Bake Max BMPM007 Operation Manual

Add to My manuals
11 Pages

advertisement

Bake Max BMPM007 Operation Manual | Manualzz

BMPM007

Operation Manual

7 Quart Planetary mixer

Our 7 liter mixer has a high 650 Watts power to allow mixing stiffer dough's and larger batches.

All metal body and counter-top style is designed professionally.

Its shafts are mounted in ball bearing and 100% steel gears drive.

Electronic 5-speed control helps you to enjoy non-stop shifting speed.

Planetary mixing action and digital timer ensures perfect results. Simple hand lift is good for changing bowl and attachments. When overloading, power off automatically to protect motor and electrical.

Safety guard is ONLY FOR BMPM-007

Smoothly rotate open with a micro switch to shut off power immediately to protect operator.

1-1 SAFETY PRECAUTIONS

When using this machine, always make sure the following conditions or operations are in effect.

Failure to this may cause accident or injury.

Keep hand & clothing away from bowl and attachments when in operation.

Keep rigid objects away from bowl and attachments when in operation.

To protect against risk of electrical shock, do not immerse mixer in water or other liquid.

Use the machine only with the electrical service specified on its nameplate.

Disconnect the machine from its power source before carrying out any maintenance.

Do not disable or remove the safety mechanisms included with the machine.

Do not leave the machine in operation unattended.

Observe maintenance and safety inspection schedules.

Maximum bread dough capacity 1500 gram on basis of 60 percent water.

1-2 SPECIFICATIONS

Motor:

Electrical:

650Watts powerful, ball bearing, ventilated within mixer enclosure.

100-120V, single phase or 208-240V, single phase

Switch & Timer: All in one digital control panel

Cord and Plug: 6 feet flexible cord and plug (for 110 V model only), respectively consist of 3 wires which one wire is connected for grounding, other wires are connected to power supply.

Transmission: The gears are constantly meshed in a special lubricant assuring long life; transmission gears are of heat-treated alloy steel, High accurate construction. All bearings are ball bearings.

Speeds: The mixer has five positive speeds as 100 RPM -500 RPM

Safety Guard: Safety guard is ONLY FOR BMPM-007. Smoothly rotate open with a micro switch to shut off power immediately to protect operator.

Dimension: 340 x 460 x 520 mm

(13.4" x 18.1" x 20.5") L x W x H

Net Weight: 18 Kg (39.6 lb.)

Standard:

Attachment:

Flat beater:

Whipping ball:

Stainless steel bowl: 1pc

Mixing hook: 1 pc

1 pc

1 pc

2. INSTALLATION

BEFORE INSTALL YOUR MIXER, CHECK TO BE SURE THAT YOUR

ELECTRICAL SERVICE SPECIFICATIONS MATCH THOSE OF YOUR

MIXER AS PRINTED ON THE MIXER'S NAMEPLATE.

2-1 LOCATION

Place the mixer in its operating location. Bench should be placed on a sturdy level surface. There should be adequate space around the mixer for the user to operate the control and install and remove bowls.

2-2 ELECTRICAL CONNECTIONS (Cord Connected Mixers)

WARNING:

THIS SUPPLY CORD ON THIS MACHINE IS PROVIDED WITH A

THREE-PRONG GROUNDING PLUG IT IS IMPERATIVE THAT THE

OUTLET TO WHICH THIS PLUG IS CONNECTED BE PROPERLY

GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER

GROUNDING TYPE, AN ELECTRICIAN SHOULD BE CONTACTED.

2-3 INSTALLATION DIAGRAM (MM)

3. OPERATION

Note: BEFORE being put into service. This cleaning procedure should also be followed for bowls and agitators before whipping egg whites with or whole eggs.

3-1 CONTROLS

All models are furnished with a digital Timer and electronic 5-speed

Timer:

Digital set by 1-30 minutes or non-timer service.

Speed:

Speed 1 - For slow beating, mashing and kneading yeast dough. Speed 2 - For mixing cookie and cake batters. Speed 3 - For beating, creaming and medium fast whipping. Speed 4 - For whipping heavy cream, egg whites and boiled frostings. Speed 5 - For whipping small amounts of heavy cream and egg whites.

3-2 HOW TO INSTALL AN AGITATOR

To install an agitator, the bowl must be installed and fully lowered. Place the agitator in the bowl, push it up on the agitator shaft, and turn it clockwise to seat the shaft pin in the slot of the agitator shank.

3-4 HOW TO INSTALL A BOWL

The bowl must be installed before the agitator. To install the bowl, fully lower the bowl support.

Position the bowl so the alignment bracket on the back of the bowl is in the bowl retainer and the locating pins on the front of the bowl support fit in the holes on the sides of the bowl.

3-5 ATTACHMENT USE GUIDE

DOUGH ARM:

It is frequently used for heavy bread dough, and preferable to be use at 1 speed

BEATER:

It is commonly used for thin batters, cake and mashing potatoes, like stuffing and preferable to be used at 2-3 speed.

WHIP:

It is best for whipping cream and beating eggs and preferable to be used at 4-5 speed.

4. MIXING CAPACITY:

PRODUCT

Egg Whites

Mashed Potatoes

Mayonnaise (Qts. Oil)

Meringue (Qts. Water)

Waffle/Pan cake Batter

Whipped Cream

Sheet Cake Batter

Layer Cake

Pound Cake

Whip

Beater

Beater

Beater

Sugar Cookie

Sponge Cake

Beater

Whip

Dough, pie Beater

Bread or Roll Dough Hook

(Light/ Medium, 60% water) 1 speed

TOOL 7 LITER BOWL

Whip 700 g

Beater

Beater

1500 g

3 liter

Whip

Beater

1 liter

2 liter

3 liter

2000 g

2500 g.

2500 g

2500 g

1000 g

1500 g

Water Flour

500 g. 800 g

WARNING:

Ensure your recipe meets mixers capacity.

Ensure water is 70 Degrees Fahrenheit or reduce capacity.

Ensure flour is at room temperature.

Ensure mixer is turned off when changing gears.

FAILURE TO COMPLY VOIDS ALL WARRANTY.

5. MAINTENANCE

NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN

DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING.

Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a water hose or any fluid pressure.

The mixer should be thoroughly cleaned after using.

Bowls and agitators should be removed from the mixer and cleaned.

The transmission case and planetary gears are filled special grease that will last for several years.

When grease is needed for replacement, it should be ordered from our authorized service representative.

If the attachment strikes bowl, stop the mixer. The original seller will help you to make adjustment.

If your mixer should malfunction or fail to operate, check the following.

Is the mixer plugged in?

Is the fuse in the circuit to the mixer in working order? If you have a circuit breaker box, be sure the circuit is closed.

If the problem is not due to one of the above items, please contact your original seller.

advertisement

Related manuals

Download PDF

advertisement