Central Loading Systems Dri-Air’s central loading systems are ideal for hopper, press and

Central Loading Systems Dri-Air’s central loading systems are ideal for hopper, press and
Central Loading Systems
Central Loading Systems
Reliable, quiet operation
A high pressure, reliable
regenerative blower provides years
of trouble free service. Quiet
operation allows you to locate the
blower in a wide range of locations
without an expensive sound
enclosure.
With the pump, filter and control panel
on a common floor frame loading
systems are ready to install, without
the need of outside installation teams
saving you time and money on start
up.
Difficult, moisture sensitive materials
are not a problem with our optional
closed loop dry-air conveyance with
line purge…keeping material lines
clear and resin moisture free!
Dri-Air’s central loading
systems are ideal for
hopper, press and
blender loading
Conveying power where you
need it while eliminating
maintenance prone brush
type hopper loaders or
expensive to operate
compressed air loaders
Sealed system keeps dust
and fines in the filter and not
through out your plant!
Central pump with filter &
control panel
CL features
Model
DP-3
DP-5
HP
3
5
CFM
156
216
Overall Dimensions
30" x 18" x 55"H
30" x 18" x 55"H
Line Size
1.5"
2.0"
Filter Type Noise Level
3 bag
69 db
5 bag
72 db
Dri--Shot Receivers
Dri
Dri-Shot Receivers include
an internal flap for flexible
mounting options on drying
hoppers or machines.
Standard features include an
internal pellet screen and
stainless steel construction
Dust and fines are contained in the
easy clean filter, not throughout your
plant! Tool free filter access through
quick release clamps. Compressed air
blow off for reduced filter maintenance.
Control box for on / off
control at the press is
included. Cable and
connector for quick in field
wiring to sequence t valve
Model
DS-1
DS-2
DS-3
Receiver Capacity
.1 cubic ft
.4 cubic ft
1 cubic ft
Sight Glass Capacity
2 lbs
2 lbs
2 lbs
Overall Dimensions
21" x 7.5"
26" x 11"
12" x 36"
Central Loading Systems
Central Control Panel
Simple, low cost installation
24 volt system eliminates the need
for running expensive conduit as
wiring is through low voltage 6
conductor cable. The color touch
screen shows the operator at a
glance receiver status: on, off,
filling or alarm.
Fill times, no fill alarms and receiver
activation are set up through easy to
navigate set up screens
Our DC-4 touch key control provides
an economical solution for loading
blenders for not much more money
then maintenance prone, brush type
hopper loaders. Contact us or your
local representative today to find out
more!
Choose from our easy to
use touch screen control
systems, or our
economical 4 station
touch key panel.
From 1 station to 10,
Dri-Air control panels
will provide easy,
straightforward
operation for loading,
hoppers, machines or
blenders.
Color touch screen
Sequence Valves
Sequence valves include:
• “T” for installation in vacuum line or a
common manifold for blender / hopper
bank applications
• Junction box with terminal strip for
quick in the field wiring
• 24 V Solenoid valve for valve operation
• Proximity switch cable with connector
for connection to receiver
• Available in 1.5” or 2” line sizes
• LED indicators for solenoid actuation
Touch screens for
easy navigation
Model
DC-4
DC-6
DC-10
# of stations
4
6
10
# of pumps
1
1
1
Overall Dimensions Screen Size
n/a
16" x 16" x 8.5"
5.7
16" x 16" x 8.5"
5.7
16" x 16" x 8.5"
16 Thompson Road, E Windsor, CT 06088
phone: 860.627.5110
[email protected] web: www.dri-air.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement