- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power supply units
- Emerson
- ALP-430
- User manual
advertisement
388 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Options and Accessories
Everything else you need for a successful application
Control Techniques and its distributors
and integrators participate in the
“One Source” program to assist customers in getting the best price for matched drive system peripherals. This includes motors, actuators, reducers, encoders, and other items typically found in electronic drive applications.
Training, Field Service, Repairs, and on-going Support
Control Techniques provides factory authorized repairs and field services for both new and legacy Control Techniques and Emerson products. We offer a wide variety of support services from application engineering and startup, to emergency service, and custom service agreements. In addition, Control Techniques also provides an array of training opportunities online, in our Drive and Service Center classrooms, and on the factory floor.
For complete and up-to-date information on training opportunities, go to: www.emersonct.com and select Support/Downloads, then Training.
Operator Interfaces
Optional keypads, remote keypads, operator interface terminals enable greater control and oversight of your drives and applications. Our unique open communications platform allows drive-to-drive, drive-to-PLC, drive-to-
I/O, and drive-to-operator interface communication. HMI offerings extend from 2-line terminals to color-touch screen panels.
Cabling and Connectors
All the interconnect components necessary for single and multiple motor systems, feedback devices, single- and multi-drop communications, I/O, routers, software and operator interface connections can be found in this section.
To assist you in finding the right cabling and connectors, refer to the cabling diagrams on the following Interconnect Component pages.
Power Accessories
Control Techniques provides dynamic braking resistors, isolation transformers, filters, and line and load reactors that protect your drive system, and enhance safe operation. The tables in this section will help you match the right component to your system requirements.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
“One Source” for AC products
Control Techniques can supply AC motors from 1/4 hp to 1500 hp. Motor enclosures include totally open drip proof, totally enclosed fan cooled, totally enclosed nonventilated, and totally enclosed blower cooled. A variety of voltages are available along with mechanical and electrical modifications and accessories. Control
Techniques can supply virtually any type of AC variable speed motor to meet your needs.
“One Source” for DC products
Every Control Techniques distributor has access to the motors and accessories needed to complete your DC drive application through our “One Source” program.
Using the buying power of Emerson, Control Techniques works closely with its distributors and customers to fulfill the promise of delivering the best possible price and performance solution on the market today.
Our DC motors range from 1/4 hp to 1600 hp. Our DC motor enclosures include totally enclosed fan cooled, totally enclosed nonventilated, drip proof guarded and drip proof guarded force ventilated. A variety of armature and field voltages are available along with mechanical and electrical modifications and accessories.
We can supply virtually any type of DC motor to meet your needs.
“One Source” for Motion Control
Control Techniques offers its motion control customers industry standard, specialized options and accessories from select leading companies to complement the wide breadth of products we manufacture. This allows our customers to obtain the very best solution from only
“One Source” providing piece of mind in their selecting the very best motion solutions available in the industry.
Options and Accessories
389
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
Support Services
Training, Field Service, Repairs and After Market Solutions
Start up
Control Techniques’ Engineers can
install, commission and start up your new system – on time and on budget. Our experienced Field
Service Engineers commission and validate each device in your system. They work with your personnel during start-up to assure the integrity of the system and its operating parameters. Call 1-800-893-
2321 and ask for Start Up Service. Go to Support at www.emersonct.com for Start Up Fixed Pricing.
Warranty Service
Rely on our extended coverage options long after your initial investment. Control Techniques offers you the best warranty coverage in the industry. We recommend our optional Three Year Extended Product
Warranty on high performance drives, for a total of up to five years of worry-free coverage. You can purchase the three year extension anytime during the original warranty, provided your drive is in proper working condition. Call 1-800-893-2321.
390
Training
Support your drives with
comprehensive instruction on programming and diagnostics.
Control Techniques training programs help new and experienced users learn how to use and gain the most value from our products. Custom training programs can also be provided at your facility. Our classes are designed for audiences ranging from maintenance personnel to automation engineers. For more information visit the web site, or email or call the Grand Island Training center at [email protected] 1-800-893-2321.
Application
Support
The Application Support Program helps customers who don’t have the time or resources to learn new software and at the same time implement a new drive system by developing their applications. For details, go to Application Support on the web site and download the Application Support PDF.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
Authorized
Factory Service
Come to Control Techniques for your only source of Authorized
Factory Repairs. All repairs include the latest product updates, are certified to current factory specifications. All repairs carry a oneyear warranty. Guaranteed standard repair is five days, emergency repair is 48 hrs. Call 1-800-893-2321.
Policies, procedures and RMA available on the web site.
Call on local technicians for expert servicing and support.
Factory authorized support is just a phone call away.
Field Service
From start-up assistance to
emergency field service or technical assistance our experienced
Engineers stand ready to answer your calls around the clock, any day of the week, at 800-893-2321.
Control Techniques services its legacy drives, and those of past Emerson companies, such as US Motors, Burton,
WER, Emerson Industrial Controls, Browning and Morse.
Custom Service
Programs
Control Techniques develops
customized service programs to meet your exact needs. Our skilled
Engineers know best how to maximize uptime for your system, freeing up your maintenance staff for other duties. We offer one, three and five-year agreements, encompassing a broad range of services. Our preventive maintenance program can include your drives, motors, interface devices, networks and system components. Call
1-800-893-2321 and ask for Service Programs.
CR
IT
ICAL SPARE
S
Critical Spares
Safeguard your productivity with an on-site supply of essential
parts and/or spares. In addition to fully warranted, reconditioned drives, Control Techniques offers a full range of parts to support both current and legacy products. Most orders are processed and shipped the same day received. Our customized replacement Parts
Kits provide the key components for timely replacement.
Call 1-800-893-2321. Use our web site to search legacy product information.
Upgrade
Assistance
Technology constantly changes, and so do the demands on your system. When you’re ready to take your process to the next level, our experts can help by performing a comprehensive review of your process, identifying opportunities for improvement, and preparing a comprehensive plan from goals through production.
Call 1-800-893-2321 to schedule upgrade assistance.
Options and Accessories
391
392 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Operator Interfaces
CTVue – Graphical HMI
The powerful CTVue HMI line and integrated drivers for
Control Technique drives make it easy to integrate HMI with CT drives. The broad offering of CTVue HMI’s are easy to program with the free and easy to use CTVue configurator software. The broad hardware offering also ensures there is a CTVue HMI that balances your price and functionality needs.
For small displays, the economical 303L and 303M provide a 3” monochrome graphical LCD display. The
303L is the low cost choice with only one RS485 port.
The 303M is full featured with one Ethernet, two RS232, one RS485 and one Compact Flash port.
The Compact Flash port allows for storage and transfer of data from a variety of external data sources using a standard compact flash card (not included).
For medium displays, the 306M/A 6” and 308A 8”, graphical touch screens provide larger screens for better display of graphics. 306 and 308 versions include
Ethernet, one RS485, two RS232, and one compact flash port. The TFT active matrix “A” version provides the brightest, clearest, widest viewable display while the
TFT “C” versions provide color touch graphics. The LCD
“M” version is a low cost monochrome graphical display.
For large displays, the 310C and 315C graphical color touch screens provide the most graphical display area while offering all the connectivity and features of the 306 and 308 series. A super bright NEMA 4X outdoor version of the 310S is available upon request.
Integrated Control Techniques Drivers
Remote Web and FTP access
Powerful Protocol Converter
USB Programming Port
Alarming and Data Logging
Bright TFT Color Display Offerings
Free Programming Software
Simple To Use Software
Flexible Compact Flash Slot
Security User Levels/Passwords
Available Front Foil Customization
Large 4 Mb/8 Mb Onboard Flash Memory
For Use in Hazardous Locations
Easily create your customized machine interface with the free CTVue configurator software.
CTVUE-303L/M/S
3”, 128 x 64, LCD Display
Ethernet (M), RS485, and
RS232 (L) port,
Outdoor version available (S)
8 x Customizable Function Keys
Compact Flash Slot
4 Mb Non-Volatile FLASH memory
CTVUE-306M/A
5.7” Graphic Touch Display
TFT (A) - 320 x 240, 256 color
Compact flash Slot,
4/8 Mb onboard Flash
LCD (M) 320 x 240, Monochrome
Ethernet Port, RS485 and RS232
CTVUE-308A
8.4” Graphic Touch TFT
Ethernet, RS485, RS232
Compact Flash Slot,
8 Mb onboard Flash
CTVUE-310C
CT Vue
10.4” Graphic Color Touch
640 x 480, TFT 256 colors
Compact Flash Slot,
8 Mb onboard Flash
Outdoor Version
Available Upon Request
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
CTVUE-315C
CTVUE ORDERING CODES
Order Code
CTVUE-303L
CTVUE-303M
CTVUE-303S
CTVUE-306M
CTVUE-306A
CTVUE-308A
CTVUE-310C, -310S*
(*UV protection)
CTVUE-315C
CTVUE-CF512
Description
3” 128 x 64 LCD ,
1 x RS485
3” 128 x 64 LCD,
Ethernet, RS485,
RS232, compact flash
3” 128 x 64 LCD,
Ethernet, RS485,
RS232, compact flash with UV protection for outdoor use
5.7” LCD
Monochrome touch
- Ethernet, RS485,
RS232
5.7” TFT 256 color touch - Ethernet,
RS485, RS232
8.4” TFT 256 color touch - Ethernet,
RS485, RS232
10.4” TFT 256 color touch - Ethernet,
RS485, RS232
15” TFT 32K color touch - Ethernet,
RS485, RS232
Width in mm
7.45
190
7.45
190
7.45
190
8.83
224
8.83
224
10.32
261
12.83
327
16
404
512 MB Industrial CF Memory
Height in mm
5.85
150
Depth in mm
2.1
52
5.85
150
5.85
150
7.08
178
7.08
178
8.18
208
9.5
242
13
330
2.1
52
2.1
52
2.3
58
2.3
58
2.2
66
2.2
56
2.8
71
CTVUE-CF1000 1 GB Industrial CF Memory
CTVUE-CONFIG-CD Free Programming Software CD
CTVUE-USB
CTVUE-EP-485-xxx*
Programming cable PC to CTVue
Cable from CTVue to Epsilon EP, Unidrive SP or Commander SK
CTVUE-MME-485-xxx* Cable from CTVue to EN-series, Epsilon, and MDS
CTVUE-DC-485-xxx* Cable from CTVue to Mentor II or Quantum III
CTVUE-MC-485-xxx* Cable from CTVue to MC Series
CTVUE-RS00
CTVUE-CN00
RS232 / RS485 Communications Option Card
CANOpen Communications Option Card
CTVUE-PBDP
CTVUE-DN00
Profibus-DP Communications Option Card
DeviceNet Communications Option Card
CTvue CONNECTIVITY AND FUNCTIONALITY
15” Graphic Color Touch
1024 x 768, TFT 32K colors
Ethernet Port, (2) RS485,
(2) RS232
Compact Flash Slot,
32 Mb onboard Flash
The CTVue color touchscreens are easy to setup and connect to your application.
Connection to the serial port
The operator interface is connected directly to the RJ45 connection on the serial port. RS485 is a multi-drop protocol and so may be connected to multiple drives if required.
RJ45-5
RS485
Unidrive
SP
FM’s Epsilon
EP
Commander
SK
Digitax
ST
Connecting via Ethernet
The Epsilon EP-P, or FM-3/4E and SM-Ethernet Option modules allow the operator interface to be connected to the drive using Modbus TCP/IP.
CTVUE SPECIFICATIONS
Power Input 24 VDC
ETH-S8
8 Port Switch
Temperature 0-50˚ Celsius
Environmental IP66 / NEMA 4X -
FOR USE IN HAZARDOUS LOCATIONS:
Class I, Division 2, Groups A, B, C, and D
Class II, Division 2, Groups F and G
Class III, Division 2
Operating Humidity 80% relative maximum from 0-50˚ Celsius
*Standard cable lengths are 5, 15, 25 ft (-005) (-015) (-025)
393
394 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
LED Keypads
The SM-Keypad, SP-Keypad and DST-Keypad are designed for use with Unidrive SP and Digitax ST. They have two rows of 7 segment LED displays. These keypads are very easy to read at a distance or in poor lighting conditions. The upper row shows the drive status or the current menu and parameter number. The lower row displays the parameter value or the specific trip type.
These optional keypads are ordered separately from the drives.
SM-Keypad - Unidrive SP (size 1-6)
The SM-Keypad was designed for use with the Unidrive SP sizes 1-6.
Order Code: SM-KEYPAD
LCD Keypads
SM-Keypad Plus, designed for use with Unidrive SP and Commander
SK (remote only), has a multilingual backlit LCD display with three lines of text. Line 1 shows drive status or current menu and parameter number plus parameter value or the specific trip. Lines 2 and 3 show the parameter name or the help text.
SM-Keypad Plus
There are five text databases as standard: French, Italian,
German, Spanish and English plus a custom database for application specific text. Help text is available at the press of a button. The parameter set that may be browsed can be filtered, to tailor a drive to a specific application or industry. With the standard communications cable and
Windows™ text string tool from Control Techniques, you can customize the human-machine interface of
SM-Keypad Plus to your own specific application, and make it your own.
CGP-Keypad
The CGP-Keypad is designed for use with the Commander GP20.
Order Code: CGP-KEYPAD-PLUS
SP-Keypad - Unidrive SP (size 0)
The SP-Keypad was designed for use with the Unidrive SP size Zero.
Order Code: KEYPAD-SP0
Commander GP20
Keypad
Unidrive SP size Zero
LED Keypad
DST-Keypad - Digitax ST
The DST-Keypad was designed for use with the Digitax-ST series servo drives.
Order Code: DST-KEYPAD
Digitax ST
LED Keypad
Parameter text may be customized using a Windows™ tool, for applications or further languages.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
AC and DC Drives
SOFTWARE INTERFACE SINGLE-DROP CABLES
Commander SX
RS232
CT-Comms-Cable
USB
CT-USB-Cable
MODE
▲
PAR
AME
TER DAT
PAR
AME TER
IND EX
Rea
Zero
forw
Brid
Brid
Curre ard nt lim
RES
SXSoft
Quantum III / Mentor II
RS232 port:
MOD
▲
PAR
AME TER
DAT
PAR AME
TER IND
EX
Drive
Zero
Brid
Brid
Curre
Rea
spe
reve ge 1 eed nt lim
RES
MOD
▲
PAR AME
TER DAT
PAR AME
TER IND
EX
Drive Re ady Zero s pee Run f orw Bridge
Bridge ard
Curre nt lim
RESE
CTD-PC-232-010 with MD29 / AN
SyPT Programming
PAR
AME
PAR
AME TER
IND
Drive o spee Alarm
Run
Ready
Run ward
Brid erse
At sp
limit
Mentor II
RS485 port:
CTD-PC-485-010
MOD
▲
PAR AME TER
DAT
PAR
AME TER
IND
Drive
forw
Rea
reve
At sp nt lim
MODE
▲
PAR AME
PAR AME
Alarm Drive Rea
Run f Zero spee
Bridge verse
At spe Bridge
SET
Commander SK
CTSoft
CTScope
SyPTLite
MOD
▲
PAR
AME TER
DAT
PAR AME
TER IND
EX
Drive
Zero
Brid
Brid
Curre
Rea
spe
reve ge 1 eed nt lim
RES
MO
▲
PAR
AME TER
DAT
PAR AME
IND
EX
Drive
Alarm
Zero s
Rea
Run f peed
Run r orw Bridg evers
Bridg
Curre nt limit
RES
MODE
▲
PAR
AME TER
DAT
PAR AME
IND
EX
Drive
Alarm
Zero
Rea
Run spee
for ward Run
Bridge reve
Curre nt lim
SET
Commander GP20
& Unidrive SP
Quantum III / Mentor II www.contro
s.com
CTSoft
CTScope
SyPTLite
SyPTPro with MD29 I AN
CT Browser
Direct to drive with MD29 I AN
MentorSoft
CTVUE-USB
CTVue
CT-Comms-Cable
RS232/485 serial interface cable; 6 ft.; DB9 female connector on computer end; RJ45 connector on drive end.
CTD-PC-485-010
Pseudo RS232/485 serial interface cable; labeled DB9 female connectors on both ends, 10 ft.
CT-USB-Cable
Connects the Modbus port on the drive directly to the
USB port of your PC. USB to RS485 conversion.
CTD-PC-232-010
RS232 serial interface cable; DB9 female connector on computer end; DB9-P male connector on drive end, 10 ft.
CTVUE-USB
CTVue USB programming cable. USB connectors on both ends.
395
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
AC and DC Drives
SOFTWARE INTERFACE MULTI-DROP CABLES
Commander SX and Commander SK Commander GP20
& Unidrive SP
DB9F-42-DB9F
RS232
USB
CT-Comms-Cable
RJ45-5
SP-LCD-485-xxx
CT-USB-Cable
Quantum III / Mentor II
MOD
▲
PAR AME
TER DAT
PAR AME
TER IND
Rea
Alarm
reve
At sp
RES
MOD
▲
PAR
AME TER
DAT
PAR AME TER
IND
Drive
Rea
spe
Run
At sp
Curre
RES
SXSoft CTSoft
SyPTLite
Quantum III / Mentor II
MOD
▲
PAR AME
PAR AME
Drive
Zero
Rea
At sp
reve
Curre nt limi
RES
MOD
▲
PAR
AME TER DAT
PAR
AME TER
IND
Drive
Zero
forw
reve
Curre
Rea
spe nt lim
RES www.contro
ltechniques.
com
CTSoft
CTScope
SyPTLite
SyPTPro
MD29 / AN
MentorSoft
CT Browser
MD29 / AN
MentorSoft
CT Browser
CTD-PCM-485-XXX
DB9F-Term
CTD-MDP-485-xxx
Commander SX and Commander SK Commander GP20
& Unidrive SP
CTD-RJM-485-XXX
SXSoft CTSoft
CTScope
SyPTLite www.contro
com
CTSoft
CTScope
SyPT
SyPTLite
396
SP-LCD-485-xxx
RS485 multi-drop cable with RJ45 connectors on both ends.
CTD-PCM-485-xxx
RS485 cable for PC to DB9F-Terminal . Connects to
DB9F-42-DB9F at PC end.
CT-Comms-Cable
Connects the RJ45 Modbus port on the drive to the DB9
RS232/485 Serial port on your PC.
CT-USB-Cable
Connects the RJ45 Modbus port on the drive to the USB port on your PC. Includes USB to RS485 conversion.
CTD-MDP-485-xxx
RS485 cable for DB9F-Term to CTD connection.
CTD-RJM-485-xxx
RS485 cable for DB9F-Term to RJ45 connection.
XXX = length in feet
-005 = 5 ft.; -010 = 10 ft.; -015 = 15 ft.; -025 = 25 ft.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
AC, DC and Servo Drives
OPERATOR INTERFACE SINGLE-DROP CABLES
Commander SX
RS485 port:
CTVue
Commander SK
Unidrive SP &
Commander GP20 Digitax ST Epsilon EP www.contro
ltechnique s.com
CTVUE-EP-485-XXX*
MO
▲
PAR AME
TER
DAT
PAR AME
TER IND
EX
Drive
Alarm
Run
Run
Brid
At sp
Rea
spe
reve ge 1 ge 2 nt lim ard
RES
CTVue
CTVUE-DC-485-XXX*
Quantum III / Mentor II
MOD
▲
PAR AME
TER DAT
PAR
AME TER
EX
Drive
Zero
Run
Brid
At sp
Curre
Rea
spe
reve ge 2 eed
RES
MODE
▲
PAR
AME TER
DAT
PAR
AME TER
IND EX
Alar eady
Zero spe
Curre n forw dge 1 dge 2 nt lim ard
SET
Direct to drive with MD29 / AN
CTVue
MC206X MC244
CTVUE-MC-485-XXX*
SK-Keypad
Remote
SM-Keypad
Plus
SP-LCD-485-XXX
Commander SX
SM-Keypad Plus only
Commander SK Unidrive SP & Commander GP20
SM-Keypad Plus only www.contro
s.com
CTVue
CTVUE-EP-485-XXX
RS485 cable, RJ45 to RJ45
CTVUE-DC-485-XXX
RS485 cable; 9pin to RJ45 connector
CTVUE-MC-485-XXX
RS485 cable; Din8 to RJ45 connector
CTVUE-MME-485-XXX*
EN
EN-204
VDC 10-30 INPUT OUTPUT
MDS Epsilon
Ei-202
J2
J3
J5 J6
* External 24 VDC power supply required.
SP-LCD-485-XXX
RS485 cable with RJ45 connector on both ends for LCD Keypad and
Unidrive SP.
CTVUE-MME-485-XXX
RS485 cable; 9pin to RJ45 connector
XXX = length in feet
-005 = 5 ft.; -010 = 10 ft.; -015 = 15 ft.; -025 = 25 ft.
397
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
AC, DC and Servo Drives
OPERATOR INTERFACE MULTI-DROP CABLES
Commander SX Commander SK
CTVue
CTVUE-EP-485-XXX RJ45-5 SP-LCD-485-XXX
Direct to Drive
Unidrive SP &
Commander GP20
Digitax ST www.contro
com
CTVue
Unidrive SP &
Commander GP20
SM-Ethernet www.contro
ltechniques.
com
Digitax ST
SM-Ethernet
Commander SK
SM-Ethernet
FM3E FM4E Epsilon EP-P
ETH-PATCH-XXX
ETH-S8
(8 Port Switch) or
ETH-S16
(16 Port Switch)
ETH-PATCH-XXX
P296
FM-3
E
4
5
1
2
7
8
3
4
1
2
+
FM-4
E
4
5
1
2
7
8
3
4
1
2
+
MC206X
P296
MC244
398
CTVUE-EP-485-XXX
RJ45 to RJ45, RS485 cable
SP-LCD-485-XXX
RS485 cable for multidrop. RJ45 connector on both ends.
ETH-PATCH-XXX
RS485 multidrop cable. Wires dressed at both ends.
XXX = length in feet
-005 = 5 ft.; -015 = 15 ft.; -025 = 25 ft.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
AC and DC Drives
I/O BOX CABLES
I/O Box
I/O
M
OD
UL
E RB-CTD-485-XXX
Quantum III / Mentor II
MOD
▲
PAR
AME TER DAT
PAR
AME TER
IND
Drive
Rea
spe
reve
Curre nt lim
RES
MOD
▲
PAR
AME TER DAT
AME
TER IND EX
Drive
Zero
Run
Run
Brid
Curre
Rea
spe
reve ge 2 nt lim
RES
With MD29 / AN
(PL1 connector)
I/O Box
I/O
M
OD
UL
E RB-MDP-485-XXX
Unidrive SP Quantum III / Mentor II
MOD
▲
PAR
AME TER
DAT
PAR AME TER
IND
Drive
Zero
Run
Run
Brid
Rea
spe ge 1 ge 2
Curre nt lim
RES
MOD
▲
PAR
AME TER
DAT
PAR AME
TER IND
EX
Drive
Zero
Rea
Run
forw
At sp
Curre eed
RES www.contro
ltechniques.
com
With SM-Applications Plus
With MD29
(TB1 connector)
RB-CTD-485-XXX
RS485 cable dressed at I/O Box end, DB9-D male connector at drive end.
RB-MDP-485-XXX
RS485 multidrop cable dressed at I/O Box end and drive end.
XXX = length in feet
-005 = 5 ft.; -015 = 15 ft.; -025 = 25 ft.
CONNECTORS
DB9F–Term
RS485 network connector; DB9 female connector with terminal strip on cable end.
DB9M-2I-DB9F
RS232 optical isolator; DB9 female connector on computer end; DB9 male connector on cable end. No power supply needed in most applications.
DB9M-2I-DB9F-D
For Desktop computers only, the RS-232 optical isolator; DB9 female connector on computer end; DB9 male connector on cable end.
DB9F-42-DB9F
RS232/485 adaptor; DB9 female connector on RS485 end; DB9 female connector on RS232 end.
RJ45-5
RJ45 Splitter; accepts one RJ45 connector of input and 4 RJ45 connectors for output.
399
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
Epsilon EP
400
CTVUE-303L,
-303M, -306A,
-306C, -308A, or -310C
CTVUE HMI to Drive
CTVUE-EP-485-xxx
Drive RS485 to Drive RS485
DDC-RJ45-xxx
Windows 98, NT 4.0, 2000
XP (32-bit) or Vista (32-bit)
Compatible Computer
(Customer Supplied)
PC RS232 to Drive RS485
Serial Interface Cable, CT-COMMS
PC USB Port to Drive RS485
Serial Interface Cable
CT-USB-CABLE
Ethernet to Drive,
ETH-PATCH--xxx
CT-MME-POWER-CD
Contains PowerTools Pro
Ethernet 8-port Switch,
ETH-S8
Epsilon EP I/O Cable,
EIO26-xxx
STI-24IO act link
Epsilon EP reset
L1
L2
PE
R
S
T
3 MIN
EP204-P00-0000
9606XX-XX A1
SN 0610E014
J5 J10
EP204-IDN-EN00
9606XX-XX A1
SN 0610E014
J6
Drive Sync Out
Breakout Board,
STI-SNCOA
J8
Drive Sync Out to
Drive Sync In Cable,
SNCDD-915-xxx
Drive Sync Out Cable,
SNCFLOA-xxx
Drive Sync Out to
FM-3/4 Module In Cable,
SNCMD-815-xxx
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
Braking Resistor,
SM-Heatsink DBR1
Drive Brake Relay
BRM-1
Motor Power Cable
XTMDS-xxx*
Motor Brake Cable
XTBMS-xxx*
Motor Feedback Cable
XUFTS-xxx*
Motor Power ( +Brake ) Cable
XCMDS-xxx or XCMDBS-xxx*
40, 60, 80 mm
XV Motors
130 mm XV Motors
Motor Feedback Cable
XUFCS-xxx*
Motor Power Cable
CMDS-xxx or CMMS-xxx*
Motor Brake Cable
CBMS-xxx*
NT Motors
Motor Feedback Cable
UFCS-xxx*
FM Motors
Motor Power Cable
PSBAA-xxx, PBBAA-xxx**
Motor Feedback
SIBAA-xxx**
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
Drive Sync In to Drive Sync Out Cable,
SNCDD-915-xxx
Drive Sync In Cable,
SNCFLI-xxx
Motor Feedback Breakout Board,
STI-ENC
1 2 3 4
5 6 7 8
Drive Sync In from
FM-3/4 Module Out Cable,
SNCMD-89-xxx
Drive Sync In Breakout Board,
STI-SNCI
Master
Synchronization
Encoder SCSLD
Cable Notes
* Flex duty versions available
** Flex duty cable
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
Digitax ST
LED Keypad,
DST-KEYPAD Data Storage
DST-SMARTCARD
Internal
Braking Resistor,
SM-Heatsink DBR0
Drive Brake Relay
BRM-1
CTVue-303L, 303M,
306A, 306C,
308A, 310C
CTVue HMI to Drive
CTVUE-EP-485-xxx
Windows 98, NT 4.0, 2000,
XP or Vista 32
Compatible Computer
(Customer Supplied)
PC RS232 to Drive RS485
Serial Interface Cable
CT-COMMS CABLE
PC USB Port to Drive RS485
Serial Interface Cable
CT-USB-CABLE
Digitax ST CD,
CT-EZMotion-CD, or CT-MME-POWER-CD with PowerTools Pro
Master
Synchronization
Encoder
SCSLD
Ethernet to SM-Ethernet
ETH-PATCH-xxx***
Drive Encoder Output to
SM-Encoder Plus Input
SNC-DST-SM-xxx
SM-Encoder Plus Output to
SM-Encoder Plus Input
SNC-SM-SM-xxx
SCSLD Encoder to
SM-Encoder Plus Input
SNC-ENC-SM-xxx
Motor Power Cable
XTMDS-xxx*
Motor Brake Cable
XTBMS-xxx*
Motor Feedback Cable
XUFTS-xxx*
Motor Power ( +Brake ) Cable
XCMDS-xxx or XCMDBS-xxx*
Motor Feedback Cable
XUFCS-xxx*
Motor Power Cable
CMDS-xxx or CMMS-xxx*
Motor Brake Cable
CBMS-xxx*
40, 60, 80 mm
XV Motors
130 mm XV Motors
NT Motors
Motor Feedback Cable
UFCS-xxx*
FM Motors
Motor Power Cable
PSBAA-xxx, PBBAA-xxx**
Motor Feedback
SIBAA-xxx**
Cable Notes
* Flex duty versions available
** Flex duty cable
*** Requires SM-Ethernet module
SM Option Modules 1
Communications 2
SM-Ethernet
SM-DeviceNet
SM-Profibus-DP
SM-SERCOS
SM-CANopen
SM-CAN
SM-EtherCAT
I/O
SM-I/O Plus
SM-I/O 120V
SM-I/O 32
SM-I/O 24V
SM- I/O Timer
Feedback
3
SM-Encoder Plus
SM-Resolver
Co-processors
SM-Applications Lite V2
SM-Applications Plus
SM-EZMotion
Motor Feedback Breakout Board,
SM-ETC
EMC Filters
230V 1Ø = 4200-6000
230V 3Ø = 4200-6001
460V 3Ø = 4200-6002
1 Digitax ST models can accommodate up to two (2) SM option modules.
2 Modbus RTU is standard. SM Ethernet conforms to both
EtherNet/IP and Modbus TCP/IP protocols.
3 The drive supports 14 feedback device types as standard via encoder input.
401
402 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
Motion Control
CTVue CTVue-MME-485
Epsilon
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Interconnect Components
Motion Control
403
404 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Set Up & Configuration Software
CT-Comms-Cable
CT-USB-Cable Unidrive SP Digitax ST
CT Soft
Parameter
Setup SM-Ethernet
ETH-PATCH-xxx
Commander SK
SM-Applications Lite V2
CT-Comms-Cable
CT-USB-Cable
CT-Comms-Cable
CT-USB-Cable
SM-Applications Plus
SM-EZMotion SM-Ethernet
CT-Comms-Cable
CT-USB-Cable
ETH-PATCH-xxx
CT-Comms-Cable
CT-USB-Cable
SM-Ethernet
ETH-PATCH-xxx
Lite
Parameter
Setup and
PLC
Advanced
PLC
PowerTools
Pro
Drag and Drop
Setup
CT Soft
Parameter
Setup
Commander SX
Logic Stick CT-Comms-Cable
CT-USB-Cable Lite
Parameter
Setup and
PLC
CT-Comms-Cable
CT-USB-Cable SX Soft
Parameter
Setup
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Epsilon EP
J8
Epsilon EP reset
L1
L2
PE
R
S
T act link
3 MIN
ETH-S4
CT-Comms-Cable
CT-USB-Cable
ETH-PATCH-xxx
PowerTools
Pro
Base,
Indexing and
Programmable
Applications
J5 J10
EP204-P00-0000
9606XX-XX A1
SN 0610E014
J6
MO
DE
▲
▲
PAR
AME
TER
DAT
A
PAR
AME
TER
IND
EX
Drive
Alarm
Run
Run
Ready peed
forw
reve
1 ard rse
Bridge
Curren
2 t limi
RES
ET
Mentor II
MODE
▲
▲
PAR
AME
TER
DAT
A
PAR
AME
TER
IND
EX
Drive
Alarm
Zero
Rea dy
Run spe ed
Ru n reve
Brid ge
Brid ge
At sp eed ard rse
Curre nt lim it
RE
SET
J2
T
J3
Epsilon
Ei-202
J5 J6
EN
MDS
FM-3/4 (DN, PB, E)
FM-3/4 E
TIA-xxx
PowerTools
FM
Base and
Indexing
Applications
TIA-xxx
ETH-PATCH-xxx
PowerTools
Pro
Advanced
Programming
MD29
CTD-PC-485
CTD-PC-232-xxx
MentorSoft
Parameter
Setup
Advanced
PLC
405
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
Cables & Accessories
Motion Control
Control Techniques builds its cables to the highest standards. Drives are engineered so that connections are easily accessible and, in many cases, no wiring is involved, simply plug and play.
Product Group (or Accessory Name)
CABLE OR ACCESSORY ILLUSTRATION
800-893-2321
Cable length in feet, = Custom lengths available
Text description of cable or accessory
Product that uses Cable or Accessory in Green.
Connections are read left to right based on illustration.
MC-CEP
Command Cables
CMDX
-002, -004, -010
Command cable required to connect Epsilon EP with
MC Controllers. 45° angle connectors on drive end.
Epsilon EP, Unidrive SP, Digitax ST to MC Controllers
-003, -005, -015
Command cable; 18 pair; DB44M straight connectors on both ends.
EN, Epsilon, MDS to ECI-44
CMDO
Bulk Command Cables
13PX26SS
Command cable 13 pair, 26 AWG w/shield; 0.380“
(9.7 mm) diameter.
DB44P-SA
-005, -015
Command cable to position controller; 18 pair; DB44M straight connector on drive end; pigtails on other end for screw terminals.
EN, Epsilon, MDS to Position Controller, PLC
18PX26SS
Command cable 18 pair, 26 AWG w/shield; 0.410“
(10.4 mm) diameter
DB44P-SA
Serial Interface Cables
CDRO TIA
406
-005, -010.-015
Command cable to position controller; 13 pair; 45° angle connector at drive (DB44M) pigtails on other end for screw terminals.
EN, Epsilon, MDS to Position Controller, PLC
-010, -025, -050
RS232 serial interface cable; DB9-S straight molded connector on computer end; DB9-P straight molded connector on drive end.
EN, Epsilon, MDS to PC, HMI, PLC (Modbus Master)
MC-CEN CO485
-002, -004, -010
Command cable required to connect drives with MC
Controllers. 45° angle connectors on drive end.
EN, Epsilon, MDS to MC Controllers
-010, -025, -050
RS485 serial interface cable;DB9-P straight, molded connector on drive end and flying leads on computer end. Black PVC outer jacket.
EN, Epsilon, MDS to PC, HMI, PLC (Modbus Master)
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Serial Interface Cables (continued)
CT-COMMS
Connects the 9 pin RS232 serial port of a PC to the RJ45 port of the drive. RS232 to RS-485 conversion.
Epsilon EP, Unidrive SP, Digitax ST to PC
CT-USB
Connects the Modbus port on the drive directly to the
USB port of your PC. USB to RS485 conversion.
Epsilon EP, Unidrive SP, Digitax ST to PC
DDS
DB26P-SS
For feedback cable; DB26 pin male; straight cable outlet; metallized plastic backshell.
DB26P-SA
For feedback cable; DB26 pin male; 45° cable outlet; metallized plastic backshell.
-001, -005, -010, -020
Standard multi-drop drive to drive serial interface cable.
Use with TERM-H and TERM-T termination plugs at both ends if total multi-drop serial cable length is greater than
50 feet.
EN, Epsilon, MDS to EN, MDS
TERM H
Connectors for Command Cables
DB44P-SA
For command cable; DB44 pin male; 45° cable outlet; metallized plastic backshell.
Connectors for Serial Interface
DB9P-SS
For serial cable; DB9 pin male; straight cable outlet; metallized plastic backshell.
DB9P-SA
For serial cable; DB9 pin male; 45° cable outlet; metallized plastic backshell.
Motor Power Cables (NT, MG, MH)
Terminator block for head of serial string.
EN, Epsilon, MDS
TERM T
CMDS
Terminator block for tail of serial string.
EN, Epsilon, MDS
-005, -015, -025, -050, -100
16 AWG for 2” and 3” motors, connector on motor end, ferrules on drive end. Fully shielded with IP-65 molded connector.
NT, MG, MH Motor Connector
CMMS
Digital I/O Interface Cable
EIO26-xxx
-005, -010, -015
I/O interface cable provides access to all digital I/O points while maintaining 6“ drive installation depth.
Epsilon, Epsilon EP to Position Controller, PLC
-005, -015, -025, -050, -100
12 AWG for 4” and 6” motors, connector on motor end, ferrules on drive end. Fully shielded with IP-65 molded connector.
MG, MH Motor Connector
CMLS
-015, 025, -050, -100
8 AWG for 8” motors, connector on motor end, ferrules on drive end. Fully shielded with IP-65 molded connector.
MDS to MH Motor Connector
407
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Motor Power Extension Cable
CMDCS
CFCO
Cable to be connected to bulkhead connector on one
end and motor connector on the other end for 2” and
3” motors.
PTB-16-8 to NT, MG, MH
-005, -015, -025, -050, -100
Motor feedback cable, connector at drive only (use
PTO6A-16-23SSR for motor feedback.
EN, Epsilon, MDS to PT06A-16-23SSR
CFOS
Bulk Power Cables & Connectors
4X16SS
-005, -015, -025, -050, -100
Motor feedback cable, connector at motor only.
DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG,
MH
Motor power cable for 2” and 3” motors, 4-wire,
16 AWG w/shield; 0.380” (9.7 mm) diameter.
EN, Epsilon, MDS to PT06A-16-8SSR
4X12SS
Motor power cable for 4” and 6” motors, 4-wire
12AWG w/shield; 0.440’ (11.2 mm) diameter.
EN, MDS to MS3106A-20-15SSR
PT06A-16-8SSR
Motor power connector for 2” & 3” NT, MG,
MH motors, female, not IP-65, not shielded.
MS3106A-20-15SSR
Motor power connector for 4” & 6” NT, MG,
MH motors, female, not IP-65, not shielded.
Consult Factory for options regarding Bulk
Power Cable and connectors for 8” motors.
Feedback Cables (NT, MG, MH)
UFCS
Feedback Extension Cable (NT, MG, MH)
CFOCS
Cable to be connected to bulkhead connector on end and motor connector on the other end (2”, 3”, 4”, 6” and 8” motors).
PTB-16-23 to NT, MG, MH
Bulk Feedback Cables & Connectors
(NT, MG, MH)
MGFS
PTB-16-8
Motor bulkhead connector for 2” and 3” motors.
-005, -015, -025, -050, -100
Motor feedback cable, connector both ends.
Epsilon EP, Unidrive SP to NT, MG, MH
CFCS
Standard duty motor feedback cable for 2” and 3” motors, 8 pair w/shield.
DB26P-SS, DB26P-SA to PT06A-16-23-SSR
PT06A-16-23SSR
Female connector for motor feedback cable, not IP-65, not shielded.
NT, MG, MH Feedback Connector
PT06E-16-23PWS
Male connector for standard motor feedback cable, use at enclosure end w/PTB-16-23, IP-65, shielded.
NT, MG, MH Feedback Connector
PTB-16-23
Through the wall bulkhead connector for feedback cables.
408
-005, -015, -025, -050, -100
Motor feedback cable, connector both ends.
EN, Epsilon, MDS to NT, MG, MH, PTB-16-23
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Brake Cables (NT, MG, MH)
CBMS
CMLF
-005, -015, -025, -050, -100
Motor brake cable, molded standard duty, connector at motor only.
BRM-1 to NT, MG, MH
-005, -015, -025
Molded flex motor power cable, connector at motor end for 8” motors. Min. Bend radius 9 in. for flexing, 6” for stationary. Min. Bend radius 9.2 in. for flexing, 6” for stationary.
MH Motor Connector
Brake Extension Cable (NT, MG, MH)
CBMCS
Flex Power Extension Cables (NT, MG, MH)
CMDEF
Cable to be connected to bulkhead connector on one end and motor connector on the other end.
PTB-8-3 to NT, MG, MH
Motor Connectors for Brake Cables
(NT, MG, MH)
PT06A-8-3SSR
Motor brake connector kit.
-005, -015, -025
Molded flex motor power extension cable, connectors at both ends for 2” & 3” motors. Min. Bend radius 5.6 in.
CMDS to NT, MG, MH
CMMEF
Bulkhead Connectors for Brake Cables
PTB-8-3
Brake bulkhead connector.
-005, -015, -025
Molded flex motor power extension cable, connectors at both ends for 4” and 6” motors. Min. Bend radius 9.0 in. for flexing, 6” for stationary.
CMMS to MG, MH
CMDCF
Flex Power Cables (NT, MG, MH)
Note: All Flex Cables are rated for 9,000,000 cycles when installation recommendations are followed. See Flex Cable Installation Manual.
CMDF
-005, -015, -025
Molded flex motor power cable to be connected to bulkhead on one end and motor connector on the other end for 2” and 3” motors. Min. Bend radius 5.6 in.
PTB-16-8 to NT, MG, MH
Bulk Flex Power Cables & Connectors (NT, MG, MH)
-005, -015, -025
Molded flex motor power cable, connector at motor end for 2” and 3” motors. Min. Bend radius 5.6 in.
NT, MG, MH Motor Connector
CMMF
Molded flex motor power cable, connector at motor flexing, 6” for stationary.
NT, MG, MH Motor Connector
-005, -015, -025 end for 4” and 6” motors. Min. Bend radius 9.0 in. for
4X16SF 20 ft. min.
Flex duty motor power cable for 2” and 3” motors, 4 wire, 16AWG, w/shield. Min. Bend radius 5.6 in.
EN, Epsilon, MDS to PT06A-16-8SWSF
4X12SF 20 ft. min.
Flex duty motor power cable for 4” and 6” motors, 4 wire, 12AWG, w/shield. Min. Bend radius 9.0 in.
EN, MDS to MS3106A-20-15PWSF
4X08SF 20 ft. min.
Flex duty motor power cable for 8” motors, 4 wire,
8AWG, w/shield. Min. Bend radius 9.2 in. for flexing
MDS to MH
409
410 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Bulk Flex Power Cables & Connectors
(NT, MG, MH) (continued)
Bulk Flex Feedback Cable
MGFF
PT06E-16-8SWSF
Motor end power cable, female, w/backshell,
IP-65, shielded for 2” and 3” motors.
PT01E-16-8PWSF
Power Cable extension, male, mates with motor end of motor cable, IP-65, shielded, for 2” and 3” motors.
MS3106A-20-15SWSF
4” motor power connector, female, not
IP-65, not shielded.
MS3101A-20-15PWSF
Power cable extension plug for 4” motors, male. Mates with motor end of motor cable
20 ft. min.
Flex duty motor feedback cable for 2” and 3” motors,
8 pair w/shield. Min. Bend radius 5.6 in. for flexing, 6” for stationary.
PT01A-16-23SSR to NT, MG, MH
Flex Brake Cable (NT, MG, MH)
CBMF
-005, -015, -025, -050, -100
Motor brake cable, flex duty, connector at drive, leads at motor, IP-65 for 2”, 3”, 4”, 6” motors.
Min. bend radius 3 in.
BRM-1 to NT, MG, MH Brake Motor Connector
Flex Feedback Extension Cables (NT, MG, MH)
CFEF
-005, -015, -025
Molded flex motor feedback extension cable for all encoder feedback motors w/circular connectors at both ends. Min. Bend radius 5.6 in. for flexing, 6” for stationary.
NT, MG, MH to CFCS, CFOS
CFOF
Connectors for Brake Cables
PT06E-16-23PWSF
Enclosure end feedback plug, male, w/ backshell and lock ring, IP-65, shielded.
PT01E-16-23PWSF
Feedback cable extension, female, mates w/motor end of the motor feedback cable,
IP-65, shielded.
5 ft. min.
Motor feedback cable, connector at motor only. Min.
Bend radius 5.6 in. for flexing, 6” for stationary.
DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG, MH
CFCF
-005, -015, -025
Molded flex motor feedback cable for mating w/ through the wall bulkhead connector for all encoder feedback motors. Min. Bend radius 5.6 in. for flexing, 6” for stationary.
PTB-16-23 to NT, MG, MH
Through Wall Grommets with Shield
CGS-047
Cable grommet, 0.197-0.472 ID.
ENCO, CMDS, CFOS, MGFS, CMDF,
4X16SF/SS
CGS-069
Cable grommet, 0.433-0.689 ID.
4X12SF/SS, CMMS, CMDO, MGFS, CDRO, CMMF,
CFCF, CFOF-A, MGFF
CGS-098
Cable grommet, 0.630-0.984 ID.
CMLS
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
XV Motor Cables
XTMDS
Note: All Flex Cables are rated for 9,000,000 cycles when installation recommendations are followed. See Flex Cable Installation Manual.
-005, -015, -025, -050, -100
Motor power cable.
XV, 40, 60, 80 mm brake motors
XCMDS
Motor power cable.
XV 130 mm motors
XCMDBS
XV Flex Cables
XTMDEF
-005, -015, -025
-005, -015, -025
Flex motor power cable extension. For use with XTMDS.
Min. Bend radius 5.6 in.
XV 40, 60, 80 mm motors
XCMDEF
Motor power and brake cable.
XV 130 mm brake motors
XTBMS
-005, -015, -025
-005, -015, -025
Flex motor power cable extension. For use with XCMDS.
Min. Bend radius 5.6 in.
XV 130 mm motors
XCMDBEF
-005, -015, -025, -050, -100
Motor brake cable, standard duty, connector at motor only.
BRM-1 to XV 40, 60, 80 mm brake motors
-005, -015, -025
Flex motor brake cable extension. For use with XCMDBS.
Min. Bend radius 5.6 in.
XV 130 mm brake motors
XUFTEF
XV Motor Feedback Cables
XUFTS
-005, -015, -025
Flex motor feedback extension cable for use with XEFTS cable. Min. Bend radius 5.6 in.
XV 40, 60, 80 mm motors
-005, -015, -025, -050, -100
XV 40, 60, 80 mm motor to DSUB connector on drive end. Feedback cable, 15 pin high density socket.
Epsilon EP, Unidrive SP to 40, 60, 80 mm XV motors
XUFCS
XTBMEF
-005, -015, -025, -050, -100
XV Motor Feedback cable.
Epsilon EP, Unidrive SP to XV 130 mm motor
-005, -015, -025, -050, -100
Flex duty motor brake cable for use with XTMBS cable.
Min. bend radius 3 in.
XV, 40, 60, 80 mm brake motors
XUFCEF
-005, -015, -025
Molded flex motor feedback extension cable for use with
XEFCS cable. Min. Bend radius 5.6 in.
XV 130 mm motors
411
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Motor Power Cables (FM, EZ, UM)
PSBAA (55 to 142 Frame Size)
PSBAK, PSBBK and PSBCK (190 Frame Size)
(meters) -003, -005, -010, -015, -020
Flex Rated Min. Bend radius 4.75 in
Power and Brake Cable (FM, EZ, UM)
PBBAA (55 to 142 Frame Size)
PBBAK, PBBBK and PBBCK (190 Frame Size)
(meters) -003, -005, -010, -015, -020
Flex Rated Min. Bend radius 4.75 in
Feedback Cable (FM, EZ, UM)
SIBAH
EN, MDS
SIBAA
(meters) -003, -005, -010, -015, -020
Flex Rated Min. Bend radius 4.75 in
(meters) -003, -005, -010, -015, -020
Flex Rated Min. Bend radius 4.75 in
Epsilon EP, Unidrive SP, Digitax ST
Master Synchronization Cable
SNCDD-915-xxx
SNCMD-89-xxx
Drive Sync In from FM-3/4 Module Sync Out Cable.
-001.5
Epsilon EP to FM-3/4
SNCI
-003
Sync in cable, DB9S – 8 pin mini-DIN.
FM-3/4 to SNCE, SNCO
SNCO
-003
Sync out cable, DB9P – 7 pin mini-DIN.
FM-3/4 to SNCI
SNCDD
-001.5
Sync in/out cable, 7 pin mini-DIN, 8 pin mini-DIN, for use between to FM-3/4 modules.
FM-3/4 to FM-3/4
SNCLI
-003
Sync in cable, Bare leads to 8 pin mini-DIN for use from
ECI-44 terminal block to the FM-3/4 sync in.
FM-3/4 to PLC, Master Encoder, User Device
SNCLO
-003
Sync out cable, 7 pin mini-DIN.
FM-3/4 to PLC, User Device
SNCE
Drive Sync Out to Drive Sync In Cable.
Epsilon EP to Epsilon EP
SNCFLOA-xxx
-003 -015, -025, -050
Sync cable to SNCI, Encoder connector to D9P connector.
SCSLD (-4, -4R, -3, -3R) to SNCI, or Epsilon EP Sync In
SNC-ENC-SM
412
Drive Sync Out Cable to Flying Leads.
Epsilon EP
SNCMD-815-xxx
-003
-015, -025, -050
Sync cable to Universal Encoder Plus, Encoder connector to D15P connector.
SCSLD (-4, -4R, -3, -3R) to Universal Encoder Plus
Drive Sync Out to FM-3/4 Module Sync In Cable.
Epsilon EP to FM-3/4
SNCFLI-xxx
-001.5
Drive Sync In Cable.
Epsilon EP, STI-SNCOA Breakout Board
Encoder Feedback Cable (AC motors)
VUFCS & ENCO
-003
-015, -025, -050, -075, -100
AC Motor Encoder Feedback Cable,
VUFCS (M12) connector or ENCO (M10) connector on motor end to DB15 connector on drive end.
Unidrive SP
1 2 3 4 5 6 7
Drive Sync In Breakout Board, STI-SNCI
Drive Sync Out Breakout Board, STI-SNCO efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Encoders
SCSLD-4
Master Synchronization Encoder,
3000 Line (12,000 counts per line) with right angle connection. Other line count encoders are available:
SCSLD-3R (2,500 line) and SCSLD-2R (1,000 line)
SNCE
SCSLD-4R
Same SCSLD-4 with right angle connector.
SNCE
Brake Relay
BRM-1
Brake relay module, 24V 1 contact,
6 Amp, DIN rail mounting.
EP, EN, Epsilon, MDS to
Motor/Brake Cable Brake Leads
Digital I/O Boards
DEMO-FMIO-000
Demo board to plug on FM-3/FM-4 to use digital I/O.
FM-3/4
Interface Terminals
STI-EIO
Screw Terminal Interface, breakout board plugs directly into Epsilon drive I/O connector (J3), 13 input and 7 output lines are labeled and LEDs for easy field wiring and troubleshooting.
Epsilon, Epsilon EP
DEMO-DRIO-000
Demo board to plug on EN or MDS to use digital I/O.
EN, MDS
Diagnostic Cable
ECI-44
External connection interface terminal strip; provides a convenient field wire Drive Sync Out Breakout Board, STI-SNCO screw terminal strip for all connections available on the drive’s command connector. Requires a
CMDX to connect to the drive. Includes labeled terminals and provisions for DIN rail mounting.
EN, Epsilon, MDS
Drive Sync In Breakout Board, STI-SNCI
DGNE
Diagnostic analog output connection cable provides a convenient method of connecting test equipment such the drive.
EN, MDS Epsilon to Oscilloscope, Meter
STI-SNCOA
Drive Sync Out and Analog In/Out
1 2 3 4 5 6 7
Breakout Board. DB9S
Epsilon EP
STI-SNCI
Drive Sync In Breakout Board. DB9S
Epsilon EP
1 2 3 4 5 6 7
1 2 3 4
5 6 7 8
Motor Feedback Breakout Board, STI-ENC
Logic and I/O Power Supplies
Drive Sync In Breakout Board,
MLP-002-00
2.1 Amp, +24 VDC, universal input
90 to 264 VAC.
EN, Epsilon, MDS
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
STI-ENC
Motor Feedback Breakout Board. DB15S
Epsilon EP
MLP-005-00
5 Amp, +24 VDC, universal input
90 to 264 VAC.
EN, Epsilon, MDS, Unidrive SP size 6
STI-24IO
Screw Terminal Interface, breakout board plugs directly into Epsilon EP drive I/O connector (J3), 16 input and 8 output lines are labeled and LEDs for easy field wiring and troubleshooting.
Epsilon EP
MLP-010-00
10 Amp, +24 VDC, universal input 90 to 264 VAC.
EN, Epsilon, MDS, Unidrive SP size 6
STI-24IO
Motor Feedback Breakout Board, STI-ENC
413
Epsilon EP I/O Cable,
EIO26-xxx
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
Motor Feedback Breakout Board,
STI-ENC
Motor Feedback Breakout Board, STI-ENC
414 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Logic and I/O Power Supplies Continued
ALP-130
30 Watt auxiliary logic backup power supply, supports one drive. (140 VDC output, 120-240 VAC input.)
EN
ALP-130
ALP-430
MP-5000
4x20 Watt auxiliary logic backup power supply, supports four drives. (140 VDC output,
120-240 VAC input.)
EN
AC Line Filters
960304-01
3Ø, 16 Amp, 240 VAC.
EN-214
960305-01
1Ø, 16 Amp, 240 VAC.
EN-204, EN-208
960307-01
1Ø, 10 Amp, 240 VAC.
MF-1250-20
3Ø, 20 Amp, 480 VAC
MP-1250
MF-2500-35
3Ø, 35 Amp, 480 VAC
MP-2500
MF-5000-65
3Ø, 65 Amp, 480 VAC
MP-5000
AC Line Reactor
See the following AC and DC Line Reactor pages for details and order codes
MLR-2580-0 0
0.25 mH, 80 amp, 3Ø
MP-5000 (Consult Factory for AC Line Reactors for the
MP-1250 and MP-2500)
Motor Power Filter
For long lead lengths.
MPF-002-00 Used with 2”, 3”, 4” and 6” motors
MPF-003-00Used with 8” motors
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Power Accessories
For AC and DC Drives
DyNAMIC BRAKING (DB) RESISTORS
The DC bus voltage level of a drive increases while the motor is re-generating, i.e. ramping to a stop.
Dynamic braking resistors provide a means of rapidly stopping a rotating motor and load while maintaining an acceptable bus voltage level. The mechanical energy stored in the spinning mass is converted into electrical energy and quickly dissipated as heat through a resistor.
Control Techniques offers resistor kits available for both
AC and DC drives.
Dynamic Braking for DC Drives
DC drives provide an exponential stopping profile when a dynamic brake resistor is applied across the motor’s armature circuit (when the motor acts as a DC generator). This type of braking can occur only when the drive is configured for coast stop and power has been removed from the motor (stop commanded). To apply a dynamic brake resistor to a DC drive, a motor contactor with a DB pole is required. This motor contactor is standard on Quantum III DC drives up through 250 hp.
Regen to line is also a preferred way to handle dynamic braking and is an option on Fincor 2230, Mentor II and
Quantum III DC drives.
Control Techniques offers two types of dynamic braking kits for AC Drives. The E-stop duty kits provide a means of quickly stopping a motor / load as well as providing the ability to dissipate energy created by either a change in motor speed or a line transient.
The cyclic duty kits are intended for more severe applications that need the capability to dissipate regenerated energy on a more continuous or repetitive basis such as indexers, feeders and dynamometers.
E-STOP DUTy
E-stop duty DB resistors are designed for non-cyclic use where energy dissipation from an active drive is required.
Resistors are supplied with mounting hardware unless otherwise noted.
These kits are designed to meet or exceed NEMA standard 7-15-1970, which states “DB resistors will not exceed their rated temperature rise when the drive is braked from maximum speed to standstill three times in rapid succession with a load inertia equal to or less than the motor inertia”. They are designed to provide
150% braking torque (peak at max speed for DC drives, constant for AC drives) for 1800 rpm base speed motors.
Galvanized NEMA1 with Normally Closed Thermostat
CyCLIC DUTy
NEMA 1 DB resistor kits include a wall mount enclosure with built-in junction box, a terminal strip, a normally closed thermal contact (klixon switch) and resistors pre-wired with high-temperature Teflon wire.
These heavy-duty kits have been designed to provide dynamic braking for cyclic and continuous braking applications. There are three levels available: 10%, 25% and 50%. These levels refer to the continuous allowable braking level (ie. 25% equals 25% of rated motor braking torque) or the maximum allowable duty cycle rates with maximum specified “on-time” limitations
(refer to illustration below).
Duty Cycle
Dynamic Braking for AC Drives
AC drives provide a constant torque stopping profile when a dynamic brake resistor is applied across the DC bus circuit. Dynamic braking can be employed under a stop command or anytime a decrease in motor speed is commanded, provided the AC drive is enabled and programmed for ramp stop (fast ramp mode).
415
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
DB Resistors for AC Drives
The brake is active anytime the system is enabled.
Therefore, the braking circuit must be protected with an overload device. The Commander SK, Commander GP20 and Unidrive SP drives are equipped standard with built-in dynamic braking transistors. Simply select the proper braking resistor needed for the size of drive and duty cycle.
Overload Protection
E-STOP DUTy - PANEL MOUNT
Control Techniques E-Stop duty panel mount dynamic braking resistors provide the energy dissipation required for a drive system while keeping the installation as compact as possible.
416
INTERNAL DYNAMIC BRAKING RESISTORS
The Commander SK, Commander
GP20 and Unidrive SP Size 0, 1 and 2 can be equipped with a zero-space, heatsink mountable
DB resistors.
Size 1 Unidrive SP heatsink shown
INTERNAL DYNAMIC BRAKING RESISTORS
Commander SK (size 2), GP20 and Unidrive SP
Frame Size DC Resistance Power Rating Order Code
0 70 W 50W SM-Heatsink-DBR0
1 75 W 50W SM-Heatsink-DBR1
2 37.5 W 100W SM-Heatsink-DBR2
Panel Mounted DB Resistor
Specifications for AC Drives
Panel Mounted, 18” High Temperature Silicone Leads
Drive
Order Code
DST12xx
SKA1xxxxxx
SKB1xxxxxx
SKBDxxxxxx
SKCD200220
SKDD200300
SKD3200400
SP0xxx z12xx y22xx
SKB34xxxxx
SKC3400220
SKC3400300
SKC3400400
SKD34xxxxx
SP04xx z1401 z1402 z1403 z1404 z1405 z1406
Case Resistor
Order Code
DBR-0500-00300-P
DBR-1200-00300-P
DBR-0500-00300-P
DBR-0500-00300-P
DBR-0500-00300-P
DBR-0300-00400-P
DBR-0300-00400-P
DBR-0500-00300-P
DBR-0500-00300-P
DBR-0300-00400-P
DBR-1200-00300-P
DBR-1200-00300-P
DBR-0600-00400-P
DBR-0600-00400-P
DBR-0600-00400-P
DBR-1200-00300-P
DBR-1200-00300-P
DBR-1200-00300-P
DBR-1200-00300-P
DBR-1200-00300-P
DBR-0600-00400-P
DBR-0600-00400-P
Dimensions (in.)
H x W x D
9 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
12 x 3 x 1.5
12 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
12 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
12 x 3 x 1.5
12 x 3 x 1.5
12 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
9 x 3 x 1.5
12 x 3 x 1.5
12 x 3 x 1.5
DRIVE ORDER CODE LEGEND y= SK for Commander SK, or CGP for Commander GP20,
or SP for Unidrive SP z= CGP for Commander GP20, or SP for Unidrive SP
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Enclosed DB Resistor
Specifications for AC Drives
Galvanized NEMA1 with Normally Closed Thermostat
DRIVE ORDER CODE LEGEND y= SK for Commander SK, or CGP for Commander GP20,
or SP for Unidrive SP z= CGP for Commander GP20, or SP for Unidrive SP
COMMANDER SK, COMMANDER GP20 & UNIDRIVE SP DRIVES
Duty Cycle / Order Code / Dimensions (H x W x D in inches)
230 VAC
Drive
Order Code
E-Stop Duty
Order Code
Dimensions
HxWxD
10% Duty Cycle
Order Code
Dimensions
HxWxD
25% Duty Cycle
Order Code
Dimensions
HxWxD
50% Duty Cycle
Order Code
Dimensions
HxWxD
SKB1100075* DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4 DBR-0400-00500-ENC 5x14x7 DBR-0400-00500-ENC 5x14x7
SKB1100110* DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4 DBR-0400-00500-ENC 5x14x7 DBR-0400-01000-ENC 5x14x10 z1203 z1204 y2201 y2202 y2203 y3201 y3202 y4201 y4202 y4203
SP5201
SP5202
SKA1200025 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4
SKA1200037 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4
SKA1200055 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4
SKA1200075 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-00600-ENC 5x14x7
SKBD200110 DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4 DBR-0400-00500-ENC 5x14x7 DBR-0400-01000-ENC 5x14x10
SKBD200150 DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4 DBR-0400-00500-ENC 5x14x7 DBR-0400-01000-ENC 5x14x10
SKCD200220 DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4 DBR-0400-01000-ENC 5x14x10 DBR-0400-01000-ENC 5x14x10
SKDD200300 DBR-0200-00400-ENC 5x14x4 DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13
SKD3200400 DBR-0200-00400-ENC 5x14x4 DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13
SP0201 DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4 DBR-0400-00300-ENC 5x14x4
SP0202
SP0203
DBR-0400-00300-ENC
DBR-0400-00300-ENC
5x14x4
5x14x4
DBR-0400-00300-ENC
DBR-0400-00300-ENC
5x14x4
5x14x4
DBR-0400-00300-ENC
DBR-0400-00500-ENC
5x14x4
5x14x7
DBR-0400-00500-ENC
DBR-0400-00500-ENC
5x14x7
5x14x7
SP0204
SP0205 z1201 z1202
DBR-0400-00300-ENC
DBR-0400-00300-ENC
DBR-0500-00300-ENC
DBR-0500-00300-ENC
5x14x4
5x14x4
5x14x4
5x14x4
DBR-0400-00300-ENC
DBR-0400-00300-ENC
DBR-0500-00300-ENC
DBR-0500-00300-ENC
5x14x4
5x14x4
5x14x4
5x14x4
DBR-0400-00500-ENC
DBR-0400-00500-ENC
DBR-0500-00500-ENC
DBR-0500-00500-ENC
5x14x7
5x14x7
5x14x7
5x14x7
DBR-0400-00500-ENC
DBR-0500-01500-ENC
DBR-0500-01500-ENC
DBR-0500-01500-ENC
5x14x7
5x14x13
5x14x13
5x14x13
DBR-0500-00300-ENC
DBR-0400-00300-ENC
DBR-0200-00400-ENC
DBR-0200-00400-ENC
DBR-0200-00400-ENC
DBR-0055-00600-ENC
DBR-0055-00600-ENC
DBR-0055-02000-ENC
DBR-0055-02000-ENC
DBR-0055-02000-ENC
DBR-0055-02000-ENC
DBR-0055-02000-ENC
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x7
5x14x7
5x14x13
5x14x13
5x14x13
5x14x13
5x14x13
DBR-0500-00300-ENC
DBR-0400-00300-ENC
DBR-0200-00600-ENC
DBR-0200-00600-ENC
DBR-0200-00600-ENC
DBR-0055-02000-ENC
DBR-0055-02000-ENC
DBR-0055-02000-ENC
DBR-0055-03000-ENC
DBR-0055-03000-ENC
DBR-0055-03000-ENC
DBR-0055-04500-ENC
5x14x4
5x14x4
5x14x7
5x14x7
5x14x7
5x14x13
5x14x13
5x14x13
5x21x13
5x21x13
5x21x13
5x28x13
DBR-0500-00500-ENC
DBR-0350-01500-ENC
DBR-0200-01500-ENC
DBR-0200-01500-ENC
DBR-0200-01500-ENC
DBR-0055-03000-ENC
DBR-0055-03000-ENC
DBR-0055-04500-ENC
DBR-0055-06000-ENC
DBR-0055-06000-ENC
DBR-0055-09000-ENC
5x14x7
5x14x13
5x14x13
5x14x13
5x14x13
5x21x13
5x21x13
5x28x13
7x29x18
7x29x18
7x29x18
DBR-0500-01500-ENC
DBR-0350-01500-ENC
DBR-0200-01500-ENC
DBR-0200-03000-ENC
DBR-0200-03000-ENC
DBR-0055-04500-ENC
DBR-0055-06000-ENC
DBR-0055-09000-ENC
DBR-0055-09000-ENC
5x14x13
5x14x13
5x14x13
5x28x13
5x28x13
5x28x13
7x29x18
7x29x18
7x29x18
DBR-0055-12000-ENC 14x29x18
DBR-0055-18000-ENC 14x29x18
DBR-0055-12000-ENC 14x29x18 DBR-0055-18000-ENC 14x29x18
*115V input
For larger drives and SPM modules please consult factory.
417
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Enclosed DB Resistor
Specifications for AC Drives
Galvanized NEMA1 with Normally Closed Thermostat
418
COMMANDER SK, COMMANDER GP20 & UNIDRIVE SP DRIVES
Duty Cycle / Order Code / Dimensions (H x W x D in inches)
460 VAC
Drive
Order Code
E-Stop Duty
Order Code
SKB3400037 DBR-1200-00300-ENC
SKB3400055 DBR-1200-00300-ENC
Dimensions
HxWxD
10% Duty Cycle
Order Code
Dimensions
HxWxD
25% Duty Cycle
Order Code
Dimensions
HxWxD
50% Duty Cycle
Order Code
Dimensions
HxWxD
5x14x4 DBR-1200-00300-ENC 5x14x4 DBR-1200-00300-ENC 5x14x4 DBR-1200-00300-ENC 5x14x4
5x14x4 DBR-1200-00300-ENC 5x14x4 DBR-1200-00300-ENC 5x14x4 DBR-1200-00800-ENC 5x14x7 y3402 y3403 y4401 y4402 y4403 y5401 y5402 y6401 y6402 z1404 z1405 z1406 y2401 y2402 y2403 y2404 y3401
SP0401
SP0402
SP0403
SP0404
SP0405 z1401 z1402 z1403
SKB3400075 DBR-1200-00300-ENC
SKB3400110 DBR-1200-00300-ENC
SKB3400150 DBR-1200-00300-ENC
SKC3400220 DBR-1200-00300-ENC
SKC3400300 DBR-0600-00400-ENC
SKC3400400 DBR-0600-00400-ENC
SKD3400550 DBR-0600-00400-ENC
SKD3400750 DBR-0600-00400-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-0800-00300-ENC
DBR-0800-00300-ENC
DBR-0800-00300-ENC
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-0600-00400-ENC
DBR-0600-00400-ENC
DBR-0600-01000-ENC
DBR-0600-01000-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-0800-00300-ENC
DBR-0800-00300-ENC
DBR-0800-00300-ENC
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x10
5x14x10
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
5x14x4
DBR-1200-00800-ENC
DBR-1200-00800-ENC
DBR-1200-00800-ENC
DBR-1200-01500-ENC
DBR-0600-01500-ENC
DBR-0600-01500-ENC
DBR-0600-01500-ENC
DBR-0600-01500-ENC
DBR-1200-00300-ENC
DBR-1200-00300-ENC
DBR-1200-00800-ENC
DBR-1200-00800-ENC
DBR-1200-00800-ENC
DBR-0800-00600-ENC
DBR-0800-00600-ENC
DBR-0800-00600-ENC
5x14x7
5x14x7
5x14x7
5x14x13
5x14x13
5x14x13
5x14x13
5x14x13
5x14x4
5x14x4
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
DBR-1200-00800-ENC
DBR-1200-00800-ENC
DBR-1200-00800-ENC
DBR-1200-00800-ENC
DBR-0800-00600-ENC
5x14x7
DBR-1200-01500-ENC 5x14x13
DBR-1200-01500-ENC 5x14x13
DBR-1200-01500-ENC 5x14x13
DBR-0600-01500-ENC 5x14x13
DBR-0600-03000-ENC 5x28x13
DBR-0600-03000-ENC 5x28x13
DBR-0600-04500-ENC 7x29x18
DBR-1200-00300-ENC 5x14x4
5x14x7
5x14x7
5x14x7
DBR-1200-01500-ENC 5x14x13
DBR-0800-00600-ENC 5x14x7
5x14x7
DBR-0800-01500-ENC 5x14x13
DBR-0800-00300-ENC
DBR-0600-00400-ENC
DBR-0600-00400-ENC
DBR-0200-00600-ENC
5x14x4 DBR-0800-00300-ENC 5x14x4 DBR-0800-01500-ENC 5x14x13 DBR-0800-01500-ENC 5x14x13
5x14x4 DBR-0600-00600-ENC 5x14x7 DBR-0600-01500-ENC 5x14x13 DBR-0600-01500-ENC 5x14x13
5x14x4 DBR-0600-00600-ENC 5x14x7 DBR-0600-01500-ENC 5x14x13 DBR-0600-03000-ENC 5x28x13
5x14x7 DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13
DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13 DBR-0200-04500-ENC 7x29x18
DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13 DBR-0200-06000-ENC 7x29x18
DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13 DBR-0200-04500-ENC 7x29x18 DBR-0200-09000-ENC 7x29x18
DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13 DBR-0200-04500-ENC 7x29x18 DBR-0200-09000-ENC 7x29x18
DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13 DBR-0200-06000-ENC 7x29x18 DBR-0200-09000-ENC 7x29x18
DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13 DBR-0200-06000-ENC 7x29x18 DBR-0200-12000-ENC 14x29x18
DBR-0120-03000-ENC 5x21x13 DBR-0120-03000-ENC 5x21x13 DBR-0120-09000-ENC 7x29x18 DBR-0120-18000-ENC 14x29x18
DBR-0120-03000-ENC 5x21x13 DBR-0120-04500-ENC 5x28x13 DBR-0120-12000-ENC 14x29x18 DBR-0120-18000-ENC 14x29x18
DBR-0100-03000-ENC 5x21x13 DBR-0100-06000-ENC 7x29x18 DBR-0100-12000-ENC 14x29x18 DBR-0100-24000-ENC 14x29x18
DBR-0100-04500-ENC 5x28x13 DBR-0100-06000-ENC 7x29x18 DBR-0100-18000-ENC 14x29x18 DBR-0100-36000-ENC 21x29x18
DBR-0100-06000-ENC 7x29x18 DBR-0100-09000-ENC 7x29x18 DBR-0100-24000-ENC 14x29x18 DBR-0100-36000-ENC 21x29x18
DBR-0055-06000-ENC 7x29x18 DBR-0055-12000-ENC 14x29x18 DBR-0055-24000-ENC 14x29x18 DBR-0055-50000-ENC 28x29x18
DBR-0055-09000-ENC 7x29x18 DBR-0055-12000-ENC 14x29x18 DBR-0055-36000-ENC 21x29x18 DBR-0055-60000-ENC 35x29x18
For larger drives and SPM modules please consult factory.
DRIVE ORDER CODE LEGEND y= SK for Commander SK, or CGP for Commander GP20,
or SP for Unidrive SP z= CGP for Commander GP20, or SP for Unidrive SP
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Enclosed DB Resistor
Specifications for AC Drives
Galvanized NEMA1 with Normally Closed Thermostat
575 VAC
Drive
Order Code
SP3501
SP3502
SP3503
SP3504
SP3505
SP3506
SP3507
575 VAC or
690 VAC
Drive
Order Code
SP4601
SP4602
SP4603
SP4604
SP4605
SP4606
SP5601
SP5602
SP6601
SP6602
UNIDRIVE SP DRIVES
460 VAC
Drive
Order Code
SP6411
SP6412
E-Stop Duty
Order Code
Dimensions
HxWxD
Duty Cycle / Order Code / Dimensions (H x W x D in inches)
10% Duty Cycle
Order Code
Dimensions
HxWxD
25% Duty Cycle
Order Code
Dimensions
HxWxD
50% Duty Cycle
Order Code
Dimensions
HxWxD
DBR-0055-06000-ENC 7x29x18 DBR-0055-12000-ENC 14x29x18 DBR-0055-24000-ENC 14x29x18 DBR-0055-50000-ENC 28x29x18
DBR-0055-09000-ENC 7x29x18 DBR-0055-12000-ENC 14x29x18 DBR-0055-36000-ENC 21x29x18 DBR-0055-60000-ENC 35x29x18
SP7411
SP7412
SP8411
SP8412
SP8413
SP8414
SP9411
SP9413
SP9414
SP9415
DBR-0055-12000-ENC 14x29x18
DBR-0055-12000-ENC 14x29x18
2x DBR-0055-06000-ENC 7x29x18
2x DBR-0055-09000-ENC 7x29x18
2x DBR-0055-12000-ENC 14x29x18
2x DBR-0055-12000-ENC 14x29x18
4x DBR-0055-06000-ENC 7x29x18
4x DBR-0055-09000-ENC 7x29x18
4x DBR-0055-12000-ENC 14x29x18
4x DBR-0055-12000-ENC 14x29x18
Call Factory
E-Stop Duty
Order Code
DBR-0200-00600-ENC
DBR-0200-00600-ENC
Dimensions
HxWxD
Duty Cycle / Order Code / Dimensions (H x W x D in inches)
10% Duty Cycle
Order Code
Dimensions
HxWxD
25% Duty Cycle
Order Code
Dimensions
HxWxD
50% Duty Cycle
Order Code
Dimensions
HxWxD
5x14x7 DBR-0200-00600-ENC 5x14x7 DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13
5x14x7 DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13
DBR-0200-00600-ENC
DBR-0200-00600-ENC
5x14x7 DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13
5x14x7 DBR-0200-00600-ENC 5x14x7 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13
DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13 DBR-0200-04500-ENC 7x29x18
DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13 DBR-0200-03000-ENC 5x28x13 DBR-0200-06000-ENC 7x29x18
DBR-0200-01500-ENC 5x14x13 DBR-0200-01500-ENC 5x14x13 DBR-0200-04500-ENC 7x29x18 DBR-0200-09000-ENC 7x29x18
E-Stop Duty
Order Code
Dimensions
HxWxD
Duty Cycle / Order Code / Dimensions (H x W x D in inches)
10% Duty Cycle
Order Code
Dimensions
HxWxD
25% Duty Cycle
Order Code
Dimensions
HxWxD
50% Duty Cycle
Order Code
Dimensions
HxWxD
DBR-0150-01500-ENC 5x14x13 DBR-0150-01500-ENC 5x14x13 DBR-0150-04500-ENC 5x28x13 DBR-0150-09000-ENC 7x29x18
DBR-0150-01500-ENC 5x14x13 DBR-0150-03000-ENC 5x21x13 DBR-0150-06000-ENC 7x29x18 DBR-0150-09000-ENC 7x29x18
DBR-0150-01500-ENC 5x14x13 DBR-0150-03000-ENC 5x21x13 DBR-0150-06000-ENC 7x29x18 DBR-0150-12000-ENC 14x29x18
DBR-0150-03000-ENC 5x21x13 DBR-0150-03000-ENC 5x21x13 DBR-0150-09000-ENC 7x29x18 DBR-0150-18000-ENC 14x29x18
DBR-0150-03000-ENC 5x21x13 DBR-0150-04500-ENC 5x28x13 DBR-0150-12000-ENC 14x29x18 DBR-0150-18000-ENC 14x29x18
DBR-0150-03000-ENC 5x21x13 DBR-0150-06000-ENC 7x29x18 DBR-0150-12000-ENC 14x29x18 DBR-0150-24000-ENC 21x29x18
DBR-0120-4500-ENC
DBR-0120-4500-ENC
5x28x13 DBR-0120-06000-ENC
5x28x13 DBR-0120-09000-ENC
7x29x18
7x29x18
DBR-0120-18000-ENC 14x29x18
DBR-0120-24000-ENC 14x29x18
DBR-0120-36000-ENC 21x29x18
DBR-0120-36000-ENC 21x29x18
DBR-0130-06000-ENC 7x29x18 DBR-0120-12000-ENC 14x29x18 DBR-0120-24000-ENC 14x29x18 DBR-0120-50000-ENC 28x29x18
DBR-0130-06000-ENC 7x29x18 DBR-0120-12000-ENC 14x29x18 DBR-0120-36000-ENC 21x29x18 DBR-0130-60000-ENC 35x29x18
For larger drives and SPM modules please consult factory.
DRIVE ORDER CODE LEGEND y= SK for Commander SK, or CGP for Commander GP20,
or SP for Unidrive SP z= CGP for Commander GP20, or SP for Unidrive SP
419
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Enclosed DB Resistor
Specifications for Servo Drives
DIGITAx ST, EPSILON EP, MDS & EN DRIVES
420
Galvanized NEMA1 with Normally
Closed Thermostat
Drive/Module
Order Code
DST1201
DST1202
DST1203
DST1204
DST1401
DST1402
DST1403
DST1404
DST1405
EP202
EP204
EP206
EP209
EP216
MP-1250
MP-2500
MP-5000
EN-204*
EN-208*
EN-214*
Drive
Kw
Internal Energy
Absorption (Joules)
0.8
1.4
2
3
0.5
1.2
1.6
2.3
26/7 (115V/230V)
52/14 (115V/230V)
52/14 (115V/230V)
78/21 (115V/230V)
13/4 (115V/230V)
13/4 (115V/230V)
13/4 (115V/230V)
13/4 (115V/230V)
4.1
0.77
13/4 (115V/230V)
39/8 (115V/230V)
1.27
58/12 (115V/230V)
1.77
97/20 (115V/230V)
2.32
117/24 (115V/230V)
2.32/4.8 132/28 (115V/230V)
12.5
236/110 (230V/460V)
25 393/183(230V/460V)
50 629/293(230V/460V)
1.8
150/79 (115V/230V)
3.6
5.2
150/79+50W
(115V/230V)
150/79+50W
(115V/230V)
20
DB Resistor Options
Heatsink/Internally
Mounted
500 Watt
(UL Listed)
500 Watt
Min resistance
(Ohm)
30
20
30
30
28
30
30
30
111
111
75
28
23
23
23
16
9
20
20
Order Code
(UL Listed)
Watts Ohms Order Code Ohms Dimensions
(HxWxD)
DBR0**
DBR0**
DBR0**
DBR0**
DBR0**
DBR0**
DBR0** 50 70 DBR-0800-00600-ENC 80 5x14x7
DBR0** 50 70 MS-530-00-000 30 13.7x3.4x9.7 DBR-0400-00500-ENC 40 5x14x7
DBR0** 50 70 MS-530-00-000 30 13.7x3.4x9.7 DBR-0400-00500-ENC 40 5x14x7
DBR1**
DBR1**
DBR1**
DBR1**
50
50
50
50
50
50
50
50
50
50
70 MS-530-00-000
70 MS-530-00-000
70 MS-530-00-000
70 MS-530-00-000
70
70
33 MS-530-00-000
33 MS-530-00-000
33 MS-530-00-000
33 MS-530-00-000
MS-530-00-000
MS-530-00-000
MS-510-00-000
ES-20-500
ES-20-500
Order Code Ohms Dimensions
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
DBR-1200-00800-ENC 120 5x14x7
DBR-1200-00800-ENC 120 5x14x7
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0200-00600-ENC 20
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0400-00500-ENC 40
30 13.7x3.4x9.7 DBR-0200-00600-ENC 20
20
20
7x14x5
7x14x5
(HxWxD)
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
5x14x7
ES-20-500 20 7x14x5
DB Resistor Options
1k Watt 2k Watt 3k Watt
Drive/Module
Order Code
Order Code Watts Ohms Dimensions
(HxWxD)
Order Code Watts Ohms Dimensions
(HxWxD)
Order Code Watts Ohms Dimensions
(HxWxD)
DST1201
DST1202
DST1203 DBR-0400-01000-ENC 1000 40 5x14xx10
DST1204 DBR-0400-01000-ENC 1000 40 5x14xx10
DST1401
DST1402
DST1403
DST1404
DST1405
EP202
EP204
EP206
EP209
EP216
DBR-0400-01000-ENC 1000 40 5x14xx10
DBR-0200-01500-ENC 1500 20 5x14xx13 DBR-0200-03000-ENC 3000 20 5x28x13
MP-1250 DBR-0400-01000-ENC 1000 40 5x14xx10 DBR-0300-02000-ENC 2000 30 5x21x10
MP-2500 DBR-0400-01000-ENC 1000 40 5x14xx10 DBR-0300-02000-ENC 2000 30 5x21x10
MP-5000 DBR-0200-01500-ENC 1500 20 5x14xx13 DBR-0100-02000-ENC 2000 10 5x14x13 DBR-0150-03000-ENC 3000 15 5x21x13
EN-204*
EN-208*
EN-214*
ES-20-1K
ES-20-1K
ES-20-1K
1000
1000
1000
20
20
20
13x14x5
13x14x5
13x14x5
ES-20-2K
ES-20-2K
ES-20-2K
2000
2000
2000
20
20
20
13x14x5
13x14x5
13x14x5
* Requires RSR-2 Module and External Resistor
**For the complete order code add the prefix SM-HEATSINK — i.e. SM-HEATSINK-DBR0 or SM-HEATSINK-DBR1
For Unidrive SP drives see the AC Drive DB Resistors tables
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
DB Resistors for DC Drives
E-stop duty dynamic braking resistors are available to provide for the fast stopping of DC motors.
Quantum III DC drives come supplied with a DB
Resistor Pole, which is conveniently located adjacent to the either A- on non-regen models, or A+ in regen models.
DB resistors are shipped loose and mounted external to the drive (by customer). NEMA 1 Enclosure is
Galvanized Steel and meets UL508A standard.
230 VAC DB Resistors
HP
5
7.5
10
15
20
25
30
40
50
60
75
100
125
Order Code
8200-00100
8200-00101
8200-00102
8200-00103
8200-00104
8200-00105
8200-00106*
8200-00107*
8200-00108*
8200-00109*
8200-00110*
8200-00111*
8200-00112*
Chassis
Dimensions (in.)
H x W x D
10.25 x 2 x 2.75
14 x 4 x 5
14 x 10 x 5
14 x 13 x 5
Order Code
005-4301
005-4302
005-4303
005-4304
005-4305
005-4306
005-4307
005-4308
005-4309
005-4310
005-4311
005-4312
NEMA 1
Dimensions (in.)
H x W x D
5 x 14 x 4
5 x 14 x 7
5 x 14 x 4
5 x 14 x 10 n/a
460 VAC DB Resistors
Chassis
Dimensions (in.)
H x W x D
NEMA 1
HP
Order Code Order Code
Dimensions (in.)
H x W x D
25
30
40
50
60
5-7.5
10
15
20
75
100
125
150
200
250
8200-00115
8200-00116
8200-00117
8200-00118
8200-00119
8200-00120
8200-00121
8200-00122
8200-00124*
8200-00125*
8200-00126*
8200-00127*
8200-00128*
8200-00129*
10.25 x 2 x 2.75
10.25 x 2 x 5.5
14 x 7 x 5
14 x 10 x 5
14 x 13 x 5
The DC Dynamic braking components have been sized for occasional non-repeated use, assuming load inertia is equal to or less than motor inertia. The Dynamic resistor will be sized at approximately 150% of rated motor current. The DB enclosures are galvanized NEMA 1
005-4351
005-4352
005-4353
005-4354
005-4355
005-4356
005-4357
005-4358
005-4359
005-4360
005-4361
005-4362
005-4363
005-4364
005-4365
5 x 12 x 4
5 x 14 x 7
5 x 14 x 10
5 x 14 x 13
5 x 21 x 10 enclosure shipped loose and mounted external to the drive to meet UL508A standard. The DC drive will also require a DB contactor option for dynamic braking action.
* Resistor is wall mounted, not panel mounted. 421
422 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
ISOLATION TRANSFORMERS
Drive isolation transformers add an extra margin of protection for AC and DC drives. They are sized to the drive KVA requirements and are designed to withstand the mechanical stresses of current reversals and short circuits associated with power semiconductor type AC and DC drives.
• Three coil, delta-wye configuration
with fully rated NEMA 1 enclosure
• ±5% fully rated taps on primary winding
• Ambient temperature: 40°C (104°F)
• Standards: ANSI C89.2, NEMA ST-20,
UL506, UL1561
Isolation Transformers:
Provide electrical isolation between the incoming line and the drive electronics.
Convert input line voltage to standard drive input voltages.
Minimize line disturbances caused by SCR power converters.
Reduce power line harmonics caused by drives.
Protect the motor controller by reducing available short circuit potential. This may be a UL requirement in installations with high levels of short circuit potential.
HP KVA Primary Secondary Voltage
Voltage 230 VAC 460 VAC
Wt.* Size
(lbs.)
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
7.5
230
11
460
230
14
460
230
20
460
230
27
460
230
34
460
230
40
460
230
51
460
230
63
460
230
75
460
230
93
460
230
460
118
230
460
145
230
460
175
230
460
200
250
220
230
460
275
230
460
300 330
230
460
400 440 460
500 550 460
8812-0007-1 8812-0007-2
8812-0007-3 8812-0007-4
8812-0011-1 8812-0011-2
8812-0011-3 8812-0011-4
8812-0015-1
8812-0015-3
8812-0020-1
8812-0015-2
8812-0015-4
8812-0020-2
8812-0020-3 8812-0020-4
8812-0027-1 8812-0027-2
8812-0027-3 8812-0027-4
8812-0034-1 8812-0034-2
8812-0034-3 8812-0034-4
8812-0040-1 8812-0040-2
8812-0040-3 8812-0040-4
8812-0051-1 8812-0051-2
152
230
310
A
B
8812-0051-3 8812-0051-4
8812-0063-1 8812-0063-2
8812-0063-3 8812-0063-4
8812-0075-1 8812-0075-2
480
C
8812-0075-3 8812-0075-4
8812-0093-1 8812-0093-2
8812-0093-3 8812-0093-4
8812-0118-1 8812-0118-2
600
8812-0118-3 8812-0118-4
8812-0145-1 8812-0145-2
8812-0145-3
8812-0175-1
8812-0145-4
8812-0175-2
760
D
1100
8812-0175-3 8812-0175-4
8812-0220-1 8812-0220-2
8812-0220-3 8812-0220-4
8812-0275-1 8812-0275-2
1200
E
1300
8812-0275-3 8812-0275-4
8812-0330-1 8812-0330-2
XXX
8812-0330-3 8812-0330-4 2200 F
XXX 8812-0440-4
8812-0550-4 2900
* Approximate shipping weight.
Size
A
B
C
D
E
F
Order String
Dims. (in.) H x W x D
25 x 20.125 x 14.125
30.125 x 20.125 x 14.125
39.375 x 26.125 x 19.125
46.5 x 26.125 x 20.125
56 x 31.25 x 24.25
75 x 44.5 x 36
8812 – 0 0 0 7 – 1
Isolation Transformer
Pri / Sec Voltage Rating (VAC):
KVA Rating
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
ELECTROMAGNETIC COMPATIBILITY FILTERS
EMC filters are used to minimize high frequency power supply line disturbances caused by PWM AC drives that may interfere with proper operation of sensitive electronic equipment. These specific filters have been assessed for conformance with the EMC directive by testing with the appropriate CT drives.
EMC data sheets are available for digital drive products.
These data sheets list the applicable harmonized standards and give recommended installation techniques and further information on EMC behavior in typical situations. The filters are built and tested to the safety standard EN-33200 and to meet NEMA 1 standards.
Mounting Style
• Bookend: filter mounts next to the drive with the
smallest dimension being the width of the filter
• Footprint: filter mounts between the drive heatsink
and the panel or enclosure
• Panel: filter mounts on the panel near the drive
Filter Type
• Low Leakage: designed for use in industrial or
residential applications* with motor lead lengths
<15 m (49 ft)
• Standard: designed for use in industrial or residential
applications* with motor lead lengths <75 m (246 ft)
* As defined by CE standards for EMC compliance
IS
O 9
002
A PPROV
A
L
Commander SL, Commander SK / External, Surface Mount EMC Standard Filter Selection
Drive
Order Code
RFI Filter
Order Code
Mounting Style
115 VAC, Single Phase 50/60 Hz Input
SKA1100025 4200-6122
Footprint/Bookend
SKA1100037 4200-6122
SKB1100075 4200-6216
Footprint/Bookend
SKB1100110 4200-6216
230 VAC, Single Phase 50/60 Hz Input wA1200025 wA1200037 wA1200055 wA1200075 wBD200110 wBD200150 wCD200220
SKDD200300
4200-6122
4200-6122
4200-6122
4200-6122
4200-6212
4200-6212
4200-6310
4200-6409
230 VAC, 3-Phase 50/60 Hz Input wBD200110 wBD200150
4200-6213 wCD200220
SKD3200400
SKDD200300
4200-6213
4200-6311
4200-6411
4200-6411
460 VAC, 3-Phase 50/60 Hz Input wB3400037 wB3400055 wB3400075 wB3400110 wB3400150 wC3400220 wC3400400
SKD3400550
SKD3400750
4200-6213
4200-6213
4200-6213
4200-6213
4200-6213
4200-6311
4200-6411
4200-6411
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Current
(A)
12
27
10
14
12
20
24
24
10
14
24
Dims. (in.)
H x W x D
8 x 3 x 1.6
10.2 x 3.2 x 1.6
8 x 3 x 1.6
8 x 3 x 1.6
12.2 x 3.7 x 1.8
16.4 x 4.5 x 2.0
10.2 x 3.2 x 1.6
12.2 x 3.7 x 1.8
Consult Factory
16.4 x 4.5 x 2.0
10.2 x 3.2 x 1.6
12.2 x 3.7 x 1.8
Consult Factory
Weight
Lbs.
0.9
1.5
0.9
1.3
1.9
3.6
1.4
1.7
3.4
1.4
1.7
423
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
424
Commander SL, Commander SK / External, Surface Mount EMC Low Leakage Filter Selection
Drive RFI Filter
Mounting Style
Order Code Order Code
Current
(A)
Dims. (in.)
H x W x D
115 VAC, Single Phase 50/60 Hz Input
SKA1100025 4200-6123
Footprint/Bookend
SKA1100037 4200-6123
230 VAC, Single Phase 50/60 Hz Input wA1200025 wA1200037 wA1200055
4200-6123 wA1200075 wBD200110 wBD200150 wCD200220
SKDD200300
4200-6214
4200-6312
4200-6410
230 VAC, 3-Phase 50/60 Hz Input wBD200110 wBD200150 wCD200220
SKD3200400
SKDD200300
4200-6215
4200-6217
4200-6412
4200-6412
460 VAC, 3-Phase 50/60 Hz Input wB3400037 wB3400055 wB3400075 wB3400110 wB3400150 wC3400220 wC3400400
SKD3400550
SKD3400750
4200-6215
4200-6215
4200-6215
4200-6215
4200-6215
4200-6217
4200-6217
4200-6412
4200-6412
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
12
12
20
24
24
10
14
24
10
14
8 x 3 x 1.6
8 x 3 x 1.6
8 x 3 x 1.6
12.2 x 3.7 x 1.8
16.4 x 4.5 x 2.0
10.2 x 3.2 x 1.6
12.2 x 3.7 x 1.8
Consult Factory
16.4 x 4.5 x 2.0
10.2 x 3.2 x 1.6
12.2 x 3.7 x 1.8
Consult Factory
Weight
Lbs.
0.9
1.0
1.4
2.0
3.6
1.4
1.6
3.4
1.4
1.6
Commander SK, Commander GP20 and Unidrive SP / External, Surface Mount EMC Filter Selection
Drive
Order Code
RFI Filter
Order Code
Mounting Style
Current
(A)
Dims. (in.)
H x W x D
Weight
Lbs.
230 VAC, Single Phase 50/60 Hz Input
SP0201-SP0205 4200-6000 Footprint/Bookend
230 VAC, 3-Phase 50/60 Hz Input
SP0201-SP0205 z1201 z1202 z1203 z1204 y2201 y2202 y2203 y3201 y3202
4200-6001
4200-6118
4200-6118
4200-6119
4200-6119
4200-6210
4200-6210
4200-6210
4200-6307
4200-6307
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend y4201 y4202 y4203
SP5201
SP5202
4200-6406
4200-6406
4200-6406
4200-6503
4200-6503
Footprint/Bookend
Footprint/Bookend
19
17
10
16
32
75
101
164
14.1 x 2.4 x 1.2
14.1 x 2.4 x 1.2
17.4 x 4 x 1.8
17.4 x 4 x 1.8
17 x 6.1 x 2.2
16.3 x 10 x 2.4
11.8 x 9 x 4
11.8 x 9.8 x 4.7
1.4
1.4
3.1
3.1
4.4
7.7
8.8
15
DRIVE ORDER CODE LEGEND w=SL for Commander SL, or SK for Commander SK y= SK for Commander SK, or CGP for Commander GP20, or SP for Unidrive SP z= CGP for Commander GP20, or SP for Unidrive SP
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Commander SK, Commander GP20 and Unidrive SP / External, Surface Mount EMC Filter Selection
Drive
Order Code
RFI Filter
Order Code
Mounting Style
460 VAC, 3-Phase 50/60 Hz Input
SP0401-SP0405 z1401
4200-6002 Footprint/Bookend z1402 z1403
4200-6118
4200-6118
4200-6118
Footprint/Bookend z1404 z1405 z1406
4200-6118
4200-6119
4200-6119
4200-6210
Footprint/Bookend y2401 y2402 y2403 y2404
4200-6210
4200-6210
4200-6210
Footprint/Bookend y3401 y3402 y3403 y4401 y4402 y4403 y5401 y5402 y6401
4200-6305
4200-6305
4200-6305
4200-6406
4200-6406
4200-6406
4200-6503
4200-6503
4200-6603
Footprint/Bookend
Footprint/Bookend
Footprint/Bookend y6411 y6402 y3502 y3503
4200-6309
4200-6309
4200-6309
Footprint/Bookend y6412 4200-6603
575 VAC & 690 VAC, 3-Phase 50/60 Hz Input y3501
4200-6603
4200-6603 y3504 y3505 y3506 y3507 y4601
4200-6309
4200-6309
4200-6309
4200-6309
4200-6408
4200-6408
Footprint/Bookend y4602 y4603 y4604 y4605
4200-6408
4200-6408
4200-6408
Footprint/Bookend y4606 y5601 y5602 y6601 y6602
4200-6408
4200-6504
4200-6504
4200-6604
4200-6604
Footprint/Bookend
Footprint/Bookend
Current
(A)
11
10
16
32
62
101
164
260
30
58
95
Dims. (in.)
H x W x D
14.1 x 2.4 x 1.2
17.4 x 4 x 1.8
17 x 6.1 x 2.2
16.3 x 10 x 2.4
11.8 x 9 x 4
11.8 x 9.8 x 4.8
11.6 x 9 x 5.4
16.3 x 10 x 2.4
11.8 x 9 x 4
11.8 x 9 x 4
Consult Factory
Weight
Lbs.
1.4
3.1
3.1
4.4
7.7
8.8
15
11.6
7.7
8.4
9.7
DRIVE ORDER CODE LEGEND y= SK for Commander SK, or CGP for Commander GP20, or SP for Unidrive SP z= CGP for Commander GP20, or SP for Unidrive SP
Notes: A zero-space EMC filter adequate for most applications is standard on the drive.
Alternate filters are available on request.
425
426 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Mentor / EMC Filter Selection
Drive
Order Code
M25x-14M
M45x-14M
M75x-14M
M105x-14M
M155x-14M
M210x-14M
M350x-14M
M420x-14M
M550x-14M
M700x-14M
M825x-14M
M900x-14M
M1200x-14M
M1850x-14M
RFI Filter
Catalog Number
4200-6116
4200-6116
4200-6117
4200-6106
4200-6107
4200-6111
4200-6115
Mounting Style
Bookend
Bookend
Bookend
Bookend
Bookend
Bookend
Quantum / EMC Filter Selection
Drive
Order Code
9500-8x02
9500-8x03
9500-8x05
9500-8x06
9500-8x07
9500-8x08
9500-8x09
9500-8x10
9500-8x11
9500-8x15
9500-8x16
9500-8x17
9500-8x18
9500-8x19
9500-8x20
RFI Filter
Catalog Number
4200-6116
4200-6116
4200-6106
4200-6107
4200-6112
4200-6115
Mounting Style
Bookend
Bookend
Bookend
Bookend
Bookend
Current
(A)
50
63
100
150
180
300
Consult Factory
Current
(A)
50
100
150
220
300
Consult Factory
Dimensions (in.)
H x W x D
13.3 x 3.9 x 3.5
14.8 x 4.0 x 5.9
15 x 4.2 x 5.9
16.3 x 5.3 x 6.9
19.8 x 6.2 x 6.7
25.8 x 6.1 x 9.0
Dimensions (in.)
H x W x D
13.3 x 3.94 x 3.54
15 x 4.21 x 5.91
16.3 x 5.32 x 6.89
20.6 x 6.18 x 6.69
25.8 x 6.14 x 9.06
Weight
Lbs.
9
9
17
33
35
Weight
Lbs.
9
9
17
17
33
35
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
LINE AND LOAD REACTORS
Line reactors (sometimes called line chokes) are a common power accessory for electronic variable speed drives. These components add an extra margin of protection for AC and DC drives. Load reactors are also used on the output of AC Drives to reduce the effects of high motor wiring capacitance and to “soften” the dv / dt (high rates of change of voltage) applied to the motor windings.
Voltage 600 VAC maximum
Ambient Temperature 40°C (104°F)
Overload
Standards
200% for 3 minutes
CSA
UL / cUL Recognized
Reactors in AC drive applications:
• Help meet IEEE 519 criteria by reducing harmonic
distortion of the input line current.
• Improve input line current balance.
• Reduce nuisance drive over-voltage trips caused
by transient voltage spikes and power line notches.
• Protect input rectifiers from in-rush current caused
by sudden power line surges and sags.
• Extend the life of the DC bus capacitor bank by
reducing the internal heating caused by ripple
current.
• Protect motor windings from long lead effects
when used on the drive output.
Line Reactors in DC drive applications:
• Minimize crosstalk between multiple SCR drives by
reducing line notching and subsequent dv/dt
misfiring / bridge failures.
• Eliminate SCR failures caused by high dv/dt
levels associated with stiff or power factor
corrected power lines.
• Protect other line-powered sensitive electronic
equipment by filtering electrical noise / interference
caused by drives on the power line.
Order String
xxx x – x – xxx – x
C = Open Chassis
E = Enclosed Chassis
Current Rating
L = Low Impedance (3% Typical)
H = High Impedance (5% Typical)
Voltage: 2 = 230V, 4 = 460V, 5 = 575V
LR = Line Reactor
LDR = Load Reactor
427
428 efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Commander SK Line and Load Reactor Selection
Motor Power (HP)
3.0
5
460 VAC 3Ø
0.5
0.75
1
1.5
2
3
5
7.5
10
115 VAC 1Ø
0.33
0.5
230 VAC 1Ø
0.33
0.5
0.75
1.0
230 VAC 3Ø
1.5
2
3
1.5
2.0
3.0
3.0
Order Code
SKA1100025
SKA1100037
SKA1200025
SKA1200037
SKA1200055
SKA1200075
SKBD200110
SKBD200150
SKCD200220
SKDD200300
SKBD200110
SKBD200150
SKCD200220
SKDD200300
SKD3200400
SKB3400037
SKB3400055
SKB3400075
SKB3400110
SKB3400150
SKC3400220
SKC3400400
SKD3400550
SKD3400750
Line Reactor
Input Line Reactor
Order Code
Current (A)
Load Reactor
Output Load Reactor
Order Code
LDR2-L-004-X
LDR2-L-004-X
4402-0224
4402-0224
4402-0225
4402-0225
4402-0225
4402-0226
4402-0226
4402-0226
LR2-L-010-X
LR2-L-015-X
LR2-L-022-X
LR2-L-015-X
LR2-L-022-X
LR4-L-003-X
LR4-L-003-X
LR4-L-003-X
LR4-L-005-X
LR4-L-008-X
LR4-L-011-X
LR4-L-014-X
LR4-L-014-X
LR4-L-021-X
6.5
6.5
15.1
15.1
15.1
26.2
26.2
26.2
9.6
15.2
22
15.2
22
3.4
3.4
3.4
4.8
7.6
11
14
14
21
LDR2-L-004-X
LDR2-L-004-X
LDR2-L-004-X
LDR2-L-006-X
LDR2-L-006-X
LDR2-L-010-X
LDR2-L-015-X
LDR2-L-015-X
LDR2-L-006-X
LDR2-L-010-X
LDR2-L-015-X
LDR2-L-015-X
LDR2-L-022-X
LDR4-L-003-X
LDR4-L-003-X
LDR4-L-003-X
LDR4-L-003-X
LDR4-L-005-X
LDR4-L-008-X
LDR4-L-014-X
LDR4-L-014-X
LDR4-L-021-X
Current (A)
4.2
4.2
6
9.6
15.2
15.2
4.2
4.2
4.2
6
6
9.6
15.2
15.2
22
4.8
7.6
14
14
21
3.4
3.4
3.4
3.4
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Line and Load Reactor Selection
DRIVE ORDER CODE LEGEND w=SL for Commander SL, or SK for Commander SK y= SK for Commander SK, or
CGP for Commander GP20, or SP for Unidrive SP z= CGP for Commander GP20, or SP for Unidrive SP
Line Reactor
150
200
575 VAC 3Ø
5
5
25
30
40
50
60
7.5
10
15
20
75
100
125
150
60
460 VAC 3Ø
1.5
2
15
20
20
25
30
40
50
60
75
100
150
3
5
5
7.5
10
Motor Power (HP)
Normal Duty
230 VAC 3Ø
Heavy Duty
1.5
2
3
4
5
7.5
10
15
20
25
30
40
50
4
5
7.5
10
15
20
25
1
1.5
2
4
30
40
50
10
15
20
25
30
30
50
3
4
1
2
5
5
10
60
75
100
125
150
150
10
15
20
25
3
5
5
7.5
30
40
50
60
75
100
125
Drive
Order Code y2402 y2403 y2404 y3401 y3402 y3403 y4401 z1401 z1402 z1403 z1404 z1405 z1406 y2401 y4402 y4403 y5401 y5402 y6401 y6402 z1201 z1202 z1203 z1204 y2201 y2202 y2203 y3201 y3202 y4201 y4202 y4203 y5201 y5202 y3501 y3502 y3503 y3504 y3505 y3506 y3507 y4603 y4604 y4605 y4606 y5601 y5602 y6601 y6602
Input Line Reactor
Order Code
For larger horsepower Unidrive SP drives please consult factory.
LR2-L-010-X
LR2-L-015-X
LR2-L-022-X
LR2-L-022-X
LR2-L-022-X
LR2-L-028-X
LR2-L-042-X
LR2-L-054-X
LR2-L-068-X
LR2-L-080-X
LR2-L-080-X
LR2-L-104-X
LR2-L-130-X
LR2-L-154-X
LR5-L-009-X
LR5-L-009-X
LR5-L-011-X
LR5-L-017-X
LR5-L-022-X
LR5-L-027-X
LR5-L-027-X
LR5-L-041-X
LR5-L-041-X
LR5-L-052-X
LR5-L-062-X
LR5-L-099-X
LR5-L-099-X
LR5-L-144-X
LR5-L-192-X
LR4-L-005-X
LR4-L-008-X
LR4-L-008-X
LR4-L-011-X
LR4-L-011-X
LR4-L-014-X
LR4-L-021-X
LR4-L-027-X
LR4-L-034-X
LR4-L-034-X
LR4-L-040-X
LR4-L-052-X
LR4-L-065-X
LR4-L-065-X
LR4-L-096-X
LR4-L-124-X
LR4-L-156-X
LR4-L-156-X
LR4-L-240-X
LR4-L-302-X
Current
(A)
27
34
34
40
52
65
65
4.8
7.6
7.6
11
11
14
21
96
124
156
156
240
302
22
28
42
54
68
80
80
9.6
15.2
22
22
104
130
154
22
27
27
41
41
52
62
9
9
11
17
99
99
144
192
Load Reactor
Output Load Reactor
Order Code
Current (A)
LDR4-L-003-X
LDR4-L-005-X
LDR4-L-008-X
LDR4-L-008-X
LDR4-L-011-X
LDR4-L-011-X
LDR4-L-021-X
LDR4-L-021-X
LDR4-L-034-X
LDR4-L-034-X
LDR4-L-040-X
LDR4-L-052-X
LDR4-L-065-X
LDR4-L-077-X
LDR4-L-096-X
LDR4-L-124-X
LDR4-L-156-X
LDR4-L-180-X
LDR4-L-240-X
LDR4-L-240-X
LDR2-L-006-X
LDR2-L-010-X
LDR2-L-010-X
LDR2-L-015-X
LDR2-L-022-X
LDR2-L-022-X
LDR2-L-028-X
LDR2-L-042-X
LDR2-L-054-X
LDR2-L-077-X
LDR2-L-096-X
LDR2-L-130-X
LDR2-L-130-X
LDR2-L-154-X
LDR5-L-006-X
LDR5-L-006-X
LDR5-L-009-X
LDR5-L-011-X
LDR5-L-017-X
LDR5-L-022-X
LDR5-L-027-X
LDR5-L-041-X
LDR5-L-041-X
LDR5-L-052-X
LDR5-L-062-X
LDR5-L-099-X
LDR5-L-099-X
LDR5-L-144-X
LDR5-L-192-X
21
34
34
40
52
65
77
3.4
4.8
7.6
7.6
11
11
21
96
124
156
180
240
240
22
22
28
42
54
77
96
6
9.6
9.6
15.2
130
130
154
17
22
27
41
6.1
6.1
9
11
41
52
62
99
99
144
192
429
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor www.emersonct.com
800-893-2321
Mentor Line Reactor Selection
MODE
▲
▲
AME
TER
DAT
A
AME
TER
Dri ve Read
Zero spee Run
Run forw rever ard se Brid ge 1
Brid
At s
Cur ge 2 pee rent lim
RE
SET
Line Reactor
Drive
Order Code
M25x-14M
M45x-14M
M75x-14M
M105x-14M
M155x-14M
M210x-14M
M350x-14M
M420x-14M
M550x-14M
M700x-14M thru M1850x-14M
Input Line Reactor
Order Code
230 VAC
LR2-L-022-X
LR2-L-042-X
LR2-L-068-X
LR2-L-104-X
LR2-L-130-X
LR2-L-192-X
LR2-L-312-X
LR2-L-360-X
LR2-L-480-X
Current
(A)
Input Line Reactor
Order Code
460 VAC
130
192
312
360
22
42
68
104
LR4-L-021-X
LR4-L-040-X
LR4-L-065-X
LR4-L-096-X
LR4-L-156-X
LR4-L-180-X
LR4-L-302-X
LR4-L-361-X
480 LR4-L-477-X
Consult Factory
Current
(A)
156
180
302
361
477
21
40
65
96
430
Quantum Line Reactor Selection
Drive
Order Code
9500-8x02
9500-8x03
9500-8x05
9500-8x06
9500-8x07
9500-8x08
9500-8x09
9500-8x10
9500-8x11 thru 9500-8x20
MOD
▲
▲
PAR
TER
PAR
TER
IND
EX
Drive Rea
Alarm
Zero
Run
spe
forw ed
Run
reve ard dy
Brid
Brid
At sp ge 1 ge 2 eed rse
RES
ET
Line Reactor
Input Line Reactor
Order Code
230 VAC
LR2-L-042-X
LR2-L-054-X
LR2-L-104-X
LR2-L-154-X
LR2-L-248-X
LR2-L-312-X
LR2-L-360-X
LR2-L-480-X
Current
(A)
Input Line Reactor
Order Code
460 VAC
42
54
104
154
LR4-L-034-X
LR4-L-052-X
LR4-L-096-X
LR4-L-156-X
248
312
LR4-L-240-X
LR4-L-302-X
360 LR4-L-361-X
480 LR4-L-477-X
Consult Factory
Current
(A)
240
302
361
477
34
52
96
156
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project