MD14F52
Introduction
2
DIGITAL VIDEO
COMBINATION FLAT COLOR
TELEVISION AND DVD
VIDEO PLAYER
Connections
Basic setup
TV operation
MD14F52
MD20F52
Basic playback
Advanced playback
OWNER’S MANUAL
Function setup
Others
Illustration of MD20F52
©2006 Toshiba Corporation
Before operating the unit, please read this manual thoroughly.
5W20101A [E] (Cover)
1
12/23/05, 14:32
13
18
20
28
31
41
47
Introduction
IMPORTANT SAFEGUARDS
IM
Dear Customer,
Child Safety
Thank you for purchasing this Toshiba TV. This manual will
help you use the many exciting features of your new TV.
Before operating the TV, please read this manual
completely, and keep it nearby for future reference.
It Makes A Difference
Where Your TV Stands
Safety Precautions
WARNING
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The Issue
If you are like most consumers, you have a TV in your
home. Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
CAUTION
trend, and larger TVs are popular purchases; however,
they are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or
inappropriately situated on dressers, bookcases, shelves,
desks, audio speakers, chests, or carts. As a result, TVs
may fall over, causing unnecessary injury.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Toshiba Cares!
The consumer electronics industry
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
is committed to making home
entertainment enjoyable and safe.
The Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
CAUTION: To reduce the risk of electric shock, do
not use the polarized plug with an extension
cord, receptacle, or other outlet unless the
blades can be inserted completely to prevent
blade exposure.
Tune Into Safety
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the NEC, which provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical. For additional antenna
grounding information, see items 25 and 26 on page 4.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE DISPLAY
If a fixed (non-moving) pattern or image remains on
the TV screen for extended periods of time, the
image c an become permanently ingrained in the
cathode ray tube(s) of the T V and c ause subtle but
permanent ghost image s. This type of damage is
NOT COVERED BY YOUR WARRANTY. (See item
33 on page 4 for det ails.)
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES ®
2
5W20101A [E] (P02-05)
One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your
TV (and other electronic components).
Use appropriate angle braces, straps, and anchors to
secure your furniture to the wall (but never screw
anything directly into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with
furniture and TVs.
Avoid placing any item on top of your TV (such as a
VCR, remote control, or toy) that a curious child may
reach for.
Remember that children can become excited while
watching a program and can potentially push or pull
a TV over.
Share our safety message about this hidden hazard
of the home with your family and friends. Thank you!
0303
2
12/23/05, 14:32
IMPORTANT SAFEGUARDS
Installation, Care and Service
Important Safety Instructions
Installation
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Follow these recommendations and precautions and heed
all warnings when installing your TV:
5) Do not use this apparatus near
water.
16) Never modify this equipment. Changes or
modifications may void: a) the warranty, and b) the
user’s authority to operate this equipment under the
rules of the Federal Communications Commission.
6) Clean only with a dry cloth.
17)
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus
(including amplifiers) that produce heat.
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
20) Never place items such as vases,
aquariums, or candles on top of the TV.
11) Only use attachments/accessories specified by
the manufacturer.
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom and sides. Never place
the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the apparatus
QUALIFIED
has been exposed to rain or moisture, does
SERVICE
TECHNICIAN
not operate normally, or has been dropped.
CAUTION: To reduce the risk of electric
shock, do not use the polarized plug
with an extension cord, receptacle, or other
outlet unless the blades can be inserted
completely to prevent blade exposure.
5W20101A [E] (P02-05)
3
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
18) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
9) Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third
Wide plug
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
15)
Introduction
1)
2)
3)
4)
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
23) Never overload wall outlets and
extension cords.
0303
3
12/23/05, 14:32
Introduction
IMPORTANT SAFEGUARDS
S
30) [This item applies to projection TVs only.] If the air
temperature rises suddenly (for example, when the TV
is first delivered), condensation may form on the
lenses. This can make the picture appear distorted or
the color appear faded. If this happens, turn off the TV
for 6 to 7 hours to allow the condensation to evaporate.
24) Always operate this equipment from
a 120V AC, 60 Hz power source only.
25) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see Section
810 of the National Electric Code).
31) For added protection of your TV from lightning and
power surges, always unplug the power cord and
disconnect the antenna from the TV if you leave the TV
unattended or unused for long periods of time.
Antenna lead-in wire
Ground clamp
Grounding conductors
(NEC Section 810-21)
Electric service equipment
Power service grounding
electrode system (NEC Art 250 Part H)
Ground clamps
26)
32) During normal use, the TV may make
occasional snapping or popping
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
Antenna discharge unit
(NEC Section 810-20)
33) Possible Adverse Effects on TV Picture Display: If
a fixed (non-moving) pattern or image remains on the
TV screen for extended periods of time, the image can
become permanently ingrained in the cathode ray
tube(s) of the TV and cause subtle but permanent
ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave the
TV on for extended periods of time while it
is displaying the following images or formats:
DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
• Use extreme care to make sure you are
never in a position where your body (or any item you
are in contact with, such as a ladder or screwdriver)
can accidentally touch overhead power lines. Never
locate the antenna near overhead power lines or other
electrical circuits.
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
• Fixed Images, including but not limited to PIP/POP
windows, closed captions, video game patterns, TV
station logos, stock tickers, and websites.
• Special Formats that do not use the entire screen,
including but not limited to widescreen or letterbox
format media viewed on a 4:3 aspect ratio display
(with gray or black bars at the top and bottom of the
screen); or 4:3 aspect ratio format media viewed on a
widescreen/16:9 aspect ratio display (with gray or
black bars on the left and right sides of the screen).
Care
For better performance and safer operation of your
TOSHIBA TV, follow these recommendations and
precautions:
Service
34)
27) Always sit approximately 10–25 feet away from the TV
and as directly in front of it as possible. The picture can
appear dull if you sit too far to the left or right of the
TV, or if sunlight or room lights reflect on the screen.
Turn the TV off to check for reflections on the screen,
and then remove the source of reflections while
viewing the TV.
5W20101A [E] (P02-05)
36) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the
TV. Improper disposal may result in a picture tube
implosion and possible personal injury.
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any
kind into the TV cabinet slots.
4
0303
4
QUALIFIED
SERVICE
TECHNICIAN
35) If you have the TV serviced:
• Ask the service technician to use only replacement
parts specified by the manufacturer.
• Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
29)
WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
12/23/05, 14:33
SAFETY PRECAUTION/ Power source
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Introduction
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the
FCC (Federal Communications Commission) Rules could void the user's authority to operate this
equipment.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ
THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.
Location of the required Marking
The rating sheet and the safety caution
are on the rear of the unit.
Illustration of MD20F52
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION
MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO
NOT STARE INTO BEAM.
CERTIFICATION: COMPLIES WITH
FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
WARNING: This product contains a laser beam. Do not attempt to stare at the beam through the DVD disc tray
or the ventilation openings. Staring directly at the beam may cause permanent damage to your
eyesight.
IMPORTANT RECYCLING INFORMATION
This product uses both Cathode Ray Tube (CRT) and other components that contain lead. In your
community there might be regulations that require you to dispose these materials properly under
environmental considerations. Please contact your local authorities, or the Electronic Industries
Alliance (http://www.eiae.org) for disposal or recycling information.
Power source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC
cord plug into a standard 120V 60Hz polarized AC outlet.
Notes:
• Never connect the AC line cord plug to other than the specified voltage (120V
60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not
attempt to file or cut the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to
function, simply unplug the unit from the AC outlet and plug it back in. The
unit should return to normal operation.
• If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds
before pressing the POWER button.
5
5W20101A [E] (P02-05)
5
12/23/05, 14:33
Introduction
Precautions
Notes on handling
3 When shipping the unit, the original shipping carton
and packing materials come in handy. For fully
protection, repack the unit as it was originally packed
at the factory.
3 Do not use volatile liquids, such as insect spray, near
the unit. Do not leave rubber or plastic products to
contact the unit for prolonged period. They will leave
marks on the finish.
3 The top and rear panels of the unit may become
warm after a long period of use. This is not a
malfunction.
3 When the unit is not in use, be sure to remove the
disc and turn off the power.
3 If you do not use the unit for a long period, the unit
may not function properly in the future. Turn on and
use the unit occasionally.
Notes on locating
3 Place the unit on a level surface. Do not use it on a
shaky or unstable surface such as a wobbling table or
inclined stand. The loaded disc may become
disaligned and damage the unit.
3 When you place this unit near a TV, radio, or VCR,
the playback picture may become poor and the sound
may be distorted. In this case, place the unit away
from the TV, radio, or VCR.
Notes on moisture condensation
Moisture condensation damages the unit. Please
read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the unit.
3 Moisture condensation occurs during the
following cases.
When you bring the unit directly from a cold place to
a warm place.
When you use the unit in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
In summer, when you use the unit in a hot and humid
place just after you move the unit from an air
conditioned room.
When you use the unit in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the unit.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
3 Do not use the unit when moisture condensation
may occur.
If you use the unit in such a situation, it may damage
discs and internal parts. Remove the disc, connect
the power cord of the unit to the wall outlet, turn on
the unit, and leave it for two or three hours. After two
or three hours, the unit will have warmed up and
evaporated any moisture. Keep the unit connected to
the wall outlet and moisture condensation will seldom
occur.
Wa
it!
Wall outlet
6
5W20101A [E] (P06-07)
6
12/23/05, 14:33
Notes on discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.
Introduction
On handling discs
DVD video disc
DVD video disc
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Playback side
Do not attach paper or tape to discs.
Video CD/Audio CD
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
The unauthorized recording, use, distribution, or
revision of copyrighted materials including, without
limitation, television programs, videotapes, and DVDs,
is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and criminal liability.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.
7
5W20101A [E] (P06-07)
7
12/23/05, 14:33
Introduction
Notes on discs (Continued)
About this owner’s manual
This owner’s manual explains the basic instructions of
this unit. Some DVD video discs are produced in a
manner that allows specific or limited operation during
playback. As such, the unit may not respond to all
operating command. This is not a defect in the unit.
Refer to instruction notes of discs.
“
” may appear on the TV screen during operation.
A“
” means that the operation is not permitted by the
unit or the disc.
For example, sometimes it is unable to stop the playback
of copyright message of the disc when the STOP (3)
button is pressed. Alternatively, the “
” may also
indicate that the feature is not available for the disc.
Playable discs
This unit can play the following discs.
Disc Mark Contents
12 cm
DVD
video
discs
This DVD supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD in the
same way as an audio CD.
• Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
Approx. 8 hours
(double sided disc)
Audio
+
Video
(moving
pictures)
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Video
CDs
Audio
CDs
On Video CDs
Maximum
playback time
Approx. 4 hours
(single sided disc)
Notes on region numbers
The region number of this unit is 1. If region numbers,
which stand for their playable area, are printed on your
DVD video disc and you do not find 1 or ALL , disc
playback will not be allowed by the player. (In this case,
the unit will display a message on-screen.)
Disc
Size
Audio
+
Video
(moving
DIGITAL VIDEO
pictures)
12 cm
Approx. 74 minutes
(single sided disc)
8 cm
Approx. 20 minutes
(single sided disc)
12 cm
Approx. 74 minutes
(single sided disc)
8 cm
Approx. 20 minutes
(single sided disc)
Audio
The following discs are also available.
DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA, Video CD, MP3/WMA
(MD20F52 only) or JPEG format
FUJICOLOR CD format
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM,
Photo CD, etc., or non standardized discs even if they
may be labeled as above.
• Some CD-R/RWs cannot be played back depending
on the recording conditions.
• This unit uses the NTSC color system, and cannot
play DVD video discs recorded in any other color
system (PAL, SECAM, etc.).
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture
of DVD and CD discs, Toshiba cannot guarantee that the
DVD player contained in this TV will play every feature of
every DVD bearing the DVD logo and/or every CD bearing
the CD logo. As one of the creators of DVD technology,
Toshiba DVD players are manufactured using the highest
standards of quality, and as a result, such incompatibilities
are rare. If you happen to experience any difficulty playing
a DVD or a CD on the DVD player contained in this TV,
please feel free to contact us via the method listed in the
“How to Obtain Warranty Service” section on page 53 .
is a trademark of DVD Format/Logo Licensing Corporation.
8
5W20101A [E] (P08-12)
8
12/23/05, 14:33
Contents
Advanced playback
IMPORTANT SAFEGUARDS ............................ 2
SAFETY PRECAUTION .................................... 5
Power source .................................................... 5
Precautions ....................................................... 6
Notes on discs ................................................... 7
Contents ............................................................ 9
Identification of controls .................................. 10
Zooming ......................................................... 31
Locating desired scene .................................. 31
Marking desired scenes ................................. 32
Repeat playback............................................. 33
A-B Repeat playback...................................... 33
Program playback .......................................... 34
Random playback........................................... 34
Changing angles ............................................ 35
Title selection ................................................. 35
DVD menu ...................................................... 35
Changing soundtrack language ..................... 36
Subtitles ......................................................... 36
Disc status ...................................................... 37
To turn off the PBC ........................................ 37
MP3/WMA CD (MD20F52 only)/JPEG CD
information ..................................................... 38
MP3/WMA CD playback (MD20F52 only) ...... 39
JPEG CD playback ........................................ 40
Connections
Antenna connections ....................................... 13
Cable TV connections ..................................... 14
Connecting to optional equipment ................... 15
Basic setup
Starting setup .................................................. 18
Setting the language ....................................... 19
Introduction
Introduction
TV operation
TV operation .................................................... 20
Closed captions ............................................... 22
To memorize channels .................................... 23
Setting the V-Chip ........................................... 24
Picture control adjustment ............................... 26
Adjusting the picture preference ..................... 26
Sound control adjustment (MD20F52 only) ..... 27
Stereo and Second Audio Program (SAP) ...... 27
Basic playback
Playing a disc .................................................. 28
Function setup
Customizing the function settings .................. 41
Temporary cancel the rating level
by DVD disc ................................................... 46
Others
Language code list ......................................... 47
Troubleshooting ............................................. 48
Reception disturbances .................................. 50
Specifications ................................................. 51
Limited warranty ............................................. 52
9
5W20101A [E] (P08-12)
9
12/23/05, 14:33
Introduction
Identification of controls
See the page in
for details.
Front
Illustration of MD20F52
POWER indicator 20
AUDIO (L/R)/VIDEO IN
jacks (LINE IN 2) 15
Disc tray 28
POWER button 28
STOP (
) button 28
PHONES jack 21
SKIP (
Remote sensor 12
OPEN/CLOSE ( ) button 28
/
) buttons 30
PLAY ( ) button 28
CHANNEL ( / ) buttons 21
VOLUME ( / ) buttons 20
Rear
Illustration of MD20F52
AUDIO (L/R)/VIDEO IN jacks (LINE IN 1) 15
COAXIAL DIGITAL AUDIO OUT jack 16
RF IN jack 13
AC power cord
*AUDIO (L/R)/VIDEO IN jacks are equipped only with MD20F52.
10
5W20101A [E] (P08-12)
10
12/23/05, 14:33
Introduction
Remote control
The instructions in this manual describe the function on the remote control. See the page in
OPEN/CLOSE button
29
TV/DVD button
28
Direct channel
Selection buttons (0-9)
Number buttons (0-9)
20
DISPLAY button 21
37
for details.
POWER button 18
SLEEP button 21
31
JUMP button 31
CH
/
buttons
21
VOL +/- buttons 20
SUBTITLE button
36
AUDIO SELECT button 27
INPUT button
ZOOM button
15
31
MUTE button 21
PLAY MODE button
33
36
DVD MENU button 35
ENTER button 18
Direction buttons (
/ / / )
19
MENU button
SETUP button
19
41
PLAY button
29
PAUSE button
29
STOP button 29
CH RTN button
21
30
CLOSED CAPTION button 22
button 30
SKIP
FF button 30
SKIP
button
REV button
30
TOP MENU button
ANGLE button
35
35
CANCEL button 18
SLOW
button 30
MARKER button 32
GAME button 15
REPEAT A-B button 33
RETURN button 41
*DVD MENU button
Use the DVD MENU button to
display the menu included on
many DVD video discs.
To operate a menu, follow the
instructions in “DVD menu.” 35
11
5W20101A [E] (P08-12)
11
12/23/05, 14:33
Introduction
Identification of controls (Continued)
Inserting batteries
1
Open the battery compartment cover in the direction of
the arrow.
2
Install two “R03/AAA” batteries (supplied), paying attention
to the polarity diagram in the
battery compartment.
3
Replace the compartment
cover.
Operation
• Aim the remote control at the remote sensor and press control buttons to operate.
• Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5
meters.
Illustration of MD20F52
Approx. 5 meters
Caution:
Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries
with new ones.
• When necessary to replace batteries in the remote control, always replace both batteries with new ones.
• Never mix battery types or use new and used batteries in combination.
• Always remove batteries from remote control if they are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from leaking into the battery compartment.
12
5W20101A [E] (P08-12)
12
12/23/05, 14:33
Connections
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If
you are using a cable TV service (CABLE), see page 14 for Cable TV connections.
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Antenna
jack
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
75 ohm coaxial cable
(not supplied)
Connections
Antenna
jack
300-75 ohm matching
transformer (supplied)
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Antenna
jack
300-75 ohm matching
transformer (supplied)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.
Combiner
(not supplied)
UHF 300 ohm
twin-lead wire
(not supplied)
VHF 300 ohm
twin-lead wire
(not supplied)
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
Antenna
jack
VHF 75 ohm
(not supplied)
Combiner
(not supplied)
UHF 300 ohm
twin-lead wire
(not supplied)
13
5W20101A [E] (P13-23)
13
12/23/05, 14:33
Connections
Cable TV connections
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box.
Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for
normal viewing requires the use of a descrambler device which is generally provided by the cable company.
For subscribers to basic cable TV service
Antenna
jack
For basic cable service not requiring a converter/descrambler
box, connect the Cable TV 75 ohm coaxial cable directly to the
Antenna jack on the back of the TV/DVD.
75 ohm
coaxial cable
For subscribers to scrambled cable TV service
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections
shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4)
and use the converter/descrambler box to select channels.
Incoming
75 ohm
Cable TV
75 ohm cable
to TV/DVD
Converter/
descrambler
Antenna
jack
For subscribers to unscrambled basic cable TV service with scrambled
premium channels
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the
cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune
your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/
descrambler box to tune scrambled channels.
Converter/
descrambler
Incoming
75 ohm
Cable TV
Splitter
A/B switch
A
75 ohm cable
to TV/DVD
B
14
5W20101A [E] (P13-23)
14
12/23/05, 14:33
Antenna
jack
INPUT
Connecting to optional equipment
You can enjoy VCR, camcorder or TV game with connection to external
input.
GAME
Using the audio/video inputs
Press INPUT repeatedly to select the desired mode.
TV Channel
LINE
TV Channel
LINE 1
(Back)
Connections
MD20F52
“LINE1”, “LINE2” or TV channel will display on the
screen for 4 seconds.
MD14F52
“LINE” or TV channel will display on the screen for 4
seconds.
LINE 2
(Front)
LINE
Note: This key will not operate in DVD mode.
To connect the TV/DVD to a VCR
Press INPUT to select the desired mode to use the TV as a monitor.
Operate your VCR as usual.
VCR
Front of TV/DVD (Illustration of MD20F52)
: Signal flow
VIDEO IN
MD20F52:
You can also connect the
optional equipment to
“LINE1” (Back).
AUDIO IN (R)
To Audio/Video OUT
AUDIO IN (L)
Audio/Video cable (not supplied)
To connect the TV/DVD to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Front of TV/DVD (Illustration of MD20F52)
: Signal flow
VIDEO IN
Camcorder
AUDIO IN (R)
To Audio/Video OUT
Audio/Video cable (not supplied)
AUDIO IN (L)
To connect the TV/DVD to a TV Game
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
1. Connect a TV Game to the TV/DVD.
2. Press GAME. The GAME mode screen appears.
• This TV/DVD has the GAME mode function (see page
21
).
Front of TV/DVD (Illustration of MD20F52)
: Signal flow
VIDEO IN
AUDIO IN (R)
To Audio/Video OUT
AUDIO IN (L)
Audio/Video cable (not supplied)
Notes:
• You can also change the TV screen to the external input by pressing the CH / buttons.
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional
information.
• The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or
criminal liability.
15
5W20101A [E] (P13-23)
15
12/23/05, 14:33
Connections
Connecting to optional equipment (Continued)
You can enjoy high quality dynamic sounds by connecting the
TV/DVD to optional audio equipment.
* This section uses the following reference mark.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the
Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will
obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as
well as from titles with the Dolby Surround mark.
Amplifier equipped with a
Dolby Digital decoder
• Use DVD video discs
encoded via the Dolby
Digital recording system.
Illustration of MD20F52
To COAXIAL
type digital
audio input
Manufactured under license from
Dolby Laboratories. “Dolby”, “Pro
Logic”, and the double-D symbol
are trademarks of Dolby Laboratories.
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right
and left front speakers, a center speaker, and one or two rear speakers).
3 With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.”
Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
3 With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
• This connection is only suitable for Video CDs and Audio CDs.
*
Amplifier equipped with
Dolby Surround Pro Logic
Illustration of MD20F52
To COAXIAL
type digital
audio input
* Connect one or two rear speakers. The output sound from the
rear speakers will be monaural
even if you connect two rear
speakers.
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.
Amplifier equipped with
a DTS decoder
• Use DVD video discs or
audio CDs encoded via the
DTS recording system.
Illustration of MD20F52
To COAXIAL
type digital
audio input
“DTS” and “DTS Digital Out”
are trademarks of Digital
Theater Systems, Inc.
75 Ω coaxial cable (not supplied)
16
5W20101A [E] (P13-23)
16
12/23/05, 14:33
Connecting to an amplifier equipped with an MPEG2 audio decoder
Connections
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an
MPEG2 audio decoder
Illustration of MD20F52
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
• Use DVD video discs
encoded via the Dolby
Digital recording system.
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
Amplifier equipped with a
Digital audio input
Illustration of MD20F52
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
Notes:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO
OUT jack of the TV/DVD.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
17
5W20101A [E] (P13-23)
17
12/23/05, 14:33
Basic setup
POWER
Starting setup
The STARTING SETUP function makes installing your TV/DVD easily. It leads
you the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
/
ENTER
CANCEL
Starting setup
1
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press
or
to select your desired
language, then press ENTER.
4
Now the “AUTO CH MEMORY” starts.
After the starting setup is completed, the TV
channel appears on the screen.
Note:
If you press CANCEL in the process of “AUTO CH
MEMORY”, you can do starting set up function again.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
<
2
/
Press
or
to select “TV” or “CABLE”, then
press ENTER.
CHANNEL PLAN
TV
CABLE
<
3
AUTO CH MEMORY
STOP : CANCEL
/ ENTER>
/
Note:
The starting setup function will work only when you press
POWER for the first time.
/ ENTER>
Press
or
to select “START”, then press
ENTER.
If you select “CANCEL” and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
AUTO SETUP
START
CANCEL
<
/
/ ENTER>
18
5W20101A [E] (P13-23)
18
12/23/05, 14:33
Setting the language
This TV/DVD can display the on screen language in English, Spanish or French.
Select the language you prefer first, then proceed with the other menu
options.
ENTER
/ / /
MENU
Setting the language
Press MENU, then press
option.
or
to select
Basic setup
1
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/MENU
2
Press
or
to select the desired language:
English (ENGLISH), Spanish (ESPAÑOL) or
French (FRANCAIS), then press ENTER.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/
3
/ ENTER/MENU
Press MENU repeatedly until the menu screen
is cleared.
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC
power cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu 41 .
19
5W20101A [E] (P13-23)
19
12/23/05, 14:34
TV operation
POWER
0–9
TV operation
VOL +/–
TV operation
1
4
To turn on the TV/DVD, press POWER.
The Power indicator will light.
Illustration of MD20F52
2
Adjust the volume level by pressing VOL + or –.
The volume level will be indicated on the
screen by green bars. As the volume level
increases, so do the number of bars. If the
volume decreases, the number of green bars
also decreases.
Press Direct channel selection buttons (0–9)
to select the channel.
TV mode direct channel selection
When the TV/CABLE selection is in the TV position, all
channels can be instantly selected by using two
buttons. (for example, to
select channel 2, press “0”,
CH 012
then “2”. If you press only “2”,
channel selection will be
delayed for a few seconds.)
For channels 10 and above,
press the 2 digits in order.
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
VOLUME
3
32
Set the TV/CABLE selection to the appropriate
position 23 .
TV
- VHF/UHF channels
CABLE - Cable TV channels
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.
TV
CABLE
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
Notes:
• If a channel with no broadcast is selected, the sound will automatically be muted.
• If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
20
5W20101A [E] (P13-23)
TO SELECT CABLE TV CHANNELS:
1-9:
Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press
“002”.
10-12:
Press “0”, then the remaining 2 digits.
Example, to select channel 12, press
“012”.
13-99:
Press the 2 digits in order. Example, to
select channel 36, press “36”.
100-125: Press the 3 digits in order. Example, to
select channel 120, press “120”.
20
12/23/05, 14:34
SLEEP
DISPLAY
VOL +/–
MUTE
CH /
CH RTN
GAME
■ SLEEP
To set the TV/DVD to turn off after a preset amount of
time, press SLEEP on the remote control. The clock
will count down 10 minutes for each press of SLEEP
(120, 110, ...10, 0). After the sleep time is programmed,
the display will appear briefly every ten minutes to
remind you that the sleep timer is operating. To confirm
the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel
the sleep timer, press SLEEP repeatedly until the
display turns to 0.
TV operation
■ CHANNEL UP/DOWN
Press and release CH
or . The channel automatically stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See page 23 “To
memorize channels”.
SLEEP
120
■ DISPLAY
Press DISPLAY to display the current informations on
the screen. Press DISPLAY again to clear the display.
• Channel number or external input mode
• Stereo or SAP(Second Audio Program) audio status
• Audio output status
STEREO SAP
CH 012
SEL. STEREO
■ CH RETURN
This button allows you to go back to the last channel
selected by pressing CH RTN. Press CH RTN again to
return to the last channel you were watching.
■ MUTE
Press MUTE to switch off the sound. The TV/DVD’s
sound will be silenced and “MUTE” will briefly appear on
the screen. The sound can be switched back on by
pressing this button again or one of VOL + /–.
■ GAME MODE
After connecting a TV Game to the unit, press GAME.
The TV screen changes to the Game mode.
• The Game mode screen is adjusted to the suitable
brightness for your eyes.
• Game timer function: After one hour, the Game timer
display will appear every 30 minutes for approx. 5
seconds showing how long the time has passed up
to 4 hours.
• If GAME is pressed during standby mode, the unit
turns on automatically and the Game mode screen
appears on the screen.
GAME
■ HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8”
mini plug into the PHONES jack on the front panel. If
you connect headphones, the sound from TV speakers
is muted.
MUTE
Illustration of MD20F52
21
5W20101A [E] (P13-23)
21
12/23/05, 14:34
TV operation
Closed captions
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned
television programs. Closed captioning will display text on the screen for
hearing impaired viewers or it will translate and display text in another
language.
CLOSED
CAPTION
Closed captions
Captions: This closed caption mode will display text on the screen in English or another language (depending on the
setting of the closed captions CH 1/2).
Generally, closed captions in English are transmitted on captions channel 1 and closed captions in other languages
are transmitted on captions channel 2.
Text: The text closed caption mode will usually fill the screen with a programming schedule or other information.
After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed.
If the captions signal is lost due to a commercial or a break in the signal, the captions will reappear when the signal is
received again. If the channels are changed, the captions will be delayed approximately 10 seconds. The captions will
appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen.
News programs will usually show three-line closed captions which scroll onto the screen.
Most other shows provide two or three lined captions placed near the character who is speaking so the viewer can
follow the dialogue. Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words that are sung usually appear enclosed by musical notes.
For television programs broadcasting with closed captions, look in your TV guide for the closed captions symbol (CC).
TO VIEW CLOSED CAPTIONS
Press CLOSED CAPTION to switch between normal TV and the two closed caption
modes (captions and full screen text). Closed captioning will display text on the screen
for hearing impaired viewers.
Notes:
• When selecting closed captions, the captioning will be delayed approximately 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the caption mode.
• Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning,
especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not
allow time for editing.
• When captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with closed
captions.
• Some cable systems and copy protection systems may interfere with the closed captioned signal.
• If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
NOTICE OF POSSIBLE ADVERSE EFFECTS ON TV PICTURE DISPLAY
Avoid displaying stationary images on your TV screen for extended periods of time. Fixed (non-moving) patterns or images
(including but not limited to PIP/POP windows, closed captions, video game patterns, TV station logos, stock tickers,
websites and special formats that do not use the entire screen) can become permanently ingrained in the cathode ray
tube(s) of the TV and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR
WARRANTY.
22
5W20101A [E] (P13-23)
22
12/23/05, 14:34
To memorize channels
0–9
This TV/DVD is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory, skipping over
unwanted channels. Before selecting channels, they must be programmed into
the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/
DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an
antenna, set the TV/CABLE selection to the TV position. When shipped from
the factory, this selection is in the CABLE position.
TV/CABLE selection
1
MENU
Automatic memory tuning
Press MENU in the TV mode, then press
to select
option.
or
Press
or
to select the “AUTO CH MEMORY”,
then press .
The TV will begin memorizing all the channels
available in your area.
CABLE
/ / / / MENU
2
Press
or
TV operation
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / /
to select “TV/CABLE”.
To ADD/DELETE channels
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
CABLE
1
/ / / / MENU
3
Press
or
Press
press
or
to select “ADD/DELETE”, then
.
to select “TV” or “CABLE”.
TV - VHF/UHF channels
CABLE - Cable TV channels
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
TV
2
Select the desired channel to be added or
deleted using Direct channel selection buttons
/ .
(0–9) or
3
Press
or
to select “ADD” or “DELETE”,
whichever function you want to perform.
/ / / / MENU
4
Press MENU repeatedly until the menu screen is
cleared.
Cable TV chart
The chart below is typical of many cable system channel
allocations.
ADD
0-9 /
CH 001
/
/
/
/ MENU
23
5W20101A [E] (P13-23)
23
12/23/05, 14:34
TV operation
Setting the V-Chip
0–9
An age limitation can be set to forbid children to watch programs according to
“TV RATING” and “MOVIE RATING” level set. To use the V-Chip function,
you must register a password.
ENTER
/ / /
CANCEL
MENU
Notes:
• If you forget the password, you cannot set the V-Chip.
• To avoid forgetting the password, write it down and keep in
the safe place.
To register password
1
Press MENU, then press
option.
To change password
or
to select
1
In the V-CHIP menu, press
or
to select
“CHANGE PASSWORD”, then press .
V-CHIP SET
NEW
PASSWORD
/
2
Press
or
/
/
OFF
V-CHIP
V-CHIP SET
CHANGE PASSWORD
:––––
/ MENU
/
to select “PASSWORD”.
2
/
/ MENU
Enter the new password using Number buttons
(0–9), then press ENTER.
V-CHIP SET
NEW
PASSWORD
CHANGE PASSWORD
:––––
NEW
PASSWORD
:––––
0–9/ENTER/CANCEL/MENU
0-9/ENTER/CANCEL/MENU
3
Enter the password (4 digits) using Number
buttons (0–9), then press ENTER.
• If you input a wrong number, press CANCEL.
3
Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.
V-CHIP SET
NEW
PASSWORD
CHANGE PASSWORD
CONFIRM
PASSWORD
:
0–9/ENTER/CANCEL/MENU
:
0-9/ENTER/CANCEL/MENU
“ ” appears instead of the number.
4
Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.
Now the password was registered and V-Chip
setting menu will appear on the display.
4
Press MENU repeatedly until the menu screen
is cleared.
V-CHIP SET
CONFIRM
PASSWORD
:
0–9/ENTER/CANCEL/MENU
24
5W20101A [E] (P24-27)
24
12/23/05, 14:34
DISPLAY
ENTER
/ / /
MENU
To set the V-Chip
1
In the V-CHIP menu, press
or
“V-CHIP SET”, then press .
to select
/
/ MENU
/
OFF
G
PG
PG-13
R
/
OFF :
TV-Y :
TV-Y7 :
TV-G :
TV-PG :
TV-14 :
TV-MA:
/
/
TV-Y
OFF
/ ENTER/MENU
or
/ ENTER/MENU
5
Press
:
:
:
:
:
or
to select “V-CHIP”.
/
6
/
/
OFF
/ MENU
Press
or
to display “ON”.
Now your settings were set into the memory.
V-CHIP
V-CHIP SET
CHANGE PASSWORD
ON
to select “MOVIE RATING”.
/
V-CHIP SET
TV RATING
MOVIE RATING
/
5W20101A [E] (P24-27)
/
V-CHIP
V-CHIP SET
CHANGE PASSWORD
TV RATING is not set
All children
7 years old and above
General audience
Parental guidance
14 years old and above
17 years old and above
When you select TV- Y7, TV-PG, TV-14 or TV-MA,
press DISPLAY to show the contained rating.
Press / or / to select the desired item you
want.
Press
/
TV-Y
PG-13
MOVIE RATING is not set
All ages
Parental guidance
Parental guidance less than 13 years old
Under 17 years old Parental guidance
suggested
NC-17 : 17 years old and above
X
: Adult only
or
to select “TV RATING”, then
Press
press or
to display the desired setting.
After setting, press ENTER.
V-CHIP SET
TV RATING
MOVIE RATING
3
V-CHIP SET
TV RATING
MOVIE RATING
TV operation
2
or
to select desired rating.
Press
After setting, press ENTER.
OFF
V-CHIP
V-CHIP SET
CHANGE PASSWORD
/
4
25
/
/
TV-Y
OFF
/ ENTER/MENU
7
/
/
/ MENU
Press MENU repeatedly until the menu screen is
cleared.
To use after the TV is protected
When the program applied to the V-Chip setting is received,
enter the password, then press ENTER. Protection can be
canceled.
Note:
The V-Chip function is activated only on programs that have
the rating signal.
12/23/05, 14:34
25
TV operation
Picture control adjustment/
Adjusting the picture preference
ENTER
Picture controls are factory preset but you can adjust them individually as follows:
And also you can select four picture modes—Standard, Sports, Movie, and
Memory—as described in the following table:
Picture control adjustment
1
Press MENU and then press
option.
or
/ / /
CANCEL
MENU
Adjusting the picture preference
to select
1
Press MENU and then press
option.
or
to select
PICTURE
AUDIO
PICTURE PREFERENCE
PICTURE
AUDIO
PICTURE PREFERENCE
Illustration of MD20F52
2
Press
.
or
/
to select “PICTURE”, then press
PICTURE
AUDIO
PICTURE PREFERENCE
/
/
2
/ MENU
PICTURE
AUDIO
PICTURE PREFERENCE
/ MENU
Press
or
to select the item you want to
adjust, then press
or
to adjust the setting.
/
/ / MENU
Illustration of MD20F52
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
/
Selection
/
0
+32
0
0
0
PICTURE PREFERENCE
STANDARD
SPORTS
MOVIE
MEMORY
/ CANCEL / MENU
/
darker
lower
paler
reddish
softer
lighter
higher
deeper
greenish
sharper
Note:
The CONTRAST default setting is set to maximum
(+32) at the factory.
After your desired setting, press MENU
repeatedly until the menu screen is cleared.
3 To return all adjustments to the factory preset levels
Press CANCEL while making picture adjustments.
26
5W20101A [E] (P24-27)
3
Press
or
to select the desired picture
mode, then press ENTER.
Pressing
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
4
/
Press
or
to select “PICTURE
PREFERENCE”, then press .
Illustration of MD20F52
3
/
Illustration of MD20F52
26
/
/ ENTER / MENU
Mode
Picture quality
STANDARD
SPORTS
MOVIE
MEMORY
Standard picture quality (factory-set)
Bright and dynamic picture (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences (set by you;
see “Picture control adjustment” on left)
4
After your desired setting, press MENU
repeatedly until the menu screen is cleared.
Note:
You cannot select “PICTURE PREFERENCE” in the Game
mode.
12/23/05, 14:35
Sound control adjustment (MD20F52 only)/
Stereo and Second Audio Program (SAP)
AUDIO SELECT
Sound controls are factory preset but you can adjust them individually as follows:
The TV/DVD is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs
with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.
/ / /
CANCEL
MENU
Sound control adjustment (MD20F52 only)
Listening to stereo sound
1
When the TV is turned on or a channel selection is
made, the “STEREO” will appear on the screen. This
means that Stereo broadcasting is available. You can
enjoy stereo sound from the left and right speakers.
Press MENU and then press
option.
or
to select
/
/
/
/ MENU
Illustration of MD20F52
2
Press
.
or
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT to
change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound.
TV operation
PICTURE
AUDIO
PICTURE PREFERENCE
to select “AUDIO”, then press
STEREO
CH 013
PICTURE
AUDIO
PICTURE PREFERENCE
Listening to SAP (Second Audio Program)
/
/ / MENU
Illustration of MD20F52
3
Press
or
to select the item you want to
adjust, then press
or
to adjust the setting.
BASS
TREBLE
BALANCE
/
/
/
STEREO SAP
0
0
0
/ CANCEL / MENU
Illustration of MD20F52
BASS:
Press
or
to adjust the bass sound.
TREBLE:
Press
or
to adjust the treble sound.
BALANCE:
Press
or
to obtain an equal sound level from
both speakers.
4
When the TV is turned on or a channel selection is
made, “SAP” will appear on the screen. This means
that the Second Audio Program broadcasting is
available.
After the desired setting is adjusted, press
MENU repeatedly until the menu screen is
cleared.
To select desired sound
Press AUDIO SELECT to select the desired sound.
SEL. STEREO
MONO + SAP BROADCASTING
MONO SOUND
(MAIN)
SAP SOUND
STEREO + SAP BROADCASTING
STEREO SOUND
(MAIN)
3 To return BASS/TREBLE/BALANCE control
adjustments to the factory preset levels
Press CANCEL while making sound adjustments.
5W20101A [E] (P24-27)
27
CH 013
SAP SOUND
MONO SOUND
(MAIN)
27
12/23/05, 14:35
Basic playback
Illustration of MD20F52
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
DVD
VCD
CD
1
3,5
5 6
4
Basic playback
Preparations:
• Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time,
you need to set “Starting setup” 18 .
• When connecting to other equipment, turn power off.
1
Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator will light.
• Every time you press POWER, the TV/DVD starts from
TV mode.
• When using an amplifier, switch on the amplifier.
5
Press OPEN/CLOSE or PLAY.
OR
The disc tray closes automatically.
On the TV-screen, “ ” changes to
“Reading” and then playback
commences.
Reading
2
Press TV/DVD to select DVD mode.
The DVD startup screen will appear on the screen.
“Reading” display will change to “No Disc”. (If DVD
disc has already loaded, playback will start automatically.)
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press C/D or B/A to select title, then press ENTER.
Title is selected and play commences.
Reading
6
3
Press OPEN/CLOSE.
The disc tray opens.
4
Place a disc on the disc tray.
Press STOP to end playback.
3 Resuming facility
• The unit records the stopped
point, depending on the disc.
“ ” appears on the screen.
Press PLAY to resume playback
(from the scene point).
• If you press STOP again (“3”
appears on the screen.), the unit
will clear the stopped point.
3 To start playback in the stop mode
Press PLAY.
With the playback
side facing down.
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the unit
to malfunction.
• Do not place a disc which is unplayable on the disc tray.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation. Disconnect the AC power cord, then connect it again.
28
5W20101A [E] (P28-30)
28
12/23/05, 14:35
TV/DVD
POWER
About DVD VCD CD
The DVD VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
: You can use this function with DVD video discs.
VCD : You can use this function with Video CDs.
CD
: You can use this function with Audio CDs and CD-R/RW CDs.
OPEN/CLOSE
PAUSE
STOP
PLAY
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press
PLAY.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
• The sound is muted during still
mode.
Basic playback
To stop playback
Press STOP.
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again 8 45 .
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,
“Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 37 .
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit
to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a
DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise
depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on your TV when viewing
DVD video discs.
29
5W20101A [E] (P28-30)
29
12/23/05, 14:35
Basic playback
Playing a disc (Continued)
PAUSE
PLAY
FF
SKIP
SLOW
REV
DVD
VCD
CD
/
Playing in fast reverse or fast forward directions
Press REV or FF during playback.
To resume normal playback
Press PLAY.
REV: Fast reverse playback
FF: Fast forward playback
Each time you press REV or FF, the
playback speed changes.
DVD
VCD
Notes:
• The TV/DVD mutes sound during reverse and forward scan
of DVD/VCD video discs. However, the TV/DVD plays sound
during fast forward or fast reverse play of audio CDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE during still playback.
To resume normal playback
Press PLAY.
Each time you press PAUSE, the
picture advances one frame.
Note:
The sound is muted during frame by frame playback.
DVD
VCD
Playing in slow-motion
To resume normal playback
Press SLOW
during playback.
Press PLAY.
Each time you press SLOW , the
slow-motion speed changes.
Note:
The sound is muted during slow-motion playback.
DVD
VCD
CD
Locating a chapter or track
Press SKIP
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Playback starts from the beginning of
the current chapter or track.
Note:
When you press twice in quick successions,
Press and hold SKIP on the unit during playback to play fast forward or fast reverse. playback starts from the beginning of
Each time you press and hold SKIP, the playback speed will change.
the preceding chapter or track.
Notes:
• A prohibition symbol “
” may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
30
5W20101A [E] (P28-30)
30
12/23/05, 14:35
Advanced playback
DISPLAY
Zooming/Locating desired scene
0–9
JUMP
ZOOM
/ / /
CANCEL
ENTER
DVD
VCD
CD
DVD
VCD
CD
Zooming
Locating desired scene
This unit will allow you to zoom in on the frame image. You Use the title, chapter and time recorded on the DVD disc to
can then make selections by switching the position of the locate the desired point to playback. In the case of VCD/CD
discs, time and track are used to locate the desired point to
frame.
playback.
Press ZOOM during playback.
To check the title, chapter and time, press DISPLAY.
1
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
1
Press JUMP during playback or stop mode.
T
2
2
/ / /
or
to select the “
Time”, “ T
T
Title/Track” or “ C Chapter”.
T
T
C
to view a different part of the
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
3
Press
Advanced playback
• “Time” works only in DVD playback
or DVD resume mode.
1
Press
frame.
C
3
In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view ( Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
Press Number buttons (0–9) to input the number.
T
C
12
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the JUMP does not
work. To turn off PBC, see page 37 .
31
5W20101A [E] (P31-33)
31
12/23/05, 14:35
Advanced playback
Marking desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
/
ENTER
CANCEL
MARKER
DVD
VCD
1
Marking the scenes
1
Press MARKER during playback.
2
DVD
VCD
Returning to the scenes
Press MARKER during playback or stop mode.
1 00:27:54
!
Select the blank Marker using
or
press ENTER at the desired scene.
, then
2
Press
or
3
2
3
1 00:27:54
3
3 02:08:31
to select the Marker 1-3.
• Up to 3 scenes can be selected.
• Repeat this procedure to set the
other 2 scenes.
1 00:27:54
2 01:16:25
2 01:16:25
3 02:08:31
Press ENTER.
Playback starts from the marked
scene.
Press MARKER to clear this display.
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
Notes:
• Some discs may not work with the marking operation.
• The marking is cancelled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
• In case of Video CD with PBC, the MARKER is prohibited.
32
5W20101A [E] (P31-33)
32
12/23/05, 14:35
Repeat playback/A-B Repeat playback
PLAY MODE
/
ENTER
PLAY
REPEAT A-B
DVD
VCD
CD
1
2
DVD
VCD
CD
Repeat playback
Press PLAY MODE during playback or stop mode.
A-B repeat playback allows you to repeat a section between
two selected points.
1
[DVD]
Press
A-B Repeat playback
Press REPEAT A-B during playback.
The start point is selected.
A
/
to select “Chapter” or “Title”.
The unit automatically starts repeat
playback after finishing the current title
or chapter.
:
Off
2
Advanced playback
Repeat
Press REPEAT A-B again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point and
returns to Point A automatically, then
starts again.
[Video CD, Audio CD,
MP3/WMA CD (MD20F52 only)]
Press
to select “Repeat” and then press
ENTER to select “Track” or “All”.
A B
The unit automatically starts repeat
playback after finishing the current
track.
Play Mode : Off Repeat : Off
/Enter/Play Mode
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
To resume normal playback
Press REPEAT A-B again.
“
3
Press PLAY MODE again to clear the screen.
To resume normal playback
Select Repeat : “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, Repeat functions are prohibited during playback.
Off ” appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You cannot set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD and MP3/
WMA CD (MD20F52 only).
• A-B Repeat is prohibited when PBC is on.
33
5W20101A [E] (P31-33)
33
12/23/05, 14:35
Advanced playback
Program playback/Random playback
0–9
You can arrange the playback order of tracks or files on the disc. And also
the unit can playback tracks or files in random order. These feature works for
Audio CD, Video CD, MP3/WMA CD (MD20F52 only) and JPEG CD.
VCD
CD
1
Program playback
4
Press PLAY MODE in the stop mode.
1
2
3
Clear
3
to continue
• In case of JPEG file, press SKIP
the program playback if the JPEG interval is set to
“Off”, see page 44 .
• To resume normal playback, select Play Mode:
“Off” in step 2.
Press
or
to select Play Mode, then press
ENTER to select “Program”.
Play Mode : Program
4
5
6
:
Repeat
7
8
9
Off
10
11
12
T Program Playback
/Enter/0 9/Cancel/Play Mode
Press / / / to select the programming position. Use Number buttons (0–9) to input the
Track or file numbers.
• To program others, repeat Step 3.
• If you input a wrong number, press
CANCEL.
Press / / / to select “Program Playback”
and press ENTER.
The programs you selected will start to playback in
order.
2
PLAY MODE
▲/▼/ /
CANCEL
PLAY
SKIP7
ENTER
!"#!
!#! ■ To change the program
1. In the program mode, press / / / to select the track
/file number.
2. Press Number buttons (0–9) to select the track/file number
to be replaced.
■ To clear the program one by one
In the program mode, press / / / to select the track
/file number. Then press CANCEL.
■ To clear all the programs
In the program mode, press / / /
to select “Clear”.
Then press ENTER.
Note:
The program is canceled when you open the disc tray or turn
the power off.
VCD
CD
Random playback
1
Press PLAY MODE during playback or stop
mode.
2
Press / to select Play Mode, then press
ENTER to select “Random”.
The Random Playback will start.
• In case of JPEG file, press SKIP
to continue the random playback if
the JPEG interval is set to “Off”, see
page 44 .
• If you set “Random” during
playback mode, Random playback
will begin after the track/file that is
currently being played has ended.
• To resume normal playback, select
Play Mode: “Off” in step 2.
Note:
In case of Video CD with PBC, you cannot set Random
function during playback.
34
5W20101A [E] (P34-40)
3
Press PLAY.
34
12/23/05, 14:36
Changing angles/Title selection/DVD menu
ENTER
DVD MENU
▲/▼/ /
PLAY
ANGLE
TOP MENU
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
1
Press ANGLE during playback.
The current angle will appear.
2
Press ANGLE repeatedly until the desired angle
is selected.
1/9
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
1
Press TOP MENU during playback.
2
Press
Title menu appears on the screen.
/
/
/
3
Press ENTER or PLAY.
The playback of the selected title will
start.
Advanced playback
Title selection
to select the desired title.
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you playback these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
1
Press DVD MENU during playback.
The DVD menu appears on the screen.
• Press DVD MENU again to resume
playback at the scene when you
pressed DVD MENU.
2
Press
/
/
/
to select the desired item.
3
Press ENTER.
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
Note:
Depending on the DVD, you may not be able to resume
playback from the scene point when you pressed DVD MENU.
35
5W20101A [E] (P34-40)
35
12/23/05, 14:36
Advanced playback
Changing soundtrack language/
Subtitles
DVD
VCD
Changing soundtrack language
You can select the language when you play a multilingual disc.
1
SUBTITLE
AUDIO SELECT
Press AUDIO SELECT during playback.
The current soundtrack language will
appear.
Subtitles
When playing back a disc recorded with subtitles, you can
select the subtitle language or turn the subtitle off.
1
Press SUBTITLE repeatedly during playback until
the desired language is selected.
1/8 Eng
1/8 Eng
2
D
Press AUDIO SELECT repeatedly until the desired
language is selected.
2/8 Fra
Off
In case of Video CD playback
Audio type changes as follows each time you press
AUDIO SELECT.
L
To turn off the subtitle, press SUBTITLE until
“Off” appears.
D
• The on screen display will disappear after a few
seconds.
LR
2
• The on screen display will disappear after a
few seconds.
Notes:
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when you
open or close the disc tray.
• In some cases, a selected subtitle language may not be
changed immediately.
R
Notes:
• If the desired language is not heard after pressing the button
several times, the language is not recorded on the disc.
• The selected soundtrack language is canceled when you open
the disc tray. The initial default language or available language
will be heard if the disc is played back again.
• If you select DTS in playing DTS-encoded disc, no sound will
be heard from the TV/DVD’s speakers.
36
5W20101A [E] (P34-40)
36
12/23/05, 14:36
1
Disc status/To turn off the PBC
DISPLAY
PLAY MODE
/
ENTER
DVD
VCD
CD
Disc status
VCD
To turn off the PBC
Press DISPLAY during playback. The status display
of the disc will appear on the screen in order like
the figure below.
1
Press PLAY MODE in the stop mode.
DVD
2
Press / to select Play Mode, then press
ENTER to select “Off”.
Title elapsed playing time
Play status
00:03:13 01:30:32
Title total time
Chapter No
T
1/2
C
1/2
Subtitle language
1/1 Eng
3
00:03:13 01:30:32
Press PLAY MODE again to clear the screen.
Type of audio
1/2 Fra
D
1/1
Camera angle
Audio language
Display Off
To turn on the PBC
Select Play Mode : “PBC” in step 2.
Note:
You can also turn off the PBC by pressing number button 1
and ENTER in the stop mode.
Advanced playback
Title number
VCD (with PBC)
Title elapsed playing time
Play status
Title number
T
PBC
05:28
45:03
1/1
05:28
45:03
Title total time
Display Off
Audio CD
Track elapsed playing time
Play status
Track number
T
11/99
34:56
71:33
Track total time
• When you play a CD disc, the status display will
appear and remain on the screen.
37
5W20101A [E] (P34-40)
37
12/23/05, 14:36
Advanced playback
MP3/WMA CD (MD20F52 only)/JPEG CD information
This unit can playback the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/
JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
The Apple-HFS-System cannot be played.
MD14F52 cannot playback the MP3/WMA-data which has been recorded on CD-R or CD-RW.
Note:
This unit requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats
(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannot
guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this
owner’s manual are meant as a guide only.
Please be advised that you must obtain permission from the applicable copyright owners to download copyrighted
content, including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof.
Toshiba has no right to grant and does not grant permission to download any copyrighted content.
CD
MP3/WMA CD (MD20F52 only)/JPEG CD information
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”, “wma”, “jpg”.
• MP3/WMA/JPEG CD must be correspond to the ISO standardized files.
• This unit can read 600 files per disc. If one directory has more than 600 files, it reads up to 600 files, the
remaining files will be omitted.
• The unit is able to recognize up to a maximum of 50 directories per disc.
• MP3/WMA/JPEG CDs cannot be used for the purpose of recording.
• If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System” (HFS) cannot be played.
Limitations on display
• The maximum number for display is 16 letters.
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To playback MP3/WMA/JPEG CD in the recorded order,
1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.
• The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.
Standard, sampling frequency, and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA CD
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
Microsoft, Windows Media, and the Windows Logo are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
38
5W20101A [E] (P34-40)
38
12/23/05, 14:36
MP3/WMA CD playback (MD20F52 only)
0–9
MD14F52 cannot playback the MP3/WMA-data which has been
recorded on CD-R or CD-RW.
ENTER
▲/▼/
/
STOP
PLAY
CD
1
2
MP3/WMA CD playback (MD20F52 only)
Place a disc on which MP3 or WMA files have
been recorded onto the disc tray.
A file menu screen will appear on the screen.
A or ENTER to select folder.
Press B/A
-/72 --:--
CD
1
2
3
4
5
6
7
Pops
8
Japan
9
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
/0-9/Enter/Play Mode
5
Press STOP to end playback.
• The unit records the stopped point. “ ” appears on
the screen. Press PLAY to resume playback (from
the scene point).
• If you press STOP again or unload the disc, the unit
will clear the stopped point.
About file menu
Advanced playback
Illustration of MD20F52
Operation
3
D/B
B/A
A or Number buttons (0–9) to
Press C/D
select the desired file.
Media type
Elapsed time
File number
Folder
• In case the folder includes more than 14 files, press
B or A to display next file list.
-/72 --:--
CD
1
2
3
4
5
6
7
Pops
8
Japan
9
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
-/72 --:--
CD
15
16
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
Pops
Mother
Hold Your Last
Illustration of MD20F52
: Indicates MP3 file
: Indicates WMA file
: Indicates JPEG file
/0-9/Enter/Play Mode
/0-9/Enter/Play Mode
Illustration of MD20F52
• When PLAY is pressed after the file menu is displayed, or when the disc tray has been closed using
PLAY, playback begins automatically starting from
the first file. In this case, if the first file is an MP3/
WMA file, only MP3/WMA files are played back in
order. If the first file is a JPEG file, the first JPEG file
is played back.
4
/0—9/Enter/Play Mode
Press ENTER.
The selected file starts playing back.
Notes:
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
• MP3 or WMA file on the Kodak Picture CD is not recognized on this unit.
Notes:
• During MP3/WMA/JPEG playback, you cannot use JUMP and
A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA playback 33 34 .
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
39
5W20101A [E] (P34-40)
39
12/28/05, 3:02 PM
Advanced playback
JPEG CD playback
0–9
You can select your desired JPEG file on the file menu and picture menu.
The selected JPEG file is automatically adjusted to the TV screen. (When the
aspect ratio of the JPEG file is different to your TV screen, the black bar will
appear at the top and bottom, or the both sides of the TV screen).
1
2
JPEG CD playback
A file menu screen will appear on the screen.
Press / to select folder.
-/36
CD
Collection
Pic-1
Pic-2
Pic-3
Pic-4
Pic-8
Pic-9
Pic-10
Pic-11
Press / / / or Number buttons (0–9) to select the desired file.
• To display next list, press SKIP
4
8
9
10
11
or
.
Press ENTER. The selected picture appears on
the screen.
Rotating an image
You can rotate an image by 90 degrees. Press
ANGLE during playback of the image.
”, “
”, “
” or “
” appears briefly
“
on the screen.
5
Preparation:
Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or
“15 Seconds” 44 .
1
2
Select your desired starting file for the slide
show in the step 3 on left.
Press ENTER to start slide show from the selected file.
• If you press PAUSE during the slide show, the slide
show stops temporary. “ 4 ” appears briefly on the
screen.
If the picture appears upside down or sideways, press
ANGLE repeatedly until it’s right side up.
“
”, “
”, “
” or “
” appears briefly
on the screen.
again to resume the slide show.
Press PLAY or SKIP
• When the slide show playback finished, the file list appears.
• To stop the slide show, press STOP. The file list appears.
Notes:
• During JPEG playback, you cannot use SEARCH and A-B
Repeat functions.
• You can use Repeat (Track or All), Random and Program
functions for JPEG CD playback 33 34 .
40
40
/
Slide show playback
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat steps
3 ~ 4.
5W20101A [E] (P34-40)
▲/▼/
The slide show enables you to view pictures (files) one after
another automatically.
Place a JPEG disc on the disc tray.
1
2
3
4
3
CD
ENTER
STOP
PLAY
SKIP /
ANGLE
CAUTION:
Some JPEG CDs cannot be played back depending on the recording conditions.
CD
PAUSE
12/23/05, 14:36
Function setup
Customizing the function settings
You can change the default settings to customize performance
to your preference.
ENTER
▲/▼/
/
SETUP
RETURN
DVD
VCD
CD
1
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
5
To clear SETUP screen, press SETUP or
RETURN.
/Enter/Setup/Return
or to select the desired section, then
or ENTER.
3
Press
or
4
Change the selection using or , by referring
to the corresponding pages 43 ~ 45 .
Function setup
2
Press
press
to select the desired option.
• Repeat steps 3 and 4 to change
other settings.
• To select another operation, go
back to step 2 by pressing
repeatedly.
41
5W20101A [E] (P41-46)
41
12/23/05, 14:37
Function setup
Customizing the function settings (Continued)
Setting details
Section
Page
Option
Details
Menu
Subtitle
Audio
To select the language of “Menu”, “Subtitle” and
“Audio” if more than one language are recorded on
the disc.
TV Screen
To select a picture size according to the aspect
ratio of your TV.
Display
To turn On or Off the operational status display on the
screen.
Picture Mode
To select a preferred picture mode from “Video”,
“Film” or “Auto”.
JPEG Interval
To select a preferred setting for the slide show playback.
43
DRC
To select On or Off for DRC (Dynamic Range Control).
Password
Input 4-digit password to set the parental level.
Parental
To select a preferred parental level for the parental
setting.
Select Files
(MD20F52 only)
To select a preferred file type for playing back a CD
containing a mixture of file types.
42
5W20101A [E] (P41-46)
42
12/23/05, 14:37
44
45
Menu
Subtitle
Audio
TV Screen
4:3
Display
On
Picture Mode
Auto
JPEG Interval
Off
English
English
English
/Setup/Return
/Setup/Return
TV Screen
Menu, Subtitle, Audio
You can select the language of “Menu”, “Subtitle” and
“Audio” if more than one languages are recorded onto
the disc.
English, Francais, Espanol:
The selected language will be heard or seen.
Original (Audio):
The unit will select the first-priority language of
each disc.
Off (Subtitle):
Subtitles do not appear.
Notes:
• If the selected language is not recorded on the disc, the
first-priority language is selected.
• If you want to change the OSD language, you can perform it by TV MENU 19 .
4:3
: (Letter box)
Select this mode when connecting to a conventional
TV. When playing back a wide screen-DVD disc, it
displays the wide picture with black bands at the
top and bottom of screen.
4:3
: (Pan & scan)
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
Function setup
Other:
Other language can be selected (see “Language
code list” 47 ).
You have the following screen sizes to choose from:
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the Pan & scan style,
it will display 4:3 style.
Display
On screen display can be switched on or off when you
press any buttons.
On: On screen displays appear when you press
any buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
43
5W20101A [E] (P41-46)
43
12/23/05, 14:37
Function setup
Customizing the function settings (Continued)
Setting details
Picture Mode
There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video
content (video signals recorded at 30 frames per second). Make this selection according to the type of content
being viewed.
Auto: Select this position normally.
The DVD player automatically detects source
content, film or video of playback source,
and converts that signal in the progressive
output format in an appropriate method.
Film:
The DVD player converts film content pictures
in the progressive output format appropriately. Suitable for playback of film content
pictures. The progressive output feature will
be most effective under this selection.
Video: The DVD player filters video signal and
converts it in the progressive output format
appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or doubled.
In this case, select “Video”.
DRC
/Setup/Return
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: Loud sound such as explosion is toned
down slightly when played back. This is
suitable when it is connected to a stereo.
Off: It plays back at the recording level on the
disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
JPEG Interval
You can continuously playback all JPEG files automatically.
After the selection below, the disc will start playback on
which JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
44
5W20101A [E] (P41-46)
44
On
12/23/05, 14:37
To change the parental level
Illustration of MD20F52
Parental control setting
Some discs are specified as not suitable for children.
Such discs can be limited not to playback with the unit.
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
If you forget the password.
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. Press and hold STOP on the front panel, and at the
same time press 7 on the remote control until
“PASSWORD CLEAR” appears on the screen.
5. Enter a new password again.
Function setup
1) Press C or D to select “Parental”, then press B
or A until the parental level you require to appear.
• Level Off: The parental control setting does not
function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select “Password”.
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CANCEL.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can
not be changed unless you enter the correct
password.
4) Press OPEN/CLOSE to activate Parental control
setting. (See “Temporary cancel the rating level
by DVD disc” 46 .)
1) Press C or D to select “Password”.
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select “Parental”, then press B
or A to change the parental level.
5) Press C or D to select “Password”, then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
Select Files (MD20F52 only)
When playing back a CD containing a mixture of MP3,
WMA and JPEG files, only MP3/WMA or JPEG files can
be displayed on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
Note:
If each setup 43 ~ 45 has completed, the unit can always
work under the same condition (especially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
45
5W20101A [E] (P41-46)
45
12/23/05, 14:37
Function setup
OPEN/CLOSE
Temporary cancel the rating level by DVD disc
0–9
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
▲/▼
ENTER
PLAY
RETURN
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit 28 .
4
Enter the password with Number buttons (0–9).
Then press ENTER.
To exit from the entry, press RETURN.
2
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
Reading
Playback will commence if the entered
password is correct.
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
3
5
If you wish to cancel the set rating level temporarily, select “Parental Control Level” with
or
, then press ENTER. If the 4-digit password at
step 2 on page 45 has been set, the password
entering screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or
have forgotten) the password, select “Cancel
Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
46
5W20101A [E] (P41-46)
46
12/23/05, 14:37
Others
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” 43 .
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance2823 Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
Others
Language Name Code
47
5W20101A [E] (P47-51)
47
12/23/05, 14:37
Others
Troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer
or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
POWER
TV/DVD does not operate.
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
5
• Station or Cable TV experiencing problems, tune to another station.
• Check Volume adjustments.
• Check sound control adjustments (MD20F52 only).
• Check for sources of possible interference.
20
20
27
50
TV BROADCAST RECEPTION
Poor sound or no sound.
Poor picture or no picture.
• Station or Cable TV experiencing problems, tune to another station. 20
13, 14
• Check antenna or Cable TV connections, reorient antenna.
50
• Check for sources of possible interference.
26
• Check picture control adjustments.
• Station or Cable TV experiencing problems, tune to another station.
Poor reception on some channels. • Station signal is weak, reorient antenna to receive weaker station.
• Check for sources of possible interference.
Poor color or no color.
Picture wobbles or drifts.
No CATV reception.
20
13
50
• Station or Cable TV experiencing problems, tune to another station. 20
• Make sure channels are set into memory.
23
• Check picture control adjustments.
26
• Check antenna or Cable TV connections, reorient antenna.
13,14
• Check for sources of possible interference.
50
• Station or Cable TV experiencing problems, tune to another station. 20
23
• Make sure channels are set into memory.
–
• Cable TV company is scrambling signal.
13, 14
• Check antenna or Cable TV connections, reorient antenna.
• Check all Cable TV connections.
14
• Set TV/CABLE selection to the CABLE position.
23
• Station or Cable TV system problems, try another station.
20
Horizontal or diagonal bars on
screen.
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
No reception above channel 13.
• Make sure TV/CABLE selection is in the appropriate position.
• If using antenna, check UHF antenna connections.
23
13
TV shuts off.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
20
21
–
Closed - Caption is not activated.
• TV station experiencing problems or program tuned is not closed
20
captioned. Try another channel.
• Check Cable TV connection or VHF/UHF antenna, reposition or 13,14
rotate antenna.
• Press CLOSED CAPTION button to turn on the closed caption
22
decoder.
Display is not shown in your
language.
• Select proper language in the menu options.
48
5W20101A [E] (P47-51)
48
12/23/05, 14:37
13,14
50
19
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
28
7
8
No picture.
• TV/DVD selector is not set correctly.
28
No sound.
• Check the input selector of the amplifier is set properly.
• The unit is in the special playback mode.
• Select the correct Audio Output position on AV amplifier.
–
30
–
Picture is distorted during fast
reverse/forward playback.
• The picture will be distorted occasionally.
–
Stopping playback, search, slowmotion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
–
No on-screen display.
• Select Display to On.
43
No surround sound.
• The setup does not match your stereo system.
16
The unit or remote operation key
is not functioning.
• Turn off the unit and unplug the AC power cord for several
minutes, then replug it.
Playback does not start when the
title is selected.
• Check the Parental setup.
Audio soundtrack and/or subtitle
language is not changed when
you playback a DVD.
• Multilingual language is not recorded on the DVD disc.
–
45
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
36
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
35
• The function is prohibited with the unit or the disc.
30
• Aim at the remote control at the remote sensor.
• Operate within approx. 5 meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
12
“
” appears on the screen.
Others
36
REMOTE CONTROL
The remote control does not
function.
49
5W20101A [E] (P47-51)
49
12/23/05, 14:37
Others
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF
antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable
TV system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is
the direct path and the other is reflected by tall buildings, hills or other
large objects. Changing the direction or position of the antenna may
improve the reception.
SNOW
If the TV/DVD is located far from the TV station, in a fringe reception
area where the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external
antenna may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a
loss of contrast in the picture. Changing the direction and position of
the antenna or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST
or BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
50
5W20101A [E] (P47-51)
50
12/23/05, 14:37
Specifications
MD14F52
MD20F52
General
AC 120 V 60 Hz
Operation: 90 W, Stand by: 3 W
Operation: 115 W, Stand by: 3 W
14 Inch* (357.0 mm diagonal)
20 Inch* (508.0 mm diagonal)
1-1/2 x 2-11/16 inches (38.1 x 68.6 mm), 8 ohm x 2 1-13/16 x 3-7/8 inches (45.7 x 99.1 mm), 8 ohm x 2
1.0 W + 1.0 W
2.5 W + 2.5 W
29.8 lbs (13.5 kg)
55.1 lbs (25.0 kg)
Width: 17-5/16 inches (440mm)
Width: 22-5/8 inches (574 mm)
Height: 15-1/2 inches (393 mm)
Height: 20-1/4 inches (514.5 mm)
Depth: 15-7/16 inches (392.5 mm)
Depth: 18-15/16 inches (481.5 mm)
181 channel freq. synthesized
VHF
2-13
UHF
14-69
CATV
125 Channels
UHF/VHF: 75 Ω coaxial
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)
DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz
Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal
Power supply
Power consumption
Picture tube
Speaker
Audio output power
Weight
Dimensions
Tuner
Antenna input
Applicable disc
Frequency range
Operating conditions
Input/Output
Video input
Audio input
Audio output (DIGITAL COAXIAL)
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1 1.0 V (p-p), 75 Ω, negative sync., pin jack x 2
–8 dBm, 50 kΩ, negative sync., pin jack (L/R) x 1 –8 dBm, 50 kΩ, negative sync., pin jack (L/R) x 2
0.5 V (p-p), 75 Ω, pin jack x 1
Supplied accessories
Others
Remote control (DC-SB2) ..................................... 1
Batteries (R03/AAA) ............................................. 2
300-75 Ω matching transformer ............................ 1
* Screen size is approximate.
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
51
5W20101A [E] (P47-51)
51
12/23/05, 14:37
Others
Limited warranty
Limited United States Warranty
for CRT-based TV/DVD Combinations, TV/VCR Combinations, and TV/DVD/VCR
Combinations, 25" and Smaller ("TV Combination(s)")
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers in
the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR
ANY PERSON RECEIVING THIS TV COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER
AND TO NO OTHER PURCHASER OR TRANSFEREE.
TV COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.,
INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
TV COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Ninety (90) Day Warranty on Labor
TACP warrants this TV Combination and its parts against defects in materials or workmanship for a period of ninety
(90) days after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION,
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO
YOU FOR PARTS OR LABOR.
Limited One (1) Year Warranty on Parts
TACP further warrants the parts in this TV Combination against defects in materials or workmanship for a period of
one (1) year after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION,
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO
YOU FOR THE PART, PROVIDED THAT IF A DEFECTIVE PART IS REPAIRED OR REPLACED AFTER NINETY
(90) DAYS AFTER THE DATE OF ORIGINAL RETAIL PURCHASE, YOU MUST PAY ALL LABOR CHARGES IN
CONNECTION WITH THE REPAIR OR REPLACEMENT THEREOF.
Limited Two (2) Year Warranty on Picture Tube
TACP further warrants the picture tube in this TV Combination against defects in materials or workmanship for a
period of two (2) years after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP'S
OPTION, REPAIR OR REPLACE A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED PICTURE
TUBE WITHOUT CHARGE TO YOU, PROVIDED THAT IF A DEFECTIVE PICTURE TUBE IS REPAIRED OR
REPLACED AFTER NINETY (90) DAYS AFTER THE DATE OF ORIGINAL RETAIL PURCHASE, YOU MUST PAY
ALL LABOR CHARGES IN CONNECTION WITH THE REPAIR OR REPLACEMENT THEREOF.
Rental Units
The warranty for TV Combination rental units begins on the date of the first rental or thirty (30) days after the date of
shipment to the rental firm, whichever comes first.
Limited Warranty for Commercial Units
TACP warrants TV Combinations that are sold and used for commercial purposes as follows: all parts are warranted
against defects in materials or workmanship for a period of ninety (90) after the date of original retail purchase.
DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A
NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU.
Owner's Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this TV Combination.
Complete and mail the enclosed product registration card or register your TV Combination online at www.tacp.toshiba.com/
service as soon as possible. By registering your TV Combination you will enable TACP to bring you new products
specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required
under the U.S. Consumer Product Safety Act. Failure to complete and return the product registration card does not
diminish your warranty rights.
52
5W20101A [E] (P52-Back)
52
12/23/05, 14:37
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) You must retain your original bill of sale or provide other proof of purchase.
(2) All warranty servicing of this TV Combination must be performed by an Authorized TACP Service Station.
(3) The warranties from TACP are effective only if this TV Combination is purchased and operated in the Continental
U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of customer controls, and installation or repair of
antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems,
misaligned satellite dishes, cable television distribution, VCRs, DVD players/recorders, personal computer level
IEEE-1394 devices, and any other connected signal source device are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any TV
Combination or parts that have been lost or discarded by you or to damage to the TV Combination or parts
caused by fires, misuse, accident, Acts of God (such as lightning or fluctuations in electric power), improper
installation, improper maintenance, or use in violation of instructions furnished by TACP; use or malfunction
through simultaneous use of this TV Combination and connected equipment; or to units that have been modified
or had the serial number removed, altered, defaced, or rendered illegible.
How to Obtain Warranty Service
If, after following all of the operating instructions in this manual and reviewing the section entitled "Troubleshooting,"
you find that service is needed:
(1) To find the nearest TACP Authorized Service Station, visit TACP's website at www.tacp.toshiba.com/service or
contact TACP's Consumer Solution Center toll free at 1-800-631-3811.
Others
(2) You must present your original bill of sale or other proof of purchase to the TACP Authorized Service Station. You
must deliver the entire TV Combination to a TACP Authorized Service Station. You must pay for all transportation
and insurance charges for the TV Combination to and from the TACP Authorized Service Station.
For additional information, visit TACP's website:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF
ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES,
AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR OR REPLACEMENT
OF ANY PARTS. IN NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR
ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS TV COMBINATION).
No person, agent, distributor, dealer, or company is authorized to change, modify, or extend the terms of these warranties
in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP
arising under the warranty or under any statute or law of the United States or any state thereof is hereby limited to
ninety (90) days from the date you discover, or should have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any state of the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW
LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, WHEN AN ACTION MAY BE BROUGHT, OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THEREFORE, THE
ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
53
5W20101A [E] (P52-Back)
53
12/23/05, 14:37
Memo
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
5W20101A [E] (P52-Back)
54
12/23/05, 14:37
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
5W20101A [E] (P52-Back)
55
12/23/05, 14:37
Printed in Thailand
J5W20101A SH 06/01 N
5W20101A [E] (P52-Back)
56
12/23/05, 14:37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement