User manual | RemoteMix 4™ FEATURES Broadcast Field Mixer

RemoteMix 4™
7 kHz
Broadcast Field Mixer
FEATURES
2
3.5
4
»» HD Voice (Wide-Band Speech)
•
•
•
»» XLR Mic Jacks
2
3
4
»» Switchable 48 Volt Phantom
Power for each Mic Input
•
»» Mic/Line Pad: On Channel
2
3
3,4
»» ¼” Headphone Jacks with
Individual Level Controls
2
3
4
»» 3.5 mm Send and Receive Jacks
•
•
•
»» LED VU Meter
•
•
•
»» Phone Line Hybrid with DTMF
Keypad with Redial
•
•
•
•
•
•
•
•
•
»» Universal PBX Handset Interface
»» Wired Phone Headset Interface
•
»» Bluetooth Wireless Technology
»» Bass Boost
•
»» Dual 9 Volt Batteries
•
•
•
»» 100-240 VAC External AC
Power Supply
•
•
•
Remote Mix 2 and RemoteMix 3.5 shown for comparison
2 = RemoteMix 2
3.5 = RemoteMix 3.5
© 2016, JK Audio, Inc.
1311 E. 6th St. Sandwich, IL. 60548 4 = RemoteMix 4
800.552.8346 • 815.786.2929
Se Habla Español
More than just a Field Mixer. RemoteMix 4 is a fourchannel field mixer and headphone amplifier. More
than just a field mixer, this is a universal communications
interface. RemoteMix 3.5 features a phone line hybrid
and keypad, a PBX handset interface, and both wired and
wireless cell phone interfaces. These parts were designed
to work together, saving setup time in the field.
Radio. RemoteMix 4 is perfect for sports remotes. Use it
as a phone line hybrid, calling into your studio talk show
hybrid. Use it as a front-end mixer for your POTS, ISDN, IP
or smart phone codec.
TV. RemoteMix 4 gives you the ultimate phone
connectivity with four ¼” IFB headphone feeds. Send and
receive interview audio and pull IFB out of any business
phone system, even your cell phone or notebook.
Great Sound. A soft limiter prevents overdriving the
phone line interfaces, while the mixer XLR output is prelimiter (full range). Convenient 3.5mm send and receive
jacks for recording the show, or mixing in your MP3
player.
Bluetooth Wireless Technology. Route audio through
your cell phone or notebook using Bluetooth Wireless
Technology. The Bluetooth interface will connect in
hands free mode allowing a two way 3.4 kHz telecom
bandwidth connection. The Bluetooth interface can also
connect in wireless headphone mode offering a 20 kHz
audio bandwidth, listen-only connection.
Power Smart Design. Low noise, low power ICs are used
throughout either of these mixers to preserve battery
life. The low noise 100-240 VAC desktop style power
supply (included) overrides the battery power only when
the supply is actually providing power. If the power goes
out, the batteries automatically cut in. 20 kHz audio
bandwidth, listen-only connection. The phantom power
generator in the RemoteMix 4 only runs if any of the rear
panel 48 V switches are set to “ON”.
jkaudio.com
[email protected]
JK Audio
RemoteMix 4™
7 kHz
Broadcast Field Mixer
#
Q
*
A
*
ALT
1 2
W E
4 5
S D
7 8
Z X
3
R
6
F
9
C
(
T
/
G
?
V
_ - +
Y U I O
”
; ’
:
H J K L
.
! ,
B N M $
)
@
P
DEL
MIC
00:00:00
L
R
D
PLAY/REC
Talk about backup...
OR
MENU
5 ways to get the signal back to the station.
REAR VIEW
A. Dial in with the internal phone line
hybrid,
B. Connect through any PBX or VoIP telephone through the Universal Handset
Interface,
E
C. Plug into the headset jack of your
B
A
C
phone or notebook,
D. Pair to any Bluetooth audio device
E. Use as a front end mixer for your
OR
CODEC
1
2
3
4
5
6
7
8
9
*
0
#
CUE
#
Q
*
A
*
ALT
1 2
W E
4 5
S D
7 8
Z X
3
R
6
F
9
C
(
T
/
G
?
V
_ - +
Y U I O
”
; ’
:
H J K L
.
! ,
B N M $
)
CODEC.
@
P
DEL
OR
IP
CODEC
Phantom
XLR
Input
1
Master
Output
Master
3.5 mm
Stereo
Output
Bass Boost
Phantom
XLR
Input
2
LED
Meter
Limiter
Headphone
1
Bluetooth
Phantom
XLR
Input
3
Headphone
2
Handset
Jack
Mic / Line
Headphone
3
Universal
Handset
Interface
Headphone
4
Phantom
XLR
Input
4
Return
Phone
Line
Hybrid
Mic / Line
Wireless Phone
Cue Input
Headphone Cue
Headset
Emulator
DTMF
Keypad
BLOCK DIAGRAM
Phone Line
3.5 mm Line Input
SPECIFICATIONS
Input
Output
Female XLR Mics:
2k ohms / -25 dBu nom
(Mic/Line pad switch = +6 dBu max)
1/8” (3.5mm) Stereo Line:
20k ohms / -10 dBu nom
Headphone Cue 1/4”:
20k ohms / -10 dBu nom
Frequency Response:
Range:
1/8” (3.5mm) Stereo:
Headphone 1/4” Stereo:
Phone Line Connector:
Bluetooth Wireless Technology
Standard:
Balanced Male XLR:
Bluetooth 3.0
HF: full duplex voice, 300Hz – 3.4kHz
HF (HD): full duplex HD voice, 50Hz – 7kHz
A2DP: 30Hz – 17kHz, master to slave
800.552.8346 • 815.786.2929
Se Habla Español
8 ohms / 1/3 watt per channel
POTS: RJ11C, PBX: RJ22
0.5B REN
Isolation:
1500 VAC
Power:
Weight:
© 2016, JK Audio, Inc.
1311 E. 6th St. Sandwich, IL. 60548 100 ohms / -10 dBu nom
Ringer:
Size:
33 ft (10m)
+16 dBu max, 20 Hz - 20 kHz, +/- 1dB
jkaudio.com
[email protected]
100-240 VAC, 50-60Hz
or Two 9 VDC batteries
9.5” x 8” x 3”
3.8 lbs (1.72 kg)
JK Audio

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project