows you to perform
different actions during the course of a call. The following options are available: (To
select an option, press the corresponding keypad number or highlight the option
and press MENU
OK .)
• (1) Key Mute or Key UnMute: Allows you to mute or reactivate your phone’s
key tones.
• (2) Contact Details: Accesses information on the Contact if they are in your
phonebook.
• (3) 3-Way Call: Allows you to talk to two different people at the same time.
(For more information, see "Making a Three-Way Call" on page 21.)
• (4) Contacts: Accesses the Contacts menu options.
• (5) Voice Memo: Allows you to record the current conversation. (For more
information, see "Reviewing and Erasing Memos" on page 67.)
• (6) Phone Info: Displays the phone number, icon glossary, hardware/
software version, and system and technology being used.
• (7) Messaging: Allows you to use the messaging menu and to send text
messages.
Phone Basics
15
Phone Basics
Calling Emergency Numbers
u440 BMC Guide.book Page 16 Wednesday, October 8, 2008 10:34 AM
• (8) Call History: Checks your call log for Missed, Outgoing, and Incoming
calls. You can also erase the logs, see Recent Calls, and check Air Time
from this menu.
•
(9) Tools: Accesses the Tools menu options.
During a call, you can to route the device’s audio through the speaker or through
the earpiece by pressing the Speakerphone button on the keypad. You will see the
message “Speaker Mode ON”. To turn off the speaker phone, press the
Speakerphone button again. You will see the message “Speaker Mode OFF”.
WARNING: Because of higher volume levels, do not place the device near your ear
during speakerphone use.
End-of-Call Options
After receiving a call from or making a call to a phone number that is not in your
Contacts, the phone number and duration of the call are displayed. Press the right
softkey
for Options to delete the number or save the new number in your
Contacts. (See “Saving a Phone Number” below for more information.)
Tip: Press the left softkey
directly to that number.
for Send Msg to send a text or picture message
Note: The End-of-Call options are not displayed for calls identified as Unknown ID
or Restricted number.
Saving a Phone Number
Your phone can store up to 600 phone numbers. Contacts entries can store up to a
total of six phone numbers, and each entry’s name can contain up to 64 characters.
(For more information, see "Adding a New Contact" on page 53.)
To save a number from standby mode:
1. Enter a phone number and press
MENU
OK
.
2. Select New Entry. If your Contacts list is empty, skip this step and
proceed to step 3.
3. Select the Type using the navigation key and press
4. Enter the Name using the keypad and press
16 Phone Basics
MENU
OK
.
MENU
OK
.
u440 BMC Guide.book Page 17 Wednesday, October 8, 2008 10:34 AM
5. Press the left softkey
for Done.
Phone Basics
After you have saved the number, the new Contacts entry is displayed.
To find a phone number:
1. Enter three to four digits of the last four digits of a phone number,
press the right softkey
for Options, and select Find. (A list of
possible matches is displayed.)
2. Use your navigation key to display the desired entry.
3. To dial the number, highlight it and press the left softkey
for Call.
Dialing and Saving Phone Numbers With Pauses
You can dial or save phone numbers with pauses for use with automated systems,
such as voicemail or credit card billing numbers.
There are two types of pauses available on your phone:
• Hard Pause sends the next set of numbers when you press
.
• 2sec Pause automatically sends the next set of numbers after two seconds.
Note: You can have multiple pauses in a phone number and combine
2-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter a phone number from standby mode.
2. Press the right softkey
for Options and select Hard pause or 2sec
Pause. Hard pauses are displayed as a “P” and 2-second pauses as a
“T”.
3. Enter additional numbers.
4. Press
to dial the number.
— or—
Press the right softkey
for Options and select Save to save the
number in your Contacts.
When dialing a number with a hard pause, press
numbers.
to send the next set of
Abbreviated Dialing
Abbreviated dialing allows you to set a five or six-digit prefix for commonly used
phone numbers. When abbreviated dialing is On, you can enter the last four or five
Phone Basics
17
u440 BMC Guide.book Page 18 Wednesday, October 8, 2008 10:34 AM
digits of any phone number that only matches the five or six digit prefix. The
number is dialed using the prefix numbers plus the last four or five digits entered.
To set up abbreviated dialing:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Call Setup.
4. Select Abbrev. Dial.
5. Press the navigation key up or down to select On and press
6. Input the five or six digit prefix and press
MENU
OK
MENU
OK
.
to Save.
Making an Abbreviated Dial Call
To make a call:
1. Enter the last four or five digits of the prefix phone number.
2. Press
to make the call.
Dialing From Contacts
To dial directly from a Contacts entry:
1. Press the right softkey
for Contacts.
2. Enter the first few letters of the entry’s name to locate the desired entry.
-orScroll down to highlight the desired entry.
3. Press
to make the call.
Tip: If the desired entry contains more than one phone number, scroll left or right
to display the number you wish to call and press
to make the call.
Using One-Touch or Two-Touch Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory to make
contacting friends and family as easy as pressing a few buttons. With this feature,
you can dial Speed Dial entries using one key press for locations 2-9, and two key
presses for locations 10-99.
18 Phone Basics
u440 BMC Guide.book Page 19 Wednesday, October 8, 2008 10:34 AM
To use One-Touch Dialing for Speed Dial locations 2-9:
Phone Basics
• Press and hold the appropriate key for approximately two seconds. (The
display confirms that the number has been dialed when it shows “Speed
Dial # ...”.)
Note: Location 1 is reserved for voice mail and cannot be changed.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds. (The
display confirms that the number has been dialed when it shows
“Speed Dial # ...”.)
Entering Text
Selecting a Character Input Mode
Your phone provides convenient ways to enter words, letters, punctuation,
symbols, and numbers whenever you are prompted to enter text (for example,
when adding a Contacts entry or when sending text messages).
To change the character input mode:
1. When you display a screen where you can enter text, press the right
softkey
for Options.
2. Select Text Mode.
3. Select a character input mode:
• Alpha to enter characters by tapping the keypad (see page 20).
• Symbol to enter symbols (see page 20).
• Number to enter numbers (see page 20).
Entering Characters Using Alpha mode
To enter characters by tapping the keypad, select the Alpha mode (see “Selecting a
Character Input Mode” on page 19). Press the corresponding key repeatedly until
the desired character appears. When the Abc icon is shown, the first letter of the
first word is capitalized and the following letters are lowercase. Press
to cycle
between upper case (ABC), lower case (abc), or initial caps (Abc) for characters in
ABC mode.
6KLIW
Phone Basics
19
u440 BMC Guide.book Page 20 Wednesday, October 8, 2008 10:34 AM
To enter text using Alpha:
1. From a text entry screen (for example, when composing a text
message), press the right softkey
for Options, select Text Mode
and select Alpha.
2. Use your keypad to enter the contact's name.
After a character is entered, the cursor automatically advances to the next space
after two seconds or when you enter a character on a different key.
Entering Numbers and Symbols
To enter symbols:
• Select the Symbol mode. (See “Selecting a Character Input Mode” on page
19.) To enter a symbol, press the appropriate key indicated on the display.
Use the navigation key to scroll up or down to see additional symbols.
To enter numbers:
• Select the Number mode and press the appropriate key. (See “Selecting a
Character Input Mode” on page 19.)
Using Voicemail
All unanswered calls to your phone are automatically transferred to your voicemail,
even if your phone is in use or turned off. For information on configuring and
retrieving your voice mail, see "Voicemail" on page 46.
Using Caller ID
Caller ID allows people to identify a caller before answering the phone by displaying
the number of the incoming call. If you do not want your number displayed when
you make a call, just follow these easy steps.
To block your phone number from being displayed for a specific outgoing call:
1. Press *67.
2. Enter the number you want to call.
3. Press
.
To permanently block your number, call the Customer Service department of your
network service provider.
Note: If you have not subscribed to Caller ID, and the backlight is set to turn off
after a period of time, pressing
will switch the backlight back on. Either
press and hold
or press
twice to answer the second call when the
20 Phone Basics
u440 BMC Guide.book Page 21 Wednesday, October 8, 2008 10:34 AM
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you of incoming calls by sounding two
beeps. Your phone’s screen informs you that another call is coming in and
displays the caller’s phone number (if it is available and you are in digital mode).
To respond to an incoming call while you’re on a call:
• Press
. (This puts the first caller on hold and answers the second
call.)
To switch back to the first caller:
• Press
again.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same time. When using
this feature, the normal airtime rates will be charged for each of the two calls.
To make a Three-Way Call:
1. Enter a number you wish to call and press
.
2. Once you have established the connection, press the right softkey
for Options, followed by 3-Way Call.
3. Select Contacts or Recent List to retrieve a number from your phone,
or select Enter Phone# to type in a new number. Press
.
4. Press the right softkey for Join to dial the number.
5. When you’re connected to the second party, press
begin your three-way call.
again to
If one of the people you called hangs up during the call, you and the remaining
caller stay connected. If you initiated the call and are the first to hang up, all three
callers are disconnected.
Tip: You can also begin a Three-Way Call by displaying a phone number stored in
your Contacts, Call History, or Messaging. To call the third party, press
.
Note: Call Waiting and Three-Way Calling are not available while roaming off the
network.
Phone Basics
21
Phone Basics
LCD is turned off. To avoid this problem, set the backlight to "Flip open". For more
information, see "Changing the Backlight Time Length" on page 91.
u440 BMC Guide.book Page 22 Wednesday, October 8, 2008 10:34 AM
TTY Use With Handset
A TTY (also known as a TDD or Text Telephone), is a telecommunications device
that allows people who are deaf, hard of hearing, or have speech or language
disabilities to communicate by telephone.
Your phone is compatible with select TTY devices. Please check with the
manufacturer of your TTY device to ensure that it supports digital wireless
transmission. Your phone and TTY device will connect via a special cable that plugs
into your phone's headset jack. If this cable was not provided with your TTY device,
contact your TTY device manufacturer to purchase the connector cable.
To turn TTY Mode on or off:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Accessibility.
4. Select TTY Options. (A brief explanation of TTY will display.)
5. Press
MENU
OK
again to continue.
6. Press the navigation key up or down to select TTY Off or TTY On and
press MENU
to save and exit. When TTY is on, connect to your headset.
OK
Note: In TTY Mode when your headset is plugged in, your phone will display the
TTY access icon. If TTY mode is enabled, the headset cannot be used.
IMPORTANT 911 Emergency Calling: We recommend that TTY users make
emergency calls by other means, including Telecommunications Relay Services
(TRS), analog cellular, and land line communications. Wireless TTY calls to 911
may be corrupted when received by public safety answering points (PSAPs)
rendering some communications unintelligible. The problem encountered appears
related to TTY equipment or software used by PSAPs. This matter has been
brought to the attention of the FCC, and the wireless industry and PSAP community
are currently working to resolve it.
22 Phone Basics
u440 BMC Guide.book Page 23 Wednesday, October 8, 2008 10:34 AM
Roaming
Understanding Roaming
Roaming Indicator
Network
Other Digital Networks
Note: You will pay a higher per-minute rate for roaming calls.
Roaming on Other Digital Networks
When you’re roaming, your call quality and security will be similar to the quality
you receive when making calls on your home network. However, you might not be
able to access certain features, such as web services.
Note: If you are on a call when you leave the network and enter an area where
roaming is available, your call is dropped. If your call is dropped in an area where
you think service is available, turn your phone Off and On again to reconnect to the
network.
Setting Your Phone’s System
Your phone allows you to control your ability to roam. Using the Roaming menu
option, you can determine which signals your phone accepts.
Choose from three different settings on your phone to control your roaming
experience:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Roaming.
4. Select Set Mode.
Roaming
23
Roaming
Recognizing Icons on the Display Screen
Your phone’s display screen always lets you know when you’re off the network. The
following chart indicates what you’ll see depending on where you’re using your
phone.
u440 BMC Guide.book Page 24 Wednesday, October 8, 2008 10:34 AM
5. To select an option, highlight it and press
MENU
OK
.
• Automatic: This setting seeks service. When service is unavailable,
the phone searches for an alternate system.
• Home only: This setting allows you to access the home network only
preventing roaming on other networks.
24 Roaming
u440 BMC Guide.book Page 25 Wednesday, October 8, 2008 10:34 AM
Menus
Menu Styles
Menus
Your phone can display the various features and options in one of two different
menu styles:
Note: Key commands for the first menu level in the List style differ from those in
this guide. For more information on changing the menu style between the 3x3
Black style and the List style, see "Changing the Phone’s Menu Style" on page 25.
Style 1
Style 1 displays the first level menu choices with static graphical icons arranged in
a grid pattern. As you navigate through the menu, menu options are highlighted.
You can use the navigation key to scroll through menus quickly and easily.
• To navigate through a first level menu, simply press the navigation key in
the direction of your desired menu choice. The menu choice is highlighted.
Once the desired menu option is highlighted, press MENU
OK .
• You can also press the number corresponding to the menu choice.
For example, if you want to view your last incoming call:
1. Press
MENU
OK
2. Press
F
5
for Menu.
for Calls.
3. Select Recent Calls.
Style 2
Style 2 displays all of the menu choices in an identical format as Style 1, but in a
different color scheme.
Changing the Phone’s Menu Style
Your phone allows you to choose how the menu appears on your display screen.
To select the phone’s menu style:
1. Press
MENU
OK
for Menu.
2. Select Settings.
3. Select Display.
4. Select Menu Style.
5. Press the navigation key up or down to select Style 1 or Style 2 and
press MENU
to save and exit.
OK
Menus
25
u440 BMC Guide.book Page 26 Wednesday, October 8, 2008 10:34 AM
Backing Up Within a Menu
To go to the previous menu:
• Press
BACK .
To return to standby mode:
• Press
26 Menus
.
u440 BMC Guide.book Page 27 Wednesday, October 8, 2008 10:34 AM
Viewing the Menus
Menu Diagram
1: Web
2: Messaging
1: Send Message
1: Text
2: Pic Msg
2: Text Message
3: Pic Msg
1: Inbox
2: Sent Msg
3: Saved Msg
4: Pending
4: Instant Messaging
5: Personal Email
6: Mobile Email
7: Communities
• Facebook
8: Voicemail
1: Call Voicemail
2: Clear Envelope
3: Voicemail #
9: Settings
1: General
1: Notification
• Message & Icon
• Icon only
2: Message Alert
1: Volume
1: Voicemail
1: Use Ringer
Volume
2: Separate
Volume
2: Text Message
Menus
27
Menus
The following list outlines your phone’s
menu structure in Style 1 (3x3 grid):
1: Use Ringer
Volume
2: Separate
Volume
3: Pic Msg
1: Use Ringer
Volume
2: Separate
Volume
2: Type
1: Voicemail
2: Text Message
3: Pic Msg
3: Reminder
1: Off
2: Once
3: Every 2 min
3: Auto-Erase
• Yes
• No
2: Text Message
1: Save in Outbox
• Yes
• No
2: Priority
• Normal
• Urgent
3: Call Back #
1: None
2: Phone Number
(xxx-xxx-xxxx)
3: Custom
4: Edit Signature
• On
• Off
5: Preset Message
1: Can’t talk right now.
Send me a message.
2: Call me
u440 BMC Guide.book Page 28 Wednesday, October 8, 2008 10:34 AM
3: Where are you?
4: Can you pick up
5: Meet me at
6: Let’s get lunch.
7: The meeting has been
cancelled.
8: I’ll be there at
9: What time does it start?
10: I love you!
3: Alerts Setup
3: Contacts
• PhoneBook
• Add New
• Options
1: Speed Dial
2: My Name Card
3: Services
1: Dir Assist
2: Taxi
3: Caller Ring Tunes
4: Memory
• Backup
4: Tools
1: Alarm
1: Alarm #1
2: Alarm #2
3: Alarm #3
2: Bluetooth
1: Trusted Devices
2: Enable
• On
• Off
3: Visibility
• Always Visible
• Visible for 1min
• Hidden
4: Device Name
5: Device Info
6: Select Device Type
28
Menus
• HandsFree
• HeadSet
3: Calculator
4: Calendar
1: Today
2: Scheduler
3: Task List
4: Countdown
5: Mass Storage
1: Connect to PC
2: File Manager
3: Memory Info.
6: Memo Pad
7: World Time
8: Update Phone
1: Update Firmware
9: Voice Memo
1: Record
2: Review
3: Erase All
0:Voice Service
5: Calls
1: Recent Calls
2: Air Time
1: Last Call
2: Total Calls
6: Music Player
7: My Downloads
• Ringers
• Get New Ringers
• Screen Savers
• Get New Screen Savers
• Games
• Get New Games
• Applications
• Get New Applications
8: Camera
1: Camera
2: Pic Msg
u440 BMC Guide.book Page 29 Wednesday, October 8, 2008 10:34 AM
9: Settings
1: Display
1: Main Screen
1: Screen Saver
1: Preset Images
2: My Downloads
3: My Albums
2: Incoming Calls
1: With Caller ID
2: No Caller ID
3: Greeting
1: Default
2: Custom
2: Outer Screen
1: Screen Saver
3: Brightness
4: Backlight
• Flip open
• 30 seconds
• 15 seconds
• 8 seconds
5: Menu Style
• Style 1
• Style 2
6: Dialing Font
1: Color
• Basic
• Monochrome
• Hyphenate
2: Size
• Large
• Small
7: PowerSave Mode
• On
• Off
8: Keypad Light
• Flip open
• 30 seconds
• 15 seconds
• 8 seconds
• Off
9: Language
• English
• French
2: Sounds
1: Volume
1: Ringer
2: Earpiece
3: Headset
4: Speakerphone
5: Advanced
1: Alarms
2: App. Volume
1: Sound
2: Game Vibrate
3: Text Message
4: Pic Msg
5: Voicemail
2: Ringer Type
1: Voice Calls
1: With Caller ID
2: No Caller ID
2: Messages
1: Voicemail
2: Text Message
Menus
Menus
• Inbox
• Sent Msg
• Saved Msg
• Pending
3: My Pics
• In Phone
• Memory Card
• Online Albums
4: PictBridge
5: Settings and Info
1: Auto Save To
2: Status Bar
3: Account Info
29
u440 BMC Guide.book Page 30 Wednesday, October 8, 2008 10:34 AM
3: Pic Msg
3: Scheduler
4: Roam Ringer
• Normal
• Distinctive
3: Alerts
1: Minute Beep
2: Service
3: Connect
4: Sig. Fade Tone
5: Power On
6: Power Off
4: Key Tone
1: Tone Type
• Xylophone
• DTMF
• Voice
2: Key Tone Level
3: Tone Length
• Short
• Long
3: Messaging
1: Notification
• Message & Icon
• Icon only
2: Message Reminder
1: Off
2: Once
3: Every 2 min
3: Callback #
1: None
2: Phone Number
(xxx-xxx-xxxx)
3: Custom
4: Auto-Delete
5: Signature
• On
• Off
6: Draft Alert
30
Menus
• On
• Off
7: Priority
• Normal
• Urgent
4: Phone Info
1: Phone Number
2: Icon Glossary
3: Version
4: Advanced
5: Launch Pad
1: Up Key
• Messaging
• Send Message
• Voice Service
• Voice Memo
• Scheduler
• Alarms
• Calculator
• Display
• Ringer
• Calls
• Missed Alerts
2: Down Key (Options same as Up
key)
3: Left Key (Options same as Up
key)
4: Right Key (Options same as Up
key)
6: More...
1: Accessibility
1: TTY Options
• TTY Off
• TTY On
2: Voice Service
1: Confirmation
2: Adaptation
3: Modes
1: Expert Mode
u440 BMC Guide.book Page 31 Wednesday, October 8, 2008 10:34 AM
In-Call Options Menu
1: Key Mute/Key Unmute
2: Contacts
3: Messaging
4: 3-Way Call
5: Call History
6: Voice Memo
7: Tools
8: Phone Info
Camera Options Menu
When you are in Camera Preview
Mode, press the Options soft key to
access the following options:
1: Self Timer
1: Off
2: 5 Sec
3: 10 Sec
2: Fun Tools
• Fun Frames
• Color Tones
3: Controls
• Brightness
• White Balance
• Auto
• Sunny
• Cloudy
• Tungsten
• Fluorescent
• Night Shot
• Off
• On
• Metering
• Average
• Spot
4: Settings
• Resolution
• 1.3M
• High:640*480
• Med:320*240
• Low:220*176
• Quality
• Fine
• Normal
• Economy
• Shutter Sound
• Off
• Shutter 1-3
Menus
Menus
2: Prompt Mode
3: Readout Mode
4: About
2: Airplane Mode
• On
• Off
• On Power Up
3: Call Setup
1: Auto Answer
2: Abbrev. Dial
3: Call Answer
4: Contacts Match
4: Headset Mode
1: Turbo Button
2: Ringer Sound
5: Key Guard
1: Flip-closed
2: After 5 seconds
3: Off
6: Location
7: Roaming
1: Set Mode
2: Update PRL
8: Restrict and Lock
1: Voice
2: Camera/Pictures
3: Lock my Phone
9: Security
1: Change Lock
2: Special #
3: Erase
31
u440 BMC Guide.book Page 32 Wednesday, October 8, 2008 10:34 AM
• Say Cheese
• Status Bar
• Off
• On
• Storage
• Phone
• Card
5: Review Pictures
32 Menus
u440 BMC Guide.book Page 33 Wednesday, October 8, 2008 10:34 AM
Voice Service
Voice Service
Activating Voice Service
Voice recognition allows you to say commands to perform common functions
supported by your phone. There is no voice training required to use the voice
recognition feature. You simply say the pre-designated command displayed on
your screen in a normal tone of voice to perform the desired function.
To activate voice recognition:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Voice Service.
Tip: You can also activate Voice Service from standby mode by pressing and
holding the
key.
4. Wait for the beep and then say one of the following commands:
• Call
• Send Text
• Send Picture
• Lookup
• Go To
• Check
When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, it de-activates voice recognition without taking any action.
Note: If you want to use another button to activate voice recognition press MENU
for
OK
Menu, and select Settings > Launch Pad. Through this menu, you can change
button assignments, including the button used to launch "Voice Service", which is
the voice recognition application.
Using Voice Dial
Voice Dial allows you to dial any valid 7, 10, or 11 digit North American phone
number by speaking the number naturally, without pausing between the digits. It
also allows you to dial by pronouncing a name stored in your Contacts.
Voice Service
33
u440 BMC Guide.book Page 34 Wednesday, October 8, 2008 10:34 AM
Tips for using Voice Dial:
• Voice Dial works best in quieter environments.
• When saying a number, speak at a normal speed and say each digit clearly.
There is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six, seven, eight,
nine, zero, and oh. The phone does not recognize numbers such as "one
eight hundred" for "1-800." Instead, say "one-eight-zero-zero."
• The phone recognizes only valid 7, 10, or 11 digit North American phone
numbers.
To place a call using Voice Dial:
1. Activate voice recognition by pressing and holding
prompts you for a command.)
. (The phone
2. Say Call. (The phone prompts you to say the number or Contact name.)
3. Say either a name stored in your Contacts or a valid 7, 10, or 11 digit
North American phone number naturally and clearly.
4. If the phone asks you, "Did You Say", followed by the correct number,
say Yes. (You can also select the correct number from those displayed
on the screen by pressing MENU
on the correct number. The phone will
OK
then dial the number.)
5. If the phone asks you, "Did You Say", followed by an incorrect number,
say No. (If there are other alternatives, the phone will prompt you with
the next one.)
6. Alternatively, you can call a person in your Contacts by saying their full
name exactly as it is entered in your Contacts. (The phone plays the
name through the earpiece and displays it on the screen.)
• If you said a name listed in your Contacts that has more than one
number associated with it, the phone displays the different locations
(Home, Work, Mobile, Pager, Fax, and Others) and asks you which
one to dial. Say one of the location names and the phone will dial the
number for the specified location.
Note: In some cases, the phone might ask you to repeat a name or number. Make
sure that the number is a valid 7, 10, or 11 digit North American phone number,
and then say the number again. If the number isn't valid, or if the phone still
doesn't understand the number on the second try, it will not place a call.
34 Voice Service
u440 BMC Guide.book Page 35 Wednesday, October 8, 2008 10:34 AM
To send a text or picture message using Voice Dial:
. (The
2. Say Send Text or Send Picture. (The phone prompts you to say the
number or Contact name.)
3. Say either a name stored in your Contacts or a valid 7, 10, or 11 digit
North American phone number naturally and clearly.
4. If the phone asks you, "Did You Say", followed by the correct number,
say Yes. (You can also select the correct number from those displayed
on the screen by pressing MENU
on the correct number. )
OK
5. Follow the prompts to enter text (see "Text Messaging" on page 42) or
attach a picture (see "Picture Message" on page 44).
Using Name Lookup
Name Lookup lets you retrieve contact information for any person in your Contacts
by saying the full name of the person.
To retrieve information using Name Lookup:
1. Activate voice recognition by pressing and holding
will prompt you for a command.)
. (The phone
2. Say Lookup. (The phone will prompt you to say the name.)
3. Say the full name of the person, exactly as it is entered in your Contacts.
(The phone will play the name it recognized through the speaker, and
then open the contact information for that name.)
• If the phone says, "Did You Say", followed by an incorrect name, say
No. The phone then prompts you with the next name, if there is one. If
there are no more names, the phone will say "Sorry, No Match
Found".
Using Go To
The Go To option lets you activate a menu item, such as Messaging, on your phone
by saying the name.
To go to a menu using Voice Dial:
1. Activate voice recognition by pressing and holding
prompts you for a command.)
. (The phone
2. Say Go To. (The phone prompts you to say the menu.)
Voice Service
35
Voice Service
1. Activate voice recognition by pressing and holding
phone prompts you for a command.)
u440 BMC Guide.book Page 36 Wednesday, October 8, 2008 10:34 AM
3. Say the menu name naturally and clearly.
4. If the phone asks you, "Which Shortcut", followed by the correct menu,
say Yes. The phone will say “Opening...” and then display the menu.
Note: The next time you use voice dial to go to a menu, you can just say “Go to”
and then the name of the menu instead of waiting for the prompt. For example, you
can say “Go to Messaging”.
Phone Status Information
The Check option provides an update on your phone's service, signal strength, and
battery level.
To retrieve your phone's status information:
1. Press and hold
to activate voice recognition. (The phone
prompts you to say a voice command.)
2. Wait for the beep and say Check.
3. Say the item you want to check. Your phone’s current status information
is displayed.
Voice Service Settings
Voice Dial Confirmation
By default, your phone provides automatic voice confirmation to verify that the
correct number has been dialed. You can change these settings to Always Confirm
or Never Confirm.
To change voice dial prompts:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Accessibility.
4. Select Voice Service.
5. Select Confirmation.
6. Press the navigation key up or down to select Automatic, Always
Confirm, or Never Confirm, and press MENU
OK .
36 Voice Service
u440 BMC Guide.book Page 37 Wednesday, October 8, 2008 10:34 AM
Voice Adaptation
Voice Service
Voice calling is speaker-independent, which means that no initial training or
adaptation is required. Some users with heavy accents or unusual voice
characteristics may encounter difficulty in achieving high accuracy with speaker
independent Voice calling. The Adapt Voice feature allows users to dramatically
improve the digit accuracy through adaptation. Users who get acceptable digit
recognition accuracy will gain no additional benefit performing an adaptation.
After you adapt Voice Service, your phone will be customized to your voice. Other
people may not be able to use Voice Service on your phone accurately unless they
reset the phone to factory defaults.
Note: ONLY adapt Voice Service if the system is frequently mis-recognizing your
speech. You can always restore the system to its original factory setting.
Adaptation involves recording several word and digit sequences to teach the
system your voice. The adaptation process takes about 3 minutes.
Tips for adapting Voice Service:
• Perform the adaptation in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, but say each word/digit sequence naturally.
• If you make a mistake while recording a sequence of words/digits, or if
there is an unexpected noise that spoils the recording, you can wait for the
prompt to say “Please try again” to re-record the sequence.
To adapt Voice Service to your voice:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Accessibility.
4. Select Voice Service.
5. Select Adaptation.
6. Select Adapt Voice. The phone displays information about the Adapt
Voice feature.
7. When you are ready to start recording, press the left softkey
Start to begin.
Voice Service
for
37
u440 BMC Guide.book Page 38 Wednesday, October 8, 2008 10:34 AM
8. The phone displays the first sequence of words. Say the words using a
normal tone of voice. The phone then displays the next sequence of
words.
9. In total, there are 15 sets of words and/or digits. When you are finished
with a full session, you will reach a screen that reads, “Adapting...” and
then be returned to the Accessibility menu.
Note: It is recommended that you perform the complete adaptation of Voice
Service at least once to achieve the maximum benefit of this feature. If a partial
adaptation is performed, you can always return later and resume the process from
the half-way point.
Changing Voice Dial Prompts
By default, your phone provides audio prompts such as “Please say a command”.
You can change these prompts to Expert Mode, Prompt Mode, or Readout Mode.
To change voice dial prompts:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Accessibility.
4. Select Voice Service.
5. Select Modes.
6. Press the navigation key up or down to select Expert Mode, Prompt
Mode, or Readout Mode, and press MENU
OK .
38 Voice Service
u440 BMC Guide.book Page 39 Wednesday, October 8, 2008 10:34 AM
Web
The Wireless Web
Note: Rates and pricing vary according to your service plan. Please contact your
service provider for additional information.
Launching the Web
Note: The first time you use the Web, you will be prompted to go through a setup
process that takes approximately three minutes.
To launch a web connection:
1. Press
MENU
OK
for Menu.
2. Select Web.
3. You are connected to the home page provided by your service provider.
If you had a previous web connection, the last page you visited will be displayed
when you launch the web. When this occurs, you may not see the "Connecting
as..." message when you launch the session. Though the browser is open, you are
not currently in an active data session - that is, no data is being sent or received. As
soon as you navigate to another page, the active session will launch and you will
see the "Connecting" message.
Web Connection Status and Indicators
Your phone's display lets you know the current status of your web connection
through indicators which appear at the top of the screen. The following symbols
are used:
Web
39
Web
Your phone comes equipped with Wireless Web access. You can view specially
designed versions of popular sites including sports, weather, news, stock quotes
etc., as well as access downloadable ringtones, screensavers, and games. When
you launch the web, the phone will connect to the Internet and the service
indicator icon will display. Any time the service indicator icon is visible on the
display, you are connected to the Internet and will be invoiced accordingly.
u440 BMC Guide.book Page 40 Wednesday, October 8, 2008 10:34 AM
When your web connection is active (data is being transferred). Incoming
voice calls go directly to voicemail. Outgoing voice calls can be made but the
web connection will terminate.
When your web connection is dormant (no data is being sent or received).
Though not currently active, when dormant the phone can restart an active
connection quickly and voice calls can be made and received.
Navigating the Wireless Web
Navigating through menus and Web sites during a web session is easy once you've
learned a few basics. Here are some tips for getting around:
Softkeys
When browsing the Web, the bottom line of your phone's display contains one or
more softkeys. These keys are shortcut controls for navigating around the Web,
and they correspond to the softkey buttons directly below the phone’s display
screen. Depending on which Web sites you visit, the labels on the softkeys may
change to indicate their function.
To use softkeys, simply press the desired softkey button. If an additional pop-up
menu appears when you press the softkey button, select the menu items using
your keypad (if they’re numbered) or by highlighting the option and pressing MENU
OK .
Scrolling
As with other parts of your phone's menu, you have to scroll up and down to see
everything on some Web sites.
• Press the navigation key up and down to scroll line by line or press the
volume buttons on the side of the phone to scroll one page at a time.
Navigating Between Web Pages
Once you've learned how to use softkeys and scroll, you can start navigating Web
sites.
• Select on-screen items by using the navigation key to highlight the desired
item and pressing the desired softkey button (or pressing MENU
).
OK
You'll find that the left softkey
is used primarily for selecting items. This
softkey is often labeled OK.
• If the items on a page are numbered, you can use your keypad (number
keys) to select an item.
Links, which appear as underlined text, allow you to jump to different Web pages,
select special functions, or even place phone calls.
• Select links by highlighting the link and selecting the appropriate softkey.
40 Web
u440 BMC Guide.book Page 41 Wednesday, October 8, 2008 10:34 AM
• To go back one page, press
BACK on your phone. (Note that
used like a BACKSPACE key to delete text.)
BACK
is also
Using the Menu to Navigate
By pressing the Menu softkey, you can navigate between web pages.
Press the Menu softkey and select one of the following options:
1. Home: To return to the Web Home Page.
2. Forward: One web page (if you have not returned back from a previous
web page, this option is greyed out).
3. Mark this page: To create a Bookmark.
4. My Bookmarks: To see your list of Bookmarks.
5. Search: To type in a keyword and search for it on the web.
6. Send Page to: To send a web address in an SMS message.
7. Go to Web Address: To directly jump to a specific web page.
8. History: To see a list of web pages you have browsed in this session.
9. Page Info: To refresh the information on the current webpage.
10. Browser Options: To change your Wireless Web preferences.
Note: Scroll down the list to select Browser Options.
Web
41
Web
Tip: The tenth item in a numbered list can be selected by pressing
the
key on your phone’s keypad, even though the number 0 doesn’t appear on
the screen.
u440 BMC Guide.book Page 42 Wednesday, October 8, 2008 10:34 AM
Messaging
Now you can exchange text and multimedia messages right from your phone and
stay connected without saying a word. Within the Messaging menu you can also
view the number of voicemail messages you have waiting for you. For more
information on using your phone’s voicemail feature, see ‘Voicemail” on page 46.
The following folders are available in the Messaging menu:
• (1) Send Message: Allows you to send text and picture messages.
• (2) Text Message: Allows you to create and send new text messages, as
well as check your Text Message Inbox.
• (3) Pic Msg: Allows you to create and send new picture messages, as well
as check your Picture Mail Inbox.
• (4) Instant Messaging: Allows you to send and receive instant messages
over the internet (check availability with your service provider).
• (4) Personal Email: Allows you to send and receive email messages over
the internet (check availability with your service provider).
• (5) Mobile Email: Allows you to access and manage your email from
existing ISP email (POP3, IMAP) accounts (check availability with your
service provider).
• (6) Communities: Allows you to access and use online communities
(Facebook).
• (5) Voicemail: Allows you to view or listen to any voice messages saved in
the phone.
• (6) Settings: Allows you to configure the messaging options.
Text Messaging
With Text Messaging, you can use a person’s wireless phone number to send
instant text messages from your phone to their messaging-ready phone – and they
can send messages to you. When you receive a new message, you’ll automatically
be notified with a one-way text message.
In addition, messaging includes a variety of pre-set messages, such as “Where are
you?” that make composing messages fast and easy.
To send a text message:
1. Press
MENU
OK
for Menu.
2. Select Messaging.
3. Select Send Message.
42 Messaging
u440 BMC Guide.book Page 43 Wednesday, October 8, 2008 10:34 AM
4. Select Text. Enter a recipient in the following ways:
• To enter a phone number or email address, press the right softkey
• To send your text message to multiple numbers or addresses, press
the left softkey
for Multiple and enter the phone number or
email address. You can send a text message to a maximum of 10
numbers.
• To send a text message to a Contact, select Go to Contacts and
press MENU
OK . A list of your Contacts appears. Highlight the desired
Contact and press MENU
to add the entry. You can check multiple
OK
Contacts (up to a maximum of 10).
• To select from a list of recently viewed contacts, highlight the desired
Contact from the list already showing and press MENU
to add the entry.
OK
You can check multiple Contacts (up to a maximum of 10).
5. Enter your message using the keypad. If you wish to change your text
options, press the right softkey
for Options and select Text Mode.
Select one of the following options:
• Alpha: Switches your Text entry mode to Alpha.
• Symbol: Switches your Text entry mode to Symbol.
• Number: Switches your Text entry mode to Number.
If you wish to change your text message options, press the right softkey
for Options and select one of the following:
• Add Preset Message: Allows you to add a Preset message to your
text message.
• Add Signature: Allows you to add a signature to your text message.
• Add/Change Recipient: Allows you to add or change a message
recipient.
• Mark as Urgent: Allows you to set the priority to Urgent.
• Set Callback #: Allows you to select None to omit the callback #, to
select your phone #, or to select Custom to enter a different callback
#.
• Save as Draft: Stores a copy of the text message in your Drafts
folder.
6. Press the left softkey
to Send when finished.
Messaging
43
Messaging
for New Addr, and use the keypad to enter the number. When
you are finished, press MENU
OK .
u440 BMC Guide.book Page 44 Wednesday, October 8, 2008 10:34 AM
To read and reply to a Text Message:
When you receive a text message, you will see a message icon on your display
screen.
1. While the message is open, select the left softkey
for Reply.
2. Compose your reply message. When you are finished, press
3. Press the left softkey
MENU
OK
.
to Send.
Note: The last preset message used automatically moves to the top of the list when
you send a new message.
To erase messages:
1. Press
MENU
OK
for Menu.
2. Select Messaging.
3. Select Text Message.
4. Use the navigator key to highlight the name of the Contact to see their
messages and press MENU
OK .
5. Press the navigator key to select the message.
6. Press the right softkey
for Options and select Delete.
• To delete more than one message, navigate to the list of messages
under the Contact name, press the right softkey
and select Delete or Delete All.
for Options,
Picture Message
Your phone gives you the ability to take pictures, view them using the phone's
display, and instantly send them to your friends and family. In addition to sending
your pictures to friends and family, you can also send them to a Picture Messages
Web site for storage. The camera can take and store pictures and the image quality
is similar to what you see on your computer screen.
Note: You must request this feature from your service provider for it to work
correctly.
To send a Picture message from your phone:
1. Press
44 Messaging
MENU
OK
for Menu.
u440 BMC Guide.book Page 45 Wednesday, October 8, 2008 10:34 AM
2. Select Messaging.
3. Select Send Message.
5. Enter a recipient from the “Send to Recent” list, from your Contacts, or
enter a new phone number or email address.
6. If you have registered your phone, you can retrieve pictures from your
phone or online to attach to your message. Using the navigation key
select either Inbox to send a picture already stored in your phone or
New Picture to take a new picture prior to sending your message.
• For more information on taking a picture, see "Taking Pictures" on
page 77.
• If you selected In Camera, use the navigation key to highlight a
picture and press MENU
OK . A checkmark appears beside the picture. You
can select up to 28 pictures.
7. Once you have finished selecting all the pictures you wish to send press
the left softkey
for Next.
8. Using the navigation key select the destination you wish to send the
picture(s) to and press MENU
OK .
9. Enter your destination and press the left softkey
send each message to up to 25 destinations.
for OK. You can
10. When you have finished entering all the desired destinations, press the
left softkey
for Next.
• If you wish to add text to your picture message, highlight Subj and
Text and press the right softkey
for Add. Enter your text and
press the left softkey
for Save.
• If you wish to add an audio clip, highlight Audio and press the right
softkey
for Record. From the Add Voice Memo screen, press
the left softkey
for Record to record your message. When
finished, press the left softkey
for Done.
11. Press the left softkey
for Send.
Mobile Mail
Your device comes equipped with the ability for you to access and manage your
email from existing ISP email (POP3, IMAP) accounts. Depending on your
agreement with your service provider, you may be charged to download and install
this application.
Messaging
45
Messaging
4. Select Pic Msg.
u440 BMC Guide.book Page 46 Wednesday, October 8, 2008 10:34 AM
Voicemail
Setting Up Your Voicemail
All unanswered calls to your phone are automatically transferred to your voicemail,
even if your phone is in use or turned off. Therefore, you will want to set up your
Voicemail and personal greeting as soon as your phone is activated.
To set up your voicemail:
1. Press and hold
.
2. Follow the system prompts to create your passcode, record your
greeting, and record your name announcement.
Note: You must request this feature from your service provider for it to work
correctly.
Note: The voicemail setup process may vary in certain Affiliate areas.
Voicemail Notification
There are several ways your phone alerts you of a new message:
• By displaying a message on the screen.
• By sounding the assigned ringer type.
• By displaying
at the top of the screen.
New Voicemail Message Alerts
When you receive a new voice message, your phone alerts you and prompts you to
call your voicemail.
To call your voicemail:
• Press and hold
.
Important: When you are roaming off your home network, you may not receive
notification of new voicemail messages. It is recommended that you periodically
check your voicemail by dialing 1 + area code + your phone number. When your
voicemail answers, press
and enter your passcode. You will be charged
roaming rates when accessing voicemail while roaming off your home network.
46 Messaging
u440 BMC Guide.book Page 47 Wednesday, October 8, 2008 10:34 AM
Retrieving Your Voicemail Messages
You can review your messages directly from your phone or from any other touchtone phone. To dial from your phone, you can either speed dial your voicemail or
use the menu keys.
To Use One-Touch Message Access:
• Press and hold
. Follow the system prompts.
To Use the Menus:
1. Press
MENU
OK
for Menu.
2. Select Messaging.
3. Select Voicemail.
4. Select Call Voicemail.
Note: You may be charged for airtime minutes when you are accessing your
voicemail from your phone.
Clearing the Message Envelope
Your phone may temporarily continue to display the message envelope after you
have checked your voice and text messages.
To clear the message envelope from the display screen:
1. Press
MENU
OK
for Menu.
2. Select Messaging.
3. Select Voicemail.
4. Select Clear Envelope.
5. Press the navigation key up to select Yes and press
MENU
OK
.
Settings
There are several options associated with messaging. The Message Setup menu
allows you to customize the options to fit your preferences. The message options
are divided into the following categories:
Messaging
47
Messaging
Note: Your phone service accepts messages even when it is turned off. However,
you are only notified of new messages when your phone is turned on and you are
in a Service Area.
u440 BMC Guide.book Page 48 Wednesday, October 8, 2008 10:34 AM
General
Notification: Allows you to configure whether new messages will appear
with a pop-up message or with an icon.
•
• Message Alert: Allows you to configure the Volume level, Type, and
Reminder settings for Message Alerts.
• Auto-Erase: If Yes is selected, old messages are automatically deleted from
the mail boxes when they become full. This allows the new messages to be
added to a full mail box without having to manually delete old messages to
free up space first.
Text Message
Save In Outbox: If Yes is selected, a copy of the message is automatically
saved in the Outbox after being sent.
•
• Priority: Allows you to configure the default Priority level for messages.
• Call Back #: Allows you to configure the default Call Back number for
messages.
• Edit Signature: If the option is On, your signature will be appended to each
message you send.
• Preset Messages: Allows you to edit or change the default pre-written
messages.
Alerts Setup
Allows you to automatically receive web alerts to your Inbox.
To access the Settings menu:
1. Press
MENU
OK
for Menu.
2. Select Messaging.
3. Select Settings.
Notification
The Notification option allows you to select whether a message in a popup window
appears to alert you that new messages are waiting.
To turn On the Display Popup option:
1. In the Settings menu, select General.
2. Select Notification.
3. Select Message & Icon or Icon only using the navigation key and press
MENU
to select.
OK
48 Messaging
u440 BMC Guide.book Page 49 Wednesday, October 8, 2008 10:34 AM
Message Alert
Volume
This option allows you to select the volume level for message alerts for voicemail,
text messaging, and picture mail. The level can be set to Ringer off, Vibrate, 1Beep, or a volume level between 1-8.
To set the volume:
1. In the Settings menu, select General.
2. Select Message Alert.
3. Select Volume.
4. Select the type of message that this alert is for: Voicemail, Text
Message or Pic Msg.
5. Press the navigation key up or down to move between ringer options.
For Separate Volume, press the navigation key up or down to select the
desired volume level and press MENU
OK .
Note: Press the left softkey
for Vib On to turn on vibration.
Type
This option allows you to select the ringer type for voicemail, text messaging, and
picture mail. Any ringer saved in the phone can be used as the default ringer.
Ringers that are downloaded can also be assigned.
To set the ringer type:
1. In the Settings menu, select General.
2. Select Message Alert.
3. Select Type.
4. Select the type of message that this alert is for: Voicemail, Text
Message or Pic Msg.
5. Press the navigation key up or down to select Ring Tones, Melodies, or
My Downloads.
Messaging
49
Messaging
The Message Alerts menu allows you to configure the volume and message
reminder default settings for voicemail, text messages, and picture mail.
u440 BMC Guide.book Page 50 Wednesday, October 8, 2008 10:34 AM
6. Press the navigation key down to preview the first ringer. Press up or
down to preview the other ringers associated with the ringer group
selected. When finished, press MENU
to save the desired ringer.
OK
Reminder
This option allows you to configure how often the reminder for new messages is
sounded or displayed on the phone.
The available options are:
• Off: No reminder is sounded or heard on the phone.
• Once: A reminder is sounded or displayed once to alert you of new
messages.
• Every 2 min: A reminder is sounded or displayed every two minutes until
the new message is read.
To set the message reminder option:
1. In the Settings menu, select General.
2. Select Message Alert.
3. Select Reminder.
4. Press the navigation key up or down to select the desired duration and
press MENU
to select.
OK
Auto-Erase
This option allows you to automatically delete old messages when the Inbox
becomes full. This prevents new messages from being rejected due to the Inbox
being full.
To turn this option on or off:
1. In the Settings menu, select General.
2. Select Auto Erase.
3. Press the navigation key up or down to select Yes or No and press
to select.
MENU
OK
Save in Outbox
This option allows you to save a copy of the outgoing text message in the outbox.
To turn this option on or off:
1. In the Settings menu, select Text Message.
2. Select Save in Outbox.
50 Messaging
u440 BMC Guide.book Page 51 Wednesday, October 8, 2008 10:34 AM
3. Press the navigation key up or down to select Yes or No and press
to select.
MENU
OK
• Normal: This option sends the message as normal with regular delivery.
• Urgent: This option sends the message at the highest level and alerts the
recipient that it is urgent.
To select the priority level:
1. In the Settings menu, select Text Message.
2. Select Priority.
3. Select Normal or Urgent using the navigation key and press
select.
MENU
OK
to
Call Back #
This option allows you to enter a call back number that is automatically attached to
your outgoing messages.
To access the call back number option:
1. In the Settings menu, select Text Message.
2. Select Call Back #.
3. Use the navigation key to highlight either None, your phone #, or
Custom for a custom # and press MENU
OK .
4. For the custom call back #, press and hold BACK to erase the existing
number. Enter the number using the keypad and press MENU
to save.
OK
Edit Signature
The Edit Signature menu allows you to create a signature of up to 15 characters
that is automatically appended to all your text messages.
To edit your signature, or to turn signatures on or off:
1. In the Settings menu, select Text Message.
2. Select Edit Signature.
3. Press the navigation key up or down to highlight On or Off and press
MENU
OK .
Messaging
51
Messaging
Priority
This option allows you to configure the default Priority attached to your outgoing
messages. There are two priority levels associated with text messaging. They are:
u440 BMC Guide.book Page 52 Wednesday, October 8, 2008 10:34 AM
4. If signatures are on, your current signature is displayed. Press and hold
BACK to erase the signature. Enter your new signature and press the
left softkey
for Done. You can also edit the existing signature
using the keypad.
Preset Messages
Preset messages are used to enter common responses to questions often received
in text messages. A preset message can be selected and automatically entered into
the message. Preset messages can also be changed to whatever you want to use
by editing the 20 pre-set entries already stored in your phone.
To edit a preset message:
1. In the Settings menu, select Text Message.
2. Select Preset Messages.
3. Press the navigation key up or down to highlight the desired message or
available entry and press MENU
to edit.
OK
4. Press and hold BACK to erase the message. Enter your new message
and press MENU
to save. You can also edit the existing message using the
OK
keypad.
52 Messaging
u440 BMC Guide.book Page 53 Wednesday, October 8, 2008 10:34 AM
Contacts
Finding Contacts
There are several ways to display your Contacts entries: by name, speed dial
number, and voice dial recognition.
To find an entry from the Contacts menu:
1. From standby mode, press the right softkey
Tip: You can also press
MENU
OK
for Contacts.
for Menu and select Contacts > Phonebook.
2. Enter the first few letters or name of the contact.
3. Scroll to highlight the name and press
to make the call.
Adding a New Contact
To add a new contact:
1. Enter a new phone number and press the right softkey
for Options.
2. Select Save.
3. Highlight New Entry and press MENU
OK . If your Contacts list is empty, skip
this step and proceed to step 4.
4. Select the Type using the navigation key and press
• Mobile
• Pager
• Home
• Fax
MENU
OK
.
• Work
• Others
5. Enter the name using the keypad.
6. Press the left softkey
for Done.
After you have saved the number, the new Contacts entry is displayed.
Editing a Contact
You can always edit a Contact to change a phone number, add an additional phone
number, or provide a custom ringer or image.
Contacts
53
Contacts
Your phone can store up to 600 numbers. Each contact can store up to a total of
seven phone numbers. For instance, you could store both the home and mobile
numbers for someone. Each Contact name can contain up to 64 characters.
u440 BMC Guide.book Page 54 Wednesday, October 8, 2008 10:34 AM
To edit a Contact:
1. From standby mode, press the right softkey
for Contacts.
2. Enter the first few letters or name of the contact.
3. Select the desired entry and press
4. Press the right softkey
MENU
OK
.
for Options and select Edit.
5. Press the navigation key down until the desired label is selected, and
press MENU
OK . You can edit the following categories:
• To edit a number, highlight the desired number and press
you have entered the number, press
MENU
OK
MENU
OK
. Once
.
• To add a new phone number, highlight <Add number>. Once you have
entered the number, press
MENU
OK
to select a Type.
• To edit a ringer type, highlight the current ringer (normally Ring
:Default) and press MENU
OK . Using the navigation key, select a Ringer
Category and the desired Ringer. When you are finished, press MENU
OK .
• You can also add an Email address, URL, Memo, or Image to this
contact.
6. Press the left softkey
for Done.
Speed Dial #s
You can assign up to 98 phone numbers from Phonebook, which you use most
frequently, to the number keys (2 to 99). Then dial them easily whenever you want,
simply by pressing and holding the associated number key.
To assign a speed dial #:
1. Press
MENU
OK
for Menu.
2. Select Contacts.
3. Select Phonebook.
4. Using the navigation key, highlight Add New.
5. Press the right softkey
for Options and select Speed Dial.
6. Using the navigation key, highlight the number that you wish to assign
and press the right softkey
for Assign.
7. Highlight the Contact that you wish to assign to the speed dial # and
press MENU
OK .
To call a Contact using speed dial, see "Using One-Touch or Two-Touch Speed
Dialing" on page 18.
54 Contacts
u440 BMC Guide.book Page 55 Wednesday, October 8, 2008 10:34 AM
My Name Card
Contacts
This function is similar to an entry in the Phonebook, except that it contains your
contact information, like a business card. You can send the name card to others
via Bluetooth.
To send a name card via Bluetooth:
1. Press
MENU
OK
for Menu.
2. Select Contacts.
3. Select Phonebook.
4. Using the navigation key, highlight Add New.
5. Press the right softkey
for Options and select My Name Card.
Your name card is displayed onscreen. You can edit your name card the
same as any other Contact. For more information, see "Editing a
Contact" on page 53.
Services
This Services menu holds a directory of useful customer service and directory
assistance numbers.
To call customer service or directory assistance:
1. Press
MENU
OK
for Menu.
2. Select Contacts.
3. Select Phonebook.
4. Using the navigation key, highlight Add New.
5. Press the right softkey
for Options and select Services.
6. Select Dir Assist, Taxi, or Caller Ring Tunes.
7. The number is displayed on-screen. To call the number, press
.
Memory
You can quickly check to see how many Contact spaces you have used and have
remaining on your phone.
To see the number of Contacts used and remaining:
1. Press
MENU
OK
for Menu.
2. Select Contacts.
3. Select Phonebook.
4. Using the navigation key, highlight Add New.
Contacts
55
u440 BMC Guide.book Page 56 Wednesday, October 8, 2008 10:34 AM
5. Press the right softkey
for Options and select Memory. Your
phone displays the number of Contact spaces used and how many
remain empty.
56 Contacts
u440 BMC Guide.book Page 57 Wednesday, October 8, 2008 10:34 AM
Tools
Using the Alarm Clock
To use the alarm clock:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Alarm.
4. Select Alarm #1, Alarm #2, Alarm #3.
5. Press the navigation key left or right and select On.
6. Press the navigation key down once and enter the alarm time. (Press
the right softkey
for AM or PM.)
7. Press the navigation key down once to select the desired ringer. (Cycle
through the ringers by pressing the navigation key up or down.)
8. Press the navigation key down once to select the alarm repeat. Press
the navigation key left or right and select one of the following options:
• Daily
• Once
• Mon to Fri
• Sat & Sun
9. Press the navigation key down once to select the Snooze Interval. Press
the navigation key left or right and select one of the following options:
• 5 minutes
• 10 minutes
• 15 minutes
• 20 minutes
10. Press the left softkey
for Done.
Bluetooth
Bluetooth is a short-range communications technology that allows you to connect
wirelessly to a number of Bluetooth devices, such as headsets, hands-free car kits,
and Bluetooth-enabled handhelds, PCs, and wireless phones. For more
information, see "Bluetooth" on page 86.
Tools 57
Tools
Your phone comes with a built-in alarm clock with multiple alarm times.
u440 BMC Guide.book Page 58 Wednesday, October 8, 2008 10:34 AM
Calculator
Your phone comes with a built-in calculator.
To use the calculator:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Calculator.
4. Enter a number using the keypad. (Use
to insert a decimal point and/
or
to make the number negative or positive.)
5. Use the navigation key to select a mathematical function:
• Left to Subtract
• Right to Add
• Up to Multiply
• Down to Divide
6. Enter the next number using the keypad. Repeat steps 4 and 5 as
necessary.
7. Press
MENU
OK
to view the results.
Calendar
Your Calendar helps organize your time and reminds you of important events. You
can schedule events for either the current day or a specific calendar date.
To add an event to today’s calendar:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Today.
• If you have no events currently scheduled for today, you will see “No
Schedule” automatically displayed.
• If you have one or more events scheduled for today, they are
displayed. Press the left softkey
for Add New.
4. Enter the event description using the keypad and press the left softkey
for Next.
5. Select the type of event to be Appointment, Personal, Business,
Birthday, or Vacation.
58 Tools
u440 BMC Guide.book Page 59 Wednesday, October 8, 2008 10:34 AM
6. Press the navigation key down and select one of the following:
• 30min before
• 1Hr before
Tools
• No Alarm
• On Time
• 10min before
7. Press the navigation key down and select the frequency of the event to
be Once, Daily, Weekly, Monthly, or Yearly.
8. Press the navigation key down and select the type of alert for the event.
Select from the following ringer categories: Ring Tones, Melodies, or
My Downloads. Highlight the desired ringer and press MENU
OK .
9. Enter the Start Time and Date using the keypad. (Press the right softkey
for AM or PM.)
10. Enter the End Time and Date using the keypad. (Press the right softkey
for AM or PM.)
11. Press the left softkey
for Done.
To add an event for a specific calendar date:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Scheduler.
4. Using the navigation key scroll to the desired date.
5. Press
MENU
OK
to view the highlighted date.
• If you have no events currently scheduled for this date, you will see
“No Schedule” automatically displayed.
• If you have one or more events scheduled for this date, they are
displayed. Press the left softkey
for Add New.
6. Create your event, as described in steps 4 to 11 of "To add an event to
today’s calendar:" on page 58.
Event Alerts
There are several ways your phone alerts you of scheduled events:
• By playing the assigned ringer type.
• By illuminating the backlight.
Tools 59
u440 BMC Guide.book Page 60 Wednesday, October 8, 2008 10:34 AM
To select the ringer:
1. Press
MENU
OK
for Menu.
2. Select Settings > Sounds > Ringer Type.
3. Select Scheduler.
4. Press the navigation key up or down to select the desired ringer
category.
5. Press the navigation key down and then left or right to select the desired
ringer or melody.
6. Press
MENU
OK
to save.
Viewing Events
To view your schedules events:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Today or Scheduler.
• If you selected Today, the day’s events are displayed.
• If you selected Scheduler, use the navigation key to scroll to the
desired date and press
MENU
OK
to view that day’s events.
Erasing Events for a Day
To erase events for a day:
1. View the day for which you wish to erase the event. See "Viewing
Events" on page 60 for more details.
2. Press the right softkey
for Options.
3. Select Delete or Delete All.
4. Highlight Yes using the navigation key and press
Erasing All Events in your Scheduler
To delete all scheduled events:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Scheduler.
4. Press the right softkey
5. Select Delete All.
60 Tools
for Options.
MENU
OK
to confirm.
u440 BMC Guide.book Page 61 Wednesday, October 8, 2008 10:34 AM
6. Highlight Yes using the navigation key and press
MENU
OK
to confirm.
Task List
You can create and view a list of tasks.
Tools
To add a task:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Task List.
• If you have no tasks currently scheduled for today, you will see “No
task entered” automatically displayed.
• If you have one or more tasks scheduled for today, they are
displayed. Press the left softkey
for Add New.
4. Enter the task description using the keypad and press the left softkey
for Next.
5. Press the navigation key left or right to select a Low or High priority.
6. Enter the Due Time and Date using the keypad. (Press the right softkey
for AM or PM.)
7. Press the left softkey
for Done.
To view a task:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Task List.
4. Use the navigation key to scroll to the desired task and press
view the task details.
MENU
OK
to
To delete one or more tasks:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Task List. If you wish to delete a specific task, highlight it using the
navigation key.
4. Press the right softkey
for Options.
5. Select Delete or Delete All.
6. Highlight Yes using the navigation key and press
MENU
OK
to confirm.
Tools 61
u440 BMC Guide.book Page 62 Wednesday, October 8, 2008 10:34 AM
To set the state of a task:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Task List. If you wish to delete a specific task, highlight it using the
navigation key.
• If you have no tasks currently scheduled for today, you will see “No
Task” automatically displayed.
• If you have one or more tasks scheduled for today, they are
displayed. Press the left softkey
4. Press the right softkey
for Add New.
for Options.
5. Select Set State. You can set the state to ToDo, InProcess, or
Completed. An icon beside the task indicates its state.
6. Press
MENU
OK
to confirm.
Countdown
Countdown allows you to enter a future date and time into the phone and then see
the amount of days, hours, and minutes until that time is reached.
To set up a new countdown:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Countdown.
• If there are no existing countdowns, “No countdown entered”
displays and the New Countdown screen is automatically displayed.
• If you have one or more set countdowns, they are displayed. Press
the left softkey
for Add New.
4. Enter a name using the keypad and press
5. Enter the Time. (Press the right softkey
6. Enter the Date and press the left softkey
To view a countdown:
1. Press
MENU
OK
for Menu.
2. Select Tools > Calendar.
3. Select Countdown.
62 Tools
MENU
OK
.
for AM or PM.)
for Done.
u440 BMC Guide.book Page 63 Wednesday, October 8, 2008 10:34 AM
4. Press the navigation key up or down to highlight the desired
countdown and press MENU
OK .
Mass Storage
You can connect your phone to your personal computer using a USB data cable,
using your phone as a portable disk drive.
Connect to PC
You must insert a memory card into the phone in order to connect the phone to a
computer. The memory card is the destination for all file transfer.
To transfer files between your phone and your computer:
1. Connect your phone to the data cable.
2. Connect the data cable to your computer.
3. Press
MENU
OK
for Menu.
4. Select Tools > Mass Storage.
5. Select Connect to PC. The phone now appears as a removable disk on
your computer.
Warning: Call is disabled when the device is connected as a mass storage device.
6. Using your computer’s navigation systems, transfer your files between
the computer and the phone.
Warning: Do not disconnect the phone from the data cable while transferring files!
Please follow proper shutdown procedure for removable storage device to avoid
file corruption.
7. When you are finished transferring files, press the right softkey
for Disconnect. Press left softkey
for Disconnect to confirm.
8. It is now safe to remove the phone from the data cable.
Tools 63
Tools
Tip: When viewing an existing countdown, press the navigation key up or down to
cycle between the other countdown entries.
u440 BMC Guide.book Page 64 Wednesday, October 8, 2008 10:34 AM
File Manager
You can view and manage the files stored on your phone. Your phone can include
any of the following folders that are used by different applications:
• DCIM: stores your photos and videos.
• music: used by the Music application. If you transfer music files from your
computer to your phone to be played by the Music application, you should
place them here.
Note: There is no moving of files from one folder to another folder via the phone
UI. If you need to move files, connect the phone to your computer via the data
cable and use the Connect to PC application.
1. Press
MENU
OK
for Menu.
2. Select Tools > Mass Storage.
3. Select File Manager.
4. Using the navigation keys, highlight Phone or Memory Card and press
MENU
OK .
5. Navigate through your phone’s menu tree to the desired file.
• To erase a file, highlight the file to be deleted, press the right softkey
for Options, and select Erase.
• If the file is viewable or playable on your phone, press
MENU
OK
to view/
play. Not all files can be viewed or played.
Memory Info.
To view the amount of storage space used on your phone:
1. Press
MENU
OK
for Menu.
2. Select Tools > Mass Storage.
3. Select Memory Info..
4. Using the navigation keys, highlight ALL, Phone, or Card and press
MENU
OK .The amount of storage space used and available is displayed onscreen.
5. When you are finished, press the left softkey
64 Tools
for Done.
u440 BMC Guide.book Page 65 Wednesday, October 8, 2008 10:34 AM
Memo Pad
Your phone comes with a memo pad you can use to compose and store
reminders and notes to help keep you organized.
Tools
To compose a memo:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Memo Pad.
• If you have no memos composed, “(None)” is automatically
displayed.
• If you have one or more composed menus, they are displayed. Press
the left softkey
for Add New.
4. Enter up to 512 characters in the memo using the keypad and press the
left softkey
for Done. (See "Entering Text" on page 19.)
To view a memo:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Memo Pad.
4. Use the navigation key to scroll to the desired memo and press
view the memo details.
MENU
OK
to
To delete saved memos:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Memo Pad.
4. Highlight the memo you wish to delete using the navigation key.
5. Press the right softkey
for Options.
6. Select Delete or Delete All.
7. Highlight Yes using the navigation key and press
MENU
OK
to confirm.
To send the memo as a text message:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Memo Pad.
Tools 65
u440 BMC Guide.book Page 66 Wednesday, October 8, 2008 10:34 AM
4. Select the memo you wish to send.
5. Press the right softkey
for Options.
6. Select Send Msg.
7. Enter the phone number or email address of the person(s) to whom
you’re sending a message. (See "Text Messaging" on page 42 for more
information.)
World Time
World time displays the current time in twenty-four different time zones around the
world together with one or more major cities, states, regions, or countries in a time
zone.
To access world time:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select World Time.
4. Press the navigation key left, right, up, or down to display the different
time zones.
5. Press the left softkey
(DST) On or Off.
for Set DST to turn Daylight Savings Time
Note: Your handset does not automatically turn DST on or off based on the
calendar date.
Updating Your Phone
You can automatically download and update the software on your phone. Only the
internal software is updated and other information on the phone, such as Contacts,
is not deleted.
To update your phone:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Update Phone.
4. Select Update Firmware.
5. Follow the onscreen instructions to update the phone.
66 Tools
u440 BMC Guide.book Page 67 Wednesday, October 8, 2008 10:34 AM
Voice Memo
You can use your phone to record brief memos to remind you of important events,
phone numbers, or other items.
Tools
Recording Voice Memos
To record a voice memo:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Voice Memo.
4. Select Record. (The phone prompts you to start recording after the
beep.)
5. Wait for the beep and then start speaking. (As it is recording, the phone
displays a countdown timer that shows how many seconds are left for
recording.)
• Press the left softkey
to Pause the memo. (When a memo is
paused, press the left softkey
again to Resume recording.)
6. To finish recording, press the right softkey
for Finish.
To record a conversation during a phone call:
1. During a call, press the right softkey
for Options.
2. Select Voice Memo. (As it is recording, the phone displays a countdown
timer that shows how many seconds are left for recording.)
• Press the left softkey
to Pause the memo. (When a memo is
paused, press the left softkey
again to Resume recording.)
3. Press the right softkey
countdown completion
for Done to end the recording prior to the
Note: A total of 10 minutes in 10 separate memos can be recorded and saved.
Individual memos can record up to 60 seconds of audio.
Reviewing and Erasing Memos
To play the voice memos you have recorded:
1. Press
MENU
OK
for Menu.
2. Select Tools.
Tools 67
u440 BMC Guide.book Page 68 Wednesday, October 8, 2008 10:34 AM
3. Select Voice Memo.
4. Select Review. (The phone displays a list of saved memos, with the first
one selected.)
5. Select a memo and press MENU
OK .
— or —
Press the number corresponding to the memo you want to review. (The
phone replays the memo.)
• Press the left softkey
to Pause the memo. (When a memo is
paused, press the left softkey
again to Resume playing.)
To erase an individual memo:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Voice Memo.
4. Select Review. (The phone displays a list of saved memos, with the first
one selected.)
5. Highlight the memo to erase.
6. Press the right softkey
for Options and select Delete.
7. Press the navigation key up to select Yes and press
MENU
OK
.
MENU
OK
.
To erase all voice memos:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Voice Memo.
4. Select Erase All.
5. Press the navigation key up to select Yes and press
Voice Service
For more information, see "Voice Service" on page 33.
68 Tools
u440 BMC Guide.book Page 69 Wednesday, October 8, 2008 10:34 AM
Call History
You’ll find the Call History feature very helpful. It is a list of the last 60 phone
numbers (or Contacts entries) for calls you missed, made, or accepted. Call
History makes redialing a number fast and easy. It is continually updated as new
numbers are added to the beginning of the list and the oldest entries are removed
from the bottom of the list.
Each entry contains the phone number (if it is available) and Contacts entry name
(if the phone number is in your Contacts). Duplicate calls (same number and type
of call) may only appear once on the list.
To view a Call History entry:
1. Press
MENU
OK
for Menu.
2. Select Calls.
3. Select Recent Calls.
4. Use the navigation key to select a Contact name to view their messages.
Tip: You can also access your list of recent calls from standby mode by pressing
the
key.
Call History Options
For additional information on a particular call, highlight a Call History entry and
press MENU
OK . The time and date of the call are displayed.
Tip: You can also scroll between Call History entries by pressing the navigation key
up or down.
Press the left softkey
for Send Msg to send a text or picture message. Press
the right softkey
for Options to select one of the following options for the
entry:
• Delete/Delete All: To erase either this number or all numbers from your
Call History.
• Prepend: To add a prefix before dialing the phone number.
• Contact Details: To view the details of the Contact.
• Save Contact: To save the Contact to your phonebook.
Call History
69
Call History
Viewing History
u440 BMC Guide.book Page 70 Wednesday, October 8, 2008 10:34 AM
Making a Call From Call History
To place a call from Call History:
1. Press
MENU
OK
for Menu.
2. Select Calls.
3. Select Recent Calls.
4. Highlight the entry you want to call and press
number.
to dial the
Tip: When in standby mode, you can also press the
key to show your
recent calls. Highlight the entry you want to call and press
to dial the
number.
Note: You cannot make calls from Call History to entries identified as
Unknown or Restricted.
Saving a Phone Number From Call History
Your phone can store up to 600 numbers. Each contact can store up to a total of
seven phone numbers, and each Contact’s name can contain up to 64 characters.
To save a phone number from Call History:
1. Press
MENU
OK
for Menu.
2. Select Calls.
3. Select Recent Calls.
4. Highlight the entry you want to save and press
MENU
OK
.
5. Press the right softkey
for Options and select Save.
Follow the onscreen prompts to complete the entry. (See "Saving a
Phone Number" on page 16.)
After you have saved the number, the new Contacts entry is displayed.
Note: You cannot save phone numbers already in your Contacts or from calls
identified as Unknown ID or Restricted.
70 Call History
u440 BMC Guide.book Page 71 Wednesday, October 8, 2008 10:34 AM
Prepending a Phone Number From Call History
Call History
If you need to make a call from Call History and you happen to be outside your
local area code, you can add the appropriate prefix by prepending the number.
To prepend a phone number from Call History:
1. Press
MENU
OK
for Menu.
2. Select Calls.
3. Select Recent Calls.
4. Highlight the entry you want to prepend and press
5. Press the right softkey
MENU
OK
.
for Options, and select Prepend.
6. Use the keypad to enter the desired numbers.
7. Press
or the left softkey
to Call.
Erasing Call History
To erase an individual Call History entry, see “Call History Options” on page 69.
To erase Call History:
1. Press
MENU
OK
for Menu.
2. Select Calls.
3. Select Recent Calls.
4. Press the right softkey
for Options and select Delete or Delete All.
5. Press the left softkey
to Delete.
Air Time
Air time allows you to check the time of the last call or the total air time since your
phone was activated on the network. These times are not meant for billing
purposes.
To view the air time:
1. Press
MENU
OK
for Menu.
2. Select Calls.
3. Select Air Time.
4. Select Last Call or Total Calls.
Call History
71
u440 BMC Guide.book Page 72 Wednesday, October 8, 2008 10:34 AM
Music Player
Music Player gives you the ability to listen to audio clips from your memory card.
After you access the Music Player menu, your phone displays all the media content
that is saved on your memory card, if installed.
To listen to an audio clip saved on your memory card:
1. Press
MENU
OK
for Menu.
2. Select Music Player.
3. Select an entry and press
MENU
OK
to begin playing.
To delete an audio clip saved on your memory card:
1. Press
MENU
OK
for Menu.
2. Select Music Player.
3. Select an entry and press the right softkey
Erase.
72 Music Player
for Options and select
u440 BMC Guide.book Page 73 Wednesday, October 8, 2008 10:34 AM
My downloads
Ringers
Downloading Ringers
To download an available ringer to your phone:
1. Press
MENU
OK
for Menu.
2. Select My downloads.
3. Select Ringers.
4. Select Get New Ringers. The web will launch and take you to the
Ringers download menu.
5. Use your navigation key to highlight and select a ringer you wish to
download. (For more information on navigating the Web, see
"Navigating the Wireless Web" on page 40.)
6. Follow the web page instructions to complete your purchase.
Note: You can store a limited number of downloaded ringers on your phone,
depending on the file sizes.
Assigning Downloaded Ringers
Downloaded ringers can be assigned directly from the My downloads menu and
are also available through the Settings menu. To assign a downloaded ringer
through the Settings menu, see "Selecting Ringer Types" on page 94.
To assign a downloaded ringer through the Downloads menu:
1. Press
MENU
OK
for Menu.
2. Select My downloads.
3. Select Ringers.
4. Highlight the desired ringer and press MENU
to play it. When you are
OK
finished, press BACK to return to the Ringers menu.
5. Press the right softkey
and select Set as.
My downloads
73
My downloads
With your new web-enabled phone, you have access to a variety of services such
as downloadable Games, Ringers, Screen Savers, and Applications. While each
type of download involves a different file type, the basic method for accessing and
downloading files is the same.
u440 BMC Guide.book Page 74 Wednesday, October 8, 2008 10:34 AM
6. Select Voice Calls.
7. Select With Caller ID or No Caller ID.
8. Press
MENU
OK
to exit.
Note: You can assign a ringer to more than one type of call.
Screen Savers
Downloading Screen Savers
To download an available Screen Saver to your phone:
1. Press
MENU
OK
for Menu.
2. Select My downloads.
3. Select Screen Savers.
4. Select Get New Screen Savers. The web will launch and take you to the
Screen Savers download menu.
5. Use the navigation key to highlight and select a Screen Saver you wish
to download. (For more information on navigating the Web, see
‘Navigating the Wireless Web” on page 40.)
6. Follow the web page instructions to complete your purchase.
Note: You can store a limited number of downloaded Screen Savers on your phone,
depending on the file sizes.
Assigning Downloaded Screen Savers
Downloaded Screen Savers may be assigned directly from the My downloads
menu and are also available through the Settings menu.
To assign a downloaded Screen Saver through the Settings menu, see "Changing
the Main Screen" on page 89.
To assign a downloaded Screen Saver from the Downloads menu:
1. Press
MENU
OK
for Menu.
2. Select My downloads.
3. Select Screen Savers.
74 My downloads
u440 BMC Guide.book Page 75 Wednesday, October 8, 2008 10:34 AM
• If you wish to see the screen saver, highlight the desired screen
4. Press the right softkey
BACK
to
and select Set as.
5. Select Screen Saver.
6. Press
to exit.
Note: You can assign a Screen Saver to more than one task.
Games
You can play a variety of entertaining and graphically-rich games on your phone.
New games are easy to download and play.
Downloading Games
To download a game to your phone:
1. Press
MENU
OK
for Menu.
2. Select My downloads.
3. Select Games.
4. Select Get New Games. The web will launch and take you to the Games
download menu.
5. Use the navigation key to highlight and select a game you wish to
download. (For more information on navigating the Web, see
"Navigating the Wireless Web" on page 40.)
6. Follow the web page instructions to complete your purchase.
Note: You can store a limited number of downloaded games on your phone,
depending on the file sizes.
Playing Games
To play a downloaded game on your phone:
1. Press
MENU
OK
for Menu.
2. Select My downloads.
3. Select Games.
My downloads
75
My downloads
saver and press MENU
to view. When you are finished, press
OK
return to the Screen Savers menu.
u440 BMC Guide.book Page 76 Wednesday, October 8, 2008 10:34 AM
4. Select the game you wish to play.
5. Follow the on-screen instructions to play the game. When you are
finished, select Exit (or Quit) or press
.
Applications
Downloading Applications
To download an application to your phone:
1. Press
MENU
OK
for Menu.
2. Select My downloads.
3. Select Applications.
4. Select Get New Applications. The web will launch and take you to the
application download menu.
• If you have an Intellisync account, you can select Intellisync and
enter your login and password to access new applications. Contact
your service provider for more details.
5. Use your navigation key to highlight and select an application you wish
to download. (For more information on navigating the Web, see
‘Navigating the Wireless Web” on page 40.)
6. Follow the web page instructions to complete your purchase.
Note: You can store a limited number of downloaded applications on your phone,
depending on the file sizes.
76 My downloads
u440 BMC Guide.book Page 77 Wednesday, October 8, 2008 10:34 AM
Camera
Taking Pictures
To take a picture with the phone open:
1. Press
MENU
OK
for Menu.
2. Select Camera > Camera.
Shortcut: To activate camera mode, you can also press and hold the the side
camera button (see illustration on page 2).
3. Using the phone’s main LCD as a viewfinder, aim the camera lens at
your subject.
4. Press either the left softkey
for Capture, MENU
or the side camera
OK
button until the shutter sounds. (Make sure the camera is steady.)
5. After the picture is taken, it is saved in your My Pics folder. Press the
right softkey
for Options and choose one of the following options:
• (1) Send Msg: To send your picture to someone using Picture Mail.
For more information, see "Picture Message" on page 44.
• (2) Camera Mode: To take another picture.
• (3) Upload: To upload the picture to your online folder, see "Creating
an Online Album" on page 82.
• (4) Assign: To assign the picture to Picture ID, Screen Saver, or
Incoming Call, see "Display" on page 89.
• (5) Erase: To erase this picture.
• (6) Review Album: To review the images stored in your camera.
6. To exit camera mode, press
.
Camera
77
Camera
Taking pictures with your phone’s built-In Phone is as simple as choosing a
subject, pointing the lens, and pressing a button. You can activate camera mode
and take pictures whether the phone is open or closed.
u440 BMC Guide.book Page 78 Wednesday, October 8, 2008 10:34 AM
Camera Options
There are several settings associated with the full-color digital camera. These
settings allow you to customize how the camera operates when taking pictures.
To set a camera option:
1. Start the camera. For more information, see "Taking Pictures" on page
77.
2. Press the right softkey
for Options.
3. Select from the following options:
• (1) Self Timer: Allows you to configure a timer for Off, 5 Sec. or 10
Sec.
• (2) Fun Tools: Allows you to select:
Fun Frames: Allows you to select a frame to be placed around the
image before the picture is taken. Press the navigation key left or
right to select the desired frame. Press MENU
to select it and return to
OK
the camera mode.
Color Tones: Allows you to select between several different color
tones including None, Monochrome (black & white), Negative,
Sepia, Green, and Aqua by pressing the navigation key left or right.
When you find the desired tone, press MENU
OK .
• (3) Controls: Allows you to set the Brightness, White Balance, and
Night Shot, and Metering for your pictures.
Brightness: Allows you to set the brightness level. Press the
navigation key left or right to increase or decrease the desired
brightness.
White Balance: Allows you to set up the white balance of the
camera automatically or manually using the different preset modes.
The modes available are:
• Auto: Automatically adjusts the lighting.
• Sunny: Decreases the light sensitivity for taking pictures in full
or mostly sunny conditions.
• Cloudy: Increases light sensitivity for taking pictures under
cloudy conditions.
• Tungsten: Adjusts the white balance to match the inside
lighting conditions displayed using common household light
bulbs.
78 Camera
u440 BMC Guide.book Page 79 Wednesday, October 8, 2008 10:34 AM
• Fluorescent: Adjusts the white balance to match the inside
• Average: Automatically adjusts the lighting.
• Spot: Adjusts the lighting to focus on the centre of the picture.
• (4) Settings: Allows you to change the following camera settings:
Resolution: Your full-color digital camera can take pictures in three
different modes. Each of the modes allow you to increase the zoom
multiple levels, depending on the picture quality setting. This allows
you to get a closer view of the subject or scenery being
photographed. The available sizes are:
• 1.3M: This is the default resolution setting for this camera.
• High (640*480): This is the highest resolution setting available
for this camera, thus allowing you the most image detail.
Images taken at the high setting require more memory to save
than the other modes.
• Med (320*240): The medium setting allows you to take good
quality images without using too much memory.
• Low (220*176): The low setting allows you to take average
quality images. You can save the most images in memory using
this setting.
Tip: While in Camera mode, the zoom feature is available using the navigation key.
Quality: The quality allows you to select between Fine, Normal, and
Economy. These settings reflect the image quality settings for the
pictures.
Shutter Sound: The shutter sound allows you to select between 4
different shutter sounds. The shutter sound is heard when you take
a picture.
Status Bar: The Status Bar can be turned On or Off.
Storage: The default storage for your pictures can be set to your
Phone or Card.
Camera
79
Camera
lighting conditions displayed using common fluorescent
lighting.
Night Shot: Adjusts the camera to take images in dark lighting
conditions.
Metering: Allows you to adjust the lighting conditions. The modes
available are:
u440 BMC Guide.book Page 80 Wednesday, October 8, 2008 10:34 AM
• (5) Review Pictures: Allows you to review pictures currently stored
in your camera’s memory.
Setting the Self-timer
To activate the Self-timer and get yourself in on the picture:
1. With the phone open and in camera mode, press the right softkey
for Options.
2. Select Self Timer.
3. Using the navigation key, highlight the length of delay you want the
timer to use (5 Sec or 10 Sec) and press MENU
OK .
4. Press the left softkey
to start the timer. (A timer is displayed in the
right portion of the main LCD during the Self Timer countdown and the
phone starts beeping.)
5. Get ready for the picture. When the timer is down to 5 seconds, beep
sounds are made.
To cancel the Self Timer after it has started:
• Press
BACK
to cancel.
Note: While the Self timer is active, all keys are disabled except the right softkey
and BACK .
Picture Messaging
Once you’ve taken a picture, it is automatically saved in the camera. You can share
the picture instantly with family and friends. With Picture Messaging, a picture can
be sent to up to ten people at a time using their email addresses or phone numbers
(if their phones are equipped to receive picture messages). For more details, see
"Picture Message" on page 44.
Storing Pictures
To view stored pictures:
1. Press
MENU
OK
for Menu.
2. Select Camera > My Pics.
3. Select In Phone, Memory Card, or Online Albums.
80 Camera
u440 BMC Guide.book Page 81 Wednesday, October 8, 2008 10:34 AM
Your phone can store pictures in three ways:
removable microSD card.
• Online Albums: An online folder provided by your service provider.
Images can be assigned to address book entries, uploaded to online albums, sent
to other users, or printed from your phone.
Note: When pictures are assigned as your screen saver, they are modified to fit the
screen.
When you access either In Phone or Memory Card, the following options are
available when you press the right softkey
:
• Send: Allows you to send the image as a Picture message.
• Upload: Allows you to upload the image to an online album on the web.
(Only available in In Phone and Memory Card.)
• Printer: Allows you to print selected image via a USB cable connected to
your printer.
• Assign: Allows you to assign an image to an address book entry, a screen
saver, or an incoming call.
• Erase: Allows you to erase a single or all of the stored images.
• Copy/Move: Allows you to copy or move the selected image to the memory
card or phone (depending on location of selected image).
• Detail/Edit: Allows you to edit the Text Caption or view Media Info on the
picture.
• Album list: Allows you view the storage locations of your pictures (In
Phone, Memory Card, and Online Albums).
• Camera Mode: Allows you take a picture.
for Expand/Thumbnail to change the aspect of the
Press the left softkey
image between full screen and thumbnail size.
In Phone
Your phone displays a picture immediately after it is taken and stores the image in
the In Phone folder. Pictures stored in your phone can be viewed at any time
without connecting to the web.
Camera
81
Camera
• In Phone: A folder that keeps photos taken through the camera.
• Memory Card: A folder or series of folders that keeps photos on a
u440 BMC Guide.book Page 82 Wednesday, October 8, 2008 10:34 AM
To access the images:
1. Press
MENU
OK
for Menu.
2. Select Camera.
3. Select My Pics.
4. Using the navigation key, select In Phone and press
MENU
OK
.
Online Albums
Online Albums are remote storage spaces that can be accessed using your phone.
The locations can be used to save pictures from your phone.
Creating an Online Album
The first time you use any of the management options involving the Picture
Messaging Web site you will need to establish a Picture Messaging password
through your phone. This password will also allow you to log in to the Picture
Messaging Web site. Please contact your service provider for the web site details
to access and manage your uploaded pictures and albums.
To upload pictures to an online album:
1. Press
MENU
OK
for Menu.
2. Select Camera > My Pics.
3. Select Online Albums. Your phone will connect to the Picture
Messaging Website. Follow the onscreen instructions.
Tip: Write down your Picture Messaging password in a secure place.
To view Online Albums:
1. Press
MENU
OK
for Menu.
2. Select Camera > My Pics.
3. Select Online Albums.
4. Use the navigation key to select the desired album and press
Accessing Online Picture Message Options From Your Phone
1. Select a picture from your online Picture account.
2. Press the right softkey
for Options.
3. To select an option, highlight it and press
82 Camera
MENU
OK
.
MENU
OK
.
u440 BMC Guide.book Page 83 Wednesday, October 8, 2008 10:34 AM
To access your Online Albums options from your phone:
1. Use the navigation key to select an album.
for Options.
3. To select an option, highlight it and press
MENU
OK
Camera
2. Press the right softkey
.
• New Album: Allows you to create a new album.
• Erase Album: Allows you to delete the current album.
• Rename Album: Allows you to rename the current album.
• Album Info: Displays the detailed information associated with the
album.
PictBridge
PictBridge is an industry standard established by the Camera & Imaging Products
Association (CIPA) that enables a range of digital photo solutions including direct
photo printing from a digital camera to a printer without the need for a PC.
Note: There are many PictBridge devices in the market whose compatibility with
the SCH-u440 cannot be guaranteed.
Printing From Your Phone
The SCH-u440 comes equipped with a built-in camera that allows you to print
images directly to a printer using the PictBridge technology. A USB data cable must
be connected between the two devices before any printing can occur.
To use PictBridge to print pictures from your phone:
1. Insert one end of the data cable into the USB slot on the printer. (Printer
must support PictBridge technology.)
2. Press
MENU
OK
for Menu.
3. Select Camera > PictBridge.
4. Insert the data cable into your phone.
5. Read the onscreen “Connect Printer” message and press the left
softkey
for Next.
6. Highlight the desired image and press the left softkey
for Next. (To
select multiple images, press MENU
to place a check mark next to each
OK
image selected.)
Camera
83
u440 BMC Guide.book Page 84 Wednesday, October 8, 2008 10:34 AM
7. Highlight Copies and press the navigation key left or right to select the
desired number of copies to print.
8. Press the navigation key down to select Size. Press the navigation key
left or right to select one of the following sizes:
• 4x6
• Default
Note: These sizes may vary and are dependent on the printer’s capabilities.
9. Press the navigation key up to select Type. Press the navigation key left
or right to select one of the following:
• Standard: Prints the standard image.
• Index: Prints the index information.
Note: These options may vary and are dependent on the printer’s capabilities.
10. Press the navigation key down to select Border. Press the navigation
key left or right to select on or off.
11. Press the navigation key up to select Date Print. Press the navigation
key left or right to select on or off.
12. Press the right softkey
to Preview the image or press the left
softkey
to Print the image.
13. Select Yes to confirm printing and press
MENU
OK
.
Settings and Info
To access the camera’s settings and info:
1. Press
MENU
OK
for Menu.
2. Select Camera > Settings and Info.
3. Select from the following options:
• Auto Save to: The Auto Save to screen allows you to set the default
location to save images taken with the camera to the Phone or
Memory Card.
• Status Bar: The Status Bar screen allows you to set the status bar of
the camera on or off.
84 Camera
u440 BMC Guide.book Page 85 Wednesday, October 8, 2008 10:34 AM
• Account Info: The Account Info screen allows you to check the
Camera
85
Camera
details of your online album(s), such as your account number, the
number of pictures you have uploaded, and comments. Contact your
service provider for more details.
u440 BMC Guide.book Page 86 Wednesday, October 8, 2008 10:34 AM
Bluetooth
Bluetooth is a short-range communications technology that allows you to connect
wirelessly to a number of Bluetooth devices, such as headsets, hands-free car kits,
Bluetooth-enabled handhelds, PCs, and wireless phones. The Bluetooth
communication range is usually up to approximately 10 meters (30 feet).
Note: There are many Bluetooth devices in the market whose compatibility with the
SCH-u440 cannot be guaranteed.
Trusted Devices
Trusted Devices
The Bluetooth pairing process allows you to establish trusted connections between
your phone and another Bluetooth device. When devices are paired, a passkey is
shared between devices, allowing for fast, secure connections while bypassing the
discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Bluetooth.
4. Select Trusted Devices.
5. If no devices are currently listed, press the left softkey
for Add
New. If a device is listed, press the right softkey
for Options > Add
New.
6. Select Search and press MENU
OK . Your phone displays a list of discovered
in-range Bluetooth devices.
7. Select the device you wish to pair with and press the left softkey
for Add to list.
8. Enter the passkey and press
MENU
OK
. The default passkey is 0000.
9. The name of the Bluetooth device is displayed. Press the left softkey
for Save.
10. Highlight the device and press the left softkey
for Connect.
Connection Successful will display if the device is connected properly.
86 Bluetooth
u440 BMC Guide.book Page 87 Wednesday, October 8, 2008 10:34 AM
Enable
Bluetooth
By default, your device’s Bluetooth functionality is turned off. Turning Bluetooth
on makes your device “discoverable” by other in-range Bluetooth devices.
To turn Bluetooth on or off:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Bluetooth.
4. Select Enable.
5. Select On or Off and press
MENU
OK
.
Bluetooth Status Indicators
The following icons show your Bluetooth connection status at a glance:
•
Bluetooth is enabled.
•
Bluetooth is connected.
•
Bluetooth is hidden.
Visibility
The Visibility setting allows you to manage your availability to other Bluetooth
devices.
To configure your phone’s visibility (discoverability) to other Bluetooth devices:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Bluetooth.
4. Select Visibility.
5. Select your desired Visibility setting and press
MENU
OK
:
• Always Visible: To always allow other devices to detect your phone.
• Visible for 3min: To allow other devices one minute before changing
your status to hidden.
• Hidden: To prevent other Bluetooth devices from detecting and
identifying your phone.
Bluetooth
87
u440 BMC Guide.book Page 88 Wednesday, October 8, 2008 10:34 AM
Device Name
Your phone’s Bluetooth name will appear to other in-range Bluetooth devices,
depending on your Visibility settings.
To set a Bluetooth name for your phone:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Bluetooth.
4. Select Device Name.
5. Press and hold
BACK
to clear the current name.
6. Use your keypad to enter a new name and press the left softkey
for Done.
Tip: Give your handset an easily-recognized name so other people can select your
handset quickly in environments where multiple Bluetooth devices are visible.
Device Info
This is a static information display that provides information about your Bluetooth
capability.
To view your Bluetooth information:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Bluetooth.
4. Select Device Info.
5. When you are finished, press the right softkey
for Cancel.
Select Device Type
You can make phone calls using a Bluetooth hands-free headset or car kit. Set the
type of device you are using with the Select Device Type option.
To select the Bluetooth device to connect:
1. Press
MENU
OK
for Menu.
2. Select Tools.
3. Select Bluetooth.
4. Select Select Device Type.
5. Select Handsfree or Headset, and press
88 Bluetooth
MENU
OK
.
u440 BMC Guide.book Page 89 Wednesday, October 8, 2008 10:34 AM
Settings
Display
Settings
Changing the Main Screen
Your new phone offers options for what you see on the display screen when in
standby mode.
To change the Screen Saver:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display > Main Screen.
3. Select Screensaver.
4. Press the navigation key and select Preset Images, My Downloads, or
My Albums. Press the navigation key left, right, up, or down until the
desired image is displayed.
5. Press the left softkey
for Assign.
Changing the Incoming Call display
Your phone allows you to change the image shown on your display screen when
receiving a call.
To select the Incoming Call style:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display > Main Screen.
3. Select Incoming Calls.
4. Select With Caller ID or No Caller ID.
5. Use the navigation key to select Preset Animation, My Downloads, or
My Albums.
• If you selected My Downloads, use the navigation key to select the
desired image and press
MENU
OK
.
• If you selected My Albums, select either In Phone or Memory Card (if
installed). Use the navigation key to select the desired image and
press MENU
OK .
6. Press the left softkey
for Done.
Settings
89
u440 BMC Guide.book Page 90 Wednesday, October 8, 2008 10:34 AM
Changing the Greeting
Your phone allows you to change the greeting shown on your display screen when
it is idle.
To change the greeting on your phone:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display > Main Screen.
3. Select Greeting.
4. Select Custom.
5. Enter your greeting using the keypad.
6. Press the left softkey
for Done
Changing the Outer Screen
Your new phone offers options for what you see on the outer display screen.
To change the Screen Saver:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display > Outer Screen.
3. Select Screen Saver.
4. Press the navigation key and select Preset Images, My Downloads, or
Main LCD Pic. Press the navigation key left, right, up, or down until the
desired image is displayed.
5. Press the left softkey
for Assign.
Changing the LCD Brightness and Contrast
You can change the brightness and contrast of the main and external LCDs, making
the screens brighter or dimmer.
To change the LCD Brightness:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display.
3. Select Brightness.
4. Using the navigation key, increase or decrease the contrast level setting
and press MENU
OK .
90 Settings
u440 BMC Guide.book Page 91 Wednesday, October 8, 2008 10:34 AM
Changing the Backlight Time Length
To change the backlight setting:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display.
3. Select Backlight.
4. Use the navigation key to select Flip open, 30 seconds, 15 seconds, or
8 seconds.
5. Use the navigation key to select the backlight time length.
6. Press
MENU
OK
to save and exit.
Note: Long backlight settings reduce the battery’s talk and standby times.
Changing the Phone’s Menu Style
Your phone allows you to choose how the menu appears on your display screen.
To select the display’s menu style:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display.
3. Select Menu Style.
4. Press the navigation key up or down to select Style 1 or Style 2 and
press MENU
to save and exit.
OK
Changing the Color of your Dialing Font
You can adjust the color of your dialing font so that it appears in color or
monochromatic.
To change the dialing font color:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display.
3. Select Dialing Font.
4. Select Color.
Settings
91
Settings
The backlight setting lets you select how long the display screen and keypad are
backlit after any key press is made.
u440 BMC Guide.book Page 92 Wednesday, October 8, 2008 10:34 AM
5. Press the navigation key up or down to select one of the following and
press MENU
OK :
• Basic: Displays all entered digits in black.
• Monochrome: Displays all entered digits as a single color of your
choice.
• Hyphenate: Displays each block of digits separated by hyphens in a
different color.
6. A sample of the new Dialing Font color appears onscreen.
• If you selected Monochrome, press the navigation key left or right to
select your desired color and press the left softkey
• If you selected any other option, press the left softkey
for Done.
for Done.
Changing the Size of your Dialing Font
You can adjust the size of the digits that appear on screen when dialing a phone
number.
To change the dialing font size:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display.
3. Select Dialing Font.
4. Select Size.
5. Press the navigation key up or down to select Large or Small and press
MENU
to save your changes.
OK
Power Save Mode
You can control how your phone searches for a signal. When Power Save Mode is
on and the signal is lost, the phone periodically searches for a signal, rather than
continuously. This conserves power in areas without a signal.
To change the power save mode:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display.
3. Select PowerSave Mode.
4. Press the navigation key up or down to select On or Off and press
to save your changes.
92 Settings
MENU
OK
u440 BMC Guide.book Page 93 Wednesday, October 8, 2008 10:34 AM
Keypad Light
You can control how long the keypad is illuminated after a key is pressed.
1. Press
MENU
OK
Settings
To change the keypad illumination timing:
for Menu.
2. Select Settings > Display.
3. Select Keypad Light.
4. Press the navigation key up or down to select Flip open, 30 seconds,
15 seconds, 8 seconds, or Off and press MENU
to save your changes.
OK
Language
Your phone can display text in English or French. Language selection changes all
menus and voice message settings.
To change the language on your phone:
1. Press
MENU
OK
for Menu.
2. Select Settings > Display.
3. Select Language.
4. Press the navigation key up or down to select English or French.
5. Press
MENU
OK
to save and exit.
Sounds
Volume
You can set different volumes for the ringer, speakerphone, text messages, picture
mail, voicemail, alarms, and applications.
To adjust the ringer or key tone volume:
1. Press
MENU
OK
for Menu.
2. Select Settings > Sounds.
3. Select Volume.
4. Select Ringer, Earpiece, Headset, Speakerphone, or Advanced.
• Ringer: Press the navigation key up or down until the desired volume
level is selected. Press the left softkey
(vibration). Press MENU
to save and exit.
OK
to turn Vib On or Vib Off
• For the other options, press the navigation key left or right until the
desired volume level is selected. Press
MENU
OK
to save and exit.
Settings
93
u440 BMC Guide.book Page 94 Wednesday, October 8, 2008 10:34 AM
• Select Advanced to set the volume for Alarms, App. Volume, Text
Message, Pic Msg, or Voice Mail. For these options, select Use
Ringer Volume to use the settings assigned to the ringer. Select
Separate Volume to use a custom volume setting. Press the left
softkey
to turn Vib On or Vib Off (vibration). Press MENU
to save
OK
and exit.
Tip: You can adjust the ringer volume in standby mode (or the earpiece volume
during a call) using the volume keys on the side of your phone.
Ringer Type
Ringer types help you identify incoming calls and messages. You can assign ringer
types to individual Contacts entries, types of calls, Scheduler entries, and types of
messages.
• Ring Tones: Include a variety of standard ringer types.
• Melodies: Include a variety of standard musical melodies.
• My Downloads: Ringers include all of the ringtones you have previously
downloaded. See "Downloading Ringers" on page 73.
Selecting Ringer Types
Your phone provides a variety of ringer options that allow you to customize your
ring and volume settings. These options allow you to identify incoming calls by the
ring.
To select a ringer type:
1. Press
MENU
OK
for Menu.
2. Select Settings > Sounds.
3. Select Ringer Type.
4. Select Voice Calls, Messages, Scheduler, or Roam Ringer.
•
•
•
For Voice Calls, select With Caller ID or No Caller ID.
For Messages, select Voicemail, Text Message, or Pic Msg.
For Roaming, select Normal or Distinctive.
5. Press the navigation key left or right to select a Ring Tones, Melodies,
or My Downloads ringer type.
6. Press the navigation key down and then left or right to select the desired
ringer.
94 Settings
u440 BMC Guide.book Page 95 Wednesday, October 8, 2008 10:34 AM
7. Press
MENU
OK
to save and exit.
Alerts
Settings
Your phone can alert you with an audible tone when you change service areas,
once a minute during a voice call, or when a call has been connected.
The different actions available are:
• Minute Beep: An alert tone is sounded every minute that you are
connected.
• Service: An alert tone is sounded when you come in or out of your
coverage area.
• Connect: An alert tone is sounded when you are initially connected.
• Sig Fade Tone: An alert tone is sounded when the signal fades and the
connection is lost. An alert tone is also sounded when your phone partially
loses signal due to network conditions.
• Power On/Off: An alert tone is sounded when your phone is powered On or
Off.
To enable or disable alert sounds:
1. Press
MENU
OK
for Menu.
2. Select Settings > Sounds.
3. Select Alerts.
4. Select Minute Beep, Service, Connect, Sig Fade Tone, Power On, or
Power Off.
5. Select On or Off using the navigation key and press
exit.
MENU
OK
to save and
Key Tone
Your phone offers a number of options for selecting the audible tones
accompanying a key press.
There are three different tones available:
• Xylophone: Musical polyphonic tones are heard when a key is pressed.
• DTMF: Dual tone, multi-frequency beeps are heard when a key is pressed.
• Voice: Polyphonic beep tones are heard when you press a key.
To select a key tone:
1. Press
MENU
OK
for Menu.
2. Select Settings > Sounds.
Settings
95
u440 BMC Guide.book Page 96 Wednesday, October 8, 2008 10:34 AM
3. Select Key Tone.
4. Select Tone Type.
5. Press the navigation key up or down to select the desired tone type.
6. Press
MENU
OK
to save and exit.
Key Tone Level
To adjust the key tone level:
1. Press
MENU
OK
for Menu.
2. Select Settings > Sounds.
3. Select Key Tone.
4. Select Tone Level.
5. Press the navigation key right to increase or left to decrease the volume.
6. Press
MENU
OK
to save and exit.
Tone Length
Your phone offers a number of options for changing the tone duration of a key
press. Voicemail or other automated systems may require long or short time
lengths to activate different features.
To select a tone length:
1. Press
MENU
OK
for Menu.
2. Select Settings > Sounds.
3. Select Key Tone.
4. Select Tone Length.
5. Select Short or Long and press
MENU
OK
to save and exit.
Messaging
See "Messaging" on page 42.
Phone Info
Phone Info
The Phone Info screen displays information about your phone’s current hardware
and software. The Icon Glossary option can help you identify a display icon whose
function you have forgotten. See "Viewing the Display Screens" on page 4 for
definitions of the icons in the Icon Glossary.
96 Settings
u440 BMC Guide.book Page 97 Wednesday, October 8, 2008 10:34 AM
To display information about your phone:
1. Press
MENU
OK
for Menu.
Settings
2. Select Settings.
3. Select Phone Info.
4. Select Phone Number, Icon Glossary, Version, or Advanced.
5. When you are finished, press the left softkey
for Done.
Launch Pad
You have the option of assigning the navigation key to an often-used function. The
center of the navigation key cannot be changed. Pressing the navigation key in
standby mode will launch the assigned feature.
To modify the function launched by the navigation key:
1. Press
MENU
OK
for Menu.
2. Select Settings.
3. Select Launch Pad.
4. Select Up Key, Down Key, Left Key, or Right Key.
5. Press the navigation key up or down to select one of the following
functions:
• Messaging
• Send Message
• Voice Service
• Voice Memo
6. Press
MENU
OK
• Scheduler
• Alarms
• Calculator
• Display
• Ringer
• Calls
• Missed Alerts
to save and exit.
More
Accessibility
TTY Options
See "To turn TTY Mode on or off:" on page 22.
Voice Service
See "Voice Service" on page 33.
Settings
97
u440 BMC Guide.book Page 98 Wednesday, October 8, 2008 10:34 AM
Airplane Mode
Airplane Mode allows you to use many of your phone’s features, such as Games,
Notepad, Voice Memos, etc., when you are in an airplane or any other area where
making or receiving calls or data is prohibited. When your phone is in Airplane
Mode, it cannot send or receive any calls or access online information. All
incoming calls will be sent directly to your voicemail box.
To set your phone to Airplane Mode:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Airplane Mode. (A brief explanation of Airplane Mode will
display.)
4. Press
MENU
OK
to continue.
5. Press the navigation key up or down to select On, Off, or On PowerUp
and press MENU
to save and exit.
OK
While in Airplane Mode, your phone’s standby screen will display “Phone Off.”
Note: 911 and emergency calls cannot be made when the Airplane mode is on.
Call Setup
Call Setup options allow you to set up the following options:
• Auto Answer: Allows you to answer incoming calls automatically with the
optional hands-free car kit.
• Abbrev. Dial: Allows you to program a five or six digit prefix for commonly
used phone numbers. Once enabled, the phone will prepend the prefix to
the 5 or 6 digit number that you have dialed.
• Contacts Match: Allows you to turn On or Off the contact matching feature.
When On, you can dial the last few digits and press
. A list of
Contacts entries appears whose last few digits match the sequence you
dialed.
• Call Answer: Allows you to set up how you answer incoming calls.
Auto Answer
To answer calls when your phone is connected to an optional hands-free car kit
or headset:
1. Press
98 Settings
MENU
OK
for Menu.
u440 BMC Guide.book Page 99 Wednesday, October 8, 2008 10:34 AM
2. Select Settings > More....
3. Select Call Setup.
Settings
4. Select Auto Answer.
5. Press the navigation key up or down to select Yes or No.
6. Press
MENU
OK
to save and exit.
Abbrev. Dial
Abbreviated dialing allows you to program a five or six digit prefix for commonly
used phone numbers. When abbreviated dialing is on, you can enter the last four
or five digits and the handset will prepend the five or six digit prefix to the
sequence you have entered to complete the dialing number.
To set up abbreviated dialing:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Call Setup.
4. Select Abbrev. Dial.
5. Select On or Off and press
MENU
OK
.
6. If you select On, input the five or six digit prefix (for example, area code
and prefix) and press MENU
OK .
Making an Abbreviated Dial Call
1. Enter the last four or five digits of the prefix phone number. Abbrev. Dial
is displayed in the lower left corner with the prefix digits displayed.
2. Press
to make the call.
Call Answer
To set the actions required to answer an incoming call:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Call Setup.
4. Select Call Answer and select one of the following:
• Any key
5. Press
MENU
OK
• Talk key
• Flip Open
to save and exit.
Settings
99
u440 BMC Guide.book Page 100 Wednesday, October 8, 2008 10:34 AM
Contacts Match
With the Contacts Match feature, your phone displays the Contact’s name and
phone number if the incoming call or outgoing call is in your Contacts list.
To set up Contacts Match:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Call Setup.
4. Select Contacts Match.
5. Select On or Off and press
MENU
OK
.
Making a call using Contacts Match:
1. Dial the last few digits of the desired number and press
. A list of
Contact entries appear whose last few digits match the sequence you
dialed.
2. Use the up or down navigation key to select the Contact you want to call
and press
.
Note: If there is more than one Contact entry that matches the last four or five
digits, a list is displayed that allows you to select the desired number to call.
Headset Mode
Headset Mode directs audio to either the headset exclusively or to both the headset
and the phone’s speaker. There are two options:
• Turbo Button: The ringer is routed through both the headset and the
phone’s speaker. The turbo button can be turned On or Off.
• Ringer Sound: All audio is routed through the Handset Only or Headset
Only. The phone’s ringer will not ring.
Note: This feature works with the wire headset and does not work with the
Bluetooth headset.
To change the Headset Mode:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
100 Settings
u440 BMC Guide.book Page 101 Wednesday, October 8, 2008 10:34 AM
3. Select Headset Mode.
4. Select Ringer Sound.
MENU
OK
.
Key Guard
The Key Guard feature helps to prevent accidental key presses when the handset
is in your pocket or purse. When the Key Guard is on, the buttons are disabled
until the handset is flipped open. There are three settings available:
• Flip-closed: Activates Key Guard as soon the handset is flipped closed.
This will prevent you from taking pictures with the handset closed.
• After 5 seconds: Activates Key Guard five seconds after the handset is
closed.
• Off: Deactivates the Key Guard feature.
To change the Key Guard setting:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Key Guard.
4. Select Flip-closed, After 5 seconds, or Off.
Location
Your phone is equipped with a Location feature for use with location-based
services that may be available in the future.
The Location feature allows the network to detect your position. Turning Location
off will hide your location from everyone except 911.
Note: Even if the Location feature is enabled, no service may use your location
information without your express permission.
To enable your phone’s Location feature:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Location. (A brief explanation will display. Use the navigation key
to scroll through to read the entire text.)
4. Press the navigation key up or down to select On or Off.
5. Press
MENU
OK
to save and exit.
Settings
101
Settings
5. Select either Handset Only or Headset Only and press
u440 BMC Guide.book Page 102 Wednesday, October 8, 2008 10:34 AM
When the Location feature is on, your phone’s standby screen will display the
icon. When Location is turned off, the
icon will display.
Roaming
For more information, see "Roaming" on page 23.
Restrict and Lock
For more information, see "Phone Security" on page 103.
Security
For more information, see "Phone Security" on page 103.
102 Settings
u440 BMC Guide.book Page 103 Wednesday, October 8, 2008 10:34 AM
Phone Security
All of your phone’s security settings are available through the Security menu. You
must enter your lock code to view the Security menu.
To access the Security menu:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Security.
4. Enter your lock code. (The security menu is displayed.)
Tip: If you cannot remember your lock code, try using the last four digits of either
your Social Insurance Number or Phone Number or try 0000. If none of these
work, call Customer Service at 1-800-SAMSUNG.
Using Your Phone’s Lock Feature
Locking Your Phone
When your phone is locked, you can only receive incoming calls or make calls to
911, Customer Service, or special numbers.
To lock your phone:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Restrict and Lock.
4. Select Lock my Phone.
5. Enter your lock code.
6. Using the navigation key, select Unlocked, On Power Up or Lock Now,
and press MENU
OK .
Unlocking Your Phone
To unlock your phone:
1. Press
MENU
OK
for Menu.
2. Enter your lock code.
Phone Security
103
Phone Security
Accessing the Security Menu
u440 BMC Guide.book Page 104 Wednesday, October 8, 2008 10:34 AM
Changing the Lock Code
To change your lock code:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Security.
4. Enter your lock code.
5. Select Change Lock.
6. Enter your new lock code and press the left softkey
new lock code must have 4 digits.
for Next. Your
7. Re-enter your new lock code and press the left softkey
for Done.
Calling in Lock Mode
You can place calls to 911 and to your special numbers when in lock mode.
To place an outgoing call in lock mode:
• To call an emergency number or special number, enter the phone number
and press
.
• To place normal outgoing calls, press
MENU
to display the lock code screen.
OK
Enter your lock code. Enter the desired phone number and press
.
Locking/Unlocking Your Camera
When your camera is locked, you must enter your lock code before taking any
pictures or viewing stored pictures.
To lock/unlock your phone:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Restrict and Lock.
4. Select Camera/Pictures.
5. Enter your lock code.
6. Using the navigation key, select On or Off, and press
MENU
OK
.
Restricting Voice Calls
You can restrict your incoming and outgoing calls to Allow all, Contacts only, or
Special# only.
104 Phone Security
u440 BMC Guide.book Page 105 Wednesday, October 8, 2008 10:34 AM
To restrict voice calls:
MENU
OK
for Menu.
Phone Security
1. Press
2. Select Settings > More....
3. Select Restrict and Lock.
4. Select Voice.
5. Enter your lock code.
6. Select Restrict.
7. Select Outgoing Call or Incoming Call.
8. Using the navigation key, Allow all, Contacts only, or Special# only,
and press MENU
OK .
Locking/Unlocking Your PhoneBook
You can lock your phonebook so that contacts cannot be added, edited, or deleted.
To lock/unlock voice calls:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Restrict and Lock.
4. Select Voice.
5. Enter your lock code.
6. Select Restrict.
7. Select Lock PhoneBook.
8. Using the navigation key, select On or Off, and press
MENU
OK
.
Using Special Numbers
You can save up to three special numbers in addition to your Contacts entries (the
same number may be in both directories). You can make and receive calls from
special numbers even when your phone is locked.
To add or replace a special number:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Security.
4. Enter your lock code.
Phone Security
105
u440 BMC Guide.book Page 106 Wednesday, October 8, 2008 10:34 AM
5. Select Special #.
6. Select entry one, two, or three and press
7. Press and hold
BACK
MENU
OK
.
to clear the existing number.
8. Enter the number using the keypad.
9. Press
MENU
OK
to save and exit.
Note: There are no Speed Dial options associated with special numbers.
Erasing Phone Data
You can erase different categories of saved data from your phone. Once deleted,
they cannot be recovered.
To erase saved data from your phone:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Security.
4. Enter your lock code.
5. Select Erase.
6. Select from the following options:
• Erase Contacts. This erases all the names and phone numbers in
your Contacts list.
• Erase Downloads. This option deletes all saved downloaded content
from the phone, including games, ringers, screen savers, and
applications.
• Erase Pic. This option clears all the photos you have taken.
• Erase Messages. This option clears all your text, pic/video
messages, and voice mail.
7. Using the navigation key, select Yes again to confirm and press
permanently delete.
Resetting Your Picture Account
Resetting your picture account restores all the factory defaults.
To reset your picture account:
1. Press
MENU
OK
for Menu.
106 Phone Security
MENU
OK
to
u440 BMC Guide.book Page 107 Wednesday, October 8, 2008 10:34 AM
2. Select Settings > More....
Phone Security
3. Select Security.
4. Enter your lock code.
5. Select Erase.
6. Select Reset Picture Account.
7. Using the navigation key, select Yes to confirm and press
phone will reset.
MENU
OK
. Your
Default Setting
Resetting the phone restores all the factory defaults, including the ringer types
and display settings. The Contacts, Call History, Scheduler, and Messaging are not
affected.
To restore the default settings on your phone:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Security.
4. Enter your lock code.
5. Select Erase.
6. Select Default Setting.
7. Using the navigation key, select Yes and press
MENU
OK
.
8. Using the navigation key, select Yes again to confirm and press
Your phone will reset.
MENU
OK
.
Resetting Your Phone
Resetting the phone restores all the factory defaults, including the ringer types and
display settings. The Contacts, Call History, Scheduler, and Messaging are not
affected.
To reset your phone:
1. Press
MENU
OK
for Menu.
2. Select Settings > More....
3. Select Security.
4. Enter your lock code.
5. Select Erase.
Phone Security
107
u440 BMC Guide.book Page 108 Wednesday, October 8, 2008 10:34 AM
6. Select Reset Phone.
7. Using the navigation key, select Yes and press
MENU
OK
.
8. Using the navigation key, select Yes again to confirm and press
Your phone will reset.
108 Phone Security
MENU
OK
.
u440 BMC Guide.book Page 109 Wednesday, October 8, 2008 10:34 AM
Safety
Getting the Most Out of Your Reception
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from
0.006 watts to 0.2 watts in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the
American National Standards Institute (ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to human exposure to RF signals. More than
120 scientists, engineers and physicians from universities, government health
agencies, and industries developed this updated standard after reviewing the
available body of research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August 1996, the FCC
adopted a hybrid standard consisting of the existing ANSI/IEEE standard and the
guidelines published by the National Council of Radiation Protection and
Measurements (NCRP).
Safety
109
Safety
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal strength in
your area. Your phone informs you of the current signal strength by displaying a
number of bars next to the signal strength icon. The more bars displayed, the
stronger the signal. If you’re inside a building, being near a window may give you
better reception.
u440 BMC Guide.book Page 110 Wednesday, October 8, 2008 10:34 AM
Maintaining Your Phone’s Peak Performance
There are several simple guidelines for operating your phone properly and
maintaining safe, satisfactory service.
• Hold the phone with the antenna raised, fully-extended, and over your
shoulder.
• Try not to hold, bend, or twist the phone’s antenna.
• Don’t use the phone if the antenna is damaged.
• Speak directly into the mouthpiece.
• Avoid exposing your phone and accessories to rain or liquid spills. If your
phone does get wet, immediately turn the power off and remove the battery.
If it’s inoperable, return it to a dealer store or call Customer Support for
service.
Note: For the best care of your phone, only authorized personnel should service
your phone and accessories. Faulty service may void the warranty.
Maintaining Safe Use of and Access to Your Phone
Failure to follow the instructions outlined may lead to serious personal injury and
possible property damage.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a hands-free
device) is prohibited in some jurisdictions. Laws vary as to specific restrictions.
Remember that safety always comes first.
When using your phone in the car:
• Get to know your phone and its features, such as speed dial and re-dial.
• When available, use a hands-free device.
• Position your phone within easy reach.
• Let the person you are speaking to know you are driving. If necessary,
suspend the call in heavy traffic or hazardous weather conditions.
• Do not take notes or look up phone numbers while driving.
• Dial sensibly and assess the traffic. If possible, place calls when stationary
or before pulling into traffic.
• Do not engage in stressful or emotional conversations that may divert your
attention from the road.
• Dial 911 to report serious emergencies. It’s free from your wireless phone.
110 Safety
u440 BMC Guide.book Page 111 Wednesday, October 8, 2008 10:34 AM
• Use your phone to help others in emergencies.
• Call roadside assistance or a special non-emergency wireless number
when necessary.
To operate your phone safely and efficiently, always follow any special regulations
in a given area. Turn your phone off in areas where use is forbidden or when it
may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, RF signals from wireless phones may affect inadequately shielded
electronic equipment.
RF signals may affect improperly installed or inadequately shielded electronic
operating systems and/or entertainment systems in motor vehicles. Check with the
manufacturer or their representative to determine if these systems are adequately
shielded from external RF signals. Also check with the manufacturer regarding any
equipment that has been added to your vehicle.
Consult the manufacturer of any personal medical devices, such as pacemakers
and hearing aids, to determine if they are adequately shielded from external RF
signals.
Note: Always turn off the phone in health care facilities and request permission
before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible interference
with aircraft systems, U.S. Federal Aviation Administration (FAA) regulations
require you to have permission from a crew member to use your phone while the
plane is on the ground. To prevent any risk of interference, FCC regulations prohibit
using your phone while the plane is in the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off your phone when in a blasting
area or in other areas with signs indicating that two-way radios should be turned
off. Construction crews often use remote-control RF devices to set off explosives.
Safety
111
Safety
Following Safety Guidelines
u440 BMC Guide.book Page 112 Wednesday, October 8, 2008 10:34 AM
Turn off your phone when you are in an area with a potentially explosive
atmosphere. Although it is rare, your phone or its accessories could
generate sparks. Sparks could cause an explosion or a fire resulting in
bodily injury or even death. These areas are often, but not always,
clearly marked.
These areas include:
• Fueling areas such as gas stations.
• Below deck on boats.
• Fuel or chemical transfer or storage facilities.
• Areas where the air contains chemicals or particles such as grain, dust, or
metal powders.
• Any other area where you would normally be advised to turn off your
vehicle’s engine.
Note: Never transport or store flammable gas, liquid, or explosives in the
compartment of your vehicle that contains your phone or its accessories.
Restricting Children’s Access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone, dial 911 by mistake, or make
calls that increase your phone bill.
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s
performance.
• Use only Samsung approved batteries and desktop chargers. These
chargers are designed to maximize battery life. Using other batteries or
chargers voids your warranty and may cause damage.
• In order to avoid damage, charge the battery only in temperatures that
range from 32º F to 113º F (0º C to 45º C).
• Don’t use the battery charger in direct sunlight or in high humidity areas,
such as the bathroom.
• Never dispose of the battery by incineration.
• Keep the metal contacts on top of the battery clean.
112 Safety
u440 BMC Guide.book Page 113 Wednesday, October 8, 2008 10:34 AM
• Don’t attempt to disassemble or short-circuit the battery.
• The battery may need recharging if it has not been used for a long period of
time.
performance. When used correctly, the battery can be recharged hundreds
of times before it needs replacing.
• Don’t store the battery in high temperature areas for long periods of time.
It’s best to follow these storage rules:
• Less than one month:
-4º F to 140º F (-20º C to 60º C)
• More than one month:
-4º F to 113º F (-20º C to 45º C)
Disposal of Lithium Ion (LiIon) Batteries
For safe disposal options of your LiIon batteries, contact your nearest BMC service
center.
Special Note: Be sure to dispose of your battery properly. In some areas, the
disposal of batteries in household or business trash may be prohibited.
Note: For safety, do not handle a damaged or leaking LiIon battery.
Acknowledging Special Precautions and Industry Canada Notice
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas, and chargers. The
use of any unauthorized accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending, or sitting on it.
Information to User
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
Safety
113
Safety
• It’s best to replace the battery when it no longer provides acceptable
u440 BMC Guide.book Page 114 Wednesday, October 8, 2008 10:34 AM
guarantee that interference will not occur in a particular installation; if this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient/relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: At very high volumes, prolonged listening to a headset can damage your
hearing.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed
in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring, and
calculation process. It does not represent how much RF the phone emits. All phone
models are tested at their highest value in strict laboratory settings. However, when
in operation the SAR of a phone can be substantially less than the level reported to
the FCC. This is because of a variety of factors including its proximity to a base
station antenna, phone design, and other factors. What is important to remember
is that each phone meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial
margin of safety. As stated above, variations in SAR values between different model
phones do not mean variations in safety. SAR values at or below the federal
standard of 1.6 W/kg are considered safe for use by the public.
The highest reported SAR values of the SCH-u440 are:
CMDA mode (Part 22)
Head: 1.21 W/Kg : Body-worn: 0.689 W/Kg
PCS mode (Part 24)
PCS: Head: 1.13 W/Kg : Body-worn: 0.468 W/Kg
114 Safety
u440 BMC Guide.book Page 115 Wednesday, October 8, 2008 10:34 AM
Owner’s Record
Model: SCH-u440
Serial No.:
User Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or more of
the following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
Safety
115
Safety
The model number, regulatory number, and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the space
provided below. This will be helpful if you need to contact us about your phone in
the future.
u440 BMC Guide.book Page 116 Wednesday, October 8, 2008 10:34 AM
Manufacturer’s Warranty
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG Electronics Canada Inc. ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's phones and accessories ("Products") are free from defects in material
and workmanship under normal use and service for the period commencing upon the date of purchase and
continuing for the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/Pouch/Holster
90 Days
Game Pad
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This
Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect,
unusual physical, electrical or electromechanical stress, or modification of any part of Product, including
antenna, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) any
plastic surfaces or other externally exposed parts that are scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation,
maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product; or (g) Product
used or purchased outside Canada. This Limited Warranty covers batteries only if battery capacity falls below
80% of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if: (i) the battery
has been charged by a battery charger not specified or approved by SAMSUNG for charging the battery; (ii) any
of the seals on the battery are broken or show evidence of tampering; or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must return Product to an authorized phone service facility in an
adequate container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of
sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung Customer Care at 1-800-Samsung. Upon receipt,
SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/replaced leather cases, pouches and holsters will be warranted
for a period of ninety (90) days. All other repaired/replaced Products will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts, shipping,
and labor charges for the repair or return of such Product.
116 Manufacturer’s Warranty
u440 BMC Guide.book Page 117 Wednesday, October 8, 2008 10:34 AM
·
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
·
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
·
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
·
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
·
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES
AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED
TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY
DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT
OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL
OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH
VARY FROM PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND SHALL BE PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY
WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
Manufacturer’s Warranty
117
Manufacturer’s
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY
OR REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
u440 BMC Guide.book Page 118 Wednesday, October 8, 2008 10:34 AM
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this
Limited Warranty, or make additional warranties binding on SAMSUNG. Accordingly, additional statements such
as dealer advertising or presentation, whether oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Samsung Electronics Canada, Inc.
©2008 Samsung Electronics Canada, Inc. SAMSUNG is a registered trademark of Samsung Electronics Co.,
Ltd. and its related entities.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
#861826 v2 | 4032342
118 Manufacturer’s Warranty
u440 BMC Guide.book Page 119 Wednesday, October 8, 2008 10:34 AM
Index
A
Selecting a Character Input Mode
Abbreviated Dialing 17
Activating Voice Service 33
Air Time 71
Airplane Mode 98
Alerts 95
Auto Answer 98
19
Symbols and Numbers 20
Erasing Text Messages 44
F
Font
Changing the color 91
Changing the size 92
B
Backlight 91
Backlight Brightness 90
Backlight Contrast 90
Battery
Capacity 8
Charging 10
Disposal 113
Installing 9
Bluetooth 86–88
C
Call Answer 99
Call History 69
Erasing 71
Making a Call From 70
Options 69
Prepending a Phone Number 71
Saving a Phone Number From 70
Viewing 69
Call Waiting 21
Caller ID 20
Camera 77–80
Camera Options 78
Storing Pictures 80
Taking Pictures 77
I
Icon Glossary 4, 97
K
Key Tone 95
L
Locking Your Phone 103, 104,
105
M
Mail Kit
Message Setup Options 47
Making Calls 13
Menus
Diagram 27
Navigation 25
Viewing 27
Messaging 42
Missed Call Notification 14
N
Name Lookup 35
Navigating Menus 25
D
O
Display 89
Displaying Your Phone Number
13
Online Albums 82, 85
P
PCS Services
E
Call Waiting 21
Entering Text
Alpha Mode 19
Phone Book
Adding Entries 53
Index 119
u440 BMC Guide.book Page 120 Wednesday, October 8, 2008 10:34 AM
Calling a Number From 18
Editing Entries 53
Erasing 106
Finding Entries 53
Phone Info 96
Phone Number 13, 97
Phone Numbers
Saving 16
With Pauses 17
PictBridge 83
Picture Message 44
Picture Messages
Storing 80
Pictures - Storing 80
Voice Service Settings 36
Voicemail
Clearing 47
Notification 46
Retrieving 47
Setting Up 46
Volume 93
W
Web
Applications 76
Downloading Items 73
Games 75
Screen Savers 74
Wireless Web
R
Resetting Your Phone 107
Restricting Calls 104
Ringer Types 94
Roaming 23
Other Digital Networks 23
S
Security Menu 103
Sound 93
Special Numbers 105
Speed Dialing 18
T
Text Messaging 42
Three-Way Calling 21
Tools 57
TTY Use 22
Turning Your Phone On and Off 8
U
Unlocking Your Phone 103
V
Voice Adaptation 37
Voice Dial
Changing Voice Dial Prompts 38
Voice Dial Confirmation 36
Voice Memo 67
Voice Recognition
Digit Dial 33
120 Index
Launching the Web 39
Navigating 40
Ringers 73
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement