PDF 763 kB
N I - 2 1 0 0 D ATA S H E E T
NetLinx® Controllers
NI-2100 NetLinx®
Integrated
Controller
The NI-2100 is ideal for control and automation of medium-sized rooms and multi-room applications.
The NI-2100 has 64MB of onboard RAM and is Device Discovery enabled to simplify programming by
standardizing device and function definitions, default touch panel button assignments, and control and
feedback methods.
VERSATILE CONTROL
The NI-2100 offers a competitive solution with the capability to control various devices such as DVD players, projectors,
lights, thermostats and more in home theaters, hotels, classrooms, auditoriums and other environments.
• 4 IR / Serial output ports
• 4 Digital I/O channels
• 4 Relay channels
• 3 Configurable RS-232 / RS-422 / RS-485 Serial ports
• Optional ICSNet Capability (requires optional ICSNet card)
• 1 Ethernet 10/100 Port
• 1 AXLink Bus Connector
• 404 MIPS processor speed
• 64 MB RAM
• 128 MB CompactFlash (upgradeable to 1 G)
• 1 MB Non-Volatile Memory
• Device Discovery enabled
N I - 2 1 0 0 D ATA S H E E T
NI-2100 (FG2105-04)
POWER
I/O LEDS
DIGITAL I/O (PORT 9)
700 mA @ 12 VDC
Four yellow LEDs light when the I/O channels 1-4 are
active on Port 9.
•
•
MEMORY
64 MB SDRAM
1 MB of Non-volatile SRAM
• 128 MB Compact Flash (upgradeable to 1 GB factory
programmed)
REAR PANEL COMPONENTS:
POWER CONNECTOR
ENCLOSURE
ETHERNET 10/100 PORT
Metal with black matte finish
•
•
•
DIMENSIONS (HWD)
3 1/2” x 17” x 3 1/2” (8.8 cm x 43.2 cm x 8.8 cm)
• 2 rack unit high
•
WEIGHT
4.50 lbs (2.04 kg)
CERTIFICATIONS
FCC Part 15 Class B
CE
• IEC 60950
•
•
PROCESSING POWER
32-bit microprocessor
404 MIPS
• Real-time operating system
•
•
FRONT PANEL COMPONENTS:
LED INDICATORS
LNK/ACT: Green LED lights when the Ethernet cables
are connected and terminated correctly and blinks
when receiving Ethernet data packets.
• Status: Green LED blinks to indicate that the system
is programmed and communicating properly.
• Output: Red LED blinks when the Master transmits
data, sets channels on and off, sends data strings, etc.
• Input: Yellow LED blinks when the Master receives
data from button pushes, strings, commands,
channel levels, etc.
•
RS-232/422/485 LEDS
Three sets of red and yellow LEDs light to indicate
Ports 1-3 are transmitting or receiving RS-232,
422, or 485 data
• TX LEDs (red) blink when transmitting data.
• RX LEDs (yellow) blink when receiving data.
• LED activity reflects transmission and reception activity
2-pin (male) green captive-wire connector for 12 VDC
power supply.
RJ-45 Ethernet 10/100 connector. Automatically
negotiates connection speed and whether to use half or
full duplex mode.
• Ethernet Protocols used by NI-2100:
- ICSP - peer to peer protocol used for both master-tomaster and master-to-device communications.
- ICMP - To connect over a network, ping an NI-2100.
- Telnet - NetLinx telnet server provides a mechanism
to configure and diagnose a NetLinx system.
- HTTP - NI-2100 has a built-in web server that
complies with the HTTP 1.0 specification and supports
all of the required features of HTTP v1.1.
- FTP - NI-2100 has a built-in FTP server that
conforms to RFC959.
- integration! Solutions - integration! Solutions feature
uses port 10500 for the XML based communication
protocol.
Four red LEDs light to indicate the relay channels 1-4
are active (closed) on Port 4.
IR/SERIAL (PORTS 5-8)
Each output is capable of two electrical formats:
IR or Serial
• Four IR/Serial data signals can be generated
simultaneously
• Supports up to 1.142 MHz carrier frequency
•
INCLUDED ACCESSORIES
NI-2100 Quick Start Guide
2-pin 3.5 mm mini-Phoenix (female) PWR connector
(41-5025)
• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector
(41-5047)
• 6-pin 3.5 mm mini-Phoenix female I/O connector
(41-5063)
• 8-pin 3.5 mm mini-Phoenix female Relay connector
(41-5083)
• Two CC-NIRC IR Emitters (FG10-000-11)
• Two removable rack ears (62-2105-07)
• One 8-pin Relay Common Strip (41-2105-01)
• Four rack mount screws (80-0186)
• Four washers (80-0342)
•
•
AXLINK CONNECTOR
OPTIONAL ACCESSORIES
Black 4-pin (male) captive-wire connector for connecting
external AxLink devices
• Axlink - 4-wire network (20.8 kbps) connects up to
255 Axcess devices, operates up to 3,000 feet of
wiring and supplies 12 VDC power.
•
•
PROGRAM PORT
DB-9 (male) connector that supports RS-232 communications to a PC for system programming and diagnostics.
CONFIGURATION DIP SW
8-position DIP switch for setting the baud rate for Program
Port. Baud rate settings are: 9600, 38,400 (default),
57,600, and 115,200 bps.
•
RELAY LEDS
4-channel binary I/O port for contact closure
Each input is capable of 0-5 VDC voltage sensing.
Input format is software selectable
ID BUTTON
Pushbutton sets device address ID (in conjunction with
NetLinx Studio v1.2 build 200 or higher).
NXA-ICSNet Card (FG2105-10)
CSB Cable Support Bracket (FG517)
• PSN6.5 - 12 VDC Power Supply (FG423-41)
• CC-N232 RS232/422 Cables
• CC-NIRC IR Cables (FG10-000-11)
• CC-NREL Relay Cables
• CC-NSER IR/Serial Cables
• Upgrade Compact Flash (factory programmed with
firmware):
- NXA-CF2NI256M - 256 MB flash upgrade for NI-2100,
NI-3100 & NI-4100 (FG2116-47)
- NXA-CF2NI512M - 512 MB flash upgrade for NI-2100,
NI-3100 & NI-4100 (FG2116-48)
- NXA-CF2NI1G - 1 GB flash upgrade for NI-2100,
NI-3100 & NI-4100 (FG2116-49)
• STS, Serial to Screw Terminal (FG959)
• NCK, NetLinx Connector Kit (FG2902)
• 2-pin, 3.5mm Black Male Phoenix Connector (41-5021)
•
RS-232/422/485: (PORTS 1-3)
Three RS-232/422/485 control ports using DB-9 (male)
connectors with XON/XOFF (transmit on/transmit off), CTS/
RTS (clear to send/request to send), and 300-115,200 baud.
RELAY (PORT 4)
4-channel single-pole single throw relay ports
Each relay is independently controlled
• Supports up to 4 independent external relay devices.
• Each relay can switch up to 24 VDC or 28 VAC @ 1 A.
IR/SERIAL LEDS
•
Four red LEDs light to indicate the IR/Serial channels
1-4 are transmitting control data on Ports 5-8.
•
3 0 0 0 RESEARCH DRI V E , RI CHARDSON, TX 75082 • 800. 2 2 2 . 0 1 9 3 • 4 6 9 . 6 2 4 . 8 0 0 0 • +1 . 4 6 9 . 6 2 4 . 7 4 0 0 • 4 6 9 . 6 2 4 . 7 1 5 3 f a x • w w w. a m x . c o m
N I - 2 1 0 0 D ATA S H E E T
3 1/2”
(8.8 cm)
3 5/8”
(9.1 cm)
19”
(48.3 cm)
NI-2100
(Front View)
17”
(43.2 cm)
3 1/2”
(8.8 cm)
NI-2100
(Top View)
NI-2100
(Right View)
WITHOUT OPTIONAL ICSNET CARD INSTALLED
(Back View)
WITH OPTIONAL ICSNET CARD INSTALLED
(Back View)
3 0 0 0 RESEARCH DRI V E , RI CHARDSON, TX 75082 • 800. 2 2 2 . 0 1 9 3 • 4 6 9 . 6 2 4 . 8 0 0 0 • +1 . 4 6 9 . 6 2 4 . 7 4 0 0 • 4 6 9 . 6 2 4 . 7 1 5 3 f a x • w w w. a m x . c o m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement