CO-AX Toslink 2 Way Converter - ID# Operation Manual

CO-AX Toslink 2 Way Converter - ID# Operation Manual
CO-AX Toslink 2 Way
Converter - ID# 645
Operation Manual
Introduction
Coaxial to Toslink two way converter designed to accept an S/PDIF audio input
through either Coaxial cable or Toslink cable, and passes the signal (as is) to
both the Coaxial and Toslink output ports.
An example of use might be that you have a DVD player with Coaxial audio
output only, but you want to connect it to your Audio Amplifier using Toslink
cable. To accomplish this you can connect the DVD Player via Coaxial to the
unit, and then output via Toslink to your audio amplifier.
The unit has a built in amplification feature which makes it suitable to use as an
Toslink or Coaxial audio signal repeater allowing you to extend the transferring
distance. If using as a repeater, simply connect your device to one of the Input
ports, and Output to your audio equipment using the equivalent Output port (eg
Toslink in/ Toslink out, Coaxial in/Coaxial out).
The unit has a Input selection switch which allows you to quickly and easily
select the desired Input from Coaxial or Toslink input ports. This means that you
can connect two devices at the same time, and switch between them for output
to your audio device. You can also choose to Output to both Coaxial and Toslink
output ports simultaneously. This allows you to select a connected device, and
for example output to two different Audio Amplifiers (one via Toslink, one via
Coaxial).
Features
●
Supports two-way conversion: Coaxial to Toslink or Toslink to Coaxial.
●
Supports input audio signal from 2 channels up to 5.1 channels, output
signal follows input.
●
Supports amplification of S/PDIF audio and extends the transferring
distance, through coaxial and/or Toslink cables.
●
Select one input from Coaxial or Toslink input ports, and send S/PDIF
audio signal to both Coaxial and Toslink output ports simultaneously.
●
Compact size and easy to install.
Operating Functions
and
Controls
Input Panel
Output Panel
Input Panel:
1. Coaxial Input:
Connect to the output port of your S/PDIF audio source such as DVD
player or amplifier, using Coaxial cable.
2. Toslink Input:
Connect to the output port of your S/PDIF audio source such as DVD
player or amplifier, using Toslink (optical fiber) cable.
Output Panel:
1. Toslink Output:
Connect to the input port of your S/PDIF audio equipment such as
amplifier, using Toslink (optical fiber) cable.
2. Coaxial Output:
Connect to the output port of your S/PDIF audio equipment such as
amplifier, using Coaxial cable.
Switcher Panel
Upper Panel
Switcher Panel:
1. Input Selection:
Use this mini switcher to select input from Coaxial or Toslink input ports.
2. Power:
Plug the power supply into DCT-2 unit and connect the adaptor to AC
wall outlet.
Upper Cover:
1. Power LED:
The LED will illuminate when the power supply is connected.
Installation
Specifications
•
•
•
•
•
Input: I x Coaxial RCA Jack and 1 x Toslink (optical fiber) port
Output: 1 x Coaxial RCA Jack and I x Toslink (optical fiber) port
Power: DC 5V / I A, center positive
Dimension: 42(W) x 40.5(D) x 22(H) mm
Weight: 25g (adaptor not included)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement