1 Audio/Video - Distribution Audio/Video Baluns HDMI Over Cat5e Balun Set HDMI 1x2 Splitter/Cat5 Extender Set HDMI/Ethernet Extender Set HDBaseT extender set consists of a transmitter and receiver that will allow full 1080p and 3D HDMI signal to be sent up to 300' over a single run of Cat5e or Cat6 cable. It also provides an IR path that supports 38KHz IR control and 100Mbps Ethernet to be sent as well, all over the same single cable. Features: •HDMI 1.4 and HDCP compliant, supports 3D •Compatible with all digital audio formats •Remote mount IR emitter included •Acts as an Ethernet hub •Four Ethernet ports, two on receiver, two on transmitter, any of which can be used as the input •Requires 5VDC at each end, two AC adapters included MCM Part # 33-12550 MCM Part # 50-15005 ONLY $119.00 ONLY $249.00 HDMI Over Cat5 Extender Set Active HDMI balun allows full HD audio and video to be transmitted over a single Cat5e or Cat6 cable, up to 160'. It is ideal for situations requiring long HDMI cable runs, or retrofit applications where Cat5 cable may already exist. Features: •HDMI 1.2a compliant •Supports 24 bit Deep Color and 1080p resolution •Auto equalization •Rugged metal housing with gold plated connectors •Dimensions (each unit): 1" (H) x 2.5" (W) x 3.9" (D) •Requires 5VDC, two AC adapters included •Sold as a set MCM Part # 50-15000 Complete set consists of one HDMI to Cat5 transmitter, and two Cat5 to HDMI receivers, allowing a single source to send high definition video up to 160' to two video monitors. Features: •HDMI 1.2a compliant •Supports 24 bit Deep Color and 1080p resolution •Auto equalization •Rugged metal housing with gold plated connectors •Dimensions (transmitter): 1" (H) x 4.0" (W) x 3.9" (D) •Dimensions (each receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires 5VDC, three AC adapters included •Sold as a set of one transmitter and two receivers ONLY $79.99 Active sender/receiver set allows HDMI signals to be carried over two runs of Cat5e cable at distances of up to 180'. Additionally, this set provides a path for IR signals, allowing control of source gear from the remote location. Features: •Meets HDMI V1.4 standards, including 3D •Fully HDCP compliant •Cable skew adjustment •Compatible with 38KHz and 56KHz IR systems •1080i/60Hz up to 180' •1080p/60Hz up to 98' •Needs power source only at receiver end •Includes IR target and dual head emitters •Requires 12VDC, 500mA, AC adapter included MCM Part # 33-12570 ONLY $79.99 HDMI Wall Plate Balun Set with IR Support HDMI 1x8 Splitter/Cat5 Extender Set Complete set consists of one HDMI to Cat5 transmitter, and eight Cat5 to HDMI receivers, allowing a single source to send high definition video up to 160' to eight video monitors. Features: •HDMI 1.2a compliant •Supports 24 bit deep color and 1080p resolution •Auto equalization •Rugged metal housing with gold plated connectors •Dimensions (transmitter): 1.8" (H) x 17.3" (W) x 7.9" (D) •Dimensions (each receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires 5VDC, nine AC adapters included •Sold as a set of one transmitter and eight receivers MCM Part # 50-15015 The UBW-HDMI balun system is specifically designed to transmit an HDMI signal at resolutions up to 1080p via two Cat 5e or Cat 6 wires up to 80'. System also features an included infrared receiver and emitter, allowing IR transmission via the same Cat 5e or Cat 6 cables. Features: •HDCP compliant •Supports HDMI 1.2 •White decora style wall plates •Supported resolutions: 480i/p, 576i/p, 720p and 1080i/p •Infrared receiver and emitter included. •Powered by the HDMI system •Optional 5 VDC power supply is supported (2.1mm DC power input) in rare instances the connecting device cannot supply enough power •LED status indicators •Audio support: Dolby True HD, Dolby Digital Plus, DTS HD Master Audio, & DTS HD High Resolution MCM Part # 33-11260 ONLY $119.00 ONLY $299.00 HDMI 1x4 Splitter/ Cat5 Extender Set Complete set consists of one HDMI to Cat5 transmitter, and four Cat5 to HDMI receivers, allowing a single source to send high definition video up to 160’ to four video monitors. Features: •HDMI 1.2a compliant •Supports 24 bit Deep Color and 1080p resolution •Auto equalization •Rugged metal housing with gold plated connectors •Dimensions (transmitter): 1.6" (H) x 10.6"(W) x 7.1" (D) •Dimensions (each receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires 5VDC, five AC adapters included •Sold as a set of one transmitter and four receivers MCM Part # 50-15010 214 ONLY $179.99 Active HDMI Extender Balun II Kit HDMI Category 5 Cable Extender Kit HDMI extender utilizes two Cat 5e or Cat 6 cables to extend an HDMI signal to distances up to 100'. Features: •Supports up to 1080p resolution •Supports 24bit deep color •Supports uncompressed LPCM audio •DTS and Dolby® Digital support •HDMI 1.2a compliant •HDCP pass through •Passive device, no power supply required MCM Part # 33-11640 ONLY $39.99 www.MCMelectronics.com /1-800-543-4330 These items allow HDMI equipment to be connected at distances up to 300' via two Cat5E/6 cables with up to 1080i resolution, or 1080p deep color up to 150'. It is ideal for digital signage, residential, boardroom, classroom, and medical imaging video systems. Complete kit includes transmitter, receiver and power supply, IR target and emitter. Items sold individually to support use with other components and hubs. MCM Part # 33-11445 33-11450 33-11455 33-11485 Mfr. # 500405 500406 500407 500999 Type (1–3) (4–up) Complete kit $389.00 $369.55 Transmitter 185.00 175.75 Receiver 209.00 198.55 IR receiver 21.19 20.13 Follow us on: & Distribution - Audio/Video #33-12410 #33-12400 HDMI 1.4 Passive Extender Kit HDMI 3 x 1 Switcher and Extension Kit The HDMI 3 x 1 switcher kit allows up to three different HDMI sources to be connected to one HDMI display via two Cat 5e unshielded twisted-pair cables in a point-to-point configuration. Push-button input selection is located on the receiver unit. The kit includes one transmitter and one receiver, and supports up to 100' (30m) at 1080p via Cat 5e cable (supports deep color up to 1080i). Mfr. #500410. MCM Part # 33-10580 ONLY $365.00 Back Active HDMI Extender Set Back HDMI extender sets consist of a transmitter and receiver that will allow full 1080p and 3D HDMI signal to be sent up to 164' over two runs of Cat 5e cable. Additionally, this set provides an IR path that supports 38KHz IR control to be sent as well. Features: •HDCP compliant, supports 3D, 4K x 2K •Distance extends to 180' with Cat 6 cable •Compatible with 7.1 and all digital audio formats •5VDC required at receiver end only, AC adapter included •Available in free standing and wall plate versions •IR target and emitter sold separately MCM Part # 33-12400 33-12410 50-14615 50-14616 HDMI 1.3 Balun Set with IR Support Description Free standing set Wall plate set IR emitter IR target #33-12405 ONLY $425.00 Back Back HDMI Extender Set HDMI Extender Kit The VideoEase Econo Plus extender kit allows HDMI equipment to be connected up to 150' via two Cat5e unshielded twisted pair cables at 1080p resolution, and supports 1080p deep color up to 90' via dual Cat6 cable. Transmission lengths: •1080p: 150' via dual Cat5e, 200' via dual Cat6 •1080i/720p: 200' via dual Cat5e, 250' via dual Cat6 •Mfr. #500401 MCM Part # 33-10576 ONLY $219.00 HDMI extender sets consist of a transmitter and receiver that will allow full 1080p and 3D HDMI signal to be sent up to 100' over two runs of Cat 6 cable. Additionally, this set provides an IR path that supports 38KHz IR control to be sent as well. Features: •HDCP compliant, supports 3D, 4K x 2K •Compatible with 7.1 and all digital audio formats •No external power required •Available in free standing and wall plate versions •IR target and emitter sold separately MCM Part # 33-12405 33-12415 50-14615 50-14616 Description Free standing set Wall plate set IR emitter IR target The HDMI Passive Extender Kit (500402) allows HDMI equipment to be connected up to 100' (30m) via two Cat5e unshielded twisted pair cables in a point-to-point configuration at 1080p resolution. The product also works with 1080p up to 150' (45m) via Cat6 cables. The kit comes with one transmitter and one receiver. Features: •HDMI 1.4 •Up to 150' (45m) @ 1080p Cat6 •Up to 100' (30m) @ 1080p Cat5e •No external power required •Includes one transmitter and one receiver MCM Part # 33-12775 ONLY $149.99 ONLY $129.00 139.00 9.50 9.50 #33-12415 Includes everything you need to connect HDMI equipment at distances up to 330' at 1080p deep color via a single CAT5e/6 cable, and also receives and transmits an IR signal Kit includes: •Transmitter, receiver, 12VDC power supplies, IR emitter and IR receiver •Mfr. #500450 MCM Part # 33-11250 1 HDMI Over Two Category 5e/ Category 6 Wall Plate Balun Set HDMI balun kit includes both the transmitter and the receiver, and allows you to transmit an HDMI audio/video signal at distances up to 150' at 1080p resolution using two Cat 5e/Cat 6 cables. Decora style wall plates are designed to fit in any decor. Features: •HDMI 1.3 and HDCP compliant •480i/p transmission distance: 300' (Cat 5e and Cat 6) •720p/1080i transmission distance: 200' (Cat 5e), 250' (Cat 6) •1080p 8-bit: 150' (Cat 5e), 200' (Cat 6) •1080p 12-bit deep color: 90' (Cat 6) •Required power: 12VDC (adapter included) •Dimensions: 4.1" (H) x 1.8" (W) x 1.4" (D) MCM Part # 33-11255 ONLY $219.00 ONLY $89.99 99.99 9.50 9.50 HDMI Repeater/ Extender HDMI 1.3 Balun Set Provides improved reliablity of HD signal transfer on long distances of HDMI cable. Features: •Locate at receiver end of the cable •Extends up to 100' total distance •Fully plug and play •Supports resolutions up to 1080p •Dimensions: 0.6" (H) x 1.9" (W) x 1.1" (D) •Powered from HDMI signal cable, no external power required Capable of transmitting video signals at resolutions up to 1080p up to 328', this balun set also accepts input from an infrared receiver and transmits the signal via the same CAT5e/6 cable. Features: •Can also transmit RS-232 (DB9 connections) up to 115.2kbps •3D ready •Bi-directional RS232 and IR signals •Maximum data rate: 3.4Gbps •Audio transmission supports Dolby TrueHD, DTS-HD MA •Mfr. #HM1CK-3 MCM Part # 33-12725 MCM Part # 33-11200 ONLY $17.99 www.MCMelectronics.com /1-800-543-4330 ONLY $519.12 215 1 Audio/Video - Distribution VideoEase™ HDTV Component Video/Digital Audio Balun NEW! HDMI over Single Cat5e Balun The HX1K-3 sends a 1080p HDMI signal at distances up to 328' via a single CAT5e/Cat6 cable. Features: •HDMI 1.3 and HDCP compliant •3D ready •Sends uncompressed HD video •Maximum data rate: 3.4Gbps •Full audio pass through •HDBaseT™ technology MCM Part # 33-11540 ONLY $493.37 VideoEase™ Component/Composite Video Balun These baluns send Y/Pb/Pr component video, plus one composite video signal over Cat5E/6 cable up to 500' for 1080i and 1,000' for 480p. It is ideal when multiple video sources, such as a digital cable box and old style video game, are located remotely from the viewing monitor. Models are available with female RCA connectors, or male RCA's on 6" pigtails. •Baluns must be used in pairs and are sold individually MCM Part # Mfr. # Type (1–3) (4–up) 33-11380 500056 Female RCA's $68.99 $65.54 33-11385 500057 Male RCA pigtails 68.99 65.54 HDMI Active Balun Set Complete set allows HDMI signals to be sent up to 50 meters, over two CAT5e cable runs. Features: •Transmits 1080i resolution up to 50m, and 1080p resolution up to 30m •Dip switch digital level and EQ adjustments •Rugged metal housing •Weight: 1.4lbs. •Mfr. #HM6EK MCM Part # 33-11050 ONLY $207.03 The component video/audio balun allows one component video (YPbPr or RGB) signal and one audio signal to be transmitted via Back cost-effective unshielded twisted pair (UTP) cable in a point-to-point configuration. Used in pairs, the component digital balun supports 480i/p, 720p and 1080i/p video formats for hidefinition (HDTV) video applications. Features: •Supports 480i/p up to 1000' (305m) and 720p/1080i/p up to 500' (152m) via Cat 5 UTP, respectively •Available with color-coded RCA cable connectors •Supports either digital audio (5000050, or 500051), or analog audio (500052, or 500053) on fourth twisted pair •Modular shielded RJ-45 connector •Sold separately, must be used in pairs MCM Part # 33-10060 33-10061 33-10062 33-10063 Mfr. # 500050 500051 500052 500053 Connectors Male RCA Female RCA Male RCA Female RCA Audio Digital Digital Analog Analog ONLY $68.99 68.99 68.99 68.99 #33-10255 #33-10256 HDTV Audio/Video Distribution Hub and Receiver VideoEase™ Component Video /IR Pass-Thru Balun Component Audio/Video Balun •Allows one component video signal and one stereo audio channel to be transmitted via one Cat5E/6 cable •Supports 480p resolution up to 1,000' •Supports 720p/1080i/1080p resolution up to 500' •6" pigtails •Supports RCA L/R stereo audio •Note: Sold individually, must be used in pairs •Mfr #500058 MCM Part # 33-11025 These baluns send Y/Pb/Pr component video signals over Cat5E/6 cable up to 500' for 1080i and 1,000' for 480p. Additionally, screw terminal connections are provided, allowing access to one Cat5 pair for passing IR signals. Models are available with female RCA connectors, or male RCA's on 6" pigtails. •Baluns must be used in pairs and are sold individually MCM Part # Mfr. # Type (1–3) (4–up) 33-11370 500054 Female RCA's $68.99 $65.54 33-11371 500054-2PK Male RCA pigtails 125.00 118.75 ONLY $115.00 4Accommodates component video (Y/Pb/Pr) plus digital audio 4Active video amplifier circuit 4Loop through output send for multiple receivers 4IR remote path Distribute high-definition component video and digital or left or right audio over extended distances using Cat 5e wire. Video and audio loop output to accommodate future expansion to additional Cat 5e transmitters and receivers. Supports 1080i video up to 300' with Cat 6. MCM Part # 33-10255 33-10256 Mfr. # Cat5TX Cat5RX Description Transmitter Receiver ONLY $104.03 120.51 VideoEase™ Component Video Balun The VideoEase™ Component Video Balun allows a single component video signal (Y, Pb, or Pr) to be transmitted via cost-effective unshielded twisted pair (UTP) cable. Features and benefits: •Supports one component of the YPbPr video signal •Three balun pairs required per YPbPr connection •Up to 1,000' (305m) via Cat 5 UTP •Gold-plated connector •Cable strain relief •Compact design •Lifetime warranty •Design patent pending •Mfr #500021 MCM Part # 33-9755 216 ONLY $23.99 www.MCMelectronics.com /1-800-543-4330 Follow us on: & 1 Distribution - Audio/Video #50-7769 #50-7768 Back Passive Component Video Balun Transformer with Digital Audio •High-definition balun transformer •Distributes component video signals with PCM digital audio over Cat 5 UTP •300'~1000' •Custom designed with wide bandwidth •Can be used for four composite video signals •Rugged metal chassis •Mfr. #C5-HDP MCM Part # 33-11052 ONLY $49.94 HD A/V Transmitter Over Cat 5 or 6 •Distributes high definition component or composite video and digital audio or left and right audio over extended distances using Cat 5 wire •Active amplification ensures high-quality transmission •Loop output for use of additional Cat 5 transmitters •Six Cat 5 outputs for additional locations •Discrete passive IR channel for the use of external IR remote control systems •For use with Cat5RX receivers (#33-10256) •Mfr. #C5T6 MCM Part # 33-11060 ONLY $207.03 Component Video Balun Front 4400' max distance Use to send Y/Pb/Pr component video signals over Cat 5 cable. This balun features three gold plated female RCA connectors, color coded red, green and blue, and a single female RJ-45 jack. Utilizes three Cat 5 cable pairs: •Red: Pin 7/8 •Green: Pin 3/6 •Blue: Pin 1/2. Specifications: •Bandwidth: 50Hz~8MHz •Dimensions (excluding connectors): 1.0" (H) x 3.2" (W) x 2.4" (L) •Sold individually, must be used in pairs MCM Part # 50-7720 (1–3) $22.99 (4–up) $21.79 Component Video Balun Use to send Y/Pb/Pr component video signals over Cat 5 cable. This balun features three gold plated male RCA connectors on the end of 8" pigtails color coded red, green and blue. Additionally, a female orange RCA connector provides path for digital audio (SPDIF). Included is a hook and loop tape set which allows direct attachment to the rear of plasma and other monitors. Cat 5 connection is a single female RJ-45 jack. Utilizes four pairs: •Red: Pin 7/8 •Green: Pin 3/6 •Blue: Pin 1/2 •SPDF: Pin 4/5 Specifications: •Distance: 400' max (Cat 5) •Dimensions: 1.0" (H) x 3.2" (W) x 2.4" (L) •Sold individually, must be used in pairs MCM Part # 50-7722 (4-up) $27.59 Used to transmit a VGA signal as well as an audio signal via standard Cat5e and Cat6 cable, these baluns provide an installer with a more cost effective and reliable solution for transmitting VGA over long distances. Features: •Standard single gang (low voltage bracket not included) •Transmits via 4 CAT5e or CAT6 pairs •Required power: 12V, 500mA (adapter included) •Front mounted DC in jack on transmitter as well as rear mounted phoenix style connector •LED power indicator •Units can also be coupled with MCM Custom Audio VGA baluns Transmission distances: •800 x 600: 400' •1024 x 768: 300' •1920 x 1200: 250' Note: •Transmitter and receiver sold separately Description Transmitter Receiver MCM Part # 50-7768 50-7769 Connectors RCA BNC (1-3) $24.99 24.99 (4-up) $23.79 23.79 #50-11035 NEW! Use to send Y/Pb/Pr component video signal up to 1080i, plus digital audio over a single Cat 5 cable. This balun mounts in a standard single gang opening and is compatible with standard decora style Back wall plates. It utilizes four RCA female jacks color coded red, blue, green and orange on the front, with a female RJ-45 jack on the rear. Sold individually, all baluns must be used in pairs, and may be used in conjunction with MCM balun models #50-7722 and 50-7720. Place one balun at each end of a Cat 5 cable up to 400' in length. Utilizes four Cat 5 cable pairs: •Red: Pin 7/8 •Green: Pin 3/6 •Blue: Pin 1/2 •SPDIF: Pin 4/5 MCM Part # 50-10295 Use to send up to four independent composite video signals over a single Cat 5 run. Baluns are available with either female RCA or BNC connectors, allowing compatibility with a wide variety of multimedia and security applications. They are also compatible with RGB and component video signal formats. Baluns feature female BNC or RCA connectors, and a single female RJ-45 jack. Utilizes four Cat 5 cable pairs, baluns may be inter mixed. Specifications: •Video bandwidth: 50Hz~8MHz •Distance: 1000' max (Cat 5) •Dimensions (excluding connectors): 1.0" (H) x 2.28" (W) x 3.22" (L) #50-11030 Component Video plus Digital Audio Balun Wall Plate Active VGA plus Audio Balun Wallplates MCM Part # 50-11040 50-11045 (1-3) $29.99 Four Channel Video Baluns (1-3) $44.79 (4-up) $40.27 Front NEW! Back Back Active VGA plus Audio Balun Used to transmit a VGA signal as well as an audio signal via standard CAT5e and CAT6 cable, these baluns provide an installer with a more cost effective and reliable solution for transmitting VGA over long distances. Features: •Transmits via 4 CAT5e or CAT6 pairs •Transmitter and receiver dimensions (not including mounting tabs): 2¼" x 25⁄8" •Transmitter includes a 1' VGA cable and 30" 3.5mm audio cable for connecting to PC •Required power: 12V, 500mA (adapter included) •LED power indicator •Units can also be coupled with MCM Custom Audio VGA balun wall plates Transmission distances: •800x600: 400' •1024x768: 300' •1920x1200: 250' Note: •Transmitter and receiver sold separately MCM Part # 50-11030 50-11035 Description Transmitter Receiver ONLY $79.99 79.99 Back ONLY $79.99 79.99 www.MCMelectronics.com /1-800-543-4330 217 1 Audio/Video - Distribution #50-10255 VGA Balun Pair VGA Balun Sets VGA balun sets are capable of transmitting a video signal at distances up to 600', with a maximum resolution of 1280x1024. Features: •Rugged metal housing •Adjustable signal gain •Compatible with CAT5e or CAT6 •VGA loopthrough provides convenient local video simultaneously with the long distance video(#33-12090 only) MCM Part # Mfr. # Balun Set 33-12085 VG5EK Balun Set with VGA Loopthrough 33-12090 VG5EKL ONLY $179.00 170.00 VGA Over Cat5 Distribution System Complete product group allows transmission and distribution of VGA video, and stereo audio, to multiple monitors. each up to 1,000' from the source. Sold separately, you can choose a two, four or eight output video sender, then simply purchase the exact number of receivers needed for each monitor. Features: •Supports up to 1920x1200 resolution •VGA loopthrough output on the sender •Adjustable brightness and skew •3.5mm jack accommodates stereo audio •AC adapter included with each sender and receiver MCM Part # 50-15020 50-15025 50-15030 50-15035 Description Sender – 1x2 splitter Sender – 1x4 splitter Sender – 1x8 splitter Individual receiver •Extends the distance between the computer system unit and a remote display monitor by up to 480' •It accomplishes this by means of a local transmitting unit, and remote receiving unit, connected by standard Cat 5 twisted pair ethernet cable Features: •Uses Cat 5 ethernet cable: For economy; easy installation; and utmost data transfer reliability •High-resolution video: Up to 1800 x 1440 at 100 meters •Supports VGA and SVGA monitors •Long distance transmission, up to 160m (480') •Local unit includes port for local monitor •Mfr. #500035 218 #50-10250 VGA Balun Series 4Interchangeable wall plate and stand alone models 4Accommodates VGA signals 4Range up to 450' depending upon resolution Ideal when computer monitor or other high-resolution video signal needs to be sent long distances. Cable runs are greatly eased by the use of smaller, lower cost Cat 5 UTP cable. These are perfect for installation of multimedia systems in educational environments, boardrooms and public areas. All units consist of an HD-15 connector for connection to the PC or monitor, and a female RJ-45 for connection to the UTP cable. Four different configurations are available, allowing a wide variety of installation possibilities. Distance (Cat 5): •VGA (640 x 480): 450' •SVGA (800 x 600): 350' •XGA (1024 x 768): 250' •SXGA (1280 x 1024): 200' Note: Baluns are sold individually and must be used in pairs. A pair must include one PC side balun and one monitor side balun. MCM VGA Part # Type Side Connector 50-10250 In-line PC Male 50-10255 In-line Monitor Female 50-10265 Wall plate PC Female 50-10270 Wall plate Monitor Female ONLY $49.99 59.99 99.99 39.99 Videoease Active VGA Balun Kit MCM Part # 33-10120 #50-10265 #50-10270 ONLY $295.00 (1-3) $34.99 34.99 34.99 34.99 (4-up) $30.49 30.49 30.49 30.49 Active VGA Balun II Kit These items allow VGA or component video to be sent via Cat 5e/6 cable in point to point configurations. Remote power pass-thru is supported and is DDC compliant with all "plug-and-play" laptops, PCs and displays. Supports up to 1920 x1440 pixels and 1080p resolution and features manual gain adjustment. In addition to the Cat 5 output, the transmitter also has an output for a local monitor. It is ideal for digital signage, residential, boardroom, classroom, and medical imaging video systems. Cat 5e distance: 600', remote power pass through is supported up to 150'. 500140 is a complete kit including transmitter, receiver and power supply. Items sold individually to support use with other components and hubs. MCM Part # 33-11040 33-11420 500142 500144 Model 500140 500141 500142 500144 Type (1–3) (4–up) Complete kit $345.00 $327.75 Transmitter 175.00 166.25 Receiver 209.00 198.55 Power supply 41.99 39.89 www.MCMelectronics.com /1-800-543-4330 VGA Baluns eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via 4-pair Cat5e/6 twisted pair cable. VGA Baluns are not symmetrical, and require a separate VGA and Monitor side. In order to ensure a commons signal ground, shielded twisted pair (STP) is required. VGA: 640x480 pixels (15MHz) 450' (137m) SXGA: 1280x1024 pixels (100MHz) 200' (61m) SVGA: 800x600 pixels (30MHz) 350' (107m) WXGA:1366x768 pixels 180' (55m) XGA: 1024x768 pixels (60MHz) 250' (76m) MCM Part # 33-12851 33-12852 33-12850 Model 500010 500014 500010-14-PK Tramsmitter End PC Monitor Pair ONLY $69.99 69.99 125.00 Receiver Back Back Active VGA Balun II Kit Complete two piece kit allows VGA video, plus stereo or digital audio and RS232 to be transmitted via a single Cat 5e/6 cable. It is DDC compliant and works in conjunction with separately available IR emitter and sensors to support IR source control. Resolution up to 1920 x 1200 is supported at distances up to 600', and manual brightness, sharpness and skew adjustments are provided. Full ground loop isolation is also provided between transmitter and receiver. In addition to the Cat 5e output, the transmitter also provides local monitor connection. MCM Part # Model 33-11425 500145 33-11485 500999 Type (1–3) Complete kit $699.00 IR sensor 21.19 (4–up) $664.05 20.13 VGA 4 x 1 Switcher Compact switcher allows a single display to select from up to four VGA sources, when Muxlab baluns are utilized, At the Cat 5e/6 cable. It operates in conjunction with Model 500140 active balun kit, and Model 500141 transmitter. At least one 500140 is required to support one source and one display, then up to three additional 500141 transmitters may be added. Features: •Auto and Manual switching modes •Manual, IR, RS232 and USB control •Plug and play – DDC1 compliant •Remote power up to 150' •Modular RJ45 on output and each input •Supports up to 1920 x 1440, 1080p •Includes GUI software and IR remote •Model #500160 MCM Part # 33-11430 (1–3) $499.00 Follow us on: (4–up) $474.05 & Distribution - Audio/Video The Active VGA Managed Dispatcher Hub (500170/171) distributes one VGA and one stereo audio channel via Cat5e/6 to up to eight or sixteen displays depending on the model. Designed for digital signage applications, the 500170 works in conjunction with the active VGA managed receiver (500174) to support Cat5e/6 cable. Additionally the active VGA managed repeater hub (500172) may be cascaded for increased distance. The overall system allows RS232 commands to be sent to remote displays. Features: •Distributes VGA/Audio to up to 8 or 16 displays Up to 1,000' •Gain/skew adjustment via manual, RS232, USB •GUI software controls gain, sharpness, skew •Local VGA and audio output MCM Part # 33-12890 33-12892 33-12894 33-12896 Mfr. # 500170 500171 500172 500174 Discription ONLY 8 Port Dispatcher $699.00 16 Port Dispatcher 899.00 8 Port Repeater Hub 749.00 Managed Receiver 549.00 VideoEase™ VGA Balun II Over UTP VideoEase™ VGA Balun II is a passive device that fully supports VGA and SVGA (RGBHV) transmission via one Cat 5 UTP cable without the need for shielded twisted pair (STP) cable. This breakthrough technology allows VGA equipment to be deployed more easily in both new and pre-wire structured cabling environments. Sold individually, must be used in pairs MCM Part # Description 33-9601 PC side (HD15-male) 33-9602 Monitor side (HD15-female) 33-9603 Monitor side (HD15-male) 33-11355 PC side (HD15-female) VideoEase™ MonoPro™ XLR VideoEase™ Audio Balun Active VGA Managed Distribution Mfr. # ONLY 500040 $68.99 500041 68.99 500042 68.99 500043 68.99 The VideoEase™ Audio Balun allows any unbalanced analog audio signal to be transmitted via a single unshielded twisted pair (UTP) cable for more versatile cabling. Used in pairs, the audio balun eliminates costly and bulky coax cable, allowing consumer and commercial audio equipment to be connected using standard premises wiring techniques. One or two pair of baluns are required depending on whether the application is for monaural or stereo audio. The audio balun features screw terminals and built-in cable strain relief for ease of installation and reliable connectivity. Applications include auditoriums, arenas, schools, home theater systems, airports, hotels, hospitals, conference rooms. Features and benefits: •Eliminates coax cable •Up to 5,000' (1.5km) via Cat 5 UTP •20~20KHz bandwidth •Goldplated RCA connector •Cable strain relief •Compact design •Lifetime warranty •Design patent pending •Mfr. #500019 MCM Part # 33-9745 ONLY $23.99 Videoease™ Quad Audio Balun The quad audio balun allows up to four analog line audio signals to be transmitted via unshielded twisted pair cable in a point-to-point connection. One pair of quad audio baluns can replace four coax audio cables with one Cat 5 cable. Features: •Unbalanced, line-level analog audio up to 5,000' via Cat 5 cable •Less than 1dB per pair over frequency range. •Mfr. #500033 •Used in pairs, sold individually. MCM Part # 33-10115 ONLY $56.99 Quad Audio Wall Balun VGA Wall Plate Baluns Interchangeable with VGA balun models 500040/41/42/43, these units fit in a single gang box and are compatible with decora style wall plates. Sends VGA video over standard CAT5e/6 cable at distances up to 350'. •Baluns must be used in a pair consisting of one PC side, and one monitor side balun. MCM Part # 33-11495 33-11500 Mfr. # 500041-WP-US 500043-WP-US Type Monitor side PC side ONLY $89.99 89.99 Allows unbalanced line level stereo to be transmitted up to 3250' via a single CAT5e/CAT6 cable. •Mfr. #33-11330 •Used in pairs, sold individually ONLY $74.99 Allows a digital audio signal to be transmitted up to 600' via a single CAT5e/6 cable. •Mfr. #500020 •Used in pairs, sold individually ONLY $44.99 MCM Part # 33-11325 The MonoPro™ XLR connectors allow a standard AES analog #33-10055 or digital audio channel to be connected via Cat 5 unshielded twisted pair cable (UTP) in the professional audio environment. The product features rugged cable strain relief and comes with locking XLR3 connectors for added cabling versatility. Features: •Rugged cable strain relief •Line analog audio up to 5,000' (1.5km) via Cat 5 •Digital audio up to 1,400' (426m) via Cat 5 •Wires terminate inside product •Locking XLR3 connector •Optional wire terminal for ground/shield (if required) •Up to 5,000' and 1,400' via Cat 5 for analog or digital audio, respectively. MCM Part # Mfr. # 33-10050 500025 33-10055 500026 Description MonoPro™ XLR male MonoPro™ XLR female ONLY $23.99 ONLY $23.99 23.99 Stereo Audio Balun Allows line level stereo audio to be transmitted up to 5000' via one CAT5e/6 cable. Features: •Up to 1000', 60Hz~20KHz •1000'~5000', 100Hz~20KHz •Less than 1dB loss •6" RCA leads •Dimensions: 1 7⁄8" (L) x 1" (dia.) •Mfr. #500027 •Used in pairs, sold individually MCM Part # 33-11240 ONLY $37.99 Stereo Audio Balun 43.5mm plug Allows unbalanced line level stereo to be transmitted via CAT5e/6 cable up to 5000'. Features: •Ideal for connection to sound cards, laptops, MP3 players, etc. •Transmits up to 1000' at 60Hz~20KHz •Transmits from 1000'~5000' at 100Hz~20KHz •Less than 1dB loss •6" 3.5mm cable lead •Dimensions: 4 7⁄8" (L) x 1" (dia.) •Mfr. #500030 •Used in pairs, sold individually MCM Part # 33-11245 Coaxial Digital Audio Balun Stereo Audio Balun MCM Part # 33-11330 Used in pairs, the Quad Audio Wall Balun allows up to four coax audio cables to be replaced by one Cat5e/6 cable. The Quad Audio Balun also works in conjunction with other MuxLab analog audio baluns such as the 500019. Note: Baluns must be used in pairs; this unit is sold individually. Features: •Four unbalanced line-level analog audio signals •Max. distance /W Cat 5E/6 UTP/STP: 3250' (1 km) •White decora mount •Mfr. #500033-WP-US MCM Part # 33-10116 1 ONLY $37.99 Stereo Hi-Fi Balun Used in pairs, the stereo Hi-Fi balun eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment. Note: Baluns must be used in pairs Features: •Line level unbalanced analogue audio •Max. distance – Cat5e/6 UTP: 3,250' (1km) •Connectors: Two RCA-M 6" cable leads MCM Part # Mfr. # Qty. Form Factor 33-11331 500028-2PK Pair Standard 33-11332 500028-WP-US Single Wall Plate www.MCMelectronics.com /1-800-543-4330 ONLY $79.99 64.99 219 1 Audio/Video - Distribution Composite Video plus Audio Balun with IR Pass Through NEW! Allows one composite video, R/L audio and one IR signal to be transmitted via CAT5e/CAT6 cable. Features: •Transmits audio up to 3250' with less than 2dB loss •Transmits video up to 2200' with less than 2dB loss •Screw terminal for IR emitter pass through •Balum with RCA connections •Dimensions: 2 ½" (L) x 2 ¼" (W) x 1" (H) •Mfr. #500049 •Used in pairs, sold individually L/R Audio Balun Audio and IR Control CAT5 Transceiver 4Accommodates L/R line level audio 4Convenient pigtail leads Use to send two channels of unbalanced line level audio over Cat 5 cable. This balun features two 8" pigtail leads, each terminated with gold plated male RCA connectors, color coded red and white, and a single female RJ-45 jack. Utilizes two Cat 5 cable pairs: •Red: Pin 1/2 •White: Pin 3/6 Specifications: •Bandwidth: 10Hz~50KHz •Distance: 1000' max (Cat 5) •Dimensions (excluding cables): 0.85" (H) x 1.69" (W) x 1.94" (L) •Sold individually, must be used in pairs MCM Part # 50-7724 (1-3) $18.99 (4-up) $18.09 MCM Part # 50-16120 L/R Audio Balun Use to send two channels of unbalanced line level audio over Cat 5 cable. This balun features two Back gold plated female RCA connectors, color coded red and white, and a single female RJ-45 jack. Utilizes two Cat 5 cable pairs: •Red: Pin 1/2 •White: Pin 3/6. Specifications: •Maximum distance: 1000' •Bandwidth: 10Hz~50KHz •Dimensions (excluding connectors): 0.85" (H) x 1.69" (W) x 1.94" (L) MCM Part # 50-7725 This Audio and IR Control CAT5 Transceiver Kit can deliver balanced audio and IR signals over 1,000'of CAT5 cable. It’s the perfect way to send noise-free audio over cabling that already exists in the home. The decorator style wall plates flush mount into the wall and blend into modern decor. The low cost, simplicity and availability of CAT5 cable, makes the A0304 a convenient choice for both new construction and retrofit applications. Features: •Control your main entertainment system remotly •Sends line-level audio over 1000' of CAT5 cable •Maximum cable run: 1,000' over CAT5 •THD + Noise: <0.2%, 20Hz-20kHz •Signal/ Noise: >-96dB •Frequency response: 20Hz-20kHz +/- 0.3dB •Input impedance: 20K Ohms •Power supply: 15VDC @850mA •Compatible with Category 5, 5e, and 6 wiring (1–3) $12.99 (4–up) $12.25 ONLY $79.99 VideoEase™ Composite Video/ Stereo Balun The VideoEase™ stereo/video balun allows a single composite videosignal and stereo audio signal to be transmitted via UTP cable up to 2,200' in a point-to-point connection. The “GLI” model features Ground Loop Isolation to help eliminate “hum” bars in areas where they are a problem. Only one 500039-GLI is required per connection and may be used in conjunction with the 500001, 500039 and 500200. Features: •Full audio bandwidth response for high fidelity applications •20Hz~20KHz audio bandwidth •Built-in color-coded cable leads for ease of installation •Mfr. #500039 •Used in pairs, may be sold separately MCM Part # 33-9626 33-9627 33-9628 Sold as 500039 Single 500039-2PK 500039-GLI ONLY $47.99 86.99 54.99 Dual A/V Balun Allows up to two composite video signals and up to two unbalanced audio signals to be transmitted up to 2200' via one CAT5e/6 cable. •Mfr. #500012 •Used in pairs, sold individually MCM Part # 33-11310 ONLY $56.99 MCM Part # 33-11231 Back L/R Audio/Video Balun 4Accommodates composite video and L/R line level audio 41,000' max distance Use to send composite video, plus two channels of unbalanced line level audio over Cat 5 cable. This balun features three gold plated female RCA connectors, color coded red, white and yellow, and a single female RJ-45 jack. Utilizes three Cat 5 cable pairs: •Red: Pin 1/2 •White: Pin 3/6 •Yellow: Pin 7/8. Specifications: •Video bandwidth: 50Hz~8MHz •Audio bandwidth: 10Hz~50KHz •Dimensions (excluding connectors): 1.0" (H) x 2.36" (W) x 3.22" (L) •Sold individually, must be used in pairs MCM Part # 50-7730 www.MCMelectronics.com /1-800-543-4330 (1–3) $21.49 (4–up) $20.39 L/R Audio Video Balun Wall Plate Use to send two channels of line level audio, plus composite video signal over a single Cat 5 cable. This balun mounts in a standard single gang opening and is compatible with standard decora style wall plates. It utilizes Back three RCA female jacks color coded red, white and yellow on the front, with a female RJ-45 jack on the rear. Sold individually, all baluns must be used in pairs, and may be used in conjunction with MCM balun #50-7732 and 50-7730. Place one balun at each end of a Cat 5 cable up to 1000’ in length. Utilizes three Cat 5 cable pairs: •Red: Pin 1/2 •White: Pin 3/6 •Yellow: Pin 7/8 Specifications: •Audio bandwidth: 10Hz~50KHz •Video bandwidth: 50Hz~8MHz •Distance: 1000’ max, using 24AWG UTP •Limited quantities MCM Part # 50-10290 220 ONLY $54.99 (1–3) $29.99 Follow us on: (4–up) $26.99 & Distribution - Audio/Video L/R Audio Plus S–Video Balun 1 #33-9585 Front 4Accepts unterminated Cat 5 cable 41,000' max distance Use to send S–video, plus two Back channels of unbalanced line level audio, over Cat 5 cable. Independent balun circuits provide separate paths for chroma and luminance signals, and left and right audio signals, utilizing four pairs of Cat 5 cable. This balun features a female 4 pin S–video connector, two gold plated female RCA connectors, color coded red and white, and a female RJ-45 jack. Specifications: •Pairs utilized: Luminance 7/8, Chroma, 4/5, Audio (red) 1/2, •Audio (white) 3/6 •Video bandwidth: DC~6MHz •Audio bandwidth: 10KHz~50KHz •Dimensions (excluding connectors): 1.0" (H) x 2.36" (W) x 3.22" (L) •Sold individually, must be used in pairs •Limited quantities MCM Part # 50-7740 (1–3) $29.99 (4–up) $27.79 S-Video Baluns MCM Part # 33-9585 33-9590 33-9590 #33-0001 #33-9590 The VideoEase S-Video Balun allows a single S-video signal to be transmitted via unshielded twisted pair (UTP) cable up to 1000' (305m) in a point-to-point connection. The product is available in two models; the S-Video Balun (500016) and the S-Video/Audio Balun (500017). Used in pairs, the S-Video Balun eliminates costly and bulky S-video cable, allowing S-video equipment to be connected or moved to any convenient modular outlet. The S-Video Balun also works in conjunction with MuxLab’s AudioVideo Distribution Hub (500200) to allow S-video programming to be distributed via UTP. Some of the applications are; classroom video distribution, commercial and home audio/video systems, hospital video training, video conferencing, and video kiosks. Note: Baluns must be used in pairs and are sold individually. •Sold individually Mfr. # 500016 500017 500017 MCM Part # 50-7732 (1-3) $23.99 (4-up) $22.79 #33-0003 This high-quality adapter converts composite video to S–video and S–video to composite video. The adapter measures only 13⁄4" long and 1⁄2" in diameter allowing it to plug directly into the equipment and solves the problems associated with mixing composite and S–video inputs and outputs. MCM Part # Description 33-0001 S male to RCA female 33-0003 S female to RCA male (ea.) $3.99 3.99 (2-up) $3.69 3.69 S–Video Balun 4Accepts unterminated Cat 5 cable 41,000' max distance Use to send S–video signal over Cat 5 cable. Independent balun circuits Back provide separate paths for chroma and luminance signals, utilizing two pairs of Cat 5 cable. This balun features a female 4 pin S–video connector, and female Front RJ-45 jack. Utilizes pin 7/8 (luminance) and pin 4/5 (chroma). Specifications: •Bandwidth: DC~6MHz •Dimensions: 1.19" (dia.) x 2" (L) •Sold individually, must be used in pairs (1–3) $13.99 NEW! Allows up to two S-Video signals to be transmitted up to 1000' via a single CAT5e/6 cable. •Mfr. #500013 •Used in pairs, sold individually ONLY $47.99 HD-SDI Balun DVI/Audio Extender Kit The CCTV PowerThru Converter Balun allows video and remote power to be transmitted via one 4-pair Cat 5e/6 cable, thus eliminating the need to install multiple cables for more efficient cabling in the analog CCTV security and surveillance environment. Additionally, the product converts 24VAC to 12VDC to allow 12VDC cameras to be remotely powered from a central 24VAC CCTV power supply. Features: •Video and remote power via one 4-pair Cat 5e/6 •Video up to 2,200' (670m) via Cat 5e/6 UTP •Installed at the camera side •Converts 24VAC to 12VDC/400mA at the camera •Transmits 24VAC up to 795' @ 400mA max MCM Part # 33-12750 The HD-SDI Balun allows one HD-SDI signal to be transmitted up to 150' (45m) via Cat5e cable at HD resolution in a pointto-point configuration. The HD-SDI Balun supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment. Features: •Supports SD, HD and 3G resolutions •Up to 400' (120m) via Cat5e cable @ SD •Cast aluminum enclosure for EMI/RFI shielding •Up to 150' (45m) via Cat5e cable @ HD •Supports Cat5e/6 cable MCM Part # 33-12760 ONLY $45.99 ONLY $64.99 Videoease Quad Video Balun NEW! The DVI/Audio Extender Kit allows one DVI channel and one line level stereo audio audio channel to be transmitted to 230' (70 m) at all resolutions up to 1080p via one Cat 5e/6 cable in a point-to-point configuration. Features: •Extends DVI and line level stereo audio via Cat5e/6 •Up to 230', at up to 1080p via one Cat5e/6 •Supports up to 1920 x 1200 resolution •HDBaseT Technology •Developed for the security video and audiovideo markets, the quad video balun allows up to four composite video channels to be transmitted over one Cat 5 cable, thus replacing up to four coaxial cables for more cost-efficient cabling •Supporting composite video up to 2,200' (670m) via Cat 5 cable and works in pairs •Streamlining cabling in applications such as security video, video-conferencing, classroom instruction, tradeshow demos, PC-training, airline information systems and home entertainment systems •Mfr. #500032 •Used in pairs, sold individually MCM Part # 33-12755 MCM Part # 33-10110 (4–up) $12.99 Dual S-Video Balun MCM Part # 33-11315 Use to send composite video, plus two channels of unbalanced line level audio over Cat 5 cable. This balun features three 8" pigtails with gold plated male RCA connectors, color coded red, white and yellow, and a single female RJ-45 jack. Utilizes three Cat 5 cable pairs: •Red: Pin 1/2 •White: Pin 3/6 •Yellow: Pin 7/8 Specifications: •Video bandwidth: 50Hz~8MHz •Audio bandwidth: 10Hz~50KHz •Distance: 1000' max (Cat 5) •Dimensions (excluding connectors): 1.0" (H) x 2.36" (W) x 3.22" (L) •Sold individually, must be used in pairs Description ONLY S-Video $23.99 S-Video and Audio 54.99 S-Video and Audio 54.99 Composite Video to S-Video Adapter MCM Part # 50-7735 L/R Audio/Video Balun DVI/Audio Extender Kit ONLY $349.00 www.MCMelectronics.com /1-800-543-4330 ONLY $56.99 221 1 Audio/Video - Distribution VideoEase™ CCTV Mini Balun PTZ Pass-Thru Balun This unit allows video, remote power and 2-wire PTZ control to be transmitted via one Cat 5e/6 cable, while providing full ground loop isolation. It may be installed either at the camera or DVR side in conjunction with other standard MuxLab CCTV baluns. Maximum distance using Cat 5e cable is 2200'. Passive device, requires no power. Mfr. #500132. MCM Part # 33-11410 (1–3) $50.99 (4–up) $48.44 Composite Video Balun Intended for composite video signal transmission, this balun is perfect for video surveillance applications. Uses one Cat5E/6 pair, and sends video up to 2,200'. RCA male video connection to RJ45 female. •Mfr. #500031 •Used in pairs, sold individually MCM Part # 33-11340 (1–3) $23.99 (4–up) $22.79 Audio/Video Hub The VideoEase Audio-Video Hub allows up to two baseband composite or one S-video signal and up to two audio signals to be distributed to up to eight destinations via twisted pair (UTP) cable for more cost-effective and versatile cabling. The Audio-Video Hub when used in conjunction with MuxLab’s line of VideoEase baluns, allows coaxial cable to be eliminated between the audio-video source and the destinations. The product works with the CCTV Baluns (500000, 500009), Stereo Audio-Video Balun (500001), Dual Audio-Video Balun (500012) and S-Video Baluns (500016, 500017). A looping output allows the source input to be distributed to other baseband audio/video equipment including matrix switchers, multiplexers, VCRs and monitors. Applications include: Classroom audio/video instruction, corporate audio/video presentations, tradeshow demonstration systems, CCTV security and surveillance. Features: Up to 2200' in color via Cat 5 twisted pair cable. 2-year warranty. Mfr. #500200 MCM Part # 33-9615 ONLY $549.00 This hub allows video, remote power and PTZ control to be transmitted via one Cat5e/6 cable between the CCTV camera and the DVR/IP encoder in the security video environment. Features: •Built-in 16-channel CCTV power supply •24/28VAC selector for each port •Power-thru or pass-thru mode port configuration •Auto resettable fuses on each port •2RH height •Seamless integration with 500130, 500022, 500024 •Mfr. #500136 ONLY $899.00 VideoEase™ Passive Video Balun Receiver Hub This 16 port hub allows video, remote power and PTZ control to be transmitted via one Cat 5 cable. It features full DC isolation for systems where ground loops may be present and works in conjunction with all MuxLab CCTV baluns. Passive device, requires no power. MCM Part # 33-11415 82-9485 82-9490 33-10065 33-11390 222 Model 500133 500000 500009 500022 500100 MCM Part # 33-9760 33-9761 Qty. 500023 Single 500023-2PK ONLY $18.59 37.99 VideoEase™ Active Composite Video Balun Transmitter Active balun circuitry provides improved performance, greater range and full ground loop isolation between video components. They are perfect for video surveillance applications where distances up to 3,000'. Transmitters are available with 12VDC or 24VAC power requirements, making them compatible with most video camera power supplies. Both transmitters require Mfr. #500009 balun as the receiver. Passive CCTV Power Integrator Hub MCM Part # 33-11520 The VideoEase™ CCTV Mini Balun allows a single CCTV video signal to be transmitted via cost-effective unshielded twisted pair (UTP) cable. Used in pairs, the CCTV balun eliminates costly and bulky coaxial cable, allowing CCTV security and surveillance equipment to be connected using standard structured cabling techniques for neater and more streamlined cabling. The flexible mini coax cable lead allows the product to fit neatly inside CCTV camera back boxes and dome camera enclosures. The CCTV balun also works in conjunction with other MuxLab CCTV baluns such as the 500000, 500009 and 500015 for a complete cabling solution. Features and benefits: •Fits inside CCTV dome cameras and back boxes •Compatible with other MuxLab CCTV baluns •Up to 2200' (670m) via Cat 5 UTP •Cable strain relief •Mfr. #500023 •Used in pairs, may be sold separately Type (1–3) (4–up) 16CH hub $599.00 $569.05 Modular balun 16.59 15.76 Compact balun 16.59 15.76 PTZ balun 21.99 20.89 Active balun 82.99 78.84 VideoEase™ Passive Video Balun Receiver Hub Compatible with any MuxLab CCTV video balun, this hub acts as a 16 channel passive receiver. Perfect for use with DVR's up to 16 channels, this unit allows cameras to be located up to 2,200' away, sending video over Cat5A cable. Each of the 16 inputs are screw terminal for direct connection to unterminated cable pairs. Outputs are BNC female. Compatible with all baluns listed below, each available separately. Passive device, requires no power. MCM Part # Mfr.# 33-11405 500130 82-9485 500000 82-9490 500009 33-10065 500022 33-9760 500023 Type (1–3) (4–up) 16CH hub $365.00 $346.75 Modular balun 16.59 15.76 Compact balun 16.59 15.76 PTZ balun 21.99 20.89 Mini balun 18.59 17.66 CCTV Power plus Video Balun Allows BNC video as well as power to be transmitted up to 500' via one CAT5e/6. •Mfr. 500029 •Used in pairs, sold individually MCM Part # 33-11335 ONLY $21.99 www.MCMelectronics.com /1-800-543-4330 MCM Part # Mfr.# Type 33-11390 500100 12VDC 82-9490 500009 Passive receiver 82-9491 500009-2PK Passive receiver 2PK (1–3) $82.99 16.59 33.29 (4–up) $78.84 15.76 31.75 BNC Video + DC Power Balun 4Provides path for 12VDC power 4Convenient 8" BNC pigtail Use to send composite video signal and low voltage DC over Cat 5 cable. This compact balun features a male BNC connector, attached to an 8" pigtail, for easy attachment directly to equipment. In addition to the BNC connection, two screw terminals are provided for direct access to two cable pairs (in parallel). This is ideal for remotely providing DC power to devices such as surveillance cameras and small LCD television monitors. Utilizes three cable pairs: •Pin 7/8 video •Pins 1/2 power (+) •Pins 4/5 power (-) Specifications: •Bandwidth: 50Hz~8MHz •Distance: 1000' (Cat 5), •Maximum recommended distance for power: 300' (using 12VDC, 500mA) •Dimensions (excluding connector): 1.0" (H) x 0.85" (W) x 2.0" (L) Sold individually, must be used in pairs MCM Part # 50-7746 (1–3) $12.99 Follow us on: (4–up) $12.25 & Distribution - Audio/Video 1 BNC Video Balun 4Accepts unterminated Cat 5 cable Use to send composite video signal over Cat 5 cable, this compact balun features a male BNC connector attached to the end of an 8" pigtail. Due to their low cost, and slim design, multiple units may be connected side-by-side to equipment. A specially designed tool-less IDC connector provides quick, reliable connection to unterminated Cat 5 cable. Specifications: •Bandwidth: 50Hz~8MHz •Distance: 1000' max, using 24AWG UTP •Dimensions (excluding connector): 0.625" (H) x 0.625" (W) x 1.563" (L) •Sold individually, must be used in pairs MCM Part # 50-7751 (1–3) $12.99 (4–up) $11.39 Surface Mount Balun Plate Allows Muxlab square baluns to be installed on a wall or furniture surface for a more permanent and secure installation. It covers the balun while allowing the pin configuration to be displayed for ease of reference. Mounting ears are positioned to allow multiple fixtures to be installed next to each other. Includes mounting screws and plastic drywall anchors. •Mfr. #500915 MCM Part # 33-11475 ONLY $20.69 #50-7769 (1–3) $10.99 (4–up) $9.99 Video Balun Use to send composite video signal over Cat 5 cable. This balun features a gold plated female RCA connector, and female RJ-45 jack. Screw terminals are available for connecting unterminated Cat 5 cable. Utilizes one pair (pin Back 7/8) of Cat 5 cable. Specifications: •Maximum distance: 1000' •Bandwidth: 50Hz~8MHz •Dimensions (excluding connector): 1.0" (H) x 0.85" (W) x 2.0" (L) •Sold individually, must be used in pairs (1–3) $9.99 (4–up) $8.99 Four Channel Video Baluns 4Accommodates four composite video signals 4RCA or BNC connectors 41,000' max distance Use to send up to four independent composite video signals over a single Cat 5 run. Baluns are available with either female RCA or BNC connectors, allowing compatibility with a wide variety of multimedia and security applications. They are also compatible with RGB and component video signal formats. Baluns feature female BNC or RCA connectors, and a single female RJ-45 jack. Utilizes four Cat 5 cable pairs, baluns may be inter mixed. Specifications: •Video bandwidth: 50Hz~8MHz •Distance: 1000' max (Cat 5) •Dimensions (excluding connectors): 1.0" (H) x 2.28" (W) x 3.22" (L) MCM Part # 50-7768 50-7769 NEW! BNC/Power Baluns Power-Video-Audio Data signals are routed via Rj45/ UTP. This unit is a passive device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) wire. Features: •NTSC, PAL, and SECAM video formats •60dB Crosstalk and noise immunity •Built-in transient suppression protection ONLY $9.99 Connectors RCA BNC BNC Video + DC Power Balun 4Provides path for 12VDC power MCM Part # 50-14520 Description (1–3) (4–up) 16RU panel $229.00 $217.55 Blank filler 16.89 16.05 CATV Balun Intended to send composite video signal over Cat 5 cable, this balun features an RCA female connector with yellow insert, for easy identification as the video path. Rear mounted IDC connector allows simple, fast connection to unterminated Cat 5 cable. Maximum distance: 1000'. Sold individually. MCM Part # 50-7710 MCM Part # Model 33-9620 500900 33-11465 500901 #50-7768 Keystone Mount Composite Video Balun MCM Part # 50-7715 Rack Mount Chassis Designed as a head-end cable management solution, this allows any combination of MuxLab square baluns to be installed within any 19" rack. 16 balun chassis occupies 2RU space, six balun chassis occupies 1RU. Blank filler panels available separately. (1-3) $24.99 24.99 (4-up) $23.79 23.79 Back (1–3) $23.12 MCM Part # 33-9630 33-9631 ONLY $40.99 74.99 Shielded CATV Balun Front Use to send composite video signal and low voltage DC over Cat 5 cable. This balun’s very compact size and male BNC connector makes for easy attachment directly to equipment such as monitors, processors and cameras. In addition to the BNC connection, two screw terminals are provided for direct access to a second cable pair. This is ideal for remotely providing DC power to devices such as surveillance cameras and small LCD television monitors. Utilizes two cable pairs: •Pin 7/8 video •Pin 4 power (+) •Pin 5 power (–) Specifications: •Maximum distance: 1000' •Bandwidth: 50Hz~8MHz •Maximum recommended distance for power: 300' (using 12VDC, 500mA) •Dimensions (excluding connector): 1.0" (H) x 0.85" (W) x 2.0" (L) MCM Part # 50-7745 The VideoEase CATV Balun allows traditional 75ohm coaxial cable to be replaced by a single pair of Cat 5 UTP cable in the CATV, VHF and FM environments in certain applications. The CATV Balun allows broadband CATV equipment to be integrated into structured cabling systems thereby allowing CATV equipment to be moved or added to any convenient modular wall outlet. The VideoEase CATV Balun provides a versatile cabling solution for broadband video systems used by schools, government, corporations, hospitals, financial institutions, hotels and convention centers. The CATV balun works in conjunction with CATV splitters, amplifiers and cable modems for a total cabling solution. Mfr. #500302 Features: Low return loss eliminates “ghosting”. Pair required for use, sold individually. (4–up) $20.36 The Shielded CATV Balun (500306) allows RG6 coaxial cable to be replaced by Cat 5e/6/7 STP or UTP cable in the terrestrial RF environment. Used in pairs, the Shielded CATV Balun allows broadband CATV equipment to be integrated into a structured cabling system thereby allowing CATV equipment to be moved or added to any convenient modular wall outlet. When used with Cat 5e/6/7 shielded twisted pair cable, the connection supports greater RF amplification and therefore greater distance with less EMI/RFI egress versus other UTP CATV baluns. Features: •Cast aluminum enclosure for maximum EMI/RFI shielding •Bandwidth up to 900 MHz including Internet, digital cable •Supports Cat5e/6/7 STP and UTP •Lower EMI /RFI egress when STP is used •Low insertion loss •Must be installed in pairs to function. MCM Part # 33-12880 33-12881 Model 500306 500306-2PK www.MCMelectronics.com /1-800-543-4330 Quantity Single Pair ONLY $49.99 89.99 223 1 Audio/Video - Distribution Distribution Amplifliers/Splitters HDMI 1x8 Splitter Allows 4 HDMI sources to be shown on up to 4 HDMI displays with IR & RS232 controls. Features: •Full HD1080P/120HZ •HDCP compliant •5V DC, UL Listed power supply •Dimensions: 12.25"W x 1"H x 6.5"D •Includes IR remote control High quality distribution amplifier allows up to eight video monitors to be driven from a single HDMI source. It is perfect for all types of HD video applications including home theater, conference rooms, schools and retail locations. Features: •Supports 3D video and HDCP 2.0 •Supports 1080p/12-bit Deep Color •Rugged metal enclosure •Rear panel ON/ OFF rocker switch •Requires 5VDC/3A, AC adapter included •Dimensions: 11⁄8" (H) x 125⁄8" (W) 4" (D) MCM Part # 33-12640 MCM Part # 33-12515 HDMI 4X4 Matrix Switch With IR and RS232 ONLY $459.00 ONLY $229.00 HDMI Distribution Amplifiers High quality HDMI splitters allow a single high definition video source to drive multiple video monitors. Features: •HDMI 1.4a with 3D and HDCP 1.2 compliance •Supports up to 1080p resolution •24/36 bit Deep color support •Built in equalization drives cables up to 65' from each output •Rugged metal housing with gold plated connectors •Dimensions: 1" (H) x 4.367" (W) x 2.95" (D) •Requires 5VDC, AC adapter included MCM Part # 33-12710 33-12715 Ouputs Two Four ONLY $39.99 64.99 HDMI Over Cat5 8X8 Matrix Sender With IR Offers unprecedented flexibility and convenience by extending high definition Audio/Video signals from any of eight HDMI sources to any of eight remote displays over HDMI or Cat5e/Cat6 cables. Cables. Features: •Extends 1080p up to 110' over Cat6 cables •Includes eight IR emitters to control sources •19" Rack mountable •Supports both HDMI and DVI inputs •HDCP compliant MCM Part # 33-12635 33-12636 Item Sender Receiver ONLY $3999.00 199.00 HDMI 1x2 Splitter High quality distribution amplifier allows two video monitors to be driven from a single HDMI source. It is perfect for all types of HD video applications including home theater, conference rooms, schools and retail locations. Features: •Supports 3D video and HDCP 2.0 •Supports 1080p/12-bit Deep Color •Rugged metal enclosure •Requires 5VDC/1A, AC adapter included •Dimensions: 11⁄8" (H) x 51⁄2" (W) 35⁄8" (D) MCM Part # 33-12505 ONLY $69.99 Allows 2 HDMI sources to be shown on up to 4 HDMI displays with IR controls. Features: •Full HD1080P/60HZ •HDCP compliant •5V DC Power supply included •Shelf or wall mounting •Dimensions: 12.5"W x 1.125"H x 6.5"D ONLY $219.00 HDMI 3X1 Switch with IR Allows a single HDMI display to select from up to three different sources with IR controls. Features: •Full HD1080P/60HZ •HDCP compliant •5VDC power supply included •Shelf or wall mounting •Dimensions: 4.37" (W) x .87" (H) x 2.87" (D) 224 ONLY $49.99 ONLY $119.00 HDMI 1x4 Splitter/ Cat5 Extender Set HDMI 1x4 Splitter MCM Part # 33-12680 Complete set consists of one HDMI to Cat5 transmitter, and two Cat5 to HDMI receivers, allowing a single source to send high definition video up to 160' to two video monitors. Features: •HDMI 1.2a compliant •Supports 24 bit Deep Color and 1080p resolution •Auto equalization •Rugged metal housing with gold plated connectors •Dimensions (transmitter): 1" (H) x 4.0" (W) x 3.9" (D) •Dimensions (each receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires 5VDC, three AC adaptors included •Sold as a set of one transmitter and two receivers MCM Part # 50-15005 HDMI 2x4 Matrix Selector with IR Control MCM Part # 33-12650 HDMI 1x2 Splitter/Cat5 Extender Set High quality distribution amplifier allows up to four video monitors to be driven from a single HDMI source. It is perfect for all types of HD video applications including home theater, conference rooms, schools and retail locations. Features: •Selectable resolution detection modes •Supports 3D video and HDCP 2.0 •Supports 1080p/12-bit Deep Color •Rugged metal enclosure •Requires 5VDC/2A, AC adapter included •Dimensions: 11⁄8" (H) x 71⁄4" (W) 43⁄4" (D) MCM Part # 33-12510 ONLY $109.00 www.MCMelectronics.com /1-800-543-4330 Complete set consists of one HDMI to Cat5 transmitter, and four Cat5 to HDMI receivers, allowing a single source to send high definition video up to 160’ to four video monitors. Features: •HDMI 1.2a compliant •Supports 24 bit Deep Color and 1080p resolution •Auto equalization •Rugged metal housing with gold plated connectors •Dimensions (transmitter): 1.6” (H) x 10.6” (W) x 7.1” (D) •Dimensions (each receiver): 1” (H) x 2.5” (W) x 3.9” (D) •Requires 5VDC, five AC adaptors included •Sold as a set of one transmitter and four receivers MCM Part # 50-15010 ONLY $179.99 Follow us on: & Distribution - Audio/Video NEW! HDMI Distribution Amplifier •Enhanced amplified signals for longer cable runs •HDMI/HDCP compliant •Supports high-resolution displays of UXGA, 480i, 480p, 720p, 1080i, 1080p •Secure HDMI connection with integrated cable retention bracket •Multiple amplifiers can be cascaded for additional high definition distribution MCM Part # 33-11525 33-11055 33-11057 Mfr. # HA2-3 HA4-3 HA8 1 Professional Grade Audio/Video Distribution Amplifier Description 1 x 2 1 x 4 1 x 8 ONLY $89.99 229.00 305.00 Component Audio/Video HDTV Distribution Amplifier with Digital Audio Distribute digital and analog television signals, from a single A/V source to nine televisions/ receivers, or use one port as a loop-thru output port to cascade additional distribution amplifiers. Features: •Component video (Y, Pr, Pb, or Y, Cr, Cb), composite video, analog audio and SPDIF digital audio distribution •High bandwidth (>50MHz) performance, low distortion, and one-to-one signal ratio ensures equal picture quality. Power: 9~10VAC, 500mA adapter included. •Mfr. #AV901HD MCM Part # 33-10090 The AV501HDXI distributes one audio/video signal to up to four locations. Combo component video/ composite video plus audio (analog and digital) input provides versatility, and integrated ground loop isolator prevents hum bar problems. Loop output allows for daisy chaining. MCM Part # 33-12050 ONLY $259.00 ONLY $208.06 1x4 Component Video Distribution Amplifier A/V amplified splitter is designed for distributing high definition video signals from a single source to up to four television monitors. Path is also provided for left and right line level audio Features: •Y/Pr/Pb component video path may also be used for up to three individual composite video signals •Rugged metal enclosure •Requires 12VDC/500mA, AC adapter included MCM Part # 33-12580 ONLY $34.99 1x9 Component Video Distribution Amplifier A/V amplified splitter is designed for distributing high definition video signals from a single source to up to nine television monitors. Path is also provided for left and right line level audio and coaxial digital audio. Features: •Y/Pr/Pb component video path may also be used for up to three individual composite video signals •One output may be used to daisy chain up to nine additional amplifiers, allowing distribution to up to 81 sets •Compatible with all digital audio formats •Rugged metal enclosure •Requires 12VDC/1.2A, AC adapter included MCM Part # 33-12590 Component Video Distribution Amplifier Component Audio/Video HDTV Distribution Amplifier with Digital Audio Allows for multiple signal distribution equal to source signal input. Distribute digital/HDTV and analog television signals, including digital audio and composite video from a single A/V source to five televisions/receivers, or use one loop-thru output port to cascade additional distribution amplifiers. Features: •Component video (Y, Pr, Pb, or Y, Cr, Cb), composite video and SPDIF digital audio distribution •Compatible with all HDTV, digital and analog signals •High bandwidth (>50MHz) performance, low distortion, and one-to-one signal ratio ensures equal picture quality Power: •9~10VAC, 500mA adapter included •Mfr. #AV501HDX MCM Part # 33-10087 4Single input with four outputs 4Accommodates component video (Y/Pr/Pb) applications 4Accommodates L/R line level audio Four-way audio/component-video distribution amplifier for Y, Cb, Cr and Y, Pr, Pb applications. Features high performance, low distortion and true one-to-one signal ratio. These professional grade amplifiers are cascadable for use in large displays and are enclosed in metal housings to reduce interference. •Mfr. #AV400COMP MCM Part # 33-7050 ONLY $98.87 ONLY $155.53 ONLY $139.00 www.MCMelectronics.com /1-800-543-4330 225 1 Audio/Video - Distribution EZ Hum Killer 2 •Transformer isolation module •Ground-loop hum elimination •Ground-lift switch •Fully shielded •RCA connections High-Performance Distribution Amps 4Single input with four or seven outputs 4Accommodates L/R line level audio and composite video Component Audio/Video HDTV Distribution Amplifier Distribute digital/HDTV and analog television signals from a single A/V source to nine televisions/receivers, or use one of the output ports to cascade additional distribution amplifiers. Features: •Component video (Y, Pr, Pb) and audio distribution •Compatible with all HDTV, digital and analog signals •High performance, low distortion, one-to-one signal ratio ensures equal picture quality •Unlimited cascade capability •Mfr. #AV901COMP MCM Part # 33-6875 33-6880 Mfr. # AV400 AV700 Outputs Four Seven ONLY $52.00 67.97 Back ONLY $120.51 VGA Splitter/Distribution Amplifier •400MHz pixel frequency •Easy installation •Can be cascaded •Supports DDC, DDC2, DDC2B •Compatible with standard VGA cards Outputs Four Eight Mfr. # VG41DA VG81DA ONLY $80.11 86.41 91.27 ONLY $99.99 149.00 Transformer based groundloop isolator, eliminates hum commonly associated with ground loop problems. Model # AV-HK1 AV-HK1X Operation Stereo RCA Mono XLR ONLY $83.55 91.72 Stereo Ground Loop Isolator Tabletop distribution amplifier allows selection between two A/V inputs and provides up to four outputs. Independent left and right audio signal paths allow compatibility with stereo sources including CD/DVD players, VCRs, video games and satellite receivers. Front panel pushbutton selects between two input sources, and internal amplifier maintains signal quality when distributed to four outputs. Gain at each output is 2dB over input signal level. Rugged metal enclosure measures 15⁄8" (H) x 7" (W) x 27⁄8" (D), including non–skid rubber feet. Color–coded input/ output connections are RCA type female. Requires 12VDC, AC adapter included. MCM Part # 30-1376 (1-3) $26.99 (4-up) $24.99 •Reduces or eliminates noise caused by ground loops that exist between multiple components in a automotive sound system •Also very effective in home audio systems where ground loops between components cause the presence of 60Hz hum •Simple in-line connection •Handles two unbalanced line level audio signals (stereo) •Attached pigtails include molded male and female RCA type connectors MCM Part # 60-10515 ONLY $5.49 Deluxe In-Line Noise Filter •Line level filter isolated ground between amp and radio •Eliminates noise due to signal path ground loops •Gold plated RCA connectors A/V 1X4 Distribution Block MCM Part # 60-405 The FP AVDA4 is the ideal choice in applications where consumer format audio and video signals need to be distributed simultaneously. audio and video inputs and outputs are made on the top panel phono jacks. The FP AVDA4 has a single 75 Ω input phono jack for the video signal and two phono jacks for the left and right audio inputs. Four source terminated, 75 Ω video outputs are provided on the video output phono jacks. Four stereo audio outputs are provided on phono jack pairs located adjacent to the corresponding video output. Unused outputs need not be terminated. audio and video outputs are at unity gain. Features: •RCA input and output •Input Impedance: 75 Ω •Output Level: 1 V p p (into 75 Ω) •Power Requirement: 24 VDC @ 60 mA •Mfr. #FP-AVDA4 Allows for multiple signal distribution equal to the source signal input. Four way audio/video distribution amplifier with S-video inputs and outputs. Features high performance, low distortion and true one-to-one signal ratio. These professional grade amplifiers are cascadable for use in large displays and are enclosed in metal housings to reduce interference. •Mfr. #AV400SV. MCM Part # 555-18804 MCM Part # 33-7045 226 Connections Stereo Audio Composite Video RCA A/V Hum Killer MCM Part # 555-18816 555-18818 A/V Distribution Amplifier/Selector MCM Part # 33-12070 33-12075 Mfr. # EZ-HK1 EZ-HK2 EZ-HK3 These high-performance distribution amplifiers feature specifications such as a true one-to-one ratio, no signal loss, low noise, low distortion and unity gain. 4Loop through output to cascade additional units 4Accommodates L/R line level audio MCM Part # 33-10080 MCM Part # 555-18832 555-18834 555-18836 ONLY $249.20 ONLY $9.99 S-Video Distribution Amplifier ONLY $73.12 www.MCMelectronics.com /1-800-543-4330 BNC Composite Video Ground Loop Isolator Ideal for solving ground loop problems that manifest themselves as interference patterns on video monitors or 60 cycle hum in audio equipment. High quality transformer ensures full ground isolation between input and output, while passing video signal Features: •Supports NTSC, PAL or SECAM MCM Part # 50-14525 ONLY $16.19 Follow us on: & Distribution - Audio/Video Dual Channel Ground Loop Isolator Ground loop problems in A/V systems normally appear as a hum in speakers or horizontal bars on video monitors. These problems typically occur when multiple components receive AC power from different locations, or because CATV, satellite or antenna systems provide a separate ground point. This isolator solves that problem by providing ground path isolation between components, while maintaining full frequency response. Features: •Rugged steel enclosure •RCA input and output connections •Fully independent L/R channels Specifications: •Frequency response: 10Hz~50KHz •THD: 0.01% •Dimensions: 1.50" (H) x 3.50" (W) x 2.50" (D) •Passive device, requires no power MCM Part # 50-9040 (1-3) $34.99 (4-up) $30.49 Component Video plus Analog Audio to HDMI Converter Compact converter allows conversion of a component video signal and a digital audio signal to an HDMI 1.2 signal. Features: •Supports up to 1080p resolution •24bit deep color support •LPCM uncompressed audio support •DTS and Dolby® Digital support •Required power: 5VDC (adapter included) MCM Part # 33-11605 ONLY $49.99 MCM Part # 555-7685 ONLY $60.00 Media Converters Component Video plus Digital Audio to HDMI Converter Allows full HDMI pass-though while providing simultaneous access to SPDIF, Toslink, and downmixed stereo analog audio feeds. Features: •Use to extract audio signals from an HDMI source •Supports 2.0CH/5.1CH audio •Supports 225 MHz/2.25 Gbps per channel •Power supply: 5VDC, UL listed •Dimensions: 2.75" (W) x .75" (H) x 2.378" (D) MCM Part # 33-12690 ONLY $89.99 Digital to Analog Converter VGA plus Analog Audio to HDMI Converter MCM Part # 33-11625 The DTI™ is a high quality, passive solution to ground loop hum. Dual, high quality isolation transformers provide ground path isolation between components, while maintaining full frequency response. Features: •Virtually indestructible, extruded aluminum enclosure •1⁄4" TRS, XLR and RCA input and output connection pairs, supporting balanced or unbalanced lines •Two independent channels for correcting two ground loops, or for processing a stereo signal Specifications: •Frequency response: 10Hz~50KHz, ±0.5dB @ +4dBu •THD: 0.01% typical @ 1KHz, +18dBu •Insertion loss: 0.4dB @ 100Kohm load, 5.5dB @ 600ohm load •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D) •Passive device, requires no power •Mfr. #DTI HDMI Audio Extractor NEW! Compact converter allows conversion of a VGA video signal plus L/R analog audio signal to an HDMI audio/video signal. Features: •Supports up to 1280x1024 resolution •24bit deep color support •Required power: 5VDC (adapter included) DTI Dual Channel Ground Loop Isolator 1 ONLY $49.99 Compact Digital to Analog converter allows for the conversion of digital audio signals to analog unbalanced line-level audio. Perfect for integrating newer digital devices into existing high-quality stereo systems. Features: •Automatically down-mixes up to six channels (5.1) •Switch-selectable input •Unbalanced line-level output thru RCA connectors •Required power: 5VDC (adapter included) •Supports 32.0, 44.1, 48.0, and 96KHz sample rates MCM Part # 33-11631 Universal Digital / Analog Audio Converter Highly versatile device will convert stereo audio signal between digital and analog formats. Features: •Three position input switch selects between L/R analog line level, TOSLINK or coaxial digital input •Simultaneously provides L/R line level, plus TOSLINK and coaxial digital audio output •Dimensions: 1.1" (H) x 4.13" (W) x 2.9" (D) •Requires 12VDC, AC adapter included MCM Part # 33-12700 ONLY $59.99 ONLY $29.99 5.1 Channel Digital Audio Converter The digital audio converter, 5.1 channel (500081) converts one 5.1 channel encoded coaxial (S/PDIF) or optical (TOSLink) digital audio signal to a standard left/right analog audio output, thereby allowing a digital audio source such as a DVD or CD player without RCA analog audio output to be connected to an audio-video receiver or TV. Features: •Converts 5.1 digital audio to left/right analog audio •Switch selects between TOSLink and S/PDIF inputs •TOSlink cable included MCM Part # 33-12765 ONLY $99.99 Bi-Directional Digital Audio Converter Analog to Digital A/D Audio Converter Compact converter allows conversion of a component video signal and a digital audio signal to an HDMI 1.2 signal. Features: •Supports up to 1080p resolution •24bit deep color support •LPCM uncompressed audio support •DTS and Dolby® Digital support •Required power: 5VDC (adapter included) Compact converter allows conversion of an analog L/R line level audio signal to a coaxial or toslink digital audio signal. Features: •Supports 48KHz sampling rate •Noise free operation •Supports uncompressed channel LPCM digital audio •Required power: 5VDC (adapter included) Highly versatile device converts digital audio between TOSLINK and coaxial format. Features: •TOSLINK or coaxial input •TOSLINK and coaxial output •Both outputs function simultaneously •Dimensions: 1.1" (H) x 2.55" (W) x 2.9" (D) •Requires 12VDC, AC adapter included MCM Part # 33-11600 MCM Part # 33-11635 MCM Part # 33-12705 ONLY $49.99 ONLY $34.49 www.MCMelectronics.com /1-800-543-4330 ONLY $24.99 227 1 Audio/Video - Distribution RF Modulators Composite/S-Video to HDMI Scaler •Use your composite and S-video equipment with HDMI televisions, switches, receivers and more •Basic upscaling to 720P at 60MHz •Syncs audio and video channels •Works with any HDMI to DVI adapter •Dimensions: 6.1" x 2.75" x 0.90" •Includes 5V, 2A power supply MCM Part # 33-10720 ONLY $72.99 Composite Video plus L/R Analog Audio to HDMI Scaler/Converter •Up-scales non-HD video composite or S-video (analog) with L/R audio signal to an HDMI output (digital) •Output can be fixed at 720p or 1080p by a select switch •Scales up Composite video or S-video to HDMI 720p and full 1080p HDMI output is optional at 720P/60Hz or 1080P/60Hz •Input video systems - NTSC and PAL automatically detected and adjusted •Composite video and S-video can stay simultaneously connected to the unit and can be selected as the input by the switch button •Composite video and S-video share the same audio input •Input audio is integrated into HDMI output as well as passthrough •The scaler will remember settings even when the power is off •Mfr. #HSC14 MCM Part # 33-12055 High Definition Television Tuner The DT-1200 tunes ATSC digital television broadcasts and is intended for use with televisions, monitors or projectors not equipped with a digital tuner. USB port allows full playback and record capability from flash drives or external USB hard drives. Playback may be viewed directly through unit, or virtually any PC. Features: •Output resolution up to 1080i •Automatic channel scan •On screen guide •Time shift and programmable recording •39 button IR remote control Outputs: •NTSC Channel 3⁄4 •Composite video •L/R line level audio •Y/Pr/Pb component video •HDMI •Coaxial audio, Dolby Digital 5.1 Supported files: •Photo: jpg, bmp and png •Music: wma, mp3, acc •Video: avi, mpg, dat, vob, mts and mjpeg Record format: mts •Dimensions: 13⁄4" (H) x 73⁄4" (W) x 61⁄2" (D) •Model #DT-1200 MCM Part # 30-2900 ONLY $79.99 Digital Signage Media Player with Internal ATSC Television Tuner VGA Video Plus L/R Analog Audio to HDMI Scaler/Converter MCM Part # 33-12060 Converts HD component video (Y-Pb-Pr) and left and right audio signals to an HDMI output. This permits any source with any range of component video to be viewed on any HDMI display. Features: •Can be displayed on any HDMI display. •HDMI 1.2 compliant •HDCP compliant •Supports: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p •Mfr. #HSC20 MCM Part # 33-12080 33-11082 MCM Part # 33-0001 33-0003 228 ONLY $748.00 699.00 ONLY $86.99 Component Video plus L/R Analog Audio to HDMI Scaler/Converter MCM Part # 33-12065 Mfr. # MP500T MP500R The Channel Plus 5415HD is a single channel, high definition video modulator that takes the output from a single HD source and broadcasts it over standard coax cable. Frequency agile output allows signal to be placed on any ATSC channel between 2.1 ~ 135.1. It accepts component video input (y/Pb/Pr), plus coaxial digital audio input, and provides resolution up to 720p. Internal 25dBm RF amplifier ensures plenty of output strength for long cable runs and multiple set distribution. Features: •Standard “F” type coax output •Supports HD-video up to 720p @ 60 fps •Component video input •Digital audio input: SPDIF (female RCA, 75ohm) •Easy to use, front panel single button Channel Plus™ programming •No computer needed for programming •Integrated 25dB video amplifier •Supports DTV channels 2.1 to 135.1 •MPEG2 video encoding •QAM modulator encoding •Fan cooled •Dimensions: 1.5" (H) x 10.4" (D) x 4.7" (D) MCM Part # 33-12000 The HSC16 converts a PC VGA and audio to HDMI, with the benefit of connecting the PC to a 1080p HDTV. The converter will support multiple resolutions up to 1920 x 1080 @ 60Hz. This unit supports the most popular resolutions to ensure high compatibility with most brands of PCs and HDTVs. It provides an economical solution for connecting a PC to a HDTV. Mfr. #HSC16 This high quality advertising solution allows users to play content from multiple sources such as a solid state memory device, hard drive, or IP streams from ethernet. It has an extremely effective performance versus cost ratio and provides a great return on investment. The powerful internal video processor rivals the performance of a PC, with graphics capability that is on par with a Blu-ray player but with much greater reliability because there are no moving parts. Features: •High definition real time decoding up to 25Mbps over ethernet •Multi-layering: video and web browser •Integrated event logging •UDP/RTP multicast stream MPEG2 and H.264 decoding •SNMP network control API •Multilayer support for browser overlays •Internal compact flash storage •Integrated play list •Optional ATSC television tuner Tuner Yes No ONLY $145.00 Frequency Agile HDTV RF Modulator ONLY $719.00 RF Modulator Allows connection of any audio/video source to a television without RCA inputs. Modulator is also cascadable (using standard CATV signal combiners), allowing a single coaxial cable to carry multiple video sources. Features: •Three RCA inputs (composite v ideo and stereo audio) •Digital channel display •CATV channels: 64~125 (except 95~99) •UHF channels: 14~69 •3' coaxial cable included •Channel memory •Operates on 9VDC, 200mA power supply (included) MCM Part # 33-11095 ONLY $86.99 ONLY $29.99 Back Digital UHF Modulator 4Accepts composite video/line level audio source 4LED output channel display #33-0001 #33-0003 Composite Video to S-Video Adapter This high-quality adapter converts composite video to S–video and S–video to composite video. The adapter measures only 13⁄4" long and 1⁄2" in diameter allowing it to plug directly into the equipment and solves the problems associated with mixing composite and S–video inputs and outputs. Description S male to RCA female S female to RCA male (ea.) $3.99 3.99 (2-up) $3.69 3.69 www.MCMelectronics.com /1-800-543-4330 The USM-8D is a low cost, frequency stable, UHF modulator developed for use in adding satellite, VCR, or security video channels to an existing home distribution system. The frequency adjustable feature allows multiple channel use at an extremely low cost. Specifications: •Frequency range: UHF channels 14~69 and CATV channels 65~139 •Video input: Composite •Output impedance: 75ohm •Output level: 7dBmV •Power input: 115VAC, 60Hz, 5W •Connectors: “F” for RF, RCA video and audio •Mfr. #USM-8D MCM Part # 33-2740 (1-9) $52.00 Follow us on: (10-up) $49.28 & Distribution - Audio/Video 1 MINI RF Modulator The Terk MINI modulator is a compact, inexpensive modulator that will convert any video source to VHF for viewing on your TV on either channel 3 or 4. Its low signal loss enables it to deliver excellent picture and sound quality. The MINI reduces the clutter around your TV by easily mounting on your wall or entertainment center. The MINI was designed to be in-line, so that it can hang or be mounted on a vertical surface and out-of-sight. After first installation, there is no need to access the MINI again. It features automatic signal detection and automatically switches between A/V sources when a signal is detected. •Mfr. #MINI. MCM Part # 33-9645 ONLY $20.99 Back Frequency Agile RF Modulator CATV/UHF with IR Digital RF Modulator 4Places each input source on an independent channel 4Allows source selection by simply changing channels The 5525-01 is a two channel input modulators with loop–out capabilities and integrated IR control. Offers IR emitter output jacks and the ability to remotely power a DA-550 series or an DA-8200 series distribution panel from up to 75' away. The 5500 series works with both the 12 volt and 5 volt IR systems and accessories. The 5525-01 offers 75ohm termination jumpers on all channels to loop–through the video and audio signals. Features include: 1, 2 and 4 channels, push button programming, UHF 14~64 and CATV 65~125, 25dBmV output. MCM Part # 5525-01 Back ONLY $145.23 High quality video modulators convert video and stereo audio sources into programmable TV channels, and is ideal for items such as cameras or private broadcasts. Units also have an IR emitter output, and are compatible with 12V or 5V IR systems. Features: •Range: CATV 65~125 (excluding 95~99) and UHF 14~64 •Push-button digital programming of modulated channels •Compatible with distribution amplifiers •Video loop-through •One channel •Mfr. #5515 MCM Part # 33-12015 ONLY $59.99 Video Selectors #33-10535 RF Modulator and Video Switcher #33-10533 4Four input selector 4Selectable output on CH3 or CH4 #33-10532 •Lets you connect components with S-video or composite output (DVD, satellite) to a TV without A/V jacks, by modulating the signal to RF •Ideal for hooking up several components to a TV •Combines RF modulator and S-video switcher into one unit •Converts any input (S-video, composite, A/V, stereo) to RF output •A/V and S-video switching •Composite to S-video convertor •Front input, stereo input •Gold plated connectors MCM Part # CRF940 ONLY $29.99 Back SLV A/V RF Modulator 4Accepts composite video/line level audio source 4Auto switching between antenna and A/V source The mini RF modulator is a compact, inexpensive modulator that will convert any composite video source to VHF for viewing on your TV on either channel 3 or 4. Its low signal loss enables it to deliver excellent picture and sound quality. This modulator allows you to connect additional A/V components, such as a DVD player or a gaming system, to your TV when there are no available RCA jacks. Inputs: Three RCA (composite video and stereo audio), one “F”. MCM Part # 33-9775 (1-9) $13.99 (10-49) $13.20 Volume Regulator The TERK TV Volume Regulator (VR-1) delivers a consistent, quality audio level while channel surfing or changing between A/V sources, without adjusting the volume. The VR-1 features Advanced Digital Signal Processing technology that automatically adjusts sound levels without introducing additional noises. In the VR-1, Noise Reduction technology automatically reduces any “hiss” already present in audio. This clarifies whispers and articulates quiet scenes to a level that you can enjoy. Its DualBand Automatic Gain Control adjusts bass and treble signals separately for improved dialog. With response as quick as .002 seconds, the VR-1 delivers consistent audio levels when sudden loud noises such as explosions are present. The VR-1 is easy-to-install and is compatible with any A/V device. Its compact design allows for out-of-sight installation. Consumers adjust the volume as much as twenty five times an hour. TERK’s TV Volume Regulator allows you to focus on the entertainment and not the volume control. Once installed, you can set the VR-1 to your desired level and enjoy quality audio. The VR-1 automatically matches the volume of commercials to the program level, eliminating those sudden, loud noises that disturb the household or neighbors. By making dialog more intelligible and reducing blaring music or sound effects, the VR-1 is a great solution for the home theater enthusiast. Mfr. #VR-1 MCM Part # 33-9635 ONLY $29.99 HDMI 1.3 Input Switch •Easily switch between multiple HDMI sources while running a single HDMI cable to your high-definition display •Extends the range of HDMI compliant device by equalizing HDMI signal •Included discrete IR remote (not included with #33-10532) •Auto sensing inputs allow switching between only active HDMI sources Specifications: •Output video: HDMI 1.3b + HDCP 1.0/1.1 •Video formats supported: Up to VGA 920 x 1200 and HD 1080P •Video amplifier bandwidth: 2.5Gpbs/250MHz •External power supply (included): 2A 5VDC for 110V (neither included nor required for #33-10532) MCM Part # 33-10532 33-10533 33-10535 Description 2 x 1 3 x 1 5 x 1 (1-4) $26.25 34.85 52.00 (5-up) $20.65 31.83 46.39 Three Input Manual/ Automatic HDMI Switch •3-in-1 out switching •HDCP compliant •Manual source selection switch •Automatically switches to active source •No AC adapter needed •Mfr. #HS103 MCM Part # 33-12115 www.MCMelectronics.com /1-800-543-4330 ONLY $28.90 229 1 Audio/Video - Distribution Two Way HDMI Switch Two-way switch allows two high definition video sources to be connected to a single display. Automatic operation selects last source that was powered on, or manually select between sources via the push button switch. Features: •Automatic or manual selection •Supports HDTV up to 1080p and PC resolution up to 1900x1200 •1.3 and HDCP passthrough compliant •24K gold plated connections MCM Part # 33-12200 ONLY $20.59 Compact 3x1 HDMI Selector Low cost switch provides high reliability and is compatible with all HD formats up to 1080p. Features: •Connect up to three HD devices to a single monitor •Automatic or manual input selection •12bit Deep color and HDMI 1.3b compliant •Dimensions: 0.6" (H) x 2.0" (W) x 2.0" (D) •Powered from HDMI signal cable, no external power required MCM Part # 33-12720 ONLY $16.99 Four Input Manual/Automatic HDMI Switch •4-in-1 out switching •Compliant with HDMI/HDCP requirements •Remote control •Automatic source detection •RS-232 control support •Mfr. #HM41SR MCM Part # 33-12110 HDMI Video 8 x 8 Matrix Switcher with Category 5 Active Baluns •HDMI (Deep Color) •HDCP compliant •Allows any source to be displayed on multiple displays at once •Supports 7.1 channel digital audio •Matrix master can switch every output channel to any HDMI input by push button, IR remote control, or RS-232 control •Allows control of main matrix center through control line at remote receiver •Allows control of local HDMI sources such as DVD and TiVo® by IR extender through control path at remote receiver •Easy installation with rack-mounting and wallmounting designs for master and receiver respectively •Network control via RS-232 or USB interface •Remote powering of HSMR receivers •Remote HSMR receivers have digital readout of selected channel •Includes eight Cat 5 to HDMI receivers •Mfr. #HSW88C MCM Part # 33-12120 ONLY $4500.00 Compact self-powered switch measures less than 2" square, and allows selection of two HDMI sources to a single HD display. Features: •LED indication of selected source •Rugged metal housing •Bi-directional capability also allows single source to two display switching (one display at a time) •V1.4/3D compatible, HDCP compliant •Self powered, no external power source required ONLY $19.99 Audio/Video Selector •Perfect for the entertainment center •Combines four different video devices (VCR, laser disc player, etc.) into one output •Compatible with both mono and stereo devices •Four audio/video inputs, one audio/ video output •20Hz~10MHz frequency range •Isolation 30dB minimum MCM Part # 32-4420 ONLY $119.00 Back 4 x 2 Component Video Matrix The SW204HD allows a user to connect up to four component video sources to two different displays, and can be controlled via USB, RS232, the included remote control, or the front panel interface. Features: •Infrared remote learning function •LED status indicators •Included remote control •PC control software included •Component video and coaxial digital audio support •Rackmount ears included MCM Part # 33-12095 ONLY $205.00 HDMI Scaling Media Center •This six-input media center switch allows you to scale all source inputs to 1080p and send them over a single HDMI cable to your display •Perfect solution for utilizing older A/V equipment or PCs with new high-definition displays •Switch among six sources: Two HDMI, two analog (composite, S-video, or component), and two VGA Specifications: •HDMI v1.3, HDCP (Input pixel clock rate: 25MHz~225MHz) •Supports video up scaling to 1080p (pixel clock rate: 25MHz~165MHz) •3D Y/C separation comb-filter •Aspect ratio: 4:3 or 16:9 •10 bits video processor for analog to digital conversion •IR remote control and manual control •Dimensions: 133⁄8" x 63⁄4" x 15⁄8" •5VDC, 4A power supply (included) MCM Part # 33-10800 ONLY $284.99 Component Video Matrix •Unbalanced stereo audio inputs and output •Simultaneous audio and video switching •Gold-plated connectors •Solid-state audio and video switching •Switch noise does not affect signal quality •Mfr. #EZ-AVX4X 230 High quality selector allows two video monitors to independently select from up to four high definition HDMI A/V sources. Independent front panel push button controls for each monitor output provide LED indication of the source selected. Additionally, TOSLINK and coaxial digital audio output is provided, allowing audio signal to be fed to a separate system. Features: •IR remote control •Supports 3D video and HDCP 2.0 •Supports 1080p/12-bit Deep Color •Supports all digital audio formats •Dip switch selectable auto detection and auto adjustment modes •Rugged metal enclosure •Requires 5VDC/2A, AC adapter included •Dimensions: 11⁄8" (H) x 85⁄8" (W) 23⁄4" (D) Back ONLY $21.62 Four Input A/V Switcher MCM Part # 555-18824 HDMI 4x2 Matrix Selector MCM Part # 33-12500 HDMI 2x1 Switch MCM Part # 33-12555 ONLY $120.00 ONLY $178.88 •High bandwidth and low crosstalk provides maximum picture performance •View different sources on each monitor •Separate RGB+audio inputs and outputs •Source and monitor selection by RS232, RS-485 or manual selection •Custom application for remote PC control •Integrated rack mounts •Four rack spaces •12Wpower consumption MCM Part # 33-12100 33-12105 Matrix 4 x 4 8 x 8 Mfr. # SW404HD SW808HD ONLY $1141.00 1855.00 www.MCMelectronics.com /1-800-543-4330 Audio/Video Switcher Add additional components to your TV and home theater system by providing additional A/V inputs to your system. Four A/V inputs including composite video and Y/C (S–video). •Mfr. #SVS-14 MCM Part # 80-3450 ONLY $26.77 Follow us on: & Distribution - Audio/Video Wireless Cable TV Kit Back Six-Way Video Selector Top Tabletop video switcher provides independent selection of up to six A/V sources, routing them to two different destinations. Select from inputs such as a satellite receiver, digital cable box, DVD player, DVR, VCR or video game. Dual outputs, with independent selectors, allow easy recording of one source, while viewing another, or viewing of two different sources on separate monitors. Inputs and outputs are standard line level L/R audio, composite video, and S-video. S-video connections are standard four-pin DIN female, all others are RCA type female. Rugged metal enclosure measures 13⁄4" (H) x 111⁄2" (W) x 51⁄4" (D), including non-skid rubber feet. Note: Either composite or S-video inputs may be utilized, but not both. This selector will not convert from one video format to the other. Passive device requires no power. Limited quantities. MCM Part # 50-7780 ONLY $44.99 Input Source Switch Boxes Tabletop control box Back allows selection of multiple input sources. Ideal when connecting several audio devices, such as CD players, VCRs, laser disk players and satellite receivers to home stereo equipment. Models available to select from three, four or five sources. Internal PC board design provides quiet, reliable operation. All connections are all RCA type female. Metal case has non-skid rubber feet and stays securely fixed in place. Dimensions: 6.9" (W) x 2.2" (H) x 3.9" (D). MCM Part # Positions 50-6170 Three 50-6175 Four 50-6180 Five (1-5) $12.99 13.99 14.99 (6-9) $11.99 12.99 13.99 (10-up) $11.50 12.50 13.50 Three-Way Audio/Video Switch Box Tabletop control box allows selection of multiple A/V sources. Ideal when connecting several devices, such as CCTV cameras, camcorders, VCRs, laser disk players and satellite receivers to a single video monitor or VCR. Accommodates video and left and right audio, all connections are all RCA type female. Metal case has non-skid rubber feet and stays securely in place. Dimensions: 6.9" (W) x 2.2" (H) x 3.9" (D). Sloped front, black color. (1-5) $12.99 (6-9) $12.25 (10-up) $11.50 Three-way rotary selector expands inputs/outputs for optical audio equipment. The unit has a positive locking mechanism to ensure high integrity connections and optimum light signal transfer. Features: •Expands input/output options •Clear selection indicator •High integrity connections •Suitable for either TOS-link or 3.5mm optical connections •Ideal for connecting three pieces of digital audio equipment to one optical input on an amplifier •Dimensions: 1.2" (H) x 5.3" (W) x 4.3" (D) MCM Part # 33-12735 MCM Part # 50-8385 ONLY $50.99 MCM Part # 80-7265 ONLY $207.50 Wireless A/V sender is capable of wirelessly transmitting a signal up to 300' via the 2.4GHz wireless band. Unit is also capable of transmitting IR signals up to 200'. Features: •Four selectable channels •Composite video and RCA L/R audio inputs and outputs •Built-in dipole antenna •Required power: 6VDC, 500mA (adapter included) •Mfr. #07-000-100-10 MCM Part # 80-7047 ONLY $92.69 ONLY $3.99 5.8GHz Wireless A/V Sender Wireless A/V sender is capable of wirelessly transmitting a signal up to 300' (line of sight) via the 5.8GHz wireless band. Unit is also capable of transmitting IR signals up to 200'. Features: •Eight selectable channels •Composite video and RCA L/R audio inputs and outputs •Built-in dipole antenna •Required power: 6VDC, 500mA (adapter included) •Mfr. #06-081-001-08 Automatic A/B Line Level Switch This switching device automatically selects between two line level sources to a single input. L/R RCA female input/ output connections accommodate left and right channels, making it perfect for all consumer electronic devices. Default input-A is selected when no signal is present. When a signal is sensed at input-B, the selector automatically switches to that input. A separate 12VDC, 100mA signal is also provided to trigger other external devices. Trigger sensitivity is fully adjustable from 10~100mV. Off delay (from B back to A after absence of signal) is adjustable in eight steps from 0.5 seconds to 10 minutes. This unit requires 12VDC. Optional AC adapter available (#50-8362). This unique kit allows you to watch cable or satellite TV on a main television and at the same time send the signal to a second TV. That TV can then watch channels independently of what is being viewed on the main TV. Features: •Send cable, satellite, DVDs, TiVo, DIRECT TV® and more to televisions anywhere in the home •Watch a different channel than the main TV •No additional cable boxes or video distribution required •No wires to run, no holes to drill •Works through walls, floors, doors and windows •Four selectable frequencies to eliminate the interference •Extra receivers available for multiple TVs 2.4GHz Wireless A/V Sender Three-Way Toslink Selector MCM Part # 50-6195 1 MCM Part # 80-7046 ONLY $95.78 Wireless Audio/Video Transceiver The VideoConnection uses state of the art 2.4GHz technology to transmit crisp clear video and audio signals through the walls and between the rooms in a house. The hidden high gain antenna reduces interference. Use the VideoConnection to send the audio/video signals from a satellite receiver, VCR, camcorder, DVD or other video source to a TV in a different room. MCM Part # 33-4725 ONLY $114.33 www.MCMelectronics.com /1-800-543-4330 231 1 Audio/Video - Distribution SATV/CATV Signal Distribution A #33-11730 B #33-11800 #33-11832 Outdoor Digital Ready Directional Taps C Meets or exceeds frequency range and RF shielding specifications for use with digital and broadband cable services. Features: •Bandwidth: 5~100MHz •Can be stand or pedestal mounted •Aluminum housing and stainless steel hardware •Weather tight gaskets D Indoor Splitters Performance to 1000MHz. 2, 3, 4 and 8 way models. Die-cast housing. RF shielding. Mounting tabs and grounding blocks. Fig. A B C D MCM Part # 33-2900 33-2905 33-2910 33-2915 Description 2-way 3-way 4-way 8-way (1-9) $1.09 1.79 3.39 6.59 (10-up) $0.99 1.69 2.99 5.99 Indoor Digital Ready Splitters Meets or exceeds frequency range and RF shielding specifications for use with digital and broadband cable services. Features: •Bandwidth: 5~100MHz •Mounting tabs •Grounding blocks •Heavy-duty die-cast housing MCM Part # 33-11700 33-11705 33-11710 33-11715 33-11720 Mfr. # DGS-2 DGS-3 DGS-3B DGS-4 DGS-8 Description 2-way 3-way 3-way balanced 4-way 8-way ONLY $3.08 4.11 4.11 4.62 7.71 NEW! 3-Way Antenna/ Cable TV Splitter Designed for cable drop use, this three way splitter is perfect for all cable TV and outdoor antenna applications, where a signal needs to split to three destinations. It's fully weatherproof housing and weather-sealed female F connectors allow outdoor use, and attached ground lugs allow direct connection of ground lead. Features: •Frequency range: 5Mhz ~ 1,000MHz •Signal loss: 7.5dB on two taps, 3.5dB on one tap •Nominal Impedance: 75ohm •Weather-sealed vertical F ports •Blocking Capacitor on all ports MCM Part # 33-2201 232 ONLY $0.99 MCM Part # Two Output 33-11800 33-11802 33-11804 33-11806 33-11808 33-11810 33-11812 33-11814 33-11816 33-11818 33-11820 Four Output 33-11832 33-11834 33-11836 33-11838 33-11840 33-11842 33-11844 33-11846 33-11848 33-11850 Mfr. # dB Loss DMT-100.00-2-4 DMT-100.00-2-8 DMT-100.00-2-11 DMT-100.00-2-14 DMT-100.00-2-17 DMT-100.00-2-20 DMT-100.00-2-23 DMT-100.00-2-26 DMT-100.00-2-29 DMT-100.00-2-32 DMT-100.00-2-35 4dB 8dB 11dB 14dB 17dB 20dB 23dB 26dB 29dB 32dB 35dB $20.59 20.59 20.59 20.59 20.59 20.59 20.59 20.59 20.59 20.59 20.59 DMT-100.00-4-8 DMT-100.00-4-11 DMT-100.00-4-14 DMT-100.00-4-17 DMT-100.00-4-20 DMT-100.00-4-23 DMT-100.00-4-26 DMT-100.00-4-29 DMT-100.00-4-32 DMT-100.00-4-35 8dB 11dB 14dB 17dB 20dB 23dB 26dB 29dB 32dB 35dB 23.47 23.47 23.47 23.47 23.47 23.47 23.47 23.47 23.47 23.47 A ONLY B D E C F #33-11752 Indoor Digital Ready Directional Taps Meets frequency range and #33-11774 RF shielding specifications for use with digital and broadband cable services. Features: •Bandwidth: 5~100MHz •Mounting tabs •Grounding blocks •Heavy-duty die-cast housing MCM Part # Single Output 33-11730 33-11732 33-11734 33-11736 33-11738 33-11740 33-11742 33-11744 33-11746 33-11748 Two Output 33-11752 33-11754 33-11756 33-11758 33-11760 33-11762 33-11764 33-11766 Four Output 33-11774 33-11776 33-11778 33-11780 33-11782 33-11784 33-11786 Mfr. # Attenuation ONLY DGT-6 DGT-8 DGT-10 DGT-12 DGT-14 DGT-16 DGT-18 DGT-20 DGT-24 DGT-30 6dB 8dB 10dB 12dB 14dB 16dB 18dB 20dB 24dB 30dB $3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.08 DGT-2-8 DGT-2-10 DGT-2-12 DGT-2-14 DGT-2-16 DGT-2-18 DGT-2-20 DGT-2-24 8dB 10dB 12dB 14dB 16dB 18dB 20dB 24dB 3.59 3.59 3.59 3.59 3.59 3.59 3.59 3.59 DGT-4-10 DGT-4-12 DGT-4-14 DGT-4-16 DGT-4-18 DGT-4-20 DGT-4-24 10dB 12dB 14dB 16dB 18dB 20dB 24dB 6.17 6.17 6.17 6.17 6.17 6.17 6.17 A G B C RFI Splitters Professional Trunk Grade Splitters •For use in applications where additional shielding is needed •100dB case design exceeds FCC equirements for RF shielding •25% more zinc content than standard splitters •Case thickness increased by 50% to obtain very good RFI performance •Mounting tabs with screws and grounding block •5MHz~1000MHz frequency response H Designed for L-band distribution systems requiring high frequency, high performance components. J Features: Bandwidth: 10Hz~2150MHz •Zinc die-cast hybrid case Fig. MCM Part # Mfr. # Single Port Power Passing A 33-11860 LPD-2 B 33-11870 LPD-4 C 33-11875 LPD-6 D 33-11880 LPD-8 All Ports Power Passing E 33-11861 LPD-2P F 33-11865 LPD-3P G 33-11871 LPD-4P H 33-11876 LPD-6P J 33-11881 LPD-8P Description ONLY Two-way Four-way Six-way Eight-way $4.62 8.74 16.47 19.04 Two-way Three-way Four-way Six-way Eight-way 5.65 7.71 9.77 16.98 19.56 www.MCMelectronics.com /1-800-543-4330 Fig. A B C MCM Part # 33-2130 33-2135 33-2140 Type 2-way 3-way 4-way (1-9) $2.19 2.99 3.49 (10-up) $1.94 2.59 3.29 75ohm Power Blocked Terminator Standard “F” connector. Sold individually. MCM Part # 33-11885 ONLY $5.14 Follow us on: & 1 Distribution - Audio/Video B A Solder Back Indoor/Outdoor Directional Couplers and Taps NEW! A Blonder Tongue offers a complete line of professional quality indoor/outdoor couplers and tapoffs covering frequencies up to1000MHz. These products are available in both an L or T style cases. The variety of loss values offered guarantees that they have the right product for your application. These products feature a durable outdoor rated soldered back, cast housing, which shields against EMI and RFI disturbances. MCM Part # Loss (dB) A. L Style-SCW models 33-2941 4 33-2946 6 33-2951 9 33-2956 12 33-2961 16 33-2966 20 33-2967 24 33-2968 27 33-2969 30 B. In-Line Style-SRT models 33-2971 4 33-2976 6 33-2981 9 33-2986 12 33-2991 16 33-2996 20 33-2997 24 33-2998 27 33-2999 30 (1-9) (10-up) $3.24 3.24 2.70 3.24 3.25 3.24 2.59 2.59 3.11 $2.90 2.90 2.42 2.90 2.91 2.90 2.35 2.35 2.82 3.08 3.08 2.70 2.70 3.08 2.70 3.08 3.08 2.59 2.80 2.76 2.42 2.42 2.76 2.42 2.76 2.76 2.35 The Channel Plus bi–directional splitter/ combiners provide a 1GHz\bandwidth and are ideal for antenna and coaxial cable operations. It can be used to split a signal from a source or combine signals from multiple sources onto one coax run. DC & IR Passing Yes Fig. A B C D MCM Part # 33-2185 33-2190 33-2195 33-2145 DIRECTV® compatible high frequency performance to 3GHz. •Tin-plated zinc die-cast housing with soldered back to achieve RFI -130dB •Waterproof and airtight up to 30 P.S.I. with 4.55mm grounding hole and stainless steel screws •Low thru loss and high isolation with patent pending 360° insert pin. Bandwidth: 5MHz~3000MHz. D Type 2-way 3-way 4-way 8-way A ONLY $2.49 3.49 3.99 7.99 B MCM Part # 33-10245 33-10246 33-10247 Description 2-way 3-way 4-way (ea.) $3.63 4.11 4.62 (2-up) $2.45 3.97 4.43 D E High frequency splitters used for satellite and DSS applications. Power passive to operate in–line amps and multi-switches. Bandwidth: 5MHz~3000MHz. C One Port Power Passing Splitter/ Combiners MCM Part # 33-2220 33-2205 33-2210 Outputs Two-Way Three-Way Four-Way ONLY $2.59 3.29 3.79 75ohm TV Interference Filters MCM Part # 33-0070 (1-9) $2.39 (10-99) $2.19 (100-up) $2.09 Audio from the FM band can overcome the audio on adjacent television channels 6 and 7 and harmonics of the FM carrier. The FM trap eliminates the entire FM band from 88 to 108MHz reducing video noise and audio interference. (1-9) $2.79 Fig MCM Part # 1 Port Passive A 33-4350 B 33-4355 C 33-4360 D 33-4365 E 33-4370 All Ports Passive A 33-4375 B 33-4380 C 33-4385 D 33-4390 E 33-4395 Description (1-9) (10-up) 2-Way 3-Way 4-Way 6-Way 8-Way $6.44 8.74 9.77 18.01 18.53 $6.17 7.88 8.95 16.68 17.26 2-Way 3-Way 4-Way 6-Way 8-Way 6.44 8.72 9.77 18.01 18.53 6.17 7.79 8.95 16.92 17.26 Mini Hi-Frequency Splitter FM Trap MCM Part # 33-341 B High Frequency Horizontal Satellite Splitters NEW! •Used in cable or antenna systems to remove interference affecting picture quality ONLY $3.99 Fig. A B C A ONLY $5.65 Separates and isolates noise/EMI caused by higher cable modem transmission signals. Improves internet download reliability and reduces cable modem “sync” problems. Easily plugs into coax wall jack allowing dedicated runs to a cable modem and TV tuner. •Frequency range: 10~770MHz •Insertion loss: <5.0db. C C Type A B C Cable Modem Isolator MCM Part # 33-10395 1GHz Splitter/Combiners 1 GHz Splitters designed to meet the latest digital and return-path requirements. Features: •SCTE compliant Flat-End F-Ports •Enhanced return path Specifications •Low intermodulation distortion •Capacitor decoupled •130 dB RFI Shielding B High Frequency RFI Splitters These splitters allow power passing to a single port, while blocking DC on all other paths, making them perfect for when a splitter needs to be placed between the amplifier and the power supply. Features: •High isolation of the RF and DC paths •Separate DC bypass core material •Withstands high impulse spikes •1GHz rated Splitter/Combiner Insertion MCM Part # Description Loss 2512 2–way 3.5 dB A C B (10-49) $2.49 Mini hi-frequency splitter saves space in confined areas. DC passive one port. Attached plastic cable channel provides neat installations. Bandwidth: 5~2250MHz. Measures: 2" x 2" x 1" (port to port). MCM Part # 33-4860 (1-9) $5.65 (10-up) $5.24 CATV FM Tapoff •Zinc die-cast mounting •Provides connection to stereo tuner for MTV and other FM broadcasts usually available on cable TV lines MCM Part # 33-350 (1-9) $2.17 www.MCMelectronics.com /1-800-543-4330 (10-99) $2.05 (100-up) $1.97 233 1 Audio/Video - Distribution Agile Audio/Video Modulators Voltage Blocking Coupler •Blocks DC and low frequency AC power •Solid brass body with nickel plating •Female to male fittings •22 gauge spring steel center pin •1~1000MHz bandwidth •16dB return loss •0.3dB insertion loss MCM Part # 33-0020 (1-9) $3.84 (10-up) $3.39 Low Pass Filters A ChannelPlus low pass filter is used on systems when the broadband feed is supplied by a CATV service. The filter removes all CATV channels above the pass band, allowing insertion of locally generated channels. In addition, the filters remove cable system noise which degrades the picture quality of the locally generated channels. MCM Part # LPF-470 LPF-600 LPF-750 Pass Band (MHz) 40~470MHz 40~600MHz 40~750MHz ONLY $29.99 43.99 40.15 The AM Series includes professional quality, agile audio/video modulators. These units provide audio and video modulated RF carrier on any channel in the 50~550MHz frequency range. Agile channel selection permits on-the-fly channel changes and reduces the need for large inventories of channelized products. These modulators have a wide range of standard and optional features that make them very suitable for advanced SMATV and CATV systems. The AM Series takes baseband audio and video and modulates these signals onto any channel in the 50~550MHz frequency range. Featured options: 4.5MHz audio input, video input, BNC connector, sub band output, video AGC, spectrum inversion, balanced audio input, 600ohm, composite video and 4.5MHz audio input, Z-TAC interface, digital controlparallel, digital control-serial RS-232. Includes all these options except sub-band output. Specifications: RF: •Frequency range: 50~450MHz •Frequency range: 50~550MHz •Channels: VHF, CATV (STD, HRC, IRC) •Video input level: 1.0V p-p •Frequency response: fv -0.5MHz~fv +4.2MHz: 1.0MHz •Video signal-to-noise ratio: 60dB •Input impedance: 75ohm •Audio input level: 140mV RMS •Frequency range: 20Hz~20KHz •Input impedance standard: 10Kohm, unbalanced General: •Power requirements: •Voltage: 117VAC, ±10% •Frequency: 60Hz •Mfr. #AM-60-550 MCM Part # 33-3070 ONLY $699.00 Fixed MiniType Attenuator Pads Features: Nickel-plated, solid brass body, monolithic ceramic printed circuit board, ensuring rugged construction, etched glaze-type resistors provide ±5% accuracy and excellent return loss, small 1.375" size, 22-gauge spring steel center pin, female to male fitting, not DC passive. Specifications: •Bandwidth: 100KHz~1750MHz •Return loss: 20dB typical •Accuracy: ±5% MCM Part # 33-2750 33-2755 33-2760 33-2765 33-2770 33-2775 33-2780 Description 3dB 6dB 8dB 10dB 12dB 16dB 20dB (1-9) $1.44 1.44 1.44 1.44 2.12 1.44 1.44 (10-up) $1.34 1.10 1.10 1.34 1.63 1.10 1.10 Ground Isolation Transformer (1-9) $8.99 Designed for use in headends to combine the outputs of multiple modulators and processors. The ZHC-12 has twelve (12) broFeatures high isolation between ports due to an integrated directional coupler design. The input ports of the ZHC-12 are broadband, accepting signals in the 50~450MHz frequency range. Specifications: ZHC-12 RF: •Number of inputs: 12 •Frequency range: 50~450MHz •Insertion loss: 16dB •Isolation: 40dB •Impedance-all ports: 75ohm Connectors (rear panel): •RF input(s): “F” type, female •RF output: “F” type, female •Test port (front panel): “F” type, General: •Power requirements: •Voltage: 117VAC, ±10% •Frequency: 60Hz •Power: 10W Connectors (rear panel): •RF input(s): “F” type, female •RF output: “F” type, female •Test port (front panel): “F” type, female •Mfr. #ZHC-12 MCM Part # 33-2820 5MHz~2.4GHz bandwidth for use in antenna, cable television and satellite systems. Reduces the effects of ground loops such as herringbone, beat and audio hum. MCM Part # 33-8700 Combiner ONLY $76.21 For big home theater and satellite installation jobs, buy the Snap-N-Seal connectors in packages of 50. Use with #33-1792 SNS installation tool. MCM Part # 33-1756 33-1766 33-1771 33-4151 Cable Type RG-59 RG-6 RG-6 RG-6-QS Description W/O nut seal W/O nut seal With nut seal W/O Nut Seal ONLY $43.99 39.99 47.99 39.99 Snap-N-Seal Connectors Environmentally sealed nickel plated “F” connectors for use in harsh environments. Unique 360° compression seal keeps water from seeping into the shield. The optional nut seal provides moisture protection to the entire connector. Snap-N-Seal connectors are quickly becoming the standard for the CATV and SATV industry. Must use the #33-1792 installation tool to attach the SNS connector. RG-11 connectors are sold individually. Ten per package. MCM Part # Cable Type 33-1765 RG-6 33-1770 RG-6 33-1775 33-7445 RG-11 33-7450 RG-11 Description W/O nut seal With nut seal Nut seal W/O nut seal With nut seal ONLY $9.39 32.99 3.39 7.39 8.89 Snap-N-Seal Installation Tool Works for both RG-6 and RG-59 type connectors. MCM Part # 33-1792 ONLY $79.99 Headend Passive Combiners (10-up) $8.19 Designed for use in a headend to combine the output of up to 32 single channel devices such as modulators and processors. Features: •Frequency: 5MHz~1000MHz •1RU rackmount chassis •-20dB front panel test port •RFI shielded •Dimensions: 1¾" (H) x 19" (W) x 8" (D) MCM Part # 33-11920 33-11905 33-11910 33-11915 234 Job Packaged Snap-NSeal Connectors Mfr. # HPC-8 HPC-12 HPC-24 HPC-32 Inputs 8 12 24 32 ONLY $69.99 74.99 84.99 94.99 www.MCMelectronics.com /1-800-543-4330 Hex Type Crimp Tool •For use on all RG-59 and RG-6 connectors with up to a 1⁄2" ferrule MCM Part # 22-100 (ea.) $14.99 (2-4) $12.75 Follow us on: (5-up) $11.91 & Distribution - Audio/Video 1 Signal Amplifiers “F” Driver The “F” driver incorporates two tools into one. Socket end helps get the connector into tight spaces like multi taps and rear of VCRs and televisions. The threaded end is for “F” connector insertion for easy and secure “F” connector termination. MCM Part # 33-3085 ONLY $5.59 Multi-Fit “F” Type Connectors A B •Nut and washer included •Minimum ten •#27-478 has no nut and washer Fig. MCM Part # Description A 33-460 Knurled F-81 “F” Type Male to “F” Male B 33-480 MCM Part # 33-7260 33-7265 Description RG-59 RG-6 C ONLY $0.72 0.64 Plenum RG-6 “F” Connector •Use with plenum type RG-6 coaxial cable •Use with #22-100 hex crimp tool •Ten per package MCM Part # 33-4190 ONLY $16.59 (10-49) $0.50 (50-up) - 1.09 $0.98 D Description Crimp Chassis mount Chassis mount PC mount Crimp Chassis mount ONLY $1.09 0.69 0.81 1.09 1.09 1.49 NEW! 300 OHM To 75 OHM Outdoor Balun B This matching transformer is used to connect your 75ohm coaxial cable to the common 300 twin style connection on many outdoor antennas. The CM 94444 is an industry standard balun which offers excellent matching and low loss. Features: •Connects 300 Ohm antennas to 75 Ohm cable •HD/UHF/VHF/ FM •Excellent matching, low through loss •Professional grade •Compatible with all 300 Ohm antennas •Mfr. #CM-94444 C A E D G MCM Part # 30-2570 H F “F” Type Adapters Fig. MCM Part # Description A 27-5685 Female RCA to male “F” B 27-5675 Female “F” to push-on male “F” C 27-5695 Female “F” to male RCA D 27-805 Female “F” to male 3.5mm E 27-5670 Right angle “F” adapter F 27-5915 Right angle push-on G 33-550 “F” type 75ohm terminator H 27-4245 “F” male to “N” female-nickel H 27-4250 “F” male to “N” female-gold ONLY $0.79 0.69 0.89 1.39 0.79 2.99 0.55 1.89 2.89 (1-4) $2.19 (5-9) $2.09 (10-49) $1.99 Push-On Balun •Quick connect for “F” fittings with impedance matching transformer •Minimum five MCM Part # 33-010 Take advantage of this limited opportunity on this high performance signal amplifier from Holland Electronics. Designed for use as a drop amplifier on a distributed cable system, it is suitable for any television application including indoor or outdoor antennas. Its die cast housing is hermetically sealed and completely suitable for outdoor use. Included AC adapter can be connected directly to the unit, or remotely powered over the coax cable with the optional power inserter. Return path amplification is provided, making this suitable for broadband, digital cable and similar environments. Features: •Adjustable gain in both directions •Surge protected •Integral ground lug •Forward path bandwidth: 54~1,000MHz •Adjustable gain: -5~+15dB •Max output: 25dBmV •Return path bandwidth: 5~42MHz •Adjustable gain: -8dB ~ 10dB •Maximum input: 45dBmV •Dimensions: 1" (H) x 4.5" (W) x 2.5" (W) •Limited quantities MCM Part # Mfr. # 30-2400 HCDA-1FRA-AG 30-2405 HCDA-PI 30-2406 VBC Description Bi-directional amplifier Remote power inserter DC voltage block ONLY $19.99 3.49 1.99 1x2 CATV Drop Amplifier Splitter •Weather resistant, molded plastic construction •Supplied with rubber boot MCM Part # 33-040 Frequency dB Gain ONLY 47MHz~550MHz 30dB $395.00 47MHz~550MHz 50dB 469.00 47MHz~750MHz 30dB 469.00 47MHz~860MHz 30dB 519.00 ONLY $2.69 Outdoor Antenna Balun •#27-5675 screw-on to push-on •#27-5670 right angle adapter •Minimum ten Mfr. # 5500-53 5500-55 5500-73 5500-83 Bi-Directional Cable Drop Amplifier Female “F” Type Connectors Fig. MCM Part # Cable Type A 33-885 RG-59 B 27-1175 - B 33-440* - C 27-810 - A 33-7745 RG-6 D 27-5520 - *Nut and washer included Professional quality broadband distribution amplifiers are ideal as a headend launch amplifier or distribution amplifier for any MATV, SMATV, or CATV application. Features: •19" rack mount chassis •Variable gain and slope controls •Dual push-pull hybrid modules •Test ports for both the input and output •Dimensions: 19" (W) x 1¾" (H) x 51⁄8" (D) MCM Part # 33-11925 33-11930 33-11935 33-11940 B A LRC Multi-Fit “F” type connectors are designed to fit a wide range of manufacturers RG-6 and RG-59 coax cables. Uses standard hex crimp tool (#22-100). Minimum ten pieces. RF Distribution Amplifiers Type F-81 Female Splice (5-9) $0.49 (10-up) $0.46 (50-up) $1.89 Signal amplifier sends signal to two sets with an internal NEW! 10dB signal amplifier to compensate for the split and additional cable length. It also provides a passive return path, ensuring compatibility with current digital and interactive and broadband cable systems. Features: •Sealed, weatherproof housing and F ports •Ground terminals •LED power indicator Specifications: •Frequency range: 54~1,000MHz, 5MHz~42MHz return path •Impedance: 75ohm, female “F” connector •Requires 15VDC, AC adapter included •Dimensions: 4.5" (H) x 4.63" (W) x 1.13" (D) MCM Part # 30-2470 www.MCMelectronics.com /1-800-543-4330 ONLY $25.99 235 1 Audio/Video - Distribution #30-2124 Broadband Structured Wire RF Amplifiers #30-2125 1x4 CATV Drop Amplifier Splitter Signal amplifier sends signal to up to four sets with an internal 15dB signal amplifier to compensate for the split and additional cable length. It also provides a passive return path, ensuring compatibility with current digital and interactive and broadband cable systems. Features: •Sealed, weatherproof housing and F ports •Ground terminals •LED power indicator Specifications: •Frequency range: 54~1,000MHz, 5MHz~42MHz return path •Impedance: 75ohm, female “F” connector •Requires 15VDC, AC adapter included •Dimensions: 4.5" (H) x 4.63" (W) x 1.13" (D) MCM Part # 30-2471 MCM Part # 33-10225 33-10226 ONLY $29.99 1x8 CATV Drop Amplifier Splitter Signal amplifier sends signal to up to eight sets with an internal 4dB signal amplifier to compensate for the split and additional cable length. It also provides a passive return path, ensuring compatibility with current digital and interactive and broadband cable systems. Features: •Sealed, weatherproof housing and F ports •Ground terminals •LED power indicator Specifications: •Frequency range: 54~1,000MHz, 5MHz~42MHz return path •Impedance: 75ohm, female “F” connector •Requires 15VDC, AC adapter included •Dimensions: 3.75" (H) x 4.50" (W) x 1.88" (D) ONLY $34.99 #33-8745 MCM Part # Mfr. # 30-2124 3410 30-2125 3412 30-2130 3414 30-2135 3418 Gain 15dB 11.5dB 8dB 4dB ONLY $36.55 43.76 48.91 62.99 UHF-VHF-FM Distribution Amplifier The TA-52 is a 52dB gain UHF/VHF/FM broadband distribution amplifier designed to function as a reliable, key component in medium and large MATV systems. Signal control is provided through front panel design. UHF/VHF input may be combined or separated by use of a single throw switch. Low band VHF, high band VHF and UHF frequencies have separate gain controls and switchable 10dB input attenuators. Features include switchable FM trap and backmatch -20dB test point. Specifications: •Bandwidth: Low band: 54~108MHz, High band: 174~216MHz, UHF: 470~806MHz •Gain minimum: 48dB •Output capability: 60dBmV (3 channels) •Input attenuators: 10dB •Impedance, input and output: 75ohm •Power requirements: 115VAC, 60Hz, 25W (1-9) $259.00 (10-up) $225.00 ONLY $91.66 104.03 •Instant cable provider signal strength indicator •Eliminates screw-on attenuators •Extends precise signal strength beyond typical “no-loss” distribution amplifiers •Specifically designed for HDTV broadcasting (VSB8 & QAM64) •Meets and/ or exceeds cable modem and PPV requirements •Protects equipment against voltage insertion •Eight independent adjustable attenuators (range: 0~40dB) •Nominal gain per output: 3dB+ •Forward bandwidth: 54~1.2GHz •Return bandwidth: 5~42MHz at 5dB gain •Maximum output on all 8 ports: +25dBmV/CH •Typical noise figure: < 4.5dB •Surge protection on all 8 ports: 6KV/3KA •Mfr. #70-0039 ONLY $207.03 Eight-Way Amplified RF Splitter The model H804 splitter/ combiner hub provides a grid mounted solution for distribution of television. CATV or antenna signals can be routed to four locations with the high quality on-board splitter. The splitter can alternately be used as a combiner to merge four inputs into one output. Features: •Four-way balanced design •7.8 dB insertion loss @ 1000MHz •5!1000MHz bandwidth covers FM, cable modem, VHF and UHF bands •-130dB RFI rejection •PCB design for consistent performance •Tilted 15° for easy connections •Return loss (In and Out) 20dB minimum (all frequencies) •Isolation (Out to Out) 22~25dB (all frequencies) •Six enclosure grid spaces •Dimensions: 6.25" x 1" x 2.75" MCM Part # 33-12025 ONLY $89.99 #33-8760 For broadband applications up to 1GHz including cable television and digital television. Suitable for medium sized distribution networks including homes and small condominium complexes. High gain low noise amplifier with built–in FM trap. Specifications: Frequency range 40~1000MHz. FM trap -20dB. Power: 120VAC. MCM Part # Outputs Gain Gain Adjust (1-9) (10-up) 33-8745 1 36dB 18dB $33.99 $29.99 33-8755 2 15dB 10dB 27.99 25.99 236 Gain +6.5dB gain +10.0dB gain MCM Part # 33-11045 MCM Part # 33-2680 Broadband Distribution Amps Description 1-way 2-way 4-way 8-way Description 6 output 8 output HDTV Adjustable Distribution Amplifier Distribution Amplifiers •Commercial grade distribution amplifiers can be used for HDTV, CATV, off-air, analog, and digital RF distribution •Weather sealed housings •Average noise figure: 2.8dB •50~1000MHz NEW! MCM Part # 30-2472 #30-2135 #30-2130 Compatible with the market leader of structured wiring panels, these 5~1000MHz, DOCSIS® compliant amplifier modules are the ideal drop-in replacement for CATV in-home signal distribution. Improve your multimedia application with the latest broadband technology for HDTV QAM signals. Features include a durable, salt-sprayresistant housing, weather-sealed “F” ports, and exceptional surge performance. www.MCMelectronics.com /1-800-543-4330 Multiple Dwelling Amplifier Specifications: RF: •Frequency range: 47~550MHz •Gain: 32dB •Noise figure(a): 8.0dB •Output level: +44dBmV •Gain control range: 15dB •Slope control range: 10dB •Impedance all ports: 75ohm General: •Power requirements: •Voltage(d): 117VAC, ±10%, 24 •Frequency: 60Hz •Power: 13W •Mfr. #ACA 30-550 MCM Part # 33-2875 ONLY $159.00 Follow us on: & Distribution - Audio/Video 1 #DA-550BID High Headroom Distribution Amplifier The DA-550 series is designed with the highest headroom available in a distribution amplifier. Traditional panels are not designed to handle the radical variations in signal strengths that have come about with HDTV. New technologies such as HDTV create special problems for current video distribution panels. The DA-550s can #DA-550HHR handle an extremely wide range of input signals from today’s NTSC and tomorrow’s digital TV. With outputs to eight televisions, coax runs up to 150', three inputs, one from a CATV or antenna and two from modulators, the DA-550 is the heart of a multi-room distribution system. The DA-550BID offers a 5~42MHz return path for bi-directional communication for use with cable modems and pay-per-view applications. The DA-550HHR is used with high performance antenna applications for off air digital and NTSC signals. Additional features: IR engine, remote power and expandable outputs. MCM Part # DA-550BID DA-550HHR ONLY $184.99 190.49 Broadband Amplifiers The BIDA Series are professional quality, broadband, two-way capable, indoor hybrid distribution amplifiers that are designed for RF distribution systems, such as apartment complexes, hospitals, schools, prisons, hotels, and a wide variety of similar applications. The BIDA Series is ideal for multi-channel RF distribution systems whose input source is a “cable drop” or the output of a MATV/SMATV/ CATV headend. Additionally, the BIDA Series may be used as the launch amplifier in a distribution network. These amplifiers use dual push–pull hybrid modules, capable of delivering high output levels with low distortion, even in systems with over 100 channels of programming. Power doubling models can be cascaded together with lower distortion resulting than the push–pull amplifiers allowing the system to maintain higher signal integrity. The gain and slope controls are designed between the hybrid modules for optimum noise figure, input return loss and output capability. Test ports for both the input and output are provided for testing signal levels without interrupting service. The BIDA Series come in a rugged, aluminum chassis that provides exceptional heat dissipation. This allows the BIDA Series to be operated at high ambient temperatures with no degradation of performance or reliability. The combination of features and durable construction ensures that the BIDA Series will provide years of reliable, trouble-free service. Bandwidth MCM Part #MHz 33-7815 49~550 33-7820 49~750 33-7855 49~860 Gain dB 50 32 44 Description ONLY Push–pull $439.00 Push–pull 519.00 Power doubling 659.00 50MHz~1HGz Broadband Amplifier Bidirectional Broadband Distribution Amplifiers Ultra low noise amplifier employs high output push-pull design, with frequency range of 50MHz~1GHz, providing up to 34dB gain. Additionally, a passive 5~42MHz return path enables use with cable TV systems that utilize interactive digital boxes and broad band internet service. Variable gain and tilt adjustments allow installer to compensate for a wide range of cable lengths. Features: •Wide forward frequency range: 50MHz~1GHz •Ultra low noise figure •Push-pull SMD strip line circuit design •-20dB input and output test •115VAC operation, no space consuming AC adapter Specifications: •Specifications Forward frequency range: 54~1000MHz •Forward gain: 34dB •Gain adjustment range: 15dB •Max input level +5 dB •Max ouput level: 39dB •Return frequency range: 5~42MHz •Return insertion loss: 2.5dB •Power requirements 117VAC, 60 Hz, 6 W •Dimensions 2" (H) x 3-3/8" (W) x .8" (L) MCM Part # 33-2675 (1-9) $129.99 (10-up) $109.00 Professional quality distribution amplifiers are ideal for multi-channel RF distribution systems where the input source is a “cable drop” or the output of an MATV/SMATV/CATV headend. Features: •Integrated passive or active return path •36MHz/49MHz split •Input and output test ports •Active return: 5MHz~36MHz •External power transformer providing 26VAC enabling amplifiers to be remotely powered via low voltage AC wiring •Push-pull hybrid technology MCM Part # 49MHz~1000MHz 33-11890 49MHz~860MHz 33-11895 33-11900 Mfr. # dB Gain ONLY 5800-13 30dB $609.00 5800-83 5800-84 30dB 44dB 569.00 599.00 ACA-30-75R Antenna or CATV Distribution Amplifier Professional quality broadband indoor hybrid distribution amplifier is designed for RF distribution systems such as apartment complexes, hospitals, schools, prisons and hotels. The ACA 30-75R amplifier has a flat 30dB of operational gain, which is variable using a built-in gain control, plus a passive return path, making it suitable for all interactive digital cable systems. Features: •RF: Frequency range: 47~550MHz •Forward gain: 32dB •Gain control range: 15dB •Slope control range: 10dB •Impedance all ports: 75ohm •Mfr. #5770 MCM Part # 33-2876 ONLY $279.00 Push-Pull Amplifiers The CA-30 is a highquality push-pull amplifier producing signals with extremely low distortion and harmonic content. The CA-30 enclosure uses a black anodized aluminum extrusion to assure reliable heat sinking and corrosion resistance. Features: •Wide frequency range: 54MHz~550MHz, 30dB gain, adjustable slope control, adjustable gain control, input and output test points, designed for CATV apartment distribution systems Specifications: •Bandwidth: 54~550MHz •Gain: 30dB •Gain adjust range: 0~8dB •Power requirements: 115VAC, 60Hz, 4W •Slope: 0~8dB variable •Noise figure: CA-30, 5.0dB MCM Part # 33-2670 (1-9) $139.05 (10-up) $131.84 15dB RF Amplifier ZTA-35 Specifications: RF: •Frequency range: 54~216MHz, 470~806MHz •Input level min: -7.0dB(LB/FM), -6.0dB(HB), -6.8dB(UHF) •Input level max: +14dB, 36dB(LB/FM), 35dB(HB), 37dB(UHF) •Noise figure: 6.0dB(LB/FM), 7.0dB(HB), 6.2dB(UHF) •Output level max: 49dBmV •Gain control range: 18dB •FM trap depth (95~108MHz): -18 •Impedance all ports: 75ohm General: •Power requirements: Voltage: 117VAC, ±10% •Frequency: 60Hz •Power: 15.0W •Mfr. #ZTA-35 MCM Part # 33-2860 ONLY $109.00 Specifications: RF: •Frequency range: 54~220MHz, 470~900MHz •Input level min: -7.0dB •Input levelmax: +18dB •Gain: 16dB (50~22), 12dB (470~800), 10dB (800~900) •Noise figure: 3.0dB (VHF), 4.0dB (UHF) •Output level max: +44dBmV •Impedance all ports: 75ohm General: •Power requirements: •Voltage: 117VAC, ±10% •Frequency: 60Hz •Power: 4.2W •Mfr. #ZTA-15 MCM Part # 33-2850 (1-9) $18.53 www.MCMelectronics.com /1-800-543-4330 (10-up) $17.49 237 1 Audio/Video - Distribution Bi-Directional CATV Amplifiers Digital amplifiers with return path for use with CATV convertors (pay per view) and cable modems. Soldered back ensures isolation and signal integrity. Specifications: Bandwidth: 54~1000MHz. Noise figure: 3.5dB. Power: 12VDC, 250mA via included adapter (using “F” cable). MCM Part # Forward Gain Reverse Gain (1-9) (10-up) 33-7110 15dB 0dB (Flat) $44.79 $40.70 33-7111 15dB 10dB 49.94 44.68 UHF/VHF/FM 36dB Amplifier ZTA-25 Features: •Low noise •Two switchable FM traps •Separate gain controls •AC power indicator •50dB output capability •-20dB monitor output •Fuse protected Specifications: •Bandwidth: 54MHz~108MHz, 174MHz~216MHz, 470MHz~812MHz •Gain: VHF, 31dB; UHF, 36dB •75ohm input/output •Power requirements: 115VAC; 60Hz •Dimensions: 83⁄4" (L) x 17⁄8" (H) x 33⁄4" (D) •Fuse protected MCM Part # 33-0890 (1-9) $98.87 #33-2840 (10-up) $91.64 Specifications: RF: •Frequency range: 470~890MHz •Input level min: -8.5dB •Input level max: +22dB •Gain: 25dB(LB/FM), 22dB(HB), 18dB(UHF) •Noise figure: 5.0dB(VHF), 7.0dB (UHF) •Output level max: +47dBmV •FM trap depth (95~108MHz): -25 •Impedance all ports: 75ohm General: •Power requirements: Voltage: 117VAC, ±10% •Frequency: 60Hz •Power: 3.0W •Mfr. #ZTA-25 •Limited quantities MCM Part # 33-2855 #33-2845 DA-520A 10dB Micro Amplifier The DA-520A is a bi–directional amplifier providing 20dB of forward gain and 0dB reverse gain. Specifications: Bandwidth: 54~806MHz. Gain: 20dB +/- 1dB. MCM Part # DA-520A The Titan range of mast mounted amplifiers has been completely reengineered and updated. These amplifiers represent the ultimate in preamplifier performance. They are designed for use as an ultra low noise, ultra high gain preamplifier for deepest fringe applications and MATV headend applications. Their very high signal handling also makes them suitable for use as a mast mounted, ultra low noise distribution amplifier for use in small MATV systems. Both models feature 75ohm, input and output connections in line with modern headend engineering practice. Models 7777 and 7778 cover both VHF and UHF bands with separate amplification in each band for maximum signal handling. They may be configured for either separate or combined VHF and UHF inputs. They include a switchable FM trap. MCM Part # 33-8960 33-8965 238 Broadband Distribution Amplifiers ONLY $70.69 TITAN 2TM Mast Mounted Preamplifiers Mfr. # 7777 7778 VHF Gain 23dB 16dB UHF Gain ONLY 26dB $64.99 23dB 64.99 ONLY $17.69 The ZCM Series includes professional quality, broadband distribution amplifiers, designed for special purpose applications in the MATV, SMATV, private and wireless cable markets. These amplifiers cover the 50~550MHz frequency range and provide low noise amplification at a reasonable cost. Two models are available with either 10 or 20dB of gain, each capable of accepting a relatively high input level. Specifications: ZCM-101 RF: •Frequency range: 50~550MHz •Gain: 10dB •Noise figure: 3.5dB •Impedance-all ports: 75ohm General power requirements: •Voltage: 117VAC, ±10% •Frequency: 60Hz •Power: 1.2W •Connectors (top panel): •RF input: Type “F”, female RF output: Type “F”, female ZCM-201 RF: •Frequency range: 50~550MHz •Gain: 20dB •Noise figure: 3.5dB •Impedance all ports: 75ohm General power requirements: •Voltage: 117VAC, ±10% •Frequency: 60Hz •Power: 1.4W •Controls (top panel): Tilt: Var. Control •Connectors (top panel): RF Input: Type “F”, female •RF output: type “F”, female MCM Part # 33-2840 33-2845 Mfr. # ZCM-101 ZCM-201 10dB micro amplifier with 45~1000MHz bandwidth. Soldered back ensures 130dB RFI shielding. Heavy-duty tin plated zinc housing. Specifications: Noise figure: 7dB. Power: 12VDC, 100mA. via included adapter (using “F” cable). MCM Part # 33-7125 (1-9) $23.16 (10-up) $16.07 25dB RF Signal Amplifier •Bandwidth: 50~860MHz •For indoor use only •Operates on 12VDC, 200mA (adapter included) MCM Part # 30-2167 ONLY $11.99 ONLY $7.99 14.69 Mast Mount Antenna Amplifier NEW! 30dB Signal amplifier attaches directly to the antenna mast and provides significant signal gain for all television and FM reception including digital and HDTV and HD radio. Included power inserter provides power to the amplifier over the existing signal coax. Specifications: •Frequency range: 50~860MHz •Gain: 30dB •Impedance: 75ohm, female “F” connectors •Requires 12VDC, AC adapter included •Dimensions: 3.75" (H) x 4.25" (W) x 2.25" (D) This powerful UHF/VHF antenna signal amplifier is designed to overcome signal loss related to long cable runs, splitters, and junctions. While an amplifier will not create a signal, it will increase its power and minimize disruptions. Kit includes •Mast mount amplifier •110VAC power inserter •6' coaxial cable Frequency range: •40~862MHz •18db gain •Mfr. #PA18. MCM Part # 30-2465 MCM Part # 30-2091 ONLY $24.99 www.MCMelectronics.com /1-800-543-4330 Outdoor Mast Mounted Amplifier ONLY $46.99 Follow us on: & Distribution - Audio/Video 1 RG6 3GHz Coax Cable A B Professional high-grade dual shield coax cable suitable for digital HDTV, CATV, MATV and digital satellite RF distribution. Features: •Fully sweep tested to 3000MHz •18AWG solid bare OFC center conductor with 100% overlapping aluminum mylar foil shield and 60% aluminum braid •Gas injected foam polyethylene dielectric •UL/CSA approved; CM/CL2 rated for inwall use •Impedance 75ohm •Outside diameter 7.6mm nominal •Put-up: reel-in box C Variable Attenuator For those living very close to transmitting towers, problems with multipath interference can occur because the signals are so strong that they bounce off nearby buildings and other objects and cause multiple images to appear on one’s TV screen. This attenuator allows users to dial down the signal to reduce problems associated with this multipath and overloading interference. MCM Part # 30-2118 ONLY $12.86 RF Amplifiers Low noise VHF/UHF/FM signal amplifiers. Variable gain control –10dB. Built–in FM trap (-20dB). Specifications: Frequency range: 40~862MHz. Noise figure: <7dB. Power: 120VAC. Fig. A B C MCM Part # 33-8715 33-8720 33-8725 Outputs 1 2 4 Gain 30dB 25dB 20dB ONLY $19.99 24.99 20.99 In-Line Surge Protector Protect your cable modem, tuner, convertor, decoder, and satellite receiver from power surges and spikes caused by lightning strikes. Plugs directly into coax line. Specifications: •Frequency range: 5~2,400MHz •Insertion loss: 1.5dB max •Max surge current: 5000A MCM Part # 33-10400 MCM Part # 24-14605 24-14606 24-14607 24-14608 Color Black White Black White ONLY $39.99 39.99 69.99 69.99 RG6 3GHz Coax Cable Professional high-grade dual shield coax cable suitable for digital HDTV, CATV, MATV and digital satellite RF distribution. Features: •Fully sweep tested to 3000MHz •18AWG Copper Covered Steel (CCS) center conductor with 100% overlapping aluminum mylar foil shield and 60% aluminum braid •Gas injected foam polyethylene dielectric •UL/CSA approved; CM/CL2 rated for inwall use •Impedance 75ohm •Outside diameter 7.6mm nominal •Put-up: pull box MCM Part # 24-14609 24-14610 24-14611 24-14612 ONLY $3.99 Length 500' 500' 1000' 1000' Length 500' 500' 1000' 1000' Color Black White Black White ONLY $54.99 49.99 102.00 102.00 Remote Control A/B Switch •You’ll never have to leave the comfort of your chair with this infrared remote control video switch •Allows you to switch between two 75ohm inputs (cable, antenna, satellite or dual cable systems) •75ohm output (TV) •AC adapter: 120VAC/12VDC, 100mA included •5MHz~900MHz bandwidth •89dB isolation •UL listed •Remote requires two “AA” batteries not included Closed UHF/VHF Antenna Mast-Mount Combiner •All-weather antenna combiner merges the signals from a UHF antenna with a VHF antenna on the same down lead •Ideal for FM reception and markets with high band VHF HDTV channels •Threaded “F” connectors •Mast-mount weatherproof housing •Adjustable mast clamp •75ohm output MCM Part # 30-2113 ONLY $18.79 High Isolation Switches •Three–way coaxial A/B/C switch •Use for antenna, CATV or VCR •Greater than 65dB isolation through 550MHz and 50dB through 900MHz MCM Part # 33-1490 33-1485 Description A/B/C A/B (1-9) $7.99 5.99 (10-up) $7.49 5.49 MCM Part # Description 32-4425 Switch 32-4426 Replacement remote (ea.) $31.92 8.94 (2-up) $27.53 - RG6/Q Dual 3GHz Coax Cable Two quad-shield coax wires bonded together to form a single cable that facilitates two cable drops with one wire pull. Suitable for digital HDTV, CATV, MATV and digital satellite RF distribution. Features: •Fully sweep tested to 3000MHz •18AWG bare copper center conductor •60%/40% aluminum braid •Gas injected foam polyethylene dielectric •UL/CSA approved; CM/ CL2 rated for inwall use •Impedance 75ohm •Outside diameter 2 x 7.6mm nominal •Put-up: spool MCM Part # 24-14355 24-14356 1000' RG-11 PE Burial Broadband Coax RG-11/U cable with 18AWG copper-clad steel center conductor, 60% aluminum braid and 100% aluminum foil shield. Features: •SBCA compliant •UL CM rated •PVC jacket with 6.86 nominal O.D. •Dielectric: gas injected foam PE with 4.57mm O.D. •Sweep tested to 3000MHz •Foot marking every 2' •Put-up: wooden spool •Mfr. #S1D60PN-O-R1K MCM Part # 24-11096 (1-4) $199.00 (5-up) $194.00 Length 500' 500' Color Black White ONLY $144.00 134.00 RG6 3GHz Quad Direct Burial and Plenum Cable Choose from either direct burial or plenum rated RG6 quad shield coax cable for digital HDTV, CATV, MATV and digital satellite RF distribution cable drops in high moisture areas, or ceiling plenums. Features: •Fully sweep tested to 3000MHz •18AWG bare copper center conductor with 100% overlapping bonded aluminum mylar foil shield and 60% /40% aluminum braid shield •Gas injected foam polyethylene dielectric •Impedance 75ohm •Outside diameter 7.6mm nominal •Put-up: spool MCM Part # 24-14385 24-14390 Description Direct burial Plenum rated www.MCMelectronics.com /1-800-543-4330 Color Black White ONLY $199.00 469.00 239 1 Audio/Video - Distribution Set Top Boxes/Media Players High Definition Television Tuner/ Recorder High Definition Digital Tuner with HDMI and Component Video Output The CM-7001 tunes ATSC or Clear QAM signals for televisions, displays, and projectors that do not have built-in-tuners. HDMI and optical audio outputs allow for Dolby Digital quality audio and high definition video. Features: •Component, composite, and s-video outputs •L/R analog and digital optical audio outputs •Dolby® Digital audio support •Basic on-screen program information •Channel 3⁄4 RF modulator output •Included remote control •Mfr. #CM7001 MCM Part # 30-2116 ONLY $129.99 The DT-1200 tunes ATSC digital television broadcasts and is intended for use with televisions, monitors or projectors not equipped with a digital tuner. USB port allows full playback and record capability from flash drives or external USB hard drives. Playback may be viewed directly through unit, or virtually any PC. Features: •Output resolution up to 1080i •Automatic channel scan •On screen guide •Time shift and programmable recording •39 button IR remote control Outputs: •NTSC Channel 3⁄4 •Composite video •L/R line level audio •Y/Pr/Pb component video •HDMI •Coaxial audio, Dolby Digital 5.1 Supported files: •Photo: jpg, bmp and png •Music: wma, mp3, acc •Video: avi, mpg, dat, vob, mts and mjpeg Record format: mts •Dimensions: 13⁄4" (H) x 73⁄4" (W) x 61⁄2" (D) •Model #DT-1200 MCM Part # 30-2900 1080p Digital Media Player The MP60 from CE Labs allows playback of HD media on any display at resolutions up to 1080p, and is ideal for use with digital signage or in a kiosk. The MP60 can read media from a SD card, USB thumb drive or USB hard drive. Unit is also capable of displaying still images and playing audio files. Features: •Video outputs: HDMI and composite •Audio outputs: L/R audio, optical audio •Aspect ratio: 4:3, 16:9, auto •Supported video formarts: .mpeg2, .wmv, H.264, VC-1 •Supported audio formats: .mp3, .mpa, .wma, .aac •Supported photo formats: .jpg, .gmp, .gif, .png •Supported subtitles: UTF8, ASS, SSA, ACSII, SUB, SRT MCM Part # 33-11535 ONLY $109.00 ONLY $79.99 Digital Television Tuner/Recorder Model #DT-1200 •C ompact set-top-box receives free over the air television broadcasts • Compatible with all indoor and outdoor antennas • HDMI, component and composite video outputs • Left/right audio output • Coaxial output provides full 5.1 Dolby Digital • Full time shift and programmable record capability • Records to standard thumb drives and USB hard drives 240 www.MCMelectronics.com /1-800-543-4330 only $79 .99 MSRP $169.00 Follow us on: & Distribution - Audio/Video 1 Outdoor Television Antennas Power Supply Power Supply NEW! NEW! Fringe UHF/HDTV Amplified Outdoor Antenna NEW! Deep Fringe UHF/HDTV Amplified Outdoor Antenna Highly rugged, 15 element directional antenna is engineered to receive UHF signals for digital and high definition television broadcasts. Corner Yagi design provides exceptional directivity and gain. Features: •Triple boom for exceptional signal gain •Exclusive snap open design for greatly reduced installation time •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862Mhz (covers all digital channels) •Maximum gain: 13dB •Maximum front/back ratio: 25dB •Horizontal beam width: 38° •Impedance: 75ohm, female “F” connector •Overall length: 24" Highly rugged, 27 element directional antenna is engineered to receive UHF signals for digital and high definition television broadcasts. Corner Yagi design provides exceptional directivity and gain. Boom mounted signal amplifier provides increased sensitivity for increased range. Features: •Boom mounted amplifier is powered remotely, over existing coax cable •Triple boom for exceptional signal gain •Exclusive snap open design for greatly reduced installation time •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862MHz (covers all digital channels) •Maximum antenna gain: 15.5dB max •Amplifier gain: 14dB •Maximum front/back ratio: 35dB •Horizontal beam width: 38° •Impedance: 75ohm, female “F” connector •Overall length: 42" Highly rugged, 70 element directional antenna is engineered to receive UHF signals for digital and high definition television broadcasts from great distances. Corner Yagi design provides exceptional directivity and gain. Boom mounted signal amplifier provides increased sensitivity for increased range. Features: •Boom mounted amplifier is powered remotely, over existing coax cable •Triple boom for exceptional signal gain •Pre assembled antenna sections reduced installation time •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862MHz (covers all digital channels) •Maximum gain: 18dB •Amplifier gain: 14dB •Maximum front/back ratio: 27dB •Horizontal beam width: 32° •Impedance: 75ohm, female “F” connector •Overall length: 56" MCM Part # 30-2410 MCM Part # 30-2156 MCM Part # 30-2416 UHF/HDTV Outdoor Antenna (1~3) $17.99 (4–up) $16.19 ONLY $44.99 ONLY $59.99 Outdoor HDTV Television Antenna and Signal Amplifier Products • Take advantage of free programming being broadcast in your area • Today’s broadcasts provide flawless 1080i HD video and pristine digital audio • Complete reliability impervious to cable outages or satellite rain fade • Proven track record, thousands of Stellar Labs antennas are already in use Stacked Bowtie Triple Boom Yagi Amplified Signal Splitters Indoor/Outdoor Stealth Antenna •Wider pickup pattern, provides increased gain •Highly durable, provides increased directivity • Maintains signal strength when distributed to multiple sets •P erfect for outdoor installations where appearance is an issue •Thin footprint eases attic installation • Available with and without internal amplifier • Bi-directional, also suitable for broad- • Internal signal amplifier for band cable use improved performance From $14 .99 From $17.99 From $25.99 Only $39.99 www.MCMelectronics.com /1-800-543-4330 241 1 Audio/Video - Distribution NEW! NEW! Dual Quad Bay UHF/HDTV Bowtie Antenna NEW! Quad Bay Outdoor UHF/HDTV Bowtie Antenna Highly rugged, 70 element directional antenna is engineered to receive UHF signals for digital and high definition television broadcasts from great distances. Corner Yagi design provides exceptional directivity and gain. Features: •Triple boom for exceptional signal gain •Pre assembled antenna sections reduced installation time •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862Mhz (covers all digital channels) •Maximum gain: 18dB •Maximum front/ back ratio: 27dB •Horizontal beam width: 32° •Impedance: 75ohm, female “F” connector •Overall length: 56" High gain outdoor directional antenna is engineered to receive UHF signals for digital and high definition television. Bowtie design provides wider pickup pattern. Adjustable horizontal boom allows vertical sections to be independently aimed, allowing greater pickup width flexibility. Features: •Dual stacked quad bay design for increased gain •Pre assembled antenna sections reduced installation time •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862Mhz (covers all digital channels) •Maximum gain: 25dB (single direction with boom straight) •Maximum front/back ratio: 22dB •Horizontal beam width: 60° •Impedance: 75ohm, female “F” connector •Dimensions: 31.5" (H) x 32.75" (W) MCM Part # 30-2415 MCM Part # 30-2430 Deep Fringe UHF/HDTV Outdoor Antenna (1~3) $39.99 (4–up) $35.99 (1~3) $49.99 (4–up) $44.99 Compact directional antenna is engineered to receive UHF signals for digital and high definition television. Bowtie design provides wider pickup pattern, ideal when channels not all in the exact same direction. Vertical profile makes this ideal for attic mounting also. Features: •Stacked quad bay design for increased gain •Pre assembled antenna sections reduced installation time •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862Mhz (covers all digital channels) •Maximum gain: 14dB •Maximum front/ back ratio: 22dB •Horizontal beam width: 60° •Impedance: 75ohm, female “F” connector •Overall height: 31.5" MCM Part # 30-2425 (1~3) $24.99 (4–up) $22.49 NEW! Dual Bay Outdoor UHF/HDTV NEW! Bowtie Antenna Fringe UHF/HDTV Outdoor Antenna Highly rugged, 27 element directional antenna is engineered to receive UHF signals for digital and high definition television broadcasts. Corner Yagi design provides exceptional directivity and gain. Features: •Triple boom for exceptional signal gain •Exclusive snap open design for greatly reduced installation time •Heavy-duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862MHz (covers all digital channels) •Maximum gain: 15.5dB max •Maximum front/back ratio: 35dB •Horizontal beam width: 38° •Impedance: 75ohm, female “F” connector •Overall length: 42" MCM Part # 30-2155 (1~3) $25.99 (4–up) $22.49 Compact directional antenna is engineered to receive UHF signals for digital and high definition television. Bowtie design provides wider pickup pattern, ideal when channels not all in the exact same direction. Vertical profile makes this ideal for attic mounting also. Features: •Stacked dual bay design for increased gain •Pre assembled antenna sections reduced installation time •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 460~862Mhz (covers all digital channels) •Maximum gain: 8dB •Maximum front/back ratio: 22dB •Horizontal beam width: 60° •Impedance: 75ohm, female “F” connector •Overall height: 15.75" MCM Part # 30-2420 (1~3) $14.99 (4–up) $13.49 Fringe VHF/UHF/HDTV Outdoor Antenna Highly rugged, 28 element directional antenna is engineered to receive VHF-Hi and UHF signals for digital and high definition television broadcasts. It is especially useful in areas where digital broadcasts are still broadcast on VHF channels. Corner Yagi design provides exceptional directivity and gain. Features: •Triple boom for exceptional signal gain •Exclusive snap open design for greatly reduced installation time •Single combined VHF/UHF, 75ohm female “F” connection •Heavy duty construction with rugged mast clamps and associated hardware •Overall length: 43.5" Specifications (VHF): •Frequency range: 174~230MHz •Max gain: 10dB •Max front/back ratio: 16dB •Horizontal beam width: 66° Specifications (UHF): •Frequency range: 470~862 MHz •Max gain: 14dB •Max front/back ratio: 30dB •Horizontal beam width: 43° 242 Rugged outdoor antenna is designed to provide outstanding reception for all broadcast FM stations including HD radio. Fully assembled, this antenna is ready for immediate installation on an existing mast pipe or in the attic. Features: •Round dipole design •360° pick up pattern •Heavy duty construction with rugged mast clamps and associated hardware Specifications: •Frequency range: 87.5~108MHz •Maximum gain: 4dB •Impedance: 75ohm, female “F” connector •Dimensions: 17.75" diameter MCM Part # 30-2435 (1~3) $14.99 Indoor/Outdoor HD Television Antenna (4–up) $13.49 NEW! State–of–the–art antenna is designed to provide outstanding high definition television reception without the unsightly antenna appearance. It is also excellent for FM radio reception. This unit may be pole or wall mounted, and includes a shelf bracket for indoor use. Features: •Internal 40dB signal amplifier •Remotely located power inserter •Fully weatherproof housing Specifications: •Frequency range: 87.5~230MHz and 470~862MHz •Power requirements: 12VDC, 50mA, AC adapter included •Impedance: 75ohm, female “F” connector •Dimensions (excluding base): 21.5” (H) x 10.5” (W) x 4.5” (D) NEW! MCM Part # 30-2440 Outdoor Omnidirectional FM Antenna ONLY $32.99 www.MCMelectronics.com /1-800-543-4330 MCM Part # 30-2455 ONLY $39.99 Follow us on: & Distribution - Audio/Video Directional Outdoor FM Antenna NEW! Scanner Antenna Highly directional outdoor antenna is designed to provide outstanding reception for all broadcast FM stations including HD radio. It is perfect for receiving those elusive distant stations. Features: •Includes mounting hardware for connection to existing mast Specifications: •Frequency range: 87.5~108Mhz •Forward gain: 7dB •Impedance: 75ohm, female “F” connector •Overall length: 66" MCM Part # 30-2460 (1~3) $24.99 Covers VHF/UHF public service bands 30~1300MHz. Includes 300 to 75ohm matching transformer and 50' RG-6 coax cable. MCM Part # 30-1380 ONLY $46.34 FM Turnstyle FM PRO 50 FM PRO is the clear choice for the FM enthusiast. Designed to provide exceptional long-range FM reception, it may be mounted indoors or outdoors for a totally unobstructed installation. #30-1205 has a weather-proof housing and is easily installed in an attic, exterior side of the home or indoors in a closet, garage or interior wall. New Advanced Capture Circuitry™ (ACC) ensures that strong signals are locked in and weaker broadcasts are received with less noise. Terk’s exclusive Dual Drive Amplifier boosts signals above noise and interference, using a DC–driven phantom power supply that is easily connected to your receiver. #30-840 ONLY $105.00 #30-850 MCM Part # 30-855 NEW! MCM Part # 30-2645 ONLY $99.99 Compact Yagi UHF HD TV Antenna UHF HD TV Antenna Double-Bay Bowtie The CM-4220MHD digital HDTV antenna will receive both digital and analog programming. It picks up the UHF band (channels 14 thru 69) and has a reception range of 45 miles. The 4220MHD comes with a compatible DBS style 'J' mount that can conveniently mount to many surfaces. Features: •Includes DBS "J" mount •45 mile digital and HD reception range •Receives channels 14 thru 69 •Size: 5.5 x 24.5 x 15.25" •Average UHF gain: 8.2 dB •Mfr. #CM-4220 UHF/VHF/FM Antennas MCM Part # Description Boom Length Elements ONLY 30-840 Colorstar 480 150" 48 $83.42 30-850 Color King 5884 58" 25 33.78 ONLY $23.16 The CM-4228HD digital HDTV antenna will receive both digital TV and HDTV programming. This HD television antennas reception range of +75 miles. The 4228HD is one of our most popular antennas as its UHF reception is top of the line, its design is compact and this strong UHF antenna has high band VHF capabilities. Features: •75+ mile reception range •Receives channels 14 thru 69 •Size: 5.5 x 41 x 33" •Weight: 13 lbs •Average UHF gain: 11.4 dB •Mfr. #CM-4228HD NEW! MCM Part # 30-2635 •300ohm output, includes 75ohm transformer NEW! UHF Dual Quad BAY Bowtie (4–up) $22.49 •Offers the gain of a folded dipole with an omni–directional pattern •Works in areas where stations are situated in many directions MCM Part # 30-1205 1 Quad BAY Bowtie ONLY $42.99 MCM Part # 30-2630 NEW! The CM-4221HD digital HDTV antenna will receive both digital TV and HDTV programming. This HD television antenna picks up the UHF band (channels 14 thru 69) and has a TV antenna reception range of 65 miles. Features: • 65 mile digital and HD reception range •Receives channels 14 thru 69 •Size: 5.5 x 24.5 x 33" •Built in 75 Ohm transformer •Average UHF gain: 11.5 dB •Mfr. #CM-4221HD MCM Part # 30-2640 The CM-2016 digital HDTV antenna receives digital and HDTV programming in the UHF and High VHF band (channels 7 thru 69) and has a reception range of 45 miles. This high definition antenna is lightweight, compact, and comes pre-assembled. Features: •45 mile digital and HD reception range •Receives channels 7 thru 69 •Size: 36.5 x 47 x 22" •Compact and lightweight •UHF antenna with High Band VHF reception •Mfr. #CM-2016 ONLY $59.99 ONLY $44.99 NEW! Masterpiece Series UHF Directional Antenna The CM-3023 Masterpiece Antenna Series digital HDTV antenna will receive digital TV and HDTV programming. This heavy duty HD television antenna picks up the UHF (channels 14 thru 69) and has a reception range of 60 miles. This high quality antenna is designed for extreme conditions and is easy to install. Features: •60 mile digital and HD reception range •Receives channels 14 thru 69 •20 Elements •Compact and lightweight •UHF antenna with HD reception •Mfr. #CM-3023 MCM Part # 30-2650 www.MCMelectronics.com /1-800-543-4330 ONLY $69.99 243 1 Audio/Video - Distribution Indoor Outdoor Antenna Smartenna NEW! Masterpiece Series Vhf/uhf HD TV Antenna The CM-5016 Masterpiece Antenna Series digital HDTV antenna will receive both digital TV and HDTV programming. This heavy duty HD television antenna picks up the UHF, FM, and VHF bands and has a TV antenna reception range of 60 miles. This high quality antenna is designed for extreme conditions and is easy to install. Features: •UHF antenna with FM/ VHF reception •60 mile digital and HD reception range •VHF: Channels 2 thru 13 up to 60 miles •UHF: Channels 14 thru 69 up to 60 miles •15 Elements •Mfr. #CM-5016 MCM Part # 30-2655 ONLY $69.99 A high performance HDTV antenna designed for indoor or outdoor use up to 35 miles from your local TV transmitter. The CM-3000HD has been engineered to provided improved performance while reducing the size and eliminating the need for amplification in most installations. In addition to enhanced performance and reliability, the CM-3000HD was designed with the consumer in mind with an aesthetically pleasing design, with both a simple table top stand for indoors and a very versatile mounting bracket for easy outdoor mounting. Features: •35 mile digital and HD reception range •Frequency range: 174-216 MHz, 470-700 MHz •Gain: 5-8 dB •Antenna size (L x W x H): 13.38 x 11.25 x 1.5" •Indoor and outdoor ready •Mfr. #CM-3000HD MCM Part # 30-2625 Extended Range Multi-Directional UHF Antenna •Range: Up to 45 miles •Peak gain: 12 dBi •Front to back ratio greater than 18 dBi •Strong performance across UHF DTV spectrum •All-weather balun included •Flexible aiming characteristics, 60˚ beam-width •Dimensions: 23" (W) x 161⁄4" (H) x 7" (D) •Mfr. #DB2e MCM Part # 30-2320 ONLY $55.99 ONLY $49.99 NEW! Masterpiece Series VHF/ UHF HD TV Antenna The CM-5018 Masterpiece Antenna Series digital HDTV antenna will receive digital TV and HDTV programming. This heavy duty HD television antenna picks up the UHF, FM, VHF band (channels 2 thru 69) and has a TV antenna reception range of 80 miles. This high quality antenna is designed for extreme conditions and is easy to install. The Masterpiece Antenna Series is great for antenna reception markets where signal strength is weak. Features: •UHF antenna with FM/VHF reception •VHF: Channels 2 thru 13 up to 80 miles •UHF: Channels 14 thru 69 up to 60 miles •Size: 80.25(L) × 107.75" (W) •Comes assembled for easy installation •Mfr. #CM-5018 MCM Part # 30-2660 ClearStream™ Outdoor UHF/VHF HDTV Antenna Extended Range Uni-Directional UHF Antenna The ClearStream C2V delivers TV signals from widely located broadcast towers and offers flexible aiming characteristics with an extremely wide beam width of 70 degrees. Features: •Range: 50+ miles •Gain: 3.1 dBi at 216 MHz – VHF, 10.4 dBi at 670 MHz – UHF •Consistent gain through the entire UHF and VHF DTV channel spectrum •Optimized for UHF and VHF HDTV signals •Great for indoor, outdoor and attic use •Dimensions: 20" (H) x 35.5" (W) x 6.5" (D) MCM Part # Description 30-2305 Antenna with 20" mount 30-2310 Antenna with 20" mount and 30' cable ONLY $87.99 95.99 ONLY $99.99 ClearStream™ High Gain VHF Antenna NEW! Three Element Directional FM Antenna The CM-3026 Masterpiece Antenna Series digital FM antenna will receive digital or analog FM radio channels. This heavy duty antenna picks up FM channels only and has a reception range of 40 miles. This high quality antenna is designed for extreme conditions and is easy to install. The Masterpiece Antenna Series is great for antenna reception markets where signal strength is weak. Features: •40 mile FM reception range •Size: 40(L) x 70.5" (W) •3 Elements •Assembled for easy installation •Compact and lightweight •Mfr. #CM-3026 MCM Part # 30-2665 244 ONLY $49.99 Incorporating the same compact engineering which distinguishes the ClearStream family, the C5 is targeted specifically for the high VHF band. Features: •174~216MHz (Channels 7~13) •Max gain: 7.6 dBi VHF • Range: 65+ Miles •Includes UHF/VHF Antenna Combiner •Dimensions: 29" (L) x 23" (W) x 11.5" (D) •Mfr. #C5 MCM Part # 30-2315 ONLY $129.00 •Range: 10~50 miles with a gain of 14.2 dBi •All-weather construction of anodized aluminum •Designed to withstand high winds, integrated all weather ohm converter included •Strong gain across entire UHF band (channels 14~69) •Dimensions 15" (H) x 19" (W) x 39" (D) MCM Part # 30-2345 ONLY $55.99 ClearStream Outdoor FM Antenna The sleek profile of the FM 360° houses panoramic reception of FM radio broadcasts. Improvements in element technology have resulted in a compact design smaller than possible with legacy antennas. At just the fraction of the size of traditional antennas, this cutting-edge design efficiently captures standard FM radio frequencies between 88-108 MHz at levels necessary for the most reliable HD radio reception. Features: •Bandwidth: 88 - 108 MHz •Max Gain: 3.2dBi •FM Range: 55 Miles •Impedance:75 Ohm •Male F connector •Mfr. #FM360 MCM Part # 30-2355 ONLY $69.99 Omni–State Omni–Directional Antenna The Omni–State antenna provides excellent reception of VHF and UHF channels in most viewing locations. Measures 21" in diameter and has a 20dB built–in amplifier. Operates on 120VAC with the supplied adaptor. MCM Part # 30-1335 www.MCMelectronics.com /1-800-543-4330 ONLY $59.99 Follow us on: & Distribution - Audio/Video 1 #30-2104 Amplified Indoor/Outdoor HDTV Antenna #30-2102 ClearStream™ DTV Antennas •Consistently powerful reception gain across the entire DTV spectrum •Advancements in efficiency allows up to 98% of the available broadcast signal to actually reach the incoming antenna cable rather than being lost to impedance mismatches •Compact and easy to mount •Easy to assemble •Unmatched power and efficiency through advanced computer design •Engineered for extra strength and durability •UHF and DTV spectrum (470~806MHz) •Multidirectional, up to 70° of beam width #30-2106 MCM Part # Model # 30-2102 C1 30-2104 C2 30-2106 C4 Range Miles 0~30 0~50 0~65 Dimensions (H) x (W) x (D) 10" x 10" x 4.5" 20" x 10" x 5" 19" x 20" x 4.5" Gain 8 dBi 10.2 dBi 14.8 dBi Uni-Directional HDTV UHF Antennas These powerful, weather-resistant, outdoor antennas are ideal for medium to long range applications that require the gain of the antenna to be concentrated in one direction. The Yagi style design effectively rejects off axis signals from structures that cause multi-path interference, and the corner reflectors on the back of the antennas improve the forward gain of the antenna resulting in exceptional performance across the entire UHF spectrum (channels 14~69). MCM Part # Description 30-2071 Mid-sized, 43-element, long-range 30-2072 Large, high-gain, 91-element, long range Range miles 15~60 50~70+ Gain db 15.7 16.7 Dimensions (H) x (W) x (L) ONLY 19" x 18" x 62" $54.99 22" x 20" x 93" 66.99 Weight 2.5 lb. 3.5 lb. 8.5 lb. ONLY $39.99 79.99 119.99 MCM Part # 30-2066 30-2067 Description Outdoor, most popular, mid-range Outdoor, high-gain, long range Range Miles 15~55 50~70 Gain 13.7db 15.8db Superior construction and materials are designed to withstand tough outdoor conditions. Features: •Multi-directional design provides 360° reception •Integrated amplifier strengthens reception ability •High gain •Mfr. #ANT800R #30-2072 Antenna Rotator with IR Remote Control ONLY $84.99 NEW! The CM-9521A complete rotator system allows you to rotate your TV antenna, bringing in digital and HDTV programming from all directions. This kit includes the rotor drive unit which physically rotates the antenna, the rotor controller unit which programs and stores the directions in which each station is located and the control unit remote control. Engineered to ensure powerful control, maximum longevity and precision tuning of your TV antenna. Features: •One-piece cast aluminum housing •Heavy duty rotor motor •Durable powder coat paint finish •Built-in steel thrust bearings •Compatible with most universal remote controls •Mfr. #CM-9521A #30-2067 Dimensions 29" (H) x 19" (W) x 4" (D) 29" (H) x 42" (W) x 4" (D) ONLY $99.99 Amplified Digital Outdoor Antenna MCM Part # 30-2230 #30-2066 MCM Part # 30-2250 #30-2071 Multi-Directional HDTV UHF Antennas Multi-directional antennas are designed to work in locations where the transmitters for digital stations are spread apart. These popular HD antennas utilize a bowtie design that provides a strong gain across the entire UHF spectrum (channels 14~69). They function incredibly well in areas where flexible aiming is required and feature a weatherproof construction that resists extreme wind loading. •360° reception pattern. •Amplifier gain: 10dB •Dimensions: 211⁄4" (W) x 101⁄4" (H) x 31⁄2" (D) •Mounting bracket, power injector, mounting hardware, and removable amplifier included •Mfr. #FDTVO ONLY $72.00 79.99 MCM Part # 30-2565 ONLY $119.00 Antenna Rotator •Heavy-duty motor handles large antennas •Extra strong machine cut gears won’t bind •Brake pads hold firm •Tested to 70 mph winds •Requires three–wire rotator wire (#24-3080) AM/FM HD Radio Antenna Kit •Professional quality AM/FM/HD radio antenna •Receive stations from up to 90 miles in all directions •All signals combined on a single RG-6 cable up to 200' (not included) •Includes surge protector and all required adapters and jumpers •Pole or wall mount •No preamplifiers required •4' omni-directional monopole requires no ground plane •Mfr. #AFHD-4 MCM Part # 33-10630 ONLY $165.99 HDTV Amplified Outdoor Antenna The Terk HDTVo is an innovative, compact, amplified outdoor antenna that features powerful high gain, and offers versatile installation flexibility. Its unique design incorporates a highly directional log periodic antenna array and a pair of curved elements that combine to capture and focus HDTV signals. Mount flush to the side of a building, or use the included mulit-mount mini-mast and base to install virtually anywhere. MCM Part # 30-2020 ONLY $119.99 MCM Part # 30-1020 ONLY $83.42 Rotator Cable Three conductor cable for use with many popular antenna rotators. Outer jacket 0.162" black PVC with 0.020" wall. Three 20AWG conductors color coded black, white and red. MCM Part # 24-3080 24-3085 24-3090 Length 100' 500' 1000' www.MCMelectronics.com /1-800-543-4330 ONLY $19.99 79.99 164.00 245 1 Audio/Video - Distribution #33-10605 SMA/SMB to “F” Adapters Satellite Radio RG-6 Extension Kit Dual Mode Satellite Radio Antenna •High-quality future proof home antenna for simultaneous reception of both XM and Sirius Radio •70 beam-width for easy alignment and mounting Drives up to 200' of RG-6 cable (not included) •Azimuth and elevation adjustments for optimum aiming •Two-stage high-quality filtering for rejection of out-of-band interference •High- quality aluminum mount •Includes wall or pole mount brackets •Mounts to any horizontal or vertical surface or pole up to 2'' diameter. MCM Part # 33-10645 This antenna extension cable is designed to work with any satellite radio antenna (purchsed separately) to extend the cable length 100' (lengths up to 300' can be achieved by cascading three cable kits). Kit includes: •SMB to “F” adapter •High-gain amplifier •100' premium RG-6 cable with “F” connectors •3' female to SMB-plug adapter cable •Two coax seals •Mfr. #PRO-100 MCM Part # 33-10615 MCM Part # 33-10620 •Operates up to four or eight satellite radios from a single antenna with this amplified splitter •Includes all adapters and accessories •Uses standard RG-6 cable (not included) •Maintains proper RF link budget for the radio •Splitter loss at 2.35GHz has been compensated by an internal low-noise amplifier powered by DC voltage supplied by radios •Splitter has 8dB of gain •Adapters used to convert XM or Sirius SMA and SMB connections into an “F” connection to mate with RG-6 cables •Four-way kit •Mfr. #SR-4 MCM Part # 33-10675 ONLY $102.99 Description ONLY 3' SMB-plug to $19.04 “F” female adapter cable SMA male to “F” female adapter 24.19 SMB male jack to “F” male adapter 16.98 Wide Band Four-Way Passive Splitter •Designed for all AM/FM, HD radio, broadcast TV, cable TV, satellite radio, and satellite TV signals •Passes signals from 500KHz to 2.4GHz •Insertion loss: 12dB •Use in conjunction with #33-10695 for lossless splits •Four-way splitter •Mfr. #MBS-4 MCM Part # 33-10690 •Kit to permit the use of standard RG-6 cable with satellite radio antennas •When used with the included amplifier, this kit can extend the antenna cable up to an additional 125' •Add the flexibility of RG-6 cable Kit includes: •SMB to “F” adapter (to mate with antenna cable) •High-gain amplifier •“F” to SMB adapter cable (to mate with radio) •Mfr. #EXTANT-01 MCM Part # 33-10600 ONLY $49.94 Weatherproof High #27-5825 Performance “F” Connectors #27-5830 Designed for quick and easy installation with any compression tool, Ridgeloc360 connectors feature patented compression ridges locking ensuring a permanent weather tight seal. Ideal for CATV and broadband installations these connectors have passed stringent moisture migration testing to SCTE standards. #27-5825 fits all RG-6 cables including dual, Tri, and quad shield and is DirecTV approved. Sold individually. ONLY $155.39 Sirius Ready MCM Part # 33-10605 33-10650 33-10655 Satellite Radio RG-6 Cable Extender Kit Amplifier Satellite Radio Splitter Kit •Receives XM or Sirius satellite radio services •Ideal for commercial, high-end home and multi-dwelling unit installations •Optimized for interference/multipath rejection and high gain reception of satellite radio signals •Antenna can drive up to 200' of RG-6 cable (not included) •Mounts to any horizontal or vertical surface or to a 13⁄4" diameter pole •High gain 12dBi antenna (5dB more than standard antennas) Includes: •Built-in two-stage ultra high low noise amplifier •Wall and pole brackets and accessories •3' “F” female to SMB plug adapter cable to mate with radio •Mfr. #PRO-500 #33-10655 ONLY $73.12 ONLY $87.54 Professional High Gain Satellite Radio System for XM and Sirius #33-10650 •Adapters used to convert XM or Sirius SMA and SMB connections into an “F” connection to mate with RG-6 cables •Sold individually ONLY $83.42 MCM Part # Mfr. # Cable Type ONLY 27-5825 PV6UE-05 RG-6 $0.69 universal (DirecTV approved) 27-5830 PV59-PV RG-59 0.69 Antenna Mounting Hardware Masts XM/Sirius Radio Ready Pro Pack High Gain Line Amplifier •Everything needed to add Sirius to any “Sirius Ready” receiver using up to 200' RG-6 cable Kit includes: •Pro-500 outdoor antenna •“F” to SMB 3' adapter cable •Sirius SC-H1 tuner or XM CMP2000 tuner and dock •Mfr. #SRR-5 •For use in satellite radio distribution networks to overcome loss in cables and splitters •Gain: 16dB @ 4.5VDC •Current consumption: Typically 10mA @ 4.5VDC •Frequency range: 2320~2345MHz •Noise figure: 4dB max •Mfr. #SBA-1 MCM Part # 33-10670 MCM Part # 33-10640 246 ONLY $228.66 ONLY $21.10 www.MCMelectronics.com /1-800-543-4330 16 and 18 gauge corrosion-protected mast ideal for television and communication antennas. 5' section swaged at one end on listed sections. 21⁄2' section is unswaged for use above rotator. MCM Part # 30-1080 30-935 30-2525 30-2530 30-2520 Length 2.5' 5" 2.5' 3" 5' Gauge 16Ga 16Ga 18Ga 18Ga 18Ga Follow us on: Swaged No Yes No Yes Yes & ONLY $6.99 11.99 4.49 5.39 8.99 Distribution - Audio/Video J-Pipe Mount NEW! •Versatile all-in-one mount that can be used with antennas or satellite dishes •Can be mounted on the roof, wall, chimney or any other flat surface •J-pipe is reversible from mounting foot for a variety of positioning options •Gray weatherproof coating •15⁄8" mast diameter MCM Part # 33-10914 33-10915 1 Overall Length 19" 38" ONLY $7.99 9.99 5' Tripod Roof Mount •Mounts TV antennas without guy wires •Self supporting •Extra heavy–duty with rotamast feature •Fits mast up to 13⁄4" •Six screw mast support Siding Mount Block •Clean and protective solution for mounting a satellite dish to vinyl siding •Prevents insect infestations and weathering •Comes in three styles to fit most aluminum and vinyl siding •White •Fits dutch lap siding •Dimensions: 12" x 8" MCM Part # 33-10562 Universal J-Mount •Outdoor antenna or satellite dish mounting •Pivoting foot mount offers the ideal solution for mounting nearly anywhere, including side of house, roof top, deck rail, or any other flat surface •Pipe is reversible from plate for more mounting angle options Includes:•Jshaped mounting pole •Mounting bracket •Expansion bolts MCM Part # 30-2110 30-2112 30-2360 Size 30" 20" 40" J-Pole Antenna / Dish Mount ONLY $21.99 15.99 19.99 NEW! Designed for mounting satellite dishes, J-Pole mounts are also popular for installation of small television antennas. The adjustable base and bent mast design allows installation on rooftops and eaves as well as walls. Available in 39" and 18" lengths MCM Part # 30-2510 30-2515 Size 39" 18" ONLY $15.89 11.99 100' Antenna Guy-Wire 100' segment of 6-20 galvanized steel high quality NEW! support cable to stabilize your antenna mast or installation system. Features: •100' coil •Guy wire support cable •6 Strands •20 Gauge strands MCM Part # 30-2550 ONLY $14.99 MCM Part # 30-930 ONLY $41.99 ONLY $17.03 3' Tripod for Outdoor Antennas Designed for mounting all types of outdoor antennas at the top peak NEW! of virtually any roof. These rugged tripods are the industry standard for installation of satellite dishes, small to medium CB and ham radio antennas, TV antennas and more. Their rugged construction allows use with mast pipes of up to 5' without need for guy wires. Features: •Pivoting base plate •18 gauge tubing •Includes 6 lag screws and 3 pitch pads •Made in the USA MCM Part # 30-2500 MCM Part # 33-10565 ONLY $33.98 ONLY $29.99 3' Tripods •Used for mounting TV antennas and satellite dishes permanently or for temporarily use •Fits masts up to 15⁄8" (included #33-10910 #33-10905 with portable unit) •Standard tripod uses six bolts to tighten down on mast, and can be anchored on all legs with three lag bolts each •Portable unit has integrated compass and bubble level, folds up for easy transportation, and secures to ground with anchor screw MCM Part # 33-10905 33-10910 Non-Penetrating Roof Mount •Perfect solution for commercial buildings and other flat roofs •For 18" and 24" dishes •Uses six 8" x 8" x 16" cinder blocks for stability •Powder coated for weather durability •Angle iron frame Description Standard Portable (1-9) $19.99 24.99 (10-24) $16.90 22.02 Satellite Dish Pipe Adapter •Adapt existing pipes and masts to work with satellite dish mounts •Heavy gauge steel •1.66'' outer diameter •Tightens with two bolts MCM Part # 33-10890 (1-9) $2.29 (10-24) $2.18 (25-49) $2.09 (50-up) $1.90 A (25-49) $16.11 21.15 C B A Pitch Pad Kit •Pitch pad and lag bolt kit •Pads reduce risk of water leakage •Use when mounting antennas on roof •Contains six lag bolts MCM Part # Discription For Lag-Bolts Pitch Pads ONLY 30-940 Tripods Six Three $3.18 30-2535 J-pole Four Two 2.29 Heavy–Duty Antenna Mounting Accessories Antenna Mounting Hardware Fig.MCM Part # A 30-1030 B 30-1035 C 30-1045 B C Description Qty. Guy wire clamp up to 11⁄2" mast 1 Turnbuckle - 7" open, 5" closed 3 Cable clamps 1⁄2" open 1⁄8" closed 3 ONLY $4.11 4.62 1.60 •Heavy–duty mount for masts up to 11⁄2" outer diameter •Made of all steel construction •Triple coat corrosion protection Fig. A B C MCM Part # 30-895 30-915 30-1160 Description Roof mount “Y” chimney mount Vent pipe mount www.MCMelectronics.com /1-800-543-4330 ONLY $7.99 25.49 10.99 247 1 Audio/Video - Distribution NEW! Dual Ground Block Perfect for all TV antenna, cable TV and satellite installations. This block provides feed-through for one or two cables, and a secure ground lug for attaching ground wire. Features: •Bandwidth to 3GHz •Extruded aluminum allow •Includes mounting screws MCM Part # 33-2202 #33-10880 #33-10882 High Frequency Ground Blocks #33-10920 Mast Mounts •A variety of mast mounts for finding the perfect location to mount an antenna or satellite dish •All mount fit up to a 11⁄2" mast •Eave mount adjusts from 46"~68" span MCM Part # 33-10880 33-10882 33-10920 Description 4" wall mount 8" wall mount U-bolt (1-9) $4.99 7.49 1.29 (10-24) $4.74 7.03 1.16 (25-49) $4.50 6.77 1.06 (50-up) $4.25 6.54 0.96 •Precision machined, high-quality security tool for connecting and disconnecting cables protected by a security sleeve •Long shaft fits all types of sleeves 4" Grounding Rod •Used to ground outdoor antenna and satellite sytems •Use with proper grounding wire and clamps for a complete ground •High-strength steel with copper top layer •11⁄32" thickness Description Security tool Security sleeve ONLY $7.58 0.62 Guy Wire MCM Part # (1-9) 33-10810 $2.99 MCM Part # 33-7705 33-7710 (10-24) $2.79 (25-49) $2.59 (50-up) $2.49 (1-9) $1.49 2.19 MCM Part # 30-1055 MCM Part # 33-10805 ONLY $13.38 (1-9) $1.49 (10-24) $1.34 (25-49) $1.30 Flat Coax Jumper Weather Boot •Thin, flexible coax coupler allows you to run cables through closed windows or other narrow gaps •Peeland-stick adhesive keeps jumper in place •Conforms to any angle •8" length •Flexible black boot slides over cable and connection to protect it from outdoor elements •UV resistant •2" length •100 per package MCM Part # 33-10935 MCM Part # 33-10950 (10-24) $0.90 (25-49) $0.82 (50-up) $0.75 (10-99) $1.29 1.99 (100-up) $1.20 1.89 NEW! A universal TV antenna mount which can be used to install a masted antenna to a roof or in an attic. This mount accepts pipes up to 1.5" in diameter while its low-profile makes it a great choice for attic-mounting. Features: •For 1.5" in diameter pipe •Outdoor or attic use •Low profile •90° pivot ONLY $4.49 U-Bolts Pipe Clamp Used to properly ground to copper water pipes. (50-up) $1.22 Connects antennas or mast to bracket. Use with mast pipe up to 11⁄4”. One per package. MCM Part # 30-1515 (1-9 pkgs.) $2.39 (10 pkgs.-up) $2.09 Drop Enclosures ONLY $8.99 These drop enclosures will house and protect components from the elements that corrode and shorten their lives. Drop A boxes produce a professional appearance for cable TV and satellite installations. The Omni II box offers simplicity of installation and professional appearance along with a generous B interior and the ability to seal the box for drop security. The Residential Control Box is designed to offer visual evidence of tampering and provides for easy maintenance. All boxes are UV resistant and come in a neutral gray color. Fig. A B 248 Description Single Dual MCM Part # 30-2560 •18 gauge, 6 strand heavy-duty guy wire •Vinyl coated to reduce effects of weather •Length: 100' (1-9) $0.99 High frequency ground blocks have extended frequency capacity to 2.4GHz making them perfect for satellite and digital applications. Nickel plated finish to resist effects of the weather. Universal Antenna Mount CATV Security Tool MCM Part # 33-0025 33-0030 ONLY $0.99 www.MCMelectronics.com /1-800-543-4330 MCM Part #Description (H) x (W) x (D) ONLY 33-6945 Omni II box 5.75 x 5.0 x 1.25 $3.11 33-6950 Residential 8.75 x 6.25 x 2.75 6.54 Control box Follow us on: & Distribution - Audio/Video 1 Cable Clips •Make any cable run look neat and secured in place by attaching coax or telecom cabling to walls and trim with high-impact plastic cable clips •Each clip includes a plated steel nail •100 clips per package MCM Part # Description (1-9) (10-24) (25-49) (50-up) 33-10850 Single, white $1.59 $1.44 $1.33 $1.20 33-10854 Single, black 1.59 1.44 1.33 1.20 Flex Cable Clips •Remarkably strong flexible clips grab cables without damaging them •Integrated Philips hex-head screws make installation quick and easy •100 clips per package Single Dual MCM Part # Description (1-9) (10-24) (25-49) (50-up) 33-10860 Single, white $2.99 $2.76 $2.65 $2.57 33-10862 Dual, white 2.99 2.76 2.65 2.57 33-10864 Single, black 2.99 2.76 2.65 2.57 33-10866 Dual, black 3.39 - - - Indoor Amplified Digital Antenna ClearStream™ Micron R Indoor Digital TV Antenna The Micron’s efficient, compact design offers excellent gain across the HDTV spectrum and is superior to most existing compact antennas for receiving UHF DTV signals. The Micron represent a new breakthrough in size and gain. Advanced design software allows these 10" x 11" antennas to be smaller and more powerful than ever before. This efficient design allows up to 98% of the available broadcast signal to actually reach the incoming antenna cable rather than being lost to impedance mismatches. Features: •May be table or wall mounted •Beamwidth : 70° •Assembled dimensions: 10" (L) x 11" (W) x 4.5" (D) MCM Range Part # Mfr. # Miles 30-2325 CSM1 25 30-2335 CSM1-R 35 30-2340 CSM-XG 35 Amplifier Reflector ONLY No No $47.99 No Yes 63.99 Yes Yes 79.99 MCM Part # 30-2245 Flat Panel HD Antennas Passive Flat Digital Antenna Slim profile and streamline shape complements any home theater center. Features: •360° reception technology •Receives digital TV broadcasts as well as FM radio signals •Mfr. #ANT1400R ONLY $21.99 Ultra-flat design with a rich high gloss black finish to complement today's LCD or plasma televisions, while providing terrific HD signal reception. Features: •Multi-directional design •Integrated coaxial cable •#30-2225 includes removable signal amplifier •Designed for indoor use MCM Part # 30-2220 30-2225 Mfr. # ANT1600R ANT1650R Passive/Active ONLY Passive $44.99 Active 64.99 • Receives local digital TV broadcasts and FM radio signals •360° reception patented technology eliminates constant adjustment •Enhances reception by amplifying weak signals with a built-in ultra low noise amplifier •Can be hung on a wall or lie flat •Coax cable included •Mfr. #ANT1450B This antenna’s efficient, compact design offers excellent gain and impedance matching across the entire HDTV channel spectrum. Multiple mounting configurations make this one antenna suitable in a variety of installations. Features: •Up to 30 miles range •Consistent gain throughout the UHF spectrum •Wall, table, and poll mounts included •Included reflector grid for outdoor performance •Dimensions 12" (H) x 12" (W) x 5" (D) •Mfr. #C1C MCM Part # 30-2300 ONLY $39.99 ONLY $31.99 Indoor Amplified HDTV Antenna (Refurbished) The FDTV1A from Terk is optimized for HDTV reception, and offers 360 degree reception. Removable high-gain Extremely Low Noise amplifier provides maximum flexibility and performance. Features: •Extremely Low Noise (ELN) Amplifier •Optimized for HDTV reception •360º reception pattern •Includes 3-way mounting bracket •Dimensions: 11.25" W x 11.73" H x 1.18" D MCM Part # 30-2450 Clearstream Convertible Indoor/ Outdoor Antenna ONLY $79.99 Flat Black HD Antenna MCM Part # 30-2170 Indoor Antennas MCM Part # 30-2215 The FDTV1A from Terk is optimized for HDTV reception. Removable amplifier provides maximum flexibility and performance. Features: •Multi-directional design offers 360° reception •Includes mounting bracket for hanging, standing, or lying flat •Amplifier gain: 10dB •Dimensions: 11¼" (W) x 11¾" (H) x 1¼" (D) ONLY $24.99 Flat Indoor TV Antenna VHF/ UHF HD Low Profile Amplified HDTV Antenna The FDTV2 from Terk is optimized for HDTV reception, with UHF and VHF reception capability, and includes a 3-way mounting bracket for maximum flexibility in placement (hanging, standing or lying flat). Features: •Removable amplifier with 10dB gain •360º reception pattern •Operating Bandwidth: VHF: 174~216MHz, UHF: 470~698MHz •Dimensions: 9" (W) x 9¾" (H) x 2½" (D) The Channel Master FLATenna is an indoor HD antenna designed to be aesthetically pleasing while providing excellent performance. Pick up high band VHF and UHF HD programming with this sleek and innovative new antenna from Channel Master. Features: •Ideal for metropolitan and suburban areas •Sleek design with the latest in reception technology •Vertical or Horizontal mounting options •Receives HD and digital stations •Perfect for computers with a TV tuner •Mfr. #CM-4045HD MCM Part # 30-2240 MCM Part # 30-2610 ONLY $69.99 www.MCMelectronics.com /1-800-543-4330 ONLY $17.99 249 1 Audio/Video - Distribution NEW! Slim Indoor Antenna Flat Indoor TV Antenna VHF/ UHF HD The Channel Master MODERNtenna CM4046HD Metro Series amplified indoor TV antenna is designed to be aesthetically pleasing while providing excellent performance. This unique sleek panel antenna is designed to pick up Hi VHF and UHF HD channels. Enjoy Free HD programming with this sleek and innovative new antenna from Channel Master. Features: •Ideal for metropolitan and suburban areas •Sleek design with the latest in reception technology •Receives from 174 to 216 MHz and 470 to 700 MHz •6' coaxial cable jumper included •Vertical or Horizontal mounting options •Mfr. #CM-4046HD MCM Part # 30-2615 ONLY $22.49 Indoor Outdoor Antenna Smartenna A high performance HDTV antenna designed for indoor or outdoor use up NEW! to 35 miles from your local TV transmitter. The CM-3000HD has been engineered to provided improved performance while reducing the size and eliminating the need for amplification in most installations. In addition to enhanced performance and reliability, the CM-3000HD was designed with the consumer in mind with an aesthetically pleasing design, with both a simple table top stand for indoors and a very versatile mounting bracket for easy outdoor mounting. Features: •35 mile digital and HD reception range •Frequency range: 174-216 MHz, 470-700 MHz •Gain: 5-8 dB •Antenna size (L x W x H): 13.38 x 11.25 x 1.5" •Indoor and outdoor ready •Mfr. #CM-3000HD MCM Part # 30-2625 ONLY $49.99 NEW! Flat Indoor TV Antenna The Channel Master CLEARtenna CM4050HD Metro Series amplified indoor TV antenna is designed to be aesthetically pleasing while providing excellent performance. This unique horizontal panel antenna is designed to pick up Hi VHF and UHF HD channels. Enjoy Free HD programming with this table top and clamp on optional innovative new antenna from Channel Master. Features: •Table top stand or clamp mount •Receives channels from 174 to 216 MHz and 470 to 700 MHz •Perfect for computers with TV tuners •6' coaxial cable jumper included •Sleek design with the latest in reception technology •Mfr. #CM-4050HD MCM Part # 30-2620 250 ONLY $26.99 •Slim antenna sets on or near your TV with a stable flip-out stand •Efficient, directional design with ultra-low noise amplifier maximizes digital reception •20dB gain •Noise (max): <4 dB Includes: •Antenna •6' coax cable •9VDC power adapter MCM Part # 30-2210 HDTV Indoor Antenna ONLY $19.99 The Terk HDTVi indoor HDTV directional antenna is optimized for HDTV reception. Its UHF and VHF elements are uniquely designed for reception of all available HDTV off-air broadcasts (channel 2~69). Highly directional UHF elements reduce signal interference and improve average return loss for better reception and superior performance. MCM Part # 30-2000 ONLY $39.99 Classic Indoor TV Antenna VHF/UHF HD The Channel Master CLASSICtenna amplified indoor TV antenna is designed to be aesthetically NEW! pleasing while providing excellent mid-range performance. The CLASSICtenna will receiving UHF and VHF HD signals from inside your home. Features: •Reception Range: 174-216 MHz, 470-700 MHz •Built in amplifier to boost TV signals •Telescoping VHF dipoles tilt and rotate •UHF loop tilts and rotates •Designed for reception of HD digital TV signals •Mfr. #CM-4030HD MCM Part # 30-2605 Indoor/Outdoor HD Television Antenna ONLY $17.99 ONLY $39.99 Basic Slim Antenna •Receives HD and DTV signals •Super slim design can be laid flat or hung horizontally on wall, even behind your television •Includes coax cable •Mfr. #ANT1000 MCM Part # 30-2165 •An amplified UHF/VHF antenna that will receive all FM, DTV, and HDTV signals •Adjustable amplifier for better control on reception gain •“F” type input for connecting external antenna, VCR, cable, or other source, or used stand-alone •Great for areas where an outdoor antenna is required for some stations, but nearby stations that are too strong require an indoor antenna •Frequency range: 40~860MHz •Max noise: 6dB •Max amplification: 28dB •Power source: 120VAC or optional 12VDC MCM Part # 30-2160 ONLY $11.99 NEW! State–of–the–art antenna is designed to provide outstanding high definition television reception without the unsightly antenna appearance. It is also excellent for FM radio reception. This unit may be pole or wall mounted, and includes a shelf bracket for indoor use. Features: •Internal 40dB signal amplifier •Remotely located power inserter •Fully weatherproof housing Specifications: •Frequency range: 87.5~230MHz and 470~862MHz •Power requirements: 12VDC, 50mA, AC adapter included •Impedance: 75ohm, female “F” connector •Dimensions (excluding base): 21.5" (H) x 10.5" (W) x 4.5" (D) MCM Part # 30-2455 UHF/VHF/HDTV Indoor Antenna ONLY $9.99 www.MCMelectronics.com /1-800-543-4330 HDTV Indoor Amplified Antenna Ideally suited for indoor HDTV (UHF) off-air reception, this antenna features a low-profile boom design, rotational elements for improved directional gain, and a 7~13dB adjustable gain control (power adapter included). MCM Part # 30-2100 ONLY $19.99 FM Dipole Antennas These high-quality FM dipole antennas can be used for many newer FM tuners and receivers. Available in three configurations: 300ohm spade terminals, 75ohm male “F” connector and 75ohm female PAL connector. These antennas are constructed from high-quality 300ohm twin–lead and perform significantly better than the OEM supplied straight wire or a split two conductor antennas providing higher-quality FM reception. MCM Part # 30-1530 30-1535 30-110 Description Male “F” connector Female PAL connector Spade terminals Follow us on: (1-9) $2.69 2.59 1.99 (10-up) $2.39 2.39 1.79 & 1 Distribution - Audio/Video Satellite Accessories 6 x 8 Multi-Switch •Six satellite inputs: four inputs from 101°/110°/119° and 99°/103°; two flex port inputs from 72.5° and 95° for international and local programming •Passive unit powered by connected satellite receivers •Wide band frequencies: 250~750MHz, 950~1450MHz, and 1650~2150MHz Basic UHF/VHF Antenna •Simple classic design with adjustable 36'' dipoles and loop •Built-in 5' coaxial cable •Receives UHF, VHF, HDTV/DTV, and FM signals •Mfr. #ANT111 MCM Part # 30-2190 ONLY $9.99 AM Advantage The AM Advantage antenna is a passive, fully adjustable indoor AM antenna designed for extended range capability. The antenna is intended to receive AM frequencies 530KHz~1600KHz for local and distant AM reception. The antenna features Pin–Dot™ Pre Tuning system which allow the user to adjust the antenna and match it to the specific frequency. Mfr. #ADVANTAGE. MCM Part # 30-1395 ONLY $46.99 AM/FM Tower (1-9) $23.99 •Dish kit includes mounting brackets, arm, mast, and Slimline reflector •Use dish kit with any of the LNBF options •All LNBF units receive orbital 99°/101°/103° for all DirecTV® standard programming •5-LNBF units additionally receive 110°/119° for local HD programming in some areas •SWM options for running single wire from the dish to SWM compatible multi-switches and splitters MCM Part # 33-10990 33-10992 33-10994 33-10996 33-10998 Description Slimline dish kit with mounts 3-LNBF, 4 outputs 3-LNBF, 1 output (SWM) 5-LNBF, 4 outputs 5-LNBF, 1 output (SWM) ONLY $72.09 41.19 92.69 61.79 102.99 ONLY $72.09 HDTV Compatible 5 x 8 Multi-Switch Expand and distribute your DIRECTV satellite signal from any phase II or phase III, 18" x 24" antennas, to up to eight rooms. Also capable of combining off-air or cable TV with satellite signals. Ideal for dual tuner DVRs. Features: •Four satellite inputs and one terrestrial TV input for up to eight satellite receivers •Built-in amplifier to overcome splitter loss •Two dual LNB selectable by 13/18VDC or 22KHz tone •Matrix routes between any inputs to any outputs •Rugged, weatherproof outdoor housing •Bandwidth: 5MHz~2150MHz •Power: 24VAC power supply included. MCM Part # 33-10250 ONLY $134.93 SWM Compatible Splitters •High-frequency RF splitters designed for use with splitting SWM satellite signals •One port DC pass •DIRECTV® SWM approved Positioned vertically, the tower receives signals from all directions with equal strength. Used horizontally, it becomes highly directional to pull in weaker and more distant stations. It also distinguishes between signal reflections and the main signal to eliminate overload and multipath difficulties. Specifications: FM stereo section: •Amplifier gain: Variable 0dB~25dB •Impedance: 75ohm adaptable to 300ohm input with included matching transformer •FM operating band: 88~108MHz AM stereo section: •AM operating band: 500~1700KHz •AM gain: 15dB •Range: 360° 17" (H) x 31⁄4" (W) MCM Part # 30-1110 MCM Part # 33-11007 Slimline Dish and LNBF (10-up) $21.59 MCM Part # 33-11010 33-11012 33-11014 Description 2-way 4-way 8-way ONLY $6.17 9.26 16.47 5X8 Multiswitch An eight output multiswitch with four satellite inputs and one terrestrial TV input. Features: •Inputs 13V/0kHz; 18V/0kHz; 13V w/22kHz tone output; 18V w/22kHz tone output •Satellite frequency response 950 to 2150 MHz •Off Air frequency response 54 – 806 MHz Single Wire Multi-Switch •Combine up to six LNB inputs (flex ports 72.5°/95°, 5-LNB 99°/101°, 103°/110°/119°) for a simpler, single wire installation into the home •Two SWM outputs can be split with SWM compliant high-frequency splitters for up to eight receivers or four DVRs •DIRECTV® compatible DVRs receive both needed signals from a single connection •Three legacy outlets for older equipment •Off-air antenna diplexer included •Power inserter required, sold separately MCM Part # 33-11000 33-11005 Description Single wire multi-switch 28V power inserter ONLY $184.37 20.59 MCM Part # 33-12600 ONLY $69.99 DirecTV Approved Indoor/Outdoor Switch •Satellite Input Frequency 950 to 1450 MHz •Insertion Loss/ Gain: -2 to + 5 dB •VHF / UHF / Cable / ATSC Input: 54 to 806 MHz •Body (W x D x H) 3.5”x3.0”x0.6” MCM Part # 33-12620 www.MCMelectronics.com /1-800-543-4330 ONLY $9.95 251 1 Audio/Video - Distribution Suunto Tandem Inclinometer/Compass The Suunto Tandem is two precision satellite tools in one. Slope/height (inclinometer) measurements are easily done through the sight to alert you to possible obstructions. Accurate satellite bearings can be found with the liquid filled precision compass. Mfr. #PVCOMAF. MCM Part # 33-7420 B-Band Converter ONLY $244.61 VHF/UHF/Satellite Diplexer-Mixer The TSDM-2150 is a compact television antenna satellite diplexer/combiner used in applications that require satellite I.F. distribution from 950~2150MHz. The TSDM-2150 uses a rugged case that allows for outdoor use. Specifications: •Frequency range: Satellite: 950~2150MHz, television antenna: 40~860MHz •Connectors: “F” type •EMI performance: >80dB MCM Part # 33-2710 (1-9) $5.40 (10-49) $5.14 (50-up) $4.82 DirecTV B Band Converter allows the HR20 and H20 high-definition receivers to receive all of the currently offered HD channels. The HR20 requires two (one per tuner), and the H20 requires one. MCM Part # 33-10999 ONLY $20.59 MCM Part # 33-2720 (1-9) $12.35 (10-up) $11.15 NEW! •Versatile all-in-one mount that can be used with antennas or satellite dishes •Can be mounted on the roof, wall, chimney or any other flat surface •J-pipe is reversible from mounting foot for a variety of positioning options •Gray weatherproof coating •15⁄8" mast diameter MCM Part # 33-10914 33-10915 Overall Length 19" 38" ONLY $7.99 $9.99 500' 14AWG Copper Ground Wire Premium grade 14AWG THHN solid copper core ground wire with heavy duty green nylon jacket. Gasoline oil and sunlight resistant. Meets UL 83 and NEMA WC70/ICEA S-95-658. Use in conjunction with other grounding supplies to protect against lightning strikes and power surges (1-9) $1.59 (10-24) $1.49 (25-49) $1.29 (50-up) $1.19 In-Line Amplifier •In-line amplifier for satellite cable runs greater than 100' •20dB max slope gain •For 900~2150MHz MCM Part # 33-10970 252 (1-9) $3.49 (10-24) $3.15 (25-49) $2.79 (50-up) $2.59 Strand 16 16 16 7 7 7 7 ONLY $224.00 419.00 499.00 299.00 565.00 469.00 679.00 Commercial grade, riser rated speaker wire features ultra flexible, high-conductivity ETP bare copper conductors with PVC insulation. Suitable for sound/ audio, intercom/PA systems and security systems. Gray PVC jacket includes rip cord and sequential footage every 2'. •Black and red color for two conductor wire •Black, red, white and green for four conductor wire •UL1666 and CMR/CL3R in-wall rated. MCM Belden Part # Conductors Strand Series 18AWG/pull box 24-9980 2 7 x 26 5300 24-9985 2 7 x 26 5300 16AWG/pull box 24-9990 2 19 x 29 5200 24-9995 2 19 x 29 5200 14AWG/spool 24-10000 2 19 x 29 5100 24-10005 2 19 x 29 5100 16AWG/pull box 24-10010 4 19 x 29 5202 24-10015 4 19 x 29 5202 Length ONLY 500' 1000' $79.99 164.00 500' 1000' 124.99 244.00 500' 1000' 214.00 409.00 500' 1000' 229.00 429.00 In-Wall Speaker Wire Premium Inwall Speaker Wire Features: •OFC bare copper conductors with very flexible tube-style PVC extruded jacket •105 strand 14awg and 65 strand 16awg construction ideal for whole-house and home theater installation •UL CMR/CL2R rated •Individually insulated, color-coded conductors in a common PVC jacket •Sequential foot markings •500' pull box put-up MCM Part # 24-14130 24-14131 24-14132 24-14133 24-14134 CL3 Rated In-Wall Speaker Wire ONLY $109.00 •Combines off-air signals with a satellite drop •Power passive one port •40~860MHz/ 950~2250MHz •Includes grounding screw MCM Part # 33-10975 Conductor/AWG 2C/18 4C/18 6C/18 2C/16 4C/16 2C/14 4C/14 J-Pipe Mount MCM Part # 24-14820 Diplexer Features: •Suitable for indoor/ outdoor direct burial applications •Stranded OFC conductors •Color coded black and red conductors Specifications: •Conductor insulation: PVC •Shield: overall 100% aluminum poly foil with drain •Jacket: Black PVC •Nominal impedance: 46ohms •Put-up: 1000' spools MCM Part # 24-14150 24-14151 24-14152 24-14153 24-14154 24-14155 24-14156 In-Line 950~2150MHz Amplifier Features: Die-cast housing, low noise: 4dB, high gain: 20dB, passes DC through for powering LNBs, sloped gain for long cable runs, voltage supplied by the satellite receiver Specifications: •Noise figure: 4dB •Gain: 950MHz: 15dB, 1450MHz: 18dB, 1750MHz: 20dB, 2150MHz: 21dB •Maximum output: 30dBmV (12 channels) •DC voltage: 15~18VDC (negative ground) •Connectors: “F” type Burial Speaker Wire Conductor/AWG 2C/16 4C/16 2C/14 4C/14 2C/12 Strand 65 65 105 105 65 ONLY $92.00 199.00 164.00 284.00 234.00 www.MCMelectronics.com /1-800-543-4330 High quality two or four conductor wire for various audio applications. High flexibility allows for ease of installation through walls and around obstacles. Ideal for in-wall speakers and intercom systems. UL approved for in-wall use. Individual conductors in a common jacket for ease of installation. Color coded for quick identification. MCM Part # Two Conductor 24-1655 24-1660 Four Conductor 24-1675 24-1690 Gauge Length 16 16 100' 500' 26.99 109.00 14 16 100' 500' 72.99 199.00 Follow us on: ONLY &
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement